iio: Add driver for Infineon DPS310
The DPS310 is a temperature and pressure sensor. It can be accessed over i2c and SPI, but this driver only supports polling over i2c. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>alistair/sunxi64-5.4-dsi
Joel Stanley
Jonathan Cameron
parent
bc4054b55f
commit
ba6ec48e76
|
|
@ -7761,6 +7761,12 @@ W: http://industrypack.sourceforge.net
|
|||
S: Maintained
|
||||
F: drivers/ipack/
|
||||
|
||||
INFINEON DPS310 Driver
|
||||
M: Eddie James <eajames@linux.ibm.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
F: drivers/iio/pressure/dps310.c
|
||||
S: Maintained
|
||||
|
||||
INFINIBAND SUBSYSTEM
|
||||
M: Doug Ledford <dledford@redhat.com>
|
||||
M: Jason Gunthorpe <jgg@mellanox.com>
|
||||
|
|
|
|||
|
|
@ -52,6 +52,17 @@ config IIO_CROS_EC_BARO
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called cros_ec_baro.
|
||||
|
||||
config DPS310
|
||||
tristate "Infineon DPS310 pressure and temperature sensor"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
Support for the Infineon DPS310 digital barometric pressure sensor.
|
||||
It can be accessed over I2C bus.
|
||||
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called dps310.
|
||||
|
||||
config HID_SENSOR_PRESS
|
||||
depends on HID_SENSOR_HUB
|
||||
select IIO_BUFFER
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@ obj-$(CONFIG_BMP280) += bmp280.o
|
|||
bmp280-objs := bmp280-core.o bmp280-regmap.o
|
||||
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
|
||||
obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
|
||||
obj-$(CONFIG_DPS310) += dps310.o
|
||||
obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
|
||||
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
|
||||
obj-$(CONFIG_HP03) += hp03.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,468 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright IBM Corp 2019
|
||||
/*
|
||||
* The DPS310 is a barometric pressure and temperature sensor.
|
||||
* Currently only reading a single temperature is supported by
|
||||
* this driver.
|
||||
*
|
||||
* https://www.infineon.com/dgdl/?fileId=5546d462576f34750157750826c42242
|
||||
*
|
||||
* Temperature calculation:
|
||||
* c0 * 0.5 + c1 * T_raw / kT °C
|
||||
*
|
||||
* TODO:
|
||||
* - Pressure sensor readings
|
||||
* - Optionally support the FIFO
|
||||
*/
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
|
||||
#define DPS310_DEV_NAME "dps310"
|
||||
|
||||
#define DPS310_PRS_B0 0x00
|
||||
#define DPS310_PRS_B1 0x01
|
||||
#define DPS310_PRS_B2 0x02
|
||||
#define DPS310_TMP_B0 0x03
|
||||
#define DPS310_TMP_B1 0x04
|
||||
#define DPS310_TMP_B2 0x05
|
||||
#define DPS310_PRS_CFG 0x06
|
||||
#define DPS310_TMP_CFG 0x07
|
||||
#define DPS310_TMP_RATE_BITS GENMASK(6, 4)
|
||||
#define DPS310_TMP_PRC_BITS GENMASK(3, 0)
|
||||
#define DPS310_TMP_EXT BIT(7)
|
||||
#define DPS310_MEAS_CFG 0x08
|
||||
#define DPS310_MEAS_CTRL_BITS GENMASK(2, 0)
|
||||
#define DPS310_PRS_EN BIT(0)
|
||||
#define DPS310_TEMP_EN BIT(1)
|
||||
#define DPS310_BACKGROUND BIT(2)
|
||||
#define DPS310_PRS_RDY BIT(4)
|
||||
#define DPS310_TMP_RDY BIT(5)
|
||||
#define DPS310_SENSOR_RDY BIT(6)
|
||||
#define DPS310_COEF_RDY BIT(7)
|
||||
#define DPS310_CFG_REG 0x09
|
||||
#define DPS310_INT_HL BIT(7)
|
||||
#define DPS310_TMP_SHIFT_EN BIT(3)
|
||||
#define DPS310_PRS_SHIFT_EN BIT(4)
|
||||
#define DPS310_FIFO_EN BIT(5)
|
||||
#define DPS310_SPI_EN BIT(6)
|
||||
#define DPS310_RESET 0x0c
|
||||
#define DPS310_RESET_MAGIC 0x09
|
||||
#define DPS310_COEF_BASE 0x10
|
||||
#define DPS310_COEF_SRC 0x28
|
||||
|
||||
/* Make sure sleep time is <= 20ms for usleep_range */
|
||||
#define DPS310_POLL_SLEEP_US(t) min(20000, (t) / 8)
|
||||
/* Silently handle error in rate value here */
|
||||
#define DPS310_POLL_TIMEOUT_US(rc) ((rc) <= 0 ? 1000000 : 1000000 / (rc))
|
||||
|
||||
#define DPS310_PRS_BASE DPS310_PRS_B0
|
||||
#define DPS310_TMP_BASE DPS310_TMP_B0
|
||||
|
||||
/*
|
||||
* These values (defined in the spec) indicate how to scale the raw register
|
||||
* values for each level of precision available.
