From ad6493800b08791bd7ea1a578b8c8b14dfecec0d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 15 Apr 2017 15:16:50 -0700 Subject: [PATCH] Input: docs - freshen up introduction Stop saying that API is experimental and that only USB is supported, acknowledge that evdev is the preferred interface, and remove paragraph encouraging people sending snail mail to Vojtech :) along with his email. Signed-off-by: Dmitry Torokhov --- Documentation/input/event-codes.rst | 2 + Documentation/input/input.rst | 279 ++++++++++---------- Documentation/input/joydev/joystick-api.rst | 2 + Documentation/input/joydev/joystick.rst | 2 + 4 files changed, 140 insertions(+), 145 deletions(-) diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index 92db50954169..00b88f113bda 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst @@ -1,3 +1,5 @@ +.. _input-event-codes: + ================= Input event codes ================= diff --git a/Documentation/input/input.rst b/Documentation/input/input.rst index ac7669ad3e76..3b3a22975106 100644 --- a/Documentation/input/input.rst +++ b/Documentation/input/input.rst @@ -1,25 +1,20 @@ .. include:: -=================== -Linux Input drivers -=================== - -:Copyright: |copy| 1999-2001 Vojtech Pavlik - Sponsored by SuSE - -Should you need to contact me, the author, you can do so either by e-mail -- mail your message to , or by paper mail: Vojtech Pavlik, -Simunkova 1594, Prague 8, 182 00 Czech Republic - +============ Introduction ============ -This is a collection of drivers that is designed to support all input -devices under Linux. While it is currently used only on for USB input -devices, future use (say 2.5/2.6) is expected to expand to replace -most of the existing input system, which is why it lives in -drivers/input/ instead of drivers/usb/. +:Copyright: |copy| 1999-2001 Vojtech Pavlik - Sponsored by SuSE -The centre of the input drivers is the input module, which must be +Architecture +============ + +Input subsystem a collection of drivers that is designed to support +all input devices under Linux. Most of the drivers reside in +drivers/input, although quite a few live in drivers/hid and +drivers/platform. + +The core of the input subsystem is the input module, which must be loaded before any other of the input modules - it serves as a way of communication between two groups of modules: @@ -32,9 +27,9 @@ events (keystrokes, mouse movements) to the input module. Event handlers -------------- -These modules get events from input and pass them where needed via -various interfaces - keystrokes to the kernel, mouse movements via a -simulated PS/2 interface to GPM and X and so on. +These modules get events from input core and pass them where needed +via various interfaces - keystrokes to the kernel, mouse movements via +a simulated PS/2 interface to GPM and X, and so on. Simple Usage ============ @@ -45,19 +40,18 @@ kernel):: input mousedev - keybdev usbcore uhci_hcd or ohci_hcd or ehci_hcd usbhid + hid_generic After this, the USB keyboard will work straight away, and the USB mouse will be available as a character device on major 13, minor 63:: crw-r--r-- 1 root root 13, 63 Mar 28 22:45 mice -This device has to be created. - -The commands to create it by hand are:: +This device usually created automatically by the system. The commands +to create it by hand are:: cd /dev mkdir input @@ -81,19 +75,110 @@ When you do all of the above, you can use your USB mouse and keyboard. Detailed Description ==================== +Event handlers +-------------- + +Event handlers distribute the events from the devices to userspace and +in-kernel consumers, as needed. + +evdev +~~~~~ + +``evdev`` is the generic input event interface. It passes the events +generated in the kernel straight to the program, with timestamps. The +event codes are the same on all architectures and are hardware +independent. + +This is the preferred interface for userspace to consume user +input, and all clients are encouraged to use it. + +See :ref:`event-interface` for notes on API. + +The devices are in /dev/input:: + + crw-r--r-- 1 root root 13, 64 Apr 1 10:49 event0 + crw-r--r-- 1 root root 13, 65 Apr 1 10:50 event1 + crw-r--r-- 1 root root 13, 66 Apr 1 10:50 event2 + crw-r--r-- 1 root root 13, 67 Apr 1 10:50 event3 + ... + +There are two ranges of minors: 64 through 95 is the static legacy +range. If there are more than 32 input devices in a system, additional +evdev nodes are created with minors starting with 256. + +keyboard +~~~~~~~~ + +``keyboard`` is in-kernel input handler ad is a part of VT code. It +consumes keyboard keystrokes and handles user input for VT consoles. + +mousedev +~~~~~~~~ + +``mousedev`` is a hack to make legacy programs that use mouse input +work. It takes events from either mice or digitizers/tablets and makes +a PS/2-style (a la /dev/psaux) mouse device available to the +userland. + +Mousedev devices