Merge remote branch 'intel/drm-intel-next' of /ssd/git/drm-next into drm-core-next
* 'intel/drm-intel-next' of /ssd/git/drm-next: (771 commits) drm/i915: Undo "Uncouple render/power ctx before suspending" drm/i915: Allow the application to choose the constant addressing mode drm/i915: dynamic render p-state support for Sandy Bridge drm/i915: Enable EI mode for RCx decision making on Sandybridge drm/i915/sdvo: Border and stall select became test bits in gen5 drm/i915: Add Guess-o-matic for pageflip timestamping. drm/i915: Add support for precise vblank timestamping (v2) drm/i915: Add frame buffer compression on Sandybridge drm/i915: Add self-refresh support on Sandybridge drm/i915: Wait for vblank before unpinning old fb Revert "drm/i915: Avoid using PIPE_CONTROL on Ironlake" drm/i915: Pass clock limits down to PLL matcher drm/i915: Poll for seqno completion if IRQ is disabled drm/i915/ringbuffer: Make IRQ refcnting atomic agp/intel: Fix missed cached memory flags setting in i965_write_entry() drm/i915/sdvo: Only use the SDVO pin if it is in the valid range drm/i915: Enable RC6 autodownclocking on Sandybridge drm/i915: Terminate the FORCE WAKE after we have finished reading drm/i915/gtt: Clear the cachelines upon resume drm/i915: Restore GTT mapping first upon resume ...
This commit is contained in:
commit
ae09f09e94
83
Documentation/ABI/testing/sysfs-bus-rbd
Normal file
83
Documentation/ABI/testing/sysfs-bus-rbd
Normal file
|
@ -0,0 +1,83 @@
|
|||
What: /sys/bus/rbd/
|
||||
Date: November 2010
|
||||
Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
|
||||
Sage Weil <sage@newdream.net>
|
||||
Description:
|
||||
|
||||
Being used for adding and removing rbd block devices.
|
||||
|
||||
Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
|
||||
|
||||
$ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
|
||||
|
||||
The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
|
||||
will be assigned for any registered block device. If snapshot is used, it will
|
||||
be mapped read-only.
|
||||
|
||||
Removal of a device:
|
||||
|
||||
$ echo <dev-id> > /sys/bus/rbd/remove
|
||||
|
||||
Entries under /sys/bus/rbd/devices/<dev-id>/
|
||||
--------------------------------------------
|
||||
|
||||
client_id
|
||||
|
||||
The ceph unique client id that was assigned for this specific session.
|
||||
|
||||
major
|
||||
|
||||
The block device major number.
|
||||
|
||||
name
|
||||
|
||||
The name of the rbd image.
|
||||
|
||||
pool
|
||||
|
||||
The pool where this rbd image resides. The pool-name pair is unique
|
||||
per rados system.
|
||||
|
||||
size
|
||||
|
||||
The size (in bytes) of the mapped block device.
|
||||
|
||||
refresh
|
||||
|
||||
Writing to this file will reread the image header data and set
|
||||
all relevant datastructures accordingly.
|
||||
|
||||
current_snap
|
||||
|
||||
The current snapshot for which the device is mapped.
|
||||
|
||||
create_snap
|
||||
|
||||
Create a snapshot:
|
||||
|
||||
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
|
||||
|
||||
rollback_snap
|
||||
|
||||
Rolls back data to the specified snapshot. This goes over the entire
|
||||
list of rados blocks and sends a rollback command to each.
|
||||
|
||||
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
|
||||
|
||||
snap_*
|
||||
|
||||
A directory per each snapshot
|
||||
|
||||
|
||||
Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
|
||||
-------------------------------------------------------------
|
||||
|
||||
id
|
||||
|
||||
The rados internal snapshot id assigned for this snapshot
|
||||
|
||||
size
|
||||
|
||||
The size of the image when this snapshot was taken.
|
||||
|
||||
|
|
@ -47,6 +47,20 @@ Date: January 2007
|
|||
KernelVersion: 2.6.20
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Control the bluetooth device. 1 means on, 0 means off.
|
||||
Control the wlan device. 1 means on, 0 means off.
|
||||
This may control the led, the device or both.
|
||||
Users: Lapsus
|
||||
|
||||
What: /sys/devices/platform/asus_laptop/wimax
|
||||
Date: October 2010
|
||||
KernelVersion: 2.6.37
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Control the wimax device. 1 means on, 0 means off.
|
||||
|
||||
What: /sys/devices/platform/asus_laptop/wwan
|
||||
Date: October 2010
|
||||
KernelVersion: 2.6.37
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Control the wwan (3G) device. 1 means on, 0 means off.
|
||||
|
|
10
Documentation/ABI/testing/sysfs-platform-eeepc-wmi
Normal file
10
Documentation/ABI/testing/sysfs-platform-eeepc-wmi
Normal file
|
@ -0,0 +1,10 @@
|
|||
What: /sys/devices/platform/eeepc-wmi/cpufv
|
||||
Date: Oct 2010
|
||||
KernelVersion: 2.6.37
|
||||
Contact: "Corentin Chary" <corentincj@iksaif.net>
|
||||
Description:
|
||||
Change CPU clock configuration (write-only).
|
||||
There are three available clock configuration:
|
||||
* 0 -> Super Performance Mode
|
||||
* 1 -> High Performance Mode
|
||||
* 2 -> Power Saving Mode
|
|
@ -79,10 +79,6 @@
|
|||
</sect2>
|
||||
</sect1>
|
||||
</chapter>
|
||||
<chapter id="clk">
|
||||
<title>Clock Framework Extensions</title>
|
||||
!Iinclude/linux/sh_clk.h
|
||||
</chapter>
|
||||
<chapter id="mach">
|
||||
<title>Machine Specific Interfaces</title>
|
||||
<sect1 id="dreamcast">
|
||||
|
|
|
@ -1,129 +0,0 @@
|
|||
|
||||
Device Interfaces
|
||||
|
||||
Introduction
|
||||
~~~~~~~~~~~~
|
||||
|
||||
Device interfaces are the logical interfaces of device classes that correlate
|
||||
directly to userspace interfaces, like device nodes.
|
||||
|
||||
Each device class may have multiple interfaces through which you can
|
||||
access the same device. An input device may support the mouse interface,
|
||||
the 'evdev' interface, and the touchscreen interface. A SCSI disk would
|
||||
support the disk interface, the SCSI generic interface, and possibly a raw
|
||||
device interface.
|
||||
|
||||
Device interfaces are registered with the class they belong to. As devices
|
||||
are added to the class, they are added to each interface registered with
|
||||
the class. The interface is responsible for determining whether the device
|
||||
supports the interface or not.
|
||||
|
||||
|
||||
Programming Interface
|
||||
~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
struct device_interface {
|
||||
char * name;
|
||||
rwlock_t lock;
|
||||
u32 devnum;
|
||||
struct device_class * devclass;
|
||||
|
||||
struct list_head node;
|
||||
struct driver_dir_entry dir;
|
||||
|
||||
int (*add_device)(struct device *);
|
||||
int (*add_device)(struct intf_data *);
|
||||
};
|
||||
|
||||
int interface_register(struct device_interface *);
|
||||
void interface_unregister(struct device_interface *);
|
||||
|
||||
|
||||
An interface must specify the device class it belongs to. It is added
|
||||
to that class's list of interfaces on registration.
|
||||
|
||||
|
||||
Interfaces can be added to a device class at any time. Whenever it is
|
||||
added, each device in the class is passed to the interface's
|
||||
add_device callback. When an interface is removed, each device is
|
||||
removed from the interface.
|
||||
|
||||
|
||||
Devices
|
||||
~~~~~~~
|
||||
Once a device is added to a device class, it is added to each
|
||||
interface that is registered with the device class. The class
|
||||
is expected to place a class-specific data structure in
|
||||
struct device::class_data. The interface can use that (along with
|
||||
other fields of struct device) to determine whether or not the driver
|
||||
and/or device support that particular interface.
|
||||
|
||||
|
||||
Data
|
||||
~~~~
|
||||
|
||||
struct intf_data {
|
||||
struct list_head node;
|
||||
struct device_interface * intf;
|
||||
struct device * dev;
|
||||
u32 intf_num;
|
||||
};
|
||||
|
||||
int interface_add_data(struct interface_data *);
|
||||
|
||||
The interface is responsible for allocating and initializing a struct
|
||||
intf_data and calling interface_add_data() to add it to the device's list
|
||||
of interfaces it belongs to. This list will be iterated over when the device
|
||||
is removed from the class (instead of all possible interfaces for a class).
|
||||
This structure should probably be embedded in whatever per-device data
|
||||
structure the interface is allocating anyway.
|
||||
|
||||
Devices are enumerated within the interface. This happens in interface_add_data()
|
||||
and the enumerated value is stored in the struct intf_data for that device.
|
||||
|
||||
sysfs
|
||||
~~~~~
|
||||
Each interface is given a directory in the directory of the device
|
||||
class it belongs to:
|
||||
|
||||
Interfaces get a directory in the class's directory as well:
|
||||
|
||||
class/
|
||||
`-- input
|
||||
|-- devices
|
||||
|-- drivers
|
||||
|-- mouse
|
||||
`-- evdev
|
||||
|
||||
When a device is added to the interface, a symlink is created that points
|
||||
to the device's directory in the physical hierarchy:
|
||||
|
||||
class/
|
||||
`-- input
|
||||
|-- devices
|
||||
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|
||||
|-- drivers
|
||||
| `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
|
||||
|-- mouse
|
||||
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|
||||
`-- evdev
|
||||
`-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|
||||
|
||||
|
||||
Future Plans
|
||||
~~~~~~~~~~~~
|
||||
A device interface is correlated directly with a userspace interface
|
||||
for a device, specifically a device node. For instance, a SCSI disk
|
||||
exposes at least two interfaces to userspace: the standard SCSI disk
|
||||
interface and the SCSI generic interface. It might also export a raw
|
||||
device interface.
|
||||
|
||||
Many interfaces have a major number associated with them and each
|
||||
device gets a minor number. Or, multiple interfaces might share one
|
||||
major number, and each will receive a range of minor numbers (like in
|
||||
the case of input devices).
|
||||
|
||||
These major and minor numbers could be stored in the interface
|
||||
structure. Major and minor allocations could happen when the interface
|
||||
is registered with the class, or via a helper function.
|
||||
|
|
@ -196,7 +196,7 @@ csrow3.
|
|||
The representation of the above is reflected in the directory tree
|
||||
in EDAC's sysfs interface. Starting in directory
|
||||
/sys/devices/system/edac/mc each memory controller will be represented
|
||||
by its own 'mcX' directory, where 'X" is the index of the MC.
|
||||
by its own 'mcX' directory, where 'X' is the index of the MC.
|
||||
|
||||
|
||||
..../edac/mc/
|
||||
|
@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
|
|||
....
|
||||
|
||||
Under each 'mcX' directory each 'csrowX' is again represented by a
|
||||
'csrowX', where 'X" is the csrow index:
|
||||
'csrowX', where 'X' is the csrow index:
|
||||
|
||||
|
||||
.../mc/mc0/
|
||||
|
@ -232,7 +232,7 @@ EDAC control and attribute files.