|
||||
*/
|
||||
static const int scale_factors[] = {
|
||||
524288,
|
||||
1572864,
|
||||
3670016,
|
||||
7864320,
|
||||
253952,
|
||||
516096,
|
||||
1040384,
|
||||
2088960,
|
||||
};
|
||||
|
||||
struct dps310_data {
|
||||
struct i2c_client *client;
|
||||
struct regmap *regmap;
|
||||
struct mutex lock; /* Lock for sequential HW access functions */
|
||||
|
||||
s32 c0, c1;
|
||||
s32 temp_raw;
|
||||
};
|
||||
|
||||
static const struct iio_chan_spec dps310_channels[] = {
|
||||
{
|
||||
.type = IIO_TEMP,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
|
||||
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
||||
BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
},
|
||||
};
|
||||
|
||||
/* To be called after checking the COEF_RDY bit in MEAS_CFG */
|
||||
static int dps310_get_temp_coef(struct dps310_data *data)
|
||||
{
|
||||
int rc;
|
||||
u8 coef[3];
|
||||
u32 c0, c1;
|
||||
|
||||
/*
|
||||
* Read temperature calibration coefficients c0 and c1 from the
|
||||
* COEF register. The numbers are 12-bit 2's compliment numbers
|
||||
*/
|
||||
rc = regmap_bulk_read(data->regmap, DPS310_COEF_BASE, coef,
|
||||
sizeof(coef));
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
c0 = (coef[0] << 4) | (coef[1] >> 4);
|
||||
data->c0 = sign_extend32(c0, 11);
|
||||
|
||||
c1 = ((coef[1] & GENMASK(3, 0)) << 8) | coef[2];
|
||||
data->c1 = sign_extend32(c1, 11);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dps310_get_temp_precision(struct dps310_data *data)
|
||||
{
|
||||
int rc;
|
||||
int val;
|
||||
|
||||
rc = regmap_read(data->regmap, DPS310_TMP_CFG, &val);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/*
|
||||
* Scale factor is bottom 4 bits of the register, but 1111 is
|
||||
* reserved so just grab bottom three
|
||||
*/
|
||||
return BIT(val & GENMASK(2, 0));
|
||||
}
|
||||
|
||||
/* Called with lock held */
|
||||
static int dps310_set_temp_precision(struct dps310_data *data, int val)
|
||||
{
|
||||
int rc;
|
||||
u8 shift_en;
|
||||
|
||||
if (val < 0 || val > 128)
|
||||
return -EINVAL;
|
||||
|
||||
shift_en = val >= 16 ? DPS310_TMP_SHIFT_EN : 0;
|
||||
rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
|
||||
DPS310_TMP_SHIFT_EN, shift_en);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
return regmap_update_bits(data->regmap, DPS310_TMP_CFG,
|
||||
DPS310_TMP_PRC_BITS, ilog2(val));
|
||||
}
|
||||
|
||||
/* Called with lock held */
|
||||
static int dps310_set_temp_samp_freq(struct dps310_data *data, int freq)
|
||||
{
|
||||
u8 val;
|
||||
|
||||
if (freq < 0 || freq > 128)
|
||||
return -EINVAL;
|
||||
|
||||
val = ilog2(freq) << 4;
|
||||
|
||||
return regmap_update_bits(data->regmap, DPS310_TMP_CFG,
|
||||
DPS310_TMP_RATE_BITS, val);
|
||||
}
|
||||
|
||||
static int dps310_get_temp_samp_freq(struct dps310_data *data)
|
||||
{
|
||||
int rc;
|
||||
int val;
|
||||
|
||||
rc = regmap_read(data->regmap, DPS310_TMP_CFG, &val);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
return BIT((val & DPS310_TMP_RATE_BITS) >> 4);
|
||||
}
|
||||
|
||||
static int dps310_get_temp_k(struct dps310_data *data)
|
||||
{
|
||||
int rc = dps310_get_temp_precision(data);
|
||||
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
return scale_factors[ilog2(rc)];
|
||||
}
|
||||
|
||||
static int dps310_read_temp(struct dps310_data *data)
|
||||
{
|
||||
int rc;
|
||||
int rate;
|
||||
int ready;
|
||||
int timeout;
|
||||
s32 raw;
|
||||
u8 val[3];
|
||||
|
||||
if (mutex_lock_interruptible(&data->lock))
