From f0d2f68a6387867c4748bc94c9b0165a49701204 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 3 Oct 2014 16:57:10 +0300 Subject: [PATCH 1/6] ARM: OMAP3: clock: use clk_features flags for omap3 DPLL4 checks DPLL4 can't be reprogrammed on OMAP3430 ES1.0 due to hardware limitation. Currently, the code does runtime omap_rev() check to see the chip it is being executed on, instead, change this to use clk_features flags. This avoids need for runtime omap_rev() checks. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.c | 4 ++++ arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock3xxx.c | 2 +- 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 500530d1364a..c2b239857cc4 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -771,4 +771,8 @@ void __init ti_clk_init_features(void) ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; else if (cpu_is_omap34xx()) ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; + + /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */ + if (omap_rev() == OMAP3430_REV_ES1_0) + ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 4592a2762592..641337c6cde9 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -234,6 +234,7 @@ struct ti_clk_features { }; #define TI_CLK_DPLL_HAS_FREQSEL (1 << 0) +#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1) extern struct ti_clk_features ti_clk_features; diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 0b02b4161d71..9a2560181909 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -46,7 +46,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, * on 3430ES1 prevents us from changing DPLL multipliers or dividers * on DPLL4. */ - if (omap_rev() == OMAP3430_REV_ES1_0) { + if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); return -EINVAL; } From d539efa37f1f789339699c941e72e320d12d5f28 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 3 Oct 2014 16:57:11 +0300 Subject: [PATCH 2/6] ARM: OMAP3: clock: add new rate changing logic support for noncore DPLLs Currently, DPLL code hides the re-parenting within its internals, which is wrong. This needs to be exposed to the common clock code via determine_rate and set_rate_and_parent APIs. This patch adds support for these, which will be taken into use in the following patches. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/dpll3xxx.c | 147 +++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 9 ++ 2 files changed, 156 insertions(+) diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index ac3d789ac3cd..cfe7c30235d1 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -546,6 +546,153 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } +/** + * omap3_noncore_dpll_determine_rate - determine rate for a DPLL + * @hw: pointer to the clock to determine rate for + * @rate: target rate for the DPLL + * @best_parent_rate: pointer for returning best parent rate + * @best_parent_clk: pointer for returning best parent clock + * + * Determines which DPLL mode to use for reaching a desired target rate. + * Checks whether the DPLL shall be in bypass or locked mode, and if + * locked, calculates the M,N values for the DPLL via round-rate. + * Returns a positive clock rate with success, negative error value + * in failure. + */ +long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_rate(dd->clk_bypass) == rate && + (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + *best_parent_clk = dd->clk_bypass; + } else { + rate = omap2_dpll_round_rate(hw, rate, best_parent_rate); + *best_parent_clk = dd->clk_ref; + } + + *best_parent_rate = rate; + + return rate; +} + +/** + * omap3_noncore_dpll_set_parent - set parent for a DPLL clock + * @hw: pointer to the clock to set parent for + * @index: parent index to select + * + * Sets parent for a DPLL clock. This sets the DPLL into bypass or + * locked mode. Returns 0 with success, negative error value otherwise. + */ +int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + int ret; + + if (!hw) + return -EINVAL; + + if (index) + ret = _omap3_noncore_dpll_bypass(clk); + else + ret = _omap3_noncore_dpll_lock(clk); + + return ret; +} + +/** + * omap3_noncore_dpll_set_rate_new - set rate for a DPLL clock + * @hw: pointer to the clock to set parent for + * @rate: target rate for the clock + * @parent_rate: rate of the parent clock + * + * Sets rate for a DPLL clock. First checks if the clock parent is + * reference clock (in bypass mode, the rate of the clock can't be + * changed) and proceeds with the rate change operation. Returns 0 + * with success, negative error value otherwise. + */ +static int omap3_noncore_dpll_set_rate_new(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u16 freqsel = 0; + int ret; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_parent(hw->clk) != dd->clk_ref) + return -EINVAL; + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + /* Freqsel is available only on OMAP343X devices */ + if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { + freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); + WARN_ON(!freqsel); + } + + pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, + __clk_get_name(hw->clk), rate); + + ret = omap3_noncore_dpll_program(clk, freqsel); + + return ret; +} + +/** + * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock + * @hw: pointer to the clock to set rate and parent for + * @rate: target rate for the DPLL + * @parent_rate: clock rate of the DPLL parent + * @index: new parent index for the DPLL, 0 - reference, 1 - bypass + * + * Sets rate and parent for a DPLL clock. If new parent is the bypass + * clock, only selects the parent. Otherwise proceeds with a rate + * change, as this will effectively also change the parent as the + * DPLL is put into locked mode. Returns 0 with success, negative error + * value otherwise. + */ +int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index) +{ + int ret; + + if (!hw || !rate) + return -EINVAL; + + /* + * clk-ref at index[0], in which case we only need to set rate, + * the parent will be changed automatically with the lock sequence. + * With clk-bypass case we only need to change parent. + */ + if (index) + ret = omap3_noncore_dpll_set_parent(hw, index); + else + ret = omap3_noncore_dpll_set_rate_new(hw, rate, parent_rate); + + return ret; +} + /* DPLL autoidle read/set code */ /** diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index f75acbf70e96..6f9fb77ffdd5 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -254,8 +254,17 @@ extern const struct clk_ops ti_clk_mux_ops; void omap2_init_clk_hw_omap_clocks(struct clk *clk); int omap3_noncore_dpll_enable(struct clk_hw *hw); void omap3_noncore_dpll_disable(struct clk_hw *hw); +int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index); int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate); +int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index); +long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk); unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, unsigned long parent_rate); long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, From 83501ff0a5032dfbd63ab1ca9d9d25b97ec49fb9 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 3 Oct 2014 16:57:12 +0300 Subject: [PATCH 3/6] ARM: OMAP4: clock: add support for determine_rate for omap4 regm4xen DPLL Similarly to OMAP3 noncore DPLL, the implementation of this DPLL clock type is wrong. This patch adds basic functionality for determine_rate for this clock type which will be taken into use in the patches following later. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/dpll44xx.c | 41 ++++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 4 ++++ 2 files changed, 45 insertions(+) diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 4613f1e86988..535822fcf4bb 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -207,3 +207,44 @@ out: return dd->last_rounded_rate; } + +/** + * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL + * @hw: pointer to the clock to determine rate for + * @rate: target rate for the DPLL + * @best_parent_rate: pointer for returning best parent rate + * @best_parent_clk: pointer for returning best parent clock + * + * Determines which DPLL mode to use for reaching a desired rate. + * Checks whether the DPLL shall be in bypass or locked mode, and if + * locked, calculates the M,N values for the DPLL via round-rate. + * Returns a positive clock rate with success, negative error value + * in failure. + */ +long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_rate(dd->clk_bypass) == rate && + (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + *best_parent_clk = dd->clk_bypass; + } else { + rate = omap4_dpll_regm4xen_round_rate(hw, rate, + best_parent_rate); + *best_parent_clk = dd->clk_ref; + } + + *best_parent_rate = rate; + + return rate; +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 6f9fb77ffdd5..abc702a73aca 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -270,6 +270,10 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, unsigned long target_rate, unsigned long *parent_rate); +long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk); u8 omap2_init_dpll_parent(struct clk_hw *hw); unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, From e3ab6013ab06d3a861ed00c1f8d32aa4e6b66ddd Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 3 Oct 2014 16:57:13 +0300 Subject: [PATCH 4/6] ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent Expand the support of omap4 per-dpll to provide set_rate_and_parent. This is required for proper behavior of clk_change_rate with determine_rate support. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock3xxx.c | 36 +++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 2 ++ 2 files changed, 38 insertions(+) diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 9a2560181909..a9e86db5daf9 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -38,6 +38,18 @@ /* needed by omap3_core_dpll_m2_set_rate() */ struct clk *sdrc_ick_p, *arm_fck_p; + +/** + * omap3_dpll4_set_rate - set rate for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * + * Check if the current SoC supports the per-dpll reprogram operation + * or not, and then do the rate change if supported. Returns -EINVAL + * if not supported, 0 for success, and potential error codes from the + * clock rate change. + */ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -54,6 +66,30 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, return omap3_noncore_dpll_set_rate(hw, rate, parent_rate); } +/** + * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * @index: parent index, 0 - reference clock, 1 - bypass clock + * + * Check if the current SoC support the per-dpll reprogram operation + * or not, and then do the rate + parent change if supported. Returns + * -EINVAL if not supported, 0 for success, and potential error codes + * from the clock rate change. + */ +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index) +{ + if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { + pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + + return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate, + index); +} + void __init omap3_clk_lock_dpll5(void) { struct clk *dpll5_clk; diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index abc702a73aca..74e5341463c9 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -291,6 +291,8 @@ int omap2_clk_disable_autoidle_all(void); void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index); int omap2_dflt_clk_enable(struct clk_hw *hw); void omap2_dflt_clk_disable(struct clk_hw *hw); int omap2_dflt_clk_is_enabled(struct clk_hw *hw); From 2e1a7b014f9c3d61fbf12b429f0479242264dbec Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 3 Oct 2014 16:57:14 +0300 Subject: [PATCH 5/6] ARM: OMAP3+: DPLL: use determine_rate() and set_rate_and_parent() Currently, DPLLs are hiding the gory details of switching parent within set_rate, which confuses the common clock code and is wrong. Fixed by applying the new determine_rate() and set_rate_and_parent() functionality to any clock-ops previously using the broken approach. This patch also removes the broken legacy code. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cclock3xxx_data.c | 6 ++ arch/arm/mach-omap2/dpll3xxx.c | 96 ++------------------------- drivers/clk/ti/dpll.c | 15 +++++ 3 files changed, 25 insertions(+), 92 deletions(-) diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index eb8c75ec3b1a..5c5ebb4db5f7 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -257,6 +257,9 @@ static const struct clk_ops dpll1_ck_ops = { .get_parent = &omap2_init_dpll_parent, .recalc_rate = &omap3_dpll_recalc, .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; @@ -367,6 +370,9 @@ static const struct clk_ops dpll4_ck_ops = { .get_parent = &omap2_init_dpll_parent, .recalc_rate = &omap3_dpll_recalc, .set_rate = &omap3_dpll4_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index cfe7c30235d1..20e120d071dd 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -459,93 +459,6 @@ void omap3_noncore_dpll_disable(struct clk_hw *hw) /* Non-CORE DPLL rate set code */ -/** - * omap3_noncore_dpll_set_rate - set non-core DPLL rate - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Set the DPLL CLKOUT to the target rate. If the DPLL can enter - * low-power bypass, and the target rate is the bypass source clock - * rate, then configure the DPLL for bypass. Otherwise, round the - * target rate if it hasn't been done already, then program and lock - * the DPLL. Returns -EINVAL upon error, or 0 upon success. - */ -int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct clk *new_parent = NULL; - unsigned long rrate; - u16 freqsel = 0; - struct dpll_data *dd; - int ret; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_rate(dd->clk_bypass) == rate && - (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - pr_debug("%s: %s: set rate: entering bypass.