ASoC: sgtl5000: Improve VAG power and mute control
VAG power control is improved to fit the manual [1]. This patch fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.
I.e. after boot:
- Connect sound source to Line-In jack;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Change VAG power on/off control according to the following algorithm:
- turn VAG power ON on the 1st incoming event.
- keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
- turn VAG power OFF when there is the latest consumer's pre-down event
come.
- always delay after VAG power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
According to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Cc: stable@vger.kernel.org
Fixes: 9b34e6cc3b
("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
cfc8f568aa
commit
b1f373a11d
|
@ -31,6 +31,13 @@
|
|||
#define SGTL5000_DAP_REG_OFFSET 0x0100
|
||||
#define SGTL5000_MAX_REG_OFFSET 0x013A
|
||||
|
||||
/* Delay for the VAG ramp up */
|
||||
#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
|
||||
/* Delay for the VAG ramp down */
|
||||
#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
|
||||
|
||||
#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
|
||||
|
||||
/* default value of sgtl5000 registers */
|
||||
static const struct reg_default sgtl5000_reg_defaults[] = {
|
||||
{ SGTL5000_CHIP_DIG_POWER, 0x0000 },
|
||||
|
@ -123,6 +130,13 @@ enum {
|
|||
I2S_SCLK_STRENGTH_HIGH,
|
||||
};
|
||||
|
||||
enum {
|
||||
HP_POWER_EVENT,
|
||||
DAC_POWER_EVENT,
|
||||
ADC_POWER_EVENT,
|
||||
LAST_POWER_EVENT = ADC_POWER_EVENT
|
||||
};
|
||||
|
||||
/* sgtl5000 private structure in codec */
|
||||
struct sgtl5000_priv {
|
||||
int sysclk; /* sysclk rate */
|
||||
|
@ -137,8 +151,109 @@ struct sgtl5000_priv {
|
|||
u8 micbias_voltage;
|
||||
u8 lrclk_strength;
|
||||
u8 sclk_strength;
|
||||
u16 mute_state[LAST_POWER_EVENT + 1];
|
||||
};
|
||||
|
||||
static inline int hp_sel_input(struct snd_soc_component *component)
|
||||
{
|
||||
return (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_CTRL) &
|
||||
SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
|
||||
}
|
||||
|
||||
static inline u16 mute_output(struct snd_soc_component *component,
|
||||
u16 mute_mask)
|
||||
{
|
||||
u16 mute_reg = snd_soc_component_read32(component,
|
||||
SGTL5000_CHIP_ANA_CTRL);
|
||||
|
||||
snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
|
||||
mute_mask, mute_mask);
|
||||
return mute_reg;
|
||||
}
|
||||
|
||||
static inline void restore_output(struct snd_soc_component *component,
|
||||
u16 mute_mask, u16 mute_reg)
|
||||
{
|
||||
snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
|
||||
mute_mask, mute_reg);
|
||||
}
|
||||
|
||||
static void vag_power_on(struct snd_soc_component *component, u32 source)
|
||||
{
|
||||
if (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
|
||||
SGTL5000_VAG_POWERUP)
|
||||
return;
|
||||
|
||||
snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
|
||||
SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
|
||||
|
||||
/* When VAG powering on to get local loop from Line-In, the sleep
|
||||
* is required to avoid loud pop.
|
||||
*/
|
||||
if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
|
||||
source == HP_POWER_EVENT)
|
||||
msleep(SGTL5000_VAG_POWERUP_DELAY);
|
||||
}
|
||||
|
||||
static int vag_power_consumers(struct snd_soc_component *component,
|
||||
u16 ana_pwr_reg, u32 source)
|
||||
{
|
||||
int consumers = 0;
|
||||
|
||||
/* count dac/adc consumers unconditional */
|
||||
if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
|
||||
consumers++;
|
||||
if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
|
||||
consumers++;
|
||||
|
||||
/*
|
||||
* If the event comes from HP and Line-In is selected,
|
||||
* current action is 'DAC to be powered down'.
|
||||
* As HP_POWERUP is not set when HP muxed to line-in,
|
||||
* we need to keep VAG power ON.
|
||||
*/
|
||||
if (source == HP_POWER_EVENT) {
|
||||
if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
|
||||
consumers++;
|
||||
} else {
|
||||
if (ana_pwr_reg & SGTL5000_HP_POWERUP)
|
||||
consumers++;
|
||||
}
|
||||
|
||||
return consumers;
|
||||
}
|
||||
|
||||
static void vag_power_off(struct snd_soc_component *component, u32 source)
|
||||
{
|
||||
u16 ana_pwr = snd_soc_component_read32(component,
|
||||
SGTL5000_CHIP_ANA_POWER);
|
||||
|
||||
if (!(ana_pwr & SGTL5000_VAG_POWERUP))
|
||||
return;
|
||||
|
||||
/*
|
||||
* This function calls when any of VAG power consumers is disappearing.
|
||||
* Thus, if there is more than one consumer at the moment, as minimum
|
||||
* one consumer will definitely stay after the end of the current
|
||||
* event.
|
||||
* Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
|
||||
* - LINE_IN (for HP events) / HP (for DAC/ADC events)
|
||||
* - DAC
|
||||
* - ADC
|
||||
* (the current consumer is disappearing right now)
|
||||
*/
|
||||
if (vag_power_consumers(component, ana_pwr, source) >= 2)
|
||||
return;
|
||||
|
||||
snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
|
||||
SGTL5000_VAG_POWERUP, 0);
|
||||
/* In power down case, we need wait 400-1000 ms
|
||||
* when VAG fully ramped down.
|
||||
* As longer we wait, as smaller pop we've got.
