Merge branch 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/soc

* 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: (234 commits)
  ARM: shmobile: remove additional __io() macro use
  ARM: mach-shmobile: default to no earlytimer
  ARM: mach-shmobile: r8a7779 and Marzen timer rework
  ARM: mach-shmobile: r8a7740 and Bonito timer rework
  ARM: mach-shmobile: sh73a0, AG5EVM and Kota2 timer rework
  ARM: mach-shmobile: sh7372, AP4EVB and Mackerel timer rework
  ARM: mach-shmobile: sh7377 and G4EVM timer rework
  ARM: mach-shmobile: sh7367 and G3EVM timer rework
  ARM: mach-shmobile: add shmobile_earlytimer_init()
  ARM: mach-shmobile: Move sh7372 AP4EVB external clk setup
  ARM: mach-shmobile: Move sh7372 Mackerel external clk setup
  ARM: mach-shmobile: rename clk_init() to shmobile_clk_init()
  ARM: mach-shmobile: r8a7779 L2 cache support
  ARM: mach-shmobile: r8a7779 map_io and init_early update
  ARM: mach-shmobile: r8a7740 map_io and init_early update
  ARM: mach-shmobile: sh73a0 map_io and init_early update
  ARM: mach-shmobile: sh7372 map_io and init_early update
  ARM: mach-shmobile: sh7377 map_io and init_early update
  ARM: mach-shmobile: sh7367 map_io and init_early update
  sh: remove clk_ops
  ...

  (includes an update to v3.3-rc7)

Conflicts:
	arch/arm/mach-omap2/id.c

Documentation/devicetree/bindings/gpio/led.txt

@@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
-  low LEDs should be indicated using flags in the GPIO specifier.
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -30,6 +30,7 @@ national	National Semiconductor
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International

Documentation/hwmon/jc42

@@ -7,21 +7,29 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
+  * Atmel AT30TS00
-    Prefix: 'tse2002b3', 'ts3000b3'
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
+	http://www.atmel.com/Images/doc8585.pdf
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@ Supported chips:
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f

Documentation/input/alps.txt

@@ -13,7 +13,8 @@ Detection
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -962,7 +962,7 @@ F:	drivers/tty/serial/msm_serial.c
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1310,7 +1310,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1318,7 +1318,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/Kconfig

@@ -1281,7 +1281,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer

arch/arm/boot/.gitignore

@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb

arch/arm/include/asm/pmu.h

@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,

arch/arm/kernel/ecard.c

@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

arch/arm/kernel/perf_event.c

@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");

arch/arm/kernel/perf_event_v6.c

@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_v7.c

@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_xscale.c

@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+#if defined(CONFIG_OF)
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+	struct device_node *of_node =
-	platform_device_register(&at_hdmac_device);
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {

arch/arm/mach-omap2/id.c

@@ -396,6 +396,7 @@ void __init omap3xxx_check_revision(void)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/mailbox.c

@@ -420,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-/* must be ready before omap3isp is probed */
+module_init(omap2_mbox_init);
-subsys_initcall(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");

arch/arm/mach-omap2/omap-iommu.c

@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

arch/arm/mach-omap2/omap4-common.c

@@ -31,6 +31,7 @@
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)

arch/arm/mach-omap2/twl-common.c

@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE

arch/arm/mach-pxa/generic.h

@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration

arch/arm/mach-pxa/pxa25x.c

@@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -367,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,

arch/arm/mach-pxa/pxa27x.c

@@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -455,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa3xx.c

@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa95x.c

@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-s3c2440/common.h

@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

arch/arm/mach-s3c2440/mach-anubis.c

@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-gta02.c

@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-osiris.c

@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx1950.c

@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx3715.c

@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-smdk2440.c

@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/s3c2440.c

@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}

arch/arm/mach-s3c2440/s3c244x.c

@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}

arch/arm/mach-shmobile/board-ag5evm.c

@@ -46,8 +46,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
@@ -486,27 +484,6 @@ static struct platform_device *ag5evm_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-static struct map_desc ag5evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init ag5evm_map_io(void)
-{
-	iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh73a0_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init ag5evm_init(void)
 {
 	sh73a0_pinmux_init();
@@ -622,22 +599,12 @@ static void __init ag5evm_init(void)
 	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
 }
 
-static void __init ag5evm_timer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer ag5evm_timer = {
-	.init	= ag5evm_timer_init,
-};
-
 MACHINE_START(AG5EVM, "ag5evm")
-	.map_io		= ag5evm_map_io,
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
-	.timer		= &ag5evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-ap4evb.c

@@ -61,8 +61,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/setup.h>
 
 /*
@@ -1190,27 +1188,6 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
-static struct map_desc ap4evb_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init ap4evb_map_io(void)
-{
-	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7372_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
 #define USCCR1		0xE6058144
@@ -1219,6 +1196,9 @@ static void __init ap4evb_init(void)
 	u32 srcr4;
 	struct clk *clk;
 
