redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Third batch of cleanup for 4.1: 

- System Timer (ST) for at91rm9200 re-work (syscon/regmap):
   - watchdog
   - restart handler
   - timer as a proper clocksource
   => remove mach dependency + cleanup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJVBwXrAAoJEAf03oE53VmQZg8H/iYemk9W0f2+ehf5qzPLnPbP
 J2uBqm5yHegj0fHaSNBA179Zxq8niJaVXpKBb8C8LCfjPE75K/E9bSAFquyD6NNm
 mpwkRtxLjCVEAn5KsmXLEX044qNV4eCz9CdskUTQYW0nkW1egu+b1h/ILBaJKYp2
 kybInlyv+kXdbh/igh9mPe7psGth0yxOj6h+op8HtvHvwZ0TuFf2abcrvBCzR60n
 p+lyNusOMgYa4+a2tkFgypD//AY8A5sSkg0LnZv45SBfLObNu22JlR0AbtEensKJ
 uAkRwYD+d8A1KGC4NPA9Wlc2CiHO0yi/nQaEr/9pUjYLKUzMlQU8Rrehh+5moxw=
 =giqf
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/drivers

Merge "at91: cleanup for 4.1 #3" from Nicolas Ferre:

Third batch of cleanup for 4.1:
- System Timer (ST) for at91rm9200 re-work (syscon/regmap):
  - watchdog
  - restart handler
  - timer as a proper clocksource
  => remove mach dependency + cleanup

* tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (54 commits)
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ARM: at91: at91sam9: use SoC detection infrastructure
  ARM: at91: at91rm9200 use SoC detection infrastructure
  ARM: at91: add soc detection infrastructure
  ARM: at91/dt: introduce atmel,<chip>-dbgu
  ARM: at91: remove unused _matrix.h headers
  ARM: at91: remove unused at91_ioremap_matrix and header
  ARM: at91: remove NEED_MACH_IO_H
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
hifive-unleashed-5.1
Olof Johansson 2015-04-03 10:44:28 -07:00
parent 4580cb8a98 8590ca655a
commit aabab880c5
49 changed files with 925 additions and 1757 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/arm/atmel-at91.txt
View File

@ -46,10 +46,12 @@ PIT Timer required properties:
shared across all System Controller members.
System Timer (ST) required properties:
- compatible: Should be "atmel,at91rm9200-st"
- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
TC/TCLIB Timer required properties:
- compatible: Should be "atmel,<chip>-tcb".

3
Documentation/devicetree/bindings/serial/atmel-usart.txt
View File

@ -1,9 +1,10 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
Required properties:
- compatible: Should be "atmel,<chip>-usart"
- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.

5
Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
View File

@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.

2
arch/arm/Kconfig
View File

@ -361,9 +361,9 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91
select SOC_BUS
select USE_OF
help
This enables support for systems based on Atmel

8
arch/arm/boot/dts/at91rm9200.dtsi
View File

@ -356,9 +356,13 @@
};
st: timer@fffffd00 {
compatible = "atmel,at91rm9200-st";
compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
reg = <0xfffffd00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
watchdog {
compatible = "atmel,at91rm9200-wdt";
};
};
rtc: rtc@fffffe00 {
@ -830,7 +834,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91rm9200-usart";
compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

9
arch/arm/boot/dts/at91sam9260.dtsi
View File

@ -494,12 +494,12 @@
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
@ -753,7 +753,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
@ -853,7 +853,7 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -976,7 +976,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

11
arch/arm/boot/dts/at91sam9261.dtsi
View File

@ -124,11 +124,12 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&udc_clk>, <&udpck>;
clock-names = "usb_clk", "udc_clk", "udpck";
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
};
@ -262,7 +263,7 @@
};
matrix: matrix@ffffee00 {
compatible = "atmel,at91sam9260-bus-matrix";
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};
@ -275,7 +276,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

7
arch/arm/boot/dts/at91sam9263.dtsi
View File

@ -69,7 +69,7 @@
sram1: sram@00500000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
reg = <0x00500000 0x4000>;
};
ahb {
@ -762,7 +762,7 @@
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
@ -856,7 +856,7 @@
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
@ -905,7 +905,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

5
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -893,7 +893,7 @@
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
@ -1116,7 +1116,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1301,7 +1300,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};

3
arch/arm/boot/dts/at91sam9n12.dtsi
View File

@ -757,7 +757,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
@ -894,7 +894,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};

2
arch/arm/boot/dts/at91sam9rl.dtsi
View File

@ -377,7 +377,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

7
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -860,7 +860,7 @@
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
@ -1066,7 +1066,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
@ -1130,7 +1130,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1186,7 +1185,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

5
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -439,7 +439,7 @@
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
@ -1248,7 +1248,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
@ -1416,7 +1415,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

11
arch/arm/boot/dts/sama5d4.dtsi
View File

@ -66,6 +66,7 @@
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c2 = &i2c2;
};
cpus {
@ -259,7 +260,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
@ -461,8 +462,8 @@
lcdck: lcdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
reg = <3>;
clocks = <&mck>;
};
smdck: smdck {
@ -770,7 +771,7 @@
reg = <50>;
};
lcd_clk: lcd_clk {
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};
@ -1063,7 +1064,7 @@
};
dbgu: serial@fc069000 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfc069000 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";

1
arch/arm/configs/at91_dt_defconfig
View File

@ -70,6 +70,7 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_DM9000=y

2
arch/arm/configs/sama5_defconfig
View File

@ -3,8 +3,6 @@
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y

5
arch/arm/include/debug/at91.S
View File

@ -18,8 +18,11 @@
#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
#endif
/* Keep in sync with mach-at91/include/mach/hardware.h */
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */

20
arch/arm/mach-at91/Kconfig
View File

@ -24,7 +24,7 @@ config SOC_SAMA5
select GENERIC_CLOCKEVENTS
select MEMORY
select ATMEL_SDRAMC
select PHYLIB if NETDEVICES
select SRAM if PM
menu "Atmel AT91 System-on-Chip"
@ -77,10 +77,13 @@ if SOC_SAM_V4_V5
config SOC_AT91RM9200
bool "AT91RM9200"
select ATMEL_AIC_IRQ
select ATMEL_ST
select COMMON_CLK_AT91
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USB_CLK
select MIGHT_HAVE_PCI
select SRAM if PM
config SOC_AT91SAM9
bool "AT91SAM9"
@ -94,6 +97,7 @@ config SOC_AT91SAM9
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
select SRAM if PM
help
Select this if you are using one of those Atmel SoC:
AT91SAM9260
@ -116,20 +120,6 @@ endif # SOC_SAM_V4_V5
comment "AT91 Feature Selections"
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
select SRAM
depends on SUSPEND
help
Select this if you want Suspend-to-RAM to save the most power
possible (without powering off the CPU) by disabling the PLLs
and main oscillator so that only the 32 KiHz clock is available.
When only that slow-clock is available, some peripherals lose
functionality. Many can't issue wakeup events unless faster
clocks are available. Some lose their operating state and
need to be completely re-initialized.
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024