|
|||
|
||||
|
||||
In 'mcX' directories are EDAC control and attribute files for
|
||||
this 'X" instance of the memory controllers:
|
||||
this 'X' instance of the memory controllers:
|
||||
|
||||
|
||||
Counter reset control file:
|
||||
|
@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
|
|||
'csrowX' DIRECTORIES
|
||||
|
||||
In the 'csrowX' directories are EDAC control and attribute files for
|
||||
this 'X" instance of csrow:
|
||||
this 'X' instance of csrow:
|
||||
|
||||
|
||||
Total Uncorrectable Errors count attribute file:
|
||||
|
|
|
@ -4,33 +4,41 @@ please mail me.
|
|||
Geert Uytterhoeven <geert@linux-m68k.org>
|
||||
|
||||
00-INDEX
|
||||
- this file
|
||||
- this file.
|
||||
arkfb.txt
|
||||
- info on the fbdev driver for ARK Logic chips.
|
||||
aty128fb.txt
|
||||
- info on the ATI Rage128 frame buffer driver.
|
||||
cirrusfb.txt
|
||||
- info on the driver for Cirrus Logic chipsets.
|
||||
cmap_xfbdev.txt
|
||||
- an introduction to fbdev's cmap structures.
|
||||
deferred_io.txt
|
||||
- an introduction to deferred IO.
|
||||
efifb.txt
|
||||
- info on the EFI platform driver for Intel based Apple computers.
|
||||
ep93xx-fb.txt
|
||||
- info on the driver for EP93xx LCD controller.
|
||||
fbcon.txt
|
||||
- intro to and usage guide for the framebuffer console (fbcon).
|
||||
framebuffer.txt
|
||||
- introduction to frame buffer devices.
|
||||
imacfb.txt
|
||||
- info on the generic EFI platform driver for Intel based Macs.
|
||||
gxfb.txt
|
||||
- info on the framebuffer driver for AMD Geode GX2 based processors.
|
||||
intel810.txt
|
||||
- documentation for the Intel 810/815 framebuffer driver.
|
||||
intelfb.txt
|
||||
- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
|
||||
internals.txt
|
||||
- quick overview of frame buffer device internals.
|
||||
lxfb.txt
|
||||
- info on the framebuffer driver for AMD Geode LX based processors.
|
||||
matroxfb.txt
|
||||
- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
|
||||
metronomefb.txt
|
||||
- info on the driver for the Metronome display controller.
|
||||
modedb.txt
|
||||
- info on the video mode database.
|
||||
matroxfb.txt
|
||||
- info on the Matrox frame buffer driver.
|
||||
pvr2fb.txt
|
||||
- info on the PowerVR 2 frame buffer driver.
|
||||
pxafb.txt
|
||||
|
@ -39,13 +47,23 @@ s3fb.txt
|
|||
- info on the fbdev driver for S3 Trio/Virge chips.
|
||||
sa1100fb.txt
|
||||
- information about the driver for the SA-1100 LCD controller.
|
||||
sh7760fb.txt
|
||||
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
|
||||
sisfb.txt
|
||||
- info on the framebuffer device driver for various SiS chips.
|
||||
sstfb.txt
|
||||
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
|
||||
tgafb.txt
|
||||
- info on the TGA (DECChip 21030) frame buffer driver
|
||||
- info on the TGA (DECChip 21030) frame buffer driver.
|
||||
tridentfb.txt
|
||||
info on the framebuffer driver for some Trident chip based cards.
|
||||
uvesafb.txt
|
||||
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
|
||||
vesafb.txt
|
||||
- info on the VESA frame buffer device
|
||||
- info on the VESA frame buffer device.
|
||||
viafb.modes
|
||||
- list of modes for VIA Integration Graphic Chip.
|
||||
viafb.txt
|
||||
- info on the VIA Integration Graphic Chip console framebuffer driver.
|
||||
vt8623fb.txt
|
||||
- info on the fb driver for the graphics core in VIA VT8623 chipsets.
|
||||
|
|
|
@ -660,11 +660,10 @@ struct address_space_operations {
|
|||
releasepage: releasepage is called on PagePrivate pages to indicate
|
||||
that the page should be freed if possible. ->releasepage
|
||||
should remove any private data from the page and clear the
|
||||
PagePrivate flag. It may also remove the page from the
|
||||
address_space. If this fails for some reason, it may indicate
|
||||
failure with a 0 return value.
|
||||
This is used in two distinct though related cases. The first
|
||||
is when the VM finds a clean page with no active users and
|
||||
PagePrivate flag. If releasepage() fails for some reason, it must
|
||||
indicate failure with a 0 return value.
|
||||
releasepage() is used in two distinct though related cases. The
|
||||
first is when the VM finds a clean page with no active users and
|
||||
wants to make it a free page. If ->releasepage succeeds, the
|
||||
page will be removed from the address_space and become free.
|
||||
|
||||
|
|
|
@ -2385,6 +2385,11 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
improve throughput, but will also increase the
|
||||
amount of memory reserved for use by the client.
|
||||
|
||||
swapaccount[=0|1]
|
||||
[KNL] Enable accounting of swap in memory resource
|
||||
controller if no parameter or 1 is given or disable
|
||||
it if 0 is given (See Documentation/cgroups/memory.txt)
|
||||
|
||||
swiotlb= [IA-64] Number of I/O TLB slabs
|
||||
|
||||
switches= [HW,M68k]
|
||||
|
|
|
@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
|
|||
Count buffering overhead as bytes/2^tcp_adv_win_scale
|
||||
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
|
||||
if it is <= 0.
|
||||
Possible values are [-31, 31], inclusive.
|
||||
Default: 2
|
||||
|
||||
tcp_allowed_congestion_control - STRING
|
||||
|
|
|
@ -1,32 +0,0 @@
|
|||
Clock framework on SuperH architecture
|
||||
|
||||
The framework on SH extends existing API by the function clk_set_rate_ex,
|
||||
which prototype is as follows:
|
||||
|
||||
clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
|
||||
|
||||
The algo_id parameter is used to specify algorithm used to recalculate clocks,
|
||||
adjanced to clock, specified as first argument. It is assumed that algo_id==0
|
||||
means no changes to adjanced clock
|
||||
|
||||
Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
|
||||
if it is present in ops structure. The method should set the clock rate and adjust
|
||||
all needed clocks according to the passed algo_id.
|
||||
Exact values for algo_id are machine-dependent. For the sh7722, the following
|
||||
values are defined:
|
||||
|
||||
NO_CHANGE = 0,
|
||||
IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */
|
||||
IUS_322, /* I:U:Sh = 3:2:2 */
|
||||
IUS_522, /* I:U:Sh = 5:2:2 */
|
||||
IUS_N11, /* I:U:Sh = N:1:1 */
|
||||
SB_N1, /* Sh:B = N:1 */
|
||||
SB3_N1, /* Sh:B3 = N:1 */
|
||||
SB3_32, /* Sh:B3 = 3:2 */
|
||||
SB3_43, /* Sh:B3 = 4:3 */
|
||||
SB3_54, /* Sh:B3 = 5:4 */
|
||||
BP_N1, /* B:P = N:1 */
|
||||
IP_N1 /* I:P = N:1 */
|
||||
|
||||
Each of these constants means relation between clocks that can be set via the FRQCR
|
||||
register
|
15
MAINTAINERS
15
MAINTAINERS
|
@ -1359,7 +1359,7 @@ F: include/net/bluetooth/
|
|||
|
||||
BONDING DRIVER
|
||||
M: Jay Vosburgh <fubar@us.ibm.com>
|
||||
L: bonding-devel@lists.sourceforge.net
|
||||
L: netdev@vger.kernel.org
|
||||
W: http://sourceforge.net/projects/bonding/
|
||||
S: Supported
|
||||
F: drivers/net/bonding/
|
||||
|
@ -2060,7 +2060,7 @@ F: Documentation/blockdev/drbd/
|
|||
|
||||
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
|
||||
M: Greg Kroah-Hartman <gregkh@suse.de>
|
||||
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
|
||||
S: Supported
|
||||
F: Documentation/kobject.txt
|
||||
F: drivers/base/
|
||||
|
@ -2080,7 +2080,7 @@ F: include/drm/
|
|||
|
||||
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
|
||||
M: Chris Wilson <chris@chris-wilson.co.uk>
|
||||
L: intel-gfx@lists.freedesktop.org
|
||||
L: intel-gfx@lists.freedesktop.org (subscribers-only)
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
|
||||
S: Supported
|
||||
|
@ -2444,10 +2444,12 @@ F: drivers/net/wan/sdla.c
|
|||
FRAMEBUFFER LAYER
|
||||
L: linux-fbdev@vger.kernel.org
|
||||
W: http://linux-fbdev.sourceforge.net/
|
||||
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
|
||||
S: Orphan
|
||||
F: Documentation/fb/
|
||||
F: drivers/video/fb*
|
||||
F: drivers/video/
|
||||
F: include/video/
|
||||
F: include/linux/fb.h
|
||||
|
||||
FREESCALE DMA DRIVER
|
||||
|
@ -4062,9 +4064,8 @@ F: drivers/scsi/NCR_D700.*
|
|||
|
||||
NETEFFECT IWARP RNIC DRIVER (IW_NES)
|
||||
M: Faisal Latif <faisal.latif@intel.com>
|
||||
M: Chien Tung <chien.tin.tung@intel.com>
|
||||
L: linux-rdma@vger.kernel.org
|
||||
W: http://www.neteffect.com
|
||||
W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
|
||||
S: Supported
|
||||
F: drivers/infiniband/hw/nes/
|
||||
|
||||
|
@ -5837,6 +5838,8 @@ M: Chris Metcalf <cmetcalf@tilera.com>
|
|||
W: http://www.tilera.com/scm/
|
||||
S: Supported
|
||||
F: arch/tile/
|
||||
F: drivers/char/hvc_tile.c
|
||||
F: drivers/net/tile/
|
||||
|
||||
TLAN NETWORK DRIVER
|
||||
M: Samuel Chessman <chessman@tux.org>
|
||||
|
|
2
Makefile
2
Makefile
|
@ -1,7 +1,7 @@
|
|||
VERSION = 2
|
||||
PATCHLEVEL = 6
|
||||
SUBLEVEL = 37
|
||||
EXTRAVERSION = -rc3
|
||||
EXTRAVERSION = -rc5
|
||||
NAME = Flesh-Eating Bats with Fangs
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
|
|
@ -9,7 +9,7 @@ config ARM
|
|||
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
|
||||
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
|
||||
select HAVE_ARCH_KGDB
|
||||
select HAVE_KPROBES if (!XIP_KERNEL)
|
||||
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
|
||||
select HAVE_KRETPROBES if (HAVE_KPROBES)
|
||||
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
|
||||
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
|
||||
|
|
|
@ -70,12 +70,7 @@ else
|
|||
$(obj)/uImage: LOADADDR=$(ZRELADDR)
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_THUMB2_KERNEL),y)
|
||||
# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
|
||||
$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
|
||||
else
|
||||
$(obj)/uImage: STARTADDR=$(LOADADDR)
|
||||
endif
|
||||
|
||||
$(obj)/uImage: $(obj)/zImage FORCE
|
||||
$(call if_changed,uimage)
|
||||
|
|
|
@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
|
|||
|
||||
.size _start, . - _start
|
||||
|
||||
.align
|
||||
|
||||
.type data,#object
|
||||
data: .word initrd_start @ source initrd address
|
||||
.word initrd_phys @ destination initrd address
|
||||
|
|
|
@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
|
|||
* sort out different calling conventions
|
||||
*/
|
||||
.align
|
||||
.arm @ Always enter in ARM state
|
||||
start:
|
||||
.type start,#function
|
||||
.rept 8
|
||||
THUMB( adr r12, BSYM(1f) )
|
||||
THUMB( bx r12 )
|
||||
THUMB( .rept 6 )
|
||||
ARM( .rept 8 )
|
||||
mov r0, r0
|
||||
.endr
|
||||
|
||||
|
@ -135,6 +139,7 @@ start:
|
|||
.word 0x016f2818 @ Magic numbers to help the loader
|
||||
.word start @ absolute load/run zImage address
|
||||
.word _edata @ zImage end address
|
||||
THUMB( .thumb )
|
||||
1: mov r7, r1 @ save architecture ID
|
||||
mov r8, r2 @ save atags pointer
|
||||
|
||||
|
@ -174,7 +179,8 @@ not_angel:
|
|||
ldr sp, [r0, #28]
|
||||
#ifdef CONFIG_AUTO_ZRELADDR
|
||||
@ determine final kernel image address
|
||||
and r4, pc, #0xf8000000
|
||||
mov r4, pc
|
||||
and r4, r4, #0xf8000000
|
||||
add r4, r4, #TEXT_OFFSET
|
||||
#else
|
||||
ldr r4, =zreladdr
|
||||
|