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -1455,23 +1435,11 @@ static void __init ap4evb_init(void)
 	pm_clk_add(&lcdc1_device.dev, "hdmi");
 }
 
-static void __init ap4evb_timer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_timer.init();
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer ap4evb_timer = {
-	.init		= ap4evb_timer_init,
-};
-
 MACHINE_START(AP4EVB, "ap4evb")
-	.map_io		= ap4evb_map_io,
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
-	.timer		= &ap4evb_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-bonito.c

@@ -327,28 +327,6 @@ static struct platform_device *bonito_base_devices[] __initdata = {
  * map I/O
  */
 static struct map_desc bonito_io_desc[] __initdata = {
-	 /*
-	  * for CPGA/INTC/PFC
-	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
-	  */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 160 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * for l2x0_init()
-	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
-	 */
-	{
-		.virtual	= 0xf0002000,
-		.pfn		= __phys_to_pfn(0xf0100000),
-		.length		= PAGE_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#endif
 	/*
 	 * for FPGA (0x1800000-0x19ffffff)
 	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
@@ -363,11 +341,8 @@ static struct map_desc bonito_io_desc[] __initdata = {
 
 static void __init bonito_map_io(void)
 {
+	r8a7740_map_io();
 	iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
-
-	/* setup early devices and console here as well */
-	r8a7740_add_early_devices();
-	shmobile_setup_console();
 }
 
 /*
@@ -491,7 +466,7 @@ static void __init bonito_init(void)
 	}
 }
 
-static void __init bonito_timer_init(void)
+static void __init bonito_earlytimer_init(void)
 {
 	u16 val;
 	u8 md_ck = 0;
@@ -506,17 +481,22 @@ static void __init bonito_timer_init(void)
 		md_ck |= MD_CK0;
 
 	r8a7740_clock_init(md_ck);
-	shmobile_timer.init();
+	shmobile_earlytimer_init();
 }
 
-struct sys_timer bonito_timer = {
+void __init bonito_add_early_devices(void)
-	.init	= bonito_timer_init,
+{
-};
+	r8a7740_add_early_devices();
+
+	/* override timer setup with board-specific code */
+	shmobile_timer.init = bonito_earlytimer_init;
+}
 
 MACHINE_START(BONITO, "bonito")
 	.map_io		= bonito_map_io,
+	.init_early	= bonito_add_early_devices,
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= bonito_init,
-	.timer		= &bonito_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-g3evm.c

@@ -37,8 +37,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 /*
  * IrDA
@@ -246,27 +244,6 @@ static struct platform_device *g3evm_devices[] __initdata = {
 	&irda_device,
 };
 
-static struct map_desc g3evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init g3evm_map_io(void)
-{
-	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7367_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init g3evm_init(void)
 {
 	sh7367_pinmux_init();
@@ -354,20 +331,11 @@ static void __init g3evm_init(void)
 	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
 }
 
-static void __init g3evm_timer_init(void)
-{
-	sh7367_clock_init();
-	shmobile_timer.init();
-}
-
-static struct sys_timer g3evm_timer = {
-	.init		= g3evm_timer_init,
-};
-
 MACHINE_START(G3EVM, "g3evm")
-	.map_io		= g3evm_map_io,
+	.map_io		= sh7367_map_io,
+	.init_early	= sh7367_add_early_devices,
 	.init_irq	= sh7367_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g3evm_init,
-	.timer		= &g3evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-g4evm.c

@@ -38,8 +38,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 /*
  * SDHI
@@ -260,27 +258,6 @@ static struct platform_device *g4evm_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-static struct map_desc g4evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init g4evm_map_io(void)
-{
-	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7377_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_SDHID0_D0	0xe60520fc
 #define GPIO_SDHID0_D1	0xe60520fd
 #define GPIO_SDHID0_D2	0xe60520fe
@@ -397,20 +374,11 @@ static void __init g4evm_init(void)
 	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
 }
 
-static void __init g4evm_timer_init(void)
-{
-	sh7377_clock_init();
-	shmobile_timer.init();
-}
-
-static struct sys_timer g4evm_timer = {
-	.init		= g4evm_timer_init,
-};
-
 MACHINE_START(G4EVM, "g4evm")
-	.map_io		= g4evm_map_io,
+	.map_io		= sh7377_map_io,
+	.init_early	= sh7377_add_early_devices,
 	.init_irq	= sh7377_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g4evm_init,
-	.timer		= &g4evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-kota2.c

@@ -43,7 +43,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -409,27 +408,6 @@ static struct platform_device *kota2_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-static struct map_desc kota2_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init kota2_map_io(void)
-{
-	iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
-
-	/* setup early devices and console here as well */
-	sh73a0_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init kota2_init(void)
 {
 	sh73a0_pinmux_init();
@@ -535,22 +513,12 @@ static void __init kota2_init(void)
 	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
 }
 