\n", - __func__, __clk_get_name(hw->clk)); - - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - ret = _omap3_noncore_dpll_bypass(clk); - if (!ret) - new_parent = dd->clk_bypass; - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - } else { - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - - /* XXX this check is probably pointless in the CCF context */ - if (dd->last_rounded_rate != rate) { - rrate = __clk_round_rate(hw->clk, rate); - if (rrate != rate) { - pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n", - __func__, __clk_get_name(hw->clk), - rrate, rate); - rate = rrate; - } - } - - if (dd->last_rounded_rate == 0) - return -EINVAL; - - /* Freqsel is available only on OMAP343X devices */ - if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { - freqsel = _omap3_dpll_compute_freqsel(clk, - dd->last_rounded_n); - WARN_ON(!freqsel); - } - - pr_debug("%s: %s: set rate: locking rate to %lu.\n", - __func__, __clk_get_name(hw->clk), rate); - - ret = omap3_noncore_dpll_program(clk, freqsel); - if (!ret) - new_parent = dd->clk_ref; - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - } - /* - * FIXME - this is all wrong. common code handles reparenting and - * migrating prepare/enable counts. dplls should be a multiplexer - * clock and this should be a set_parent operation so that all of that - * stuff is inherited for free - */ - - if (!ret && clk_get_parent(hw->clk) != new_parent) - __clk_reparent(hw->clk, new_parent); - - return 0; -} - /** * omap3_noncore_dpll_determine_rate - determine rate for a DPLL * @hw: pointer to the clock to determine rate for @@ -611,7 +524,7 @@ int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) } /** - * omap3_noncore_dpll_set_rate_new - set rate for a DPLL clock + * omap3_noncore_dpll_set_rate - set rate for a DPLL clock * @hw: pointer to the clock to set parent for * @rate: target rate for the clock * @parent_rate: rate of the parent clock @@ -621,9 +534,8 @@ int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) * changed) and proceeds with the rate change operation. Returns 0 * with success, negative error value otherwise. */ -static int omap3_noncore_dpll_set_rate_new(struct clk_hw *hw, - unsigned long rate, - unsigned long parent_rate) +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { struct clk_hw_omap *clk = to_clk_hw_omap(hw); struct dpll_data *dd; @@ -688,7 +600,7 @@ int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, if (index) ret = omap3_noncore_dpll_set_parent(hw, index); else - ret = omap3_noncore_dpll_set_rate_new(hw, rate, parent_rate); + ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate); return ret; } diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 79791e1bf282..85ac0dd501de 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -33,6 +33,9 @@ static const struct clk_ops dpll_m4xen_ck_ops = { .recalc_rate = &omap4_dpll_regm4xen_recalc, .round_rate = &omap4_dpll_regm4xen_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap4_dpll_regm4xen_determine_rate, .get_parent = &omap2_init_dpll_parent, }; #else @@ -53,6 +56,9 @@ static const struct clk_ops dpll_ck_ops = { .recalc_rate = &omap3_dpll_recalc, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .get_parent = &omap2_init_dpll_parent, }; @@ -61,6 +67,9 @@ static const struct clk_ops dpll_no_gate_ck_ops = { .get_parent = &omap2_init_dpll_parent, .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, }; #else static const struct clk_ops dpll_core_ck_ops = {}; @@ -97,6 +106,9 @@ static const struct clk_ops omap3_dpll_ck_ops = { .get_parent = &omap2_init_dpll_parent, .recalc_rate = &omap3_dpll_recalc, .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; @@ -106,6 +118,9 @@ static const struct clk_ops omap3_dpll_per_ck_ops = { .get_parent = &omap2_init_dpll_parent, .recalc_rate = &omap3_dpll_recalc, .set_rate = &omap3_dpll4_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; #endif From 79005fbd3e1d671d08c45c9140ee9826efdc367c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 13 Nov 2014 09:36:55 -0700 Subject: [PATCH 6/6] ARM: OMAP2+: hwmod: drop unnecessary list initialization ml->node and sl->node are currently initialized by means of INIT_LIST_HEAD(). That initialiation is followed by a list_add() call. Looking at what both these functions do we will have: ml->node.next = &ml->node; ml->node.prev = &ml->node; oi->master->master_ports.next.prev = &ml->node; ml->node.next = &oi->master->master_ports.next; ml->node.prev = &oi->master->master_ports; oi->master->master_ports.next = &ml->node; from this, it's clear that both INIT_LIST_HEAD() calls are unnecessary and can be safely removed. Signed-off-by: Felipe Balbi Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 716247ed9e0c..acae6d5d1151 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2832,12 +2832,10 @@ static int __init _add_link(struct omap_hwmod_ocp_if *oi) _alloc_links(&ml, &sl); ml->ocp_if = oi; - INIT_LIST_HEAD(&ml->node); list_add(&ml->node, &oi->master->master_ports); oi->master->masters_cnt++; sl->ocp_if = oi; - INIT_LIST_HEAD(&sl->node); list_add(&sl->node, &oi->slave->slave_ports); oi->slave->slaves_cnt++;