redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

usb: chipidea: add hw_wait_phy_stable for getting stable status

Browse source 
The phy needs some delay to output the stable status from low
power mode. And for OTGSC, the status inputs are debounced
using a 1 ms time constant, so, delay 2ms for controller to get
the stable status(like vbus and id) when the phy leaves low power.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Peter Chen 2014-11-26 13:44:28 +08:00 committed by Greg Kroah-Hartman
parent 6d037db640
commit b82613cf09
1 changed files with 16 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
drivers/usb/chipidea/core.c
View file

@ -190,6 +190,17 @@ u8 hw_port_test_get(struct ci_hdrc *ci)
return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
}
static void hw_wait_phy_stable(void)
{
/*
* The phy needs some delay to output the stable status from low
* power mode. And for OTGSC, the status inputs are debounced
* using a 1 ms time constant, so, delay 2ms for controller to get
* the stable status, like vbus and id when the phy leaves low power.
*/
usleep_range(2000, 2500);
}
/* The PHY enters/leaves low power mode */
static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
{
@ -351,7 +362,9 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
case USBPHY_INTERFACE_MODE_UTMIW:
case USBPHY_INTERFACE_MODE_HSIC:
ret = _ci_usb_phy_init(ci);
if (ret)
if (!ret)
hw_wait_phy_stable();
else
return ret;
hw_phymode_configure(ci);
break;
@ -364,6 +377,8 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
break;
default:
ret = _ci_usb_phy_init(ci);
if (!ret)
hw_wait_phy_stable();
}
return ret;
@ -667,13 +682,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "unable to init phy: %d\n", ret);
return ret;
} else {
/*
* The delay to sync PHY's status, the maximum delay is
* 2ms since the otgsc uses 1ms timer to debounce the
* PHY's input
*/
usleep_range(2000, 2500);
}
ci->hw_bank.phys = res->start;