-static void __init kota2_timer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer kota2_timer = {
-	.init	= kota2_timer_init,
-};
-
 MACHINE_START(KOTA2, "kota2")
-	.map_io		= kota2_map_io,
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
-	.timer		= &kota2_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-mackerel.c

@@ -57,8 +57,6 @@
 #include <mach/sh7372.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
 /*
@@ -1337,27 +1335,6 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
-static struct map_desc mackerel_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init mackerel_map_io(void)
-{
-	iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7372_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
 #define GPIO_PORT167CR	0xE60520A7
@@ -1370,6 +1347,9 @@ static void __init mackerel_init(void)
 	struct clk *clk;
 	int ret;
 
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -1573,23 +1553,11 @@ static void __init mackerel_init(void)
 	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
 }
 
-static void __init mackerel_timer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_timer.init();
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer mackerel_timer = {
-	.init		= mackerel_timer_init,
-};
-
 MACHINE_START(MACKEREL, "mackerel")
-	.map_io		= mackerel_map_io,
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
-	.timer		= &mackerel_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/board-marzen.c

@@ -33,8 +33,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
@@ -72,49 +70,6 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 };
 
-static struct map_desc marzen_io_desc[] __initdata = {
-	/* 2M entity map for 0xf0000000 (MPCORE) */
-	{
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xf0000000),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
-	{
-		.virtual	= 0xfe000000,
-		.pfn		= __phys_to_pfn(0xfe000000),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init marzen_map_io(void)
-{
-	iotable_init(marzen_io_desc, ARRAY_SIZE(marzen_io_desc));
-}
-
-static void __init marzen_init_early(void)
-{
-	r8a7779_add_early_devices();
-
-	/* Early serial console setup is not included here due to
-	 * memory map collisions. The SCIF serial ports in r8a7779
-	 * are difficult to entity map 1:1 due to collision with the
-	 * virtual memory range used by the coherent DMA code on ARM.
-	 *
-	 * Anyone wanting to debug early can remove UPF_IOREMAP from
-	 * the sh-sci serial console platform data, adjust mapbase
-	 * to a static M:N virt:phys mapping that needs to be added to
-	 * the mappings passed with iotable_init() above.
-	 *
-	 * Then add a call to shmobile_setup_console() from this function.
-	 *
-	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
-	 * command line.
-	 */
-}
-
 static void __init marzen_init(void)
 {
 	r8a7779_pinmux_init();
@@ -135,23 +90,12 @@ static void __init marzen_init(void)
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 
-static void __init marzen_timer_init(void)
-{
-	r8a7779_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer marzen_timer = {
-	.init	= marzen_timer_init,
-};
-
 MACHINE_START(MARZEN, "marzen")
-	.map_io		= marzen_map_io,
+	.map_io		= r8a7779_map_io,
-	.init_early	= marzen_init_early,
+	.init_early	= r8a7779_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
-	.timer		= &marzen_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END

arch/arm/mach-shmobile/clock-r8a7740.c

@@ -93,7 +93,7 @@ static unsigned long div_recalc(struct clk *clk)
 	return clk->parent->rate / (int)(clk->priv);
 }
 
-static struct clk_ops div_clk_ops = {
+static struct sh_clk_ops div_clk_ops = {
 	.recalc	= div_recalc,
 };
 
@@ -125,7 +125,7 @@ static struct clk extal2_div2_clk = {
 	.parent	= &extal2_clk,
 };
 
-static struct clk_ops followparent_clk_ops = {
+static struct sh_clk_ops followparent_clk_ops = {
 	.recalc	= followparent_recalc,
 };
 
@@ -156,7 +156,7 @@ static unsigned long pllc01_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc01_clk_ops = {
+static struct sh_clk_ops pllc01_clk_ops = {
 	.recalc		= pllc01_recalc,
 };
 
@@ -376,7 +376,7 @@ void __init r8a7740_clock_init(u8 md_ck)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup r8a7740 clocks\n");
 }

arch/arm/mach-shmobile/clock-r8a7779.c

@@ -107,7 +107,7 @@ static unsigned long mul4_recalc(struct clk *clk)
 	return clk->parent->rate * 4;
 }
 
-static struct clk_ops mul4_clk_ops = {
+static struct sh_clk_ops mul4_clk_ops = {
 	.recalc		= mul4_recalc,
 };
 
@@ -170,7 +170,7 @@ void __init r8a7779_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup r8a7779 clocks\n");
 }

arch/arm/mach-shmobile/clock-sh7367.c

@@ -74,7 +74,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -101,7 +101,7 @@ static unsigned long pllc1_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc1_clk_ops = {
+static struct sh_clk_ops pllc1_clk_ops = {
 	.recalc		= pllc1_recalc,
 };
 
@@ -128,7 +128,7 @@ static unsigned long pllc2_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 };
 