@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
|
|||
*/
|
||||
mov r1, #0x1e
|
||||
orr r1, r1, #3 << 10
|
||||
mov r2, pc, lsr #20
|
||||
mov r2, pc
|
||||
mov r2, r2, lsr #20
|
||||
orr r1, r1, r2, lsl #20
|
||||
add r0, r3, r2, lsl #2
|
||||
str r1, [r0], #4
|
||||
|
@ -1084,6 +1091,6 @@ memdump: mov r12, r0
|
|||
reloc_end:
|
||||
|
||||
.align
|
||||
.section ".stack", "w"
|
||||
.section ".stack", "aw", %nobits
|
||||
user_stack: .space 4096
|
||||
user_stack_end:
|
||||
|
|
|
@ -57,7 +57,7 @@ SECTIONS
|
|||
.bss : { *(.bss) }
|
||||
_end = .;
|
||||
|
||||
.stack (NOLOAD) : { *(.stack) }
|
||||
.stack : { *(.stack) }
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
|
|
|
@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
|||
unsigned int shift = (irq % 4) * 8;
|
||||
unsigned int cpu = cpumask_first(mask_val);
|
||||
u32 val;
|
||||
struct irq_desc *desc;
|
||||
|
||||
spin_lock(&irq_controller_lock);
|
||||
irq_desc[irq].node = cpu;
|
||||
desc = irq_to_desc(irq);
|
||||
if (desc == NULL) {
|
||||
spin_unlock(&irq_controller_lock);
|
||||
return -EINVAL;
|
||||
}
|
||||
desc->node = cpu;
|
||||
val = readl(reg) & ~(0xff << shift);
|
||||
val |= 1 << (cpu + shift);
|
||||
writel(val, reg);
|
||||
|
@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
|
|||
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
|
||||
unsigned int irq_start)
|
||||
{
|
||||
unsigned int max_irq, i;
|
||||
unsigned int gic_irqs, irq_limit, i;
|
||||
u32 cpumask = 1 << smp_processor_id();
|
||||
|
||||
if (gic_nr >= MAX_GIC_NR)
|
||||
|
@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
|
|||
|
||||
/*
|
||||
* Find out how many interrupts are supported.
|
||||
*/
|
||||
max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
|
||||
max_irq = (max_irq + 1) * 32;
|
||||
|
||||
/*
|
||||
* The GIC only supports up to 1020 interrupt sources.
|
||||
* Limit this to either the architected maximum, or the
|
||||
* platform maximum.
|
||||
*/
|
||||
if (max_irq > max(1020, NR_IRQS))
|
||||
max_irq = max(1020, NR_IRQS);
|
||||
gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
|
||||
gic_irqs = (gic_irqs + 1) * 32;
|
||||
if (gic_irqs > 1020)
|
||||
gic_irqs = 1020;
|
||||
|
||||
/*
|
||||
* Set all global interrupts to be level triggered, active low.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 16)
|
||||
for (i = 32; i < gic_irqs; i += 16)
|
||||
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
|
||||
|
||||
/*
|
||||
* Set all global interrupts to this CPU only.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 4)
|
||||
for (i = 32; i < gic_irqs; i += 4)
|
||||
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
|
||||
|
||||
/*
|
||||
* Set priority on all global interrupts.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 4)
|
||||
for (i = 32; i < gic_irqs; i += 4)
|
||||
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
|
||||
|
||||
/*
|
||||
* Disable all interrupts. Leave the PPI and SGIs alone
|
||||
* as these enables are banked registers.
|
||||
*/
|
||||
for (i = 32; i < max_irq; i += 32)
|
||||
for (i = 32; i < gic_irqs; i += 32)
|
||||
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
|
||||
|
||||
/*
|
||||
* Limit number of interrupts registered to the platform maximum
|
||||
*/
|
||||
irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
|
||||
if (WARN_ON(irq_limit > NR_IRQS))
|
||||
irq_limit = NR_IRQS;
|
||||
|
||||
/*
|
||||
* Setup the Linux IRQ subsystem.
|
||||
*/
|
||||
for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
|
||||
for (i = irq_start; i < irq_limit; i++) {
|
||||
set_irq_chip(i, &gic_chip);
|
||||
set_irq_chip_data(i, &gic_data[gic_nr]);
|
||||
set_irq_handler(i, handle_level_irq);
|
||||
|
|
341
arch/arm/configs/at91rm9200_defconfig
Normal file
341
arch/arm/configs/at91rm9200_defconfig
Normal file
|
@ -0,0 +1,341 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ONEARM=y
|
||||
CONFIG_ARCH_AT91RM9200DK=y
|
||||
CONFIG_MACH_AT91RM9200EK=y
|
||||
CONFIG_MACH_CSB337=y
|
||||
CONFIG_MACH_CSB637=y
|
||||
CONFIG_MACH_CARMEVA=y
|
||||
CONFIG_MACH_ATEB9200=y
|
||||
CONFIG_MACH_KB9200=y
|
||||
CONFIG_MACH_PICOTUX2XX=y
|
||||
CONFIG_MACH_KAFA=y
|
||||
CONFIG_MACH_ECBAT91=y
|
||||
CONFIG_MACH_YL9200=y
|
||||
CONFIG_MACH_CPUAT91=y
|
||||
CONFIG_MACH_ECO920=y
|
||||
CONFIG_MTD_AT91_DATAFLASH_CARD=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_AT91_TIMER_HZ=100
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x10000000
|
||||
CONFIG_ZBOOT_ROM_BSS=0x20040000
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=m
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_NET_IPIP=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_INET_AH=m
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_IPCOMP=m
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET_XFRM_MODE_BEET=m
|
||||
CONFIG_IPV6_PRIVACY=y
|
||||
CONFIG_IPV6_ROUTER_PREF=y
|
||||
CONFIG_IPV6_ROUTE_INFO=y
|
||||
CONFIG_INET6_AH=m
|
||||
CONFIG_INET6_ESP=m
|
||||
CONFIG_INET6_IPCOMP=m
|
||||
CONFIG_IPV6_MIP6=m
|
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_L2CAP=m
|
||||
CONFIG_BT_SCO=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_AFS_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_EEPROM_LEGACY=m
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_TUN=m
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_USB_CATC=m
|
||||
CONFIG_USB_KAWETH=m
|
||||
CONFIG_USB_PEGASUS=m
|
||||
CONFIG_USB_RTL8150=m
|
||||
CONFIG_USB_USBNET=m
|
||||
CONFIG_USB_NET_DM9601=m
|
||||
CONFIG_USB_NET_GL620A=m
|
||||
CONFIG_USB_NET_PLUSB=m
|
||||
CONFIG_USB_NET_RNDIS_HOST=m
|
||||
CONFIG_USB_ALI_M5632=y
|
||||
CONFIG_USB_AN2720=y
|
||||
CONFIG_USB_EPSON2888=y
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
CONFIG_PPP_DEFLATE=y
|
||||
CONFIG_PPP_BSDCOMP=y
|
||||
CONFIG_PPP_MPPE=m
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_SLIP=m
|
||||
CONFIG_SLIP_COMPRESSED=y
|
||||
CONFIG_SLIP_SMART=y
|
||||
CONFIG_SLIP_MODE_SLIP6=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_SENSORS_ADM1021=m
|
||||
CONFIG_SENSORS_ADM1025=m
|
||||
CONFIG_SENSORS_ADM1026=m
|
||||
CONFIG_SENSORS_ADM1029=m
|
||||
CONFIG_SENSORS_ADM1031=m
|
||||
CONFIG_SENSORS_ADM9240=m
|
||||
CONFIG_SENSORS_DS1621=m
|
||||
CONFIG_SENSORS_GL518SM=m
|
||||
CONFIG_SENSORS_GL520SM=m
|
||||
CONFIG_SENSORS_IT87=m
|
||||
CONFIG_SENSORS_LM63=m
|
||||
CONFIG_SENSORS_LM73=m
|
||||
CONFIG_SENSORS_LM75=m
|
||||
CONFIG_SENSORS_LM77=m
|
||||
CONFIG_SENSORS_LM78=m
|
||||
CONFIG_SENSORS_LM80=m
|
||||
CONFIG_SENSORS_LM83=m
|
||||
CONFIG_SENSORS_LM85=m
|
||||
CONFIG_SENSORS_LM87=m
|
||||
CONFIG_SENSORS_LM90=m
|
||||
CONFIG_SENSORS_LM92=m
|
||||
CONFIG_SENSORS_MAX1619=m
|
||||
CONFIG_SENSORS_PCF8591=m
|
||||
CONFIG_SENSORS_SMSC47B397=m
|
||||
CONFIG_SENSORS_W83781D=m
|
||||
CONFIG_SENSORS_W83791D=m
|
||||
CONFIG_SENSORS_W83792D=m
|
||||
CONFIG_SENSORS_W83793=m
|
||||
CONFIG_SENSORS_W83L785TS=m
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_TILEBLITTING=y
|
||||
CONFIG_FB_S1D13XXX=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
CONFIG_DISPLAY_SUPPORT=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_MINI_4x6=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
||||
CONFIG_USB_SERIAL_MCT_U232=y
|
||||
CONFIG_USB_SERIAL_PL2303=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_PCF8563=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_NTFS_FS=m
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_JFFS2_LZO=y
|
||||
CONFIG_JFFS2_RUBIN=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_MINIX_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
||||
CONFIG_SMB_FS=m
|
||||
CONFIG_CIFS=m
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_737=m
|
||||
CONFIG_NLS_CODEPAGE_775=m
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_CODEPAGE_852=m
|
||||
CONFIG_NLS_CODEPAGE_855=m
|
||||
CONFIG_NLS_CODEPAGE_857=m
|
||||
CONFIG_NLS_CODEPAGE_860=m
|
||||
CONFIG_NLS_CODEPAGE_861=m
|
||||
CONFIG_NLS_CODEPAGE_862=m
|
||||
CONFIG_NLS_CODEPAGE_863=m
|
||||
CONFIG_NLS_CODEPAGE_864=m
|
||||
CONFIG_NLS_CODEPAGE_865=m
|
||||
CONFIG_NLS_CODEPAGE_866=m
|
||||
CONFIG_NLS_CODEPAGE_869=m
|
||||
CONFIG_NLS_CODEPAGE_936=m
|
||||
CONFIG_NLS_CODEPAGE_950=m
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_CODEPAGE_949=m
|
||||
CONFIG_NLS_CODEPAGE_874=m
|
||||
CONFIG_NLS_ISO8859_8=m
|
||||
CONFIG_NLS_CODEPAGE_1250=m
|
||||
CONFIG_NLS_CODEPAGE_1251=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_2=m
|
||||
CONFIG_NLS_ISO8859_3=m
|
||||
CONFIG_NLS_ISO8859_4=m
|
||||
CONFIG_NLS_ISO8859_5=m
|
||||
CONFIG_NLS_ISO8859_6=m
|
||||
CONFIG_NLS_ISO8859_7=m
|
||||
CONFIG_NLS_ISO8859_9=m
|
||||
CONFIG_NLS_ISO8859_13=m
|
||||
CONFIG_NLS_ISO8859_14=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_KOI8_R=m
|
||||
CONFIG_NLS_KOI8_U=m
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
|
@ -1,72 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91RM9200DK=y
|
||||
CONFIG_MACH_ECO920=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,73 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_AT91RM9200EK=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_S1D13XXX=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,131 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=m
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ATEB9200=y
|
||||
CONFIG_PCCARD=m
|
||||
CONFIG_AT91_CF=m
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK_RO=y
|
||||
CONFIG_BLK_DEV_LOOP=m
|
||||
CONFIG_BLK_DEV_NBD=m
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=m
|
||||
CONFIG_TUN=m
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
CONFIG_USB_USBNET=y
|
||||
CONFIG_USB_NET_GL620A=y
|
||||
CONFIG_USB_NET_PLUSB=y
|
||||
CONFIG_USB_NET_RNDIS_HOST=y
|
||||
CONFIG_USB_ALI_M5632=y
|
||||
CONFIG_USB_AN2720=y
|
||||
CONFIG_USB_EPSON2888=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_SYNC_TTY=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
CONFIG_I2C_GPIO=m
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_USB_HID=m
|
||||
CONFIG_HID_PID=y
|
||||
CONFIG_USB_HIDDEV=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_STORAGE_DATAFAB=m
|
||||
CONFIG_USB_STORAGE_FREECOM=m
|
||||
CONFIG_USB_STORAGE_USBAT=m
|
||||
CONFIG_USB_STORAGE_SDDR09=m
|
||||
CONFIG_USB_STORAGE_SDDR55=m
|
||||
CONFIG_USB_STORAGE_JUMPSHOT=m
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=m
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
CONFIG_USB_GADGET=m
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_GADGETFS=m
|
||||
CONFIG_USB_FILE_STORAGE=m
|
||||
CONFIG_USB_G_SERIAL=m
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=m
|
||||
CONFIG_EXT3_FS=m
|
||||
CONFIG_REISERFS_FS=m
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_NTFS_FS=m
|
||||
CONFIG_NTFS_RW=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_NFSD=m
|
||||
CONFIG_NFSD_V4=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
CONFIG_MINIX_SUBPARTITION=y
|
||||
CONFIG_SOLARIS_X86_PARTITION=y
|
||||
CONFIG_UNIXWARE_DISKLABEL=y
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_ARC4=m
|
||||
CONFIG_CRC16=m
|
