redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Cleanups on various subarchitectures 

Cleanup patches for various ARM platforms and some of their associated
 drivers, the bulk of these is for mach-91.
 
 I ended up pulling in the restart branch from Russell in order to
 fix up some simple but annoying merge conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtcbmCrR//JCVInAQLONg/+PnaGQ9gt+dRQD1kzvOl1uE4veBD4KJ3j
 k3ew36OpcbkjKbcZjkN42tXbM5nBAC5A9w+iKy0RZvvxO+iay8A3IdYhlnpJhMCY
 LLvv8bUltR3iB5BPJO8MXgUAkHbec/8yGZ+Zu9LfQOC8LvaXW4ARiy7RLuA01MAM
 EUyL0cSAS5iztlJ1j9qwaQ+k6kReLSVkG1MRcTjPwHu75zWA2ADdQmkfb1jo6v9o
 3NF4QX2aw2tpPWn7B443irVLiZFG01gBugktl2z4VcNEHLHaU7eJUddh9146FVFd
 WZPz6y4qJHXJkAsL2QdEHwCet2yphf32XXAGJVVOSsr5EEqfAawPLQCt8qPaN6Un
 M+BLVlf3Wtv6JmGC+ECYvHEKdu04Zw1ia43cG7VOCgpoZjdo2HgaHIjL2t96Zj7N
 OpESMNiSp8++G7Gw+TxovDG93nBT459A12i3xhf/ljz2X1ADDSc6S0h+Vfi17201
 XcLH9ctJn17TfO8+KBwSYM3W3V1I6APHoKRN41q4u+fHnxu93jLnMeGDqRyscxRq
 BWvH1XmbkLBEb0HPtN30rTkVEnOMx4ZozM6/htVrdSRLKO+ss7XCRXLbWZxx3mWb
 sCvc1E5A1GmPmhOE8P+DqFVZlZXsIVHPsnp/nLjzCZFsIv0x2RdGjd7wXK605z0Z
 d+u3fNUEiHA=
 =9q+1
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Cleanups on various subarchitectures

Cleanup patches for various ARM platforms and some of their associated
drivers, the bulk of these is for mach-91.

Arnd ended up pulling in the restart branch from Russell in order to
fix up some simple but annoying merge conflicts.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  arm/at91: fix build of stamp9g20
  ARM: u300: delete memory.h
  MAINTAINERS: add maintainer entry for Picochip picoxcell
  ARM: picoxcell: move io mappings to common.c
  ARM: picoxcell: don't reserve irq_descs
  ARM: picoxcell: remove mach/memory.h
  ARM: at91: delete the pcontrol_g20_defconfig
  arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC
  arm/tegra: remove unused defines
  arm/tegra: fix variable formatting in makefile
  ARM: davinci: vpif: move code to driver core header from platform
  ARM: at91/gpio: fix display of number of irq setuped
  ARM: at91/gpio: drop PIN_BASE
  ARM: at91/udc: use gpio_is_valid to check the gpio
  ARM: at91/ohci: use gpio_is_valid to check the gpio
  ARM: at91/nand: use gpio_is_valid to check the gpio
  ARM: at91/mmc: use gpio_is_valid to check the gpio
  ARM: at91/ide: use gpio_is_valid to check the gpio
  ARM: at91/pata: use gpio_is_valid to check the gpio
  ARM: at91/soc: use gpio_is_valid to check the gpio
  ...
hifive-unleashed-5.1
Linus Torvalds 2012-01-09 14:21:03 -08:00
parent 57e964e1ae 40ba95fdf1
commit acc952c1f3
136 changed files with 1641 additions and 1498 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
MAINTAINERS
View File

@ -5111,6 +5111,15 @@ L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/phram.c
PICOXCELL SUPPORT
M: Jamie Iles <jamie@jamieiles.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/jamieiles/linux-2.6-ji.git
S: Supported
F: arch/arm/mach-picoxcell
F: drivers/*/picoxcell*
F: drivers/*/*/picoxcell*
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained

2
arch/arm/Kconfig
View File

@ -658,6 +658,7 @@ config ARCH_PICOXCELL
select HAVE_SCHED_CLOCK
select HAVE_TCM
select NO_IOPORT
select SPARSE_IRQ
select USE_OF
help
This enables support for systems based on the Picochip picoXcell
@ -892,7 +893,6 @@ config ARCH_U300
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.

45
arch/arm/Kconfig.debug
View File

@ -100,6 +100,14 @@ choice
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
bool "Kernel low-level debugging on 9263, 9g45 and cap9"
depends on HAVE_AT91_DBGU1
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
@ -247,6 +255,43 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
endchoice
config EARLY_PRINTK

175
arch/arm/configs/pcontrol_g20_defconfig
View File

@ -1,175 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="/opt/arm-2010q1/bin/arm-none-linux-gnueabi-"
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_DEFAULT_DEADLINE=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_PCONTROL_G20=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 mem=128M mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) root=/dev/mmcblk0p1 rootwait rw"
CONFIG_VFP=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_VLAN_8021Q=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHRAM=m
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_AT24=m
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MACVLAN=m
CONFIG_TUN=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
CONFIG_SMSC911X=m
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_MPPE=m
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_SERIO is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_MAX3100=m
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_R3964=m
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_GPIO=m
CONFIG_SPI=y
CONFIG_SPI_ATMEL=m
CONFIG_SPI_SPIDEV=m
CONFIG_GPIO_SYSFS=y
CONFIG_W1=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_MFD_SUPPORT is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=m
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_HID=m
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
CONFIG_UIO_PDRV=y
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_IIO=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y

24
arch/arm/mach-at91/Kconfig
View File

@ -3,6 +3,12 @@ if ARCH_AT91
config HAVE_AT91_DATAFLASH_CARD
bool
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
config HAVE_AT91_USART3
bool
@ -21,12 +27,14 @@ config ARCH_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_AT91_USART3
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
@ -37,11 +45,13 @@ config ARCH_AT91SAM9261
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
config ARCH_AT91SAM9263
@ -50,6 +60,7 @@ config ARCH_AT91SAM9263
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
@ -57,11 +68,13 @@ config ARCH_AT91SAM9RL
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
@ -74,6 +87,7 @@ config ARCH_AT91SAM9G45
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
config ARCH_AT91CAP9
bool "AT91CAP9"
@ -81,6 +95,7 @@ config ARCH_AT91CAP9
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
config ARCH_AT91X40
bool "AT91x40"
@ -510,8 +525,13 @@ config AT91_TIMER_HZ
choice
prompt "Select a UART for early kernel messages"
config AT91_EARLY_DBGU
bool "DBGU"
config AT91_EARLY_DBGU0
bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_EARLY_DBGU1
bool "DBGU on 9263, 9g45 and cap9"
depends on HAVE_AT91_DBGU1
config AT91_EARLY_USART0
bool "USART0"

40
arch/arm/mach-at91/at91cap9.c
View File

@ -13,7 +13,6 @@
*/
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@ -23,11 +22,11 @@
#include <mach/at91cap9.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@ -137,7 +136,7 @@ static struct clk pwm_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "macb_clk",
.name = "pclk",
.pmc_mask = 1 << AT91CAP9_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@ -210,6 +209,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for macb_hclk */
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@ -221,6 +222,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioABCD_clk),
CLKDEV_CON_ID("pioB", &pioABCD_clk),
CLKDEV_CON_ID("pioC", &pioABCD_clk),
CLKDEV_CON_ID("pioD", &pioABCD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -293,23 +298,19 @@ void __init at91cap9_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91cap9_gpio[] = {
static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
{
.id = AT91CAP9_ID_PIOABCD,
.offset = AT91_PIOA,
.clock = &pioABCD_clk,
.regbase = AT91CAP9_BASE_PIOA,
}, {
.id = AT91CAP9_ID_PIOABCD,
.offset = AT91_PIOB,
.clock = &pioABCD_clk,
.regbase = AT91CAP9_BASE_PIOB,
}, {
.id = AT91CAP9_ID_PIOABCD,
.offset = AT91_PIOC,
.clock = &pioABCD_clk,
.regbase = AT91CAP9_BASE_PIOC,
}, {
.id = AT91CAP9_ID_PIOABCD,
.offset = AT91_PIOD,
.clock = &pioABCD_clk,
.regbase = AT91CAP9_BASE_PIOD,
}
};
@ -318,12 +319,6 @@ static void at91cap9_restart(char mode, const char *cmd)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
static void at91cap9_poweroff(void)
{
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
/* --------------------------------------------------------------------
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
@ -333,10 +328,16 @@ static void __init at91cap9_map_io(void)
at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
}
static void __init at91cap9_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
}
static void __init at91cap9_initialize(void)
{
arm_pm_restart = at91cap9_restart;
pm_power_off = at91cap9_poweroff;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
/* Register GPIO subsystem */
@ -394,6 +395,7 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91cap9_soc = {
.map_io = at91cap9_map_io,
.default_irq_priority = at91cap9_default_irq_priority,
.ioremap_registers = at91cap9_ioremap_registers,
.register_clocks = at91cap9_register_clocks,
.init = at91cap9_initialize,
};

49
arch/arm/mach-at91/at91cap9_devices.c
View File

@ -76,7 +76,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (data->vbus_pin[i])
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@ -179,7 +179,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
if (data && data->vbus_pin > 0) {
if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@ -200,7 +200,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@ -227,12 +227,12 @@ static struct platform_device at91cap9_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@ -264,7 +264,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91cap9_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@ -332,13 +332,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
if (mmc_id == 0) { /* MCI0 */
@ -398,8 +398,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_BASE_SYS + AT91_ECC,
.end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
.start = AT91CAP9_BASE_ECC,
.end = AT91CAP9_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -425,15 +425,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@ -670,8 +670,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT,
.end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
.start = AT91CAP9_BASE_RTT,
.end = AT91CAP9_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -694,10 +694,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91CAP9_BASE_WDT,
.end = AT91CAP9_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91cap9_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@ -807,7 +816,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
/* reset */
if (data->reset_pin)
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@ -1021,8 +1030,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91CAP9_BASE_DBGU,
.end = AT91CAP9_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {

24
arch/arm/mach-at91/at91rm9200.c
View File

@ -23,6 +23,7 @@
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
static struct map_desc at91rm9200_io_desc[] __initdata = {
{
@ -195,6 +196,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -268,23 +273,19 @@ void __init at91rm9200_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91rm9200_gpio[] = {
static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
{
.id = AT91RM9200_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
.regbase = AT91RM9200_BASE_PIOA,
}, {
.id = AT91RM9200_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
.regbase = AT91RM9200_BASE_PIOB,
}, {
.id = AT91RM9200_ID_PIOC,
.offset = AT91_PIOC,
.clock = &pioC_clk,
.regbase = AT91RM9200_BASE_PIOC,
}, {
.id = AT91RM9200_ID_PIOD,
.offset = AT91_PIOD,
.clock = &pioD_clk,
.regbase = AT91RM9200_BASE_PIOD,
}
};
@ -307,6 +308,10 @@ static void __init at91rm9200_map_io(void)
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
}
static void __init at91rm9200_ioremap_registers(void)
{
}
static void __init at91rm9200_initialize(void)
{
arm_pm_restart = at91rm9200_restart;
@ -366,6 +371,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91rm9200_soc = {
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
.ioremap_registers = at91rm9200_ioremap_registers,
.register_clocks = at91rm9200_register_clocks,
.init = at91rm9200_initialize,
};

48
arch/arm/mach-at91/at91rm9200_devices.c
View File

@ -114,11 +114,11 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
if (data->vbus_pin) {
if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
if (data->pullup_pin)
if (gpio_is_valid(data->pullup_pin))
at91_set_gpio_output(data->pullup_pin, 0);
udc_data = *data;
@ -135,7 +135,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@ -162,12 +162,12 @@ static struct platform_device at91rm9200_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@ -199,7 +199,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91rm9200_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@ -260,7 +260,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
);
/* input/irq */
if (data->irq_pin) {
if (gpio_is_valid(data->irq_pin)) {
at91_set_gpio_input(data->irq_pin, 1);
at91_set_deglitch(data->irq_pin, 1);
}
@ -268,7 +268,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_set_deglitch(data->det_pin, 1);
/* outputs, initially off */
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
at91_set_gpio_output(data->rst_pin, 0);
@ -328,13 +328,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@ -419,15 +419,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
@ -665,10 +665,24 @@ static void __init at91_add_device_tc(void) { }
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct resource rtc_resources[] = {
[0] = {
.start = AT91RM9200_BASE_RTC,
.end = AT91RM9200_BASE_RTC + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_SYS,
.end = AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91rm9200_rtc_device = {
.name = "at91_rtc",
.id = -1,
.num_resources = 0,
.resource = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
};
static void __init at91_add_device_rtc(void)
@ -877,8 +891,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91RM9200_BASE_DBGU,
.end = AT91RM9200_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {

8
arch/arm/mach-at91/at91rm9200_time.c
View File

@ -32,6 +32,8 @@ static unsigned long last_crtr;
static u32 irqmask;
static struct clock_event_device clkevt;
#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
/*
* The ST_CRTR is updated asynchronously to the master clock ... but
* the updates as seen by the CPU don't seem to be strictly monotonic.
@ -74,8 +76,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
if (sr & AT91_ST_PITS) {
u32 crtr = read_CRTR();
while (((crtr - last_crtr) & AT91_ST_CRTV) >= LATCH) {
last_crtr += LATCH;
while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
last_crtr += RM9200_TIMER_LATCH;
clkevt.event_handler(&clkevt);
}
return IRQ_HANDLED;
@ -116,7 +118,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
case CLOCK_EVT_MODE_PERIODIC:
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
at91_sys_write(AT91_ST_PIMR, LATCH);
at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* ALM for oneshot irqs, set by next_event()

36
arch/arm/mach-at91/at91sam9260.c
View File

@ -11,7 +11,6 @@
*/
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@ -21,11 +20,11 @@
#include <mach/at91sam9260.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@ -120,7 +119,7 @@ static struct clk ohci_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "macb_clk",
.name = "pclk",
.pmc_mask = 1 << AT91SAM9260_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@ -190,6 +189,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for macb_hclk */
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
@ -209,6 +210,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -270,28 +274,19 @@ void __init at91sam9260_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9260_gpio[] = {
static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
{
.id = AT91SAM9260_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
.regbase = AT91SAM9260_BASE_PIOA,
}, {
.id = AT91SAM9260_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
.regbase = AT91SAM9260_BASE_PIOB,
}, {
.id = AT91SAM9260_ID_PIOC,
.offset = AT91_PIOC,
.clock = &pioC_clk,
.regbase = AT91SAM9260_BASE_PIOC,
}
};
static void at91sam9260_poweroff(void)
{
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
@ -325,10 +320,16 @@ static void __init at91sam9260_map_io(void)
}
}
static void __init at91sam9260_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
}
static void __init at91sam9260_initialize(void)
{
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9260_poweroff;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
@ -381,6 +382,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9260_soc = {
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
.ioremap_registers = at91sam9260_ioremap_registers,
.register_clocks = at91sam9260_register_clocks,
.init = at91sam9260_initialize,
};

55
arch/arm/mach-at91/at91sam9260_devices.c
View File

@ -115,7 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
if (data->vbus_pin) {
if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
@ -136,7 +136,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@ -163,12 +163,12 @@ static struct platform_device at91sam9260_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@ -200,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91sam9260_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@ -243,13 +243,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@ -330,11 +330,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (data->slot[i].bus_width) {
/* input/irq */
if (data->slot[i].detect_pin) {
if (gpio_is_valid(data->slot[i].detect_pin)) {
at91_set_gpio_input(data->slot[i].detect_pin, 1);
at91_set_deglitch(data->slot[i].detect_pin, 1);
}
if (data->slot[i].wp_pin)
if (gpio_is_valid(data->slot[i].wp_pin))
at91_set_gpio_input(data->slot[i].wp_pin, 1);
switch (i) {
@ -399,8 +399,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_BASE_SYS + AT91_ECC,
.end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
.start = AT91SAM9260_BASE_ECC,
.end = AT91SAM9260_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -426,15 +426,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@ -714,8 +714,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT,
.end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
.start = AT91SAM9260_BASE_RTT,
.end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -738,10 +738,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9260_BASE_WDT,
.end = AT91SAM9260_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9260_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@ -837,8 +846,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91SAM9260_BASE_DBGU,
.end = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -1281,17 +1290,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa);
if (data->rst_pin) {
if (gpio_is_valid(data->rst_pin)) {
at91_set_multi_drive(data->rst_pin, 0);
at91_set_gpio_output(data->rst_pin, 1);
}
if (data->irq_pin) {
if (gpio_is_valid(data->irq_pin)) {
at91_set_gpio_input(data->irq_pin, 0);
at91_set_deglitch(data->irq_pin, 1);
}
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 0);
at91_set_deglitch(data->det_pin, 1);
}

32
arch/arm/mach-at91/at91sam9261.c
View File

@ -11,7 +11,6 @@
*/
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@ -20,11 +19,11 @@
#include <mach/at91sam9261.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@ -176,6 +175,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -251,28 +253,19 @@ void __init at91sam9261_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9261_gpio[] = {
static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
{
.id = AT91SAM9261_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
.regbase = AT91SAM9261_BASE_PIOA,
}, {
.id = AT91SAM9261_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
.regbase = AT91SAM9261_BASE_PIOB,
}, {
.id = AT91SAM9261_ID_PIOC,
.offset = AT91_PIOC,
.clock = &pioC_clk,
.regbase = AT91SAM9261_BASE_PIOC,
}
};
static void at91sam9261_poweroff(void)
{
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
/* --------------------------------------------------------------------
* AT91SAM9261 processor initialization
* -------------------------------------------------------------------- */
@ -285,10 +278,16 @@ static void __init at91sam9261_map_io(void)
at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
}
static void __init at91sam9261_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
}
static void __init at91sam9261_initialize(void)
{
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
@ -341,6 +340,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9261_soc = {
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
.ioremap_registers = at91sam9261_ioremap_registers,
.register_clocks = at91sam9261_register_clocks,
.init = at91sam9261_initialize,
};

33
arch/arm/mach-at91/at91sam9261_devices.c
View File

@ -118,7 +118,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
if (data->vbus_pin) {
if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
@ -171,13 +171,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@ -240,15 +240,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
@ -600,8 +600,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT,
.end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
.start = AT91SAM9261_BASE_RTT,
.end = AT91SAM9261_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -624,10 +624,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9261_BASE_WDT,
.end = AT91SAM9261_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9261_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@ -816,8 +825,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91SAM9261_BASE_DBGU,
.end = AT91SAM9261_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {

45
arch/arm/mach-at91/at91sam9263.c
View File

@ -11,7 +11,6 @@
*/
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@ -19,11 +18,11 @@
#include <mach/at91sam9263.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@ -118,7 +117,7 @@ static struct clk pwm_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "macb_clk",
.name = "pclk",
.pmc_mask = 1 << AT91SAM9263_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@ -182,6 +181,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for macb_hclk */
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@ -191,6 +192,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioCDE_clk),
CLKDEV_CON_ID("pioD", &pioCDE_clk),
CLKDEV_CON_ID("pioE", &pioCDE_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -263,36 +269,25 @@ void __init at91sam9263_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9263_gpio[] = {
static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
{
.id = AT91SAM9263_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
.regbase = AT91SAM9263_BASE_PIOA,
}, {
.id = AT91SAM9263_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
.regbase = AT91SAM9263_BASE_PIOB,
}, {
.id = AT91SAM9263_ID_PIOCDE,
.offset = AT91_PIOC,
.clock = &pioCDE_clk,
.regbase = AT91SAM9263_BASE_PIOC,
}, {
.id = AT91SAM9263_ID_PIOCDE,
.offset = AT91_PIOD,
.clock = &pioCDE_clk,
.regbase = AT91SAM9263_BASE_PIOD,
}, {
.id = AT91SAM9263_ID_PIOCDE,
.offset = AT91_PIOE,
.clock = &pioCDE_clk,
.regbase = AT91SAM9263_BASE_PIOE,
}
};
static void at91sam9263_poweroff(void)
{
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
* -------------------------------------------------------------------- */
@ -303,10 +298,17 @@ static void __init at91sam9263_map_io(void)
at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
}
static void __init at91sam9263_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
}
static void __init at91sam9263_initialize(void)
{
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9263_poweroff;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
/* Register GPIO subsystem */
@ -358,6 +360,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9263_soc = {
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
.ioremap_registers = at91sam9263_ioremap_registers,
.register_clocks = at91sam9263_register_clocks,
.init = at91sam9263_initialize,
};

59
arch/arm/mach-at91/at91sam9263_devices.c
View File

@ -70,7 +70,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (data->vbus_pin[i])
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@ -123,7 +123,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
if (data->vbus_pin) {
if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
@ -144,7 +144,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@ -171,12 +171,12 @@ static struct platform_device at91sam9263_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@ -208,7 +208,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91sam9263_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@ -276,13 +276,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
if (mmc_id == 0) { /* MCI0 */
@ -430,17 +430,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
}
at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->irq_pin) {
if (gpio_is_valid(data->irq_pin)) {
at91_set_gpio_input(data->irq_pin, 1);
at91_set_deglitch(data->irq_pin, 1);
}
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
/* initially off */
at91_set_gpio_output(data->vcc_pin, 0);
@ -473,8 +473,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_BASE_SYS + AT91_ECC0,
.end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
.start = AT91SAM9263_BASE_ECC0,
.end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -500,15 +500,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@ -749,7 +749,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
/* reset */
if (data->reset_pin)
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@ -956,8 +956,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt0_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT0,
.end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
.start = AT91SAM9263_BASE_RTT0,
.end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -971,8 +971,8 @@ static struct platform_device at91sam9263_rtt0_device = {
static struct resource rtt1_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT1,
.end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
.start = AT91SAM9263_BASE_RTT1,
.end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -996,10 +996,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9263_BASE_WDT,
.end = AT91SAM9263_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9263_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@ -1196,8 +1205,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91SAM9263_BASE_DBGU,
.end = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {

38
arch/arm/mach-at91/at91sam926x_time.c
View File

@ -25,7 +25,17 @@
static u32 pit_cycle; /* write-once */
static u32 pit_cnt; /* access only w/system irq blocked */
static void __iomem *pit_base_addr __read_mostly;
static inline unsigned int pit_read(unsigned int reg_offset)
{
return __raw_readl(pit_base_addr + reg_offset);
}
static inline void pit_write(unsigned int reg_offset, unsigned long value)
{
__raw_writel(value, pit_base_addr + reg_offset);
}
/*
* Clocksource: just a monotonic counter of MCK/16 cycles.
@ -39,7 +49,7 @@ static cycle_t read_pit_clk(struct clocksource *cs)
raw_local_irq_save(flags);
elapsed = pit_cnt;
t = at91_sys_read(AT91_PIT_PIIR);
t = pit_read(AT91_PIT_PIIR);
raw_local_irq_restore(flags);
elapsed += PIT_PICNT(t) * pit_cycle;
@ -64,8 +74,8 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* update clocksource counter */
pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR));
pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
| AT91_PIT_PITIEN);
break;
case CLOCK_EVT_MODE_ONESHOT:
@ -74,7 +84,7 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
/* disable irq, leaving the clocksource active */
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
break;
case CLOCK_EVT_MODE_RESUME:
break;
@ -103,11 +113,11 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
/* The PIT interrupt may be disabled, and is shared */
if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
&& (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
&& (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
unsigned nr_ticks;
/* Get number of ticks performed before irq, and ack it */
nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR));
do {
pit_cnt += pit_cycle;
pit_clkevt.event_handler(&pit_clkevt);
@ -129,14 +139,14 @@ static struct irqaction at91sam926x_pit_irq = {
static void at91sam926x_pit_reset(void)
{
/* Disable timer and irqs */
at91_sys_write(AT91_PIT_MR, 0);
pit_write(AT91_PIT_MR, 0);
/* Clear any pending interrupts, wait for PIT to stop counting */
while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
cpu_relax();
/* Start PIT but don't enable IRQ */
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
}
/*
@ -178,7 +188,15 @@ static void __init at91sam926x_pit_init(void)
static void at91sam926x_pit_suspend(void)
{
/* Disable timer */
at91_sys_write(AT91_PIT_MR, 0);
pit_write(AT91_PIT_MR, 0);
}
void __init at91sam926x_ioremap_pit(u32 addr)
{
pit_base_addr = ioremap(addr, 16);
if (!pit_base_addr)
panic("Impossible to ioremap PIT\n");
}
struct sys_timer at91sam926x_timer = {

44
arch/arm/mach-at91/at91sam9g45.c
View File

@ -11,7 +11,6 @@
*/
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
@ -20,12 +19,12 @@
#include <mach/at91sam9g45.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@ -150,7 +149,7 @@ static struct clk ac97_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "macb_clk",
.name = "pclk",
.pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@ -209,6 +208,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for macb_hclk */
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
@ -231,6 +232,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioDE_clk),
CLKDEV_CON_ID("pioE", &pioDE_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -293,27 +299,22 @@ void __init at91sam9g45_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9g45_gpio[] = {
static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
{
.id = AT91SAM9G45_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
.regbase = AT91SAM9G45_BASE_PIOA,
}, {
.id = AT91SAM9G45_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
.regbase = AT91SAM9G45_BASE_PIOB,
}, {
.id = AT91SAM9G45_ID_PIOC,
.offset = AT91_PIOC,
.clock = &pioC_clk,
.regbase = AT91SAM9G45_BASE_PIOC,
}, {
.id = AT91SAM9G45_ID_PIODE,
.offset = AT91_PIOD,
.clock = &pioDE_clk,
.regbase = AT91SAM9G45_BASE_PIOD,
}, {
.id = AT91SAM9G45_ID_PIODE,
.offset = AT91_PIOE,
.clock = &pioDE_clk,
.regbase = AT91SAM9G45_BASE_PIOE,
}
};
@ -322,12 +323,6 @@ static void at91sam9g45_restart(char mode, const char *cmd)
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
static void at91sam9g45_poweroff(void)
{
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
@ -338,10 +333,16 @@ static void __init at91sam9g45_map_io(void)
init_consistent_dma_size(SZ_4M);
}
static void __init at91sam9g45_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
}
static void __init at91sam9g45_initialize(void)
{
arm_pm_restart = at91sam9g45_restart;
pm_power_off = at91sam9g45_poweroff;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
/* Register GPIO subsystem */
@ -393,6 +394,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9g45_soc = {
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.ioremap_registers = at91sam9g45_ioremap_registers,
.register_clocks = at91sam9g45_register_clocks,
.init = at91sam9g45_initialize,
};