@@ -349,7 +349,7 @@ void __init sh7367_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7367 clocks\n");
 }

arch/arm/mach-shmobile/clock-sh7372.c

@@ -89,7 +89,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -128,7 +128,7 @@ static unsigned long pllc01_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc01_clk_ops = {
+static struct sh_clk_ops pllc01_clk_ops = {
 	.recalc		= pllc01_recalc,
 };
 
@@ -276,7 +276,7 @@ static int pllc2_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 	.round_rate	= pllc2_round_rate,
 	.set_rate	= pllc2_set_rate,
@@ -468,7 +468,7 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static struct clk_ops fsidiv_clk_ops = {
+static struct sh_clk_ops fsidiv_clk_ops = {
 	.recalc		= fsidiv_recalc,
 	.round_rate	= fsidiv_round_rate,
 	.set_rate	= fsidiv_set_rate,
@@ -710,7 +710,7 @@ void __init sh7372_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7372 clocks\n");
 

arch/arm/mach-shmobile/clock-sh7377.c

@@ -77,7 +77,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -110,7 +110,7 @@ static unsigned long pllc1_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc1_clk_ops = {
+static struct sh_clk_ops pllc1_clk_ops = {
 	.recalc		= pllc1_recalc,
 };
 
@@ -137,7 +137,7 @@ static unsigned long pllc2_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 };
 
@@ -360,7 +360,7 @@ void __init sh7377_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7377 clocks\n");
 }

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -88,7 +88,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -97,7 +97,7 @@ static unsigned long div7_recalc(struct clk *clk)
 	return clk->parent->rate / 7;
 }
 
-static struct clk_ops div7_clk_ops = {
+static struct sh_clk_ops div7_clk_ops = {
 	.recalc		= div7_recalc,
 };
 
@@ -106,7 +106,7 @@ static unsigned long div13_recalc(struct clk *clk)
 	return clk->parent->rate / 13;
 }
 
-static struct clk_ops div13_clk_ops = {
+static struct sh_clk_ops div13_clk_ops = {
 	.recalc		= div13_recalc,
 };
 
@@ -122,7 +122,7 @@ static struct clk extal2_div2_clk = {
 	.parent		= &sh73a0_extal2_clk,
 };
 
-static struct clk_ops main_clk_ops = {
+static struct sh_clk_ops main_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
@@ -156,7 +156,7 @@ static unsigned long pll_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
@@ -438,7 +438,7 @@ static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static struct clk_ops dsiphy_clk_ops = {
+static struct sh_clk_ops dsiphy_clk_ops = {
 	.recalc		= dsiphy_recalc,
 	.round_rate	= dsiphy_round_rate,
 	.set_rate	= dsiphy_set_rate,
@@ -620,7 +620,7 @@ void __init sh73a0_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh73a0 clocks\n");
 }

arch/arm/mach-shmobile/clock.c

@@ -24,7 +24,7 @@
 #include <linux/sh_clk.h>
 #include <linux/export.h>
 
-int __init clk_init(void)
+int __init shmobile_clk_init(void)
 {
 	/* Kick the child clocks.. */
 	recalculate_root_clocks();

arch/arm/mach-shmobile/include/mach/common.h

@@ -1,12 +1,13 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
+extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
 struct clk;
-extern int clk_init(void);
+extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
@@ -14,6 +15,7 @@ extern void (*shmobile_cpuidle_modes[])(void);
 extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
+extern void sh7367_map_io(void);
 extern void sh7367_add_early_devices(void);
 extern void sh7367_add_standard_devices(void);
 extern void sh7367_clock_init(void);
@@ -22,6 +24,7 @@ extern struct clk sh7367_extalb1_clk;
 extern struct clk sh7367_extal2_clk;
 
 extern void sh7377_init_irq(void);
+extern void sh7377_map_io(void);
 extern void sh7377_add_early_devices(void);
 extern void sh7377_add_standard_devices(void);
 extern void sh7377_clock_init(void);
@@ -30,6 +33,7 @@ extern struct clk sh7377_extalc1_clk;
 extern struct clk sh7377_extal2_clk;
 
 extern void sh7372_init_irq(void);
+extern void sh7372_map_io(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
 extern void sh7372_clock_init(void);
@@ -41,6 +45,7 @@ extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
 extern void sh73a0_init_irq(void);
+extern void sh73a0_map_io(void);
 extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
@@ -56,12 +61,14 @@ extern int sh73a0_boot_secondary(unsigned int cpu);
 extern void sh73a0_smp_prepare_cpus(void);
 
 extern void r8a7740_init_irq(void);
+extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
 extern void r8a7740_add_standard_devices(void);
 extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
 
 extern void r8a7779_init_irq(void);
+extern void r8a7779_map_io(void);
 extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_clock_init(void);

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -25,8 +25,41 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/r8a7740.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc r8a7740_io_desc[] __initdata = {
+	 /*
+	  * for CPGA/INTC/PFC
+	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
+	  */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 160 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * for l2x0_init()
+	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
+	 */
+	{
+		.virtual	= 0xf0002000,
+		.pfn		= __phys_to_pfn(0xf0100000),
+		.length		= PAGE_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+#endif
+};
+
+void __init r8a7740_map_io(void)
+{
+	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -345,8 +378,20 @@ void __init r8a7740_add_standard_devices(void)
 			     ARRAY_SIZE(r8a7740_late_devices));
 }
 