||||
CONFIG_LIBCRC32C=m
|
|
@ -1,47 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CARMEVA=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_SERIO=m
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
|
@ -1,112 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CPUAT91=y
|
||||
CONFIG_AT91_TIMER_HZ=100
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
CONFIG_PPP_DEFLATE=y
|
||||
CONFIG_PPP_BSDCOMP=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_HID_SUPPORT is not set
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ETH=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_PCF8563=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_MINIX_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
|
@ -1,104 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CSB337=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_SSC=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
||||
CONFIG_USB_SERIAL_MCT_U232=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
|
||||
# CONFIG_RTC_INTF_SYSFS is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,98 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_CSB637=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
|
||||
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
||||
CONFIG_USB_SERIAL_MCT_U232=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,99 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ECBAT91=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_AFS_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_PRINTER=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
|
@ -1,61 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_KAFA=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK_RO=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_DES=y
|
|
@ -1,127 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_KALLSYMS_EXTRA_PASS=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_KB9200=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x10000000
|
||||
CONFIG_ZBOOT_ROM_BSS=0x20040000
|
||||
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
# CONFIG_FIRMWARE_IN_KERNEL is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=16384
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_ATMEL_SSC=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
CONFIG_SCSI_CONSTANTS=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SPI_ATTRS=m
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_MODE_HELPERS=y
|
||||
CONFIG_FB_TILEBLITTING=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
# CONFIG_LCD_CLASS_DEVICE is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FONTS=y
|
||||
CONFIG_FONT_MINI_4x6=y
|
||||
# CONFIG_HID_SUPPORT is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_LIBUSUAL=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
|
@ -1,80 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_ONEARM=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PCCARD=y
|
||||
CONFIG_AT91_CF=y
|
||||
CONFIG_LEDS=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IPV6=y
|
||||
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET6_XFRM_MODE_BEET is not set
|
||||
# CONFIG_IPV6_SIT is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=y
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -1,242 +0,0 @@
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=m
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_MACH_PICOTUX2XX=y
|
||||
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_BINFMT_MISC=m
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=m
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=m
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_NET_IPIP=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_INET_AH=m
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_IPCOMP=m
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET_XFRM_MODE_BEET=m
|
||||
CONFIG_INET_DIAG=m
|
||||
CONFIG_IPV6_PRIVACY=y
|
||||
CONFIG_IPV6_ROUTER_PREF=y
|
||||
CONFIG_IPV6_ROUTE_INFO=y
|
||||
CONFIG_INET6_AH=m
|
||||
CONFIG_INET6_ESP=m
|
||||
CONFIG_INET6_IPCOMP=m
|
||||
CONFIG_IPV6_MIP6=m
|
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_L2CAP=m
|
||||
CONFIG_BT_SCO=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
CONFIG_BT_BNEP_MC_FILTER=y
|
||||
CONFIG_BT_BNEP_PROTO_FILTER=y
|
||||
CONFIG_BT_HIDP=m
|
||||
CONFIG_FW_LOADER=m
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_BLK_DEV_LOOP=m
|
||||
CONFIG_EEPROM_LEGACY=m
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
CONFIG_BLK_DEV_SR_VENDOR=y
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_TUN=m
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
CONFIG_USB_CATC=m
|
||||
CONFIG_USB_KAWETH=m
|
||||
CONFIG_USB_PEGASUS=m
|
||||
CONFIG_USB_RTL8150=m
|
||||
CONFIG_USB_USBNET=m
|
||||
CONFIG_USB_NET_DM9601=m
|
||||
CONFIG_USB_NET_GL620A=m
|
||||
CONFIG_USB_NET_PLUSB=m
|
||||
CONFIG_USB_NET_MCS7830=m
|
||||
CONFIG_USB_NET_RNDIS_HOST=m
|
||||
CONFIG_USB_ALI_M5632=y
|
||||
CONFIG_USB_AN2720=y
|
||||
CONFIG_USB_EPSON2888=y
|
||||
CONFIG_USB_KC2190=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPP_MPPE=m
|
||||
CONFIG_PPPOE=m
|
||||
CONFIG_SLIP=m
|
||||
CONFIG_SLIP_COMPRESSED=y
|
||||
CONFIG_SLIP_SMART=y
|
||||
CONFIG_SLIP_MODE_SLIP6=y
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_I2C=m
|
||||
CONFIG_I2C_CHARDEV=m
|
||||
CONFIG_I2C_GPIO=m
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_SENSORS_ADM1021=m
|
||||
CONFIG_SENSORS_ADM1025=m
|
||||
CONFIG_SENSORS_ADM1026=m
|
||||
CONFIG_SENSORS_ADM1029=m
|
||||
CONFIG_SENSORS_ADM1031=m
|
||||
CONFIG_SENSORS_ADM9240=m
|
||||
CONFIG_SENSORS_DS1621=m
|
||||
CONFIG_SENSORS_GL518SM=m
|
||||
CONFIG_SENSORS_GL520SM=m
|
||||
CONFIG_SENSORS_IT87=m
|
||||
CONFIG_SENSORS_LM63=m
|
||||
CONFIG_SENSORS_LM75=m
|
||||
CONFIG_SENSORS_LM77=m
|
||||
CONFIG_SENSORS_LM78=m
|
||||
CONFIG_SENSORS_LM80=m
|
||||
CONFIG_SENSORS_LM83=m
|
||||
CONFIG_SENSORS_LM85=m
|
||||
CONFIG_SENSORS_LM87=m
|
||||
CONFIG_SENSORS_LM90=m
|
||||
CONFIG_SENSORS_LM92=m
|
||||
CONFIG_SENSORS_MAX1619=m
|
||||
CONFIG_SENSORS_PCF8591=m
|
||||
CONFIG_SENSORS_SMSC47B397=m
|
||||
CONFIG_SENSORS_W83781D=m
|
||||
CONFIG_SENSORS_W83791D=m
|
||||
CONFIG_SENSORS_W83792D=m
|
||||
CONFIG_SENSORS_W83793=m
|
||||
CONFIG_SENSORS_W83L785TS=m
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91RM9200_WATCHDOG=m
|
||||
CONFIG_HID=m
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_RTC_CLASS=m
|
||||
CONFIG_RTC_DRV_AT91RM9200=m
|
||||
CONFIG_EXT2_FS=m
|
||||
CONFIG_EXT3_FS=m
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_UDF_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_NTFS_FS=m
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_SUMMARY=y
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_SMB_FS=m
|
||||
CONFIG_CIFS=m
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_AMIGA_PARTITION=y
|
||||
CONFIG_NLS_DEFAULT="utf-8"
|
||||
CONFIG_NLS_CODEPAGE_437=m
|
||||
CONFIG_NLS_CODEPAGE_737=m
|
||||
CONFIG_NLS_CODEPAGE_775=m
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_CODEPAGE_852=m
|
||||
CONFIG_NLS_CODEPAGE_855=m
|
||||
CONFIG_NLS_CODEPAGE_857=m
|
||||
CONFIG_NLS_CODEPAGE_860=m
|
||||
CONFIG_NLS_CODEPAGE_861=m
|
||||
CONFIG_NLS_CODEPAGE_862=m
|
||||
CONFIG_NLS_CODEPAGE_863=m
|
||||
CONFIG_NLS_CODEPAGE_864=m
|
||||
CONFIG_NLS_CODEPAGE_865=m
|
||||
CONFIG_NLS_CODEPAGE_866=m
|
||||
CONFIG_NLS_CODEPAGE_869=m
|
||||
CONFIG_NLS_CODEPAGE_936=m
|
||||
CONFIG_NLS_CODEPAGE_950=m
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_CODEPAGE_949=m
|
||||
CONFIG_NLS_CODEPAGE_874=m
|
||||
CONFIG_NLS_ISO8859_8=m
|
||||
CONFIG_NLS_CODEPAGE_1250=m
|
||||
CONFIG_NLS_CODEPAGE_1251=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
CONFIG_NLS_ISO8859_2=m
|
||||
CONFIG_NLS_ISO8859_3=m
|
||||
CONFIG_NLS_ISO8859_4=m
|
||||
CONFIG_NLS_ISO8859_5=m
|
||||
CONFIG_NLS_ISO8859_6=m
|
||||
CONFIG_NLS_ISO8859_7=m
|
||||
CONFIG_NLS_ISO8859_9=m
|
||||
CONFIG_NLS_ISO8859_13=m
|
||||
CONFIG_NLS_ISO8859_14=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_KOI8_R=m
|
||||
CONFIG_NLS_KOI8_U=m
|
||||
CONFIG_NLS_UTF8=m
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_CRYPTO_NULL=m
|
||||
CONFIG_CRYPTO_TEST=m
|
||||
CONFIG_CRYPTO_LRW=m
|
||||
CONFIG_CRYPTO_PCBC=m
|
||||
CONFIG_CRYPTO_XCBC=m
|
||||
CONFIG_CRYPTO_MD4=m
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_SHA256=m
|
||||
CONFIG_CRYPTO_SHA512=m
|
||||
CONFIG_CRYPTO_TGR192=m
|
||||
CONFIG_CRYPTO_WP512=m
|
||||
CONFIG_CRYPTO_ANUBIS=m
|
||||
CONFIG_CRYPTO_BLOWFISH=m
|
||||
CONFIG_CRYPTO_CAMELLIA=m
|
||||
CONFIG_CRYPTO_CAST5=m
|
||||
CONFIG_CRYPTO_CAST6=m
|
||||
CONFIG_CRYPTO_FCRYPT=m
|
||||
CONFIG_CRYPTO_KHAZAD=m
|
||||
CONFIG_CRYPTO_SERPENT=m
|
||||
CONFIG_CRYPTO_TEA=m
|
||||
CONFIG_CRYPTO_TWOFISH=m
|
||||
CONFIG_LIBCRC32C=m
|
|
@ -1,137 +0,0 @@
|
|||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91RM9200DK=y
|
||||
CONFIG_MACH_YL9200=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=3
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ADS7846=y
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_DEBUG=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_DISPLAY_SUPPORT=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
CONFIG_USB_MON=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_M66592=y
|
||||
CONFIG_USB_FILE_STORAGE=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_DEBUG=y
|
||||
# CONFIG_MMC_BLOCK_BOUNCE is not set
|
||||
CONFIG_MMC_AT91=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91RM9200=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_REISERFS_FS=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
CONFIG_UDF_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=1
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_JFFS2_RUBIN=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_SLUB_DEBUG_ON=y
|
||||
CONFIG_DEBUG_KOBJECT=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_LIST=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
|
@ -238,7 +238,7 @@
|
|||
@ Slightly optimised to avoid incrementing the pointer twice
|
||||
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
|
||||
.if \rept == 2
|
||||
usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
|
||||
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
|
||||
.endif
|
||||
|
||||
add\cond \ptr, #\rept * \inc
|
||||
|
|
|
@ -13,6 +13,10 @@ typedef struct {
|
|||
|
||||
#ifdef CONFIG_CPU_HAS_ASID
|
||||
#define ASID(mm) ((mm)->context.id & 255)
|
||||
|
||||
/* init_mm.context.id_lock should be initialized. */
|
||||
#define INIT_MM_CONTEXT(name) \
|
||||
.context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
|
||||
#else
|
||||
#define ASID(mm) (0)
|
||||
#endif
|
||||
|
|
|
@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
|
|||
|
||||
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
|
||||
|
||||
/* we don't need complex calculations here as the pmd is folded into the pgd */
|
||||
#define pmd_addr_end(addr,end) (end)
|
||||
|
||||
/*
|
||||
* Conversion functions: convert a page and protection to a page entry,
|
||||
* and a page entry and page directory to the page they refer to.
