diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index ee090e51653a..4d5f5fec43a3 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -130,6 +130,7 @@ Hardware Monitoring Kernel Drivers
    pcf8591
    pmbus
    powr1220
+   pxe1610
    pwm-fan
    raspberrypi-hwmon
    sch5627
diff --git a/Documentation/hwmon/pxe1610 b/Documentation/hwmon/pxe1610.rst
similarity index 82%
rename from Documentation/hwmon/pxe1610
rename to Documentation/hwmon/pxe1610.rst
index 211cedeefb44..4f2388840d06 100644
--- a/Documentation/hwmon/pxe1610
+++ b/Documentation/hwmon/pxe1610.rst
@@ -2,19 +2,29 @@ Kernel driver pxe1610
 =====================
 
 Supported chips:
+
   * Infineon PXE1610
+
     Prefix: 'pxe1610'
+
     Addresses scanned: -
+
     Datasheet: Datasheet is not publicly available.
 
   * Infineon PXE1110
+
     Prefix: 'pxe1110'
+
     Addresses scanned: -
+
     Datasheet: Datasheet is not publicly available.
 
   * Infineon PXM1310
+
     Prefix: 'pxm1310'
+
     Addresses scanned: -
+
     Datasheet: Datasheet is not publicly available.
 
 Author: Vijay Khemka <vijaykhemka@fb.com>
@@ -25,14 +35,19 @@ Description
 
 PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
 and compliant to
-	-- Intel VR13 DC-DC converter specifications.
-	-- Intel SVID protocol.
+
+	- Intel VR13 DC-DC converter specifications.
+	- Intel SVID protocol.
+
 Used for Vcore power regulation for Intel VR13 based microprocessors
-	-- Servers, Workstations, and High-end desktops
+
+	- Servers, Workstations, and High-end desktops
 
 PXM1310 is a Multi-rail Controller and it is compliant to
-	-- Intel VR13 DC-DC converter specifications.
-	-- Intel SVID protocol.
+
+	- Intel VR13 DC-DC converter specifications.
+	- Intel SVID protocol.
+
 Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
 IMVP8 based systems
 
@@ -44,10 +59,10 @@ This driver does not probe for PMBus devices. You will have
 to instantiate devices explicitly.
 
 Example: the following commands will load the driver for an PXE1610
-at address 0x70 on I2C bus #4:
+at address 0x70 on I2C bus #4::
 
-# modprobe pxe1610
-# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+    # modprobe pxe1610
+    # echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
 
 It can also be instantiated by declaring in device tree
 
@@ -55,6 +70,7 @@ It can also be instantiated by declaring in device tree
 Sysfs attributes
 ----------------
 
+======================  ====================================
 curr1_label		"iin"
 curr1_input		Measured input current
 curr1_alarm		Current high alarm
@@ -88,3 +104,4 @@ temp[1-3]_crit		Critical high temperature
 temp[1-3]_crit_alarm	Chip temperature critical high alarm
 temp[1-3]_max		Maximum temperature
 temp[1-3]_max_alarm	Chip temperature high alarm
+======================  ====================================