69
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -44,8 +44,8 @@ static struct at_dma_platform_data atdma_pdata = {
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DMA,
.end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
.start = AT91SAM9G45_BASE_DMA,
.end = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -120,7 +120,7 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (data->vbus_pin[i])
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@ -181,7 +181,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (data->vbus_pin[i])
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@ -263,7 +263,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
if (data && data->vbus_pin > 0) {
if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@ -284,7 +284,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@ -311,12 +311,12 @@ static struct platform_device at91sam9g45_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@ -348,7 +348,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91sam9g45_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@ -449,11 +449,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
/* input/irq */
if (data->slot[0].detect_pin) {
if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
if (data->slot[0].wp_pin)
if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
if (mmc_id == 0) { /* MCI0 */
@ -529,8 +529,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_BASE_SYS + AT91_ECC,
.end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
.start = AT91SAM9G45_BASE_ECC,
.end = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -556,15 +556,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@ -859,7 +859,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
/* reset */
if (data->reset_pin)
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@ -1009,10 +1009,24 @@ static void __init at91_add_device_tc(void) { }
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct resource rtc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_RTC,
.end = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_SYS,
.end = AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_rtc_device = {
.name = "at91_rtc",
.id = -1,
.num_resources = 0,
.resource = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
};
static void __init at91_add_device_rtc(void)
@ -1081,8 +1095,8 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
static struct resource rtt_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT,
.end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
.start = AT91SAM9G45_BASE_RTT,
.end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -1133,10 +1147,19 @@ static void __init at91_add_device_trng(void) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9G45_BASE_WDT,
.end = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@ -1332,8 +1355,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91SAM9G45_BASE_DBGU,
.end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {

36
arch/arm/mach-at91/at91sam9rl.c
View File

@ -10,7 +10,6 @@
*/
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@ -20,11 +19,11 @@
#include <mach/at91sam9rl.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@ -184,6 +183,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@ -243,32 +246,22 @@ void __init at91sam9rl_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9rl_gpio[] = {
static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
{
.id = AT91SAM9RL_ID_PIOA,
.offset = AT91_PIOA,
.clock = &pioA_clk,
.regbase = AT91SAM9RL_BASE_PIOA,
}, {
.id = AT91SAM9RL_ID_PIOB,
.offset = AT91_PIOB,
.clock = &pioB_clk,
.regbase = AT91SAM9RL_BASE_PIOB,
}, {
.id = AT91SAM9RL_ID_PIOC,
.offset = AT91_PIOC,
.clock = &pioC_clk,
.regbase = AT91SAM9RL_BASE_PIOC,
}, {
.id = AT91SAM9RL_ID_PIOD,
.offset = AT91_PIOD,
.clock = &pioD_clk,
.regbase = AT91SAM9RL_BASE_PIOD,
}
};
static void at91sam9rl_poweroff(void)
{
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
* -------------------------------------------------------------------- */
@ -290,10 +283,16 @@ static void __init at91sam9rl_map_io(void)
at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
}
static void __init at91sam9rl_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
}
static void __init at91sam9rl_initialize(void)
{
arm_pm_restart = at91sam9_alt_restart;
pm_power_off = at91sam9rl_poweroff;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
/* Register GPIO subsystem */
@ -345,6 +344,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9rl_soc = {
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.ioremap_registers = at91sam9rl_ioremap_registers,
.register_clocks = at91sam9rl_register_clocks,
.init = at91sam9rl_initialize,
};

43
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -39,8 +39,8 @@ static struct at_dma_platform_data atdma_pdata = {
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DMA,
.end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
.start = AT91SAM9RL_BASE_DMA,
.end = AT91SAM9RL_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
@ -147,7 +147,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
if (data && data->vbus_pin > 0) {
if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@ -201,13 +201,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
if (data->det_pin) {
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
if (data->vcc_pin)
if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@ -248,8 +248,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_BASE_SYS + AT91_ECC,
.end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
.start = AT91SAM9RL_BASE_ECC,
.end = AT91SAM9RL_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -275,15 +275,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
@ -483,7 +483,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
/* reset */
if (data->reset_pin)
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@ -685,8 +685,8 @@ static void __init at91_add_device_rtc(void) {}
static struct resource rtt_resources[] = {
{
.start = AT91_BASE_SYS + AT91_RTT,
.end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
.start = AT91SAM9RL_BASE_RTT,
.end = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@ -709,10 +709,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9RL_BASE_WDT,
.end = AT91SAM9RL_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9rl_wdt_device = {
.name = "at91_wdt",
.id = -1,
.num_resources = 0,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@ -908,8 +917,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91SAM9RL_BASE_DBGU,
.end = AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {

4
arch/arm/mach-at91/board-1arm.c
View File

@ -63,13 +63,15 @@ static void __init onearm_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata onearm_eth_data = {
static struct macb_platform_data __initdata onearm_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata onearm_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata onearm_udc_data = {

10
arch/arm/mach-at91/board-afeb-9260v1.c
View File

@ -75,6 +75,8 @@ static void __init afeb9260_init_early(void)
*/
static struct at91_usbh_data __initdata afeb9260_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
*/
static struct at91_udc_data __initdata afeb9260_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -103,7 +105,7 @@ static struct spi_board_info afeb9260_spi_devices[] = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata afeb9260_macb_data = {
static struct macb_platform_data __initdata afeb9260_macb_data = {
.phy_irq_pin = AT91_PIN_PA9,
.is_rmii = 0,
};
@ -138,6 +140,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
.bus_width_16 = 0,
.parts = afeb9260_nand_partition,
.num_parts = ARRAY_SIZE(afeb9260_nand_partition),
.det_pin = -EINVAL,
};
@ -149,6 +152,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
.wp_pin = AT91_PIN_PC4,
.slot_b = 1,
.wire4 = 1,
.vcc_pin = -EINVAL,
};
@ -169,6 +173,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
static struct at91_cf_data afeb9260_cf_data = {
.chipselect = 4,
.irq_pin = AT91_PIN_PA6,
.det_pin = -EINVAL,
.vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PA7,
.flags = AT91_CF_TRUE_IDE,
};

8
arch/arm/mach-at91/board-cam60.c
View File

@ -62,6 +62,8 @@ static void __init cam60_init_early(void)
*/
static struct at91_usbh_data __initdata cam60_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
@ -115,7 +117,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
/*
* MACB Ethernet device
*/
static struct __initdata at91_eth_data cam60_macb_data = {
static struct __initdata macb_platform_data cam60_macb_data = {
.phy_irq_pin = AT91_PIN_PB5,
.is_rmii = 0,
};
@ -135,7 +137,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
static struct atmel_nand_data __initdata cam60_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not there
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
.parts = cam60_nand_partition,
@ -163,7 +165,7 @@ static struct sam9_smc_config __initdata cam60_nand_smc_config = {
static void __init cam60_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &cam60_nand_smc_config);
sam9_smc_configure(0, 3, &cam60_nand_smc_config);
at91_add_device_nand(&cam60_nand_data);
}

21
arch/arm/mach-at91/board-cap9adk.c
View File

@ -70,6 +70,8 @@ static void __init cap9adk_init_early(void)
*/
static struct at91_usbh_data __initdata cap9adk_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -144,16 +146,17 @@ static struct spi_board_info cap9adk_spi_devices[] = {
*/
static struct at91_mmc_data __initdata cap9adk_mmc_data = {
.wire4 = 1,
// .det_pin = ... not connected
// .wp_pin = ... not connected
// .vcc_pin = ... not connected
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata cap9adk_macb_data = {
static struct macb_platform_data __initdata cap9adk_macb_data = {
.phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
@ -172,8 +175,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
static struct atmel_nand_data __initdata cap9adk_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
// .rdy_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = -EINVAL,
.enable_pin = AT91_PIN_PD15,
.parts = cap9adk_nand_partitions,
.num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
@ -212,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &cap9adk_nand_smc_config);
sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
at91_add_device_nand(&cap9adk_nand_data);
}
@ -282,7 +285,7 @@ static __init void cap9adk_add_device_nor(void)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
/* configure chip-select 0 (NOR) */
sam9_smc_configure(0, &cap9adk_nor_smc_config);
sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
platform_device_register(&cap9adk_nor_flash);
}
@ -351,7 +354,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
* AC97
*/
static struct ac97c_platform_data cap9adk_ac97_data = {
// .reset_pin = ... not connected
.reset_pin = -EINVAL,
};

9
arch/arm/mach-at91/board-carmeva.c
View File

@ -57,13 +57,15 @@ static void __init carmeva_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata carmeva_eth_data = {
static struct macb_platform_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata carmeva_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata carmeva_udc_data = {
@ -75,8 +77,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
// static struct at91_cf_data __initdata carmeva_cf_data = {
// .det_pin = AT91_PIN_PB0,
// .rst_pin = AT91_PIN_PC5,
// .irq_pin = ... not connected
// .vcc_pin = ... always powered
// .irq_pin = -EINVAL,
// .vcc_pin = -EINVAL,
// };
static struct at91_mmc_data __initdata carmeva_mmc_data = {
@ -84,6 +86,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PB10,
.wp_pin = AT91_PIN_PC14,
.vcc_pin = -EINVAL,
};
static struct spi_board_info carmeva_spi_devices[] = {

14
arch/arm/mach-at91/board-cpu9krea.c
View File

@ -86,6 +86,8 @@ static void __init cpu9krea_init_early(void)
*/
static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -93,13 +95,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
*/
static struct at91_udc_data __initdata cpu9krea_udc_data = {
.vbus_pin = AT91_PIN_PC8,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata cpu9krea_macb_data = {
static struct macb_platform_data __initdata cpu9krea_macb_data = {
.phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
@ -112,6 +115,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.det_pin = -EINVAL,
};
#ifdef CONFIG_MACH_CPU9260
@ -156,7 +160,7 @@ static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
static void __init cpu9krea_add_device_nand(void)
{
sam9_smc_configure(3, &cpu9krea_nand_smc_config);
sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
at91_add_device_nand(&cpu9krea_nand_data);
}
@ -238,7 +242,7 @@ static __init void cpu9krea_add_device_nor(void)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
/* configure chip-select 0 (NOR) */
sam9_smc_configure(0, &cpu9krea_nor_smc_config);
sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
platform_device_register(&cpu9krea_nor_flash);
}
@ -337,6 +341,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PA29,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
static void __init cpu9krea_board_init(void)

7
arch/arm/mach-at91/board-cpuat91.c
View File

@ -82,12 +82,15 @@ static void __init cpuat91_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata cpuat91_eth_data = {
static struct macb_platform_data __initdata cpuat91_eth_data = {
.phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata cpuat91_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata cpuat91_udc_data = {
@ -98,6 +101,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
static struct at91_mmc_data __initdata cpuat91_mmc_data = {
.det_pin = AT91_PIN_PC2,
.wire4 = 1,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
static struct physmap_flash_data cpuat91_flash_data = {

7
arch/arm/mach-at91/board-csb337.c
View File

@ -58,18 +58,20 @@ static void __init csb337_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata csb337_eth_data = {
static struct macb_platform_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata csb337_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata csb337_udc_data = {
// this has no VBUS sensing pin
.pullup_pin = AT91_PIN_PA24,
.vbus_pin = -EINVAL,
};
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@ -98,6 +100,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PD6,
.vcc_pin = -EINVAL,
};
static struct spi_board_info csb337_spi_devices[] = {

4
arch/arm/mach-at91/board-csb637.c
View File

@ -52,13 +52,15 @@ static void __init csb637_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata csb637_eth_data = {
static struct macb_platform_data __initdata csb637_eth_data = {
.phy_irq_pin = AT91_PIN_PC0,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata csb637_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata csb637_udc_data = {

3
arch/arm/mach-at91/board-dt.c
View File

@ -50,6 +50,7 @@ static void __init ek_init_early(void)
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
};
@ -82,7 +83,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}

11
arch/arm/mach-at91/board-eb9200.c
View File

@ -60,13 +60,15 @@ static void __init eb9200_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata eb9200_eth_data = {
static struct macb_platform_data __initdata eb9200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata eb9200_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata eb9200_udc_data = {
@ -75,15 +77,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = {
};
static struct at91_cf_data __initdata eb9200_cf_data = {
.irq_pin = -EINVAL,
.det_pin = AT91_PIN_PB0,
.vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PC5,
// .irq_pin = ... not connected
// .vcc_pin = ... always powered
};
static struct at91_mmc_data __initdata eb9200_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
static struct i2c_board_info __initdata eb9200_i2c_devices[] = {

7
arch/arm/mach-at91/board-ecbat91.c
View File

@ -64,18 +64,23 @@ static void __init ecb_at91init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata ecb_at91eth_data = {
static struct macb_platform_data __initdata ecb_at91eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata ecb_at91usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_mmc_data __initdata ecb_at91mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};

7
arch/arm/mach-at91/board-eco920.c
View File

@ -47,13 +47,15 @@ static void __init eco920_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata eco920_eth_data = {
static struct macb_platform_data __initdata eco920_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata eco920_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata eco920_udc_data = {
@ -64,6 +66,9 @@ static struct at91_udc_data __initdata eco920_udc_data = {
static struct at91_mmc_data __initdata eco920_mmc_data = {
.slot_b = 0,
.wire4 = 0,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
static struct physmap_flash_data eco920_flash_data = {

5
arch/arm/mach-at91/board-flexibity.c
View File

@ -52,12 +52,14 @@ static void __init flexibity_init_early(void)
/* USB Host port */
static struct at91_usbh_data __initdata flexibity_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/* USB Device port */
static struct at91_udc_data __initdata flexibity_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/* SPI devices */
@ -76,6 +78,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
.vcc_pin = -EINVAL,
};
/* LEDs */

9
arch/arm/mach-at91/board-foxg20.c
View File

@ -106,6 +106,8 @@ static void __init foxg20_init_early(void)
*/
static struct at91_usbh_data __initdata foxg20_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -113,7 +115,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = {
*/
static struct at91_udc_data __initdata foxg20_udc_data = {
.vbus_pin = AT91_PIN_PC6,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -135,7 +137,7 @@ static struct spi_board_info foxg20_spi_devices[] = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata foxg20_macb_data = {
static struct macb_platform_data __initdata foxg20_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@ -147,6 +149,9 @@ static struct at91_eth_data __initdata foxg20_macb_data = {
static struct at91_mmc_data __initdata foxg20_mmc_data = {
.slot_b = 1,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};

7
arch/arm/mach-at91/board-gsia18s.c
View File

@ -80,6 +80,8 @@ static void __init gsia18s_init_early(void)
*/
static struct at91_usbh_data __initdata usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -87,13 +89,13 @@ static struct at91_usbh_data __initdata usbh_data = {
*/
static struct at91_udc_data __initdata udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata macb_data = {
static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
@ -530,6 +532,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
static struct at91_cf_data __initdata gsia18s_cf1_data = {
.irq_pin = AT91_PIN_PA27,
.det_pin = AT91_PIN_PB30,
.vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PB31,
.chipselect = 5,
.flags = AT91_CF_TRUE_IDE,

4
arch/arm/mach-at91/board-kafa.c
View File

@ -61,13 +61,15 @@ static void __init kafa_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata kafa_eth_data = {
static struct macb_platform_data __initdata kafa_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata kafa_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata kafa_udc_data = {

8
arch/arm/mach-at91/board-kb9202.c
View File

@ -69,13 +69,15 @@ static void __init kb9202_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata kb9202_eth_data = {
static struct macb_platform_data __initdata kb9202_eth_data = {
.phy_irq_pin = AT91_PIN_PB29,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata kb9202_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata kb9202_udc_data = {
@ -87,6 +89,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
.det_pin = AT91_PIN_PB2,
.slot_b = 0,
.wire4 = 1,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
static struct mtd_partition __initdata kb9202_nand_partition[] = {
@ -100,7 +104,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
static struct atmel_nand_data __initdata kb9202_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not there
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
.parts = kb9202_nand_partition,

9
arch/arm/mach-at91/board-neocore926.c
View File

@ -72,6 +72,7 @@ static void __init neocore926_init_early(void)
static struct at91_usbh_data __initdata neocore926_usbh_data = {
.ports = 2,
.vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = {
*/
static struct at91_udc_data __initdata neocore926_udc_data = {
.vbus_pin = AT91_PIN_PA25,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -149,13 +150,14 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
.vcc_pin = -EINVAL,
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata neocore926_macb_data = {
static struct macb_platform_data __initdata neocore926_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@ -190,6 +192,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
.enable_pin = AT91_PIN_PD15,
.parts = neocore926_nand_partition,
.num_parts = ARRAY_SIZE(neocore926_nand_partition),
.det_pin = -EINVAL,
};
static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
@ -213,7 +216,7 @@ static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
static void __init neocore926_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &neocore926_nand_smc_config);
sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
at91_add_device_nand(&neocore926_nand_data);
}

8
arch/arm/mach-at91/board-pcontrol-g20.c
View File

@ -96,9 +96,9 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
sam9_smc_configure(4, &pcontrol_smc_config[0]);
sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
/* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */
sam9_smc_configure(7, &pcontrol_smc_config[1]);
sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
}
@ -107,6 +107,8 @@ static void __init add_device_pcontrol(void)
*/
static struct at91_usbh_data __initdata usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
@ -122,7 +124,7 @@ static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata macb_data = {
static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};

5
arch/arm/mach-at91/board-picotux200.c
View File

@ -60,13 +60,15 @@ static void __init picotux200_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata picotux200_eth_data = {
static struct macb_platform_data __initdata picotux200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata picotux200_usbh_data = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_mmc_data __initdata picotux200_mmc_data = {
@ -74,6 +76,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
.vcc_pin = -EINVAL,
};
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0

18
arch/arm/mach-at91/board-qil-a9260.c
View File

@ -77,6 +77,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -84,7 +86,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
@ -104,7 +106,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA31,
.is_rmii = 1,
};
@ -133,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@ -161,7 +163,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -172,9 +174,9 @@ static void __init ek_add_device_nand(void)
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 0,
.wire4 = 1,
// .det_pin = ... not connected
// .wp_pin = ... not connected
// .vcc_pin = ... not connected
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
/*
@ -251,7 +253,7 @@ static void __init ek_board_init(void)
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}

13
arch/arm/mach-at91/board-rm9200dk.c
View File

@ -65,13 +65,15 @@ static void __init dk_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata dk_eth_data = {
static struct macb_platform_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata dk_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata dk_udc_data = {
@ -80,16 +82,19 @@ static struct at91_udc_data __initdata dk_udc_data = {
};
static struct at91_cf_data __initdata dk_cf_data = {
.irq_pin = -EINVAL,
.det_pin = AT91_PIN_PB0,
.vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PC5,
// .irq_pin = ... not connected
// .vcc_pin = ... always powered
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
#endif
@ -143,7 +148,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
.cle = 21,
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
// .enable_pin = ... not there
.enable_pin = -EINVAL,
.parts = dk_nand_partition,
.num_parts = ARRAY_SIZE(dk_nand_partition),
};

5
arch/arm/mach-at91/board-rm9200ek.c
View File

@ -65,13 +65,15 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static struct at91_eth_data __initdata ek_eth_data = {
static struct macb_platform_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata ek_udc_data = {
@ -85,6 +87,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
.vcc_pin = -EINVAL,
};
#endif

4
arch/arm/mach-at91/board-rsi-ews.c
View File

@ -60,7 +60,7 @@ static void __init rsi_ews_init_early(void)
/*
* Ethernet
*/
static struct at91_eth_data rsi_ews_eth_data __initdata = {
static struct macb_platform_data rsi_ews_eth_data __initdata = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
@ -70,6 +70,8 @@ static struct at91_eth_data rsi_ews_eth_data __initdata = {
*/
static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
.ports = 1,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*

12
arch/arm/mach-at91/board-sam9-l9260.c
View File

@ -72,6 +72,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -79,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -109,7 +111,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 0,
};
@ -134,7 +136,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@ -162,7 +164,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -176,7 +178,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PC8,
.wp_pin = AT91_PIN_PC4,
// .vcc_pin = ... not connected
.vcc_pin = -EINVAL,
};
static void __init ek_board_init(void)

16
arch/arm/mach-at91/board-sam9260ek.c
View File

@ -75,6 +75,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -151,7 +153,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@ -176,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@ -211,7 +213,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -223,9 +225,9 @@ static void __init ek_add_device_nand(void)
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1,
.wire4 = 1,
// .det_pin = ... not connected
// .wp_pin = ... not connected
// .vcc_pin = ... not connected
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};

13
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -131,7 +131,7 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
static void __init ek_add_device_dm9000(void)
{
/* Configure chip-select 2 (DM9000) */
sam9_smc_configure(2, &dm9000_smc_config);
sam9_smc_configure(0, 2, &dm9000_smc_config);
/* Configure Reset signal as output */
at91_set_gpio_output(AT91_PIN_PC10, 0);
@ -151,6 +151,8 @@ static void __init ek_add_device_dm9000(void) {}
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
@ -159,7 +161,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PB29,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -182,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@ -217,7 +219,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -345,6 +347,9 @@ static struct spi_board_info ek_spi_devices[] = {
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
#endif /* CONFIG_SPI_ATMEL_* */

12
arch/arm/mach-at91/board-sam9263ek.c
View File

@ -74,6 +74,7 @@ static void __init ek_init_early(void)
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -81,7 +82,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PA25,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -151,14 +152,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
// .vcc_pin = ... not connected
.vcc_pin = -EINVAL,
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@ -183,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.parts = ek_nand_partition,
@ -218,7 +219,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -353,6 +354,7 @@ static void __init ek_add_device_buttons(void) {}
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};

13
arch/arm/mach-at91/board-sam9g20ek.c
View File

@ -86,6 +86,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@ -123,7 +125,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
@ -195,7 +198,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC9,
.wp_pin = -EINVAL,
},
};
@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1, /* Only one slot so use slot B */
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
#endif
@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void)
if (ek_have_2mmc()) {
ek_mmc_data.slot[0].bus_width = 4;
ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
ek_mmc_data.slot[0].wp_pin = -1;
}
at91_add_device_mci(0, &ek_mmc_data);
#else

8
arch/arm/mach-at91/board-sam9m10g45ek.c
View File

@ -69,6 +69,7 @@ static void __init ek_init_early(void)
static struct at91_usbh_data __initdata ek_usbh_hs_data = {
.ports = 2,
.vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
@ -100,6 +101,7 @@ static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD10,
.wp_pin = -EINVAL,
},
};
@ -115,7 +117,7 @@ static struct mci_platform_data __initdata mci1_data = {
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PD5,
.is_rmii = 1,
};
@ -143,6 +145,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
@ -175,7 +178,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -330,6 +333,7 @@ static void __init ek_add_device_buttons(void) {}
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};

9
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PA15,
// .wp_pin = ... not connected
// .vcc_pin = ... not connected
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
.parts = ek_nand_partition,
@ -119,7 +119,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};

10
arch/arm/mach-at91/board-snapper9260.c
View File

@ -57,15 +57,19 @@ static void __init snapper9260_init_early(void)
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata snapper9260_udc_data = {
.vbus_pin = SNAPPER9260_IO_EXP_GPIO(5),
.vbus_active_low = 1,
.vbus_polled = 1,
.pullup_pin = -EINVAL,
};
static struct at91_eth_data snapper9260_macb_data = {
static struct macb_platform_data snapper9260_macb_data = {
.phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
@ -104,6 +108,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
.parts = snapper9260_nand_partitions,
.num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
.bus_width_16 = 0,
.enable_pin = -EINVAL,
.det_pin = -EINVAL,
};
static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
@ -149,7 +155,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
static void __init snapper9260_add_device_nand(void)
{
at91_set_A_periph(AT91_PIN_PC14, 0);
sam9_smc_configure(3, &snapper9260_nand_smc_config);
sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
at91_add_device_nand(&snapper9260_nand_data);
}

16
arch/arm/mach-at91/board-stamp9g20.c
View File

@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.det_pin = -EINVAL,
};
static struct sam9_smc_config __initdata nand_smc_config = {
@ -108,7 +109,7 @@ static struct sam9_smc_config __initdata nand_smc_config = {
static void __init add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &nand_smc_config);
sam9_smc_configure(0, 3, &nand_smc_config);
at91_add_device_nand(&nand_data);
}
@ -122,12 +123,17 @@ static void __init add_device_nand(void)
static struct mci_platform_data __initdata mmc_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -1,
.wp_pin = -1,
},
};
#else
static struct at91_mmc_data __initdata mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = -EINVAL,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
#endif
@ -137,6 +143,8 @@ static struct at91_mmc_data __initdata mmc_data = {
*/
static struct at91_usbh_data __initdata usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
@ -145,19 +153,19 @@ static struct at91_usbh_data __initdata usbh_data = {
*/
static struct at91_udc_data __initdata portuxg20_udc_data = {
.vbus_pin = AT91_PIN_PC7,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata macb_data = {
static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};

14
arch/arm/mach-at91/board-usb-a926x.c
View File

@ -66,6 +66,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -73,7 +75,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PB11,
.pullup_pin = 0, /* pull-up driven by UDC */
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
static void __init ek_add_device_udc(void)
@ -146,7 +148,7 @@ static void __init ek_add_device_spi(void)
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@ -193,7 +195,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.parts = ek_nand_partition,
@ -245,9 +247,9 @@ static void __init ek_add_device_nand(void)
/* configure chip-select 3 (NAND) */
if (machine_is_usb_a9g20())
sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
else
sam9_smc_configure(3, &usb_a9260_nand_smc_config);
sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@ -344,7 +346,7 @@ static void __init ek_board_init(void)
/* I2C */
at91_add_device_i2c(NULL, 0);
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
| AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}

9
arch/arm/mach-at91/board-yl-9200.c
View File

@ -110,7 +110,7 @@ static struct gpio_led yl9200_leds[] = {
/*
* Ethernet
*/
static struct at91_eth_data __initdata yl9200_eth_data = {
static struct macb_platform_data __initdata yl9200_eth_data = {
.phy_irq_pin = AT91_PIN_PB28,
.is_rmii = 1,
};
@ -120,6 +120,8 @@ static struct at91_eth_data __initdata yl9200_eth_data = {
*/
static struct at91_usbh_data __initdata yl9200_usbh_data = {
.ports = 1, /* PQFP version of AT91RM9200 */
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@ -137,8 +139,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
*/
static struct at91_mmc_data __initdata yl9200_mmc_data = {
.det_pin = AT91_PIN_PB9,
// .wp_pin = ... not connected
.wire4 = 1,
.wp_pin = -EINVAL,
.vcc_pin = -EINVAL,
};
/*
@ -175,7 +178,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
static struct atmel_nand_data __initdata yl9200_nand_data = {
.ale = 6,
.cle = 7,
// .det_pin = ... not connected
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
.parts = yl9200_nand_partition,

7
arch/arm/mach-at91/generic.h
View File

@ -29,6 +29,7 @@ extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
extern void at91sam926x_ioremap_pit(u32 addr);
extern struct sys_timer at91sam926x_timer;
extern struct sys_timer at91x40_timer;
@ -59,14 +60,16 @@ extern void at91_irq_resume(void);
/* reset */
extern void at91sam9_alt_restart(char, const char *);
/* shutdown */
extern void at91_ioremap_shdwc(u32 base_addr);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
unsigned long regbase; /* offset from system peripheral base */
};
extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
extern void __init at91_gpio_irq_setup(void);

85
arch/arm/mach-at91/gpio.c
View File

@ -29,8 +29,9 @@
struct at91_gpio_chip {
struct gpio_chip chip;
struct at91_gpio_chip *next; /* Bank sharing same clock */
struct at91_gpio_bank *bank; /* Bank definition */
int id; /* ID of register bank */
void __iomem *regbase; /* Base of register bank */
struct clk *clock; /* associated clock */
};
#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
@ -58,18 +59,17 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
}
static struct at91_gpio_chip gpio_chip[] = {
AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
AT91_GPIO_CHIP("pioA", 0x00, 32),
AT91_GPIO_CHIP("pioB", 0x20, 32),
AT91_GPIO_CHIP("pioC", 0x40, 32),
AT91_GPIO_CHIP("pioD", 0x60, 32),
AT91_GPIO_CHIP("pioE", 0x80, 32),
};
static int gpio_banks;
static inline void __iomem *pin_to_controller(unsigned pin)
{
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
return gpio_chip[pin].regbase;
@ -79,7 +79,6 @@ static inline void __iomem *pin_to_controller(unsigned pin)
static inline unsigned pin_to_mask(unsigned pin)
{
pin -= PIN_BASE;
return 1 << (pin % 32);
}
@ -274,8 +273,9 @@ static u32 backups[MAX_GPIO_BANKS];
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
unsigned mask = pin_to_mask(d->irq);
unsigned bank = (d->irq - PIN_BASE) / 32;
unsigned pin = irq_to_gpio(d->irq);
unsigned mask = pin_to_mask(pin);
unsigned bank = pin / 32;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
@ -285,7 +285,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
else
wakeups[bank] &= ~mask;
irq_set_irq_wake(gpio_chip[bank].bank->id, state);
irq_set_irq_wake(gpio_chip[bank].id, state);
return 0;
}
@ -302,7 +302,7 @@ void at91_gpio_suspend(void)
__raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
clk_disable(gpio_chip[i].bank->clock);
clk_disable(gpio_chip[i].clock);
else {
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@ -319,7 +319,7 @@ void at91_gpio_resume(void)
void __iomem *pio = gpio_chip[i].regbase;
if (!wakeups[i])
clk_enable(gpio_chip[i].bank->clock);
clk_enable(gpio_chip[i].clock);
__raw_writel(wakeups[i], pio + PIO_IDR);
__raw_writel(backups[i], pio + PIO_IER);
@ -344,8 +344,9 @@ void at91_gpio_resume(void)
static void gpio_irq_mask(struct irq_data *d)
{
void __iomem *pio = pin_to_controller(d->irq);
unsigned mask = pin_to_mask(d->irq);
unsigned pin = irq_to_gpio(d->irq);
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (pio)
__raw_writel(mask, pio + PIO_IDR);
@ -353,8 +354,9 @@ static void gpio_irq_mask(struct irq_data *d)
static void gpio_irq_unmask(struct irq_data *d)
{
void __iomem *pio = pin_to_controller(d->irq);
unsigned mask = pin_to_mask(d->irq);
unsigned pin = irq_to_gpio(d->irq);
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (pio)
__raw_writel(mask, pio + PIO_IER);
@ -382,7 +384,7 @@ static struct irq_chip gpio_irqchip = {
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
unsigned pin;
unsigned irq_pin;
struct irq_data *idata = irq_desc_get_irq_data(desc);
struct irq_chip *chip = irq_data_get_irq_chip(idata);
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
@ -405,12 +407,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
continue;
}
pin = at91_gpio->chip.base;
irq_pin = gpio_to_irq(at91_gpio->chip.base);
while (isr) {
if (isr & 1)
generic_handle_irq(pin);
pin++;
generic_handle_irq(irq_pin);
irq_pin++;
isr >>= 1;
}
}
@ -438,7 +440,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused)
seq_printf(s, "%i:\t", j);
for (bank = 0; bank < gpio_banks; bank++) {
unsigned pin = PIN_BASE + (32 * bank) + j;
unsigned pin = (32 * bank) + j;
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
@ -491,27 +493,28 @@ static struct lock_class_key gpio_lock_class;
*/
void __init at91_gpio_irq_setup(void)
{
unsigned pioc, pin;
unsigned pioc, irq = gpio_to_irq(0);
struct at91_gpio_chip *this, *prev;
for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
for (pioc = 0, this = gpio_chip, prev = NULL;
pioc++ < gpio_banks;
prev = this, this++) {
unsigned id = this->bank->id;
unsigned id = this->id;
unsigned i;
__raw_writel(~0, this->regbase + PIO_IDR);
for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
irq_set_lockdep_class(pin, &gpio_lock_class);
for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32;
i++, irq++) {
irq_set_lockdep_class(irq, &gpio_lock_class);
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
*/
irq_set_chip_and_handler(pin, &gpio_irqchip,
irq_set_chip_and_handler(irq, &gpio_irqchip,
handle_simple_irq);
set_irq_flags(pin, IRQF_VALID);
set_irq_flags(irq, IRQF_VALID);
}
/* The toplevel handler handles one bank of GPIOs, except
@ -524,7 +527,7 @@ void __init at91_gpio_irq_setup(void)
irq_set_chip_data(id, this);
irq_set_chained_handler(id, gpio_irq_handler);
}
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks);
}
/* gpiolib support */
@ -612,16 +615,26 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
for (i = 0; i < nr_banks; i++) {
at91_gpio = &gpio_chip[i];
at91_gpio->bank = &data[i];
at91_gpio->chip.base = PIN_BASE + i * 32;
at91_gpio->regbase = at91_gpio->bank->offset +
(void __iomem *)AT91_VA_BASE_SYS;
at91_gpio->id = data[i].id;
at91_gpio->chip.base = i * 32;
at91_gpio->regbase = ioremap(data[i].regbase, 512);
if (!at91_gpio->regbase) {
pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
continue;
}
at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
if (!at91_gpio->clock) {
pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
continue;
}
/* enable PIO controller's clock */
clk_enable(at91_gpio->bank->clock);
clk_enable(at91_gpio->clock);
/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
if (last && last->bank->id == at91_gpio->bank->id)
if (last && last->id == at91_gpio->id)
last->next = at91_gpio;
last = at91_gpio;

48
arch/arm/mach-at91/include/mach/at91_aic.h
View File

@ -16,7 +16,19 @@
#ifndef AT91_AIC_H
#define AT91_AIC_H
#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
#ifndef __ASSEMBLY__
extern void __iomem *at91_aic_base;
#define at91_aic_read(field) \
__raw_readl(at91_aic_base + field)
#define at91_aic_write(field, value) \
__raw_writel(value, at91_aic_base + field);
#else
.extern at91_aic_base
#endif
#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
#define AT91_AIC_SRCTYPE_LOW (0 << 5)
@ -24,30 +36,30 @@
#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
#define AT91_AIC_SRCTYPE_RISING (3 << 5)
#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */
#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */
#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */
#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */
#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */
#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */
#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */
#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */
#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */
#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */
#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */
#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */
#define AT91_AIC_DCR 0x138 /* Debug Control Register */
#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */
#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */
#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */
#endif

2
arch/arm/mach-at91/include/mach/at91_dbgu.h
View File

@ -19,7 +19,7 @@
#define dbgu_readl(dbgu, field) \
__raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
#ifdef AT91_DBGU
#if !defined(CONFIG_ARCH_AT91X40)
#define AT91_DBGU_CR (0x00) /* Control Register */
#define AT91_DBGU_MR (0x04) /* Mode Register */
#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */

8
arch/arm/mach-at91/include/mach/at91_pit.h
View File

@ -16,16 +16,16 @@
#ifndef AT91_PIT_H
#define AT91_PIT_H
#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
#define AT91_PIT_SR 0x04 /* Status Register */
#define AT91_PIT_PITS (1 << 0) /* Timer Status */
#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */

24
arch/arm/mach-at91/include/mach/at91_rtc.h
View File

@ -16,7 +16,7 @@
#ifndef AT91_RTC_H
#define AT91_RTC_H
#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
#define AT91_RTC_CR 0x00 /* Control Register */
#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
@ -29,44 +29,44 @@
#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
#define AT91_RTC_MR 0x04 /* Mode Register */
#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
#define AT91_RTC_TIMR 0x08 /* Time Register */
#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
#define AT91_RTC_CALR 0x0c /* Calendar Register */
#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
#define AT91_RTC_DAY (7 << 21) /* Current Day */
#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */
#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */
#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
#define AT91_RTC_SR 0x18 /* Status Register */
#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
#define AT91_RTC_SECEV (1 << 2) /* Second Event */
#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */
#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */
#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */
#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */
#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
#define AT91_RTC_VER 0x2c /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */

16
arch/arm/mach-at91/include/mach/at91_shdwc.h
View File

@ -16,11 +16,21 @@
#ifndef AT91_SHDWC_H
#define AT91_SHDWC_H
#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
#ifndef __ASSEMBLY__
extern void __iomem *at91_shdwc_base;
#define at91_shdwc_read(field) \
__raw_readl(at91_shdwc_base + field)
#define at91_shdwc_write(field, value) \
__raw_writel(value, at91_shdwc_base + field);
#endif
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */
#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
#define AT91_SHDW_WKMODE0_NONE 0
#define AT91_SHDW_WKMODE0_HIGH 1
@ -30,7 +40,7 @@
#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */

27
arch/arm/mach-at91/include/mach/at91cap9.h
View File

@ -79,29 +79,28 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
(0xfffffd50 - AT91_BASE_SYS) : \
(0xfffffd60 - AT91_BASE_SYS))
#define AT91CAP9_BASE_ECC 0xffffe200
#define AT91CAP9_BASE_DMA 0xffffec00
#define AT91CAP9_BASE_SMC 0xffffe800
#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1
#define AT91CAP9_BASE_PIOA 0xfffff200
#define AT91CAP9_BASE_PIOB 0xfffff400
#define AT91CAP9_BASE_PIOC 0xfffff600
#define AT91CAP9_BASE_PIOD 0xfffff800
#define AT91CAP9_BASE_SHDWC 0xfffffd10
#define AT91CAP9_BASE_RTT 0xfffffd20
#define AT91CAP9_BASE_PIT 0xfffffd30
#define AT91CAP9_BASE_WDT 0xfffffd40
#define AT91_USART0 AT91CAP9_BASE_US0
#define AT91_USART1 AT91CAP9_BASE_US1
#define AT91_USART2 AT91CAP9_BASE_US2

14
arch/arm/mach-at91/include/mach/at91rm9200.h
View File

@ -79,17 +79,17 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */
#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */
#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */
#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */
#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */
#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
#define AT91_USART0 AT91RM9200_BASE_US0
#define AT91_USART1 AT91RM9200_BASE_US1
#define AT91_USART2 AT91RM9200_BASE_US2

23
arch/arm/mach-at91/include/mach/at91sam9260.h
View File

@ -80,24 +80,23 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
#define AT91SAM9260_BASE_ECC 0xffffe800
#define AT91SAM9260_BASE_SMC 0xffffec00
#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0
#define AT91SAM9260_BASE_PIOA 0xfffff400
#define AT91SAM9260_BASE_PIOB 0xfffff600
#define AT91SAM9260_BASE_PIOC 0xfffff800
#define AT91SAM9260_BASE_SHDWC 0xfffffd10
#define AT91SAM9260_BASE_RTT 0xfffffd20
#define AT91SAM9260_BASE_PIT 0xfffffd30
#define AT91SAM9260_BASE_WDT 0xfffffd40
#define AT91_USART0 AT91SAM9260_BASE_US0
#define AT91_USART1 AT91SAM9260_BASE_US1
#define AT91_USART2 AT91SAM9260_BASE_US2

20
arch/arm/mach-at91/include/mach/at91sam9261.h
View File

@ -66,21 +66,21 @@
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
#define AT91SAM9261_BASE_SMC 0xffffec00
#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0
#define AT91SAM9261_BASE_PIOA 0xfffff400
#define AT91SAM9261_BASE_PIOB 0xfffff600
#define AT91SAM9261_BASE_PIOC 0xfffff800
#define AT91SAM9261_BASE_SHDWC 0xfffffd10
#define AT91SAM9261_BASE_RTT 0xfffffd20
#define AT91SAM9261_BASE_PIT 0xfffffd30
#define AT91SAM9261_BASE_WDT 0xfffffd40
#define AT91_USART0 AT91SAM9261_BASE_US0
#define AT91_USART1 AT91SAM9261_BASE_US1
#define AT91_USART2 AT91SAM9261_BASE_US2

33
arch/arm/mach-at91/include/mach/at91sam9263.h
View File

@ -74,30 +74,29 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
#define AT91SAM9263_BASE_ECC0 0xffffe000
#define AT91SAM9263_BASE_SMC0 0xffffe400
#define AT91SAM9263_BASE_ECC1 0xffffe600
#define AT91SAM9263_BASE_SMC1 0xffffea00
#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1
#define AT91SAM9263_BASE_PIOA 0xfffff200
#define AT91SAM9263_BASE_PIOB 0xfffff400
#define AT91SAM9263_BASE_PIOC 0xfffff600
#define AT91SAM9263_BASE_PIOD 0xfffff800
#define AT91SAM9263_BASE_PIOE 0xfffffa00
#define AT91SAM9263_BASE_SHDWC 0xfffffd10
#define AT91SAM9263_BASE_RTT0 0xfffffd20
#define AT91SAM9263_BASE_PIT 0xfffffd30
#define AT91SAM9263_BASE_WDT 0xfffffd40
#define AT91SAM9263_BASE_RTT1 0xfffffd50
#define AT91_USART0 AT91SAM9263_BASE_US0
#define AT91_USART1 AT91SAM9263_BASE_US1
#define AT91_USART2 AT91SAM9263_BASE_US2

17
arch/arm/mach-at91/include/mach/at91sam9_smc.h
View File

@ -16,7 +16,9 @@
#ifndef AT91SAM9_SMC_H
#define AT91SAM9_SMC_H
#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
#include <mach/cpu.h>
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
@ -26,7 +28,7 @@
#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */
#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
@ -36,13 +38,13 @@
#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */
#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */
#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
@ -66,11 +68,4 @@
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
#endif
#endif

30
arch/arm/mach-at91/include/mach/at91sam9g45.h
View File

@ -86,27 +86,27 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS)
#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS)
#define AT91SAM9G45_BASE_ECC 0xffffe200
#define AT91SAM9G45_BASE_DMA 0xffffec00
#define AT91SAM9G45_BASE_SMC 0xffffe800
#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1
#define AT91SAM9G45_BASE_PIOA 0xfffff200
#define AT91SAM9G45_BASE_PIOB 0xfffff400
#define AT91SAM9G45_BASE_PIOC 0xfffff600
#define AT91SAM9G45_BASE_PIOD 0xfffff800
#define AT91SAM9G45_BASE_PIOE 0xfffffa00
#define AT91SAM9G45_BASE_SHDWC 0xfffffd10
#define AT91SAM9G45_BASE_RTT 0xfffffd20
#define AT91SAM9G45_BASE_PIT 0xfffffd30
#define AT91SAM9G45_BASE_WDT 0xfffffd40
#define AT91SAM9G45_BASE_RTC 0xfffffdb0
#define AT91_USART0 AT91SAM9G45_BASE_US0
#define AT91_USART1 AT91SAM9G45_BASE_US1

29
arch/arm/mach-at91/include/mach/at91sam9rl.h
View File

@ -69,27 +69,26 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
#define AT91SAM9RL_BASE_DMA 0xffffe600
#define AT91SAM9RL_BASE_ECC 0xffffe800
#define AT91SAM9RL_BASE_SMC 0xffffec00
#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0
#define AT91SAM9RL_BASE_PIOA 0xfffff400
#define AT91SAM9RL_BASE_PIOB 0xfffff600
#define AT91SAM9RL_BASE_PIOC 0xfffff800
#define AT91SAM9RL_BASE_PIOD 0xfffffa00
#define AT91SAM9RL_BASE_SHDWC 0xfffffd10
#define AT91SAM9RL_BASE_RTT 0xfffffd20
#define AT91SAM9RL_BASE_PIT 0xfffffd30
#define AT91SAM9RL_BASE_WDT 0xfffffd40
#define AT91SAM9RL_BASE_RTC 0xfffffe00
#define AT91_USART0 AT91SAM9RL_BASE_US0
#define AT91_USART1 AT91SAM9RL_BASE_US1

1
arch/arm/mach-at91/include/mach/at91x40.h
View File

@ -40,7 +40,6 @@
#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.

42
arch/arm/mach-at91/include/mach/board.h
View File

@ -40,13 +40,14 @@
#include <linux/atmel-mci.h>
#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
/* USB Device */
struct at91_udc_data {
u8 vbus_pin; /* high == host powering us */
int vbus_pin; /* high == host powering us */
u8 vbus_active_low; /* vbus polarity */
u8 vbus_polled; /* Use polling, not interrupt */
u8 pullup_pin; /* active == D+ pulled up */
int pullup_pin; /* active == D+ pulled up */
u8 pullup_active_low; /* true == pullup_pin is active low */
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
@ -56,10 +57,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data);
/* Compact Flash */
struct at91_cf_data {
u8 irq_pin; /* I/O IRQ */
u8 det_pin; /* Card detect */
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
int irq_pin; /* I/O IRQ */
int det_pin; /* Card detect */
int vcc_pin; /* power switching */
int rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
u8 flags;
#define AT91_CF_TRUE_IDE 0x01
@ -70,37 +71,26 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
/* at91_mci platform config */
struct at91_mmc_data {
u8 det_pin; /* card detect IRQ */
int det_pin; /* card detect IRQ */
unsigned slot_b:1; /* uses Slot B */
unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
u8 wp_pin; /* (SD) writeprotect detect */
u8 vcc_pin; /* power switching (high == on) */
int wp_pin; /* (SD) writeprotect detect */
int vcc_pin; /* power switching (high == on) */
};
extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
/* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
/* Ethernet (EMAC & MACB) */
struct at91_eth_data {
u32 phy_mask;
u8 phy_irq_pin; /* PHY IRQ */
u8 is_rmii; /* using RMII interface? */
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
|| defined(CONFIG_ARCH_AT91SAM9G45)
#define eth_platform_data at91_eth_data
#endif
extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
u8 vbus_pin[2]; /* port power-control pin */
int vbus_pin[2]; /* port power-control pin */
u8 vbus_pin_inverted;
u8 overcurrent_supported;
u8 overcurrent_pin[2];
int overcurrent_pin[2];
u8 overcurrent_status[2];
u8 overcurrent_changed[2];
};
@ -110,9 +100,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
u8 enable_pin; /* chip enable */
u8 det_pin; /* card detect */
u8 rdy_pin; /* ready/busy */
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */

10
arch/arm/mach-at91/include/mach/debug-macro.S
View File

@ -14,9 +14,15 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
#define AT91_DBGU AT91_BASE_DBGU0
#else
#define AT91_DBGU AT91_BASE_DBGU1
#endif
.macro addruart, rp, rv, tmp
ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
ldr \rp, =AT91_DBGU @ System peripherals (phys address)
ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address)
.endm
.macro senduart,rd,rx

11
arch/arm/mach-at91/include/mach/entry-macro.S
View File

@ -17,16 +17,17 @@
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
.endm

328
arch/arm/mach-at91/include/mach/gpio.h
View File

@ -16,177 +16,175 @@
#include <linux/kernel.h>
#include <asm/irq.h>
#define PIN_BASE NR_AIC_IRQS
#define MAX_GPIO_BANKS 5
#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32))
#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
#define AT91_PIN_PA0 (0x00 + 0)
#define AT91_PIN_PA1 (0x00 + 1)
#define AT91_PIN_PA2 (0x00 + 2)
#define AT91_PIN_PA3 (0x00 + 3)
#define AT91_PIN_PA4 (0x00 + 4)
#define AT91_PIN_PA5 (0x00 + 5)
#define AT91_PIN_PA6 (0x00 + 6)
#define AT91_PIN_PA7 (0x00 + 7)
#define AT91_PIN_PA8 (0x00 + 8)
#define AT91_PIN_PA9 (0x00 + 9)
#define AT91_PIN_PA10 (0x00 + 10)
#define AT91_PIN_PA11 (0x00 + 11)
#define AT91_PIN_PA12 (0x00 + 12)
#define AT91_PIN_PA13 (0x00 + 13)
#define AT91_PIN_PA14 (0x00 + 14)
#define AT91_PIN_PA15 (0x00 + 15)
#define AT91_PIN_PA16 (0x00 + 16)
#define AT91_PIN_PA17 (0x00 + 17)
#define AT91_PIN_PA18 (0x00 + 18)
#define AT91_PIN_PA19 (0x00 + 19)
#define AT91_PIN_PA20 (0x00 + 20)
#define AT91_PIN_PA21 (0x00 + 21)
#define AT91_PIN_PA22 (0x00 + 22)
#define AT91_PIN_PA23 (0x00 + 23)
#define AT91_PIN_PA24 (0x00 + 24)
#define AT91_PIN_PA25 (0x00 + 25)
#define AT91_PIN_PA26 (0x00 + 26)
#define AT91_PIN_PA27 (0x00 + 27)
#define AT91_PIN_PA28 (0x00 + 28)
#define AT91_PIN_PA29 (0x00 + 29)
#define AT91_PIN_PA30 (0x00 + 30)
#define AT91_PIN_PA31 (0x00 + 31)
#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
#define AT91_PIN_PB0 (0x20 + 0)
#define AT91_PIN_PB1 (0x20 + 1)
#define AT91_PIN_PB2 (0x20 + 2)
#define AT91_PIN_PB3 (0x20 + 3)
#define AT91_PIN_PB4 (0x20 + 4)
#define AT91_PIN_PB5 (0x20 + 5)
#define AT91_PIN_PB6 (0x20 + 6)
#define AT91_PIN_PB7 (0x20 + 7)
#define AT91_PIN_PB8 (0x20 + 8)
#define AT91_PIN_PB9 (0x20 + 9)
#define AT91_PIN_PB10 (0x20 + 10)
#define AT91_PIN_PB11 (0x20 + 11)
#define AT91_PIN_PB12 (0x20 + 12)
#define AT91_PIN_PB13 (0x20 + 13)
#define AT91_PIN_PB14 (0x20 + 14)
#define AT91_PIN_PB15 (0x20 + 15)
#define AT91_PIN_PB16 (0x20 + 16)
#define AT91_PIN_PB17 (0x20 + 17)
#define AT91_PIN_PB18 (0x20 + 18)
#define AT91_PIN_PB19 (0x20 + 19)
#define AT91_PIN_PB20 (0x20 + 20)
#define AT91_PIN_PB21 (0x20 + 21)
#define AT91_PIN_PB22 (0x20 + 22)
#define AT91_PIN_PB23 (0x20 + 23)
#define AT91_PIN_PB24 (0x20 + 24)
#define AT91_PIN_PB25 (0x20 + 25)
#define AT91_PIN_PB26 (0x20 + 26)
#define AT91_PIN_PB27 (0x20 + 27)
#define AT91_PIN_PB28 (0x20 + 28)
#define AT91_PIN_PB29 (0x20 + 29)
#define AT91_PIN_PB30 (0x20 + 30)
#define AT91_PIN_PB31 (0x20 + 31)
#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
#define AT91_PIN_PC0 (0x40 + 0)
#define AT91_PIN_PC1 (0x40 + 1)
#define AT91_PIN_PC2 (0x40 + 2)
#define AT91_PIN_PC3 (0x40 + 3)
#define AT91_PIN_PC4 (0x40 + 4)
#define AT91_PIN_PC5 (0x40 + 5)
#define AT91_PIN_PC6 (0x40 + 6)
#define AT91_PIN_PC7 (0x40 + 7)
#define AT91_PIN_PC8 (0x40 + 8)
#define AT91_PIN_PC9 (0x40 + 9)
#define AT91_PIN_PC10 (0x40 + 10)
#define AT91_PIN_PC11 (0x40 + 11)
#define AT91_PIN_PC12 (0x40 + 12)
#define AT91_PIN_PC13 (0x40 + 13)
#define AT91_PIN_PC14 (0x40 + 14)
#define AT91_PIN_PC15 (0x40 + 15)
#define AT91_PIN_PC16 (0x40 + 16)
#define AT91_PIN_PC17 (0x40 + 17)
#define AT91_PIN_PC18 (0x40 + 18)
#define AT91_PIN_PC19 (0x40 + 19)
#define AT91_PIN_PC20 (0x40 + 20)
#define AT91_PIN_PC21 (0x40 + 21)
#define AT91_PIN_PC22 (0x40 + 22)
#define AT91_PIN_PC23 (0x40 + 23)
#define AT91_PIN_PC24 (0x40 + 24)
#define AT91_PIN_PC25 (0x40 + 25)
#define AT91_PIN_PC26 (0x40 + 26)
#define AT91_PIN_PC27 (0x40 + 27)
#define AT91_PIN_PC28 (0x40 + 28)
#define AT91_PIN_PC29 (0x40 + 29)
#define AT91_PIN_PC30 (0x40 + 30)
#define AT91_PIN_PC31 (0x40 + 31)
#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
#define AT91_PIN_PD0 (0x60 + 0)
#define AT91_PIN_PD1 (0x60 + 1)
#define AT91_PIN_PD2 (0x60 + 2)
#define AT91_PIN_PD3 (0x60 + 3)
#define AT91_PIN_PD4 (0x60 + 4)
#define AT91_PIN_PD5 (0x60 + 5)
#define AT91_PIN_PD6 (0x60 + 6)
#define AT91_PIN_PD7 (0x60 + 7)
#define AT91_PIN_PD8 (0x60 + 8)
#define AT91_PIN_PD9 (0x60 + 9)
#define AT91_PIN_PD10 (0x60 + 10)
#define AT91_PIN_PD11 (0x60 + 11)
#define AT91_PIN_PD12 (0x60 + 12)
#define AT91_PIN_PD13 (0x60 + 13)
#define AT91_PIN_PD14 (0x60 + 14)
#define AT91_PIN_PD15 (0x60 + 15)
#define AT91_PIN_PD16 (0x60 + 16)
#define AT91_PIN_PD17 (0x60 + 17)
#define AT91_PIN_PD18 (0x60 + 18)
#define AT91_PIN_PD19 (0x60 + 19)
#define AT91_PIN_PD20 (0x60 + 20)
#define AT91_PIN_PD21 (0x60 + 21)
#define AT91_PIN_PD22 (0x60 + 22)
#define AT91_PIN_PD23 (0x60 + 23)
#define AT91_PIN_PD24 (0x60 + 24)
#define AT91_PIN_PD25 (0x60 + 25)
#define AT91_PIN_PD26 (0x60 + 26)
#define AT91_PIN_PD27 (0x60 + 27)
#define AT91_PIN_PD28 (0x60 + 28)
#define AT91_PIN_PD29 (0x60 + 29)
#define AT91_PIN_PD30 (0x60 + 30)
#define AT91_PIN_PD31 (0x60 + 31)
#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
#define AT91_PIN_PE0 (0x80 + 0)
#define AT91_PIN_PE1 (0x80 + 1)
#define AT91_PIN_PE2 (0x80 + 2)
#define AT91_PIN_PE3 (0x80 + 3)
#define AT91_PIN_PE4 (0x80 + 4)
#define AT91_PIN_PE5 (0x80 + 5)
#define AT91_PIN_PE6 (0x80 + 6)
#define AT91_PIN_PE7 (0x80 + 7)
#define AT91_PIN_PE8 (0x80 + 8)
#define AT91_PIN_PE9 (0x80 + 9)
#define AT91_PIN_PE10 (0x80 + 10)
#define AT91_PIN_PE11 (0x80 + 11)
#define AT91_PIN_PE12 (0x80 + 12)
#define AT91_PIN_PE13 (0x80 + 13)
#define AT91_PIN_PE14 (0x80 + 14)
#define AT91_PIN_PE15 (0x80 + 15)
#define AT91_PIN_PE16 (0x80 + 16)
#define AT91_PIN_PE17 (0x80 + 17)
#define AT91_PIN_PE18 (0x80 + 18)
#define AT91_PIN_PE19 (0x80 + 19)
#define AT91_PIN_PE20 (0x80 + 20)
#define AT91_PIN_PE21 (0x80 + 21)
#define AT91_PIN_PE22 (0x80 + 22)
#define AT91_PIN_PE23 (0x80 + 23)
#define AT91_PIN_PE24 (0x80 + 24)
#define AT91_PIN_PE25 (0x80 + 25)
#define AT91_PIN_PE26 (0x80 + 26)
#define AT91_PIN_PE27 (0x80 + 27)
#define AT91_PIN_PE28 (0x80 + 28)
#define AT91_PIN_PE29 (0x80 + 29)
#define AT91_PIN_PE30 (0x80 + 30)
#define AT91_PIN_PE31 (0x80 + 31)
#ifndef __ASSEMBLY__
/* setup setup routines, called from board init or driver probe() */
@ -215,8 +213,8 @@ extern void at91_gpio_resume(void);
#include <asm/errno.h>
#define gpio_to_irq(gpio) (gpio)
#define irq_to_gpio(irq) (irq)
#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS)
#define irq_to_gpio(irq) (irq - NR_AIC_IRQS)
#endif /* __ASSEMBLY__ */