|
||||
|
|
|
@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
|
|||
* A special ghost syscall is used for that (see traps.c).
|
||||
*/
|
||||
stmfd sp!, {r7, lr}
|
||||
ldr r7, =1f @ it's 20 bits
|
||||
ldr r7, 1f @ it's 20 bits
|
||||
swi __ARM_NR_cmpxchg
|
||||
ldmfd sp!, {r7, pc}
|
||||
1: .word __ARM_NR_cmpxchg
|
||||
|
|
|
@ -85,9 +85,11 @@ ENTRY(stext)
|
|||
mrc p15, 0, r9, c0, c0 @ get processor id
|
||||
bl __lookup_processor_type @ r5=procinfo r9=cpuid
|
||||
movs r10, r5 @ invalid processor (r5=0)?
|
||||
THUMB( it eq ) @ force fixup-able long branch encoding
|
||||
beq __error_p @ yes, error 'p'
|
||||
bl __lookup_machine_type @ r5=machinfo
|
||||
movs r8, r5 @ invalid machine (r5=0)?
|
||||
THUMB( it eq ) @ force fixup-able long branch encoding
|
||||
beq __error_a @ yes, error 'a'
|
||||
bl __vet_atags
|
||||
#ifdef CONFIG_SMP_ON_UP
|
||||
|
@ -262,6 +264,7 @@ __create_page_tables:
|
|||
mov pc, lr
|
||||
ENDPROC(__create_page_tables)
|
||||
.ltorg
|
||||
.align
|
||||
__enable_mmu_loc:
|
||||
.long .
|
||||
.long __enable_mmu
|
||||
|
@ -282,6 +285,7 @@ ENTRY(secondary_startup)
|
|||
bl __lookup_processor_type
|
||||
movs r10, r5 @ invalid processor?
|
||||
moveq r0, #'p' @ yes, error 'p'
|
||||
THUMB( it eq ) @ force fixup-able long branch encoding
|
||||
beq __error_p
|
||||
|
||||
/*
|
||||
|
@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
|
|||
b secondary_start_kernel
|
||||
ENDPROC(__secondary_switched)
|
||||
|
||||
.align
|
||||
|
||||
.type __secondary_data, %object
|
||||
__secondary_data:
|
||||
.long .
|
||||
|
@ -413,6 +419,7 @@ __fixup_smp_on_up:
|
|||
mov pc, lr
|
||||
ENDPROC(__fixup_smp)
|
||||
|
||||
.align
|
||||
1: .word .
|
||||
.word __smpalt_begin
|
||||
.word __smpalt_end
|
||||
|
|
|
@ -59,6 +59,8 @@ relocate_new_kernel:
|
|||
ldr r2,kexec_boot_atags
|
||||
mov pc,lr
|
||||
|
||||
.align
|
||||
|
||||
.globl kexec_start_address
|
||||
kexec_start_address:
|
||||
.long 0x0
|
||||
|
|
|
@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
|
|||
*/
|
||||
.L_found:
|
||||
#if __LINUX_ARM_ARCH__ >= 5
|
||||
rsb r1, r3, #0
|
||||
and r3, r3, r1
|
||||
rsb r0, r3, #0
|
||||
and r3, r3, r0
|
||||
clz r3, r3
|
||||
rsb r3, r3, #31
|
||||
add r0, r2, r3
|
||||
|
@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
|
|||
addeq r2, r2, #1
|
||||
mov r0, r2
|
||||
#endif
|
||||
cmp r1, r0 @ Clamp to maxbit
|
||||
movlo r0, r1
|
||||
mov pc, lr
|
||||
|
||||
|
|
|
@ -11,6 +11,6 @@
|
|||
#ifndef __ASM_ARCH_VMALLOC_H
|
||||
#define __ASM_ARCH_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif /* __ASM_ARCH_VMALLOC_H */
|
||||
|
|
|
@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
|
|||
|
||||
# AT91RM9200 board-specific support
|
||||
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
|
||||
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
|
||||
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
|
||||
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
|
||||
obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
|
||||
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
|
||||
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
|
||||
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
|
||||
|
|
|
@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
|
|||
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
||||
struct platform_device *atmel_default_console_device; /* the serial console device */
|
||||
|
||||
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* Fill in list of supported UARTs */
|
||||
for (i = 0; i < config->nr_tty; i++) {
|
||||
switch (config->tty_map[i]) {
|
||||
case 0:
|
||||
configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
at91_uarts[i] = &at91rm9200_uart0_device;
|
||||
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
|
||||
break;
|
||||
case 1:
|
||||
configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
|
||||
at91_uarts[i] = &at91rm9200_uart1_device;
|
||||
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
|
||||
break;
|
||||
case 2:
|
||||
configure_usart2_pins(0);
|
||||
at91_uarts[i] = &at91rm9200_uart2_device;
|
||||
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
|
||||
break;
|
||||
case 3:
|
||||
configure_usart3_pins(0);
|
||||
at91_uarts[i] = &at91rm9200_uart3_device;
|
||||
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
|
||||
break;
|
||||
case 4:
|
||||
configure_dbgu_pins();
|
||||
at91_uarts[i] = &at91rm9200_dbgu_device;
|
||||
at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
|
||||
break;
|
||||
default:
|
||||
continue;
|
||||
}
|
||||
at91_uarts[i]->id = i; /* update ID number to mapped ID */
|
||||
}
|
||||
|
||||
/* Set serial console device */
|
||||
if (config->console_tty < ATMEL_MAX_UART)
|
||||
atmel_default_console_device = at91_uarts[config->console_tty];
|
||||
if (!atmel_default_console_device)
|
||||
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
||||
}
|
||||
|
||||
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
|
|
|
@ -39,24 +39,24 @@
|
|||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata onearm_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 3,
|
||||
.tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init onearm_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&onearm_uart_config);
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
|
||||
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
|
||||
/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
||||
at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
|
||||
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
||||
| ATMEL_UART_RI);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init onearm_init_irq(void)
|
||||
|
|
|
@ -39,17 +39,6 @@
|
|||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata kafa_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init kafa_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
|
@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
|
|||
/* Set up the LEDs */
|
||||
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&kafa_uart_config);
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
|
||||
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init kafa_init_irq(void)
|
||||
|
|
|
@ -43,24 +43,21 @@
|
|||
#include "generic.h"
|
||||
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata picotux200_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init picotux200_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91rm9200_initialize(18432000, AT91RM9200_BGA);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&picotux200_uart_config);
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
||||
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
|
||||
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
||||
| ATMEL_UART_RI);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init picotux200_init_irq(void)
|
||||
|
@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
|
|||
.ports = 1,
|
||||
};
|
||||
|
||||
// static struct at91_udc_data __initdata picotux200_udc_data = {
|
||||
// .vbus_pin = AT91_PIN_PD4,
|
||||
// .pullup_pin = AT91_PIN_PD5,
|
||||
// };
|
||||
|
||||
static struct at91_mmc_data __initdata picotux200_mmc_data = {
|
||||
.det_pin = AT91_PIN_PB27,
|
||||
.slot_b = 0,
|
||||
|
@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
|
|||
.wp_pin = AT91_PIN_PA17,
|
||||
};
|
||||
|
||||
// static struct spi_board_info picotux200_spi_devices[] = {
|
||||
// { /* DataFlash chip */
|
||||
// .modalias = "mtd_dataflash",
|
||||
// .chip_select = 0,
|
||||
// .max_speed_hz = 15 * 1000 * 1000,
|
||||
// },
|
||||
// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
// { /* DataFlash card */
|
||||
// .modalias = "mtd_dataflash",
|
||||
// .chip_select = 3,
|
||||
// .max_speed_hz = 15 * 1000 * 1000,
|
||||
// },
|
||||
// #endif
|
||||
// };
|
||||
|
||||
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
|
||||
#define PICOTUX200_FLASH_SIZE SZ_4M
|
||||
|
||||
|
@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
|
|||
at91_add_device_eth(&picotux200_eth_data);
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&picotux200_usbh_data);
|
||||
/* USB Device */
|
||||
// at91_add_device_udc(&picotux200_udc_data);
|
||||
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
|
||||
/* I2C */
|
||||
at91_add_device_i2c(NULL, 0);
|
||||
/* SPI */
|
||||
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
|
||||
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
/* DataFlash card */
|
||||
at91_set_gpio_output(AT91_PIN_PB22, 0);
|
||||
#else
|
||||
/* MMC */
|
||||
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
|
||||
at91_add_device_mmc(0, &picotux200_mmc_data);
|
||||
#endif
|
||||
/* NOR Flash */
|
||||
platform_device_register(&picotux200_flash);
|
||||
}
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91/board-dk.c
|
||||
* linux/arch/arm/mach-at91/board-rm9200dk.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
*
|
||||
|
@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
|
|||
// .vcc_pin = ... always powered
|
||||
};
|
||||
|
||||
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
static struct at91_mmc_data __initdata dk_mmc_data = {
|
||||
.slot_b = 0,
|
||||
.wire4 = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct spi_board_info dk_spi_devices[] = {
|
||||
{ /* DataFlash chip */
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91/board-ek.c
|
||||
* linux/arch/arm/mach-at91/board-rm9200ek.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
*
|
||||
|
@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
|
|||
.pullup_pin = AT91_PIN_PD5,
|
||||
};
|
||||
|
||||
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
|
||||
static struct at91_mmc_data __initdata ek_mmc_data = {
|
||||
.det_pin = AT91_PIN_PB27,
|
||||
.slot_b = 0,
|
||||
.wire4 = 1,
|
||||
.wp_pin = AT91_PIN_PA17,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
{ /* DataFlash chip */
|
|
@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
|
|||
* EPSON S1D13806 FB (discontinued chip)
|
||||
* EPSON S1D13506 FB
|
||||
*/
|
||||
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
||||
#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
||||
#include <video/s1d13xxxfb.h>
|
||||
|
||||
|
||||
|
|
|
@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
|
|||
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
|
||||
extern void __init at91_set_serial_console(unsigned portnr);
|
||||
|
||||
struct at91_uart_config {
|
||||
unsigned short console_tty; /* tty number of serial console */
|
||||
unsigned short nr_tty; /* number of serial tty's */
|
||||
short tty_map[]; /* map UART to tty number */
|
||||
};
|
||||
extern struct platform_device *atmel_default_console_device;
|
||||
extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
|
||||
|
||||
struct atmel_uart_data {
|
||||
short use_dma_tx; /* use transmit DMA? */
|
||||
|
|
|
@ -22,4 +22,4 @@
|
|||
* 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
|
||||
* larger physical memory designs better.
