tree-wide: fix typos "selct" + "slect" -> "select"

This patch was generated by

	git grep -E -i -l 's(le|el)ct' | xargs -r perl -p -i -e 's/([Ss])(le|el)ct/$1elect/

with only skipping net/netfilter/xt_SECMARK.c and
include/linux/netfilter/xt_SECMARK.h which have a struct member called
selctx.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/media/video/ov772x.c

@@ -247,7 +247,7 @@
 
 /* COM5 */
 #define AFR_ON_OFF      0x80	/* Auto frame rate control ON/OFF selection */
-#define AFR_SPPED       0x40	/* Auto frame rate control speed slection */
+#define AFR_SPPED       0x40	/* Auto frame rate control speed selection */
 				/* Auto frame rate max rate control */
 #define AFR_NO_RATE     0x00	/*     No  reduction of frame rate */
 #define AFR_1p2         0x10	/*     Max reduction to 1/2 frame rate */

drivers/scsi/aic7xxx/aic79xx.seq

@@ -1281,7 +1281,7 @@ END_CRITICAL;
  * Is it a disconnect message?  Set a flag in the SCB to remind us
  * and await the bus going free.  If this is an untagged transaction
  * store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
  */
 mesgin_disconnect:
 	/*

drivers/scsi/aic7xxx/aic79xx_osm.c

@@ -2335,7 +2335,7 @@ ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
 			/*
 			 * The sequencer will never re-reference the
 			 * in-core SCB.  To make sure we are notified
-			 * during reslection, set the MK_MESSAGE flag in
+			 * during reselection, set the MK_MESSAGE flag in
 			 * the card's copy of the SCB.
 			 */
 			ahd_outb(ahd, SCB_CONTROL,

drivers/scsi/aic7xxx/aic7xxx.seq

@@ -1693,7 +1693,7 @@ if ((ahc->flags & AHC_INITIATORROLE) != 0) {
  * Is it a disconnect message?  Set a flag in the SCB to remind us
  * and await the bus going free.  If this is an untagged transaction
  * store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
  */
 mesgin_disconnect:
 	/*

drivers/scsi/aic7xxx/aic7xxx_osm.c

@@ -2290,7 +2290,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
 		 * In the non-paging case, the sequencer will
 		 * never re-reference the in-core SCB.
 		 * To make sure we are notified during
-		 * reslection, set the MK_MESSAGE flag in
+		 * reselection, set the MK_MESSAGE flag in
 		 * the card's copy of the SCB.
 		 */
 		if ((ahc->flags & AHC_PAGESCBS) == 0) {

drivers/scsi/dc395x.c

@@ -1509,7 +1509,7 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 		 * Try anyway?
 		 *
 		 * We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
-		 * Timeout, a Disconnect or a Reselction IRQ, so we would be screwed!
+		 * Timeout, a Disconnect or a Reselection IRQ, so we would be screwed!
 		 * (This is likely to be a bug in the hardware. Obviously, most people
 		 *  only have one initiator per SCSI bus.)
 		 * Instead let this fail and have the timer make sure the command is 

include/linux/spi/spi_bitbang.h

@@ -15,7 +15,7 @@
  * Some hardware works well with requests at spi_transfer scope:
  *
  *   -	Drivers leveraging smarter hardware, with fifos or DMA; or for half
- *	duplex (MicroWire) controllers.  Provide chipslect() and txrx_bufs(),
+ *	duplex (MicroWire) controllers.  Provide chipselect() and txrx_bufs(),
  *	and custom setup()/cleanup() methods.
  */
 

kernel/time/clocksource.c

@@ -580,7 +580,7 @@ sysfs_show_current_clocksources(struct sys_device *dev,
  * @count:	length of buffer
  *
  * Takes input from sysfs interface for manually overriding the default
- * clocksource selction.
+ * clocksource selection.
  */
 static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 					  struct sysdev_attribute *attr,

sound/pci/hda/patch_cirrus.c

@@ -947,7 +947,7 @@ static void init_input(struct hda_codec *codec)
 		coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */
 	if (is_active_pin(codec, CS_DMIC1_PIN_NID))
 		coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0 
-				 * No effect if SPDIF_OUT2 is slected in 
+				 * No effect if SPDIF_OUT2 is selected in 
 				 * IDX_SPDIF_CTL.
 				  */
 	cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);