+static void __init r8a7740_earlytimer_init(void)
+{
+	r8a7740_clock_init(0);
+	shmobile_earlytimer_init();
+}
+
 void __init r8a7740_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7740_early_devices,
 				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = r8a7740_earlytimer_init;
 }

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -33,6 +33,31 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static struct map_desc r8a7779_io_desc[] __initdata = {
+	/* 2M entity map for 0xf0000000 (MPCORE) */
+	{
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0xf0000000),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
+	{
+		.virtual	= 0xfe000000,
+		.pfn		= __phys_to_pfn(0xfe000000),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init r8a7779_map_io(void)
+{
+	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
+}
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xffe40000,
@@ -219,6 +244,10 @@ static struct platform_device *r8a7779_late_devices[] __initdata = {
 
 void __init r8a7779_add_standard_devices(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
+	l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+#endif
 	r8a7779_pm_init();
 
 	r8a7779_init_pm_domain(&r8a7779_sh4a);
@@ -232,8 +261,33 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+static void __init r8a7779_earlytimer_init(void)
+{
+	r8a7779_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init r8a7779_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7779_early_devices,
 				   ARRAY_SIZE(r8a7779_early_devices));
+
+	/* Early serial console setup is not included here due to
+	 * memory map collisions. The SCIF serial ports in r8a7779
+	 * are difficult to entity map 1:1 due to collision with the
+	 * virtual memory range used by the coherent DMA code on ARM.
+	 *
+	 * Anyone wanting to debug early can remove UPF_IOREMAP from
+	 * the sh-sci serial console platform data, adjust mapbase
+	 * to a static M:N virt:phys mapping that needs to be added to
+	 * the mappings passed with iotable_init() above.
+	 *
+	 * Then add a call to shmobile_setup_console() from this function.
+	 *
+	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
+	 * command line in case of the marzen board.
+	 */
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = r8a7779_earlytimer_init;
 }

arch/arm/mach-shmobile/setup-sh7367.c

@@ -29,8 +29,28 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7367_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7367_map_io(void)
+{
+	iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -435,6 +455,12 @@ void __init sh7367_add_standard_devices(void)
 			    ARRAY_SIZE(sh7367_devices));
 }
 
+static void __init sh7367_earlytimer_init(void)
+{
+	sh7367_clock_init();
+	shmobile_earlytimer_init();
+}
+
 #define SYMSTPCR2 0xe6158048
 #define SYMSTPCR2_CMT1 (1 << 29)
 
@@ -445,4 +471,10 @@ void __init sh7367_add_early_devices(void)
 
 	early_platform_add_devices(sh7367_early_devices,
 				   ARRAY_SIZE(sh7367_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7367_earlytimer_init;
 }

arch/arm/mach-shmobile/setup-sh7372.c

@@ -33,8 +33,28 @@
 #include <linux/pm_domain.h>
 #include <mach/hardware.h>
 #include <mach/sh7372.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7372_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7372_map_io(void)
+{
+	iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -1045,8 +1065,20 @@ void __init sh7372_add_standard_devices(void)
 	sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device);
 }
 
+static void __init sh7372_earlytimer_init(void)
+{
+	sh7372_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init sh7372_add_early_devices(void)
 {
 	early_platform_add_devices(sh7372_early_devices,
 				   ARRAY_SIZE(sh7372_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7372_earlytimer_init;
 }

arch/arm/mach-shmobile/setup-sh7377.c

@@ -30,8 +30,28 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7377_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7377_map_io(void)
+{
+	iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -456,6 +476,12 @@ void __init sh7377_add_standard_devices(void)
 			    ARRAY_SIZE(sh7377_devices));
 }
 
+static void __init sh7377_earlytimer_init(void)
+{
+	sh7377_clock_init();
+	shmobile_earlytimer_init();
+}
+
 #define SMSTPCR3 0xe615013c
 #define SMSTPCR3_CMT1 (1 << 29)
 
@@ -466,4 +492,10 @@ void __init sh7377_add_early_devices(void)
 
 	early_platform_add_devices(sh7377_early_devices,
 				   ARRAY_SIZE(sh7377_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7377_earlytimer_init;
 }

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -32,8 +32,28 @@
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
 #include <mach/sh73a0.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh73a0_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh73a0_map_io(void)
+{
+	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
+}
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
@@ -667,8 +687,20 @@ void __init sh73a0_add_standard_devices(void)
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+static void __init sh73a0_earlytimer_init(void)
+{
+	sh73a0_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init sh73a0_add_early_devices(void)
 {
 	early_platform_add_devices(sh73a0_early_devices,
 				   ARRAY_SIZE(sh73a0_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh73a0_earlytimer_init;
 }

arch/arm/mach-shmobile/timer.c

@@ -36,11 +36,15 @@ static void __init shmobile_late_time_init(void)
 	early_platform_driver_probe("earlytimer", 2, 0);
 }
 