|
||||
*/
|
||||
#define VMALLOC_END 0xf0000000
|
||||
#define VMALLOC_END 0xf0000000UL
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
|
|||
{
|
||||
int i;
|
||||
|
||||
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
|
||||
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
|
||||
"imprecise external abort");
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
|
||||
|
|
|
@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = {
|
|||
CLK(NULL, "uart1", &uart1_clk),
|
||||
CLK(NULL, "uart2", &uart2_clk),
|
||||
CLK("i2c_davinci.1", NULL, &i2c_clk),
|
||||
CLK("davinci-asp.0", NULL, &asp0_clk),
|
||||
CLK("davinci-asp.1", NULL, &asp1_clk),
|
||||
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
|
||||
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
|
||||
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
|
||||
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
|
||||
CLK("spi_davinci.0", NULL, &spi0_clk),
|
||||
|
@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = {
|
|||
};
|
||||
|
||||
static struct platform_device dm355_asp1_device = {
|
||||
.name = "davinci-asp",
|
||||
.name = "davinci-mcbsp",
|
||||
.id = 1,
|
||||
.num_resources = ARRAY_SIZE(dm355_asp1_resources),
|
||||
.resource = dm355_asp1_resources,
|
||||
|
|
|
@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = {
|
|||
CLK(NULL, "usb", &usb_clk),
|
||||
CLK("davinci_emac.1", NULL, &emac_clk),
|
||||
CLK("davinci_voicecodec", NULL, &voicecodec_clk),
|
||||
CLK("davinci-asp.0", NULL, &asp0_clk),
|
||||
CLK("davinci-mcbsp", NULL, &asp0_clk),
|
||||
CLK(NULL, "rto", &rto_clk),
|
||||
CLK(NULL, "mjcp", &mjcp_clk),
|
||||
CLK(NULL, NULL, NULL),
|
||||
|
@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = {
|
|||
};
|
||||
|
||||
static struct platform_device dm365_asp_device = {
|
||||
.name = "davinci-asp",
|
||||
.id = 0,
|
||||
.name = "davinci-mcbsp",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(dm365_asp_resources),
|
||||
.resource = dm365_asp_resources,
|
||||
};
|
||||
|
|
|
@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = {
|
|||
CLK("davinci_emac.1", NULL, &emac_clk),
|
||||
CLK("i2c_davinci.1", NULL, &i2c_clk),
|
||||
CLK("palm_bk3710", NULL, &ide_clk),
|
||||
CLK("davinci-asp", NULL, &asp_clk),
|
||||
CLK("davinci-mcbsp", NULL, &asp_clk),
|
||||
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
|
||||
CLK(NULL, "spi", &spi_clk),
|
||||
CLK(NULL, "gpio", &gpio_clk),
|
||||
|
@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = {
|
|||
};
|
||||
|
||||
static struct platform_device dm644x_asp_device = {
|
||||
.name = "davinci-asp",
|
||||
.name = "davinci-mcbsp",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(dm644x_asp_resources),
|
||||
.resource = dm644x_asp_resources,
|
||||
|
|
|
@ -7,4 +7,4 @@
|
|||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#define VMALLOC_END 0xdf000000
|
||||
#define VMALLOC_END 0xdf000000UL
|
||||
|
|
|
@ -7,4 +7,4 @@
|
|||
*/
|
||||
|
||||
|
||||
#define VMALLOC_END 0xf0000000
|
||||
#define VMALLOC_END 0xf0000000UL
|
||||
|
|
|
@ -5,6 +5,6 @@
|
|||
#ifndef __ARCH_ARM_VMALLOC_H
|
||||
#define __ARCH_ARM_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif
|
||||
|
|
|
@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
|
|||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
|
||||
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
|
||||
#define ADS7846_PENDOWN (GPIO_PORTD | 25)
|
||||
|
||||
static void ads7846_dev_init(void)
|
||||
|
@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
|
|||
.get_pendown_state = ads7846_get_pendown_state,
|
||||
.keep_vref_on = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
||||
static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
|
||||
[0] = {
|
||||
.modalias = "ads7846",
|
||||
|
@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
|
|||
.chipselect = eukrea_mbimx27_spi_cs,
|
||||
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
|
||||
{
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -16,7 +16,7 @@
|
|||
#ifndef __ASM_ARCH_MSM_VMALLOC_H
|
||||
#define __ASM_ARCH_MSM_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
|
|||
#define imx25_add_mxc_nand(pdata) \
|
||||
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
|
||||
|
||||
extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
|
||||
extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
|
||||
#define imx25_add_spi_imx(id, pdata) \
|
||||
imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
|
||||
imx_add_spi_imx(&imx25_cspi_data[id], pdata)
|
||||
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
|
||||
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
|
||||
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
|
||||
|
|
|
@ -14,6 +14,7 @@
|
|||
|
||||
#include <mach/common.h>
|
||||
#include <mach/iomux-mx3.h>
|
||||
#include <mach/spi.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
|
@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
|
|||
};
|
||||
|
||||
/* Platform Data for MXC CSPI */
|
||||
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
|
||||
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
|
||||
|
||||
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
|
||||
.chipselect = pcm037_spi1_cs,
|
||||
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
|
||||
};
|
||||
#endif
|
||||
|
||||
/* GPIO-keys input device */
|
||||
static struct gpio_keys_button pcm037_gpio_keys[] = {
|
||||
|
@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static int eet_init_devices(void)
|
||||
static int __init eet_init_devices(void)
|
||||
{
|
||||
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
|
||||
return 0;
|
||||
|
|
|
@ -16,4 +16,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd8000000
|
||||
#define VMALLOC_END 0xd8000000UL
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xf8000000
|
||||
#define VMALLOC_END 0xf8000000UL
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
#include <linux/irq.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void)
|
|||
if (omap_irq_pending())
|
||||
goto no_sleep;
|
||||
|
||||
/* Block console output in case it is on one of the OMAP UARTs */
|
||||
if (try_acquire_console_sem())
|
||||
goto no_sleep;
|
||||
|
||||
omap_uart_prepare_idle(0);
|
||||
omap_uart_prepare_idle(1);
|
||||
omap_uart_prepare_idle(2);
|
||||
|
@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void)
|
|||
omap_uart_resume_idle(1);
|
||||
omap_uart_resume_idle(0);
|
||||
|
||||
release_console_sem();
|
||||
|
||||
no_sleep:
|
||||
if (omap2_pm_debug) {
|
||||
unsigned long long tmp;
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#include <plat/sram.h>
|
||||
#include <plat/clockdomain.h>
|
||||
|
@ -385,6 +386,12 @@ void omap_sram_idle(void)
|
|||
omap3_enable_io_chain();
|
||||
}
|
||||
|
||||
/* Block console output in case it is on one of the OMAP UARTs */
|
||||
if (per_next_state < PWRDM_POWER_ON ||
|
||||
core_next_state < PWRDM_POWER_ON)
|
||||
if (try_acquire_console_sem())
|
||||
goto console_still_active;
|
||||
|
||||
/* PER */
|
||||
if (per_next_state < PWRDM_POWER_ON) {
|
||||
omap_uart_prepare_idle(2);
|
||||
|
@ -463,6 +470,9 @@ void omap_sram_idle(void)
|
|||
omap_uart_resume_idle(3);
|
||||
}
|
||||
|
||||
release_console_sem();
|
||||
|
||||
console_still_active:
|
||||
/* Disable IO-PAD and IO-CHAIN wakeup */
|
||||
if (omap3_has_io_wakeup() &&
|
||||
(per_next_state < PWRDM_POWER_ON ||
|
||||
|
|
|
@ -27,6 +27,7 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#ifdef CONFIG_SERIAL_OMAP
|
||||
#include <plat/omap-serial.h>
|
||||
|
@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
|
|||
struct omap_uart_state *uart;
|
||||
|
||||
list_for_each_entry(uart, &uart_list, node) {
|
||||
if (num == uart->num) {
|
||||
if (num == uart->num && uart->can_sleep) {
|
||||
omap_uart_enable_clocks(uart);
|
||||
|
||||
/* Check for IO pad wakeup */
|
||||
|
@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
|
|||
|
||||
oh->dev_attr = uart;
|
||||
|
||||
acquire_console_sem(); /* in case the earlycon is on the UART */
|
||||
|
||||
/*
|
||||
* Because of early UART probing, UART did not get idled
|
||||
* on init. Now that omap_device is ready, ensure full idle
|
||||
|
@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
|
|||
omap_uart_block_sleep(uart);
|
||||
uart->timeout = DEFAULT_TIMEOUT;
|
||||
|
||||
release_console_sem();
|
||||
|
||||
if ((cpu_is_omap34xx() && uart->padconf) ||
|
||||
(uart->wk_en && uart->wk_mask)) {
|
||||
device_init_wakeup(&od->pdev.dev, true);
|
||||
|
|
|
@ -17,4 +17,4 @@
|
|||
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
|
||||
* area for the same reason. ;)
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -35,5 +35,6 @@ pen: ldr r7, [r6]
|
|||
*/
|
||||
b secondary_startup
|
||||
|
||||
.align
|
||||
1: .long .