6
arch/arm/mach-at91/Makefile
View File

@ -2,18 +2,18 @@
# Makefile for the linux kernel.
#
obj-y := setup.o
obj-y := soc.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
obj-$(CONFIG_SOC_SAMA5) += sama5.o
# Power Management
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
obj-$(CONFIG_PM) += pm_suspend.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG

48
arch/arm/mach-at91/at91rm9200.c
View File

@ -8,60 +8,42 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include <mach/at91_st.h>
#include "generic.h"
#include "soc.h"
static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
{
/*
* Perform a hardware reset with the use of the Watchdog timer.
*/
at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
}
static void __init at91rm9200_dt_timer_init(void)
{
of_clk_init(NULL);
at91rm9200_timer_init();
}
static const struct at91_soc rm9200_socs[] = {
AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
{ /* sentinel */ },
};
static void __init at91rm9200_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(rm9200_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91rm9200_pm_init();
}
static const char *at91rm9200_dt_board_compat[] __initconst = {
"atmel,at91rm9200",
NULL
};
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
.init_time = at91rm9200_dt_timer_init,
.map_io = at91_map_io,
.init_machine = at91rm9200_dt_device_init,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END

78
arch/arm/mach-at91/at91sam9.c
View File

@ -7,29 +7,68 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/system_misc.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc at91sam9_socs[] = {
AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
"at91sam9m11", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
"at91sam9m10", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
"at91sam9g46", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
"at91sam9g45", "at91sam9g45"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
"at91sam9g15", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
"at91sam9g35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
"at91sam9x35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
"at91sam9g25", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
"at91sam9x25", "at91sam9x5"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
"at91sam9cn12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
"at91sam9n12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
"at91sam9cn11", "at91sam9n12"),
AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
{ /* sentinel */ },
};
static void __init at91sam9_common_init(void)
{
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(at91sam9_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91sam9_idle;
}
static void __init at91sam9_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9260_pm_init();
}
@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9_dt_device_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
static void __init at91sam9g45_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9g45_pm_init();
}
@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = {
DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9g45_dt_device_init,
.dt_compat = at91sam9g45_board_compat,
MACHINE_END
static void __init at91sam9x5_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9x5_pm_init();
}
@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = {
DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9x5_dt_device_init,
.dt_compat = at91sam9x5_board_compat,
MACHINE_END

7
arch/arm/mach-at91/generic.h
View File

@ -18,17 +18,10 @@
extern void __init at91_map_io(void);
extern void __init at91_alt_map_io(void);
/* Timer */
extern void at91rm9200_timer_init(void);
/* idle */
extern void at91rm9200_idle(void);
extern void at91sam9_idle(void);
/* Matrix */
extern void at91_ioremap_matrix(u32 base_addr);
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);

23
arch/arm/mach-at91/include/mach/at91_matrix.h
View File

@ -1,23 +0,0 @@
/*
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#ifndef __MACH_AT91_MATRIX_H__
#define __MACH_AT91_MATRIX_H__
#ifndef __ASSEMBLY__
extern void __iomem *at91_matrix_base;
#define at91_matrix_read(field) \
__raw_readl(at91_matrix_base + field)
#define at91_matrix_write(field, value) \
__raw_writel(value, at91_matrix_base + field)
#else
.extern at91_matrix_base
#endif
#endif /* __MACH_AT91_MATRIX_H__ */

61
arch/arm/mach-at91/include/mach/at91_st.h
View File

@ -1,61 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91_st.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* System Timer (ST) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_ST_H
#define AT91_ST_H
#ifndef __ASSEMBLY__
extern void __iomem *at91_st_base;
#define at91_st_read(field) \
__raw_readl(at91_st_base + field)
#define at91_st_write(field, value) \
__raw_writel(value, at91_st_base + field)
#else
.extern at91_st_base
#endif
#define AT91_ST_CR 0x00 /* Control Register */
#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */
#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */
#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */
#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
#define AT91_ST_SR 0x10 /* Status Register */
#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
#define AT91_ST_IER 0x14 /* Interrupt Enable Register */
#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */
#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */
#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */
#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
#define AT91_ST_CRTR 0x24 /* Current Real-time Register */
#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
#endif

80
arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
View File

@ -1,80 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
*
* Copyright (C) 2007 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9260_MATRIX_H
#define AT91SAM9260_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif

64
arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
View File

@ -1,64 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
*
* Copyright (C) 2007 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9261_MATRIX_H
#define AT91SAM9261_MATRIX_H
#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_ITCM_64 (7 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */
#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
#endif

129
arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
View File

@ -1,129 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
*
* Copyright (C) 2006 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9263 datasheet revision B (Preliminary).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9263_MATRIX_H
#define AT91SAM9263_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */
#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
#endif

153
arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
View File

@ -1,153 +0,0 @@
/*
* Matrix-centric header file for the AT91SAM9G45 family
*
* Copyright (C) 2008-2009 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9G45 preliminary datasheet.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9G45_MATRIX_H
#define AT91SAM9G45_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */
#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */
#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
#define AT91_MATRIX_ULBT_128 (7 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_RCB9 (1 << 9)
#define AT91_MATRIX_RCB10 (1 << 10)
#define AT91_MATRIX_RCB11 (1 << 11)
#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */
#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
#define AT91C_VDEC_SEL_OFF (0 << 0)
#define AT91C_VDEC_SEL_ON (1 << 0)
#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif

53
arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
View File

@ -1,53 +0,0 @@
/*
* Matrix-centric header file for the AT91SAM9N12
*
* Copyright (C) 2012 Atmel Corporation.
*
* Only EBI related registers.
* Write Protect register definitions may be useful.
*
* Licensed under GPLv2 or later.
*/
#ifndef _AT91SAM9N12_MATRIX_H_
#define _AT91SAM9N12_MATRIX_H_
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
#define AT91_MATRIX_MP_OFF (0 << 25)
#define AT91_MATRIX_MP_ON (1 << 25)
#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif

96
arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
View File

@ -1,96 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
*
* Copyright (C) 2007 Atmel Corporation
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9RL datasheet revision A. (Preliminary)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif

53
arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
View File

@ -1,53 +0,0 @@
/*
* Matrix-centric header file for the AT91SAM9x5 family
*
* Copyright (C) 2009-2012 Atmel Corporation.
*
* Only EBI related registers.
* Write Protect register definitions may be useful.
*
* Licensed under GPLv2 or later.
*/
#ifndef AT91SAM9X5_MATRIX_H
#define AT91SAM9X5_MATRIX_H
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
#define AT91_MATRIX_MP_OFF (0 << 25)
#define AT91_MATRIX_MP_ON (1 << 25)
#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif

27
arch/arm/mach-at91/include/mach/io.h
View File

@ -1,27 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/io.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) __typesafe_io(a)
#endif

163
arch/arm/mach-at91/pm.c
View File

@ -29,6 +29,8 @@
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
@ -41,7 +43,6 @@ static struct {
int memctrl;
} at91_pm_data;
static void (*at91_pm_standby)(void);
void __iomem *at91_ramc_base[2];
static int at91_pm_valid_state(suspend_state_t state)
@ -119,76 +120,67 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
#ifdef CONFIG_AT91_SLOW_CLOCK
extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
extern u32 at91_slow_clock_sz;
#endif
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
unsigned int pm_data = at91_pm_data.memctrl;
pm_data |= (state == PM_SUSPEND_MEM) ?
AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
flush_cache_all();
outer_disable();
at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
at91_ramc_base[1], pm_data);
outer_resume();
}
static int at91_pm_enter(suspend_state_t state)
{
at91_pinctrl_gpio_suspend();
switch (state) {
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
* drivers must suspend more deeply, the master clock switches
* to the clk32k and turns off the main oscillator
*/
case PM_SUSPEND_MEM:
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
* drivers must suspend more deeply: only the master clock
* controller may be using the main oscillator.
* Ensure that clocks are in a valid state.
*/
case PM_SUSPEND_MEM:
/*
* Ensure that clocks are in a valid state.
*/
if (!at91_pm_verify_clocks())
goto error;
/*
* Enter slow clock mode by switching over to clk32k and
* turning off the main oscillator; reverse on wakeup.
*/
if (slow_clock) {
#ifdef CONFIG_AT91_SLOW_CLOCK
/* copy slow_clock handler to SRAM, and call it */
memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
#endif
slow_clock(at91_pmc_base, at91_ramc_base[0],
at91_ramc_base[1],
at91_pm_data.memctrl);
break;
} else {
pr_info("AT91: PM - no slow clock mode enabled ...\n");
/* FALLTHROUGH leaving master clock alone */
}
/*
* STANDBY mode has *all* drivers suspended; ignores irqs not
* marked as 'wakeup' event sources; and reduces DRAM power.
* But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
* nothing fancy done with main or cpu clocks.
*/
case PM_SUSPEND_STANDBY:
/*
* NOTE: the Wait-for-Interrupt instruction needs to be
* in icache so no SDRAM accesses are needed until the
* wakeup IRQ occurs and self-refresh is terminated.
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
if (at91_pm_standby)
at91_pm_standby();
break;
case PM_SUSPEND_ON:
cpu_do_idle();
break;
default:
pr_debug("AT91: PM - bogus suspend state %d\n", state);
if (!at91_pm_verify_clocks())
goto error;
at91_pm_suspend(state);
break;
/*
* STANDBY mode has *all* drivers suspended; ignores irqs not
* marked as 'wakeup' event sources; and reduces DRAM power.
* But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
* nothing fancy done with main or cpu clocks.
*/
case PM_SUSPEND_STANDBY:
at91_pm_suspend(state);
break;
case PM_SUSPEND_ON:
cpu_do_idle();
break;
default:
pr_debug("AT91: PM - bogus suspend state %d\n", state);
goto error;
}
error:
@ -218,12 +210,10 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
void at91_pm_set_standby(void (*at91_standby)(void))
static void at91_pm_set_standby(void (*at91_standby)(void))
{
if (at91_standby) {
if (at91_standby)
at91_cpuidle_device.dev.platform_data = at91_standby;
at91_pm_standby = at91_standby;
}
}
static const struct of_device_id ramc_ids[] __initconst = {
@ -263,60 +253,63 @@ static __init void at91_dt_ramc(void)
at91_pm_set_standby(standby);
}
#ifdef CONFIG_AT91_SLOW_CLOCK
static void __init at91_pm_sram_init(void)
{
struct gen_pool *sram_pool;
phys_addr_t sram_pbase;
unsigned long sram_base;
struct device_node *node;
struct platform_device *pdev;
struct platform_device *pdev = NULL;
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find sram node!\n", __func__);
return;
for_each_compatible_node(node, NULL, "mmio-sram") {
pdev = of_find_device_by_node(node);
if (pdev) {
of_node_put(node);
break;
}
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find sram device!\n", __func__);
goto put_node;
return;
}
sram_pool = dev_get_gen_pool(&pdev->dev);
if (!sram_pool) {
pr_warn("%s: sram pool unavailable!\n", __func__);
goto put_node;
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
goto put_node;
pr_warn("%s: unable to alloc sram!\n", __func__);
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
at91_pm_suspend_in_sram_sz, false);
if (!at91_suspend_sram_fn) {
pr_warn("SRAM: Could not map\n");
return;
}
put_node:
of_node_put(node);
/* Copy the pm suspend handler to SRAM */
at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
#endif
static void __init at91_pm_init(void)
{
#ifdef CONFIG_AT91_SLOW_CLOCK
at91_pm_sram_init();
#endif
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
suspend_set_ops(&at91_pm_ops);
if (at91_suspend_sram_fn)
suspend_set_ops(&at91_pm_ops);
else
pr_info("AT91: PM not supported, due to no SRAM allocated\n");
}
void __init at91rm9200_pm_init(void)

16
arch/arm/mach-at91/pm.h
View File

@ -15,11 +15,13 @@
#include <mach/at91_ramc.h>
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
#else
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
#endif
#define AT91_PM_MEMTYPE_MASK 0x0f
#define AT91_PM_MODE_OFFSET 4
#define AT91_PM_MODE_MASK 0x01
#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
#define AT91_PM_SLOW_CLOCK 0x01
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
@ -31,6 +33,7 @@ static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
* still in self-refresh is "not recommended", but seems to work.
*/
#ifndef __ASSEMBLY__
static inline void at91rm9200_standby(void)
{
u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
@ -44,7 +47,7 @@ static inline void at91rm9200_standby(void)
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
"r" (1), "r" (AT91RM9200_SDRAMC_SRR),
"r" (lpr));
}
@ -112,3 +115,4 @@ static inline void at91sam9_sdram_standby(void)
}
#endif
#endif