-static void __init shmobile_timer_init(void)
+void __init shmobile_earlytimer_init(void)
 {
 	late_time_init = shmobile_late_time_init;
 }
 
+static void __init shmobile_timer_init(void)
+{
+}
+
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };

arch/arm/mach-ux500/Kconfig

@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 

arch/arm/mach-vexpress/Kconfig

@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 

arch/arm/mm/proc-v7.S

@@ -230,9 +230,7 @@ __v7_setup:
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
+	teq	r5, #0x00200000			@ only present in r2p*
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register

arch/arm/plat-omap/include/plat/irqs.h

@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 

arch/arm/plat-s3c24xx/dma.c

@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 

arch/arm/plat-samsung/devs.c

@@ -1456,7 +1456,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 

arch/arm/plat-spear/time.c

@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 

arch/c6x/include/asm/processor.h

@@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
 
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)	(task_pt_regs(task)->pc)
+#define KSTK_EIP(task)	(task_pt_regs(task)->pc)
-#define	KSTK_ESP(tsk)	(task_pt_regs(task)->sp)
+#define KSTK_ESP(task)	(task_pt_regs(task)->sp)
 
 #define cpu_relax()		do { } while (0)
 

arch/mips/alchemy/common/time.c

@@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);	/* ~0.28ms */
 	clockevents_register_device(cd);
 	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 

arch/mips/ath79/dev-wmac.c

@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
-	if (soc_is_ar933x())
+	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
 	else
 		BUG();

arch/mips/configs/nlm_xlp_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_SECCOMP is not set
 CONFIG_USE_OF=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_CGROUPS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_LZMA=y

arch/mips/configs/nlm_xlr_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_KEXEC=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y

arch/mips/configs/powertv_defconfig

@@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=16

arch/mips/include/asm/mach-au1x00/gpio-au1300.h

@@ -11,6 +11,9 @@
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
+struct gpio;
+struct gpio_chip;
+
 /* with the current GPIC design, up to 128 GPIOs are possible.
  * The only implementation so far is in the Au1300, which has 75 externally
  * available GPIOs.
@@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
 	return 0;
 }
 
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
 {
 }
 

arch/mips/include/asm/page.h

@@ -39,9 +39,6 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-#  define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
 #define HPAGE_SHIFT	({BUILD_BUG(); 0; })
 #define HPAGE_SIZE	({BUILD_BUG(); 0; })
 #define HPAGE_MASK	({BUILD_BUG(); 0; })

arch/mips/kernel/smp-bmips.c

@@ -8,7 +8,6 @@
  * SMP support for BMIPS
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/mips/kernel/traps.c

@@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
 		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
 		break;
 	default:
 		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",

arch/mips/kernel/vmlinux.lds.S

@@ -69,7 +69,6 @@ SECTIONS
 	RODATA
 
 	/* writeable */
-	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 

arch/mips/mm/fault.c

@@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+						 (write ? FAULT_FLAG_WRITE : 0);
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,7 +147,11 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -153,12 +160,27 @@ good_area:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
+		if (fault & VM_FAULT_MAJOR) {
-		tsk->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
-	} else {
+						  regs, address);
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+			tsk->maj_flt++;
-		tsk->min_flt++;
+		} else {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+						  regs, address);
+			tsk->min_flt++;
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 
 	up_read(&mm->mmap_sem);

arch/mips/pci/pci.c

@@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
-	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
 	if (pci_probe_only && dev &&
@@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 		pcibios_fixup_device_resources(dev, bus);
 	}
 
-	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+	list_for_each_entry(dev, &bus->devices, bus_list) {
-		dev = pci_dev_b(ln);
-
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}

arch/mips/pmc-sierra/yosemite/ht-irq.c

@@ -35,16 +35,6 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-	}
-
 	/*
 	 * PLX and SPKT related changes go here
 	 */

arch/mips/txx9/generic/7segled.c

@@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
 			break;
 		}
 		dev->id = i;
-		dev->dev = &tx_7segled_subsys;
+		dev->bus = &tx_7segled_subsys;
 		error = device_register(dev);
 		if (!error) {
 			device_create_file(dev, &dev_attr_ascii);

arch/sh/boards/mach-highlander/setup.c

@@ -322,7 +322,7 @@ static void ivdr_clk_disable(struct clk *clk)
 	__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
 }
 
-static struct clk_ops ivdr_clk_ops = {
+static struct sh_clk_ops ivdr_clk_ops = {
 	.enable		= ivdr_clk_enable,
 	.disable	= ivdr_clk_disable,
 };

arch/sh/boards/mach-sdk7786/setup.c

@@ -167,7 +167,7 @@ static void sdk7786_pcie_clk_disable(struct clk *clk)
 	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
 }
 
