redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

iio: st_sensors: support active-low interrupts 

Most ST MEMS Sensors that support interrupts can also handle sending
an active low interrupt, i.e. going from high to low on data ready
(or other interrupt) and thus triggering on a falling edge to the
interrupt controller.

Set up logic to inspect the interrupt line we get for a sensor: if
it is triggering on rising edge, leave everything alone, but if it
triggers on falling edges, set up active low, and if unsupported
configurations appear: warn with errors and reconfigure the interrupt
to a rising edge, which all interrupt generating sensors support.

Create a local header for st_sensors_core.h to share functions
between the sensor core and the trigger setup code.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
hifive-unleashed-5.1
Linus Walleij 2015-11-19 10:15:17 +01:00 committed by Jonathan Cameron
parent c4f0ebd914
commit a9fd053b56
8 changed files with 101 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
drivers/iio/accel/st_accel_core.c
View File

@ -67,6 +67,8 @@
#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10
#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08
#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25
#define ST_ACCEL_1_IHL_IRQ_MASK 0x02
#define ST_ACCEL_1_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 2 */
@ -92,6 +94,8 @@
#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02
#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10
#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22
#define ST_ACCEL_2_IHL_IRQ_MASK 0x80
#define ST_ACCEL_2_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 3 */
@ -125,6 +129,8 @@
#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23
#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80
#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00
#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23
#define ST_ACCEL_3_IHL_IRQ_MASK 0x40
#define ST_ACCEL_3_IG1_EN_ADDR 0x23
#define ST_ACCEL_3_IG1_EN_MASK 0x08
#define ST_ACCEL_3_MULTIREAD_BIT false
@ -169,6 +175,8 @@
#define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22
#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04
#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20
#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22
#define ST_ACCEL_5_IHL_IRQ_MASK 0x80
#define ST_ACCEL_5_IG1_EN_ADDR 0x21
#define ST_ACCEL_5_IG1_EN_MASK 0x08
#define ST_ACCEL_5_MULTIREAD_BIT false
@ -292,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
},
.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
.bootime = 2,
@ -355,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
.mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
},
.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
.bootime = 2,
@ -430,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR,
.mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK,
.ig1 = {
.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
.en_mask = ST_ACCEL_3_IG1_EN_MASK,
@ -537,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
.mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
},
.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
.bootime = 2, /* guess */

6
drivers/iio/common/st_sensors/st_sensors_core.c
View File

@ -18,13 +18,15 @@
#include <asm/unaligned.h>
#include <linux/iio/common/st_sensors.h>
#include "st_sensors_core.h"
static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
{
return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8;
}
static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
u8 reg_addr, u8 mask, u8 data)
int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
u8 reg_addr, u8 mask, u8 data)
{
int err;
u8 new_data;

8
drivers/iio/common/st_sensors/st_sensors_core.h 100644
View File

@ -0,0 +1,8 @@
/*
* Local functions in the ST Sensors core
*/
#ifndef __ST_SENSORS_CORE_H
#define __ST_SENSORS_CORE_H
int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
u8 reg_addr, u8 mask, u8 data);
#endif

52
drivers/iio/common/st_sensors/st_sensors_trigger.c
View File

@ -14,32 +14,65 @@
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/interrupt.h>
#include <linux/iio/common/st_sensors.h>
#include "st_sensors_core.h"
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
{
int err;
int err, irq;
struct st_sensor_data *sdata = iio_priv(indio_dev);
unsigned long irq_trig;
sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
if (sdata->trig == NULL) {
err = -ENOMEM;
dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
goto iio_trigger_alloc_error;
return -ENOMEM;
}
err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
irq = sdata->get_irq_data_ready(indio_dev);
irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
/*
* If the IRQ is triggered on falling edge, we need to mark the
* interrupt as active low, if the hardware supports this.
*/
if (irq_trig == IRQF_TRIGGER_FALLING) {
if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
dev_err(&indio_dev->dev,
"falling edge specified for IRQ but hardware "
"only support rising edge, will request "
"rising edge\n");
irq_trig = IRQF_TRIGGER_RISING;
} else {
/* Set up INT active low i.e. falling edge */
err = st_sensors_write_data_with_mask(indio_dev,
sdata->sensor_settings->drdy_irq.addr_ihl,
sdata->sensor_settings->drdy_irq.mask_ihl, 1);
if (err < 0)
goto iio_trigger_free;
dev_info(&indio_dev->dev,
"interrupts on the falling edge\n");
}
} else if (irq_trig == IRQF_TRIGGER_RISING) {
dev_info(&indio_dev->dev,
"interrupts on the rising edge\n");
} else {
dev_err(&indio_dev->dev,
"unsupported IRQ trigger specified (%lx), only "
"rising and falling edges supported, enforce "
"rising edge\n", irq_trig);
irq_trig = IRQF_TRIGGER_RISING;
}
err = request_threaded_irq(irq,
iio_trigger_generic_data_rdy_poll,
NULL,
IRQF_TRIGGER_RISING,
irq_trig,
sdata->trig->name,
sdata->trig);
if (err) {
dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
goto request_irq_error;
goto iio_trigger_free;
}
iio_trigger_set_drvdata(sdata->trig, indio_dev);
@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
iio_trigger_register_error:
free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
request_irq_error:
iio_trigger_free:
iio_trigger_free(sdata->trig);
iio_trigger_alloc_error:
return err;
}
EXPORT_SYMBOL(st_sensors_allocate_trigger);

15
drivers/iio/gyro/st_gyro_core.c
View File

@ -185,6 +185,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.drdy_irq = {
.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
* for the DRDY line on INT2.
*/
},
.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
.bootime = 2,
@ -248,6 +253,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.drdy_irq = {
.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
* for the DRDY line on INT2.
*/
},
.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
.bootime = 2,
@ -307,6 +317,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.drdy_irq = {
.addr = ST_GYRO_3_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
* for the DRDY line on INT2.
*/
},
.multi_read_bit = ST_GYRO_3_MULTIREAD_BIT,
.bootime = 2,

4
drivers/iio/magnetometer/st_magn_core.c
View File

@ -175,6 +175,8 @@
#define ST_MAGN_3_BDU_MASK 0x10
#define ST_MAGN_3_DRDY_IRQ_ADDR 0x62
#define ST_MAGN_3_DRDY_INT_MASK 0x01
#define ST_MAGN_3_IHL_IRQ_ADDR 0x63
#define ST_MAGN_3_IHL_IRQ_MASK 0x04
#define ST_MAGN_3_FS_AVL_15000_GAIN 1500
#define ST_MAGN_3_MULTIREAD_BIT false
#define ST_MAGN_3_OUT_X_L_ADDR 0x68
@ -480,6 +482,8 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.drdy_irq = {
.addr = ST_MAGN_3_DRDY_IRQ_ADDR,
.mask_int1 = ST_MAGN_3_DRDY_INT_MASK,
.addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR,
.mask_ihl = ST_MAGN_3_IHL_IRQ_MASK,
},
.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
.bootime = 2,

8
drivers/iio/pressure/st_pressure_core.c
View File

@ -62,6 +62,8 @@
#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500
@ -100,6 +102,8 @@
#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23
#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
#define ST_PRESS_LPS25H_TEMP_OFFSET 42500
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
},
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
.bootime = 2,
@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
},
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
.bootime = 2,

4
include/linux/iio/common/st_sensors.h
View File

@ -119,6 +119,8 @@ struct st_sensor_bdu {
* @addr: address of the register.
* @mask_int1: mask to enable/disable IRQ on INT1 pin.
* @mask_int2: mask to enable/disable IRQ on INT2 pin.
* @addr_ihl: address to enable/disable active low on the INT lines.
* @mask_ihl: mask to enable/disable active low on the INT lines.
* struct ig1 - represents the Interrupt Generator 1 of sensors.
* @en_addr: address of the enable ig1 register.
* @en_mask: mask to write the on/off value for enable.
@ -127,6 +129,8 @@ struct st_sensor_data_ready_irq {
u8 addr;
u8 mask_int1;
u8 mask_int2;
u8 addr_ihl;
u8 mask_ihl;
struct {
u8 en_addr;
u8 en_mask;