|
||||
.long pen_release
|
||||
|
|
|
@ -7,4 +7,4 @@
|
|||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#define VMALLOC_END 0xdc000000
|
||||
#define VMALLOC_END 0xdc000000UL
|
||||
|
|
|
@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
|
|||
|
||||
/* Configures BT serial port GPIOs */
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
|
||||
s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
|
||||
s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
|
||||
|
||||
|
||||
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
|
||||
|
|
|
@ -16,7 +16,7 @@ config CPU_S3C2412
|
|||
config CPU_S3C2412_ONLY
|
||||
bool
|
||||
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
|
||||
!CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
|
||||
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
|
||||
!CPU_S3C2443 && CPU_S3C2412
|
||||
default y if CPU_S3C2412
|
||||
|
||||
|
|
|
@ -35,9 +35,12 @@ menu "S3C2416 Machines"
|
|||
config MACH_SMDK2416
|
||||
bool "SMDK2416"
|
||||
select CPU_S3C2416
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C2416_PM if PM
|
||||
help
|
||||
Say Y here if you are using an SMDK2416
|
||||
|
|
|
@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
|
|||
|
||||
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
|
||||
s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
|
||||
}
|
||||
|
||||
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
|
||||
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
static void s3c2416_irq_uart3_mask(unsigned int irqno)
|
||||
{
|
||||
|
|
|
@ -18,6 +18,7 @@ config CPU_S3C2440
|
|||
config CPU_S3C2442
|
||||
bool
|
||||
select CPU_ARM920T
|
||||
select S3C_GPIO_PULL_DOWN
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_GPIO
|
||||
select S3C2410_PM if PM
|
||||
|
@ -178,6 +179,9 @@ config MACH_MINI2440
|
|||
bool "MINI2440 development board"
|
||||
select CPU_S3C2440
|
||||
select EEPROM_AT24
|
||||
select NEW_LEDS
|
||||
select LEDS_CLASS
|
||||
select LEDS_TRIGGER
|
||||
select LEDS_TRIGGER_BACKLIGHT
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
|
|
|
@ -46,9 +46,6 @@ int __init s3c2440_init(void)
|
|||
{
|
||||
printk("S3C2440: Initialising architecture\n");
|
||||
|
||||
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
|
||||
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
|
||||
|
||||
/* change irq for watchdog */
|
||||
|
||||
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
|
||||
|
@ -58,3 +55,11 @@ int __init s3c2440_init(void)
|
|||
|
||||
return sysdev_register(&s3c2440_sysdev);
|
||||
}
|
||||
|
||||
void __init s3c2440_map_io(void)
|
||||
{
|
||||
s3c244x_map_io();
|
||||
|
||||
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
|
||||
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
|
||||
}
|
||||
|
|
|
@ -32,6 +32,7 @@
|
|||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
|
@ -43,6 +44,11 @@
|
|||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/s3c244x.h>
|
||||
|
||||
#include <plat/gpio-core.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/gpio-cfg-helpers.h>
|
||||
|
||||
/* S3C2442 extended clock support */
|
||||
|
||||
|
@ -163,3 +169,11 @@ int __init s3c2442_init(void)
|
|||
|
||||
return sysdev_register(&s3c2442_sysdev);
|
||||
}
|
||||
|
||||
void __init s3c2442_map_io(void)
|
||||
{
|
||||
s3c244x_map_io();
|
||||
|
||||
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
|
||||
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
|
||||
}
|
||||
|
|
|
@ -5,6 +5,7 @@
|
|||
config CPU_S3C2443
|
||||
bool
|
||||
depends on ARCH_S3C2410
|
||||
select CPU_ARM920T
|
||||
select S3C2443_DMA if S3C2410_DMA
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
|
|
|
@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
|
|||
|
||||
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
|
||||
s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
|
||||
}
|
||||
|
||||
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
|
||||
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
|
||||
|
||||
static void s3c2443_irq_uart3_mask(unsigned int irqno)
|
||||
{
|
||||
|
|
|
@ -45,7 +45,7 @@
|
|||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
|
||||
#define UCON S3C2410_UCON_DEFAULT
|
||||
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
|
||||
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
|
||||
|
||||
|
|
|
@ -46,7 +46,7 @@
|
|||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
|
||||
#define UCON S3C2410_UCON_DEFAULT
|
||||
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
|
||||
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
|
||||
|
||||
|
|
|
@ -13,6 +13,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/sysdev.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
|
|
@ -13,6 +13,7 @@
|
|||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/sysdev.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
/*
|
||||
* arch/arm/mach-shark/include/mach/vmalloc.h
|
||||
*/
|
||||
#define VMALLOC_END 0xd0000000
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
|
|
@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
|
|||
|
||||
/* FSI */
|
||||
#define IRQ_FSI evt2irq(0x1840)
|
||||
static int __fsi_set_rate(struct clk *clk, long rate, int enable)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
static int fsi_set_rate(int is_porta, int rate)
|
||||
if (rate <= 0)
|
||||
return ret;
|
||||
|
||||
if (enable) {
|
||||
ret = clk_set_rate(clk, rate);
|
||||
if (0 == ret)
|
||||
ret = clk_enable(clk);
|
||||
} else {
|
||||
clk_disable(clk);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
|
||||
{
|
||||
return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
|
||||
}
|
||||
|
||||
static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
|
||||
{
|
||||
struct clk *fsia_ick;
|
||||
struct clk *fsiack;
|
||||
int ret = -EIO;
|
||||
|
||||
fsia_ick = clk_get(dev, "icka");
|
||||
if (IS_ERR(fsia_ick))
|
||||
return PTR_ERR(fsia_ick);
|
||||
|
||||
/*
|
||||
* FSIACK is connected to AK4642,
|
||||
* and use external clock pin from it.
|
||||
* it is parent of fsia_ick now.
|
||||
*/
|
||||
fsiack = clk_get_parent(fsia_ick);
|
||||
if (!fsiack)
|
||||
goto fsia_ick_out;
|
||||
|
||||
/*
|
||||
* we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
|
||||
*
|
||||
** FIXME **
|
||||
* Because the freq_table of external clk (fsiack) are all 0,
|
||||
* the return value of clk_round_rate became 0.
|
||||
* So, it use __fsi_set_rate here.
|
||||
*/
|
||||
ret = __fsi_set_rate(fsiack, rate, enable);
|
||||
if (ret < 0)
|
||||
goto fsiack_out;
|
||||
|
||||
ret = __fsi_set_round_rate(fsia_ick, rate, enable);
|
||||
if ((ret < 0) && enable)
|
||||
__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
|
||||
|
||||
fsiack_out:
|
||||
clk_put(fsiack);
|
||||
|
||||
fsia_ick_out:
|
||||
clk_put(fsia_ick);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
|
||||
{
|
||||
struct clk *fsib_clk;
|
||||
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
|
||||
long fsib_rate = 0;
|
||||
long fdiv_rate = 0;
|
||||
int ackmd_bpfmd;
|
||||
int ret;
|
||||
|
||||
/* set_rate is not needed if port A */
|
||||
if (is_porta)
|
||||
return 0;
|
||||
|
||||
fsib_clk = clk_get(NULL, "fsib_clk");
|
||||
if (IS_ERR(fsib_clk))
|
||||
return -EINVAL;
|
||||
|
||||
switch (rate) {
|
||||
case 44100:
|
||||
clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
|
||||
ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
||||
fsib_rate = rate * 256;
|
||||
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
||||
break;
|
||||
case 48000:
|
||||
clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
|
||||
clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
|
||||
ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
||||
fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
|
||||
fdiv_rate = rate * 256;
|
||||
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
|
||||
break;
|
||||
default:
|
||||
pr_err("unsupported rate in FSI2 port B\n");
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* FSI B setting */
|
||||
fsib_clk = clk_get(dev, "ickb");
|
||||
if (IS_ERR(fsib_clk))
|
||||
return -EIO;
|
||||
|
||||
ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
|
||||
clk_put(fsib_clk);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* FSI DIV setting */
|
||||
ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
|
||||
if (ret < 0) {
|
||||
/* disable FSI B */
|
||||
if (enable)
|
||||
__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return ackmd_bpfmd;
|
||||
}
|
||||
|
||||
static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (is_porta)
|
||||
ret = fsi_ak4642_set_rate(dev, rate, enable);
|
||||
else
|
||||
ret = fsi_hdmi_set_rate(dev, rate, enable);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
|
|||
goto out;
|
||||
}
|
||||
|
||||
ret = clk_enable(&sh7372_pllc2_clk);
|
||||
if (ret < 0) {
|
||||
pr_err("Cannot enable pllc2 clock\n");
|
||||
goto out;
|
||||
}
|
||||
pr_debug("PLLC2 set frequency %lu\n", rate);
|
||||
|
||||
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
|
||||
|
@ -896,23 +990,11 @@ out:
|
|||
|
||||
device_initcall(hdmi_init_pm_clock);
|
||||
|
||||
#define FSIACK_DUMMY_RATE 48000
|
||||
static int __init fsi_init_pm_clock(void)
|
||||
{
|
||||
struct clk *fsia_ick;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* FSIACK is connected to AK4642,
|
||||
* and the rate is depend on playing sound rate.