-static struct clk_ops sdk7786_pcie_clk_ops = {
+static struct sh_clk_ops sdk7786_pcie_clk_ops = {
 	.enable		= sdk7786_pcie_clk_enable,
 	.disable	= sdk7786_pcie_clk_disable,
 };

arch/sh/include/asm/clock.h

@@ -4,7 +4,7 @@
 #include <linux/sh_clk.h>
 
 /* Should be defined by processor-specific code */
-void __deprecated arch_init_clk_ops(struct clk_ops **, int type);
+void __deprecated arch_init_clk_ops(struct sh_clk_ops **, int type);
 int __init arch_clk_init(void);
 
 /* arch/sh/kernel/cpu/clock-cpg.c */

arch/sh/kernel/cpu/sh2/clock-sh7619.c

@@ -28,7 +28,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
-static struct clk_ops sh7619_master_clk_ops = {
+static struct sh_clk_ops sh7619_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -38,7 +38,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7619_module_clk_ops = {
+static struct sh_clk_ops sh7619_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -47,22 +47,22 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
-static struct clk_ops sh7619_bus_clk_ops = {
+static struct sh_clk_ops sh7619_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static struct clk_ops sh7619_cpu_clk_ops = {
+static struct sh_clk_ops sh7619_cpu_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
-static struct clk_ops *sh7619_clk_ops[] = {
+static struct sh_clk_ops *sh7619_clk_ops[] = {
 	&sh7619_master_clk_ops,
 	&sh7619_module_clk_ops,
 	&sh7619_bus_clk_ops,
 	&sh7619_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
 	    test_mode_pin(MODE_PIN2 | MODE_PIN1))

arch/sh/kernel/cpu/sh2a/clock-sh7201.c

@@ -30,7 +30,7 @@ static void master_clk_init(struct clk *clk)
 	       pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
-static struct clk_ops sh7201_master_clk_ops = {
+static struct sh_clk_ops sh7201_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -40,7 +40,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7201_module_clk_ops = {
+static struct sh_clk_ops sh7201_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -50,7 +50,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7201_bus_clk_ops = {
+static struct sh_clk_ops sh7201_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -60,18 +60,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7201_cpu_clk_ops = {
+static struct sh_clk_ops sh7201_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7201_clk_ops[] = {
+static struct sh_clk_ops *sh7201_clk_ops[] = {
 	&sh7201_master_clk_ops,
 	&sh7201_module_clk_ops,
 	&sh7201_bus_clk_ops,
 	&sh7201_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
 		pll2_mult = 1;

arch/sh/kernel/cpu/sh2a/clock-sh7203.c

@@ -32,7 +32,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
 }
 
-static struct clk_ops sh7203_master_clk_ops = {
+static struct sh_clk_ops sh7203_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -42,7 +42,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7203_module_clk_ops = {
+static struct sh_clk_ops sh7203_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -52,22 +52,22 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx-2];
 }
 
-static struct clk_ops sh7203_bus_clk_ops = {
+static struct sh_clk_ops sh7203_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
-static struct clk_ops sh7203_cpu_clk_ops = {
+static struct sh_clk_ops sh7203_cpu_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
-static struct clk_ops *sh7203_clk_ops[] = {
+static struct sh_clk_ops *sh7203_clk_ops[] = {
 	&sh7203_master_clk_ops,
 	&sh7203_module_clk_ops,
 	&sh7203_bus_clk_ops,
 	&sh7203_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN1))
 		pll2_mult = 4;

arch/sh/kernel/cpu/sh2a/clock-sh7206.c

@@ -29,7 +29,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
-static struct clk_ops sh7206_master_clk_ops = {
+static struct sh_clk_ops sh7206_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -39,7 +39,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7206_module_clk_ops = {
+static struct sh_clk_ops sh7206_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -48,7 +48,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
-static struct clk_ops sh7206_bus_clk_ops = {
+static struct sh_clk_ops sh7206_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -58,18 +58,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7206_cpu_clk_ops = {
+static struct sh_clk_ops sh7206_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7206_clk_ops[] = {
+static struct sh_clk_ops *sh7206_clk_ops[] = {
 	&sh7206_master_clk_ops,
 	&sh7206_module_clk_ops,
 	&sh7206_bus_clk_ops,
 	&sh7206_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
 		pll2_mult = 1;

arch/sh/kernel/cpu/sh3/clock-sh3.c

@@ -34,7 +34,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pfc_divisors[idx];
 }
 