12
arch/arm/mach-at91/include/mach/hardware.h
View File

@ -16,6 +16,12 @@
#include <asm/sizes.h>
/* DBGU base */
/* rm9200, 9260/9g20, 9261/9g10, 9rl */
#define AT91_BASE_DBGU0 0xfffff200
/* 9263, 9g45, cap9 */
#define AT91_BASE_DBGU1 0xffffee00
#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
@ -51,6 +57,12 @@
#define AT91_BASE_SYS 0xffffc000
#endif
/*
* On all at91 have the Advanced Interrupt Controller starts at address
* 0xfffff000
*/
#define AT91_AIC 0xfffff000
/*
* Peripheral identifiers/interrupts.
*/

2
arch/arm/mach-at91/include/mach/irqs.h
View File

@ -31,7 +31,7 @@
* Acknowledge interrupt with AIC after interrupt has been handled.
* (by kernel/irq.c)
*/
#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
/*

67
arch/arm/mach-at91/include/mach/timex.h
View File

@ -23,70 +23,15 @@
#include <mach/hardware.h>
#if defined(CONFIG_ARCH_AT91RM9200)
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
#elif defined(CONFIG_ARCH_AT91SAM9260)
#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
#define AT91SAM9_MASTER_CLOCK 90000000
#else
#define AT91SAM9_MASTER_CLOCK 99300000
#endif
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9261)
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G10)
#define AT91SAM9_MASTER_CLOCK 133000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9263)
#if defined(CONFIG_MACH_USB_A9263)
#define AT91SAM9_MASTER_CLOCK 90000000
#else
#define AT91SAM9_MASTER_CLOCK 99959500
#endif
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#define AT91SAM9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G20)
#if defined(CONFIG_MACH_USB_A9G20)
#define AT91SAM9_MASTER_CLOCK 133000000
#else
#define AT91SAM9_MASTER_CLOCK 132096000
#endif
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#define AT91SAM9_MASTER_CLOCK 133333333
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91CAP9)
#define AT91CAP9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91X40)
#ifdef CONFIG_ARCH_AT91X40
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
#endif
#else
#define CLOCK_TICK_RATE 12345678
#endif
#endif /* __ASM_ARCH_TIMEX_H */

6
arch/arm/mach-at91/include/mach/uncompress.h
View File

@ -24,8 +24,10 @@
#include <linux/io.h>
#include <linux/atmel_serial.h>
#if defined(CONFIG_AT91_EARLY_DBGU)
#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
#if defined(CONFIG_AT91_EARLY_DBGU0)
#define UART_OFFSET AT91_BASE_DBGU0
#elif defined(CONFIG_AT91_EARLY_DBGU1)
#define UART_OFFSET AT91_BASE_DBGU1
#elif defined(CONFIG_AT91_EARLY_USART0)
#define UART_OFFSET AT91_USART0
#elif defined(CONFIG_AT91_EARLY_USART1)

38
arch/arm/mach-at91/irq.c
View File

@ -33,17 +33,18 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
void __iomem *at91_aic_base;
static void at91_aic_mask_irq(struct irq_data *d)
{
/* Disable interrupt on AIC */
at91_sys_write(AT91_AIC_IDCR, 1 << d->irq);
at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
}
static void at91_aic_unmask_irq(struct irq_data *d)
{
/* Enable interrupt on AIC */
at91_sys_write(AT91_AIC_IECR, 1 << d->irq);
at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
}
unsigned int at91_extern_irq;
@ -77,8 +78,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
return -EINVAL;
}
smr = at91_sys_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
at91_sys_write(AT91_AIC_SMR(d->irq), smr | srctype);
smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
return 0;
}
@ -102,15 +103,15 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
void at91_irq_suspend(void)
{
backups = at91_sys_read(AT91_AIC_IMR);
at91_sys_write(AT91_AIC_IDCR, backups);
at91_sys_write(AT91_AIC_IECR, wakeups);
backups = at91_aic_read(AT91_AIC_IMR);
at91_aic_write(AT91_AIC_IDCR, backups);
at91_aic_write(AT91_AIC_IECR, wakeups);
}
void at91_irq_resume(void)
{
at91_sys_write(AT91_AIC_IDCR, wakeups);
at91_sys_write(AT91_AIC_IECR, backups);
at91_aic_write(AT91_AIC_IDCR, wakeups);
at91_aic_write(AT91_AIC_IECR, backups);
}
#else
@ -133,34 +134,39 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
{
unsigned int i;
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Impossible to ioremap AT91_AIC\n");
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
for (i = 0; i < NR_AIC_IRQS; i++) {
/* Put irq number in Source Vector Register: */
at91_sys_write(AT91_AIC_SVR(i), i);
at91_aic_write(AT91_AIC_SVR(i), i);
/* Active Low interrupt, with the specified priority */
at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
if (i < 8)
at91_sys_write(AT91_AIC_EOICR, 0);
at91_aic_write(AT91_AIC_EOICR, 0);
}
/*
* Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
* When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
*/
at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS);
/* No debugging in AIC: Debug (Protect) Control Register */
at91_sys_write(AT91_AIC_DCR, 0);
at91_aic_write(AT91_AIC_DCR, 0);
/* Disable and clear all interrupts initially */
at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
}

11
arch/arm/mach-at91/pm.c
View File

@ -34,7 +34,7 @@
/*
* Show the reason for the previous system reset.
*/
#if defined(AT91_SHDWC)
#if defined(AT91_RSTC)
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
@ -58,8 +58,11 @@ static void __init show_reset_status(void)
char *reason, *r2 = reset;
u32 reset_type, wake_type;
if (!at91_shdwc_base)
return;
reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
wake_type = at91_sys_read(AT91_SHDW_SR);
wake_type = at91_shdwc_read(AT91_SHDW_SR);
switch (reset_type) {
case AT91_RSTC_RSTTYP_GENERAL:
@ -215,7 +218,7 @@ static int at91_pm_enter(suspend_state_t state)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
| (at91_extern_irq))
& at91_sys_read(AT91_AIC_IMR),
& at91_aic_read(AT91_AIC_IMR),
state);
switch (state) {
@ -283,7 +286,7 @@ static int at91_pm_enter(suspend_state_t state)
}
pr_debug("AT91: PM - wakeup %08x\n",
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR));
error:
target_state = PM_SUSPEND_ON;

62
arch/arm/mach-at91/sam9_smc.c
View File

@ -10,38 +10,58 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
void __init sam9_smc_configure(int cs, struct sam9_smc_config* config)
#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10))
static void __iomem *smc_base_addr[2];
static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
{
/* Setup register */
at91_sys_write(AT91_SMC_SETUP(cs),
AT91_SMC_NWESETUP_(config->nwe_setup)
| AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
| AT91_SMC_NRDSETUP_(config->nrd_setup)
| AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup)
);
__raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
| AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
| AT91_SMC_NRDSETUP_(config->nrd_setup)
| AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
base + AT91_SMC_SETUP);
/* Pulse register */
at91_sys_write(AT91_SMC_PULSE(cs),
AT91_SMC_NWEPULSE_(config->nwe_pulse)
| AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
| AT91_SMC_NRDPULSE_(config->nrd_pulse)
| AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse)
);
__raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
| AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
| AT91_SMC_NRDPULSE_(config->nrd_pulse)
| AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
base + AT91_SMC_PULSE);
/* Cycle register */
at91_sys_write(AT91_SMC_CYCLE(cs),
AT91_SMC_NWECYCLE_(config->write_cycle)
| AT91_SMC_NRDCYCLE_(config->read_cycle)
);
__raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
| AT91_SMC_NRDCYCLE_(config->read_cycle),
base + AT91_SMC_CYCLE);
/* Mode register */
at91_sys_write(AT91_SMC_MODE(cs),
config->mode
| AT91_SMC_TDF_(config->tdf_cycles)
);
__raw_writel(config->mode
| AT91_SMC_TDF_(config->tdf_cycles),
base + AT91_SMC_MODE);
}
void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
void __init at91sam9_ioremap_smc(int id, u32 addr)
{
if (id > 1) {
pr_warn("%s: id > 2\n", __func__);
return;
}
smc_base_addr[id] = ioremap(addr, 512);
if (!smc_base_addr[id])
pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
}

3
arch/arm/mach-at91/sam9_smc.h
View File

@ -30,4 +30,5 @@ struct sam9_smc_config {
u8 tdf_cycles:4;
};
extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config);
extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
extern void __init at91sam9_ioremap_smc(int id, u32 addr);

