diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e01e5a081def..88e94c5506a1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -15,6 +15,10 @@ i2c0 = &i2c0; }; + chosen { + stdout-path = &uart0; + }; + memory { reg = <0x0 0x08000000>; }; diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 63d82bbc05e9..39e1d163c427 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2805,25 +2805,20 @@ set_initial_features(void) /* Enable GMAC for now for PCI probing. It will be disabled * later on after PCI probe */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { + for_each_node_by_name(np, "ethernet") if (of_device_is_compatible(np, "K2-GMAC")) g5_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); - } /* Enable FW before PCI probe. Will be disabled later on * Note: We should have a batter way to check that we are * dealing with uninorth internal cell and not a PCI cell * on the external PCI. The code below works though. */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { + for_each_node_by_name(np, "firewire") { if (of_device_is_compatible(np, "pci106b,5811")) { macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; g5_fw_enable(np, 0, 1); } - np = of_find_node_by_name(np, "firewire"); } } #else /* CONFIG_POWER4 */ @@ -2834,13 +2829,11 @@ set_initial_features(void) /* Enable GMAC for now for PCI probing. It will be disabled * later on after PCI probe */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { + for_each_node_by_name(np, "ethernet") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && of_device_is_compatible(np, "gmac")) core99_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); } /* Enable FW before PCI probe. Will be disabled later on @@ -2848,8 +2841,7 @@ set_initial_features(void) * dealing with uninorth internal cell and not a PCI cell * on the external PCI. The code below works though. */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { + for_each_node_by_name(np, "firewire") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && (of_device_is_compatible(np, "pci106b,18") || @@ -2858,18 +2850,16 @@ set_initial_features(void) macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; core99_firewire_enable(np, 0, 1); } - np = of_find_node_by_name(np, "firewire"); } /* Enable ATA-100 before PCI probe. */ np = of_find_node_by_name(NULL, "ata-6"); - while(np) { + for_each_node_by_name(np, "ata-6") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && of_device_is_compatible(np, "kauai-ata")) { core99_ata100_enable(np, 1); } - np = of_find_node_by_name(np, "ata-6"); } /* Switch airport off */ diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index cf7009b8c7b6..7e868ccf3b0d 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -698,7 +698,7 @@ static void __init fixup_nec_usb2(void) { struct device_node *nec; - for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) { + for_each_node_by_name(nec, "usb") { struct pci_controller *hose; u32 data; const u32 *prop; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 5cbd4d67d5c4..af094ae03dbb 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -577,7 +577,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus) int ok; /* Look for the clock chip */ - while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) { + for_each_node_by_name(cc, "i2c-hwclock") { p = of_get_parent(cc); ok = p && of_device_is_compatible(p, "uni-n-i2c"); of_node_put(p); diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c index 44e0b55a2a02..366bd221edec 100644 --- a/arch/powerpc/platforms/powermac/udbg_adb.c +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -191,7 +191,7 @@ int __init udbg_adb_init(int force_btext) * of type "adb". If not, we return a failure, but we keep the * bext output set for now */ - for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) { + for_each_node_by_name(np, "keyboard") { struct device_node *parent = of_get_parent(np); int found = (parent && strcmp(parent->type, "adb") == 0); of_node_put(parent); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index f2f40e64658f..cd6b4cde0de3 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -232,8 +232,7 @@ static void __init pseries_discover_pic(void) struct device_node *np; const char *typep; - for (np = NULL; (np = of_find_node_by_name(np, - "interrupt-controller"));) { + for_each_node_by_name(np, "interrupt-controller") { typep = of_get_property(np, "compatible", NULL); if (strstr(typep, "open-pic")) { pSeries_mpic_node = of_node_get(np); diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c index 8bc422977b5b..4ff86878727f 100644 --- a/drivers/cpufreq/pmac64-cpufreq.c +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -499,8 +499,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) } /* Lookup the i2c hwclock */ - for (hwclock = NULL; - (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ + for_each_node_by_name(hwclock, "i2c-hwclock") { const char *loc = of_get_property(hwclock, "hwctrl-location", NULL); if (loc == NULL) diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index 374b57fc596d..a12c8552f6a6 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -134,8 +134,7 @@ static void cell_edac_init_csrows(struct mem_ctl_info *mci) int j; u32 nr_pages; - for (np = NULL; - (np = of_find_node_by_name(np, "memory")) != NULL;) { + for_each_node_by_name(np, "memory") { struct resource r; /* We "know" that