-static struct clk_ops sh3_master_clk_ops = {
+static struct sh_clk_ops sh3_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -46,7 +46,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh3_module_clk_ops = {
+static struct sh_clk_ops sh3_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -58,7 +58,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
-static struct clk_ops sh3_bus_clk_ops = {
+static struct sh_clk_ops sh3_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -70,18 +70,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh3_cpu_clk_ops = {
+static struct sh_clk_ops sh3_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh3_clk_ops[] = {
+static struct sh_clk_ops *sh3_clk_ops[] = {
 	&sh3_master_clk_ops,
 	&sh3_module_clk_ops,
 	&sh3_bus_clk_ops,
 	&sh3_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh3_clk_ops))
 		*ops = sh3_clk_ops[idx];

arch/sh/kernel/cpu/sh3/clock-sh7705.c

@@ -35,7 +35,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
 }
 
-static struct clk_ops sh7705_master_clk_ops = {
+static struct sh_clk_ops sh7705_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -45,7 +45,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7705_module_clk_ops = {
+static struct sh_clk_ops sh7705_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -55,7 +55,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
-static struct clk_ops sh7705_bus_clk_ops = {
+static struct sh_clk_ops sh7705_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -65,18 +65,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7705_cpu_clk_ops = {
+static struct sh_clk_ops sh7705_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7705_clk_ops[] = {
+static struct sh_clk_ops *sh7705_clk_ops[] = {
 	&sh7705_master_clk_ops,
 	&sh7705_module_clk_ops,
 	&sh7705_bus_clk_ops,
 	&sh7705_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7705_clk_ops))
 		*ops = sh7705_clk_ops[idx];

arch/sh/kernel/cpu/sh3/clock-sh7706.c

@@ -30,7 +30,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pfc_divisors[idx];
 }
 
-static struct clk_ops sh7706_master_clk_ops = {
+static struct sh_clk_ops sh7706_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -42,7 +42,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7706_module_clk_ops = {
+static struct sh_clk_ops sh7706_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -54,7 +54,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
-static struct clk_ops sh7706_bus_clk_ops = {
+static struct sh_clk_ops sh7706_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -66,18 +66,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7706_cpu_clk_ops = {
+static struct sh_clk_ops sh7706_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7706_clk_ops[] = {
+static struct sh_clk_ops *sh7706_clk_ops[] = {
 	&sh7706_master_clk_ops,
 	&sh7706_module_clk_ops,
 	&sh7706_bus_clk_ops,
 	&sh7706_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7706_clk_ops))
 		*ops = sh7706_clk_ops[idx];

arch/sh/kernel/cpu/sh3/clock-sh7709.c

@@ -30,7 +30,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= pfc_divisors[idx];
 }
 
-static struct clk_ops sh7709_master_clk_ops = {
+static struct sh_clk_ops sh7709_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -42,7 +42,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
-static struct clk_ops sh7709_module_clk_ops = {
+static struct sh_clk_ops sh7709_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -55,7 +55,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate * stc_multipliers[idx];
 }
 
-static struct clk_ops sh7709_bus_clk_ops = {
+static struct sh_clk_ops sh7709_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -67,18 +67,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
-static struct clk_ops sh7709_cpu_clk_ops = {
+static struct sh_clk_ops sh7709_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7709_clk_ops[] = {
+static struct sh_clk_ops *sh7709_clk_ops[] = {
 	&sh7709_master_clk_ops,
 	&sh7709_module_clk_ops,
 	&sh7709_bus_clk_ops,
 	&sh7709_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7709_clk_ops))
 		*ops = sh7709_clk_ops[idx];

arch/sh/kernel/cpu/sh3/clock-sh7710.c

@@ -29,7 +29,7 @@ static void master_clk_init(struct clk *clk)
 	clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
 }
 
-static struct clk_ops sh7710_master_clk_ops = {
+static struct sh_clk_ops sh7710_master_clk_ops = {
 	.init		= master_clk_init,
 };
 
@@ -39,7 +39,7 @@ static unsigned long module_clk_recalc(struct clk *clk)
 	return clk->parent->rate / md_table[idx];
 }
 
-static struct clk_ops sh7710_module_clk_ops = {
+static struct sh_clk_ops sh7710_module_clk_ops = {
 	.recalc		= module_clk_recalc,
 };
 
@@ -49,7 +49,7 @@ static unsigned long bus_clk_recalc(struct clk *clk)
 	return clk->parent->rate / md_table[idx];
 }
 
-static struct clk_ops sh7710_bus_clk_ops = {
+static struct sh_clk_ops sh7710_bus_clk_ops = {
 	.recalc		= bus_clk_recalc,
 };
 
@@ -59,18 +59,18 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 	return clk->parent->rate / md_table[idx];
 }
 
-static struct clk_ops sh7710_cpu_clk_ops = {
+static struct sh_clk_ops sh7710_cpu_clk_ops = {
 	.recalc		= cpu_clk_recalc,
 };
 
-static struct clk_ops *sh7710_clk_ops[] = {
+static struct sh_clk_ops *sh7710_clk_ops[] = {
 	&sh7710_master_clk_ops,
 	&sh7710_module_clk_ops,
 	&sh7710_bus_clk_ops,
 	&sh7710_cpu_clk_ops,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 	if (idx < ARRAY_SIZE(sh7710_clk_ops))
 		*ops = sh7710_clk_ops[idx];