323
arch/arm/mach-at91/pm_slowclock.S
View File

@ -1,323 +0,0 @@
/*
* arch/arm/mach-at91/pm_slow_clock.S
*
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
/*
* When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
* clock during suspend by adjusting its prescalar and divisor.
* NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
* are errata regarding adjusting the prescalar and divisor.
*/
#undef SLOWDOWN_MASTER_CLOCK
#define MCKRDY_TIMEOUT 1000
#define MOSCRDY_TIMEOUT 1000
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
pmc .req r0
sdramc .req r1
ramc1 .req r2
memctrl .req r3
tmp1 .req r4
tmp2 .req r5
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
mov tmp2, #MCKRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
mov tmp2, #MOSCRDY_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
mov tmp2, #PLLALOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
mov tmp2, #PLLBLOCK_TIMEOUT
1: sub tmp2, tmp2, #1
cmp tmp2, #0
beq 2f
ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
*/
ENTRY(at91_slow_clock)
/* Save registers on stack */
stmfd sp!, {r4 - r12, lr}
/*
* Register usage:
* R0 = Base address of AT91_PMC
* R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* R2 = Base address of second RAM Controller or 0 if not present
* R3 = Memory controller
* R4 = temporary register
* R5 = temporary register
*/
/* Drain write buffer */
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
cmp memctrl, #AT91_MEMCTRL_MC
bne ddr_sr_enable
/*
* at91rm9200 Memory controller
*/
/* Put SDRAM in self-refresh mode */
mov tmp1, #1
str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
b sdr_sr_done
/*
* DDRSDR Memory controller
*/
ddr_sr_enable:
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_sr_enable
/* prepare for DDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
str tmp1, .saved_sam9_lpr
bic tmp1, #AT91_DDRSDRC_LPCB
orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* figure out if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
strne tmp2, .saved_sam9_lpr1
bicne tmp2, #AT91_DDRSDRC_LPCB
orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b sdr_sr_done
/*
* SDRAMC Memory controller
*/
sdr_sr_enable:
/* Enable SDRAM self-refresh mode */
ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
str tmp1, .saved_sam9_lpr
bic tmp1, #AT91_SDRAMC_LPCB
orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
str tmp1, [sdramc, #AT91_SDRAMC_LPR]
sdr_sr_done:
/* Save Master clock setting */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#ifdef SLOWDOWN_MASTER_CLOCK
/*
* Set the Master Clock PRES and MDIV fields.
*
* See AT91RM9200 errata #27 and #28 for details.
*/
mov tmp1, #0
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#endif
/* Save PLLA setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
str tmp1, .saved_pllar
mov tmp1, #AT91_PMC_PLLCOUNT
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
str tmp1, [pmc, #AT91_CKGR_PLLAR]
/* Save PLLB setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
str tmp1, .saved_pllbr
mov tmp1, #AT91_PMC_PLLCOUNT
str tmp1, [pmc, #AT91_CKGR_PLLBR]
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
mcr p15, 0, tmp1, c7, c0, 4
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
/* Restore PLLB setting */
ldr tmp1, .saved_pllbr
str tmp1, [pmc, #AT91_CKGR_PLLBR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 1f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1:
wait_pllblock
2:
/* Restore PLLA setting */
ldr tmp1, .saved_pllar
str tmp1, [pmc, #AT91_CKGR_PLLAR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
#ifdef SLOWDOWN_MASTER_CLOCK
/*
* First set PRES if it was not 0,
* than set CSS and MDIV fields.
*
* See AT91RM9200 errata #27 and #28 for details.
*/
ldr tmp1, .saved_mckr
tst tmp1, #AT91_PMC_PRES
beq 2f
and tmp1, tmp1, #AT91_PMC_PRES
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#endif
/*
* Restore master clock setting
*/
2: ldr tmp1, .saved_mckr
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
/*
* at91rm9200 Memory controller
* Do nothing - self-refresh is automatically disabled.
*/
cmp memctrl, #AT91_MEMCTRL_MC
beq ram_restored
/*
* DDRSDR Memory controller
*/
cmp memctrl, #AT91_MEMCTRL_DDRSDR
bne sdr_en_restore
/* Restore LPR on AT91 with DDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
cmp ramc1, #0
ldrne tmp2, .saved_sam9_lpr1
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
b ram_restored
/*
* SDRAMC Memory controller
*/
sdr_en_restore:
/* Restore LPR on AT91 with SDRAM */
ldr tmp1, .saved_sam9_lpr
str tmp1, [sdramc, #AT91_SDRAMC_LPR]
ram_restored:
/* Restore registers, and return */
ldmfd sp!, {r4 - r12, pc}
.saved_mckr:
.word 0
.saved_pllar:
.word 0
.saved_pllbr:
.word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
.word 0
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock

338
arch/arm/mach-at91/pm_suspend.S 100644
View File

@ -0,0 +1,338 @@
/*
* arch/arm/mach-at91/pm_slow_clock.S
*
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
#include "pm.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
pmc .req r0
tmp1 .req r4
tmp2 .req r5
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MCKRDY
beq 1b
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_MOSCS
beq 1b
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
1: ldr tmp1, [pmc, #AT91_PMC_SR]
tst tmp1, #AT91_PMC_LOCKA
beq 1b
.endm
/*
* Put the processor to enter the idle state
*/
.macro at91_cpu_idle
#if defined(CONFIG_CPU_V7)
mov tmp1, #AT91_PMC_PCK
str tmp1, [pmc, #AT91_PMC_SCDR]
dsb
wfi @ Wait For Interrupt
#else
mcr p15, 0, tmp1, c7, c0, 4
#endif
.endm
.text
.arm
/*
* void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
* @input param:
* @r0: base address of AT91_PMC
* @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* @r2: base address of second SDRAM Controller or 0 if not present
* @r3: pm information
*/
ENTRY(at91_pm_suspend_in_sram)
/* Save registers on stack */
stmfd sp!, {r4 - r12, lr}
/* Drain write buffer */
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
str r0, .pmc_base
str r1, .sramc_base
str r2, .sramc1_base
and r0, r3, #AT91_PM_MEMTYPE_MASK
str r0, .memtype
lsr r0, r3, #AT91_PM_MODE_OFFSET
and r0, r0, #AT91_PM_MODE_MASK
str r0, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
bl at91_sramc_self_refresh
ldr r0, .pm_mode
tst r0, #AT91_PM_SLOW_CLOCK
beq skip_disable_main_clock
ldr pmc, .pmc_base
/* Save Master clock setting */
ldr tmp1, [pmc, #AT91_PMC_MCKR]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
/* Save PLLA setting and disable it */
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
str tmp1, .saved_pllar
mov tmp1, #AT91_PMC_PLLCOUNT
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
str tmp1, [pmc, #AT91_CKGR_PLLAR]
/* Turn off the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
skip_disable_main_clock:
ldr pmc, .pmc_base
/* Wait for interrupt */
at91_cpu_idle
ldr r0, .pm_mode
tst r0, #AT91_PM_SLOW_CLOCK
beq skip_enable_main_clock
ldr pmc, .pmc_base
/* Turn on the main oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
/* Restore PLLA setting */
ldr tmp1, .saved_pllar
str tmp1, [pmc, #AT91_CKGR_PLLAR]
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
/*
* Restore master clock setting
*/
ldr tmp1, .saved_mckr
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
skip_enable_main_clock:
/* Exit the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_EXIT
bl at91_sramc_self_refresh
/* Restore registers, and return */
ldmfd sp!, {r4 - r12, pc}
ENDPROC(at91_pm_suspend_in_sram)
/*
* void at91_sramc_self_refresh(unsigned int is_active)
*
* @input param:
* @r0: 1 - active self-refresh mode
* 0 - exit self-refresh mode
* register usage:
* @r1: memory type
* @r2: base address of the sram controller
*/
ENTRY(at91_sramc_self_refresh)
ldr r1, .memtype
ldr r2, .sramc_base
cmp r1, #AT91_MEMCTRL_MC
bne ddrc_sf
/*
* at91rm9200 Memory controller
*/
/*
* For exiting the self-refresh mode, do nothing,
* automatically exit the self-refresh mode.
*/
tst r0, #SRAMC_SELF_FRESH_ACTIVE
beq exit_sramc_sf
/* Active SDRAM self-refresh mode */
mov r3, #1
str r3, [r2, #AT91RM9200_SDRAMC_SRR]
b exit_sramc_sf
ddrc_sf:
cmp r1, #AT91_MEMCTRL_DDRSDR
bne sdramc_sf
/*
* DDR Memory controller
*/
tst r0, #SRAMC_SELF_FRESH_ACTIVE
beq ddrc_exit_sf
/* LPDDR1 --> force DDR2 mode during self-refresh */
ldr r3, [r2, #AT91_DDRSDRC_MDR]
str r3, .saved_sam9_mdr
bic r3, r3, #~AT91_DDRSDRC_MD
cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq r3, [r2, #AT91_DDRSDRC_MDR]
biceq r3, r3, #AT91_DDRSDRC_MD
orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
streq r3, [r2, #AT91_DDRSDRC_MDR]
/* Active DDRC self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR]
str r3, .saved_sam9_lpr
bic r3, r3, #AT91_DDRSDRC_LPCB
orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_DDRSDRC_LPR]
/* If using the 2nd ddr controller */
ldr r2, .sramc1_base
cmp r2, #0
beq no_2nd_ddrc
ldr r3, [r2, #AT91_DDRSDRC_MDR]
str r3, .saved_sam9_mdr1
bic r3, r3, #~AT91_DDRSDRC_MD
cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
ldreq r3, [r2, #AT91_DDRSDRC_MDR]
biceq r3, r3, #AT91_DDRSDRC_MD
orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
streq r3, [r2, #AT91_DDRSDRC_MDR]
/* Active DDRC self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR]
str r3, .saved_sam9_lpr1
bic r3, r3, #AT91_DDRSDRC_LPCB
orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_DDRSDRC_LPR]
no_2nd_ddrc:
b exit_sramc_sf
ddrc_exit_sf:
/* Restore MDR in case of LPDDR1 */
ldr r3, .saved_sam9_mdr
str r3, [r2, #AT91_DDRSDRC_MDR]
/* Restore LPR on AT91 with DDRAM */
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_DDRSDRC_LPR]
/* If using the 2nd ddr controller */
ldr r2, .sramc1_base
cmp r2, #0
ldrne r3, .saved_sam9_mdr1
strne r3, [r2, #AT91_DDRSDRC_MDR]
ldrne r3, .saved_sam9_lpr1
strne r3, [r2, #AT91_DDRSDRC_LPR]
b exit_sramc_sf
/*
* SDRAMC Memory controller
*/
sdramc_sf:
tst r0, #SRAMC_SELF_FRESH_ACTIVE
beq sdramc_exit_sf
/* Active SDRAMC self-refresh mode */
ldr r3, [r2, #AT91_SDRAMC_LPR]
str r3, .saved_sam9_lpr
bic r3, r3, #AT91_SDRAMC_LPCB
orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_SDRAMC_LPR]
sdramc_exit_sf:
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_SDRAMC_LPR]
exit_sramc_sf:
mov pc, lr
ENDPROC(at91_sramc_self_refresh)
.pmc_base:
.word 0
.sramc_base:
.word 0
.sramc1_base:
.word 0
.memtype:
.word 0
.pm_mode:
.word 0
.saved_mckr:
.word 0
.saved_pllar:
.word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
.word 0
.saved_sam9_mdr:
.word 0
.saved_sam9_mdr1:
.word 0
ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram

99
arch/arm/mach-at91/sama5.c
View File

@ -7,48 +7,50 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/micrel_phy.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
#include <linux/phy.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "generic.h"
#include "soc.h"
static int ksz8081_phy_fixup(struct phy_device *phy)
{
int value;
value = phy_read(phy, 0x16);
value &= ~0x20;
phy_write(phy, 0x16, value);
return 0;
}
static const struct at91_soc sama5_socs[] = {
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
"sama5d31", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
"sama5d33", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
"sama5d34", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
"sama5d35", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
"sama5d36", "sama5d3"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
"sama5d41", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
"sama5d42", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
"sama5d43", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
"sama5d44", "sama5d4"),
{ /* sentinel */ },
};
static void __init sama5_dt_device_init(void)
{
if (of_machine_is_compatible("atmel,sama5d4ek") &&
IS_ENABLED(CONFIG_PHYLIB)) {
phy_register_fixup_for_id("fc028000.etherne:00",
ksz8081_phy_fixup);
}
struct soc_device *soc;
struct device *soc_dev = NULL;
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
soc = at91_soc_init(sama5_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
at91sam9x5_pm_init();
}
@ -59,44 +61,10 @@ static const char *sama5_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
static struct map_desc at91_io_desc[] __initdata = {
{
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
.pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
.length = SZ_512,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
.pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
.length = SZ_512,
.type = MT_DEVICE,
},
{ /* On sama5d4, we use USART3 as serial console */
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
.pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
.length = SZ_256,
.type = MT_DEVICE,
},
{ /* A bunch of peripheral with fine grained IO space */
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
.pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
.length = SZ_2K,
.type = MT_DEVICE,
},
};
static void __init sama5_alt_map_io(void)
{
at91_alt_map_io();
iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
}
static const char *sama5_alt_dt_board_compat[] __initconst = {
"atmel,sama5d4",
NULL
@ -104,7 +72,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
.map_io = sama5_alt_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_alt_dt_board_compat,
.l2c_aux_mask = ~0UL,

330
arch/arm/mach-at91/setup.c
View File

@ -1,330 +0,0 @@
/*
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#define pr_fmt(fmt) "AT91: " fmt
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include "generic.h"
#include "pm.h"
struct at91_socinfo at91_soc_initdata;
EXPORT_SYMBOL(at91_soc_initdata);
static struct map_desc at91_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
};
static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_ALT_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_ALT_BASE_SYS),
.length = 24 * SZ_1K,
.type = MT_DEVICE,
};
static void __init soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9G45:
at91_soc_initdata.type = AT91_SOC_SAM9G45;
if (cidr == ARCH_ID_AT91SAM9G45ES)
at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
break;
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9X5:
at91_soc_initdata.type = AT91_SOC_SAM9X5;
break;
case ARCH_ID_AT91SAM9N12:
at91_soc_initdata.type = AT91_SOC_SAM9N12;
break;
case ARCH_ID_SAMA5:
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
}
break;
}
/* at91sam9g10 */
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
}
/* at91sam9xe */
else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
if (!at91_soc_initdata.exid)
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9M10:
at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
break;
case ARCH_EXID_AT91SAM9G46:
at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
break;
case ARCH_EXID_AT91SAM9M11:
at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9G15:
at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
break;
case ARCH_EXID_AT91SAM9G35:
at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
break;
case ARCH_EXID_AT91SAM9X35:
at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
break;
case ARCH_EXID_AT91SAM9G25:
at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
break;
case ARCH_EXID_AT91SAM9X25:
at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D31:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
break;
case ARCH_EXID_SAMA5D33:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
break;
case ARCH_EXID_SAMA5D34:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
break;
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
case ARCH_EXID_SAMA5D36:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
break;
}
}
}
static void __init alt_soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
/* SoC ID */
cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_SAMA5:
at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
at91_soc_initdata.type = AT91_SOC_SAMA5D4;
}
break;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
if (!at91_soc_initdata.exid)
at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D41:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
break;
case ARCH_EXID_SAMA5D42:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
break;
case ARCH_EXID_SAMA5D43:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
break;
case ARCH_EXID_SAMA5D44:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
break;
}
}
}
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
[AT91_SOC_SAM9G10] = "at91sam9g10",
[AT91_SOC_SAM9G20] = "at91sam9g20",
[AT91_SOC_SAM9G45] = "at91sam9g45",
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_SAMA5D4] = "sama5d4",
[AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
{
return soc_name[c->type];
}
EXPORT_SYMBOL(at91_get_soc_type);
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
[AT91_SOC_SAM9G46] = "at91sam9g46",
[AT91_SOC_SAM9M11] = "at91sam9m11",
[AT91_SOC_SAM9G15] = "at91sam9g15",
[AT91_SOC_SAM9G35] = "at91sam9g35",
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SAMA5D31] = "sama5d31",
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SAMA5D36] = "sama5d36",
[AT91_SOC_SAMA5D41] = "sama5d41",
[AT91_SOC_SAMA5D42] = "sama5d42",
[AT91_SOC_SAMA5D43] = "sama5d43",
[AT91_SOC_SAMA5D44] = "sama5d44",
[AT91_SOC_SUBTYPE_NONE] = "None",
[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
{
return soc_subtype_name[c->subtype];
}
EXPORT_SYMBOL(at91_get_soc_subtype);
void __init at91_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
soc_detect(AT91_BASE_DBGU1);
if (!at91_soc_is_detected())
panic(pr_fmt("Impossible to detect the SOC type"));
pr_info("Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __init at91_alt_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_alt_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
alt_soc_detect(AT91_BASE_DBGU2);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{
at91_matrix_base = ioremap(base_addr, 512);
if (!at91_matrix_base)
panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
}

97
arch/arm/mach-at91/soc.c 100644
View File

@ -0,0 +1,97 @@
/*
* Copyright (C) 2015 Atmel
*
* Alexandre Belloni <alexandre.belloni@free-electrons.com
* Boris Brezillon <boris.brezillon@free-electrons.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#define pr_fmt(fmt) "AT91: " fmt
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include "soc.h"
#define AT91_DBGU_CIDR 0x40
#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f)
#define AT91_DBGU_CIDR_EXT BIT(31)
#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0
#define AT91_DBGU_EXID 0x44
struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
{
struct soc_device_attribute *soc_dev_attr;
const struct at91_soc *soc;
struct soc_device *soc_dev;
struct device_node *np;
void __iomem *regs;
u32 cidr, exid;
np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
if (!np)
np = of_find_compatible_node(NULL, NULL,
"atmel,at91sam9260-dbgu");
if (!np) {
pr_warn("Could not find DBGU node");
return NULL;
}
regs = of_iomap(np, 0);
of_node_put(np);
if (!regs) {
pr_warn("Could not map DBGU iomem range");
return NULL;
}
cidr = readl(regs + AT91_DBGU_CIDR);
exid = readl(regs + AT91_DBGU_EXID);
iounmap(regs);
for (soc = socs; soc->name; soc++) {
if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
continue;
if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
break;
}
if (!soc->name) {
pr_warn("Could not find matching SoC description\n");
return NULL;
}
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return NULL;
soc_dev_attr->family = soc->family;
soc_dev_attr->soc_id = soc->name;
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
AT91_DBGU_CIDR_VERSION(cidr));
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
pr_warn("Could not register SoC device\n");
return NULL;
}
if (soc->family)
pr_info("Detected SoC family: %s\n", soc->family);
pr_info("Detected SoC: %s, revision %X\n", soc->name,
AT91_DBGU_CIDR_VERSION(cidr));
return soc_dev;
}