|
||||
return -EINTR;
|
||||
|
||||
rate = dps310_get_temp_samp_freq(data);
|
||||
timeout = DPS310_POLL_TIMEOUT_US(rate);
|
||||
|
||||
/* Poll for sensor readiness; base the timeout upon the sample rate. */
|
||||
rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
|
||||
ready & DPS310_TMP_RDY,
|
||||
DPS310_POLL_SLEEP_US(timeout), timeout);
|
||||
if (rc < 0)
|
||||
goto done;
|
||||
|
||||
rc = regmap_bulk_read(data->regmap, DPS310_TMP_BASE, val, sizeof(val));
|
||||
if (rc < 0)
|
||||
goto done;
|
||||
|
||||
raw = (val[0] << 16) | (val[1] << 8) | val[2];
|
||||
data->temp_raw = sign_extend32(raw, 23);
|
||||
|
||||
done:
|
||||
mutex_unlock(&data->lock);
|
||||
return rc;
|
||||
}
|
||||
|
||||
static bool dps310_is_writeable_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case DPS310_PRS_CFG:
|
||||
case DPS310_TMP_CFG:
|
||||
case DPS310_MEAS_CFG:
|
||||
case DPS310_CFG_REG:
|
||||
case DPS310_RESET:
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static bool dps310_is_volatile_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case DPS310_PRS_B0:
|
||||
case DPS310_PRS_B1:
|
||||
case DPS310_PRS_B2:
|
||||
case DPS310_TMP_B0:
|
||||
case DPS310_TMP_B1:
|
||||
case DPS310_TMP_B2:
|
||||
case DPS310_MEAS_CFG:
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static int dps310_write_raw(struct iio_dev *iio,
|
||||
struct iio_chan_spec const *chan, int val,
|
||||
int val2, long mask)
|
||||
{
|
||||
int rc;
|
||||
struct dps310_data *data = iio_priv(iio);
|
||||
|
||||
if (chan->type != IIO_TEMP)
|
||||
return -EINVAL;
|
||||
|
||||
if (mutex_lock_interruptible(&data->lock))
|
||||
return -EINTR;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
rc = dps310_set_temp_samp_freq(data, val);
|
||||
break;
|
||||
|
||||
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
||||
rc = dps310_set_temp_precision(data, val);
|
||||
break;
|
||||
|
||||
default:
|
||||
rc = -EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
mutex_unlock(&data->lock);
|
||||
return rc;
|
||||
}
|
||||
|
||||
static int dps310_calculate_temp(struct dps310_data *data)
|
||||
{
|
||||
s64 c0;
|
||||
s64 t;
|
||||
int kt = dps310_get_temp_k(data);
|
||||
|
||||
if (kt < 0)
|
||||
return kt;
|
||||
|
||||
/* Obtain inverse-scaled offset */
|
||||
c0 = div_s64((s64)kt * (s64)data->c0, 2);
|
||||
|
||||
/* Add the offset to the unscaled temperature */
|
||||
t = c0 + ((s64)data->temp_raw * (s64)data->c1);
|
||||
|
||||
/* Convert to milliCelsius and scale the temperature */
|
||||
return (int)div_s64(t * 1000LL, kt);
|
||||
}
|
||||
|
||||
static int dps310_read_raw(struct iio_dev *iio,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct dps310_data *data = iio_priv(iio);
|
||||
int rc;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
rc = dps310_get_temp_samp_freq(data);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
*val = rc;
|
||||
return IIO_VAL_INT;
|
||||
|
||||
case IIO_CHAN_INFO_PROCESSED:
|
||||
rc = dps310_read_temp(data);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
rc = dps310_calculate_temp(data);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
*val = rc;
|
||||
return IIO_VAL_INT;
|
||||
|
||||
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
||||
rc = dps310_get_temp_precision(data);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
*val = rc;
|
||||
return IIO_VAL_INT;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static void dps310_reset(void *action_data)
|
