1
0
Fork 0

V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300.

This is the first in a series of patches to add full WinTV-HVR1300
support to Linux. This first patch will enable analog TV support
and DVB-T support. Later patches will add the hardware MPEG encoder
support.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
hifive-unleashed-5.1
Steven Toth 2006-09-14 15:41:13 -03:00 committed by Mauro Carvalho Chehab
parent 1c2d034e3c
commit aa481a6547
6 changed files with 77 additions and 0 deletions

View File

@ -54,3 +54,4 @@
53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [0070:1404]
54 -> Norwood Micro TV Tuner
55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980]
56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602]

View File

@ -1280,6 +1280,29 @@ struct cx88_board cx88_boards[] = {
.gpio3 = 0x02000000,
}},
},
[CX88_BOARD_HAUPPAUGE_HVR1300] = {
.name = "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder",
.tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xe780,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xe780,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xe780,
}},
/* fixme: Add radio support */
.dvb = 1,
},
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
@ -1542,6 +1565,18 @@ struct cx88_subid cx88_subids[] = {
.subvendor = 0xc180,
.subdevice = 0xc980,
.card = CX88_BOARD_TE_DTV_250_OEM_SWANN,
},{
.subvendor = 0x0070,
.subdevice = 0x9600,
.card = CX88_BOARD_HAUPPAUGE_HVR1300,
},{
.subvendor = 0x0070,
.subdevice = 0x9601,
.card = CX88_BOARD_HAUPPAUGE_HVR1300,
},{
.subvendor = 0x0070,
.subdevice = 0x9602,
.card = CX88_BOARD_HAUPPAUGE_HVR1300,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
@ -1597,6 +1632,11 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
case 92000: /* Nova-SE2 (OEM, No Video or IR) */
case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
case 96019: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX/TX) */
case 96559: /* WinTV-HVR1300 (PAL Video, MPEG Video no IR) */
case 96569: /* WinTV-HVR1300 () */
case 96659: /* WinTV-HVR1300 () */
case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
/* known */
break;
@ -1723,6 +1763,22 @@ void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
core->name, i, cx88_boards[i].name);
}
void cx88_card_setup_pre_i2c(struct cx88_core *core)
{
switch (core->board) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
/* We leave here with the 702 on the bus */
cx_write(MO_GP0_IO, 0x0000e780);
udelay(1000);
cx_clear(MO_GP0_IO, 0x00000080);
udelay(50);
cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
udelay(1000);
break;
}
}
void cx88_card_setup(struct cx88_core *core)
{
static u8 eeprom[256];
@ -1752,6 +1808,7 @@ void cx88_card_setup(struct cx88_core *core)
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR1300:
if (0 == core->i2c_rc)
hauppauge_eeprom(core,eeprom);
break;

View File

@ -1133,6 +1133,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci)
/* init hardware */
cx88_reset(core);
cx88_card_setup_pre_i2c(core);
cx88_i2c_init(core,pci);
cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
cx88_card_setup(core);

View File

@ -319,6 +319,10 @@ static struct cx22702_config hauppauge_hvr1100_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static struct cx22702_config hauppauge_hvr1300_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
static int or51132_set_ts_param(struct dvb_frontend* fe,
int is_punctured)
@ -544,6 +548,16 @@ static int dvb_register(struct cx8802_dev *dev)
&dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr1300_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,

View File

@ -195,6 +195,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1300:
ir_codes = ir_codes_hauppauge_new;
ir_type = IR_TYPE_RC5;
ir->sampling = 1;
@ -417,6 +418,7 @@ void cx88_ir_irq(struct cx88_core *core)
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1300:
ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)

View File

@ -200,6 +200,7 @@ extern struct sram_channel cx88_sram_channels[];
#define CX88_BOARD_HAUPPAUGE_HVR3000 53
#define CX88_BOARD_NORWOOD_MICRO 54
#define CX88_BOARD_TE_DTV_250_OEM_SWANN 55
#define CX88_BOARD_HAUPPAUGE_HVR1300 56
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
@ -548,6 +549,7 @@ extern const unsigned int cx88_idcount;
extern void cx88_card_list(struct cx88_core *core, struct pci_dev *pci);
extern void cx88_card_setup(struct cx88_core *core);
extern void cx88_card_setup_pre_i2c(struct cx88_core *core);
/* ----------------------------------------------------------- */
/* cx88-tvaudio.c */