the Cell firmware only creates one entry diff --git a/drivers/of/base.c b/drivers/of/base.c index b9864806e9b8..e4f95ba0a3eb 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -17,6 +17,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -35,7 +36,7 @@ struct device_node *of_allnodes; EXPORT_SYMBOL(of_allnodes); struct device_node *of_chosen; struct device_node *of_aliases; -static struct device_node *of_stdout; +struct device_node *of_stdout; static struct kset *of_kset; @@ -2062,9 +2063,12 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) of_chosen = of_find_node_by_path("/chosen@0"); if (of_chosen) { + /* linux,stdout-path and /aliases/stdout are for legacy compatibility */ const char *name = of_get_property(of_chosen, "stdout-path", NULL); if (!name) name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (IS_ENABLED(CONFIG_PPC) && !name) + name = of_get_property(of_aliases, "stdout", NULL); if (name) of_stdout = of_find_node_by_path(name); } @@ -2180,20 +2184,22 @@ const char *of_prop_next_string(struct property *prop, const char *cur) EXPORT_SYMBOL_GPL(of_prop_next_string); /** - * of_device_is_stdout_path - check if a device node matches the - * linux,stdout-path property + * of_console_check() - Test and setup console for DT setup + * @dn - Pointer to device node + * @name - Name to use for preferred console without index. ex. "ttyS" + * @index - Index to use for preferred console. * - * Check if this device node matches the linux,stdout-path property - * in the chosen node. return true if yes, false otherwise. + * Check if the given device node matches the stdout-path property in the + * /chosen node. If it does then register it as the preferred console and return + * TRUE. Otherwise return FALSE. */ -int of_device_is_stdout_path(struct device_node *dn) +bool of_console_check(struct device_node *dn, char *name, int index) { - if (!of_stdout) + if (!dn || dn != of_stdout || console_set_on_cmdline) return false; - - return of_stdout == dn; + return add_preferred_console(name, index, NULL); } -EXPORT_SYMBOL_GPL(of_device_is_stdout_path); +EXPORT_SYMBOL_GPL(of_console_check); /** * of_find_next_cache_node - Find a node's subsidiary cache diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 93aa29f6d39c..f2945fa73d4f 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -375,11 +375,11 @@ static void __exit cleanup_slots(void) static int __init rpaphp_init(void) { - struct device_node *dn = NULL; + struct device_node *dn; info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - while ((dn = of_find_node_by_name(dn, "pci"))) + for_each_node_by_name(dn, "pci") rpaphp_add_slot(dn); return 0; diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 0419b69e270f..4f485e88f60c 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -108,55 +108,23 @@ static void disable_tx_interrupt(struct ehv_bc_data *bc) * * The byte channel to be used for the console is specified via a "stdout" * property in the /chosen node. - * - * For compatible with legacy device trees, we also look for a "stdout" alias. */ static int find_console_handle(void) { - struct device_node *np, *np2; + struct device_node *np = of_stdout; const char *sprop = NULL; const uint32_t *iprop; - np = of_find_node_by_path("/chosen"); - if (np) - sprop = of_get_property(np, "stdout-path", NULL); - - if (!np || !sprop) { - of_node_put(np); - np = of_find_node_by_name(NULL, "aliases"); - if (np) - sprop = of_get_property(np, "stdout", NULL); - } - - if (!sprop) { - of_node_put(np); - return 0; - } - /* We don't care what the aliased node is actually called. We only * care if it's compatible with "epapr,hv-byte-channel", because that - * indicates that it's a byte channel node. We use a temporary - * variable, 'np2', because we can't release 'np' until we're done with - * 'sprop'. + * indicates that it's a byte channel node. */ - np2 = of_find_node_by_path(sprop); - of_node_put(np); - np = np2; - if (!np) { - pr_warning("ehv-bc: stdout node '%s' does not exist\n", sprop); + if (!np || !of_device_is_compatible(np, "epapr,hv-byte-channel")) return 0; - } - - /* Is it a byte channel? */ - if (!of_device_is_compatible(np, "epapr,hv-byte-channel")) { - of_node_put(np); - return 0; - } stdout_irq = irq_of_parse_and_map(np, 0); if (stdout_irq == NO_IRQ) { - pr_err("ehv-bc: no 'interrupts' property in %s node\n", sprop); - of_node_put(np); + pr_err("ehv-bc: no 'interrupts' property in %s node\n", np->full_name); return 0; } @@ -167,12 +135,9 @@ static int find_console_handle(void) if (!iprop) { pr_err("ehv-bc: no 'hv-handle' property in %s node\n", np->name); - of_node_put(np); return 0; } stdout_bc = be32_to_cpu(*iprop); - - of_node_put(np); return 1; } diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index a585079b4b38..a2cc5f834c63 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -342,22 +342,13 @@ static void udbg_init_opal_common(void) void __init hvc_opal_init_early(void) { - struct device_node *stdout_node = NULL; + struct device_node *stdout_node = of_node_get(of_stdout); const __be32 *termno; - const char *name = NULL; const struct hv_ops *ops; u32 index; - /* find the boot console from /chosen/stdout */ - if (of_chosen) - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name) { - stdout_node = of_find_node_by_path(name); - if (!stdout_node) { - pr_err("hvc_opal: Failed to locate default console!