in /dev/input (as shown above) are:: + + crw-r--r-- 1 root root 13, 32 Mar 28 22:45 mouse0 + crw-r--r-- 1 root root 13, 33 Mar 29 00:41 mouse1 + crw-r--r-- 1 root root 13, 34 Mar 29 00:41 mouse2 + crw-r--r-- 1 root root 13, 35 Apr 1 10:50 mouse3 + ... + ... + crw-r--r-- 1 root root 13, 62 Apr 1 10:50 mouse30 + crw-r--r-- 1 root root 13, 63 Apr 1 10:50 mice + +Each ``mouse`` device is assigned to a single mouse or digitizer, except +the last one - ``mice``. This single character device is shared by all +mice and digitizers, and even if none are connected, the device is +present. This is useful for hotplugging USB mice, so that older programs +that do not handle hotplug can open the device even when no mice are +present. + +CONFIG_INPUT_MOUSEDEV_SCREEN_[XY] in the kernel configuration are +the size of your screen (in pixels) in XFree86. This is needed if you +want to use your digitizer in X, because its movement is sent to X +via a virtual PS/2 mouse and thus needs to be scaled +accordingly. These values won't be used if you use a mouse only. + +Mousedev will generate either PS/2, ImPS/2 (Microsoft IntelliMouse) or +ExplorerPS/2 (IntelliMouse Explorer) protocols, depending on what the +program reading the data wishes. You can set GPM and X to any of +these. You'll need ImPS/2 if you want to make use of a wheel on a USB +mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons. + +joydev +~~~~~~ + +``joydev`` implements v0.x and v1.x Linux joystick API. See +:ref:`joystick-api` for details. + +As soon as any joystick is connected, it can be accessed in /dev/input on:: + + crw-r--r-- 1 root root 13, 0 Apr 1 10:50 js0 + crw-r--r-- 1 root root 13, 1 Apr 1 10:50 js1 + crw-r--r-- 1 root root 13, 2 Apr 1 10:50 js2 + crw-r--r-- 1 root root 13, 3 Apr 1 10:50 js3 + ... + +And so on up to js31 in legacy range, and additional nodes with minors +above 256 if there are more joystick devices. + Device drivers -------------- -Device drivers are the modules that generate events. The events are -however not useful without being handled, so you also will need to use some -of the modules from section 3.2. +Device drivers are the modules that generate events. -usbhid -~~~~~~ +hid-generic +~~~~~~~~~~~ -usbhid is the largest and most complex driver of the whole suite. It -handles all HID devices, and because there is a very wide variety of them, -and because the USB HID specification isn't simple, it needs to be this big. +``hid-generic`` is one of the largest and most complex driver of the +whole suite. It handles all HID devices, and because there is a very +wide variety of them, and because the USB HID specification isn't +simple, it needs to be this big. Currently, it handles USB mice, joysticks, gamepads, steering wheels keyboards, trackballs and digitizers. @@ -131,145 +216,47 @@ Much like usbmouse, this module talks to keyboards with a simplified HIDBP protocol. It's smaller, but doesn't support any extra special keys. Use usbhid instead if there isn't any special reason to use this. -wacom +psmouse +~~~~~~~ + +This is driver for all flavors of pointing devices using PS/2 +protocol, including Synaptics and ALPS touchpads, Intellimouse +Explorer devices, Logitech PS/2 mice and so on. + +atkbd ~~~~~ -This is a driver for Wacom Graphire and Intuos tablets. Not for Wacom -PenPartner, that one is handled by the HID driver. Although the Intuos and -Graphire tablets claim that they are HID tablets as well, they are not and -thus need this specific driver. +This is driver for PS/2 (AT) keyboards. iforce ~~~~~~ A driver for I-Force joysticks and wheels, both over USB and RS232. -It includes ForceFeedback support now, even though Immersion +It includes Force Feedback support now, even though Immersion Corp. considers the protocol a trade secret and won't disclose a word about it. -Event handlers --------------- - -Event handlers distribute the events from the devices to userland and -kernel, as needed. - -keybdev -~~~~~~~ - -keybdev is currently a rather ugly hack that translates the input -events into architecture-specific keyboard raw mode (Xlated AT Set2 on -x86), and passes them into the handle_scancode function of the -keyboard.c module. This works well enough on all architectures that -keybdev can generate rawmode on, other architectures can be added to -it. - -The right way would be to pass the events to keyboard.c directly, -best if keyboard.c would itself be an event handler. This is done in -the input patch, available on the webpage mentioned below. - -mousedev -~~~~~~~~ - -mousedev is also a hack to make programs that use mouse input -work. It takes events from either mice or digitizers/tablets and makes -a PS/2-style (a la /dev/psaux) mouse device available to the -userland. Ideally, the programs could use a more reasonable interface, -for example evdev - -Mousedev devices in /dev/input (as shown above) are:: - - crw-r--r-- 1 root