ASoC: fsl_sai: Set SYNC bit of TCR2 to Asynchronous Mode
There is one design rule according to SAI's reference manual: If the transmitter bit clock and frame sync are to be used by both transmitter and receiver, the transmitter must be configured for asynchronous operation and the receiver for synchronous operation. And SYNC of TCR2 is a 2-width control bit: 00 Asynchronous mode. 01 Synchronous with receiver. 10 Synchronous with another SAI transmitter. 11 Synchronous with another SAI receiver. So the driver should have set SYNC bit of TCR2 to 0x0, and meanwhile set SYNC bit of RCR2 to 0x1 (Synchronous with transmitter). Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
parent
376d1a92ca
commit
af96ff5b74
|
@ -333,8 +333,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
|
|||
* The transmitter bit clock and frame sync are to be
|
||||
* used by both the transmitter and receiver.
|
||||
*/
|
||||
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
|
||||
~FSL_SAI_CR2_SYNC);
|
||||
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
|
||||
regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
|
||||
FSL_SAI_CR2_SYNC);
|
||||
|
||||
|
|
Loading…
Reference in a new issue