redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux 

This was done to make UART1-3 on H3 consistent, and less complicated to
enable UART1-3 on the breakout header on the several H3 board (notably
Orange Pi's). This patch adds a bit of complexity for the existing Banana
Pi, which already had the RTS/CTS associated on UART1.

The RTS/CTS for UART2-3 could be defined in the same way, but since
there is no actual use case for them at the moment, they are left out.

Signed-off-by: Jorik Jonker <jorik@kippendief.biz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
hifive-unleashed-5.1
Jorik Jonker 2016-09-12 20:12:44 +02:00 committed by Maxime Ripard
parent e3d11d3c45
commit ae0fc94152
2 changed files with 10 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
View File

@ -185,7 +185,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};

11
arch/arm/boot/dts/sun8i-h3.dtsi
View File

@ -367,8 +367,15 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
uart1_pins: uart1 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_rts_cts_pins: uart1_rts_cts {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;