|
||||
*/
|
||||
msleep(SGTL5000_VAG_POWERDOWN_DELAY);
|
||||
}
|
||||
|
||||
/*
|
||||
* mic_bias power on/off share the same register bits with
|
||||
* output impedance of mic bias, when power on mic bias, we
|
||||
|
@ -170,36 +285,46 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* As manual described, ADC/DAC only works when VAG powerup,
|
||||
* So enabled VAG before ADC/DAC up.
|
||||
* In power down case, we need wait 400ms when vag fully ramped down.
|
||||
*/
|
||||
static int power_vag_event(struct snd_soc_dapm_widget *w,
|
||||
struct snd_kcontrol *kcontrol, int event)
|
||||
static int vag_and_mute_control(struct snd_soc_component *component,
|
||||
int event, int event_source)
|
||||
{
|
||||
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
||||
const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
|
||||
static const u16 mute_mask[] = {
|
||||
/*
|
||||
* Mask for HP_POWER_EVENT.
|
||||
* Muxing Headphones have to be wrapped with mute/unmute
|
||||
* headphones only.
|
||||
*/
|
||||
SGTL5000_HP_MUTE,
|
||||
/*
|
||||
* Masks for DAC_POWER_EVENT/ADC_POWER_EVENT.
|
||||
* Muxing DAC or ADC block have to wrapped with mute/unmute
|
||||
* both headphones and line-out.
|
||||
*/
|
||||
SGTL5000_OUTPUTS_MUTE,
|
||||
SGTL5000_OUTPUTS_MUTE
|
||||
};
|
||||
|
||||
struct sgtl5000_priv *sgtl5000 =
|
||||
snd_soc_component_get_drvdata(component);
|
||||
|
||||
switch (event) {
|
||||
case SND_SOC_DAPM_POST_PMU:
|
||||
snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
|
||||
SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
|
||||
msleep(400);
|
||||
case SND_SOC_DAPM_PRE_PMU:
|
||||
sgtl5000->mute_state[event_source] =
|
||||
mute_output(component, mute_mask[event_source]);
|
||||
break;
|
||||
case SND_SOC_DAPM_POST_PMU:
|
||||
vag_power_on(component, event_source);
|
||||
restore_output(component, mute_mask[event_source],
|
||||
sgtl5000->mute_state[event_source]);
|
||||
break;
|
||||
|
||||
case SND_SOC_DAPM_PRE_PMD:
|
||||
/*
|
||||
* Don't clear VAG_POWERUP, when both DAC and ADC are
|
||||
* operational to prevent inadvertently starving the
|
||||
* other one of them.
|
||||
*/
|
||||
if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
|
||||
mask) != mask) {
|
||||
snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
|
||||
SGTL5000_VAG_POWERUP, 0);
|
||||
msleep(400);
|
||||
}
|
||||
sgtl5000->mute_state[event_source] =
|
||||
mute_output(component, mute_mask[event_source]);
|
||||
vag_power_off(component, event_source);
|
||||
break;
|
||||
case SND_SOC_DAPM_POST_PMD:
|
||||
restore_output(component, mute_mask[event_source],
|
||||
sgtl5000->mute_state[event_source]);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
|
@ -208,6 +333,41 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Mute Headphone when power it up/down.
|
||||
* Control VAG power on HP power path.
|
||||
*/
|
||||
static int headphone_pga_event(struct snd_soc_dapm_widget *w,
|
||||
struct snd_kcontrol *kcontrol, int event)
|
||||
{
|
||||
struct snd_soc_component *component =
|
||||
snd_soc_dapm_to_component(w->dapm);
|
||||
|
||||
return vag_and_mute_control(component, event, HP_POWER_EVENT);
|
||||
}
|
||||
|
||||
/* As manual describes, ADC/DAC powering up/down requires
|
||||
* to mute outputs to avoid pops.
|
||||
* Control VAG power on ADC/DAC power path.
|
||||
*/
|
||||
static int adc_updown_depop(struct snd_soc_dapm_widget *w,
|
||||
struct snd_kcontrol *kcontrol, int event)
|
||||
{
|
||||
struct snd_soc_component *component =
|
||||
snd_soc_dapm_to_component(w->dapm);
|
||||
|
||||
return vag_and_mute_control(component, event, ADC_POWER_EVENT);
|
||||
}
|
||||
|
||||
static int dac_updown_depop(struct snd_soc_dapm_widget *w,
|
||||
struct snd_kcontrol *kcontrol, int event)
|
||||
{
|
||||
struct snd_soc_component *component =
|
||||
snd_soc_dapm_to_component(w->dapm);
|
||||
|
||||
return vag_and_mute_control(component, event, DAC_POWER_EVENT);
|
||||
}
|
||||
|
||||
/* input sources for ADC */
|
||||
static const char *adc_mux_text[] = {
|
||||
"MIC_IN", "LINE_IN"
|
||||
|
@ -280,7 +440,10 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
|
|||
mic_bias_event,
|
||||
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
||||
|
||||
SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
|
||||
SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
|
||||
headphone_pga_event,
|
||||
SND_SOC_DAPM_PRE_POST_PMU |
|
||||
SND_SOC_DAPM_PRE_POST_PMD),
|
||||
SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
|
||||
|
||||
SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
|
||||
|
@ -301,11 +464,12 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
|
|||
0, SGTL5000_CHIP_DIG_POWER,
|
||||
1, 0),
|
||||
|
||||
SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
|
||||
SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
|
||||
|
||||
SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
|
||||
SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
|
||||
SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
|
||||
adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
|
||||
SND_SOC_DAPM_PRE_POST_PMD),
|
||||
SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
|
||||
dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
|
||||
SND_SOC_DAPM_PRE_POST_PMD),
|
||||
};
|
||||
|
||||
/* routes for sgtl5000 */
|
||||
|
|
Loading…
Reference in a new issue