\n"); - return; - } - } else { + /* If the console wasn't in /chosen, try /ibm,opal */ + if (!stdout_node) { struct device_node *opal, *np; /* Current OPAL takeover doesn't provide the stdout diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index b594abfbf21e..5618b5fc7500 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -404,42 +404,35 @@ module_exit(hvc_vio_exit); void __init hvc_vio_init_early(void) { - struct device_node *stdout_node; const __be32 *termno; const char *name; const struct hv_ops *ops; /* find the boot console from /chosen/stdout */ - if (!of_chosen) + if (!of_stdout) return; - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return; - stdout_node = of_find_node_by_path(name); - if (!stdout_node) - return; - name = of_get_property(stdout_node, "name", NULL); + name = of_get_property(of_stdout, "name", NULL); if (!name) { printk(KERN_WARNING "stdout node missing 'name' property!\n"); - goto out; + return; } /* Check if it's a virtual terminal */ if (strncmp(name, "vty", 3) != 0) - goto out; - termno = of_get_property(stdout_node, "reg", NULL); + return; + termno = of_get_property(of_stdout, "reg", NULL); if (termno == NULL) - goto out; + return; hvterm_priv0.termno = of_read_number(termno, 1); spin_lock_init(&hvterm_priv0.buf_lock); hvterm_privs[0] = &hvterm_priv0; /* Check the protocol */ - if (of_device_is_compatible(stdout_node, "hvterm1")) { + if (of_device_is_compatible(of_stdout, "hvterm1")) { hvterm_priv0.proto = HV_PROTOCOL_RAW; ops = &hvterm_raw_ops; } - else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { + else if (of_device_is_compatible(of_stdout, "hvterm-protocol")) { hvterm_priv0.proto = HV_PROTOCOL_HVSI; ops = &hvterm_hvsi_ops; hvsilib_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, @@ -447,7 +440,7 @@ void __init hvc_vio_init_early(void) /* HVSI, perform the handshake now */ hvsilib_establish(&hvterm_priv0.hvsi); } else - goto out; + return; udbg_putc = udbg_hvc_putc; udbg_getc = udbg_hvc_getc; udbg_getc_poll = udbg_hvc_getc_poll; @@ -456,14 +449,12 @@ void __init hvc_vio_init_early(void) * backend for HVSI, only do udbg */ if (hvterm_priv0.proto == HV_PROTOCOL_HVSI) - goto out; + return; #endif /* Check whether the user has requested a different console. */ if (!strstr(cmd_line, "console=")) add_preferred_console("hvc", 0, NULL); hvc_instantiate(0, 0, ops); -out: - of_node_put(stdout_node); } /* call this from early_init() for a working debug console on diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 8193635103ee..01e180bc6b5d 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1650,8 +1650,7 @@ static int __init pmz_probe(void) /* * Find all escc chips in the system */ - node_p = of_find_node_by_name(NULL, "escc"); - while (node_p) { + for_each_node_by_name(node_p, "escc") { /* * First get channel A/B node pointers * @@ -1669,7 +1668,7 @@ static int __init pmz_probe(void) of_node_put(node_b); printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", (!node_a) ? 'a' : 'b', node_p->full_name); - goto next; + continue; } /* @@ -1696,11 +1695,9 @@ static int __init pmz_probe(void) of_node_put(node_b); memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); - goto next; + continue; } count += 2; -next: - node_p = of_find_node_by_name(node_p, "escc"); } pmz_ports_count = count; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index fbf6c5ad222f..3ce68f962c92 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -2615,6 +2616,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_init(&uport->lock); lockdep_set_class(&uport->lock, &port_lock_key); } + if (uport->cons && uport->dev) + of_console_check(uport->dev->of_node, uport->cons->name, uport->line); uart_configure_port(drv, state, uport); diff --git a/include/linux/of.h b/include/linux/of.h index 196b34c1ef4e..f0d256273c83 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -113,6 +113,7 @@ static inline void of_node_put(struct device_node *node) { } extern struct device_node *of_allnodes; extern struct device_node *of_chosen; extern struct device_node *of_aliases; +extern struct device_node *of_stdout; extern raw_spinlock_t devtree_lock; static inline bool of_have_populated_dt(void) @@ -352,7 +353,7 @@ const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, */ const char *of_prop_next_string(struct property *prop, const char *cur); -int of_device_is_stdout_path(struct device_node *dn); +bool of_console_check(struct device_node *dn, char *name, int index); #else /* CONFIG_OF */ @@ -564,9 +565,9 @@ static inline int of_machine_is_compatible(const char *compat) return 0; } -static inline int of_device_is_stdout_path(struct device_node *dn) +static inline bool of_console_check(const struct device_node *dn, const char *name, int index) { - return 0; + return false; } static inline const __be32 *of_prop_next_u32(struct property *prop, diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index 7a43c0c38316..8a431bcb056c 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -992,9 +992,9 @@ static int snd_pmac_detect(struct snd_pmac *chip) return -ENODEV; if (!sound) { - sound = of_find_node_by_name(NULL, "sound"); - while (sound && sound->parent != chip->node) - sound = of_find_node_by_name(sound, "sound"); + for_each_node_by_name(sound, "sound") + if (sound->parent == chip->node) + break; } if (! sound) { of_node_put(chip->node);