78
arch/arm/mach-at91/soc.h 100644
View File

@ -0,0 +1,78 @@
/*
* Copyright (C) 2015 Atmel
*
* Boris Brezillon <boris.brezillon@free-electrons.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#ifndef __AT91_SOC_H
#define __AT91_SOC_H
#include <linux/sys_soc.h>
struct at91_soc {
u32 cidr_match;
u32 exid_match;
const char *name;
const char *family;
};
#define AT91_SOC(__cidr, __exid, __name, __family) \
{ \
.cidr_match = (__cidr), \
.exid_match = (__exid), \
.name = (__name), \
.family = (__family), \
}
struct soc_device * __init
at91_soc_init(const struct at91_soc *socs);
#define AT91RM9200_CIDR_MATCH 0x09290780
#define AT91SAM9260_CIDR_MATCH 0x019803a0
#define AT91SAM9261_CIDR_MATCH 0x019703a0
#define AT91SAM9263_CIDR_MATCH 0x019607a0
#define AT91SAM9G20_CIDR_MATCH 0x019905a0
#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0
#define AT91SAM9G45_CIDR_MATCH 0x019b05a0
#define AT91SAM9X5_CIDR_MATCH 0x019a05a0
#define AT91SAM9N12_CIDR_MATCH 0x019a07a0
#define AT91SAM9M11_EXID_MATCH 0x00000001
#define AT91SAM9M10_EXID_MATCH 0x00000002
#define AT91SAM9G46_EXID_MATCH 0x00000003
#define AT91SAM9G45_EXID_MATCH 0x00000004
#define AT91SAM9G15_EXID_MATCH 0x00000000
#define AT91SAM9G35_EXID_MATCH 0x00000001
#define AT91SAM9X35_EXID_MATCH 0x00000002
#define AT91SAM9G25_EXID_MATCH 0x00000003
#define AT91SAM9X25_EXID_MATCH 0x00000004
#define AT91SAM9CN12_EXID_MATCH 0x00000005
#define AT91SAM9N12_EXID_MATCH 0x00000006
#define AT91SAM9CN11_EXID_MATCH 0x00000009
#define AT91SAM9XE128_CIDR_MATCH 0x329973a0
#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
#define SAMA5D3_CIDR_MATCH 0x0a5c07c0
#define SAMA5D31_EXID_MATCH 0x00444300
#define SAMA5D33_EXID_MATCH 0x00414300
#define SAMA5D34_EXID_MATCH 0x00414301
#define SAMA5D35_EXID_MATCH 0x00584300
#define SAMA5D36_EXID_MATCH 0x00004301
#define SAMA5D4_CIDR_MATCH 0x0a5c07c0
#define SAMA5D41_EXID_MATCH 0x00000001
#define SAMA5D42_EXID_MATCH 0x00000002
#define SAMA5D43_EXID_MATCH 0x00000003
#define SAMA5D44_EXID_MATCH 0x00000004
#endif /* __AT91_SOC_H */

4
drivers/clocksource/Kconfig
View File

@ -143,6 +143,10 @@ config ATMEL_PIT
select CLKSRC_OF if OF
def_bool SOC_AT91SAM9 || SOC_SAMA5
config ATMEL_ST
bool
select CLKSRC_OF
config CLKSRC_METAG_GENERIC
def_bool y if METAG
help

1
drivers/clocksource/Makefile
View File

@ -1,5 +1,6 @@
obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o
obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o

117
arch/arm/mach-at91/at91rm9200_time.c → drivers/clocksource/timer-atmel-st.c
View File

@ -24,19 +24,17 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/atmel-st.h>
#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <mach/at91_st.h>
#include <mach/hardware.h>
#include <linux/regmap.h>
static unsigned long last_crtr;
static u32 irqmask;
static struct clock_event_device clkevt;
static struct regmap *regmap_st;
#define AT91_SLOW_CLOCK 32768
#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
/*
@ -46,11 +44,11 @@ static struct clock_event_device clkevt;
*/
static inline unsigned long read_CRTR(void)
{
unsigned long x1, x2;
unsigned int x1, x2;
x1 = at91_st_read(AT91_ST_CRTR);
regmap_read(regmap_st, AT91_ST_CRTR, &x1);
do {
x2 = at91_st_read(AT91_ST_CRTR);
regmap_read(regmap_st, AT91_ST_CRTR, &x2);
if (x1 == x2)
break;
x1 = x2;
@ -63,7 +61,10 @@ static inline unsigned long read_CRTR(void)
*/
static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
{
u32 sr = at91_st_read(AT91_ST_SR) & irqmask;
u32 sr;
regmap_read(regmap_st, AT91_ST_SR, &sr);
sr &= irqmask;
/*
* irqs should be disabled here, but as the irq is shared they are only
@ -92,13 +93,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
return IRQ_NONE;
}
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91rm9200_timer_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
@ -115,23 +109,25 @@ static struct clocksource clk32k = {
static void
clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
{
unsigned int val;
/* Disable and flush pending timer interrupts */
at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
at91_st_read(AT91_ST_SR);
regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
regmap_read(regmap_st, AT91_ST_SR, &val);
last_crtr = read_CRTR();
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* ALM for oneshot irqs, set by next_event()
* before 32 seconds have passed
*/
irqmask = AT91_ST_ALMS;
at91_st_write(AT91_ST_RTAR, last_crtr);
regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
@ -139,7 +135,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
irqmask = 0;
break;
}
at91_st_write(AT91_ST_IER, irqmask);
regmap_write(regmap_st, AT91_ST_IER, irqmask);
}
static int
@ -147,6 +143,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
{
u32 alm;
int status = 0;
unsigned int val;
BUG_ON(delta < 2);
@ -162,12 +159,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
alm = read_CRTR();
/* Cancel any pending alarm; flush any pending IRQ */
at91_st_write(AT91_ST_RTAR, alm);
at91_st_read(AT91_ST_SR);
regmap_write(regmap_st, AT91_ST_RTAR, alm);
regmap_read(regmap_st, AT91_ST_SR, &val);
/* Schedule alarm by writing RTAR. */
alm += delta;
at91_st_write(AT91_ST_RTAR, alm);
regmap_write(regmap_st, AT91_ST_RTAR, alm);
return status;
}
@ -180,66 +177,40 @@ static struct clock_event_device clkevt = {
.set_mode = clkevt32k_mode,
};
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
static const struct of_device_id at91rm9200_st_timer_ids[] = {
{ .compatible = "atmel,at91rm9200-st" },
{ /* sentinel */ }
};
static int __init of_at91rm9200_st_init(void)
{
struct device_node *np;
int ret;
np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
if (!np)
goto err;
at91_st_base = of_iomap(np, 0);
if (!at91_st_base)
goto node_err;
/* Get the interrupts property */
ret = irq_of_parse_and_map(np, 0);
if (!ret)
goto ioremap_err;
at91rm9200_timer_irq.irq = ret;
of_node_put(np);
return 0;
ioremap_err:
iounmap(at91_st_base);
node_err:
of_node_put(np);
err:
return -EINVAL;
}
/*
* ST (system timer) module supports both clockevents and clocksource.
*/
void __init at91rm9200_timer_init(void)
static void __init atmel_st_timer_init(struct device_node *node)
{
/* For device tree enabled device: initialize here */
of_at91rm9200_st_init();
unsigned int val;
int irq, ret;
regmap_st = syscon_node_to_regmap(node);
if (IS_ERR(regmap_st))
panic(pr_fmt("Unable to get regmap\n"));
/* Disable all timer interrupts, and clear any pending ones */
at91_st_write(AT91_ST_IDR,
regmap_write(regmap_st, AT91_ST_IDR,
AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
at91_st_read(AT91_ST_SR);
regmap_read(regmap_st, AT91_ST_SR, &val);
/* Get the interrupts property */
irq = irq_of_parse_and_map(node, 0);
if (!irq)
panic(pr_fmt("Unable to get IRQ from DT\n"));
/* Make IRQs happen for the system timer */
setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
ret = request_irq(irq, at91rm9200_timer_interrupt,
IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
"at91_tick", regmap_st);
if (ret)
panic(pr_fmt("Unable to setup IRQ\n"));
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
* its prescaler from the 1 Hz default.
*/
at91_st_write(AT91_ST_RTMR, 1);
regmap_write(regmap_st, AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.cpumask = cpumask_of(0);
@ -249,3 +220,5 @@ void __init at91rm9200_timer_init(void)
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
}
CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
atmel_st_timer_init);

1
drivers/pcmcia/Kconfig
View File

@ -278,6 +278,7 @@ config BFIN_CFPCMCIA
config AT91_CF
tristate "AT91 CompactFlash Controller"
depends on PCI
depends on PCMCIA && ARCH_AT91
depends on !ARCH_MULTIPLATFORM
help

13
drivers/pcmcia/at91_cf.c
View File

@ -317,13 +317,14 @@ static int at91_cf_probe(struct platform_device *pdev)
} else
cf->socket.pci_irq = nr_irqs + 1;
/* pcmcia layer only remaps "real" memory not iospace */
cf->socket.io_offset = (unsigned long) devm_ioremap(&pdev->dev,
cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
if (!cf->socket.io_offset) {
status = -ENXIO;
/*
* pcmcia layer only remaps "real" memory not iospace
* io_offset is set to 0x10000 to avoid the check in static_find_io().
* */
cf->socket.io_offset = 0x10000;
status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS);
if (status)
goto fail0a;
}
/* reserve chip-select regions */
if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) {

2
drivers/watchdog/Kconfig
View File

@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
depends on SOC_AT91RM9200
depends on SOC_AT91RM9200 && MFD_SYSCON
help
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.

61
drivers/watchdog/at91rm9200_wdt.c
View File

@ -12,27 +12,32 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/atmel-st.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/uaccess.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <mach/at91_st.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_MAX_TIME 256 /* seconds */
static int wdt_time = WDT_DEFAULT_TIME;
static bool nowayout = WATCHDOG_NOWAYOUT;
static struct regmap *regmap_st;
module_param(wdt_time, int, 0);
MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@ -50,12 +55,33 @@ static unsigned long at91wdt_busy;
/* ......................................................................... */
static int at91rm9200_restart(struct notifier_block *this,
unsigned long mode, void *cmd)
{
/*
* Perform a hardware reset with the use of the Watchdog timer.
*/
regmap_write(regmap_st, AT91_ST_WDMR,
AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
mdelay(2000);
pr_emerg("Unable to restart system\n");
return NOTIFY_DONE;
}
static struct notifier_block at91rm9200_restart_nb = {
.notifier_call = at91rm9200_restart,
.priority = 192,
};
/*
* Disable the watchdog.
*/
static inline void at91_wdt_stop(void)
{
at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
}
/*
@ -63,9 +89,9 @@ static inline void at91_wdt_stop(void)
*/
static inline void at91_wdt_start(void)
{
at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
}
/*
@ -73,7 +99,7 @@ static inline void at91_wdt_start(void)
*/
static inline void at91_wdt_reload(void)
{
at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
}
/* ......................................................................... */
@ -203,16 +229,32 @@ static struct miscdevice at91wdt_miscdev = {
static int at91wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device *parent;
int res;
if (at91wdt_miscdev.parent)
return -EBUSY;
at91wdt_miscdev.parent = &pdev->dev;
parent = dev->parent;
if (!parent) {
dev_err(dev, "no parent\n");
return -ENODEV;
}
regmap_st = syscon_node_to_regmap(parent->of_node);
if (!regmap_st)
return -ENODEV;
res = misc_register(&at91wdt_miscdev);
if (res)
return res;
res = register_restart_handler(&at91rm9200_restart_nb);
if (res)
dev_warn(dev, "failed to register restart handler\n");
pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n",
wdt_time, nowayout ? ", nowayout" : "");
return 0;
@ -220,8 +262,13 @@ static int at91wdt_probe(struct platform_device *pdev)
static int at91wdt_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int res;
res = unregister_restart_handler(&at91rm9200_restart_nb);
if (res)
dev_warn(dev, "failed to unregister restart handler\n");
res = misc_deregister(&at91wdt_miscdev);
if (!res)
at91wdt_miscdev.parent = NULL;
@ -267,7 +314,7 @@ static struct platform_driver at91wdt_driver = {
.suspend = at91wdt_suspend,
.resume = at91wdt_resume,
.driver = {
.name = "at91_wdt",
.name = "atmel_st_watchdog",
.of_match_table = at91_wdt_dt_ids,
},
};
@ -296,4 +343,4 @@ module_exit(at91_wdt_exit);
MODULE_AUTHOR("Andrew Victor");
MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:at91_wdt");
MODULE_ALIAS("platform:atmel_st_watchdog");

49
include/linux/mfd/syscon/atmel-st.h 100644
View File

@ -0,0 +1,49 @@
/*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* System Timer (ST) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H
#define _LINUX_MFD_SYSCON_ATMEL_ST_H
#include <linux/bitops.h>
#define AT91_ST_CR 0x00 /* Control Register */
#define AT91_ST_WDRST BIT(0) /* Watchdog Timer Restart */
#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */
#define AT91_ST_PIV 0xffff /* Period Interval Value */
#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */
#define AT91_ST_WDV 0xffff /* Watchdog Counter Value */
#define AT91_ST_RSTEN BIT(16) /* Reset Enable */
#define AT91_ST_EXTEN BIT(17) /* External Signal Assertion Enable */
#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */
#define AT91_ST_RTPRES 0xffff /* Real-time Prescalar Value */
#define AT91_ST_SR 0x10 /* Status Register */
#define AT91_ST_PITS BIT(0) /* Period Interval Timer Status */
#define AT91_ST_WDOVF BIT(1) /* Watchdog Overflow */
#define AT91_ST_RTTINC BIT(2) /* Real-time Timer Increment */
#define AT91_ST_ALMS BIT(3) /* Alarm Status */
#define AT91_ST_IER 0x14 /* Interrupt Enable Register */
#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */
#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */
#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */
#define AT91_ST_ALMV 0xfffff /* Alarm Value */
#define AT91_ST_CRTR 0x24 /* Current Real-time Register */
#define AT91_ST_CRTV 0xfffff /* Current Real-Time Value */
#endif /* _LINUX_MFD_SYSCON_ATMEL_ST_H */

2
include/soc/at91/at91sam9_ddrsdr.h
View File

@ -92,7 +92,7 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD (7 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3