26
arch/arm/mach-at91/setup.c
View File

@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <asm/mach/map.h>
@ -15,6 +16,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
@ -73,9 +75,6 @@ static struct map_desc at91_io_desc __initdata = {
.type = MT_DEVICE,
};
#define AT91_DBGU0 0xfffff200
#define AT91_DBGU1 0xffffee00
static void __init soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
@ -248,9 +247,9 @@ void __init at91_map_io(void)
at91_soc_initdata.type = AT91_SOC_NONE;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
soc_detect(AT91_DBGU0);
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
soc_detect(AT91_DBGU1);
soc_detect(AT91_BASE_DBGU1);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
@ -267,8 +266,25 @@ void __init at91_map_io(void)
at91_boot_soc.map_io();
}
void __iomem *at91_shdwc_base = NULL;
static void at91sam9_poweroff(void)
{
at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
}
void __init at91_ioremap_shdwc(u32 base_addr)
{
at91_shdwc_base = ioremap(base_addr, 16);
if (!at91_shdwc_base)
panic("Impossible to ioremap at91_shdwc_base\n");
pm_power_off = at91sam9_poweroff;
}
void __init at91_initialize(unsigned long main_clock)
{
at91_boot_soc.ioremap_registers();
/* Init clock subsystem */
at91_clock_init(main_clock);

1
arch/arm/mach-at91/soc.h
View File

@ -7,6 +7,7 @@
struct at91_init_soc {
unsigned int *default_irq_priority;
void (*map_io)(void);
void (*ioremap_registers)(void);
void (*register_clocks)(void);
void (*init)(void);
};

53
arch/arm/mach-davinci/include/mach/dm646x.h
View File

@ -16,6 +16,7 @@
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/davinci_emac.h>
#include <media/davinci/vpif_types.h>
#define DM646X_EMAC_BASE (0x01C80000)
#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
@ -34,58 +35,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv);
void dm646x_video_init(void);
enum vpif_if_type {
VPIF_IF_BT656,
VPIF_IF_BT1120,
VPIF_IF_RAW_BAYER
};
struct vpif_interface {
enum vpif_if_type if_type;
unsigned hd_pol:1;
unsigned vd_pol:1;
unsigned fid_pol:1;
};
struct vpif_subdev_info {
const char *name;
struct i2c_board_info board_info;
u32 input;
u32 output;
unsigned can_route:1;
struct vpif_interface vpif_if;
};
struct vpif_display_config {
int (*set_clock)(int, int);
struct vpif_subdev_info *subdevinfo;
int subdev_count;
const char **output;
int output_count;
const char *card_name;
};
struct vpif_input {
struct v4l2_input input;
const char *subdev_name;
};
#define VPIF_CAPTURE_MAX_CHANNELS 2
struct vpif_capture_chan_config {
const struct vpif_input *inputs;
int input_count;
};
struct vpif_capture_config {
int (*setup_input_channel_mode)(int);
int (*setup_input_path)(int, const char *);
struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
struct vpif_subdev_info *subdev_info;
int subdev_count;
const char *card_name;
};
void dm646x_setup_vpif(struct vpif_display_config *,
struct vpif_capture_config *);

20
arch/arm/mach-exynos/common.c
View File

@ -19,6 +19,7 @@
#include <linux/serial_core.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@ -43,8 +44,6 @@
#include "common.h"
unsigned int gic_bank_offset __read_mostly;
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
@ -386,27 +385,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
}
}
static void exynos4_gic_irq_fix_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
gic_data->cpu_base = S5P_VA_GIC_CPU +
(gic_bank_offset * smp_processor_id());
gic_data->dist_base = S5P_VA_GIC_DIST +
(gic_bank_offset * smp_processor_id());
}
void __init exynos4_init_irq(void)
{
int irq;
unsigned int gic_bank_offset;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {

35
arch/arm/mach-msm/Kconfig
View File

@ -13,7 +13,6 @@ config ARCH_MSM7X00A
select CPU_V6
select GPIO_MSM_V1
select MSM_PROC_COMM
select HAS_MSM_DEBUG_UART_PHYS
config ARCH_MSM7X30
bool "MSM7x30"
@ -25,7 +24,6 @@ config ARCH_MSM7X30
select MSM_GPIOMUX
select GPIO_MSM_V1
select MSM_PROC_COMM
select HAS_MSM_DEBUG_UART_PHYS
config ARCH_QSD8X50
bool "QSD8X50"
@ -37,7 +35,6 @@ config ARCH_QSD8X50
select MSM_GPIOMUX
select GPIO_MSM_V1
select MSM_PROC_COMM
select HAS_MSM_DEBUG_UART_PHYS
config ARCH_MSM8X60
bool "MSM8X60"
@ -63,6 +60,9 @@ config ARCH_MSM8960
endchoice
config MSM_HAS_DEBUG_UART_HS
bool
config MSM_SOC_REV_A
bool
config ARCH_MSM_SCORPIONMP
@ -74,9 +74,6 @@ config ARCH_MSM_ARM11
config ARCH_MSM_SCORPION
bool
config HAS_MSM_DEBUG_UART_PHYS
bool
config MSM_VIC
bool
@ -153,32 +150,6 @@ config MACH_MSM8960_RUMI3
endmenu
config MSM_DEBUG_UART
int
default 1 if MSM_DEBUG_UART1
default 2 if MSM_DEBUG_UART2
default 3 if MSM_DEBUG_UART3
if HAS_MSM_DEBUG_UART_PHYS
choice
prompt "Debug UART"
default MSM_DEBUG_UART_NONE
config MSM_DEBUG_UART_NONE
bool "None"
config MSM_DEBUG_UART1
bool "UART1"
config MSM_DEBUG_UART2
bool "UART2"
config MSM_DEBUG_UART3
bool "UART3"
endchoice
endif
config MSM_SMD_PKG3
bool

53
arch/arm/mach-msm/include/mach/debug-macro.S
View File

@ -1,6 +1,7 @@
/* arch/arm/mach-msm7200/include/mach/debug-macro.S
/*
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
@ -14,40 +15,52 @@
*
*/
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
.macro addruart, rp, rv, tmp
#ifdef MSM_DEBUG_UART_PHYS
ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE
#endif
.endm
.macro senduart,rd,rx
.macro senduart, rd, rx
#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
#else
teq \rx, #0
strne \rd, [\rx, #0x0C]
#endif
.endm
.macro waituart,rd,rx
.macro waituart, rd, rx
#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
tst \rd, #0x08
bne 1002f
@ wait for TXREADY in UARTDM_ISR
1001: ldr \rd, [\rx, #0x14]
tst \rd, #0x80
beq 1001b
1002:
@ Clear TX_READY by writing to the UARTDM_CR register
mov \rd, #0x300
str \rd, [\rx, #0x10]
@ Write 0x1 to NCF register
mov \rd, #0x1
str \rd, [\rx, #0x40]
@ UARTDM reg. Read to induce delay
ldr \rd, [\rx, #0x08]
#else
@ wait for TX_READY
1001: ldr \rd, [\rx, #0x08]
tst \rd, #0x04
beq 1001b
.endm
#else
.macro addruart, rp, rv, tmp
mov \rv, #0xff000000
orr \rv, \rv, #0x00f00000
.endm
.macro senduart,rd,rx
.endm
.macro waituart,rd,rx
.endm
#endif
.macro busyuart,rd,rx
.endm
.macro busyuart, rd, rx
.endm

12
arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
View File

@ -78,18 +78,6 @@
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
#ifdef CONFIG_MSM_DEBUG_UART
#define MSM_DEBUG_UART_BASE 0xE1000000
#if CONFIG_MSM_DEBUG_UART == 1
#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
#elif CONFIG_MSM_DEBUG_UART == 2
#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
#elif CONFIG_MSM_DEBUG_UART == 3
#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
#endif
#define MSM_DEBUG_UART_SIZE SZ_4K
#endif
#define MSM_SDC1_PHYS 0xA0400000
#define MSM_SDC1_SIZE SZ_4K

12
arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
View File

@ -89,18 +89,6 @@
#define MSM_UART3_PHYS 0xACC00000
#define MSM_UART3_SIZE SZ_4K
#ifdef CONFIG_MSM_DEBUG_UART
#define MSM_DEBUG_UART_BASE 0xE1000000
#if CONFIG_MSM_DEBUG_UART == 1
#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
#elif CONFIG_MSM_DEBUG_UART == 2
#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
#elif CONFIG_MSM_DEBUG_UART == 3
#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
#endif
#define MSM_DEBUG_UART_SIZE SZ_4K
#endif
#define MSM_MDC_BASE IOMEM(0xE0200000)
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M

5
arch/arm/mach-msm/include/mach/msm_iomap-8960.h
View File

@ -45,4 +45,9 @@
#define MSM8960_TMR0_PHYS 0x0208A000
#define MSM8960_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8960_UART
#define MSM_DEBUG_UART_BASE 0xE1040000
#define MSM_DEBUG_UART_PHYS 0x16440000
#endif
#endif

12
arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
View File

@ -83,18 +83,6 @@
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
#ifdef CONFIG_MSM_DEBUG_UART
#define MSM_DEBUG_UART_BASE 0xE1000000
#if CONFIG_MSM_DEBUG_UART == 1
#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
#elif CONFIG_MSM_DEBUG_UART == 2
#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
#elif CONFIG_MSM_DEBUG_UART == 3
#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
#endif
#define MSM_DEBUG_UART_SIZE SZ_4K
#endif
#define MSM_MDC_BASE IOMEM(0xE0200000)
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M

5
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
View File

@ -62,4 +62,9 @@
#define MSM8X60_TMR0_PHYS 0x02040000
#define MSM8X60_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8660_UART
#define MSM_DEBUG_UART_BASE 0xE1040000
#define MSM_DEBUG_UART_PHYS 0x19C40000
#endif
#endif

12
arch/arm/mach-msm/include/mach/msm_iomap.h
View File

@ -55,6 +55,18 @@
#include "msm_iomap-8960.h"
#define MSM_DEBUG_UART_SIZE SZ_4K
#if defined(CONFIG_DEBUG_MSM_UART1)
#define MSM_DEBUG_UART_BASE 0xE1000000
#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
#elif defined(CONFIG_DEBUG_MSM_UART2)
#define MSM_DEBUG_UART_BASE 0xE1000000
#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
#elif defined(CONFIG_DEBUG_MSM_UART3)
#define MSM_DEBUG_UART_BASE 0xE1000000
#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
#endif
/* Virtual addresses shared across all MSM targets. */
#define MSM_CSR_BASE IOMEM(0xE0001000)
#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000)

39
arch/arm/mach-msm/include/mach/uncompress.h
View File

@ -1,6 +1,6 @@
/* arch/arm/mach-msm/include/mach/uncompress.h
*
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@ -14,17 +14,40 @@
*/
#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
#define __ASM_ARCH_MSM_UNCOMPRESS_H
#include "hardware.h"
#include "linux/io.h"
#include "mach/msm_iomap.h"
#include <asm/processor.h>
#include <mach/msm_iomap.h>
#define UART_CSR (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
#define UART_TF (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
#define UART_DM_SR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
#define UART_DM_CR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
#define UART_DM_ISR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
#define UART_DM_TF (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
static void putc(int c)
{
#if defined(MSM_DEBUG_UART_PHYS)
unsigned base = MSM_DEBUG_UART_PHYS;
while (!(readl(base + 0x08) & 0x04)) ;
writel(c, base + 0x0c);
#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
/*
* Wait for TX_READY to be set; but skip it if we have a
* TX underrun.
*/
if (UART_DM_SR & 0x08)
while (!(UART_DM_ISR & 0x80))
cpu_relax();
UART_DM_CR = 0x300;
UART_DM_NCHAR = 0x1;
UART_DM_TF = c;
#else
while (!(UART_CSR & 0x04))
cpu_relax();
UART_TF = c;
#endif
#endif
}

15
arch/arm/mach-msm/io.c
View File

@ -47,7 +47,8 @@ static struct map_desc msm_io_desc[] __initdata = {
MSM_CHIP_DEVICE(GPIO1, MSM7X00),
MSM_CHIP_DEVICE(GPIO2, MSM7X00),
MSM_DEVICE(CLK_CTL),
#ifdef CONFIG_MSM_DEBUG_UART
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
#ifdef CONFIG_ARCH_MSM7X30
@ -84,7 +85,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
MSM_DEVICE(SCPLL),
MSM_DEVICE(AD5),
MSM_DEVICE(MDC),
#ifdef CONFIG_MSM_DEBUG_UART
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
{
@ -109,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
MSM_CHIP_DEVICE(TMR0, MSM8X60),
MSM_DEVICE(ACC),
MSM_DEVICE(GCC),
#ifdef CONFIG_DEBUG_MSM8660_UART
MSM_DEVICE(DEBUG_UART),
#endif
};
void __init msm_map_msm8x60_io(void)
@ -123,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
MSM_CHIP_DEVICE(TMR, MSM8960),
MSM_CHIP_DEVICE(TMR0, MSM8960),
#ifdef CONFIG_DEBUG_MSM8960_UART
MSM_DEVICE(DEBUG_UART),
#endif
};
void __init msm_map_msm8960_io(void)
@ -146,7 +154,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
MSM_DEVICE(SAW),
MSM_DEVICE(GCC),
MSM_DEVICE(TCSR),
#ifdef CONFIG_MSM_DEBUG_UART
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
{

2
arch/arm/mach-msm/platsmp.c
View File

@ -79,7 +79,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
SCM_FLAG_COLDBOOT_CPU1);
if (ret == 0) {
void *sc1_base_ptr;
void __iomem *sc1_base_ptr;
sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
if (sc1_base_ptr) {
writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);

Some files were not shown because too many files have changed in this diff Show More