||||
{
|
||||
struct dps310_data *data = action_data;
|
||||
|
||||
regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC);
|
||||
}
|
||||
|
||||
static const struct regmap_config dps310_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.writeable_reg = dps310_is_writeable_reg,
|
||||
.volatile_reg = dps310_is_volatile_reg,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
.max_register = DPS310_COEF_SRC,
|
||||
};
|
||||
|
||||
static const struct iio_info dps310_info = {
|
||||
.read_raw = dps310_read_raw,
|
||||
.write_raw = dps310_write_raw,
|
||||
};
|
||||
|
||||
static int dps310_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct dps310_data *data;
|
||||
struct iio_dev *iio;
|
||||
int rc, ready;
|
||||
|
||||
iio = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!iio)
|
||||
return -ENOMEM;
|
||||
|
||||
data = iio_priv(iio);
|
||||
data->client = client;
|
||||
mutex_init(&data->lock);
|
||||
|
||||
iio->dev.parent = &client->dev;
|
||||
iio->name = id->name;
|
||||
iio->channels = dps310_channels;
|
||||
iio->num_channels = ARRAY_SIZE(dps310_channels);
|
||||
iio->info = &dps310_info;
|
||||
iio->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
data->regmap = devm_regmap_init_i2c(client, &dps310_regmap_config);
|
||||
if (IS_ERR(data->regmap))
|
||||
return PTR_ERR(data->regmap);
|
||||
|
||||
/* Register to run the device reset when the device is removed */
|
||||
rc = devm_add_action_or_reset(&client->dev, dps310_reset, data);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
/*
|
||||
* Set up external (MEMS) temperature sensor in single sample, one
|
||||
* measurement per second mode
|
||||
*/
|
||||
rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* Temp shift is disabled when PRC <= 8 */
|
||||
rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
|
||||
DPS310_TMP_SHIFT_EN, 0);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* MEAS_CFG doesn't update correctly unless first written with 0 */
|
||||
rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
|
||||
DPS310_MEAS_CTRL_BITS, 0);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/* Turn on temperature measurement in the background */
|
||||
rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
|
||||
DPS310_MEAS_CTRL_BITS,
|
||||
DPS310_TEMP_EN | DPS310_BACKGROUND);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
/*
|
||||
* Calibration coefficients required for reporting temperature.
|
||||
* They are available 40ms after the device has started
|
||||
*/
|
||||
rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
|
||||
ready & DPS310_COEF_RDY, 10000, 40000);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
rc = dps310_get_temp_coef(data);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
rc = devm_iio_device_register(&client->dev, iio);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
i2c_set_clientdata(client, iio);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id dps310_id[] = {
|
||||
{ DPS310_DEV_NAME, 0 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, dps310_id);
|
||||
|
||||
static struct i2c_driver dps310_driver = {
|
||||
.driver = {
|
||||
.name = DPS310_DEV_NAME,
|
||||
},
|
||||
.probe = dps310_probe,
|
||||
.id_table = dps310_id,
|
||||
};
|
||||
module_i2c_driver(dps310_driver);
|
||||
|
||||
MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
|
||||
MODULE_DESCRIPTION("Infineon DPS310 pressure and temperature sensor");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue