[ARM] pxa/balloon3: Machine file cleanup
Logically separate parts of the file that are handled by one particular driver. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
This commit is contained in:
Marek Vasut
Eric Miao
parent
773108401d
commit
b0240bf4d4
|
|
@ -51,6 +51,180 @@
|
|||
#include "generic.h"
|
||||
#include "devices.h"
|
||||
|
||||
/******************************************************************************
|
||||
* Pin configuration
|
||||
******************************************************************************/
|
||||
static unsigned long balloon3_pin_config[] __initdata = {
|
||||
/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
GPIO45_BTUART_RTS,
|
||||
|
||||
/* Wakeup GPIO */
|
||||
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
|
||||
/* NAND & IDLE LED GPIOs */
|
||||
GPIO9_GPIO,
|
||||
GPIO10_GPIO,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* Audio and Touchscreen
|
||||
******************************************************************************/
|
||||
static unsigned long balloon3_ac97_pin_config[] = {
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO113_AC97_nRESET,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* Framebuffer
|
||||
******************************************************************************/
|
||||
|
||||
static void balloon3_backlight_power(int on)
|
||||
{
|
||||
pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
|
||||
gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
|
||||
}
|
||||
|
||||
static struct pxafb_mode_info balloon3_lcd_modes[] = {
|
||||
{
|
||||
.pixclock = 38000,
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.bpp = 16,
|
||||
.hsync_len = 8,
|
||||
.left_margin = 8,
|
||||
.right_margin = 8,
|
||||
.vsync_len = 2,
|
||||
.upper_margin = 4,
|
||||
.lower_margin = 5,
|
||||
.sync = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info balloon3_pxafb_info = {
|
||||
.modes = balloon3_lcd_modes,
|
||||
.num_modes = ARRAY_SIZE(balloon3_lcd_modes),
|
||||
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
||||
.pxafb_backlight_power = balloon3_backlight_power,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* SD/MMC card controller
|
||||
******************************************************************************/
|
||||
static unsigned long balloon3_mmc_pin_config[] = {
|
||||
GPIO32_MMC_CLK,
|
||||
GPIO92_MMC_DAT_0,
|
||||
GPIO109_MMC_DAT_1,
|
||||
GPIO110_MMC_DAT_2,
|
||||
GPIO111_MMC_DAT_3,
|
||||
GPIO112_MMC_CMD,
|
||||
};
|
||||
|
||||
static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
|
||||
{
|
||||
struct pxamci_platform_data *p_d = dev->platform_data;
|
||||
|
||||
if ((1 << vdd) & p_d->ocr_mask) {
|
||||
pr_debug("%s: on\n", __func__);
|
||||
/* FIXME something to prod here? */
|
||||
} else {
|
||||
pr_debug("%s: off\n", __func__);
|
||||
/* FIXME something to prod here? */
|
||||
}
|
||||
}
|
||||
|
||||
static struct pxamci_platform_data balloon3_mci_platform_data = {
|
||||
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
||||
.setpower = balloon3_mci_setpower,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* USB Gadget
|
||||
******************************************************************************/
|
||||
static int balloon3_udc_is_connected(void)
|
||||
{
|
||||
pr_debug("%s: udc connected\n", __func__);
|
||||
return 1;
|
||||
}
|
||||
|
||||
static void balloon3_udc_command(int cmd)
|
||||
{
|
||||
switch (cmd) {
|
||||
case PXA2XX_UDC_CMD_CONNECT:
|
||||
UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
|
||||
pr_debug("%s: connect\n", __func__);
|
||||
break;
|
||||
case PXA2XX_UDC_CMD_DISCONNECT:
|
||||
UP2OCR &= ~UP2OCR_DPPUE;
|
||||
pr_debug("%s: disconnect\n", __func__);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static struct pxa2xx_udc_mach_info balloon3_udc_info = {
|
||||
.udc_is_connected = balloon3_udc_is_connected,
|
||||
.udc_command = balloon3_udc_command,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* IrDA
|
||||
******************************************************************************/
|
||||
static struct pxaficp_platform_data balloon3_ficp_platform_data = {
|
||||
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* USB Host
|
||||
******************************************************************************/
|
||||
static unsigned long balloon3_ohci_pin_config[] = {
|
||||
GPIO88_USBH1_PWR,
|
||||
GPIO89_USBH1_PEN,
|
||||
};
|
||||
|
||||
static struct pxaohci_platform_data balloon3_ohci_platform_data = {
|
||||
.port_mode = PMM_PERPORT_MODE,
|
||||
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* LED
|
||||
******************************************************************************/
|
||||
static struct gpio_led balloon3_gpio_leds[] = {
|
||||
{
|
||||
.name = "balloon3:green:idle",
|
||||
.default_trigger = "heartbeat",
|
||||
.gpio = BALLOON3_GPIO_LED_IDLE,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "balloon3:green:nand",
|
||||
.default_trigger = "nand-disk",
|
||||
.gpio = BALLOON3_GPIO_LED_NAND,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
|
||||
.leds = balloon3_gpio_leds,
|
||||
.num_leds = ARRAY_SIZE(balloon3_gpio_leds),
|
||||
};
|
||||
|
||||
static struct platform_device balloon3led_device = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &balloon3_gpio_leds_platform_data,
|
||||
},
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* Compatibility: Parameter parsing
|
||||
******************************************************************************/
|
||||
static unsigned long balloon3_irq_enabled;
|
||||
|
||||
static unsigned long balloon3_features_present =
|
||||
|
|
@ -73,6 +247,9 @@ int __init parse_balloon3_features(char *arg)
|
|||
}
|
||||
early_param("balloon3_features", parse_balloon3_features);
|
||||
|
||||
/******************************************************************************
|
||||
* FPGA IRQ
|
||||
******************************************************************************/
|
||||
static void balloon3_mask_irq(unsigned int irq)
|
||||
{
|
||||
int balloon3_irq = (irq - BALLOON3_IRQ(0));
|
||||
|
|
@ -132,159 +309,9 @@ static void __init balloon3_init_irq(void)
|
|||
"enabled\n", __func__, BALLOON3_AUX_NIRQ);
|
||||
}
|
||||
|
||||
static unsigned long balloon3_ac97_pin_config[] = {
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO113_AC97_nRESET,
|
||||
};
|
||||
|
||||
static void balloon3_backlight_power(int on)
|
||||
{
|
||||
pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
|
||||
gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
|
||||
}
|
||||
|
||||
static unsigned long balloon3_lcd_pin_config[] = {
|
||||
/* LCD - 16bpp Active TFT */
|
||||
GPIOxx_LCD_TFT_16BPP,
|
||||
|
||||
GPIO99_GPIO, /* Backlight */
|
||||
};
|
||||
|
||||
static struct pxafb_mode_info balloon3_lcd_modes[] = {
|
||||
{
|
||||
.pixclock = 38000,
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.bpp = 16,
|
||||
.hsync_len = 8,
|
||||
.left_margin = 8,
|
||||
.right_margin = 8,
|
||||
.vsync_len = 2,
|
||||
.upper_margin = 4,
|
||||
.lower_margin = 5,
|
||||
.sync = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info balloon3_pxafb_info = {
|
||||
.modes = balloon3_lcd_modes,
|
||||
.num_modes = ARRAY_SIZE(balloon3_lcd_modes),
|
||||
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
||||
.pxafb_backlight_power = balloon3_backlight_power,
|
||||
};
|
||||
|
||||
static unsigned long balloon3_mmc_pin_config[] = {
|
||||
GPIO32_MMC_CLK,
|
||||
GPIO92_MMC_DAT_0,
|
||||
GPIO109_MMC_DAT_1,
|
||||
GPIO110_MMC_DAT_2,
|
||||
GPIO111_MMC_DAT_3,
|
||||
GPIO112_MMC_CMD,
|
||||
};
|
||||
|
||||
static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
|
||||
{
|
||||
struct pxamci_platform_data *p_d = dev->platform_data;
|
||||
|
||||
if ((1 << vdd) & p_d->ocr_mask) {
|
||||
pr_debug("%s: on\n", __func__);
|
||||
/* FIXME something to prod here? */
|
||||
} else {
|
||||
pr_debug("%s: off\n", __func__);
|
||||
/* FIXME something to prod here? */
|
||||
}
|
||||
}
|
||||
|
||||
static struct pxamci_platform_data balloon3_mci_platform_data = {
|
||||
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
||||
.setpower = balloon3_mci_setpower,
|
||||
};
|
||||
|
||||
static int balloon3_udc_is_connected(void)
|
||||
{
|
||||
pr_debug("%s: udc connected\n", __func__);
|
||||
return 1;
|
||||
}
|
||||
|
||||
static void balloon3_udc_command(int cmd)
|
||||
{
|
||||
switch (cmd) {
|
||||
case PXA2XX_UDC_CMD_CONNECT:
|
||||
UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
|
||||
pr_debug("%s: connect\n", __func__);
|
||||
break;
|
||||
case PXA2XX_UDC_CMD_DISCONNECT:
|
||||
UP2OCR &= ~UP2OCR_DPPUE;
|
||||
pr_debug("%s: disconnect\n", __func__);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static struct pxa2xx_udc_mach_info balloon3_udc_info = {
|
||||
.udc_is_connected = balloon3_udc_is_connected,
|
||||
.udc_command = balloon3_udc_command,
|
||||
};
|
||||
|
||||
static struct pxaficp_platform_data balloon3_ficp_platform_data = {
|
||||
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
|
||||
};
|
||||
|
||||
static unsigned long balloon3_ohci_pin_config[] = {
|
||||
GPIO88_USBH1_PWR,
|
||||
GPIO89_USBH1_PEN,
|
||||
};
|
||||
|
||||
static struct pxaohci_platform_data balloon3_ohci_platform_data = {
|
||||
.port_mode = PMM_PERPORT_MODE,
|
||||
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
||||
};
|
||||
|
||||
static unsigned long balloon3_pin_config[] __initdata = {
|
||||
/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
GPIO45_BTUART_RTS,
|
||||
|
||||
/* Wakeup GPIO */
|
||||
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
|
||||
/* NAND & IDLE LED GPIOs */
|
||||
GPIO9_GPIO,
|
||||
GPIO10_GPIO,
|
||||
};
|
||||
|
||||
static struct gpio_led balloon3_gpio_leds[] = {
|
||||
{
|
||||
.name = "balloon3:green:idle",
|
||||
.default_trigger = "heartbeat",
|
||||
.gpio = BALLOON3_GPIO_LED_IDLE,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "balloon3:green:nand",
|
||||
.default_trigger = "nand-disk",
|
||||
.gpio = BALLOON3_GPIO_LED_NAND,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
|
||||
.leds = balloon3_gpio_leds,
|
||||
.num_leds = ARRAY_SIZE(balloon3_gpio_leds),
|
||||
};
|
||||
|
||||
static struct platform_device balloon3led_device = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &balloon3_gpio_leds_platform_data,
|
||||
},
|
||||
};
|
||||
|
||||
/******************************************************************************
|
||||
* Machine init
|
||||
******************************************************************************/
|
||||
static void __init balloon3_init(void)
|
||||
{
|
||||
pr_info("Initialising Balloon3\n");
|
||||
|
|
|
|||
Loading…
Reference in a new issue