root 13, 32 Mar 28 22:45 mouse0 - crw-r--r-- 1 root root 13, 33 Mar 29 00:41 mouse1 - crw-r--r-- 1 root root 13, 34 Mar 29 00:41 mouse2 - crw-r--r-- 1 root root 13, 35 Apr 1 10:50 mouse3 - ... - ... - crw-r--r-- 1 root root 13, 62 Apr 1 10:50 mouse30 - crw-r--r-- 1 root root 13, 63 Apr 1 10:50 mice - -Each ``mouse`` device is assigned to a single mouse or digitizer, except -the last one - ``mice``. This single character device is shared by all -mice and digitizers, and even if none are connected, the device is -present. This is useful for hotplugging USB mice, so that programs -can open the device even when no mice are present. - -CONFIG_INPUT_MOUSEDEV_SCREEN_[XY] in the kernel configuration are -the size of your screen (in pixels) in XFree86. This is needed if you -want to use your digitizer in X, because its movement is sent to X -via a virtual PS/2 mouse and thus needs to be scaled -accordingly. These values won't be used if you use a mouse only. - -Mousedev will generate either PS/2, ImPS/2 (Microsoft IntelliMouse) or -ExplorerPS/2 (IntelliMouse Explorer) protocols, depending on what the -program reading the data wishes. You can set GPM and X to any of -these. You'll need ImPS/2 if you want to make use of a wheel on a USB -mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons. - -joydev -~~~~~~ - -Joydev implements v0.x and v1.x Linux joystick api, much like -drivers/char/joystick/joystick.c used to in earlier versions. See -joystick-api.txt in the Documentation subdirectory for details. As -soon as any joystick is connected, it can be accessed in /dev/input -on:: - - crw-r--r-- 1 root root 13, 0 Apr 1 10:50 js0 - crw-r--r-- 1 root root 13, 1 Apr 1 10:50 js1 - crw-r--r-- 1 root root 13, 2 Apr 1 10:50 js2 - crw-r--r-- 1 root root 13, 3 Apr 1 10:50 js3 - ... - -And so on up to js31. - -evdev -~~~~~ - -evdev is the generic input event interface. It passes the events -generated in the kernel straight to the program, with timestamps. The -API is still evolving, but should be usable now. It's described in -section 5. - -This should be the way for GPM and X to get keyboard and mouse -events. It allows for multihead in X without any specific multihead -kernel support. The event codes are the same on all architectures and -are hardware independent. - -The devices are in /dev/input:: - - crw-r--r-- 1 root root 13, 64 Apr 1 10:49 event0 - crw-r--r-- 1 root root 13, 65 Apr 1 10:50 event1 - crw-r--r-- 1 root root 13, 66 Apr 1 10:50 event2 - crw-r--r-- 1 root root 13, 67 Apr 1 10:50 event3 - ... - -And so on up to event31. - Verifying if it works ===================== Typing a couple keys on the keyboard should be enough to check that -a USB keyboard works and is correctly connected to the kernel keyboard +a keyboard works and is correctly connected to the kernel keyboard driver. Doing a ``cat /dev/input/mouse0`` (c, 13, 32) will verify that a mouse is also emulated; characters should appear if you move it. You can test the joystick emulation with the ``jstest`` utility, -available in the joystick package (see Documentation/input/joystick.txt). +available in the joystick package (see :ref:`joystick-doc`). -You can test the event devices with the ``evtest`` utility available -in the LinuxConsole project CVS archive (see the URL below). +You can test the event devices with the ``evtest`` utility. + +.. _event-interface: Event interface =============== -Should you want to add event device support into any application (X, gpm, -svgalib ...) I will be happy to provide you any help I -can. Here goes a description of the current state of things, which is going -to be extended, but not changed incompatibly as time goes: - -You can use blocking and nonblocking reads, also select() on the +You can use blocking and nonblocking reads, and also select() on the /dev/input/eventX devices, and you'll always get a whole number of input events on a read. Their layout is:: @@ -290,3 +277,5 @@ list is in include/uapi/linux/input-event-codes.h. ``value`` is the value the event carries. Either a relative change for EV_REL, absolute new value for EV_ABS (joysticks ...), or 0 for EV_KEY for release, 1 for keypress and 2 for autorepeat. + +See :ref:`input-event-codes` for more information about various even codes. diff --git a/Documentation/input/joydev/joystick-api.rst b/Documentation/input/joydev/joystick-api.rst index 42edcfc6e8af..95803e2e8cd0 100644 --- a/Documentation/input/joydev/joystick-api.rst +++ b/Documentation/input/joydev/joystick-api.rst @@ -1,3 +1,5 @@ +.. _joystick-api: + ===================== Programming Interface ===================== diff --git a/Documentation/input/joydev/joystick.rst b/Documentation/input/joydev/joystick.rst index b90705eb69b1..9746fd76cc58 100644 --- a/Documentation/input/joydev/joystick.rst +++ b/Documentation/input/joydev/joystick.rst @@ -1,5 +1,7 @@ .. include:: +.. _joystick-doc: + Introduction ============