|
||||
* So, set dummy rate (= 48k) here
|
||||
*/
|
||||
ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
|
||||
if (ret < 0) {
|
||||
pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
fsia_ick = clk_get(&fsi_device.dev, "icka");
|
||||
if (IS_ERR(fsia_ick)) {
|
||||
ret = PTR_ERR(fsia_ick);
|
||||
|
@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
|
|||
}
|
||||
|
||||
ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
|
||||
if (ret < 0) {
|
||||
pr_err("Cannot set FSI-A parent: %d\n", ret);
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
|
||||
if (ret < 0)
|
||||
pr_err("Cannot set FSI-A rate: %d\n", ret);
|
||||
pr_err("Cannot set FSI-A parent: %d\n", ret);
|
||||
|
||||
out:
|
||||
clk_put(fsia_ick);
|
||||
|
||||
return ret;
|
||||
|
|
|
@ -220,8 +220,7 @@ static void pllc2_disable(struct clk *clk)
|
|||
__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
|
||||
}
|
||||
|
||||
static int pllc2_set_rate(struct clk *clk,
|
||||
unsigned long rate, int algo_id)
|
||||
static int pllc2_set_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
unsigned long value;
|
||||
int idx;
|
||||
|
@ -230,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk,
|
|||
if (idx < 0)
|
||||
return idx;
|
||||
|
||||
if (rate == clk->parent->rate) {
|
||||
pllc2_disable(clk);
|
||||
return 0;
|
||||
}
|
||||
if (rate == clk->parent->rate)
|
||||
return -EINVAL;
|
||||
|
||||
value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
|
||||
|
||||
if (value & 0x80000000)
|
||||
pllc2_disable(clk);
|
||||
|
||||
__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
|
||||
|
||||
if (value & 0x80000000)
|
||||
return pllc2_enable(clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -453,32 +444,24 @@ static int fsidiv_enable(struct clk *clk)
|
|||
unsigned long value;
|
||||
|
||||
value = __raw_readl(clk->mapping->base) >> 16;
|
||||
if (value < 2) {
|
||||
fsidiv_disable(clk);
|
||||
return -ENOENT;
|
||||
}
|
||||
if (value < 2)
|
||||
return -EIO;
|
||||
|
||||
__raw_writel((value << 16) | 0x3, clk->mapping->base);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fsidiv_set_rate(struct clk *clk,
|
||||
unsigned long rate, int algo_id)
|
||||
static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
int idx;
|
||||
|
||||
if (clk->parent->rate == rate) {
|
||||
fsidiv_disable(clk);
|
||||
return 0;
|
||||
}
|
||||
|
||||
idx = (clk->parent->rate / rate) & 0xffff;
|
||||
if (idx < 2)
|
||||
return -ENOENT;
|
||||
return -EINVAL;
|
||||
|
||||
__raw_writel(idx << 16, clk->mapping->base);
|
||||
return fsidiv_enable(clk);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct clk_ops fsidiv_clk_ops = {
|
||||
|
@ -609,8 +592,6 @@ static struct clk_lookup lookups[] = {
|
|||
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
|
||||
CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
|
||||
CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
|
||||
CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
|
||||
CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
|
||||
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
|
||||
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
|
||||
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
|
||||
|
@ -647,8 +628,8 @@ static struct clk_lookup lookups[] = {
|
|||
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
|
||||
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
|
||||
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
|
||||
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
|
||||
CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
|
||||
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
|
||||
CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
|
||||
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
|
||||
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
|
||||
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
|
||||
|
|
|
@ -21,8 +21,8 @@
|
|||
#include <mach/io.h>
|
||||
|
||||
.macro addruart, rp, rv
|
||||
ldreq \rp, =IO_APB_PHYS @ physical
|
||||
ldrne \rv, =IO_APB_VIRT @ virtual
|
||||
ldr \rp, =IO_APB_PHYS @ physical
|
||||
ldr \rv, =IO_APB_VIRT @ virtual
|
||||
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
|
||||
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
|
||||
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
|
||||
|
|
|
@ -75,14 +75,14 @@ void __init ux500_init_irq(void)
|
|||
static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
|
||||
{
|
||||
/* wait for the operation to complete */
|
||||
while (readl(reg) & mask)
|
||||
while (readl_relaxed(reg) & mask)
|
||||
;
|
||||
}
|
||||
|
||||
static inline void ux500_cache_sync(void)
|
||||
{
|
||||
void __iomem *base = __io_address(UX500_L2CC_BASE);
|
||||
writel(0, base + L2X0_CACHE_SYNC);
|
||||
writel_relaxed(0, base + L2X0_CACHE_SYNC);
|
||||
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
|
||||
}
|
||||
|
||||
|
@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void)
|
|||
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
|
||||
|
||||
/* invalidate all ways */
|
||||
writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
|
||||
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
|
||||
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
|
||||
ux500_cache_sync();
|
||||
}
|
||||
|
|
|
@ -18,4 +18,4 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#define VMALLOC_END 0xd8000000
|
||||
#define VMALLOC_END 0xd8000000UL
|
||||
|
|
|
@ -35,5 +35,6 @@ pen: ldr r7, [r6]
|
|||
*/
|
||||
b secondary_startup
|
||||
|
||||
.align
|
||||
1: .long .
|
||||
.long pen_release
|
||||
|
|
|
@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
|
|||
*/
|
||||
if (pfn_valid(pfn)) {
|
||||
printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
|
||||
KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
|
||||
KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
|
||||
"to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
|
||||
"will fail in the next kernel release. Please fix your driver.\n");
|
||||
WARN_ON(1);
|
||||
}
|
||||
|
||||
|
|
|
@ -381,7 +381,7 @@ __v7_ca9mp_proc_info:
|
|||
PMD_SECT_XN | \
|
||||
PMD_SECT_AP_WRITE | \
|
||||
PMD_SECT_AP_READ
|
||||
b __v7_ca9mp_setup
|
||||
W(b) __v7_ca9mp_setup
|
||||
.long cpu_arch_name
|
||||
.long cpu_elf_name
|
||||
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
|
||||
|
@ -413,7 +413,7 @@ __v7_proc_info:
|
|||
PMD_SECT_XN | \
|
||||
PMD_SECT_AP_WRITE | \
|
||||
PMD_SECT_AP_READ
|
||||
b __v7_setup
|
||||
W(b) __v7_setup
|
||||
.long cpu_arch_name
|
||||
.long cpu_elf_name
|
||||
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
|
||||
|
|
|
@ -18,6 +18,7 @@
|
|||
#include <linux/time.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/clockchips.h>
|
||||
|
@ -36,7 +37,7 @@
|
|||
/*
|
||||
* IOP clocksource (free-running timer 1).
|
||||
*/
|
||||
static cycle_t iop_clocksource_read(struct clocksource *unused)
|
||||
static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
|
||||
{
|
||||
return 0xffffffffu - read_tcr1();
|
||||
}
|
||||
|
|
|
@ -12,15 +12,7 @@
|
|||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/devices-common.h>
|
||||
#ifdef SDMA_IS_MERGED
|
||||
#include <mach/sdma.h>
|
||||
#else
|
||||
struct sdma_platform_data {
|
||||
int sdma_version;
|
||||
char *cpu_name;
|
||||
int to_version;
|
||||
};
|
||||
#endif
|
||||
|
||||
struct imx_imx_sdma_data {
|
||||
resource_size_t iobase;
|
||||
|
|
|
@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
|
|||
imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
|
||||
imx21_cspi_data_entry(0, 1),
|
||||
imx21_cspi_data_entry(1, 2),
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ARCH_MX25
|
||||
|
|
|
@ -3,6 +3,7 @@
|
|||
*
|
||||
* Copyright (C) 2008 STMicroelectronics
|
||||
* Copyright (C) 2010 Alessandro Rubini
|
||||
* Copyright (C) 2010 Linus Walleij for ST-Ericsson
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2, as
|
||||
|
@ -16,11 +17,13 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/cnt32_to_63.h>
|
||||
#include <linux/timer.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#include <plat/mtu.h>
|
||||
|
||||
void __iomem *mtu_base; /* ssigned by machine code */
|
||||
void __iomem *mtu_base; /* Assigned by machine code */
|
||||
|
||||
/*
|
||||
* Kernel assumes that sched_clock can be called early
|
||||
|
@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = {
|
|||
/*
|
||||
* Override the global weak sched_clock symbol with this
|
||||
* local implementation which uses the clocksource to get some
|
||||
* better resolution when scheduling the kernel. We accept that
|
||||
* this wraps around for now, since it is just a relative time
|
||||
* stamp. (Inspired by OMAP implementation.)
|
||||
* better resolution when scheduling the kernel.
|
||||
*
|
||||
* Because the hardware timer period may be quite short
|
||||
* (32.3 secs on the 133 MHz MTU timer selection on ux500)
|
||||
* and because cnt32_to_63() needs to be called at least once per
|
||||
* half period to work properly, a kernel keepwarm() timer is set up
|
||||
* to ensure this requirement is always met.
|
||||
*
|
||||
* Also the sched_clock timer will wrap around at some point,
|
||||
* here we set it to run continously for a year.
|
||||
*/
|
||||
#define SCHED_CLOCK_MIN_WRAP 3600*24*365
|
||||
static struct timer_list cnt32_to_63_keepwarm_timer;
|
||||
static u32 sched_mult;
|
||||
static u32 sched_shift;
|
||||
|
||||
unsigned long long notrace sched_clock(void)
|
||||
{
|
||||
return clocksource_cyc2ns(nmdk_clksrc.read(
|
||||
&nmdk_clksrc),
|
||||
nmdk_clksrc.mult,
|
||||
nmdk_clksrc.shift);
|
||||
u64 cycles;
|
||||
|
||||
if (unlikely(!mtu_base))
|
||||
return 0;
|
||||
|
||||
cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
|
||||
/*
|
||||
* sched_mult is guaranteed to be even so will
|
||||
* shift out bit 63
|
||||
*/
|
||||
return (cycles * sched_mult) >> sched_shift;
|
||||
}
|
||||
|
||||
/* Just kick sched_clock every so often */
|
||||
static void cnt32_to_63_keepwarm(unsigned long data)
|
||||
{
|
||||
mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
|
||||
(void) sched_clock();
|
||||
}
|
||||
|
||||
/*
|
||||
* Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
|
||||
* once in half a 32bit timer wrap interval.
|
||||
*/
|
||||
static void __init nmdk_sched_clock_init(unsigned long rate)
|
||||
{
|
||||
u32 v;
|
||||
unsigned long delta;
|
||||
u64 days;
|
||||
|
||||
/* Find the apropriate mult and shift factors */
|
||||
clocks_calc_mult_shift(&sched_mult, &sched_shift,
|
||||
rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
|
||||
/* We need to multiply by an even number to get rid of bit 63 */
|
||||
if (sched_mult & 1)
|
||||
sched_mult++;
|
||||
|
||||
/* Let's see what we get, take max counter and scale it */
|
||||
days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
|
||||
do_div(days, NSEC_PER_SEC);
|
||||
do_div(days, (3600*24));
|
||||
|
||||
pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
|
||||
(64 - sched_shift), rate, (unsigned long) days);
|
||||
|
||||
/*
|
||||
* Program a timer to kick us at half 32bit wraparound
|
||||
* Formula: seconds per wrap = (2^32) / f
|
||||
*/
|
||||
v = 0xFFFFFFFFUL / rate;
|
||||
/* We want half of the wrap time to keep cnt32_to_63 warm */
|
||||
v /= 2;
|
||||
pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
|
||||
"initialize keepwarm timer every %d seconds\n", rate, v);
|
||||
/* Convert seconds to jiffies */
|
||||
delta = msecs_to_jiffies(v*1000);
|
||||
setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
|
||||
mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
|
||||
}
|
||||
|
||||
/* Clockevent device: use one-shot mode */
|
||||
|
@ -161,13 +230,15 @@ void __init nmdk_timer_init(void)
|
|||
writel(0, mtu_base + MTU_BGLR(0));
|
||||
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
|
||||
|
||||
/* Now the scheduling clock is ready */
|
||||
/* Now the clock source is ready */
|
||||
nmdk_clksrc.read = nmdk_read_timer;
|
||||
|
||||
if (clocksource_register(&nmdk_clksrc))
|
||||
pr_err("timer: failed to initialize clock source %s\n",
|
||||
nmdk_clksrc.name);
|
||||
|
||||
nmdk_sched_clock_init(rate);
|
||||
|
||||
/* Timer 1 is used for events */
|
||||
|
||||
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
|
||||
|
|
|
@ -17,6 +17,9 @@
|
|||
/* Require clock free running */
|
||||
#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
|
||||
|
||||
/* Board design supports 8-bit data on SD/SDIO BUS */
|
||||
#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
|
||||
|
||||
/*
|
||||
* struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
|
||||
* @max_speed: the maximum speed supported
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue