redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: Remove mach-msm and associated ARM architecture code 

The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.

[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
hifive-unleashed-5.1
Stephen Boyd 2015-03-13 11:09:34 -07:00 committed by Kumar Gala
parent 9eccca0843
commit c0c89fafa2
61 changed files with 8 additions and 8893 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/arm/00-INDEX
View File

@ -10,8 +10,6 @@ IXP4xx
- Intel IXP4xx Network processor.
Makefile
- Build sourcefiles as part of the Documentation-build for arm
msm/
- MSM specific documentation
Netwinder
- Netwinder specific documentation
Porting

176
Documentation/arm/msm/gpiomux.txt
View File

@ -1,176 +0,0 @@
This document provides an overview of the msm_gpiomux interface, which
is used to provide gpio pin multiplexing and configuration on mach-msm
targets.
History
=======
The first-generation API for gpio configuration & multiplexing on msm
is the function gpio_tlmm_config(). This function has a few notable
shortcomings, which led to its deprecation and replacement by gpiomux:
The 'disable' parameter: Setting the second parameter to
gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
processor in charge of the subsystem to perform a look-up into a
low-power table and apply the low-power/sleep setting for the pin.
As the msm family evolved this became problematic. Not all pins
have sleep settings, not all peripheral processors will accept requests
to apply said sleep settings, and not all msm targets have their gpio
subsystems managed by a peripheral processor. In order to get consistent
behavior on all targets, drivers are forced to ignore this parameter,
rendering it useless.
The 'direction' flag: for all mux-settings other than raw-gpio (0),
the output-enable bit of a gpio is hard-wired to a known
input (usually VDD or ground). For those settings, the direction flag
is meaningless at best, and deceptive at worst. In addition, using the
direction flag to change output-enable (OE) directly can cause trouble in
gpiolib, which has no visibility into gpio direction changes made
in this way. Direction control in gpio mode should be made through gpiolib.
Key Features of gpiomux
=======================
- A consistent interface across all generations of msm. Drivers can expect
the same results on every target.
- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib
are left to gpiolib and not duplicated here. gpiomux is written with the
intent that gpio_chips will call gpiomux reference-counting methods
from their request() and free() hooks, providing full integration.
- Tabular configuration. Instead of having to call gpio_tlmm_config
hundreds of times, gpio configuration is placed in a single table.
- Per-gpio sleep. Each gpio is individually reference counted, allowing only
those lines which are in use to be put in high-power states.
- 0 means 'do nothing': all flags are designed so that the default memset-zero
equates to a sensible default of 'no configuration', preventing users
from having to provide hundreds of 'no-op' configs for unused or
unwanted lines.
Usage
=====
To use gpiomux, provide configuration information for relevant gpio lines
in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured",
only those lines to be managed by gpiomux need to be specified. Here
is a completely fictional example:
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
[12] = {
.active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
};
To indicate that a gpio is in use, call msm_gpiomux_get() to increase
its reference count. To decrease the reference count, call msm_gpiomux_put().
The effect of this configuration is as follows:
When the system boots, gpios 12 and 34 will be initialized with their
'suspended' configurations. All other gpios, which were left unconfigured,
will not be touched.
When msm_gpiomux_get() is called on gpio 12 to raise its reference count
above 0, its active configuration will be applied. Since no other gpio
line has a valid active configuration, msm_gpiomux_get() will have no
effect on any other line.
When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
count to 0, their suspended configurations will be applied.
Since no other gpio line has a valid suspended configuration, no other
gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid
active configuration, this is effectively a no-op for gpio 34 as well,
with one small caveat, see the section "About Output-Enable Settings".
All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
they address some important issues. As unused entries (all those
except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
the used fields from the unused. In addition, the all-zero pattern
is a valid configuration! Therefore, gpiomux defines an additional bit
which is used to indicate when a field is used. This has the pleasant
side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
that a value should not be changed:
msm_gpiomux_write(0, GPIOMUX_VALID, 0);
replaces the active configuration of gpio 0 with an all-zero configuration,
but leaves the suspended configuration as it was.
Static Configurations
=====================
To install a static configuration, which is applied at boot and does
not change after that, install a configuration with a suspended component
but no active component, as in the previous example:
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
The suspended setting is applied during boot, and the lack of any valid
active setting prevents any other setting from being applied at runtime.
If other subsystems attempting to access the line is a concern, one could
*really* anchor the configuration down by calling msm_gpiomux_get on the
line at initialization to move the line into active mode. With the line
held, it will never be re-suspended, and with no valid active configuration,
no new configurations will be applied.
But then, if having other subsystems grabbing for the line is truly a concern,
it should be reserved with gpio_request instead, which carries an implicit
msm_gpiomux_get.
gpiomux and gpiolib
===================
It is expected that msm gpio_chips will call msm_gpiomux_get() and
msm_gpiomux_put() from their request and free hooks, like this fictional
example:
static int request(struct gpio_chip *chip, unsigned offset)
{
return msm_gpiomux_get(chip->base + offset);
}
static void free(struct gpio_chip *chip, unsigned offset)
{
msm_gpiomux_put(chip->base + offset);
}
...somewhere in a gpio_chip declaration...
.request = request,
.free = free,
This provides important functionality:
- It guarantees that a gpio line will have its 'active' config applied
when the line is requested, and will not be suspended while the line
remains requested; and
- It guarantees that gpio-direction settings from gpiolib behave sensibly.
See "About Output-Enable Settings."
This mechanism allows for "auto-request" of gpiomux lines via gpiolib
when it is suitable. Drivers wishing more exact control are, of course,
free to also use msm_gpiomux_set and msm_gpiomux_get.
About Output-Enable Settings
============================
Some msm targets do not have the ability to query the current gpio
configuration setting. This means that changes made to the output-enable
(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
Therefore, when gpiomux applies a configuration setting, any direction
settings which may have been applied by gpiolib are lost and the default
input settings are re-applied.
For this reason, drivers should not assume that gpio direction settings
continue to hold if they free and then re-request a gpio. This seems like
common sense - after all, anybody could have obtained the line in the
meantime - but it needs saying.
This also means that calls to msm_gpiomux_write will reset the OE bit,
which means that if the gpio line is held by a client of gpiolib and
msm_gpiomux_write is called, the direction setting has been lost and
gpiolib's internal state has been broken.
Release gpio lines before reconfiguring them.

20
MAINTAINERS
View File

@ -1244,22 +1244,6 @@ L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
F: drivers/video/fbdev/msm/
F: drivers/mmc/host/msm_sdcc.c
F: drivers/mmc/host/msm_sdcc.h
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/*/pm8???-*
F: drivers/mfd/ssbi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
@ -1317,6 +1301,10 @@ L: linux-soc@vger.kernel.org
S: Maintained
F: arch/arm/mach-qcom/
F: drivers/soc/qcom/
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/*/pm8???-*
F: drivers/mfd/ssbi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
ARM/RADISYS ENP2611 MACHINE SUPPORT

14
arch/arm/Kconfig
View File

@ -625,18 +625,6 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MSM
bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
interface to the modem processor which runs the baseband
stack and controls some vital subsystems
(clock and power control, etc).
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
@ -890,8 +878,6 @@ source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-meson/Kconfig"
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"

29
arch/arm/Kconfig.debug
View File

@ -448,25 +448,6 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
config DEBUG_MSM_UART
bool "Kernel low-level debugging messages via MSM UART"
depends on ARCH_MSM
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM devices.
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT #
MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
MSM7X30 0xaca00000 0xe1000000 UART1
MSM7X30 0xacb00000 0xe1000000 UART2
MSM7X30 0xacc00000 0xe1000000 UART3
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
options based on your needs.
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
@ -1295,7 +1276,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
@ -1388,7 +1369,6 @@ config DEBUG_UART_PHYS
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
@ -1433,7 +1413,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_NETX_UART || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
@ -1446,7 +1426,6 @@ config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
@ -1526,7 +1505,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_NETX_UART || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
@ -1556,7 +1535,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help

2
arch/arm/Makefile
View File

@ -136,7 +136,6 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
@ -170,7 +169,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx

121
arch/arm/configs/msm_defconfig
View File

@ -1,121 +0,0 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MSM=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_CLEANCACHE=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_RFKILL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_SERIAL=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_RTC_CLASS=y
CONFIG_STAGING=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_CIFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y

14
arch/arm/include/debug/msm.S
View File

@ -16,24 +16,17 @@
*/
.macro addruart, rp, rv, tmp
#ifdef CONFIG_DEBUG_UART_PHYS
ldr \rp, =CONFIG_DEBUG_UART_PHYS
ldr \rv, =CONFIG_DEBUG_UART_VIRT
#endif
.endm
.macro senduart, rd, rx
ARM_BE8(rev \rd, \rd )
#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
#else
str \rd, [\rx, #0x0C]
#endif
.endm
.macro waituart, rd, rx
#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd )
str \rd, [\rx, #0x40]
@ UARTDM reg. Read to induce delay
ldr \rd, [\rx, #0x08]
#else
@ wait for TX_READY
1001: ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
tst \rd, #0x04
beq 1001b
#endif
.endm
.macro busyuart, rd, rx

109
arch/arm/mach-msm/Kconfig
View File

@ -1,109 +0,0 @@
if ARCH_MSM
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
select ARCH_MSM_ARM11
select CPU_V6
select GPIO_MSM_V1
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
bool "MSM7x30"
select ARCH_MSM_SCORPION
select CPU_V7
select GPIO_MSM_V1
select MACH_MSM7X30_SURF # if !
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
bool "QSD8X50"
select ARCH_MSM_SCORPION
select CPU_V7
select GPIO_MSM_V1
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select CLKSRC_QCOM
select MSM_VIC
endchoice
config MSM_SOC_REV_A
bool
config ARCH_MSM_ARM11
bool
config ARCH_MSM_SCORPION
bool
config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
depends on ARCH_MSM7X00A
bool "Halibut Board (QCT SURF7201A)"
help
Support for the Qualcomm SURF7201A eval board.
config MACH_TROUT
depends on ARCH_MSM
depends on ARCH_MSM7X00A
bool "HTC Dream (aka trout)"
help
Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
config MACH_MSM7X30_SURF
depends on ARCH_MSM7X30
bool "MSM7x30 SURF"
help
Support for the Qualcomm MSM7x30 SURF eval board.
config MACH_QSD8X50_SURF
depends on ARCH_QSD8X50
bool "QSD8x50 SURF"
help
Support for the Qualcomm QSD8x50 SURF eval board.
config MACH_QSD8X50A_ST1_5
depends on ARCH_QSD8X50
bool "QSD8x50A ST1.5"
select MSM_SOC_REV_A
help
Support for the Qualcomm ST1.5.
endmenu
config MSM_SMD_PKG3
bool
config MSM_PROC_COMM
bool
config MSM_SMD
bool
config MSM_GPIOMUX
bool
help
Support for MSM V1 TLMM GPIOMUX architecture.
endif

23
arch/arm/mach-msm/Makefile
View File

@ -1,23 +0,0 @@
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o

3
arch/arm/mach-msm/Makefile.boot
View File

@ -1,3 +0,0 @@
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000

110
arch/arm/mach-msm/board-halibut.c
View File

@ -1,110 +0,0 @@
/* linux/arch/arm/mach-msm/board-halibut.c
*
* Copyright (C) 2007 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/setup.h>
#include <mach/irqs.h>
#include <mach/msm_iomap.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include "devices.h"
#include "common.h"
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x9C004300,
.end = 0x9C004400,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MSM_GPIO_TO_INT(49),
.end = MSM_GPIO_TO_INT(49),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev.platform_data = &smc91x_platdata,
};
static struct platform_device *devices[] __initdata = {
&msm_clock_7x01a,
&msm_device_gpio_7201,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
&msm_device_hsusb,
&msm_device_i2c,
&smc91x_device,
};
static void __init halibut_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
}
static void __init halibut_init_irq(void)
{
msm_init_irq();
}
static void __init halibut_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init halibut_map_io(void)
{
msm_map_common_io();
}
static void __init halibut_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
.atag_offset = 0x100,
.map_io = halibut_map_io,
.init_early = halibut_init_early,
.init_irq = halibut_init_irq,
.init_machine = halibut_init,
.init_late = halibut_init_late,
.init_time = msm7x01_timer_init,
MACHINE_END

191
arch/arm/mach-msm/board-msm7x30.c
View File

@ -1,191 +0,0 @@
/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
#include <asm/setup.h>
#include <mach/clk.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include <mach/vreg.h>
#include "devices.h"
#include "gpiomux.h"
#include "proc_comm.h"
#include "common.h"
static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
tag->u.mem.start = 0;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm7x30_reserve(void)
{
memblock_remove(0x0, SZ_2M);
}
static int hsusb_phy_init_seq[] = {
0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
0x02, 0x36, /* Disable CDR Auto Reset feature */
-1
};
static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
{
int ret;
if (assert) {
ret = clk_reset(link_clk, CLK_RESET_ASSERT);
if (ret)
pr_err("usb hs_clk assert failed\n");
} else {
ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb hs_clk deassert failed\n");
}
return ret;
}
static int hsusb_phy_clk_reset(struct clk *phy_clk)
{
int ret;
ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
if (ret) {
pr_err("usb phy clk assert failed\n");
return ret;
}
usleep_range(10000, 12000);
ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb phy clk deassert failed\n");
return ret;
}
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_DR_MODE_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
.link_clk_reset = hsusb_link_clk_reset,
.phy_clk_reset = hsusb_phy_clk_reset,
};
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
#ifdef CONFIG_SERIAL_MSM_CONSOLE
[49] = { /* UART2 RFR */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[50] = { /* UART2 CTS */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[51] = { /* UART2 RX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[52] = { /* UART2 TX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
#endif
};
static struct platform_device *devices[] __initdata = {
&msm_clock_7x30,
&msm_device_gpio_7x30,
#if defined(CONFIG_SERIAL_MSM)
&msm_device_uart2,
#endif
&msm_device_smd,
&msm_device_otg,
&msm_device_hsusb,
&msm_device_hsusb_host,
};
static void __init msm7x30_init_irq(void)
{
msm_init_irq();
}
static void __init msm7x30_init(void)
{
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init msm7x30_map_io(void)
{
msm_map_msm7x30_io();
}
static void __init msm7x30_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
.init_time = msm7x30_timer_init,
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
.init_time = msm7x30_timer_init,
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
.atag_offset = 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
.init_time = msm7x30_timer_init,
MACHINE_END

254
arch/arm/mach-msm/board-qsd8x50.c
View File

@ -1,254 +0,0 @@
/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/err.h>
#include <linux/clkdev.h>
#include <linux/smc91x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
#include <mach/clk.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "common.h"
static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156;
/* Leave smc91x resources empty here, as we'll fill them in
* at run-time: they vary from board to board, and the true
* configuration won't be known until boot.
*/
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct smc91x_platdata smc91x_platdata = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev.platform_data = &smc91x_platdata,
};
static int __init msm_init_smc91x(void)
{
if (machine_is_qsd8x50_surf()) {
smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
smc91x_resources[1].start =
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
smc91x_resources[1].end =
gpio_to_irq(qsd8x50_surf_smc91x_gpio);
platform_device_register(&smc91x_device);
}
return 0;
}
module_init(msm_init_smc91x);
static int hsusb_phy_init_seq[] = {
0x08, 0x31, /* Increase HS Driver Amplitude */
0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */
-1
};
static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
{
int ret;
if (assert) {
ret = clk_reset(link_clk, CLK_RESET_ASSERT);
if (ret)
pr_err("usb hs_clk assert failed\n");
} else {
ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb hs_clk deassert failed\n");
}
return ret;
}
static int hsusb_phy_clk_reset(struct clk *phy_clk)
{
int ret;
ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
if (ret) {
pr_err("usb phy clk assert failed\n");
return ret;
}
usleep_range(10000, 12000);
ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
if (ret)
pr_err("usb phy clk deassert failed\n");
return ret;
}
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_DR_MODE_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
.link_clk_reset = hsusb_link_clk_reset,
.phy_clk_reset = hsusb_phy_clk_reset,
};
static struct platform_device *devices[] __initdata = {
&msm_clock_8x50,
&msm_device_gpio_8x50,
&msm_device_uart3,
&msm_device_smd,
&msm_device_otg,
&msm_device_hsusb,
&msm_device_hsusb_host,
};
static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
{51, "sdc1_dat_3"},
{52, "sdc1_dat_2"},
{53, "sdc1_dat_1"},
{54, "sdc1_dat_0"},
{55, "sdc1_cmd"},
{56, "sdc1_clk"}
};
static struct vreg *vreg_mmc;
static unsigned long vreg_sts;
static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
{
int rc = 0;
struct platform_device *pdev;
pdev = container_of(dv, struct platform_device, dev);
if (vdd == 0) {
if (!vreg_sts)
return 0;
clear_bit(pdev->id, &vreg_sts);
if (!vreg_sts) {
rc = vreg_disable(vreg_mmc);
if (rc)
pr_err("vreg_mmc disable failed for slot "
"%d: %d\n", pdev->id, rc);
}
return 0;
}
if (!vreg_sts) {
rc = vreg_set_level(vreg_mmc, 2900);
if (rc)
pr_err("vreg_mmc set level failed for slot %d: %d\n",
pdev->id, rc);
rc = vreg_enable(vreg_mmc);
if (rc)
pr_err("vreg_mmc enable failed for slot %d: %d\n",
pdev->id, rc);
}
set_bit(pdev->id, &vreg_sts);
return 0;
}
static struct msm_mmc_gpio_data sdc1_gpio = {
.gpio = sdc1_gpio_cfg,
.size = ARRAY_SIZE(sdc1_gpio_cfg),
};
static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
.translate_vdd = msm_sdcc_setup_power,
.gpio_data = &sdc1_gpio,
};
static void __init qsd8x50_init_mmc(void)
{
vreg_mmc = vreg_get(NULL, "gp5");
if (IS_ERR(vreg_mmc)) {
pr_err("vreg get for vreg_mmc failed (%ld)\n",
PTR_ERR(vreg_mmc));
return;
}
msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
}
static void __init qsd8x50_map_io(void)
{
msm_map_qsd8x50_io();
}
static void __init qsd8x50_init_irq(void)
{
msm_init_irq();
msm_init_sirc();
}
static void __init qsd8x50_init(void)
{
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
platform_add_devices(devices, ARRAY_SIZE(devices));
qsd8x50_init_mmc();
}
static void __init qsd8x50_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
.init_time = qsd8x50_timer_init,
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
.atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
.init_time = qsd8x50_timer_init,
MACHINE_END

114
arch/arm/mach-msm/board-sapphire.c
View File

@ -1,114 +0,0 @@
/* linux/arch/arm/mach-msm/board-sapphire.c
* Copyright (C) 2007-2009 HTC Corporation.
* Author: Thomas Tsai <thomas_tsai@htc.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/vreg.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/setup.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/memblock.h>
#include "gpio_chip.h"
#include "board-sapphire.h"
#include "proc_comm.h"
#include "devices.h"
#include "common.h"
void msm_init_irq(void);
void msm_init_gpio(void);
static struct platform_device *devices[] __initdata = {
&msm_device_smd,
&msm_device_dmov,
&msm_device_nand,
&msm_device_uart1,
&msm_device_uart3,
};
void msm_timer_init(void);
static void __init sapphire_init_irq(void)
{
msm_init_irq();
}
static void __init sapphire_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc sapphire_io_desc[] __initdata = {
{
.virtual = SAPPHIRE_CPLD_BASE,
.pfn = __phys_to_pfn(SAPPHIRE_CPLD_START),
.length = SAPPHIRE_CPLD_SIZE,
.type = MT_DEVICE_NONSHARED
}
};
static void __init sapphire_fixup(struct tag *tags, char **cmdline)
{
int smi_sz = parse_tag_smi((const struct tag *)tags);
if (smi_sz == 32) {
memblock_add(PHYS_OFFSET, 84*SZ_1M);
} else if (smi_sz == 64) {
memblock_add(PHYS_OFFSET, 101*SZ_1M);
} else {
memblock_add(PHYS_OFFSET, 101*SZ_1M);
/* Give a default value when not get smi size */
smi_sz = 64;
}
}
static void __init sapphire_map_io(void)
{
msm_map_common_io();
iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
msm_clock_init();
}
static void __init sapphire_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
.atag_offset = 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
.init_machine = sapphire_init,
.init_late = sapphire_init_late,
.init_time = msm_timer_init,
MACHINE_END

233
arch/arm/mach-msm/board-trout-gpio.c
View File

@ -1,233 +0,0 @@
/*
* linux/arch/arm/mach-msm/gpio.c
*
* Copyright (C) 2005 HP Labs
* Copyright (C) 2008 Google, Inc.
* Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include "board-trout.h"
static uint8_t trout_int_mask[2] = {
[0] = 0xff, /* mask all interrupts */
[1] = 0xff,
};
static uint8_t trout_sleep_int_mask[] = {
[0] = 0xff,
[1] = 0xff,
};
struct msm_gpio_chip {
struct gpio_chip chip;
void __iomem *reg; /* Base of register bank */
u8 shadow;
};
#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
{
struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
unsigned mask = 1 << offset;
return !!(readb(msm_gpio->reg) & mask);
}
static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
unsigned mask = 1 << offset;
if (val)
msm_gpio->shadow |= mask;
else
msm_gpio->shadow &= ~mask;
writeb(msm_gpio->shadow, msm_gpio->reg);
}
static int msm_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset)
{
msm_gpiolib_set(chip, offset, 0);
return 0;
}
static int msm_gpiolib_direction_output(struct gpio_chip *chip,
unsigned offset, int val)
{
msm_gpiolib_set(chip, offset, val);
return 0;
}
static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
return TROUT_GPIO_TO_INT(offset + chip->base);
}
#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \
{ \
.chip = { \
.label = name, \
.direction_input = msm_gpiolib_direction_input,\
.direction_output = msm_gpiolib_direction_output, \
.get = msm_gpiolib_get, \
.set = msm_gpiolib_set, \
.to_irq = trout_gpio_to_irq, \
.base = base_gpio, \
.ngpio = 8, \
}, \
.reg = reg_num + TROUT_CPLD_BASE, \
.shadow = shadow_val, \
}
static struct msm_gpio_chip msm_gpio_banks[] = {
#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000)
/* H2W pins <-> UART1 */
TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40),
#else
/* H2W pins <-> UART3, Bluetooth <-> UART1 */
TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80),
#endif
/* I2C pull */
TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04),
TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0),
/* mmdi 32k en */
TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04),
TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0),
TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0),
TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
};
static void trout_gpio_irq_ack(struct irq_data *d)
{
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
int reg = TROUT_BANK_TO_STAT_REG(bank);
/*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/
writeb(mask, TROUT_CPLD_BASE + reg);
}
static void trout_gpio_irq_mask(struct irq_data *d)
{
unsigned long flags;
uint8_t reg_val;
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
int reg = TROUT_BANK_TO_MASK_REG(bank);
local_irq_save(flags);
reg_val = trout_int_mask[bank] |= mask;
/*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
d->irq, bank, reg_val);*/
writeb(reg_val, TROUT_CPLD_BASE + reg);
local_irq_restore(flags);
}
static void trout_gpio_irq_unmask(struct irq_data *d)
{
unsigned long flags;
uint8_t reg_val;
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
int reg = TROUT_BANK_TO_MASK_REG(bank);
local_irq_save(flags);
reg_val = trout_int_mask[bank] &= ~mask;
/*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
d->irq, bank, reg_val);*/
writeb(reg_val, TROUT_CPLD_BASE + reg);
local_irq_restore(flags);
}
int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned long flags;
int bank = TROUT_INT_TO_BANK(d->irq);
uint8_t mask = TROUT_INT_TO_MASK(d->irq);
local_irq_save(flags);
if(on)
trout_sleep_int_mask[bank] &= ~mask;
else
trout_sleep_int_mask[bank] |= mask;
local_irq_restore(flags);
return 0;
}
static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int j, m;
unsigned v;
int bank;
int stat_reg;
int int_base = TROUT_INT_START;
uint8_t int_mask;
for (bank = 0; bank < 2; bank++) {
stat_reg = TROUT_BANK_TO_STAT_REG(bank);
v = readb(TROUT_CPLD_BASE + stat_reg);
int_mask = trout_int_mask[bank];
if (v & int_mask) {
writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
printk(KERN_ERR "trout_gpio_irq_handler: got masked "
"interrupt: %d:%02x\n", bank, v & int_mask);
}
v &= ~int_mask;
while (v) {
m = v & -v;
j = fls(m) - 1;
/*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
"it %d irq %d\n", bank, v, m, j, int_base + j);*/
v &= ~m;
generic_handle_irq(int_base + j);
}
int_base += TROUT_INT_BANK0_COUNT;
}
desc->irq_data.chip->irq_ack(&desc->irq_data);
}
static struct irq_chip trout_gpio_irq_chip = {
.name = "troutgpio",
.irq_ack = trout_gpio_irq_ack,
.irq_mask = trout_gpio_irq_mask,
.irq_unmask = trout_gpio_irq_unmask,
.irq_set_wake = trout_gpio_irq_set_wake,
};
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
int __init trout_init_gpio(void)
{
int i;
for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
irq_set_chip_and_handler(i, &trout_gpio_irq_chip,
handle_edge_irq);
set_irq_flags(i, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
gpiochip_add(&msm_gpio_banks[i].chip);
irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1);
return 0;
}
postcore_initcall(trout_init_gpio);

185
arch/arm/mach-msm/board-trout-mmc.c
View File

@ -1,185 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout-mmc.c
** Author: Brian Swetland <swetland@google.com>
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <asm/io.h>
#include <mach/vreg.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
#include "board-trout.h"
#include "proc_comm.h"
#define DEBUG_SDSLOT_VDD 1
/* ---- COMMON ---- */
static void config_gpio_table(uint32_t *table, int len)
{
int n;
unsigned id;
for(n = 0; n < len; n++) {
id = table[n];
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
}
}
/* ---- SDCARD ---- */
static uint32_t sdcard_on_gpio_table[] = {
PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
};
static uint32_t sdcard_off_gpio_table[] = {
PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
};
static uint opt_disable_sdcard;
static int __init trout_disablesdcard_setup(char *str)
{
int cal = simple_strtol(str, NULL, 0);
opt_disable_sdcard = cal;
return 1;
}
__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
static struct vreg *vreg_sdslot; /* SD slot power */
struct mmc_vdd_xlat {
int mask;
int level;
};
static struct mmc_vdd_xlat mmc_vdd_table[] = {
{ MMC_VDD_165_195, 1800 },
{ MMC_VDD_20_21, 2050 },
{ MMC_VDD_21_22, 2150 },
{ MMC_VDD_22_23, 2250 },
{ MMC_VDD_23_24, 2350 },
{ MMC_VDD_24_25, 2450 },
{ MMC_VDD_25_26, 2550 },
{ MMC_VDD_26_27, 2650 },
{ MMC_VDD_27_28, 2750 },
{ MMC_VDD_28_29, 2850 },
{ MMC_VDD_29_30, 2950 },
};
static unsigned int sdslot_vdd = 0xffffffff;
static unsigned int sdslot_vreg_enabled;
static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
{
int i, rc;
BUG_ON(!vreg_sdslot);
if (vdd == sdslot_vdd)
return 0;
sdslot_vdd = vdd;
if (vdd == 0) {
#if DEBUG_SDSLOT_VDD
printk("%s: Disabling SD slot power\n", __func__);
#endif
config_gpio_table(sdcard_off_gpio_table,
ARRAY_SIZE(sdcard_off_gpio_table));
vreg_disable(vreg_sdslot);
sdslot_vreg_enabled = 0;
return 0;
}
if (!sdslot_vreg_enabled) {
rc = vreg_enable(vreg_sdslot);
if (rc) {
printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
__func__, rc);
}
config_gpio_table(sdcard_on_gpio_table,
ARRAY_SIZE(sdcard_on_gpio_table));
sdslot_vreg_enabled = 1;
}
for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
if (mmc_vdd_table[i].mask == (1 << vdd)) {
#if DEBUG_SDSLOT_VDD
printk("%s: Setting level to %u\n",
__func__, mmc_vdd_table[i].level);
#endif
rc = vreg_set_level(vreg_sdslot,
mmc_vdd_table[i].level);
if (rc) {
printk(KERN_ERR
"%s: Error setting vreg level (%d)\n",
__func__, rc);
}
return 0;
}
}
printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
return 0;
}
static unsigned int trout_sdslot_status(struct device *dev)
{
unsigned int status;
status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
return (!status);
}
#define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
| MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
| MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
| MMC_VDD_28_29 | MMC_VDD_29_30
static struct msm_mmc_platform_data trout_sdslot_data = {
.ocr_mask = TROUT_MMC_VDD,
.status = trout_sdslot_status,
.translate_vdd = trout_sdslot_switchvdd,
};
int __init trout_init_mmc(unsigned int sys_rev)
{
sdslot_vreg_enabled = 0;
vreg_sdslot = vreg_get(0, "gp6");
if (IS_ERR(vreg_sdslot))
return PTR_ERR(vreg_sdslot);
irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
if (!opt_disable_sdcard)
msm_add_sdcc(2, &trout_sdslot_data,
TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
else
printk(KERN_INFO "trout: SD-Card interface disabled\n");
return 0;
}

292
arch/arm/mach-msm/board-trout-panel.c
View File

@ -1,292 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/system_info.h>
#include <linux/platform_data/video-msm_fb.h>
#include <mach/vreg.h>
#include "board-trout.h"
#include "proc_comm.h"
#include "clock-pcom.h"
#include "devices.h"
#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
#define MDDI_CLIENT_CORE_BASE 0x108000
#define LCD_CONTROL_BLOCK_BASE 0x110000
#define SPI_BLOCK_BASE 0x120000
#define I2C_BLOCK_BASE 0x130000
#define PWM_BLOCK_BASE 0x140000
#define GPIO_BLOCK_BASE 0x150000
#define SYSTEM_BLOCK1_BASE 0x160000
#define SYSTEM_BLOCK2_BASE 0x170000
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C)
#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
#define V_VDDE2E_VDD2_GPIO 0
#define MDDI_RST_N 82
#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
#define START (LCD_CONTROL_BLOCK_BASE|0x08)
#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
#define SSICTL (SPI_BLOCK_BASE|0x00)
#define SSITIME (SPI_BLOCK_BASE|0x04)
#define SSITX (SPI_BLOCK_BASE|0x08)
#define SSIRX (SPI_BLOCK_BASE|0x0C)
#define SSIINTC (SPI_BLOCK_BASE|0x10)
#define SSIINTS (SPI_BLOCK_BASE|0x14)
#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
#define SSIID (SPI_BLOCK_BASE|0x20)
#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
#define GPIODATA (GPIO_BLOCK_BASE|0x00)
#define GPIODIR (GPIO_BLOCK_BASE|0x04)
#define GPIOIS (GPIO_BLOCK_BASE|0x08)
#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
#define GPIOIE (GPIO_BLOCK_BASE|0x14)
#define GPIORIS (GPIO_BLOCK_BASE|0x18)
#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
#define GPIOIC (GPIO_BLOCK_BASE|0x20)
#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
#define GPIOPC (GPIO_BLOCK_BASE|0x28)
#define GPIOID (GPIO_BLOCK_BASE|0x30)
#define SPI_WRITE(reg, val) \
{ SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
{ 0, 5 },
#define SPI_WRITE1(reg) \
{ SSITX, (reg) & 0xff }, \
{ 0, 5 },
struct mddi_table {
uint32_t reg;
uint32_t value;
};
static struct mddi_table mddi_toshiba_init_table[] = {
{ DPSET0, 0x09e90046 },
{ DPSET1, 0x00000118 },
{ DPSUS, 0x00000000 },
{ DPRUN, 0x00000001 },
{ 1, 14 }, /* msleep 14 */
{ SYSCKENA, 0x00000001 },
{ CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */
{ GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
{ GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */
{ GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */
{ GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */
{ WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */
{ GPIOIBE, 0x000003FF },
{ GPIOIS, 0x00000000 },
{ GPIOIC, 0x000003FF },
{ GPIOIE, 0x00000000 },
{ GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
{ 1, 1 }, /* msleep 1 */
{ GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
{ DRAMPWR, 0x00000001 }, /* eDRAM power */
};
#define GPIOSEL_VWAKEINT (1U << 0)
#define INTMASK_VWAKEOUT (1U << 0)
static int trout_new_backlight = 1;
static struct vreg *vreg_mddi_1v5;
static struct vreg *vreg_lcm_2v85;
static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
struct mddi_table *table, size_t count)
{
int i;
for (i = 0; i < count; i++) {
uint32_t reg = table[i].reg;
uint32_t value = table[i].value;
if (reg == 0)
udelay(value);
else if (reg == 1)
msleep(value);
else
client_data->remote_write(client_data, value, reg);
}
}
static int trout_mddi_toshiba_client_init(
struct msm_mddi_bridge_platform_data *bridge_data,
struct msm_mddi_client_data *client_data)
{
int panel_id;
client_data->auto_hibernate(client_data, 0);
trout_process_mddi_table(client_data, mddi_toshiba_init_table,
ARRAY_SIZE(mddi_toshiba_init_table));
client_data->auto_hibernate(client_data, 1);
panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
if (panel_id > 1) {
printk(KERN_WARNING "unknown panel id at mddi_enable\n");
return -1;
}
return 0;
}
static int trout_mddi_toshiba_client_uninit(
struct msm_mddi_bridge_platform_data *bridge_data,
struct msm_mddi_client_data *client_data)
{
return 0;
}
static struct resource resources_msm_fb[] = {
{
.start = MSM_FB_BASE,
.end = MSM_FB_BASE + MSM_FB_SIZE,
.flags = IORESOURCE_MEM,
},
};
struct msm_mddi_bridge_platform_data toshiba_client_data = {
.init = trout_mddi_toshiba_client_init,
.uninit = trout_mddi_toshiba_client_uninit,
.fb_data = {
.xres = 320,
.yres = 480,
.width = 45,
.height = 67,
.output_format = 0,
},
};
static struct msm_mddi_platform_data mddi_pdata = {
.clk_rate = 122880000,
.fb_resource = resources_msm_fb,
.num_clients = 1,
.client_platform_data = {
{
.product_id = (0xd263 << 16 | 0),
.name = "mddi_c_d263_0000",
.id = 0,
.client_data = &toshiba_client_data,
.clk_rate = 0,
},
},
};
int __init trout_init_panel(void)
{
int rc;
if (!machine_is_trout())
return 0;
vreg_mddi_1v5 = vreg_get(0, "gp2");
if (IS_ERR(vreg_mddi_1v5))
return PTR_ERR(vreg_mddi_1v5);
vreg_lcm_2v85 = vreg_get(0, "gp4");
if (IS_ERR(vreg_lcm_2v85))
return PTR_ERR(vreg_lcm_2v85);
trout_new_backlight = system_rev >= 5;
if (trout_new_backlight) {
uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
GPIO_NO_PULL, GPIO_8MA);
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
} else {
uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
GPIO_NO_PULL, GPIO_8MA);
uint32_t id = P_GP_CLK;
uint32_t rate = 19200000;
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
if (id < 0)
pr_err("trout_init_panel: set clock rate failed\n");
}
rc = platform_device_register(&msm_device_mdp);
if (rc)
return rc;
msm_device_mddi0.dev.platform_data = &mddi_pdata;
return platform_device_register(&msm_device_mddi0);
}
device_initcall(trout_init_panel);

111
arch/arm/mach-msm/board-trout.c
View File

@ -1,111 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout.c
*
* Copyright (C) 2009 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/system_info.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
#include "devices.h"
#include "board-trout.h"
#include "common.h"
extern int trout_init_mmc(unsigned int);
static struct platform_device *devices[] __initdata = {
&msm_clock_7x01a,
&msm_device_gpio_7201,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
&msm_device_hsusb,
&msm_device_i2c,
};
static void __init trout_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
}
static void __init trout_init_irq(void)
{
msm_init_irq();
}
static void __init trout_fixup(struct tag *tags, char **cmdline)
{
memblock_add(PHYS_OFFSET, 101*SZ_1M);
}
static void __init trout_init(void)
{
int rc;
platform_add_devices(devices, ARRAY_SIZE(devices));
if (IS_ENABLED(CONFIG_MMC)) {
rc = trout_init_mmc(system_rev);
if (rc)
pr_crit("MMC init failure (%d)\n", rc);
}
}
static struct map_desc trout_io_desc[] __initdata = {
{
.virtual = (unsigned long)TROUT_CPLD_BASE,
.pfn = __phys_to_pfn(TROUT_CPLD_START),
.length = TROUT_CPLD_SIZE,
.type = MT_DEVICE_NONSHARED
}
};
static void __init trout_map_io(void)
{
msm_map_common_io();
iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000)
/* route UART3 to the "H2W" extended usb connector */
writeb(0x80, TROUT_CPLD_BASE + 0x00);
#endif
}
static void __init trout_init_late(void)
{
smd_debugfs_init();
}
MACHINE_START(TROUT, "HTC Dream")
.atag_offset = 0x100,
.fixup = trout_fixup,
.map_io = trout_map_io,
.init_early = trout_init_early,
.init_irq = trout_init_irq,
.init_machine = trout_init,
.init_late = trout_init_late,
.init_time = msm7x01_timer_init,
MACHINE_END

162
arch/arm/mach-msm/board-trout.h
View File

@ -1,162 +0,0 @@
/* linux/arch/arm/mach-msm/board-trout.h
** Author: Brian Swetland <swetland@google.com>
*/
#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
#include "common.h"
#define MSM_SMI_BASE 0x00000000
#define MSM_SMI_SIZE 0x00800000
#define MSM_EBI_BASE 0x10000000
#define MSM_EBI_SIZE 0x06e00000
#define MSM_PMEM_GPU0_BASE 0x00000000
#define MSM_PMEM_GPU0_SIZE 0x00700000
#define MSM_PMEM_MDP_BASE 0x02000000
#define MSM_PMEM_MDP_SIZE 0x00800000
#define MSM_PMEM_ADSP_BASE 0x02800000
#define MSM_PMEM_ADSP_SIZE 0x00800000
#define MSM_PMEM_CAMERA_BASE 0x03000000
#define MSM_PMEM_CAMERA_SIZE 0x00800000
#define MSM_FB_BASE 0x03800000
#define MSM_FB_SIZE 0x00100000
#define MSM_LINUX_BASE MSM_EBI_BASE
#define MSM_LINUX_SIZE 0x06500000
#define MSM_PMEM_GPU1_SIZE 0x800000
#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000)
#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K)
#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
#error invalid memory map
#endif
#define DECLARE_MSM_IOMAP
#include <mach/msm_iomap.h>
#define TROUT_4_BALL_UP_0 1
#define TROUT_4_BALL_LEFT_0 18
#define TROUT_4_BALL_DOWN_0 57
#define TROUT_4_BALL_RIGHT_0 91
#define TROUT_5_BALL_UP_0 94
#define TROUT_5_BALL_LEFT_0 18
#define TROUT_5_BALL_DOWN_0 90
#define TROUT_5_BALL_RIGHT_0 19
#define TROUT_POWER_KEY 20
#define TROUT_4_TP_LS_EN 19
#define TROUT_5_TP_LS_EN 1
#define TROUT_CPLD_BASE IOMEM(0xE8100000)
#define TROUT_CPLD_START 0x98000000
#define TROUT_CPLD_SIZE SZ_4K
#define TROUT_GPIO_CABLE_IN1 (83)
#define TROUT_GPIO_CABLE_IN2 (49)
#define TROUT_GPIO_START (128)
#define TROUT_GPIO_INT_MASK0_REG (0x0c)
#define TROUT_GPIO_INT_STAT0_REG (0x0e)
#define TROUT_GPIO_INT_MASK1_REG (0x14)
#define TROUT_GPIO_INT_STAT1_REG (0x10)
#define TROUT_GPIO_HAPTIC_PWM (28)
#define TROUT_GPIO_PS_HOLD (25)
#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00)
#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08)
#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10)
#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18)
#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20)
#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28)
#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30)
#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48)
#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0)
#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1)
#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2)
#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3)
#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4)
#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5)
#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6)
#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7)
#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0)
#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1)
#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2)
#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3)
#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4)
#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5)
#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6)
#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7)
#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0)
#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1)
#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2)
#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3)
#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4)
#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5)
#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6)
#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7)
#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0)
#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1)
#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2)
#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3)
#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0)
#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1)
#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2)
#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3)
#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4)
#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5)
#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6)
#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7)
#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N)
#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N)
#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0)
#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1)
#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4)
#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5)
#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6)
#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7)
#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0)
#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N)
#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
#define TROUT_INT_BANK0_COUNT (8)
#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
#define TROUT_INT_BANK1_COUNT (1)
#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
TROUT_INT_BANK1_COUNT - 1)
#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
#define TROUT_BANK_TO_MASK_REG(bank) \
(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
#define TROUT_BANK_TO_STAT_REG(bank) \
(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
#endif /* GUARD */

176
arch/arm/mach-msm/clock-pcom.c
View File

@ -1,176 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <mach/clk.h>
#include "proc_comm.h"
#include "clock.h"
#include "clock-pcom.h"
struct clk_pcom {
unsigned id;
unsigned long flags;
struct msm_clk msm_clk;
};
static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw)
{
return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk);
}
static int pc_clk_enable(struct clk_hw *hw)
{
unsigned id = to_clk_pcom(hw)->id;
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
if (rc < 0)
return rc;
else
return (int)id < 0 ? -EINVAL : 0;
}
static void pc_clk_disable(struct clk_hw *hw)
{
unsigned id = to_clk_pcom(hw)->id;
msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
}
static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action)
{
int rc;
unsigned id = to_clk_pcom(hw)->id;
if (action == CLK_RESET_ASSERT)
rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
else
rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
if (rc < 0)
return rc;
else
return (int)id < 0 ? -EINVAL : 0;
}
static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate,
unsigned long p_rate)
{
struct clk_pcom *p = to_clk_pcom(hw);
unsigned id = p->id, rate = new_rate;
int rc;
/*
* The rate _might_ be rounded off to the nearest KHz value by the
* remote function. So a return value of 0 doesn't necessarily mean
* that the exact rate was set successfully.
*/
if (p->flags & CLKFLAG_MIN)
rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
else
rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
if (rc < 0)
return rc;
else
return (int)id < 0 ? -EINVAL : 0;
}
static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
{
unsigned id = to_clk_pcom(hw)->id;
if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
return 0;
else
return id;
}
static int pc_clk_is_enabled(struct clk_hw *hw)
{
unsigned id = to_clk_pcom(hw)->id;
if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
return 0;
else
return id;
}
static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *p_rate)
{
/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
return rate;
}
static struct clk_ops clk_ops_pcom = {
.enable = pc_clk_enable,
.disable = pc_clk_disable,
.set_rate = pc_clk_set_rate,
.recalc_rate = pc_clk_recalc_rate,
.is_enabled = pc_clk_is_enabled,
.round_rate = pc_clk_round_rate,
};
static int msm_clock_pcom_probe(struct platform_device *pdev)
{
const struct pcom_clk_pdata *pdata = pdev->dev.platform_data;
int i, ret;
for (i = 0; i < pdata->num_lookups; i++) {
const struct clk_pcom_desc *desc = &pdata->lookup[i];
struct clk *c;
struct clk_pcom *p;
struct clk_hw *hw;
struct clk_init_data init;
p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->id = desc->id;
p->flags = desc->flags;
p->msm_clk.reset = pc_clk_reset;
hw = &p->msm_clk.hw;
hw->init = &init;
init.name = desc->name;
init.ops = &clk_ops_pcom;
init.num_parents = 0;
init.flags = CLK_IS_ROOT;
if (!(p->flags & CLKFLAG_AUTO_OFF))
init.flags |= CLK_IGNORE_UNUSED;
c = devm_clk_register(&pdev->dev, hw);
ret = clk_register_clkdev(c, desc->con, desc->dev);
if (ret)
return ret;
}
return 0;
}
static struct platform_driver msm_clock_pcom_driver = {
.probe = msm_clock_pcom_probe,
.driver = {
.name = "msm-clock-pcom",
},
};
module_platform_driver(msm_clock_pcom_driver);
MODULE_LICENSE("GPL v2");

145
arch/arm/mach-msm/clock-pcom.h
View File

@ -1,145 +0,0 @@
/*
* Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
/* clock IDs used by the modem processor */
#define P_ACPU_CLK 0 /* Applications processor clock */
#define P_ADM_CLK 1 /* Applications data mover clock */
#define P_ADSP_CLK 2 /* ADSP clock */
#define P_EBI1_CLK 3 /* External bus interface 1 clock */
#define P_EBI2_CLK 4 /* External bus interface 2 clock */
#define P_ECODEC_CLK 5 /* External CODEC clock */
#define P_EMDH_CLK 6 /* External MDDI host clock */
#define P_GP_CLK 7 /* General purpose clock */
#define P_GRP_3D_CLK 8 /* Graphics clock */
#define P_I2C_CLK 9 /* I2C clock */
#define P_ICODEC_RX_CLK 10 /* Internal CODEX RX clock */
#define P_ICODEC_TX_CLK 11 /* Internal CODEX TX clock */
#define P_IMEM_CLK 12 /* Internal graphics memory clock */
#define P_MDC_CLK 13 /* MDDI client clock */
#define P_MDP_CLK 14 /* Mobile display processor clock */
#define P_PBUS_CLK 15 /* Peripheral bus clock */
#define P_PCM_CLK 16 /* PCM clock */
#define P_PMDH_CLK 17 /* Primary MDDI host clock */
#define P_SDAC_CLK 18 /* Stereo DAC clock */
#define P_SDC1_CLK 19 /* Secure Digital Card clocks */
#define P_SDC1_P_CLK 20
#define P_SDC2_CLK 21
#define P_SDC2_P_CLK 22
#define P_SDC3_CLK 23
#define P_SDC3_P_CLK 24
#define P_SDC4_CLK 25
#define P_SDC4_P_CLK 26
#define P_TSIF_CLK 27 /* Transport Stream Interface clocks */
#define P_TSIF_REF_CLK 28
#define P_TV_DAC_CLK 29 /* TV clocks */
#define P_TV_ENC_CLK 30
#define P_UART1_CLK 31 /* UART clocks */
#define P_UART2_CLK 32
#define P_UART3_CLK 33
#define P_UART1DM_CLK 34
#define P_UART2DM_CLK 35
#define P_USB_HS_CLK 36 /* High speed USB core clock */
#define P_USB_HS_P_CLK 37 /* High speed USB pbus clock */
#define P_USB_OTG_CLK 38 /* Full speed USB clock */
#define P_VDC_CLK 39 /* Video controller clock */
#define P_VFE_MDC_CLK 40 /* Camera / Video Front End clock */
#define P_VFE_CLK 41 /* VFE MDDI client clock */
#define P_MDP_LCDC_PCLK_CLK 42
#define P_MDP_LCDC_PAD_PCLK_CLK 43
#define P_MDP_VSYNC_CLK 44
#define P_SPI_CLK 45
#define P_VFE_AXI_CLK 46
#define P_USB_HS2_CLK 47 /* High speed USB 2 core clock */
#define P_USB_HS2_P_CLK 48 /* High speed USB 2 pbus clock */
#define P_USB_HS3_CLK 49 /* High speed USB 3 core clock */
#define P_USB_HS3_P_CLK 50 /* High speed USB 3 pbus clock */
#define P_GRP_3D_P_CLK 51 /* Graphics pbus clock */
#define P_USB_PHY_CLK 52 /* USB PHY clock */
#define P_USB_HS_CORE_CLK 53 /* High speed USB 1 core clock */
#define P_USB_HS2_CORE_CLK 54 /* High speed USB 2 core clock */
#define P_USB_HS3_CORE_CLK 55 /* High speed USB 3 core clock */
#define P_CAM_M_CLK 56
#define P_CAMIF_PAD_P_CLK 57
#define P_GRP_2D_CLK 58
#define P_GRP_2D_P_CLK 59
#define P_I2S_CLK 60
#define P_JPEG_CLK 61
#define P_JPEG_P_CLK 62
#define P_LPA_CODEC_CLK 63
#define P_LPA_CORE_CLK 64
#define P_LPA_P_CLK 65
#define P_MDC_IO_CLK 66
#define P_MDC_P_CLK 67
#define P_MFC_CLK 68
#define P_MFC_DIV2_CLK 69
#define P_MFC_P_CLK 70
#define P_QUP_I2C_CLK 71
#define P_ROTATOR_IMEM_CLK 72
#define P_ROTATOR_P_CLK 73
#define P_VFE_CAMIF_CLK 74
#define P_VFE_P_CLK 75
#define P_VPE_CLK 76
#define P_I2C_2_CLK 77
#define P_MI2S_CODEC_RX_S_CLK 78
#define P_MI2S_CODEC_RX_M_CLK 79
#define P_MI2S_CODEC_TX_S_CLK 80
#define P_MI2S_CODEC_TX_M_CLK 81
#define P_PMDH_P_CLK 82
#define P_EMDH_P_CLK 83
#define P_SPI_P_CLK 84
#define P_TSIF_P_CLK 85
#define P_MDP_P_CLK 86
#define P_SDAC_M_CLK 87
#define P_MI2S_S_CLK 88
#define P_MI2S_M_CLK 89
#define P_AXI_ROTATOR_CLK 90
#define P_HDMI_CLK 91
#define P_CSI0_CLK 92
#define P_CSI0_VFE_CLK 93
#define P_CSI0_P_CLK 94
#define P_CSI1_CLK 95
#define P_CSI1_VFE_CLK 96
#define P_CSI1_P_CLK 97
#define P_GSBI_CLK 98
#define P_GSBI_P_CLK 99
#define P_CE_CLK 100 /* Crypto engine */
#define P_CODEC_SSBI_CLK 101
#define P_NR_CLKS 102
struct clk_pcom_desc {
unsigned id;
const char *name;
const char *con;
const char *dev;
unsigned long flags;
};
struct pcom_clk_pdata {
struct clk_pcom_desc *lookup;
u32 num_lookups;
};
#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \
.id = P_##clk_id, \
.name = #clk_id, \
.con = clk_name, \
.dev = clk_dev, \
.flags = clk_flags, \
}
#endif

28
arch/arm/mach-msm/clock.c
View File

@ -1,28 +0,0 @@
/* arch/arm/mach-msm/clock.c
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include "clock.h"
int clk_reset(struct clk *clk, enum clk_reset_action action)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct msm_clk *m = to_msm_clk(hw);
return m->reset(hw, action);
}
EXPORT_SYMBOL(clk_reset);

43
arch/arm/mach-msm/clock.h
View File

@ -1,43 +0,0 @@
/* arch/arm/mach-msm/clock.h
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
#define __ARCH_ARM_MACH_MSM_CLOCK_H
#include <linux/clk-provider.h>
#include <mach/clk.h>
#define CLK_FIRST_AVAILABLE_FLAG 0x00000100
#define CLKFLAG_AUTO_OFF 0x00000200
#define CLKFLAG_MIN 0x00000400
#define CLKFLAG_MAX 0x00000800
#define OFF CLKFLAG_AUTO_OFF
#define CLK_MIN CLKFLAG_MIN
#define CLK_MAX CLKFLAG_MAX
#define CLK_MINMAX (CLK_MIN | CLK_MAX)
struct msm_clk {
int (*reset)(struct clk_hw *hw, enum clk_reset_action action);
struct clk_hw hw;
};
static inline struct msm_clk *to_msm_clk(struct clk_hw *hw)
{
return container_of(hw, struct msm_clk, hw);
}
#endif

41
arch/arm/mach-msm/common.h
View File

@ -1,41 +0,0 @@
/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_COMMON_H
#define __MACH_COMMON_H
extern void msm7x01_timer_init(void);
extern void msm7x30_timer_init(void);
extern void qsd8x50_timer_init(void);
extern void msm_map_common_io(void);
extern void msm_map_msm7x30_io(void);
extern void msm_map_qsd8x50_io(void);
extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller);
struct msm_mmc_platform_data;
extern void msm_add_devices(void);
extern void msm_init_irq(void);
extern void msm_init_gpio(void);
extern int msm_add_sdcc(unsigned int controller,
struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags);
#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
extern int smd_debugfs_init(void);
#else
static inline int smd_debugfs_init(void) { return 0; }
#endif
#endif

480
arch/arm/mach-msm/devices-msm7x00.c
View File

@ -1,480 +0,0 @@
/* linux/arch/arm/mach-msm/devices.c
*
* Copyright (C) 2008 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <mach/irqs.h>
#include <mach/msm_iomap.h>
#include "devices.h"
#include <asm/mach/flash.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include "clock.h"
#include "clock-pcom.h"
#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource msm_gpio_resources[] = {
{
.start = 32 + 0,
.end = 32 + 0,
.flags = IORESOURCE_IRQ,
},
{
.start = 32 + 1,
.end = 32 + 1,
.flags = IORESOURCE_IRQ,
},
{
.start = 0xa9200800,
.end = 0xa9200800 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "gpio1"
},
{
.start = 0xa9300C00,
.end = 0xa9300C00 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "gpio2"
},
};
struct platform_device msm_device_gpio_7201 = {
.name = "gpio-msm-7201",
.num_resources = ARRAY_SIZE(msm_gpio_resources),
.resource = msm_gpio_resources,
};
static struct resource resources_uart1[] = {
{
.start = INT_UART1,
.end = INT_UART1,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART1_PHYS,
.end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
.flags = IORESOURCE_MEM,
.name = "uart_resource"
},
};
static struct resource resources_uart2[] = {
{
.start = INT_UART2,
.end = INT_UART2,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART2_PHYS,
.end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
.flags = IORESOURCE_MEM,
.name = "uart_resource"
},
};
static struct resource resources_uart3[] = {
{
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART3_PHYS,
.end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
.flags = IORESOURCE_MEM,
.name = "uart_resource"
},
};
struct platform_device msm_device_uart1 = {
.name = "msm_serial",
.id = 0,
.num_resources = ARRAY_SIZE(resources_uart1),
.resource = resources_uart1,
};
struct platform_device msm_device_uart2 = {
.name = "msm_serial",
.id = 1,
.num_resources = ARRAY_SIZE(resources_uart2),
.resource = resources_uart2,
};
struct platform_device msm_device_uart3 = {
.name = "msm_serial",
.id = 2,
.num_resources = ARRAY_SIZE(resources_uart3),
.resource = resources_uart3,
};
static struct resource resources_i2c[] = {
{
.start = MSM_I2C_PHYS,
.end = MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_PWB_I2C,
.end = INT_PWB_I2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_i2c = {
.name = "msm_i2c",
.id = 0,
.num_resources = ARRAY_SIZE(resources_i2c),
.resource = resources_i2c,
};
static struct resource resources_hsusb[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_hsusb = {
.name = "msm_hsusb",
.id = -1,
.num_resources = ARRAY_SIZE(resources_hsusb),
.resource = resources_hsusb,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct flash_platform_data msm_nand_data = {
.parts = NULL,
.nr_parts = 0,
};
static struct resource resources_nand[] = {
[0] = {
.start = 7,
.end = 7,
.flags = IORESOURCE_DMA,
},
};
struct platform_device msm_device_nand = {
.name = "msm_nand",
.id = -1,
.num_resources = ARRAY_SIZE(resources_nand),
.resource = resources_nand,
.dev = {
.platform_data = &msm_nand_data,
},
};
struct platform_device msm_device_smd = {
.name = "msm_smd",
.id = -1,
};
static struct resource resources_sdc1[] = {
{
.start = MSM_SDC1_PHYS,
.end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC1_0,
.end = INT_SDC1_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc2[] = {
{
.start = MSM_SDC2_PHYS,
.end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC2_0,
.end = INT_SDC2_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc3[] = {
{
.start = MSM_SDC3_PHYS,
.end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC3_0,
.end = INT_SDC3_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc4[] = {
{
.start = MSM_SDC4_PHYS,
.end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC4_0,
.end = INT_SDC4_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
struct platform_device msm_device_sdc1 = {
.name = "msm_sdcc",
.id = 1,
.num_resources = ARRAY_SIZE(resources_sdc1),
.resource = resources_sdc1,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc2 = {
.name = "msm_sdcc",
.id = 2,
.num_resources = ARRAY_SIZE(resources_sdc2),
.resource = resources_sdc2,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc3 = {
.name = "msm_sdcc",
.id = 3,
.num_resources = ARRAY_SIZE(resources_sdc3),
.resource = resources_sdc3,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc4 = {
.name = "msm_sdcc",
.id = 4,
.num_resources = ARRAY_SIZE(resources_sdc4),
.resource = resources_sdc4,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static struct platform_device *msm_sdcc_devices[] __initdata = {
&msm_device_sdc1,
&msm_device_sdc2,
&msm_device_sdc3,
&msm_device_sdc4,
};
int __init msm_add_sdcc(unsigned int controller,
struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags)
{
struct platform_device *pdev;
struct resource *res;
if (controller < 1 || controller > 4)
return -EINVAL;
pdev = msm_sdcc_devices[controller-1];
pdev->dev.platform_data = plat;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
if (!res)
return -EINVAL;
else if (stat_irq) {
res->start = res->end = stat_irq;
res->flags &= ~IORESOURCE_DISABLED;
res->flags |= stat_irq_flags;
}
return platform_device_register(pdev);
}
static struct resource resources_mddi0[] = {
{
.start = MSM_PMDH_PHYS,
.end = MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_MDDI_PRI,
.end = INT_MDDI_PRI,
.flags = IORESOURCE_IRQ,
},
};
static struct resource resources_mddi1[] = {
{
.start = MSM_EMDH_PHYS,
.end = MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_MDDI_EXT,
.end = INT_MDDI_EXT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_mddi0 = {
.name = "msm_mddi",
.id = 0,
.num_resources = ARRAY_SIZE(resources_mddi0),
.resource = resources_mddi0,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_mddi1 = {
.name = "msm_mddi",
.id = 1,
.num_resources = ARRAY_SIZE(resources_mddi1),
.resource = resources_mddi1,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static struct resource resources_mdp[] = {
{
.start = MSM_MDP_PHYS,
.end = MSM_MDP_PHYS + MSM_MDP_SIZE - 1,
.name = "mdp",
.flags = IORESOURCE_MEM
},
{
.start = INT_MDP,
.end = INT_MDP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_mdp = {
.name = "msm_mdp",
.id = 0,
.num_resources = ARRAY_SIZE(resources_mdp),
.resource = resources_mdp,
};
static struct clk_pcom_desc msm_clocks_7x01a[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0),
CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, 0),
CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0),
CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0),
CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF),
CLK_PCOM("gp_clk", GP_CLK, NULL, 0),
CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, OFF),
CLK_PCOM("i2c_clk", I2C_CLK, "msm_i2c.0", 0),
CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0),
CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0),
CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF),
CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0),
CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF),
CLK_PCOM("pbus_clk", PBUS_CLK, NULL, 0),
CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX),
CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF),
CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF),
CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF),
CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF),
CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF),
CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF),
CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF),
CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF),
CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0),
CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF),
CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0),
CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF),
CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF),
CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0),
CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF),
CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, "msm_hsusb", OFF),
CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0),
CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF ),
CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF),
CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF),
};
static struct pcom_clk_pdata msm_clock_7x01a_pdata = {
.lookup = msm_clocks_7x01a,
.num_lookups = ARRAY_SIZE(msm_clocks_7x01a),
};
struct platform_device msm_clock_7x01a = {
.name = "msm-clock-pcom",
.dev.platform_data = &msm_clock_7x01a_pdata,
};

246
arch/arm/mach-msm/devices-msm7x30.c
View File

@ -1,246 +0,0 @@
/*
* Copyright (C) 2008 Google, Inc.
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/clkdev.h>
#include <mach/irqs.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include "devices.h"
#include "smd_private.h"
#include "common.h"
#include <asm/mach/flash.h>
#include "clock.h"
#include "clock-pcom.h"
#include <linux/platform_data/mmc-msm_sdcc.h>
static struct resource msm_gpio_resources[] = {
{
.start = 32 + 18,
.end = 32 + 18,
.flags = IORESOURCE_IRQ,
},
{
.start = 32 + 19,
.end = 32 + 19,
.flags = IORESOURCE_IRQ,
},
{
.start = 0xac001000,
.end = 0xac001000 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "gpio1"
},
{
.start = 0xac101400,
.end = 0xac101400 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "gpio2"
},
};
struct platform_device msm_device_gpio_7x30 = {
.name = "gpio-msm-7x30",
.num_resources = ARRAY_SIZE(msm_gpio_resources),
.resource = msm_gpio_resources,
};
static struct resource resources_uart2[] = {
{
.start = INT_UART2,
.end = INT_UART2,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART2_PHYS,
.end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
.flags = IORESOURCE_MEM,
.name = "uart_resource"
},
};
struct platform_device msm_device_uart2 = {
.name = "msm_serial",
.id = 1,
.num_resources = ARRAY_SIZE(resources_uart2),
.resource = resources_uart2,
};
struct platform_device msm_device_smd = {
.name = "msm_smd",
.id = -1,
};
static struct resource resources_otg[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_otg = {
.name = "msm_otg",
.id = -1,
.num_resources = ARRAY_SIZE(resources_otg),
.resource = resources_otg,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static struct resource resources_hsusb[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_hsusb = {
.name = "msm_hsusb",
.id = -1,
.num_resources = ARRAY_SIZE(resources_hsusb),
.resource = resources_hsusb,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static u64 dma_mask = 0xffffffffULL;
static struct resource resources_hsusb_host[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_hsusb_host = {
.name = "msm_hsusb_host",
.id = -1,
.num_resources = ARRAY_SIZE(resources_hsusb_host),
.resource = resources_hsusb_host,
.dev = {
.dma_mask = &dma_mask,
.coherent_dma_mask = 0xffffffffULL,
},
};
static struct clk_pcom_desc msm_clocks_7x30[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0),
CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0),
CLK_PCOM("camif_pad_pclk", CAMIF_PAD_P_CLK, NULL, OFF),
CLK_PCOM("ce_clk", CE_CLK, NULL, 0),
CLK_PCOM("codec_ssbi_clk", CODEC_SSBI_CLK, NULL, 0),
CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN),
CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0),
CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX),
CLK_PCOM("emdh_pclk", EMDH_P_CLK, NULL, OFF),
CLK_PCOM("gp_clk", GP_CLK, NULL, 0),
CLK_PCOM("grp_2d_clk", GRP_2D_CLK, NULL, 0),
CLK_PCOM("grp_2d_pclk", GRP_2D_P_CLK, NULL, 0),
CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0),
CLK_PCOM("grp_pclk", GRP_3D_P_CLK, NULL, 0),
CLK_PCOM("hdmi_clk", HDMI_CLK, NULL, 0),
CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF),
CLK_PCOM("jpeg_clk", JPEG_CLK, NULL, OFF),
CLK_PCOM("jpeg_pclk", JPEG_P_CLK, NULL, OFF),
CLK_PCOM("lpa_codec_clk", LPA_CODEC_CLK, NULL, 0),
CLK_PCOM("lpa_core_clk", LPA_CORE_CLK, NULL, 0),
CLK_PCOM("lpa_pclk", LPA_P_CLK, NULL, 0),
CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0),
CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX),
CLK_PCOM("mddi_pclk", PMDH_P_CLK, NULL, 0),
CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF),
CLK_PCOM("mdp_pclk", MDP_P_CLK, NULL, 0),
CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0),
CLK_PCOM("mfc_clk", MFC_CLK, NULL, 0),
CLK_PCOM("mfc_div2_clk", MFC_DIV2_CLK, NULL, 0),
CLK_PCOM("mfc_pclk", MFC_P_CLK, NULL, 0),
CLK_PCOM("mi2s_m_clk", MI2S_M_CLK, NULL, 0),
CLK_PCOM("mi2s_s_clk", MI2S_S_CLK, NULL, 0),
CLK_PCOM("mi2s_codec_rx_m_clk", MI2S_CODEC_RX_M_CLK, NULL, 0),
CLK_PCOM("mi2s_codec_rx_s_clk", MI2S_CODEC_RX_S_CLK, NULL, 0),
CLK_PCOM("mi2s_codec_tx_m_clk", MI2S_CODEC_TX_M_CLK, NULL, 0),
CLK_PCOM("mi2s_codec_tx_s_clk", MI2S_CODEC_TX_S_CLK, NULL, 0),
CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN),
CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
CLK_PCOM("rotator_clk", AXI_ROTATOR_CLK, NULL, 0),
CLK_PCOM("rotator_imem_clk", ROTATOR_IMEM_CLK, NULL, OFF),
CLK_PCOM("rotator_pclk", ROTATOR_P_CLK, NULL, OFF),
CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
CLK_PCOM("spi_clk", SPI_CLK, NULL, 0),
CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0),
CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0),
CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0),
CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF),
CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF),
CLK_PCOM("usb_hs_core_clk", USB_HS_CORE_CLK, NULL, OFF),
CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF),
CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF),
CLK_PCOM("usb_hs2_core_clk", USB_HS2_CORE_CLK, NULL, OFF),
CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF),
CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF),
CLK_PCOM("usb_hs3_core_clk", USB_HS3_CORE_CLK, NULL, OFF),
CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN),
CLK_PCOM("vfe_camif_clk", VFE_CAMIF_CLK, NULL, 0),
CLK_PCOM("vfe_clk", VFE_CLK, NULL, 0),
CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, 0),
CLK_PCOM("vfe_pclk", VFE_P_CLK, NULL, OFF),
CLK_PCOM("vpe_clk", VPE_CLK, NULL, 0),
/* 7x30 v2 hardware only. */
CLK_PCOM("csi_clk", CSI0_CLK, NULL, 0),
CLK_PCOM("csi_pclk", CSI0_P_CLK, NULL, 0),
CLK_PCOM("csi_vfe_clk", CSI0_VFE_CLK, NULL, 0),
};
static struct pcom_clk_pdata msm_clock_7x30_pdata = {
.lookup = msm_clocks_7x30,
.num_lookups = ARRAY_SIZE(msm_clocks_7x30),
};
struct platform_device msm_clock_7x30 = {
.name = "msm-clock-pcom",
.dev.platform_data = &msm_clock_7x30_pdata,
};

388
arch/arm/mach-msm/devices-qsd8x50.c
View File

@ -1,388 +0,0 @@
/*
* Copyright (C) 2008 Google, Inc.
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <mach/irqs.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
#include "devices.h"
#include "common.h"
#include <asm/mach/flash.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "clock.h"
#include "clock-pcom.h"
static struct resource msm_gpio_resources[] = {
{
.start = 64 + 165 + 9,
.end = 64 + 165 + 9,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 165 + 10,
.end = 64 + 165 + 10,
.flags = IORESOURCE_IRQ,
},
{
.start = 0xa9000800,
.end = 0xa9000800 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "gpio1"
},
{
.start = 0xa9100C00,
.end = 0xa9100C00 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "gpio2"
},
};
struct platform_device msm_device_gpio_8x50 = {
.name = "gpio-msm-8x50",
.num_resources = ARRAY_SIZE(msm_gpio_resources),
.resource = msm_gpio_resources,
};
static struct resource resources_uart3[] = {
{
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART3_PHYS,
.end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
.flags = IORESOURCE_MEM,
.name = "uart_resource"
},
};
struct platform_device msm_device_uart3 = {
.name = "msm_serial",
.id = 2,
.num_resources = ARRAY_SIZE(resources_uart3),
.resource = resources_uart3,
};
struct platform_device msm_device_smd = {
.name = "msm_smd",
.id = -1,
};
static struct resource resources_otg[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_otg = {
.name = "msm_otg",
.id = -1,
.num_resources = ARRAY_SIZE(resources_otg),
.resource = resources_otg,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static struct resource resources_hsusb[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_hsusb = {
.name = "msm_hsusb",
.id = -1,
.num_resources = ARRAY_SIZE(resources_hsusb),
.resource = resources_hsusb,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static u64 dma_mask = 0xffffffffULL;
static struct resource resources_hsusb_host[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_hsusb_host = {
.name = "msm_hsusb_host",
.id = -1,
.num_resources = ARRAY_SIZE(resources_hsusb_host),
.resource = resources_hsusb_host,
.dev = {
.dma_mask = &dma_mask,
.coherent_dma_mask = 0xffffffffULL,
},
};
static struct resource resources_sdc1[] = {
{
.start = MSM_SDC1_PHYS,
.end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC1_0,
.end = INT_SDC1_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc2[] = {
{
.start = MSM_SDC2_PHYS,
.end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC2_0,
.end = INT_SDC2_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc3[] = {
{
.start = MSM_SDC3_PHYS,
.end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC3_0,
.end = INT_SDC3_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc4[] = {
{
.start = MSM_SDC4_PHYS,
.end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC4_0,
.end = INT_SDC4_0,
.flags = IORESOURCE_IRQ,
.name = "cmd_irq",
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
.name = "status_irq"
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
struct platform_device msm_device_sdc1 = {
.name = "msm_sdcc",
.id = 1,
.num_resources = ARRAY_SIZE(resources_sdc1),
.resource = resources_sdc1,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc2 = {
.name = "msm_sdcc",
.id = 2,
.num_resources = ARRAY_SIZE(resources_sdc2),
.resource = resources_sdc2,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc3 = {
.name = "msm_sdcc",
.id = 3,
.num_resources = ARRAY_SIZE(resources_sdc3),
.resource = resources_sdc3,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc4 = {
.name = "msm_sdcc",
.id = 4,
.num_resources = ARRAY_SIZE(resources_sdc4),
.resource = resources_sdc4,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static struct platform_device *msm_sdcc_devices[] __initdata = {
&msm_device_sdc1,
&msm_device_sdc2,
&msm_device_sdc3,
&msm_device_sdc4,
};
int __init msm_add_sdcc(unsigned int controller,
struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags)
{
struct platform_device *pdev;
struct resource *res;
if (controller < 1 || controller > 4)
return -EINVAL;
pdev = msm_sdcc_devices[controller-1];
pdev->dev.platform_data = plat;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
if (!res)
return -EINVAL;
else if (stat_irq) {
res->start = res->end = stat_irq;
res->flags &= ~IORESOURCE_DISABLED;
res->flags |= stat_irq_flags;
}
return platform_device_register(pdev);
}
static struct clk_pcom_desc msm_clocks_8x50[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("ce_clk", CE_CLK, NULL, 0),
CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN),
CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0),
CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0),
CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX),
CLK_PCOM("gp_clk", GP_CLK, NULL, 0),
CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0),
CLK_PCOM("i2c_clk", I2C_CLK, NULL, 0),
CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0),
CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0),
CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF),
CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0),
CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX),
CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF),
CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0),
CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN),
CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF),
CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF),
CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF),
CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF),
CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF),
CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF),
CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF),
CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF),
CLK_PCOM("spi_clk", SPI_CLK, NULL, 0),
CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0),
CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
CLK_PCOM("core", UART1_CLK, NULL, OFF),
CLK_PCOM("core", UART2_CLK, NULL, 0),
CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF),
CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF),
CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0),
CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF),
CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF),
CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0),
CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN),
CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF),
CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF),
CLK_PCOM("vfe_axi_clk", VFE_AXI_CLK, NULL, OFF),
CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF),
CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF),
CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF),
CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF),
CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0),
};
static struct pcom_clk_pdata msm_clock_8x50_pdata = {
.lookup = msm_clocks_8x50,
.num_lookups = ARRAY_SIZE(msm_clocks_8x50),
};
struct platform_device msm_clock_8x50 = {
.name = "msm-clock-pcom",
.dev.platform_data = &msm_clock_8x50_pdata,
};

53
arch/arm/mach-msm/devices.h
View File

@ -1,53 +0,0 @@
/* linux/arch/arm/mach-msm/devices.h
*
* Copyright (C) 2008 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
#define __ARCH_ARM_MACH_MSM_DEVICES_H
extern struct platform_device msm_device_gpio_7201;
extern struct platform_device msm_device_gpio_7x30;
extern struct platform_device msm_device_gpio_8x50;
extern struct platform_device msm_device_uart1;
extern struct platform_device msm_device_uart2;
extern struct platform_device msm_device_uart3;
extern struct platform_device msm8960_device_uart_gsbi2;
extern struct platform_device msm8960_device_uart_gsbi5;
extern struct platform_device msm_device_sdc1;
extern struct platform_device msm_device_sdc2;
extern struct platform_device msm_device_sdc3;
extern struct platform_device msm_device_sdc4;
extern struct platform_device msm_device_hsusb;
extern struct platform_device msm_device_otg;
extern struct platform_device msm_device_hsusb_host;
extern struct platform_device msm_device_i2c;
extern struct platform_device msm_device_smd;
extern struct platform_device msm_device_nand;
extern struct platform_device msm_device_mddi0;
extern struct platform_device msm_device_mddi1;
extern struct platform_device msm_device_mdp;
extern struct platform_device msm_clock_7x01a;
extern struct platform_device msm_clock_7x30;
extern struct platform_device msm_clock_8x50;
#endif

298
arch/arm/mach-msm/dma.c
View File

@ -1,298 +0,0 @@
/* linux/arch/arm/mach-msm/dma.c
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/module.h>
#include <mach/dma.h>
#include <mach/msm_iomap.h>
#define MSM_DMOV_CHANNEL_COUNT 16
#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
#if defined(CONFIG_ARCH_MSM7X30)
#define DMOV_SD_AARM DMOV_SD2
#else
#define DMOV_SD_AARM DMOV_SD3
#endif
#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch)
#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch)
#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch)
#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch)
#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch)
#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch)
#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch)
#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch)
#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch)
#define DMOV_ISR DMOV_SD_AARM(0x380, 0)
#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch)
enum {
MSM_DMOV_PRINT_ERRORS = 1,
MSM_DMOV_PRINT_IO = 2,
MSM_DMOV_PRINT_FLOW = 4
};
static DEFINE_SPINLOCK(msm_dmov_lock);
static struct clk *msm_dmov_clk;
static unsigned int channel_active;
static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
#define MSM_DMOV_DPRINTF(mask, format, args...) \
do { \
if ((mask) & msm_dmov_print_mask) \
printk(KERN_ERR format, args); \
} while (0)
#define PRINT_ERROR(format, args...) \
MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
#define PRINT_IO(format, args...) \
MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
#define PRINT_FLOW(format, args...) \
MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
{
writel((graceful << 31), DMOV_FLUSH0(id));
}
EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
{
unsigned long irq_flags;
unsigned int status;
spin_lock_irqsave(&msm_dmov_lock, irq_flags);
if (!channel_active)
clk_enable(msm_dmov_clk);
dsb();
status = readl(DMOV_STATUS(id));
if (list_empty(&ready_commands[id]) &&
(status & DMOV_STATUS_CMD_PTR_RDY)) {
#if 0
if (list_empty(&active_commands[id])) {
PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
}
#endif
if (cmd->execute_func)
cmd->execute_func(cmd);
PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
list_add_tail(&cmd->list, &active_commands[id]);
if (!channel_active)
enable_irq(INT_ADM_AARM);
channel_active |= 1U << id;
writel(cmd->cmdptr, DMOV_CMD_PTR(id));
} else {
if (!channel_active)
clk_disable(msm_dmov_clk);
if (list_empty(&active_commands[id]))
PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
list_add_tail(&cmd->list, &ready_commands[id]);
}
spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
}
EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
struct msm_dmov_exec_cmdptr_cmd {
struct msm_dmov_cmd dmov_cmd;
struct completion complete;
unsigned id;
unsigned int result;
struct msm_dmov_errdata err;
};
static void
dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
unsigned int result,
struct msm_dmov_errdata *err)
{
struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
cmd->result = result;
if (result != 0x80000002 && err)
memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
complete(&cmd->complete);
}
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
{
struct msm_dmov_exec_cmdptr_cmd cmd;
PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
cmd.dmov_cmd.cmdptr = cmdptr;
cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
cmd.dmov_cmd.execute_func = NULL;
cmd.id = id;
init_completion(&cmd.complete);
msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
wait_for_completion(&cmd.complete);
if (cmd.result != 0x80000002) {
PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n",
id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
return -EIO;
}
PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
return 0;
}
static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
{
unsigned int int_status, mask, id;
unsigned long irq_flags;
unsigned int ch_status;
unsigned int ch_result;
struct msm_dmov_cmd *cmd;
spin_lock_irqsave(&msm_dmov_lock, irq_flags);
int_status = readl(DMOV_ISR); /* read and clear interrupt */
PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
while (int_status) {
mask = int_status & -int_status;
id = fls(mask) - 1;
PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
int_status &= ~mask;
ch_status = readl(DMOV_STATUS(id));
if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
continue;
}
do {
ch_result = readl(DMOV_RSLT(id));
if (list_empty(&active_commands[id])) {
PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
"with no active command, status %x, result %x\n",
id, ch_status, ch_result);
cmd = NULL;
} else
cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
if (ch_result & DMOV_RSLT_DONE) {
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
id, ch_status);
PRINT_IO("msm_datamover_irq_handler id %d, got result "
"for %p, result %x\n", id, cmd, ch_result);
if (cmd) {
list_del(&cmd->list);
dsb();
cmd->complete_func(cmd, ch_result, NULL);
}
}
if (ch_result & DMOV_RSLT_FLUSH) {
struct msm_dmov_errdata errdata;
errdata.flush[0] = readl(DMOV_FLUSH0(id));
errdata.flush[1] = readl(DMOV_FLUSH1(id));
errdata.flush[2] = readl(DMOV_FLUSH2(id));
errdata.flush[3] = readl(DMOV_FLUSH3(id));
errdata.flush[4] = readl(DMOV_FLUSH4(id));
errdata.flush[5] = readl(DMOV_FLUSH5(id));
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
if (cmd) {
list_del(&cmd->list);
dsb();
cmd->complete_func(cmd, ch_result, &errdata);
}
}
if (ch_result & DMOV_RSLT_ERROR) {
struct msm_dmov_errdata errdata;
errdata.flush[0] = readl(DMOV_FLUSH0(id));
errdata.flush[1] = readl(DMOV_FLUSH1(id));
errdata.flush[2] = readl(DMOV_FLUSH2(id));
errdata.flush[3] = readl(DMOV_FLUSH3(id));
errdata.flush[4] = readl(DMOV_FLUSH4(id));
errdata.flush[5] = readl(DMOV_FLUSH5(id));
PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
if (cmd) {
list_del(&cmd->list);
dsb();
cmd->complete_func(cmd, ch_result, &errdata);
}
/* this does not seem to work, once we get an error */
/* the datamover will no longer accept commands */
writel(0, DMOV_FLUSH0(id));
}
ch_status = readl(DMOV_STATUS(id));
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
list_move_tail(&cmd->list, &active_commands[id]);
if (cmd->execute_func)
cmd->execute_func(cmd);
PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
writel(cmd->cmdptr, DMOV_CMD_PTR(id));
}
} while (ch_status & DMOV_STATUS_RSLT_VALID);
if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
channel_active &= ~(1U << id);
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
}
if (!channel_active) {
disable_irq_nosync(INT_ADM_AARM);
clk_disable(msm_dmov_clk);
}
spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
return IRQ_HANDLED;
}
static int __init msm_init_datamover(void)
{
int i;
int ret;
struct clk *clk;
for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
INIT_LIST_HEAD(&ready_commands[i]);
INIT_LIST_HEAD(&active_commands[i]);
writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
}
clk = clk_get(NULL, "adm_clk");
if (IS_ERR(clk))
return PTR_ERR(clk);
clk_prepare(clk);
msm_dmov_clk = clk;
ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
if (ret)
return ret;
disable_irq(INT_ADM_AARM);
return 0;
}
module_init(msm_init_datamover);

51
arch/arm/mach-msm/gpiomux-8x50.c
View File

@ -1,51 +0,0 @@
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include "gpiomux.h"
#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE)
#define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\
| GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
#define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\
| GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
#else
#define SDCC_DAT_0_3_CMD_ACTV_CFG 0
#define SDCC_CLK_ACTV_CFG 0
#endif
#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\
| GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA)
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
[86] = { /* UART3 RX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_1 | GPIOMUX_VALID,
},
[87] = { /* UART3 TX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_1 | GPIOMUX_VALID,
},
/* SDC1 data[3:0] & CMD */
[51 ... 55] = {
.active = SDCC_DAT_0_3_CMD_ACTV_CFG,
.suspended = SDC1_SUSPEND_CONFIG
},
/* SDC1 CLK */
[56] = {
.active = SDCC_CLK_ACTV_CFG,
.suspended = SDC1_SUSPEND_CONFIG
},
};

67
arch/arm/mach-msm/gpiomux-v1.h
View File

@ -1,67 +0,0 @@
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
#if defined(CONFIG_ARCH_MSM7X30)
#define GPIOMUX_NGPIOS 182
#elif defined(CONFIG_ARCH_QSD8X50)
#define GPIOMUX_NGPIOS 165
#else
#define GPIOMUX_NGPIOS 133
#endif
typedef u32 gpiomux_config_t;
enum {
GPIOMUX_DRV_2MA = 0UL << 17,
GPIOMUX_DRV_4MA = 1UL << 17,
GPIOMUX_DRV_6MA = 2UL << 17,
GPIOMUX_DRV_8MA = 3UL << 17,
GPIOMUX_DRV_10MA = 4UL << 17,
GPIOMUX_DRV_12MA = 5UL << 17,
GPIOMUX_DRV_14MA = 6UL << 17,
GPIOMUX_DRV_16MA = 7UL << 17,
};
enum {
GPIOMUX_FUNC_GPIO = 0UL,
GPIOMUX_FUNC_1 = 1UL,
GPIOMUX_FUNC_2 = 2UL,
GPIOMUX_FUNC_3 = 3UL,
GPIOMUX_FUNC_4 = 4UL,
GPIOMUX_FUNC_5 = 5UL,
GPIOMUX_FUNC_6 = 6UL,
GPIOMUX_FUNC_7 = 7UL,
GPIOMUX_FUNC_8 = 8UL,
GPIOMUX_FUNC_9 = 9UL,
GPIOMUX_FUNC_A = 10UL,
GPIOMUX_FUNC_B = 11UL,
GPIOMUX_FUNC_C = 12UL,
GPIOMUX_FUNC_D = 13UL,
GPIOMUX_FUNC_E = 14UL,
GPIOMUX_FUNC_F = 15UL,
};
enum {
GPIOMUX_PULL_NONE = 0UL << 15,
GPIOMUX_PULL_DOWN = 1UL << 15,
GPIOMUX_PULL_KEEPER = 2UL << 15,
GPIOMUX_PULL_UP = 3UL << 15,
};
#endif

111
arch/arm/mach-msm/gpiomux.c
View File

@ -1,111 +0,0 @@
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/spinlock.h>
#include "gpiomux.h"
#include "proc_comm.h"
static DEFINE_SPINLOCK(gpiomux_lock);
static void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
{
unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) |
((gpio & 0x3ff) << 4);
unsigned tlmm_disable = 0;
int rc;
rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
&tlmm_config, &tlmm_disable);
if (rc)
pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
__func__, rc, tlmm_config, tlmm_disable);
}
int msm_gpiomux_write(unsigned gpio,
gpiomux_config_t active,
gpiomux_config_t suspended)
{
struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
unsigned long irq_flags;
gpiomux_config_t setting;
if (gpio >= GPIOMUX_NGPIOS)
return -EINVAL;
spin_lock_irqsave(&gpiomux_lock, irq_flags);
if (active & GPIOMUX_VALID)
cfg->active = active;
if (suspended & GPIOMUX_VALID)
cfg->suspended = suspended;
setting = cfg->ref ? active : suspended;
if (setting & GPIOMUX_VALID)
__msm_gpiomux_write(gpio, setting);
spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
return 0;
}
EXPORT_SYMBOL(msm_gpiomux_write);
int msm_gpiomux_get(unsigned gpio)
{
struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
unsigned long irq_flags;
if (gpio >= GPIOMUX_NGPIOS)
return -EINVAL;
spin_lock_irqsave(&gpiomux_lock, irq_flags);
if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
__msm_gpiomux_write(gpio, cfg->active);
spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
return 0;
}
EXPORT_SYMBOL(msm_gpiomux_get);
int msm_gpiomux_put(unsigned gpio)
{
struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
unsigned long irq_flags;
if (gpio >= GPIOMUX_NGPIOS)
return -EINVAL;
spin_lock_irqsave(&gpiomux_lock, irq_flags);
BUG_ON(cfg->ref == 0);
if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
__msm_gpiomux_write(gpio, cfg->suspended);
spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
return 0;
}
EXPORT_SYMBOL(msm_gpiomux_put);
static int __init gpiomux_init(void)
{
unsigned n;
for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
msm_gpiomux_configs[n].ref = 0;
if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
continue;
__msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
}
return 0;
}
postcore_initcall(gpiomux_init);

84
arch/arm/mach-msm/gpiomux.h
View File

@ -1,84 +0,0 @@
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
#include <linux/bitops.h>
#include <linux/errno.h>
#include <mach/msm_gpiomux.h>
#include "gpiomux-v1.h"
/**
* struct msm_gpiomux_config: gpiomux settings for one gpio line.
*
* A complete gpiomux config is the bitwise-or of a drive-strength,
* function, and pull. For functions other than GPIO, the OE
* is hard-wired according to the function. For GPIO mode,
* OE is controlled by gpiolib.
*
* Available settings differ by target; see the gpiomux header
* specific to your target arch for available configurations.
*
* @active: The configuration to be installed when the line is
* active, or its reference count is > 0.
* @suspended: The configuration to be installed when the line
* is suspended, or its reference count is 0.
* @ref: The reference count of the line. For internal use of
* the gpiomux framework only.
*/
struct msm_gpiomux_config {
gpiomux_config_t active;
gpiomux_config_t suspended;
unsigned ref;
};
/**
* @GPIOMUX_VALID: If set, the config field contains 'good data'.
* The absence of this bit will prevent the gpiomux
* system from applying the configuration under all
* circumstances.
*/
enum {
GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
GPIOMUX_CTL_MASK = GPIOMUX_VALID,
};
#ifdef CONFIG_MSM_GPIOMUX
/* Each architecture must provide its own instance of this table.
* To avoid having gpiomux manage any given gpio, one or both of
* the entries can avoid setting GPIOMUX_VALID - the absence
* of that flag will prevent the configuration from being applied
* during state transitions.
*/
extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
/* Install a new configuration to the gpio line. To avoid overwriting
* a configuration, leave the VALID bit out.
*/
int msm_gpiomux_write(unsigned gpio,
gpiomux_config_t active,
gpiomux_config_t suspended);
#else
static inline int msm_gpiomux_write(unsigned gpio,
gpiomux_config_t active,
gpiomux_config_t suspended)
{
return -ENOSYS;
}
#endif
#endif

31
arch/arm/mach-msm/include/mach/clk.h
View File

@ -1,31 +0,0 @@
/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_CLK_H
#define __MACH_CLK_H
/* Magic rate value for use with PM QOS to request the board's maximum
* supported AXI rate. PM QOS will only pass positive s32 rate values
* through to the clock driver, so INT_MAX is used.
*/
#define MSM_AXI_MAX_FREQ LONG_MAX
enum clk_reset_action {
CLK_RESET_DEASSERT = 0,
CLK_RESET_ASSERT = 1
};
struct clk;
/* Assert/Deassert reset to a hardware block associated with a clock */
int clk_reset(struct clk *clk, enum clk_reset_action action);
#endif

151
arch/arm/mach-msm/include/mach/dma.h
View File

@ -1,151 +0,0 @@
/* linux/include/asm-arm/arch-msm/dma.h
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MSM_DMA_H
#include <linux/list.h>
struct msm_dmov_errdata {
uint32_t flush[6];
};
struct msm_dmov_cmd {
struct list_head list;
unsigned int cmdptr;
void (*complete_func)(struct msm_dmov_cmd *cmd,
unsigned int result,
struct msm_dmov_errdata *err);
void (*execute_func)(struct msm_dmov_cmd *cmd);
void *data;
};
#ifndef CONFIG_ARCH_MSM8X60
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
#else
static inline
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
static inline
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
static inline
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
#endif
#define DMOV_CMD_LIST (0 << 29) /* does not work */
#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
#define DMOV_RSLT_ERROR (1 << 3)
#define DMOV_RSLT_FLUSH (1 << 2)
#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
#define DMOV_STATUS_RSLT_VALID (1 << 1)
#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
#define DMOV_CONFIG_IRQ_EN (1 << 0)
/* channel assignments */
#define DMOV_NAND_CHAN 7
#define DMOV_NAND_CRCI_CMD 5
#define DMOV_NAND_CRCI_DATA 4
#define DMOV_SDC1_CHAN 8
#define DMOV_SDC1_CRCI 6
#define DMOV_SDC2_CHAN 8
#define DMOV_SDC2_CRCI 7
#define DMOV_TSIF_CHAN 10
#define DMOV_TSIF_CRCI 10
#define DMOV_USB_CHAN 11
/* no client rate control ifc (eg, ram) */
#define DMOV_NONE_CRCI 0
/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
* is going to walk a list of 32bit pointers as described below. Each
* pointer points to a *array* of dmov_s, etc structs. The last pointer
* in the list is marked with CMD_PTR_LP. The last struct in each array
* is marked with CMD_LC (see below).
*/
#define CMD_PTR_ADDR(addr) ((addr) >> 3)
#define CMD_PTR_LP (1 << 31) /* last pointer */
#define CMD_PTR_PT (3 << 29) /* ? */
/* Single Item Mode */
typedef struct {
unsigned cmd;
unsigned src;
unsigned dst;
unsigned len;
} dmov_s;
/* Scatter/Gather Mode */
typedef struct {
unsigned cmd;
unsigned src_dscr;
unsigned dst_dscr;
unsigned _reserved;
} dmov_sg;
/* Box mode */
typedef struct {
uint32_t cmd;
uint32_t src_row_addr;
uint32_t dst_row_addr;
uint32_t src_dst_len;
uint32_t num_rows;
uint32_t row_offset;
} dmov_box;
/* bits for the cmd field of the above structures */
#define CMD_LC (1 << 31) /* last command */
#define CMD_FR (1 << 22) /* force result -- does not work? */
#define CMD_OCU (1 << 21) /* other channel unblock */
#define CMD_OCB (1 << 20) /* other channel block */
#define CMD_TCB (1 << 19) /* ? */
#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/
#define CMD_SAH (1 << 17) /* source address hold -- does not work? */
#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */
#define CMD_MODE_SG (1 << 0) /* untested */
#define CMD_MODE_IND_SG (2 << 0) /* untested */
#define CMD_MODE_BOX (3 << 0) /* untested */
#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */
#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */
#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */
#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */
#define CMD_DST_CRCI(n) (((n) & 15) << 7)
#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
#endif

36
arch/arm/mach-msm/include/mach/entry-macro.S
View File

@ -1,36 +0,0 @@
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*/
#if !defined(CONFIG_ARM_GIC)
#include <mach/msm_iomap.h>
.macro get_irqnr_preamble, base, tmp
@ enable imprecise aborts
cpsie a
mov \base, #MSM_VIC_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ 0xD0 has irq# or old irq# if the irq has been handled
@ 0xD4 has irq# or -1 if none pending *but* if you just
@ read 0xD4 you never get the first irq for some reason
ldr \irqnr, [\base, #0xD0]
ldr \irqnr, [\base, #0xD4]
cmp \irqnr, #0xffffffff
.endm
#endif

18
arch/arm/mach-msm/include/mach/hardware.h
View File

@ -1,18 +0,0 @@
/* arch/arm/mach-msm/include/mach/hardware.h
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MSM_HARDWARE_H
#endif

75
arch/arm/mach-msm/include/mach/irqs-7x00.h
View File

@ -1,75 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*/
#ifndef __ASM_ARCH_MSM_IRQS_7X00_H
#define __ASM_ARCH_MSM_IRQS_7X00_H
/* MSM ARM11 Interrupt Numbers */
/* See 80-VE113-1 A, pp219-221 */
#define INT_A9_M2A_0 0
#define INT_A9_M2A_1 1
#define INT_A9_M2A_2 2
#define INT_A9_M2A_3 3
#define INT_A9_M2A_4 4
#define INT_A9_M2A_5 5
#define INT_A9_M2A_6 6
#define INT_GP_TIMER_EXP 7
#define INT_DEBUG_TIMER_EXP 8
#define INT_UART1 9
#define INT_UART2 10
#define INT_UART3 11
#define INT_UART1_RX 12
#define INT_UART2_RX 13
#define INT_UART3_RX 14
#define INT_USB_OTG 15
#define INT_MDDI_PRI 16
#define INT_MDDI_EXT 17
#define INT_MDDI_CLIENT 18
#define INT_MDP 19
#define INT_GRAPHICS 20
#define INT_ADM_AARM 21
#define INT_ADSP_A11 22
#define INT_ADSP_A9_A11 23
#define INT_SDC1_0 24
#define INT_SDC1_1 25
#define INT_SDC2_0 26
#define INT_SDC2_1 27
#define INT_KEYSENSE 28
#define INT_TCHSCRN_SSBI 29
#define INT_TCHSCRN1 30
#define INT_TCHSCRN2 31
#define INT_GPIO_GROUP1 (32 + 0)
#define INT_GPIO_GROUP2 (32 + 1)
#define INT_PWB_I2C (32 + 2)
#define INT_SOFTRESET (32 + 3)
#define INT_NAND_WR_ER_DONE (32 + 4)
#define INT_NAND_OP_DONE (32 + 5)
#define INT_PBUS_ARM11 (32 + 6)
#define INT_AXI_MPU_SMI (32 + 7)
#define INT_AXI_MPU_EBI1 (32 + 8)
#define INT_AD_HSSD (32 + 9)
#define INT_ARM11_PMU (32 + 10)
#define INT_ARM11_DMA (32 + 11)
#define INT_TSIF_IRQ (32 + 12)
#define INT_UART1DM_IRQ (32 + 13)
#define INT_UART1DM_RX (32 + 14)
#define INT_USB_HS (32 + 15)
#define INT_SDC3_0 (32 + 16)
#define INT_SDC3_1 (32 + 17)
#define INT_SDC4_0 (32 + 18)
#define INT_SDC4_1 (32 + 19)
#define INT_UART2DM_RX (32 + 20)
#define INT_UART2DM_IRQ (32 + 21)
/* 22-31 are reserved */
#define NR_MSM_IRQS 64
#define NR_GPIO_IRQS 122
#define NR_BOARD_IRQS 64
#endif

153
arch/arm/mach-msm/include/mach/irqs-7x30.h
View File

@ -1,153 +0,0 @@
/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MSM_IRQS_7X30_H
#define __ASM_ARCH_MSM_IRQS_7X30_H
/* MSM ACPU Interrupt Numbers */
#define INT_DEBUG_TIMER_EXP 0
#define INT_GPT0_TIMER_EXP 1
#define INT_GPT1_TIMER_EXP 2
#define INT_WDT0_ACCSCSSBARK 3
#define INT_WDT1_ACCSCSSBARK 4
#define INT_AVS_SVIC 5
#define INT_AVS_SVIC_SW_DONE 6
#define INT_SC_DBG_RX_FULL 7
#define INT_SC_DBG_TX_EMPTY 8
#define INT_ARM11_PM 9
#define INT_AVS_REQ_DOWN 10
#define INT_AVS_REQ_UP 11
#define INT_SC_ACG 12
/* SCSS_VICFIQSTS0[13:15] are RESERVED */
#define INT_L2_SVICCPUIRPTREQ 16
#define INT_L2_SVICDMANSIRPTREQ 17
#define INT_L2_SVICDMASIRPTREQ 18
#define INT_L2_SVICSLVIRPTREQ 19
#define INT_AD5A_MPROC_APPS_0 20
#define INT_AD5A_MPROC_APPS_1 21
#define INT_A9_M2A_0 22
#define INT_A9_M2A_1 23
#define INT_A9_M2A_2 24
#define INT_A9_M2A_3 25
#define INT_A9_M2A_4 26
#define INT_A9_M2A_5 27
#define INT_A9_M2A_6 28
#define INT_A9_M2A_7 29
#define INT_A9_M2A_8 30
#define INT_A9_M2A_9 31
#define INT_AXI_EBI1_SC (32 + 0)
#define INT_IMEM_ERR (32 + 1)
#define INT_AXI_EBI0_SC (32 + 2)
#define INT_PBUS_SC_IRQC (32 + 3)
#define INT_PERPH_BUS_BPM (32 + 4)
#define INT_CC_TEMP_SENSE (32 + 5)
#define INT_UXMC_EBI0 (32 + 6)
#define INT_UXMC_EBI1 (32 + 7)
#define INT_EBI2_OP_DONE (32 + 8)
#define INT_EBI2_WR_ER_DONE (32 + 9)
#define INT_TCSR_SPSS_CE (32 + 10)
#define INT_EMDH (32 + 11)
#define INT_PMDH (32 + 12)
#define INT_MDC (32 + 13)
#define INT_MIDI_TO_SUPSS (32 + 14)
#define INT_LPA_2 (32 + 15)
#define INT_GPIO_GROUP1_SECURE (32 + 16)
#define INT_GPIO_GROUP2_SECURE (32 + 17)
#define INT_GPIO_GROUP1 (32 + 18)
#define INT_GPIO_GROUP2 (32 + 19)
#define INT_MPRPH_SOFTRESET (32 + 20)
#define INT_PWB_I2C (32 + 21)
#define INT_PWB_I2C_2 (32 + 22)
#define INT_TSSC_SAMPLE (32 + 23)
#define INT_TSSC_PENUP (32 + 24)
#define INT_TCHSCRN_SSBI (32 + 25)
#define INT_FM_RDS (32 + 26)
#define INT_KEYSENSE (32 + 27)
#define INT_USB_OTG_HS (32 + 28)
#define INT_USB_OTG_HS2 (32 + 29)
#define INT_USB_OTG_HS3 (32 + 30)
#define INT_CSI (32 + 31)
#define INT_SPI_OUTPUT (64 + 0)
#define INT_SPI_INPUT (64 + 1)
#define INT_SPI_ERROR (64 + 2)
#define INT_UART1 (64 + 3)
#define INT_UART1_RX (64 + 4)
#define INT_UART2 (64 + 5)
#define INT_UART2_RX (64 + 6)
#define INT_UART3 (64 + 7)
#define INT_UART3_RX (64 + 8)
#define INT_UART1DM_IRQ (64 + 9)
#define INT_UART1DM_RX (64 + 10)
#define INT_UART2DM_IRQ (64 + 11)
#define INT_UART2DM_RX (64 + 12)
#define INT_TSIF (64 + 13)
#define INT_ADM_SC1 (64 + 14)
#define INT_ADM_SC2 (64 + 15)
#define INT_MDP (64 + 16)
#define INT_VPE (64 + 17)
#define INT_GRP_2D (64 + 18)
#define INT_GRP_3D (64 + 19)
#define INT_ROTATOR (64 + 20)
#define INT_MFC720 (64 + 21)
#define INT_JPEG (64 + 22)
#define INT_VFE (64 + 23)
#define INT_TV_ENC (64 + 24)
#define INT_PMIC_SSBI (64 + 25)
#define INT_MPM_1 (64 + 26)
#define INT_TCSR_SPSS_SAMPLE (64 + 27)
#define INT_TCSR_SPSS_PENUP (64 + 28)
#define INT_MPM_2 (64 + 29)
#define INT_SDC1_0 (64 + 30)
#define INT_SDC1_1 (64 + 31)
#define INT_SDC3_0 (96 + 0)
#define INT_SDC3_1 (96 + 1)
#define INT_SDC2_0 (96 + 2)
#define INT_SDC2_1 (96 + 3)
#define INT_SDC4_0 (96 + 4)
#define INT_SDC4_1 (96 + 5)
#define INT_PWB_QUP_IN (96 + 6)
#define INT_PWB_QUP_OUT (96 + 7)
#define INT_PWB_QUP_ERR (96 + 8)
#define INT_SCSS_WDT0_BITE (96 + 9)
/* SCSS_VICFIQSTS3[10:31] are RESERVED */
/* Retrofit universal macro names */
#define INT_ADM_AARM INT_ADM_SC2
#define INT_USB_HS INT_USB_OTG_HS
#define INT_USB_OTG INT_USB_OTG_HS
#define INT_TCHSCRN1 INT_TSSC_SAMPLE
#define INT_TCHSCRN2 INT_TSSC_PENUP
#define INT_GP_TIMER_EXP INT_GPT0_TIMER_EXP
#define INT_ADSP_A11 INT_AD5A_MPROC_APPS_0
#define INT_ADSP_A9_A11 INT_AD5A_MPROC_APPS_1
#define INT_MDDI_EXT INT_EMDH
#define INT_MDDI_PRI INT_PMDH
#define INT_MDDI_CLIENT INT_MDC
#define INT_NAND_WR_ER_DONE INT_EBI2_WR_ER_DONE
#define INT_NAND_OP_DONE INT_EBI2_OP_DONE
#define NR_MSM_IRQS 128
#define NR_GPIO_IRQS 182
#define PMIC8058_IRQ_BASE (NR_MSM_IRQS + NR_GPIO_IRQS)
#define NR_PMIC8058_GPIO_IRQS 40
#define NR_PMIC8058_MPP_IRQS 12
#define NR_PMIC8058_MISC_IRQS 8
#define NR_PMIC8058_IRQS (NR_PMIC8058_GPIO_IRQS +\
NR_PMIC8058_MPP_IRQS +\
NR_PMIC8058_MISC_IRQS)
#define NR_BOARD_IRQS NR_PMIC8058_IRQS
#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */

88
arch/arm/mach-msm/include/mach/irqs-8x50.h
View File

@ -1,88 +0,0 @@
/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H
#define __ASM_ARCH_MSM_IRQS_8XXX_H
/* MSM ACPU Interrupt Numbers */
#define INT_A9_M2A_0 0
#define INT_A9_M2A_1 1
#define INT_A9_M2A_2 2
#define INT_A9_M2A_3 3
#define INT_A9_M2A_4 4
#define INT_A9_M2A_5 5
#define INT_A9_M2A_6 6
#define INT_GP_TIMER_EXP 7
#define INT_DEBUG_TIMER_EXP 8
#define INT_SIRC_0 9
#define INT_SDC3_0 10
#define INT_SDC3_1 11
#define INT_SDC4_0 12
#define INT_SDC4_1 13
#define INT_AD6_EXT_VFR 14
#define INT_USB_OTG 15
#define INT_MDDI_PRI 16
#define INT_MDDI_EXT 17
#define INT_MDDI_CLIENT 18
#define INT_MDP 19
#define INT_GRAPHICS 20
#define INT_ADM_AARM 21
#define INT_ADSP_A11 22
#define INT_ADSP_A9_A11 23
#define INT_SDC1_0 24
#define INT_SDC1_1 25
#define INT_SDC2_0 26
#define INT_SDC2_1 27
#define INT_KEYSENSE 28
#define INT_TCHSCRN_SSBI 29
#define INT_TCHSCRN1 30
#define INT_TCHSCRN2 31
#define INT_TCSR_MPRPH_SC1 (32 + 0)
#define INT_USB_FS2 (32 + 1)
#define INT_PWB_I2C (32 + 2)
#define INT_SOFTRESET (32 + 3)
#define INT_NAND_WR_ER_DONE (32 + 4)
#define INT_NAND_OP_DONE (32 + 5)
#define INT_TCSR_MPRPH_SC2 (32 + 6)
#define INT_OP_PEN (32 + 7)
#define INT_AD_HSSD (32 + 8)
#define INT_ARM11_PM (32 + 9)
#define INT_SDMA_NON_SECURE (32 + 10)
#define INT_TSIF_IRQ (32 + 11)
#define INT_UART1DM_IRQ (32 + 12)
#define INT_UART1DM_RX (32 + 13)
#define INT_SDMA_SECURE (32 + 14)
#define INT_SI2S_SLAVE (32 + 15)
#define INT_SC_I2CPU (32 + 16)
#define INT_SC_DBG_RDTRFULL (32 + 17)
#define INT_SC_DBG_WDTRFULL (32 + 18)
#define INT_SCPLL_CTL_DONE (32 + 19)
#define INT_UART2DM_IRQ (32 + 20)
#define INT_UART2DM_RX (32 + 21)
#define INT_VDC_MEC (32 + 22)
#define INT_VDC_DB (32 + 23)
#define INT_VDC_AXI (32 + 24)
#define INT_VFE (32 + 25)
#define INT_USB_HS (32 + 26)
#define INT_AUDIO_OUT0 (32 + 27)
#define INT_AUDIO_OUT1 (32 + 28)
#define INT_CRYPTO (32 + 29)
#define INT_AD6M_IDLE (32 + 30)
#define INT_SIRC_1 (32 + 31)
#define NR_GPIO_IRQS 165
#define NR_MSM_IRQS 64
#define NR_BOARD_IRQS 64
#endif

37
arch/arm/mach-msm/include/mach/irqs.h
View File

@ -1,37 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MSM_IRQS_H
#define __ASM_ARCH_MSM_IRQS_H
#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31))
#if defined(CONFIG_ARCH_MSM7X30)
#include "irqs-7x30.h"
#elif defined(CONFIG_ARCH_QSD8X50)
#include "irqs-8x50.h"
#include "sirc.h"
#elif defined(CONFIG_ARCH_MSM_ARM11)
#include "irqs-7x00.h"
#else
#error "Unknown architecture specification"
#endif
#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
#define MSM_INT_TO_REG(base, irq) (base + irq / 32)
#endif

38
arch/arm/mach-msm/include/mach/msm_gpiomux.h
View File

@ -1,38 +0,0 @@
/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _LINUX_MSM_GPIOMUX_H
#define _LINUX_MSM_GPIOMUX_H
#ifdef CONFIG_MSM_GPIOMUX
/* Increment a gpio's reference count, possibly activating the line. */
int __must_check msm_gpiomux_get(unsigned gpio);
/* Decrement a gpio's reference count, possibly suspending the line. */
int msm_gpiomux_put(unsigned gpio);
#else
static inline int __must_check msm_gpiomux_get(unsigned gpio)
{
return -ENOSYS;
}
static inline int msm_gpiomux_put(unsigned gpio)
{
return -ENOSYS;
}
#endif
#endif /* _LINUX_MSM_GPIOMUX_H */

108
arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
View File

@ -1,108 +0,0 @@
/* arch/arm/mach-msm/include/mach/msm_iomap.h
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* The MSM peripherals are spread all over across 768MB of physical
* space, which makes just having a simple IO_ADDRESS macro to slide
* them into the right virtual location rough. Instead, we will
* provide a master phys->virt mapping for peripherals here.
*
*/
#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H
#define __ASM_ARCH_MSM_IOMAP_7X00_H
#include <asm/sizes.h>
/* Physical base address and size of peripherals.
* Ordered by the virtual base addresses they will be mapped at.
*
* MSM_VIC_BASE must be an value that can be loaded via a "mov"
* instruction, otherwise entry-macro.S will not compile.
*
* If you add or remove entries here, you'll want to edit the
* msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
* changes.
*
*/
#define MSM_VIC_BASE IOMEM(0xE0000000)
#define MSM_VIC_PHYS 0xC0000000
#define MSM_VIC_SIZE SZ_4K
#define MSM7X00_CSR_PHYS 0xC0100000
#define MSM7X00_CSR_SIZE SZ_4K
#define MSM_DMOV_BASE IOMEM(0xE0002000)
#define MSM_DMOV_PHYS 0xA9700000
#define MSM_DMOV_SIZE SZ_4K
#define MSM7X00_GPIO1_PHYS 0xA9200000
#define MSM7X00_GPIO1_SIZE SZ_4K
#define MSM7X00_GPIO2_PHYS 0xA9300000
#define MSM7X00_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xA8600000
#define MSM_CLK_CTL_SIZE SZ_4K
#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
#define MSM_SHARED_RAM_PHYS 0x01F00000
#define MSM_SHARED_RAM_SIZE SZ_1M
#define MSM_UART1_PHYS 0xA9A00000
#define MSM_UART1_SIZE SZ_4K
#define MSM_UART2_PHYS 0xA9B00000
#define MSM_UART2_SIZE SZ_4K
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
#define MSM_SDC1_PHYS 0xA0400000
#define MSM_SDC1_SIZE SZ_4K
#define MSM_SDC2_PHYS 0xA0500000
#define MSM_SDC2_SIZE SZ_4K
#define MSM_SDC3_PHYS 0xA0600000
#define MSM_SDC3_SIZE SZ_4K
#define MSM_SDC4_PHYS 0xA0700000
#define MSM_SDC4_SIZE SZ_4K
#define MSM_I2C_PHYS 0xA9900000
#define MSM_I2C_SIZE SZ_4K
#define MSM_HSUSB_PHYS 0xA0800000
#define MSM_HSUSB_SIZE SZ_4K
#define MSM_PMDH_PHYS 0xAA600000
#define MSM_PMDH_SIZE SZ_4K
#define MSM_EMDH_PHYS 0xAA700000
#define MSM_EMDH_SIZE SZ_4K
#define MSM_MDP_PHYS 0xAA200000
#define MSM_MDP_SIZE 0x000F0000
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M
#define MSM_AD5_PHYS 0xAC000000
#define MSM_AD5_SIZE (SZ_1M*13)
#endif

103
arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
View File

@ -1,103 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* The MSM peripherals are spread all over across 768MB of physical
* space, which makes just having a simple IO_ADDRESS macro to slide
* them into the right virtual location rough. Instead, we will
* provide a master phys->virt mapping for peripherals here.
*
*/
#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H
#define __ASM_ARCH_MSM_IOMAP_7X30_H
/* Physical base address and size of peripherals.
* Ordered by the virtual base addresses they will be mapped at.
*
* MSM_VIC_BASE must be an value that can be loaded via a "mov"
* instruction, otherwise entry-macro.S will not compile.
*
* If you add or remove entries here, you'll want to edit the
* msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
* changes.
*
*/
#define MSM_VIC_BASE IOMEM(0xE0000000)
#define MSM_VIC_PHYS 0xC0080000
#define MSM_VIC_SIZE SZ_4K
#define MSM7X30_CSR_PHYS 0xC0100000
#define MSM7X30_CSR_SIZE SZ_4K
#define MSM_DMOV_BASE IOMEM(0xE0002000)
#define MSM_DMOV_PHYS 0xAC400000
#define MSM_DMOV_SIZE SZ_4K
#define MSM7X30_GPIO1_PHYS 0xAC001000
#define MSM7X30_GPIO1_SIZE SZ_4K
#define MSM7X30_GPIO2_PHYS 0xAC101000
#define MSM7X30_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xAB800000
#define MSM_CLK_CTL_SIZE SZ_4K
#define MSM_CLK_CTL_SH2_BASE IOMEM(0xE0006000)
#define MSM_CLK_CTL_SH2_PHYS 0xABA01000
#define MSM_CLK_CTL_SH2_SIZE SZ_4K
#define MSM_ACC_BASE IOMEM(0xE0007000)
#define MSM_ACC_PHYS 0xC0101000
#define MSM_ACC_SIZE SZ_4K
#define MSM_SAW_BASE IOMEM(0xE0008000)
#define MSM_SAW_PHYS 0xC0102000
#define MSM_SAW_SIZE SZ_4K
#define MSM_GCC_BASE IOMEM(0xE0009000)
#define MSM_GCC_PHYS 0xC0182000
#define MSM_GCC_SIZE SZ_4K
#define MSM_TCSR_BASE IOMEM(0xE000A000)
#define MSM_TCSR_PHYS 0xAB600000
#define MSM_TCSR_SIZE SZ_4K
#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
#define MSM_SHARED_RAM_PHYS 0x00100000
#define MSM_SHARED_RAM_SIZE SZ_1M
#define MSM_UART1_PHYS 0xACA00000
#define MSM_UART1_SIZE SZ_4K
#define MSM_UART2_PHYS 0xACB00000
#define MSM_UART2_SIZE SZ_4K
#define MSM_UART3_PHYS 0xACC00000
#define MSM_UART3_SIZE SZ_4K
#define MSM_MDC_BASE IOMEM(0xE0200000)
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M
#define MSM_AD5_BASE IOMEM(0xE0300000)
#define MSM_AD5_PHYS 0xA7000000
#define MSM_AD5_SIZE (SZ_1M*13)
#define MSM_HSUSB_PHYS 0xA3600000
#define MSM_HSUSB_SIZE SZ_1K
#endif

125
arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
View File

@ -1,125 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* The MSM peripherals are spread all over across 768MB of physical
* space, which makes just having a simple IO_ADDRESS macro to slide
* them into the right virtual location rough. Instead, we will
* provide a master phys->virt mapping for peripherals here.
*
*/
#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H
#define __ASM_ARCH_MSM_IOMAP_8X50_H
/* Physical base address and size of peripherals.
* Ordered by the virtual base addresses they will be mapped at.
*
* MSM_VIC_BASE must be an value that can be loaded via a "mov"
* instruction, otherwise entry-macro.S will not compile.
*
* If you add or remove entries here, you'll want to edit the
* msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
* changes.
*
*/
#define MSM_VIC_BASE IOMEM(0xE0000000)
#define MSM_VIC_PHYS 0xAC000000
#define MSM_VIC_SIZE SZ_4K
#define QSD8X50_CSR_PHYS 0xAC100000
#define QSD8X50_CSR_SIZE SZ_4K
#define MSM_DMOV_BASE IOMEM(0xE0002000)
#define MSM_DMOV_PHYS 0xA9700000
#define MSM_DMOV_SIZE SZ_4K
#define QSD8X50_GPIO1_PHYS 0xA9000000
#define QSD8X50_GPIO1_SIZE SZ_4K
#define QSD8X50_GPIO2_PHYS 0xA9100000
#define QSD8X50_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xA8600000
#define MSM_CLK_CTL_SIZE SZ_4K
#define MSM_SIRC_BASE IOMEM(0xE1006000)
#define MSM_SIRC_PHYS 0xAC200000
#define MSM_SIRC_SIZE SZ_4K
#define MSM_SCPLL_BASE IOMEM(0xE1007000)
#define MSM_SCPLL_PHYS 0xA8800000
#define MSM_SCPLL_SIZE SZ_4K
#ifdef CONFIG_MSM_SOC_REV_A
#define MSM_SMI_BASE 0xE0000000
#else
#define MSM_SMI_BASE 0x00000000
#endif
#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
#define MSM_SHARED_RAM_SIZE SZ_1M
#define MSM_UART1_PHYS 0xA9A00000
#define MSM_UART1_SIZE SZ_4K
#define MSM_UART2_PHYS 0xA9B00000
#define MSM_UART2_SIZE SZ_4K
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
#define MSM_MDC_BASE IOMEM(0xE0200000)
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M
#define MSM_AD5_BASE IOMEM(0xE0300000)
#define MSM_AD5_PHYS 0xAC000000
#define MSM_AD5_SIZE (SZ_1M*13)
#define MSM_I2C_SIZE SZ_4K
#define MSM_I2C_PHYS 0xA9900000
#define MSM_HSUSB_PHYS 0xA0800000
#define MSM_HSUSB_SIZE SZ_1K
#define MSM_NAND_PHYS 0xA0A00000
#define MSM_TSIF_PHYS (0xa0100000)
#define MSM_TSIF_SIZE (0x200)
#define MSM_TSSC_PHYS 0xAA300000
#define MSM_UART1DM_PHYS 0xA0200000
#define MSM_UART2DM_PHYS 0xA0900000
#define MSM_SDC1_PHYS 0xA0300000
#define MSM_SDC1_SIZE SZ_4K
#define MSM_SDC2_PHYS 0xA0400000
#define MSM_SDC2_SIZE SZ_4K
#define MSM_SDC3_PHYS 0xA0500000
#define MSM_SDC3_SIZE SZ_4K
#define MSM_SDC4_PHYS 0xA0600000
#define MSM_SDC4_SIZE SZ_4K
#endif

53
arch/arm/mach-msm/include/mach/msm_iomap.h
View File

@ -1,53 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* The MSM peripherals are spread all over across 768MB of physical
* space, which makes just having a simple IO_ADDRESS macro to slide
* them into the right virtual location rough. Instead, we will
* provide a master phys->virt mapping for peripherals here.
*
*/
#ifndef __ASM_ARCH_MSM_IOMAP_H
#define __ASM_ARCH_MSM_IOMAP_H
#include <asm/sizes.h>
/* Physical base address and size of peripherals.
* Ordered by the virtual base addresses they will be mapped at.
*
* MSM_VIC_BASE must be an value that can be loaded via a "mov"
* instruction, otherwise entry-macro.S will not compile.
*
* If you add or remove entries here, you'll want to edit the
* msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
* changes.
*
*/
#if defined(CONFIG_ARCH_MSM7X30)
#include "msm_iomap-7x30.h"
#elif defined(CONFIG_ARCH_QSD8X50)
#include "msm_iomap-8x50.h"
#else
#include "msm_iomap-7x00.h"
#endif
/* Virtual addresses shared across all MSM targets. */
#define MSM_CSR_BASE IOMEM(0xE0001000)
#define MSM_GPIO1_BASE IOMEM(0xE0003000)
#define MSM_GPIO2_BASE IOMEM(0xE0004000)
#endif

109
arch/arm/mach-msm/include/mach/msm_smd.h
View File

@ -1,109 +0,0 @@
/* linux/include/asm-arm/arch-msm/msm_smd.h
*
* Copyright (C) 2007 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ASM_ARCH_MSM_SMD_H
#define __ASM_ARCH_MSM_SMD_H
typedef struct smd_channel smd_channel_t;
extern int (*msm_check_for_modem_crash)(void);
/* warning: notify() may be called before open returns */
int smd_open(const char *name, smd_channel_t **ch, void *priv,
void (*notify)(void *priv, unsigned event));
#define SMD_EVENT_DATA 1
#define SMD_EVENT_OPEN 2
#define SMD_EVENT_CLOSE 3
int smd_close(smd_channel_t *ch);
/* passing a null pointer for data reads and discards */
int smd_read(smd_channel_t *ch, void *data, int len);
/* Write to stream channels may do a partial write and return
** the length actually written.
** Write to packet channels will never do a partial write --
** it will return the requested length written or an error.
*/
int smd_write(smd_channel_t *ch, const void *data, int len);
int smd_write_atomic(smd_channel_t *ch, const void *data, int len);
int smd_write_avail(smd_channel_t *ch);
int smd_read_avail(smd_channel_t *ch);
/* Returns the total size of the current packet being read.
** Returns 0 if no packets available or a stream channel.
*/
int smd_cur_packet_size(smd_channel_t *ch);
/* used for tty unthrottling and the like -- causes the notify()
** callback to be called from the same lock context as is used
** when it is called from channel updates
*/
void smd_kick(smd_channel_t *ch);
#if 0
/* these are interruptable waits which will block you until the specified
** number of bytes are readable or writable.
*/
int smd_wait_until_readable(smd_channel_t *ch, int bytes);
int smd_wait_until_writable(smd_channel_t *ch, int bytes);
#endif
typedef enum {
SMD_PORT_DS = 0,
SMD_PORT_DIAG,
SMD_PORT_RPC_CALL,
SMD_PORT_RPC_REPLY,
SMD_PORT_BT,
SMD_PORT_CONTROL,
SMD_PORT_MEMCPY_SPARE1,
SMD_PORT_DATA1,
SMD_PORT_DATA2,
SMD_PORT_DATA3,
SMD_PORT_DATA4,
SMD_PORT_DATA5,
SMD_PORT_DATA6,
SMD_PORT_DATA7,
SMD_PORT_DATA8,
SMD_PORT_DATA9,
SMD_PORT_DATA10,
SMD_PORT_DATA11,
SMD_PORT_DATA12,
SMD_PORT_DATA13,
SMD_PORT_DATA14,
SMD_PORT_DATA15,
SMD_PORT_DATA16,
SMD_PORT_DATA17,
SMD_PORT_DATA18,
SMD_PORT_DATA19,
SMD_PORT_DATA20,
SMD_PORT_GPS_NMEA,
SMD_PORT_BRIDGE_1,
SMD_PORT_BRIDGE_2,
SMD_PORT_BRIDGE_3,
SMD_PORT_BRIDGE_4,
SMD_PORT_BRIDGE_5,
SMD_PORT_LOOPBACK,
SMD_PORT_CS_APPS_MODEM,
SMD_PORT_CS_APPS_DSP,
SMD_PORT_CS_MODEM_DSP,
SMD_NUM_PORTS,
} smd_port_id_type;
#endif

98
arch/arm/mach-msm/include/mach/sirc.h
View File

@ -1,98 +0,0 @@
/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MSM_SIRC_H
#define __ASM_ARCH_MSM_SIRC_H
struct sirc_regs_t {
void *int_enable;
void *int_enable_clear;
void *int_enable_set;
void *int_type;
void *int_polarity;
void *int_clear;
};
struct sirc_cascade_regs {
void *int_status;
unsigned int cascade_irq;
};
void msm_init_sirc(void);
void msm_sirc_enter_sleep(void);
void msm_sirc_exit_sleep(void);
#if defined(CONFIG_ARCH_MSM_SCORPION)
#include <mach/msm_iomap.h>
/*
* Secondary interrupt controller interrupts
*/
#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS)
#define INT_UART1 (FIRST_SIRC_IRQ + 0)
#define INT_UART2 (FIRST_SIRC_IRQ + 1)
#define INT_UART3 (FIRST_SIRC_IRQ + 2)
#define INT_UART1_RX (FIRST_SIRC_IRQ + 3)
#define INT_UART2_RX (FIRST_SIRC_IRQ + 4)
#define INT_UART3_RX (FIRST_SIRC_IRQ + 5)
#define INT_SPI_INPUT (FIRST_SIRC_IRQ + 6)
#define INT_SPI_OUTPUT (FIRST_SIRC_IRQ + 7)
#define INT_SPI_ERROR (FIRST_SIRC_IRQ + 8)
#define INT_GPIO_GROUP1 (FIRST_SIRC_IRQ + 9)
#define INT_GPIO_GROUP2 (FIRST_SIRC_IRQ + 10)
#define INT_GPIO_GROUP1_SECURE (FIRST_SIRC_IRQ + 11)
#define INT_GPIO_GROUP2_SECURE (FIRST_SIRC_IRQ + 12)
#define INT_AVS_SVIC (FIRST_SIRC_IRQ + 13)
#define INT_AVS_REQ_UP (FIRST_SIRC_IRQ + 14)
#define INT_AVS_REQ_DOWN (FIRST_SIRC_IRQ + 15)
#define INT_PBUS_ERR (FIRST_SIRC_IRQ + 16)
#define INT_AXI_ERR (FIRST_SIRC_IRQ + 17)
#define INT_SMI_ERR (FIRST_SIRC_IRQ + 18)
#define INT_EBI1_ERR (FIRST_SIRC_IRQ + 19)
#define INT_IMEM_ERR (FIRST_SIRC_IRQ + 20)
#define INT_TEMP_SENSOR (FIRST_SIRC_IRQ + 21)
#define INT_TV_ENC (FIRST_SIRC_IRQ + 22)
#define INT_GRP2D (FIRST_SIRC_IRQ + 23)
#define INT_GSBI_QUP (FIRST_SIRC_IRQ + 24)
#define INT_SC_ACG (FIRST_SIRC_IRQ + 25)
#define INT_WDT0 (FIRST_SIRC_IRQ + 26)
#define INT_WDT1 (FIRST_SIRC_IRQ + 27)
#if defined(CONFIG_MSM_SOC_REV_A)
#define NR_SIRC_IRQS 28
#define SIRC_MASK 0x0FFFFFFF
#else
#define NR_SIRC_IRQS 23
#define SIRC_MASK 0x007FFFFF
#endif
#define LAST_SIRC_IRQ (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1)
#define SPSS_SIRC_INT_SELECT (MSM_SIRC_BASE + 0x00)
#define SPSS_SIRC_INT_ENABLE (MSM_SIRC_BASE + 0x04)
#define SPSS_SIRC_INT_ENABLE_CLEAR (MSM_SIRC_BASE + 0x08)
#define SPSS_SIRC_INT_ENABLE_SET (MSM_SIRC_BASE + 0x0C)
#define SPSS_SIRC_INT_TYPE (MSM_SIRC_BASE + 0x10)
#define SPSS_SIRC_INT_POLARITY (MSM_SIRC_BASE + 0x14)
#define SPSS_SIRC_SECURITY (MSM_SIRC_BASE + 0x18)
#define SPSS_SIRC_IRQ_STATUS (MSM_SIRC_BASE + 0x1C)
#define SPSS_SIRC_IRQ1_STATUS (MSM_SIRC_BASE + 0x20)
#define SPSS_SIRC_RAW_STATUS (MSM_SIRC_BASE + 0x24)
#define SPSS_SIRC_INT_CLEAR (MSM_SIRC_BASE + 0x28)
#define SPSS_SIRC_SOFT_INT (MSM_SIRC_BASE + 0x2C)
#endif
#endif

29
arch/arm/mach-msm/include/mach/vreg.h
View File

@ -1,29 +0,0 @@
/* linux/include/asm-arm/arch-msm/vreg.h
*
* Copyright (C) 2008 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_VREG_H
#define __ARCH_ARM_MACH_MSM_VREG_H
struct vreg;
struct vreg *vreg_get(struct device *dev, const char *id);
void vreg_put(struct vreg *vreg);
int vreg_enable(struct vreg *vreg);
int vreg_disable(struct vreg *vreg);
int vreg_set_level(struct vreg *vreg, unsigned mv);
#endif

161
arch/arm/mach-msm/io.c
View File

@ -1,161 +0,0 @@
/* arch/arm/mach-msm/io.c
*
* MSM7K, QSD io support
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/page.h>
#include <mach/msm_iomap.h>
#include <asm/mach/map.h>
#include "common.h"
#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \
.virtual = (unsigned long) MSM_##name##_BASE, \
.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
.length = chip##_##name##_SIZE, \
.type = mem_type, \
}
#define MSM_DEVICE_TYPE(name, mem_type) \
MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
#define MSM_CHIP_DEVICE(name, chip) \
MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
#if defined(CONFIG_ARCH_MSM7X00A)
static struct map_desc msm_io_desc[] __initdata = {
MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
{
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
.length = MSM_SHARED_RAM_SIZE,
.type = MT_DEVICE,
},
#if defined(CONFIG_DEBUG_MSM_UART)
{
/* Must be last: virtual and pfn filled in by debug_ll_addr() */
.length = SZ_4K,
.type = MT_DEVICE_NONSHARED,
}
#endif
};
void __init msm_map_common_io(void)
{
size_t size = ARRAY_SIZE(msm_io_desc);
/* Make sure the peripheral register window is closed, since
* we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
* pages are peripheral interface or not.
*/
asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
#if defined(CONFIG_DEBUG_MSM_UART)
#ifdef CONFIG_MMU
debug_ll_addr(&msm_io_desc[size - 1].pfn,
&msm_io_desc[size - 1].virtual);
#endif
msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
#endif
iotable_init(msm_io_desc, size);
}
#endif
#ifdef CONFIG_ARCH_QSD8X50
static struct map_desc qsd8x50_io_desc[] __initdata = {
MSM_DEVICE(VIC),
MSM_CHIP_DEVICE(CSR, QSD8X50),
MSM_DEVICE(DMOV),
MSM_CHIP_DEVICE(GPIO1, QSD8X50),
MSM_CHIP_DEVICE(GPIO2, QSD8X50),
MSM_DEVICE(CLK_CTL),
MSM_DEVICE(SIRC),
MSM_DEVICE(SCPLL),
MSM_DEVICE(AD5),
MSM_DEVICE(MDC),
{
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
.length = MSM_SHARED_RAM_SIZE,
.type = MT_DEVICE,
},
};
void __init msm_map_qsd8x50_io(void)
{
debug_ll_io_init();
iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
}
#endif /* CONFIG_ARCH_QSD8X50 */
#ifdef CONFIG_ARCH_MSM7X30
static struct map_desc msm7x30_io_desc[] __initdata = {
MSM_DEVICE(VIC),
MSM_CHIP_DEVICE(CSR, MSM7X30),
MSM_DEVICE(DMOV),
MSM_CHIP_DEVICE(GPIO1, MSM7X30),
MSM_CHIP_DEVICE(GPIO2, MSM7X30),
MSM_DEVICE(CLK_CTL),
MSM_DEVICE(CLK_CTL_SH2),
MSM_DEVICE(AD5),
MSM_DEVICE(MDC),
MSM_DEVICE(ACC),
MSM_DEVICE(SAW),
MSM_DEVICE(GCC),
MSM_DEVICE(TCSR),
{
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
.length = MSM_SHARED_RAM_SIZE,
.type = MT_DEVICE,
},
};
void __init msm_map_msm7x30_io(void)
{
debug_ll_io_init();
iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
}
#endif /* CONFIG_ARCH_MSM7X30 */
#ifdef CONFIG_ARCH_MSM7X00A
void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
if (mtype == MT_DEVICE) {
/* The peripherals in the 88000000 - D0000000 range
* are only accessible by type MT_DEVICE_NONSHARED.
* Adjust mtype as necessary to make this "just work."
*/
if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
mtype = MT_DEVICE_NONSHARED;
}
return __arm_ioremap_caller(phys_addr, size, mtype, caller);
}
#endif

363
arch/arm/mach-msm/irq-vic.c
View File

@ -1,363 +0,0 @@
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/timer.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
#include "smd_private.h"
enum {
IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0,
IRQ_DEBUG_SLEEP_INT = 1U << 1,
IRQ_DEBUG_SLEEP_ABORT = 1U << 2,
IRQ_DEBUG_SLEEP = 1U << 3,
IRQ_DEBUG_SLEEP_REQUEST = 1U << 4,
};
static int msm_irq_debug_mask;
module_param_named(debug_mask, msm_irq_debug_mask, int,
S_IRUGO | S_IWUSR | S_IWGRP);
#define VIC_REG(off) (MSM_VIC_BASE + (off))
#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4)
#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3)
#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
#define VIC_INT_SELECT2 VIC_REG(0x0008) /* 1: FIQ, 0: IRQ */
#define VIC_INT_SELECT3 VIC_REG(0x000C) /* 1: FIQ, 0: IRQ */
#define VIC_INT_EN0 VIC_REG(0x0010)
#define VIC_INT_EN1 VIC_REG(0x0014)
#define VIC_INT_EN2 VIC_REG(0x0018)
#define VIC_INT_EN3 VIC_REG(0x001C)
#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
#define VIC_INT_ENCLEAR2 VIC_REG(0x0028)
#define VIC_INT_ENCLEAR3 VIC_REG(0x002C)
#define VIC_INT_ENSET0 VIC_REG(0x0030)
#define VIC_INT_ENSET1 VIC_REG(0x0034)
#define VIC_INT_ENSET2 VIC_REG(0x0038)
#define VIC_INT_ENSET3 VIC_REG(0x003C)
#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
#define VIC_INT_TYPE2 VIC_REG(0x0048) /* 1: EDGE, 0: LEVEL */
#define VIC_INT_TYPE3 VIC_REG(0x004C) /* 1: EDGE, 0: LEVEL */
#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
#define VIC_INT_POLARITY2 VIC_REG(0x0058) /* 1: NEG, 0: POS */
#define VIC_INT_POLARITY3 VIC_REG(0x005C) /* 1: NEG, 0: POS */
#define VIC_NO_PEND_VAL VIC_REG(0x0060)
#if defined(CONFIG_ARCH_MSM_SCORPION)
#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064)
#define VIC_INT_MASTEREN VIC_REG(0x0068) /* 1: IRQ, 2: FIQ */
#define VIC_CONFIG VIC_REG(0x006C) /* 1: USE SC VIC */
#else
#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
#endif
#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
#define VIC_IRQ_STATUS2 VIC_REG(0x0088)
#define VIC_IRQ_STATUS3 VIC_REG(0x008C)
#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
#define VIC_FIQ_STATUS2 VIC_REG(0x0098)
#define VIC_FIQ_STATUS3 VIC_REG(0x009C)
#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
#define VIC_RAW_STATUS2 VIC_REG(0x00A8)
#define VIC_RAW_STATUS3 VIC_REG(0x00AC)
#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
#define VIC_INT_CLEAR2 VIC_REG(0x00B8)
#define VIC_INT_CLEAR3 VIC_REG(0x00BC)
#define VIC_SOFTINT0 VIC_REG(0x00C0)
#define VIC_SOFTINT1 VIC_REG(0x00C4)
#define VIC_SOFTINT2 VIC_REG(0x00C8)
#define VIC_SOFTINT3 VIC_REG(0x00CC)
#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
#if defined(CONFIG_ARCH_MSM_SCORPION)
#define VIC_FIQ_VEC_RD VIC_REG(0x00DC)
#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0)
#define VIC_FIQ_VEC_WR VIC_REG(0x00E4)
#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E8)
#define VIC_IRQ_IN_STACK VIC_REG(0x00EC)
#define VIC_FIQ_IN_SERVICE VIC_REG(0x00F0)
#define VIC_FIQ_IN_STACK VIC_REG(0x00F4)
#define VIC_TEST_BUS_SEL VIC_REG(0x00F8)
#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC)
#else
#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
#endif
#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
#if defined(CONFIG_ARCH_MSM7X30)
#define VIC_NUM_REGS 4
#else
#define VIC_NUM_REGS 2
#endif
#if VIC_NUM_REGS == 2
#define DPRINT_REGS(base_reg, format, ...) \
printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \
readl(base_reg ## 0), readl(base_reg ## 1))
#define DPRINT_ARRAY(array, format, ...) \
printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \
array[0], array[1])
#elif VIC_NUM_REGS == 4
#define DPRINT_REGS(base_reg, format, ...) \
printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \
readl(base_reg ## 0), readl(base_reg ## 1), \
readl(base_reg ## 2), readl(base_reg ## 3))
#define DPRINT_ARRAY(array, format, ...) \
printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \
array[0], array[1], \
array[2], array[3])
#else
#error "VIC_NUM_REGS set to illegal value"
#endif
static uint32_t msm_irq_smsm_wake_enable[2];
static struct {
uint32_t int_en[2];
uint32_t int_type;
uint32_t int_polarity;
uint32_t int_select;
} msm_irq_shadow_reg[VIC_NUM_REGS];
static uint32_t msm_irq_idle_disable[VIC_NUM_REGS];
#define SMSM_FAKE_IRQ (0xff)
static uint8_t msm_irq_to_smsm[NR_IRQS] = {
[INT_MDDI_EXT] = 1,
[INT_MDDI_PRI] = 2,
[INT_MDDI_CLIENT] = 3,
[INT_USB_OTG] = 4,
[INT_PWB_I2C] = 5,
[INT_SDC1_0] = 6,
[INT_SDC1_1] = 7,
[INT_SDC2_0] = 8,
[INT_SDC2_1] = 9,
[INT_ADSP_A9_A11] = 10,
[INT_UART1] = 11,
[INT_UART2] = 12,
[INT_UART3] = 13,
[INT_UART1_RX] = 14,
[INT_UART2_RX] = 15,
[INT_UART3_RX] = 16,
[INT_UART1DM_IRQ] = 17,
[INT_UART1DM_RX] = 18,
[INT_KEYSENSE] = 19,
#if !defined(CONFIG_ARCH_MSM7X30)
[INT_AD_HSSD] = 20,
#endif
[INT_NAND_WR_ER_DONE] = 21,
[INT_NAND_OP_DONE] = 22,
[INT_TCHSCRN1] = 23,
[INT_TCHSCRN2] = 24,
[INT_TCHSCRN_SSBI] = 25,
[INT_USB_HS] = 26,
[INT_UART2DM_RX] = 27,
[INT_UART2DM_IRQ] = 28,
[INT_SDC4_1] = 29,
[INT_SDC4_0] = 30,
[INT_SDC3_1] = 31,
[INT_SDC3_0] = 32,
/* fake wakeup interrupts */
[INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
[INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
[INT_A9_M2A_0] = SMSM_FAKE_IRQ,
[INT_A9_M2A_1] = SMSM_FAKE_IRQ,
[INT_A9_M2A_5] = SMSM_FAKE_IRQ,
[INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
[INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
[INT_ADSP_A11] = SMSM_FAKE_IRQ,
#ifdef CONFIG_ARCH_QSD8X50
[INT_SIRC_0] = SMSM_FAKE_IRQ,
[INT_SIRC_1] = SMSM_FAKE_IRQ,
#endif
};
static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val)
{
int i;
for (i = 0; i < VIC_NUM_REGS; i++)
writel(val, base + (i * 4));
}
static void msm_irq_ack(struct irq_data *d)
{
void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, d->irq);
writel(1 << (d->irq & 31), reg);
}
static void msm_irq_mask(struct irq_data *d)
{
void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, d->irq);
unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
uint32_t mask = 1UL << (d->irq & 31);
int smsm_irq = msm_irq_to_smsm[d->irq];
msm_irq_shadow_reg[index].int_en[0] &= ~mask;
writel(mask, reg);
if (smsm_irq == 0)
msm_irq_idle_disable[index] &= ~mask;
else {
mask = 1UL << (smsm_irq - 1);
msm_irq_smsm_wake_enable[0] &= ~mask;
}
}
static void msm_irq_unmask(struct irq_data *d)
{
void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, d->irq);
unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
uint32_t mask = 1UL << (d->irq & 31);
int smsm_irq = msm_irq_to_smsm[d->irq];
msm_irq_shadow_reg[index].int_en[0] |= mask;
writel(mask, reg);
if (smsm_irq == 0)
msm_irq_idle_disable[index] |= mask;
else {
mask = 1UL << (smsm_irq - 1);
msm_irq_smsm_wake_enable[0] |= mask;
}
}
static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
uint32_t mask = 1UL << (d->irq & 31);
int smsm_irq = msm_irq_to_smsm[d->irq];
if (smsm_irq == 0) {
printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", d->irq);
return -EINVAL;
}
if (on)
msm_irq_shadow_reg[index].int_en[1] |= mask;
else
msm_irq_shadow_reg[index].int_en[1] &= ~mask;
if (smsm_irq == SMSM_FAKE_IRQ)
return 0;
mask = 1UL << (smsm_irq - 1);
if (on)
msm_irq_smsm_wake_enable[1] |= mask;
else
msm_irq_smsm_wake_enable[1] &= ~mask;
return 0;
}
static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, d->irq);
void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, d->irq);
unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
int b = 1 << (d->irq & 31);
uint32_t polarity;
uint32_t type;
polarity = msm_irq_shadow_reg[index].int_polarity;
if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
polarity |= b;
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
polarity &= ~b;
writel(polarity, preg);
msm_irq_shadow_reg[index].int_polarity = polarity;
type = msm_irq_shadow_reg[index].int_type;
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
type |= b;
__irq_set_handler_locked(d->irq, handle_edge_irq);
}
if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
type &= ~b;
__irq_set_handler_locked(d->irq, handle_level_irq);
}
writel(type, treg);
msm_irq_shadow_reg[index].int_type = type;
return 0;
}
static struct irq_chip msm_irq_chip = {
.name = "msm",
.irq_disable = msm_irq_mask,
.irq_ack = msm_irq_ack,
.irq_mask = msm_irq_mask,
.irq_unmask = msm_irq_unmask,
.irq_set_wake = msm_irq_set_wake,
.irq_set_type = msm_irq_set_type,
};
void __init msm_init_irq(void)
{
unsigned n;
/* select level interrupts */
msm_irq_write_all_regs(VIC_INT_TYPE0, 0);
/* select highlevel interrupts */
msm_irq_write_all_regs(VIC_INT_POLARITY0, 0);
/* select IRQ for all INTs */
msm_irq_write_all_regs(VIC_INT_SELECT0, 0);
/* disable all INTs */
msm_irq_write_all_regs(VIC_INT_EN0, 0);
/* don't use vic */
writel(0, VIC_CONFIG);
/* enable interrupt controller */
writel(3, VIC_INT_MASTEREN);
for (n = 0; n < NR_MSM_IRQS; n++) {
irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
set_irq_flags(n, IRQF_VALID);
}
}

151
arch/arm/mach-msm/irq.c
View File

@ -1,151 +0,0 @@
/* linux/arch/arm/mach-msm/irq.c
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/timer.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
#define VIC_REG(off) (MSM_VIC_BASE + (off))
#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
#define VIC_INT_EN0 VIC_REG(0x0010)
#define VIC_INT_EN1 VIC_REG(0x0014)
#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
#define VIC_INT_ENSET0 VIC_REG(0x0030)
#define VIC_INT_ENSET1 VIC_REG(0x0034)
#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
#define VIC_NO_PEND_VAL VIC_REG(0x0060)
#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
#define VIC_SOFTINT0 VIC_REG(0x00C0)
#define VIC_SOFTINT1 VIC_REG(0x00C4)
#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
static void msm_irq_ack(struct irq_data *d)
{
void __iomem *reg = VIC_INT_CLEAR0 + ((d->irq & 32) ? 4 : 0);
writel(1 << (d->irq & 31), reg);
}
static void msm_irq_mask(struct irq_data *d)
{
void __iomem *reg = VIC_INT_ENCLEAR0 + ((d->irq & 32) ? 4 : 0);
writel(1 << (d->irq & 31), reg);
}
static void msm_irq_unmask(struct irq_data *d)
{
void __iomem *reg = VIC_INT_ENSET0 + ((d->irq & 32) ? 4 : 0);
writel(1 << (d->irq & 31), reg);
}
static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
{
return -EINVAL;
}
static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
void __iomem *treg = VIC_INT_TYPE0 + ((d->irq & 32) ? 4 : 0);
void __iomem *preg = VIC_INT_POLARITY0 + ((d->irq & 32) ? 4 : 0);
int b = 1 << (d->irq & 31);
if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
writel(readl(preg) | b, preg);
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
writel(readl(preg) & (~b), preg);
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
writel(readl(treg) | b, treg);
__irq_set_handler_locked(d->irq, handle_edge_irq);
}
if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
writel(readl(treg) & (~b), treg);
__irq_set_handler_locked(d->irq, handle_level_irq);
}
return 0;
}
static struct irq_chip msm_irq_chip = {
.name = "msm",
.irq_ack = msm_irq_ack,
.irq_mask = msm_irq_mask,
.irq_unmask = msm_irq_unmask,
.irq_set_wake = msm_irq_set_wake,
.irq_set_type = msm_irq_set_type,
};
void __init msm_init_irq(void)
{
unsigned n;
/* select level interrupts */
writel(0, VIC_INT_TYPE0);
writel(0, VIC_INT_TYPE1);
/* select highlevel interrupts */
writel(0, VIC_INT_POLARITY0);
writel(0, VIC_INT_POLARITY1);
/* select IRQ for all INTs */
writel(0, VIC_INT_SELECT0);
writel(0, VIC_INT_SELECT1);
/* disable all INTs */
writel(0, VIC_INT_EN0);
writel(0, VIC_INT_EN1);
/* don't use 1136 vic */
writel(0, VIC_CONFIG);
/* enable interrupt controller */
writel(1, VIC_INT_MASTEREN);
for (n = 0; n < NR_MSM_IRQS; n++) {
irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
set_irq_flags(n, IRQF_VALID);
}
}

71
arch/arm/mach-msm/last_radio_log.c
View File

@ -1,71 +0,0 @@
/* arch/arm/mach-msm/last_radio_log.c
*
* Extract the log from a modem crash though SMEM
*
* Copyright (C) 2007 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/uaccess.h>
#include "smd_private.h"
static void *radio_log_base;
static size_t radio_log_size;
extern void *smem_item(unsigned id, unsigned *size);
static ssize_t last_radio_log_read(struct file *file, char __user *buf,
size_t len, loff_t *offset)
{
return simple_read_from_buffer(buf, len, offset,
radio_log_base, radio_log_size);
}
static struct file_operations last_radio_log_fops = {
.read = last_radio_log_read,
.llseek = default_llseek,
};
void msm_init_last_radio_log(struct module *owner)
{
struct proc_dir_entry *entry;
if (last_radio_log_fops.owner) {
pr_err("%s: already claimed\n", __func__);
return;
}
radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size);
if (!radio_log_base) {
pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__);
return;
}
entry = proc_create("last_radio_log", S_IRUGO, NULL,
&last_radio_log_fops);
if (!entry) {
pr_err("%s: could not create proc entry for radio log\n",
__func__);
return;
}
pr_err("%s: last radio log is %d bytes long\n", __func__,
radio_log_size);
last_radio_log_fops.owner = owner;
proc_set_size(entry, radio_log_size);
}
EXPORT_SYMBOL(msm_init_last_radio_log);

129
arch/arm/mach-msm/proc_comm.c
View File

@ -1,129 +0,0 @@
/* arch/arm/mach-msm/proc_comm.c
*
* Copyright (C) 2007-2008 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/msm_iomap.h>
#include "proc_comm.h"
static inline void msm_a2m_int(uint32_t irq)
{
#if defined(CONFIG_ARCH_MSM7X30)
writel(1 << irq, MSM_GCC_BASE + 0x8);
#else
writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
#endif
}
static inline void notify_other_proc_comm(void)
{
msm_a2m_int(6);
}
#define APP_COMMAND 0x00
#define APP_STATUS 0x04
#define APP_DATA1 0x08
#define APP_DATA2 0x0C
#define MDM_COMMAND 0x10
#define MDM_STATUS 0x14
#define MDM_DATA1 0x18
#define MDM_DATA2 0x1C
static DEFINE_SPINLOCK(proc_comm_lock);
/* The higher level SMD support will install this to
* provide a way to check for and handle modem restart.
*/
int (*msm_check_for_modem_crash)(void);
/* Poll for a state change, checking for possible
* modem crashes along the way (so we don't wait
* forever while the ARM9 is blowing up).
*
* Return an error in the event of a modem crash and
* restart so the msm_proc_comm() routine can restart
* the operation from the beginning.
*/
static int proc_comm_wait_for(void __iomem *addr, unsigned value)
{
for (;;) {
if (readl(addr) == value)
return 0;
if (msm_check_for_modem_crash)
if (msm_check_for_modem_crash())
return -EAGAIN;
}
}
int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
{
void __iomem *base = MSM_SHARED_RAM_BASE;
unsigned long flags;
int ret;
spin_lock_irqsave(&proc_comm_lock, flags);
for (;;) {
if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
continue;
writel(cmd, base + APP_COMMAND);
writel(data1 ? *data1 : 0, base + APP_DATA1);
writel(data2 ? *data2 : 0, base + APP_DATA2);
notify_other_proc_comm();
if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
continue;
if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
if (data1)
*data1 = readl(base + APP_DATA1);
if (data2)
*data2 = readl(base + APP_DATA2);
ret = 0;
} else {
ret = -EIO;
}
break;
}
writel(PCOM_CMD_IDLE, base + APP_COMMAND);
spin_unlock_irqrestore(&proc_comm_lock, flags);
return ret;
}
/*
* We need to wait for the ARM9 to at least partially boot
* up before we can continue. Since the ARM9 does resource
* allocation, if we dont' wait we could end up crashing or in
* and unknown state. This function should be called early to
* wait on the ARM9.
*/
void proc_comm_boot_wait(void)
{
void __iomem *base = MSM_SHARED_RAM_BASE;
proc_comm_wait_for(base + MDM_STATUS, PCOM_READY);
}

258
arch/arm/mach-msm/proc_comm.h
View File

@ -1,258 +0,0 @@
/* arch/arm/mach-msm/proc_comm.h
*
* Copyright (c) 2007 QUALCOMM Incorporated
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
#include <linux/init.h>
enum {
PCOM_CMD_IDLE = 0x0,
PCOM_CMD_DONE,
PCOM_RESET_APPS,
PCOM_RESET_CHIP,
PCOM_CONFIG_NAND_MPU,
PCOM_CONFIG_USB_CLKS,
PCOM_GET_POWER_ON_STATUS,
PCOM_GET_WAKE_UP_STATUS,
PCOM_GET_BATT_LEVEL,
PCOM_CHG_IS_CHARGING,
PCOM_POWER_DOWN,
PCOM_USB_PIN_CONFIG,
PCOM_USB_PIN_SEL,
PCOM_SET_RTC_ALARM,
PCOM_NV_READ,
PCOM_NV_WRITE,
PCOM_GET_UUID_HIGH,
PCOM_GET_UUID_LOW,
PCOM_GET_HW_ENTROPY,
PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
PCOM_CLKCTL_RPC_ENABLE,
PCOM_CLKCTL_RPC_DISABLE,
PCOM_CLKCTL_RPC_RESET,
PCOM_CLKCTL_RPC_SET_FLAGS,
PCOM_CLKCTL_RPC_SET_RATE,
PCOM_CLKCTL_RPC_MIN_RATE,
PCOM_CLKCTL_RPC_MAX_RATE,
PCOM_CLKCTL_RPC_RATE,
PCOM_CLKCTL_RPC_PLL_REQUEST,
PCOM_CLKCTL_RPC_ENABLED,
PCOM_VREG_SWITCH,
PCOM_VREG_SET_LEVEL,
PCOM_GPIO_TLMM_CONFIG_GROUP,
PCOM_GPIO_TLMM_UNCONFIG_GROUP,
PCOM_NV_WRITE_BYTES_4_7,
PCOM_CONFIG_DISP,
PCOM_GET_FTM_BOOT_COUNT,
PCOM_RPC_GPIO_TLMM_CONFIG_EX,
PCOM_PM_MPP_CONFIG,
PCOM_GPIO_IN,
PCOM_GPIO_OUT,
PCOM_RESET_MODEM,
PCOM_RESET_CHIP_IMM,
PCOM_PM_VID_EN,
PCOM_VREG_PULLDOWN,
PCOM_GET_MODEM_VERSION,
PCOM_CLK_REGIME_SEC_RESET,
PCOM_CLK_REGIME_SEC_RESET_ASSERT,
PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
PCOM_CLK_REGIME_SEC_ENABLE,
PCOM_CLK_REGIME_SEC_DISABLE,
PCOM_CLK_REGIME_SEC_IS_ON,
PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
PCOM_CLK_REGIME_SEC_SEL_SPEED,
PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
PCOM_CLK_REGIME_SEC_LCD_CTRL,
PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
PCOM_GPIO_CONFIG,
PCOM_GPIO_CONFIGURE_GROUP,
PCOM_GPIO_TLMM_SET_PORT,
PCOM_GPIO_TLMM_CONFIG_EX,
PCOM_SET_FTM_BOOT_COUNT,
PCOM_RESERVED0,
PCOM_RESERVED1,
PCOM_CUSTOMER_CMD1,
PCOM_CUSTOMER_CMD2,
PCOM_CUSTOMER_CMD3,
PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
PCOM_SET_SW_WATCHDOG_STATE,
PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
PCOM_PM_MPP_CONFIG_I_SINK,
PCOM_RESERVED_101,
PCOM_MSM_HSUSB_PHY_RESET,
PCOM_GET_BATT_MV_LEVEL,
PCOM_CHG_USB_IS_PC_CONNECTED,
PCOM_CHG_USB_IS_CHARGER_CONNECTED,
PCOM_CHG_USB_IS_DISCONNECTED,
PCOM_CHG_USB_IS_AVAILABLE,
PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
PCOM_CLKCTL_RPC_RESET_ASSERT,
PCOM_CLKCTL_RPC_RESET_DEASSERT,
PCOM_CLKCTL_RPC_RAIL_ON,
PCOM_CLKCTL_RPC_RAIL_OFF,
PCOM_CLKCTL_RPC_RAIL_ENABLE,
PCOM_CLKCTL_RPC_RAIL_DISABLE,
PCOM_CLKCTL_RPC_RAIL_CONTROL,
PCOM_CLKCTL_RPC_MIN_MSMC1,
PCOM_NUM_CMDS,
};
enum {
PCOM_INVALID_STATUS = 0x0,
PCOM_READY,
PCOM_CMD_RUNNING,
PCOM_CMD_SUCCESS,
PCOM_CMD_FAIL,
PCOM_CMD_FAIL_FALSE_RETURNED,
PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
PCOM_CMD_FAIL_CMD_UNREGISTERED,
PCOM_CMD_FAIL_CMD_LOCKED,
PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
PCOM_CMD_FAIL_BAD_DESTINATION,
PCOM_CMD_FAIL_SERVER_RESET,
PCOM_CMD_FAIL_SMSM_NOT_INIT,
PCOM_CMD_FAIL_PROC_COMM_BUSY,
PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
};
/* List of VREGs that support the Pull Down Resistor setting. */
enum vreg_pdown_id {
PM_VREG_PDOWN_MSMA_ID,
PM_VREG_PDOWN_MSMP_ID,
PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */
PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */
PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */
PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_TCXO_ID,
PM_VREG_PDOWN_PA_ID,
PM_VREG_PDOWN_RFTX_ID,
PM_VREG_PDOWN_RFRX1_ID,
PM_VREG_PDOWN_RFRX2_ID,
PM_VREG_PDOWN_SYNT_ID,
PM_VREG_PDOWN_WLAN_ID,
PM_VREG_PDOWN_USB_ID,
PM_VREG_PDOWN_MMC_ID,
PM_VREG_PDOWN_RUIM_ID,
PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */
PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_RF_ID,
PM_VREG_PDOWN_RF_VCO_ID,
PM_VREG_PDOWN_MPLL_ID,
PM_VREG_PDOWN_S2_ID,
PM_VREG_PDOWN_S3_ID,
PM_VREG_PDOWN_RFUBM_ID,
/* new for HAN */
PM_VREG_PDOWN_RF1_ID,
PM_VREG_PDOWN_RF2_ID,
PM_VREG_PDOWN_RFA_ID,
PM_VREG_PDOWN_CDC2_ID,
PM_VREG_PDOWN_RFTX2_ID,
PM_VREG_PDOWN_USIM_ID,
PM_VREG_PDOWN_USB2P6_ID,
PM_VREG_PDOWN_USB3P3_ID,
PM_VREG_PDOWN_INVALID_ID,
/* backward compatible enums only */
PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
};
enum {
PCOM_CLKRGM_APPS_RESET_USB_PHY = 34,
PCOM_CLKRGM_APPS_RESET_USBH = 37,
};
/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
#define GPIO_ENABLE 0
#define GPIO_DISABLE 1
#define GPIO_INPUT 0
#define GPIO_OUTPUT 1
#define GPIO_NO_PULL 0
#define GPIO_PULL_DOWN 1
#define GPIO_KEEPER 2
#define GPIO_PULL_UP 3
#define GPIO_2MA 0
#define GPIO_4MA 1
#define GPIO_6MA 2
#define GPIO_8MA 3
#define GPIO_10MA 4
#define GPIO_12MA 5
#define GPIO_14MA 6
#define GPIO_16MA 7
#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
((((gpio) & 0x3FF) << 4) | \
((func) & 0xf) | \
(((dir) & 0x1) << 14) | \
(((pull) & 0x3) << 15) | \
(((drvstr) & 0xF) << 17))
int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
void proc_comm_boot_wait(void);
#endif

172
arch/arm/mach-msm/sirc.c
View File

@ -1,172 +0,0 @@
/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
static unsigned int int_enable;
static unsigned int wake_enable;
static struct sirc_regs_t sirc_regs = {
.int_enable = SPSS_SIRC_INT_ENABLE,
.int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR,
.int_enable_set = SPSS_SIRC_INT_ENABLE_SET,
.int_type = SPSS_SIRC_INT_TYPE,
.int_polarity = SPSS_SIRC_INT_POLARITY,
.int_clear = SPSS_SIRC_INT_CLEAR,
};
static struct sirc_cascade_regs sirc_reg_table[] = {
{
.int_status = SPSS_SIRC_IRQ_STATUS,
.cascade_irq = INT_SIRC_0,
}
};
/* Mask off the given interrupt. Keep the int_enable mask in sync with
the enable reg, so it can be restored after power collapse. */
static void sirc_irq_mask(struct irq_data *d)
{
unsigned int mask;
mask = 1 << (d->irq - FIRST_SIRC_IRQ);
writel(mask, sirc_regs.int_enable_clear);
int_enable &= ~mask;
return;
}
/* Unmask the given interrupt. Keep the int_enable mask in sync with
the enable reg, so it can be restored after power collapse. */
static void sirc_irq_unmask(struct irq_data *d)
{
unsigned int mask;
mask = 1 << (d->irq - FIRST_SIRC_IRQ);
writel(mask, sirc_regs.int_enable_set);
int_enable |= mask;
return;
}
static void sirc_irq_ack(struct irq_data *d)
{
unsigned int mask;
mask = 1 << (d->irq - FIRST_SIRC_IRQ);
writel(mask, sirc_regs.int_clear);
return;
}
static int sirc_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned int mask;
/* Used to set the interrupt enable mask during power collapse. */
mask = 1 << (d->irq - FIRST_SIRC_IRQ);
if (on)
wake_enable |= mask;
else
wake_enable &= ~mask;
return 0;
}
static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
unsigned int mask;
unsigned int val;
mask = 1 << (d->irq - FIRST_SIRC_IRQ);
val = readl(sirc_regs.int_polarity);
if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING))
val |= mask;
else
val &= ~mask;
writel(val, sirc_regs.int_polarity);
val = readl(sirc_regs.int_type);
if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
val |= mask;
__irq_set_handler_locked(d->irq, handle_edge_irq);
} else {
val &= ~mask;
__irq_set_handler_locked(d->irq, handle_level_irq);
}
writel(val, sirc_regs.int_type);
return 0;
}
/* Finds the pending interrupt on the passed cascade irq and redrives it */
static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int reg = 0;
unsigned int sirq;
unsigned int status;
while ((reg < ARRAY_SIZE(sirc_reg_table)) &&
(sirc_reg_table[reg].cascade_irq != irq))
reg++;
status = readl(sirc_reg_table[reg].int_status);
status &= SIRC_MASK;
if (status == 0)
return;
for (sirq = 0;
(sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0);
sirq++)
;
generic_handle_irq(sirq+FIRST_SIRC_IRQ);
desc->irq_data.chip->irq_ack(&desc->irq_data);
}
static struct irq_chip sirc_irq_chip = {
.name = "sirc",
.irq_ack = sirc_irq_ack,
.irq_mask = sirc_irq_mask,
.irq_unmask = sirc_irq_unmask,
.irq_set_wake = sirc_irq_set_wake,
.irq_set_type = sirc_irq_set_type,
};
void __init msm_init_sirc(void)
{
int i;
int_enable = 0;
wake_enable = 0;
for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) {
irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq);
set_irq_flags(i, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) {
irq_set_chained_handler(sirc_reg_table[i].cascade_irq,
sirc_irq_handler);
irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1);
}
return;
}

1034
arch/arm/mach-msm/smd.c
View File

File diff suppressed because it is too large Load Diff

311
arch/arm/mach-msm/smd_debug.c
View File

@ -1,311 +0,0 @@
/* arch/arm/mach-msm/smd_debug.c
*
* Copyright (C) 2007 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/debugfs.h>
#include <linux/list.h>
#include <mach/msm_iomap.h>
#include "smd_private.h"
#if defined(CONFIG_DEBUG_FS)
static char *chstate(unsigned n)
{
switch (n) {
case SMD_SS_CLOSED:
return "CLOSED";
case SMD_SS_OPENING:
return "OPENING";
case SMD_SS_OPENED:
return "OPENED";
case SMD_SS_FLUSHING:
return "FLUSHING";
case SMD_SS_CLOSING:
return "CLOSING";
case SMD_SS_RESET:
return "RESET";
case SMD_SS_RESET_OPENING:
return "ROPENING";
default:
return "UNKNOWN";
}
}
static int dump_ch(char *buf, int max, struct smd_channel *ch)
{
volatile struct smd_half_channel *s = ch->send;
volatile struct smd_half_channel *r = ch->recv;
return scnprintf(
buf, max,
"ch%02d:"
" %8s(%05d/%05d) %c%c%c%c%c%c%c <->"
" %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n,
chstate(s->state), s->tail, s->head,
s->fDSR ? 'D' : 'd',
s->fCTS ? 'C' : 'c',
s->fCD ? 'C' : 'c',
s->fRI ? 'I' : 'i',
s->fHEAD ? 'W' : 'w',
s->fTAIL ? 'R' : 'r',
s->fSTATE ? 'S' : 's',
chstate(r->state), r->tail, r->head,
r->fDSR ? 'D' : 'd',
r->fCTS ? 'R' : 'r',
r->fCD ? 'C' : 'c',
r->fRI ? 'I' : 'i',
r->fHEAD ? 'W' : 'w',
r->fTAIL ? 'R' : 'r',
r->fSTATE ? 'S' : 's',
ch->name
);
}
static int debug_read_stat(char *buf, int max)
{
char *msg;
int i = 0;
msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
i += scnprintf(buf + i, max - i,
"smsm: ARM9 HAS CRASHED\n");
i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n",
raw_smsm_get_state(SMSM_STATE_MODEM),
raw_smsm_get_state(SMSM_STATE_APPS));
#ifdef CONFIG_ARCH_MSM_SCORPION
i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x "
"qdsp6: %08x power: %08x time: %08x\n",
raw_smsm_get_state(SMSM_STATE_APPS_DEM),
raw_smsm_get_state(SMSM_STATE_MODEM_DEM),
raw_smsm_get_state(SMSM_STATE_QDSP6_DEM),
raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM),
raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM));
#endif
if (msg) {
msg[SZ_DIAG_ERR_MSG - 1] = 0;
i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg);
}
return i;
}
static int debug_read_mem(char *buf, int max)
{
unsigned n;
struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
struct smem_heap_entry *toc = shared->heap_toc;
int i = 0;
i += scnprintf(buf + i, max - i,
"heap: init=%d free=%d remain=%d\n",
shared->heap_info.initialized,
shared->heap_info.free_offset,
shared->heap_info.heap_remaining);
for (n = 0; n < SMEM_NUM_ITEMS; n++) {
if (toc[n].allocated == 0)
continue;
i += scnprintf(buf + i, max - i,
"%04d: offset %08x size %08x\n",
n, toc[n].offset, toc[n].size);
}
return i;
}
static int debug_read_ch(char *buf, int max)
{
struct smd_channel *ch;
unsigned long flags;
int i = 0;
spin_lock_irqsave(&smd_lock, flags);
list_for_each_entry(ch, &smd_ch_list_dsp, ch_list)
i += dump_ch(buf + i, max - i, ch);
list_for_each_entry(ch, &smd_ch_list_modem, ch_list)
i += dump_ch(buf + i, max - i, ch);
list_for_each_entry(ch, &smd_ch_closed_list, ch_list)
i += dump_ch(buf + i, max - i, ch);
spin_unlock_irqrestore(&smd_lock, flags);
return i;
}
static int debug_read_version(char *buf, int max)
{
struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
unsigned version = shared->version[VERSION_MODEM];
return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff);
}
static int debug_read_build_id(char *buf, int max)
{
unsigned size;
void *data;
data = smem_item(SMEM_HW_SW_BUILD_ID, &size);
if (!data)
return 0;
if (size >= max)
size = max;
memcpy(buf, data, size);
return size;
}
static int debug_read_alloc_tbl(char *buf, int max)
{
struct smd_alloc_elm *shared;
int n, i = 0;
shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
for (n = 0; n < 64; n++) {
if (shared[n].ref_count == 0)
continue;
i += scnprintf(buf + i, max - i,
"%03d: %-20s cid=%02d type=%03d "
"kind=%02d ref_count=%d\n",
n, shared[n].name, shared[n].cid,
shared[n].ctype & 0xff,
(shared[n].ctype >> 8) & 0xf,
shared[n].ref_count);
}
return i;
}
#define DEBUG_BUFMAX 4096
static char debug_buffer[DEBUG_BUFMAX];
static ssize_t debug_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
int (*fill)(char *buf, int max) = file->private_data;
int bsize = fill(debug_buffer, DEBUG_BUFMAX);
return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
}
static const struct file_operations debug_ops = {
.read = debug_read,
.open = simple_open,
.llseek = default_llseek,
};
static void debug_create(const char *name, umode_t mode,
struct dentry *dent,
int (*fill)(char *buf, int max))
{
debugfs_create_file(name, mode, dent, fill, &debug_ops);
}
int __init smd_debugfs_init(void)
{
struct dentry *dent;
dent = debugfs_create_dir("smd", 0);
if (IS_ERR(dent))
return 1;
debug_create("ch", 0444, dent, debug_read_ch);
debug_create("stat", 0444, dent, debug_read_stat);
debug_create("mem", 0444, dent, debug_read_mem);
debug_create("version", 0444, dent, debug_read_version);
debug_create("tbl", 0444, dent, debug_read_alloc_tbl);
debug_create("build", 0444, dent, debug_read_build_id);
return 0;
}
#endif
#define MAX_NUM_SLEEP_CLIENTS 64
#define MAX_SLEEP_NAME_LEN 8
#define NUM_GPIO_INT_REGISTERS 6
#define GPIO_SMEM_NUM_GROUPS 2
#define GPIO_SMEM_MAX_PC_INTERRUPTS 8
struct tramp_gpio_save {
unsigned int enable;
unsigned int detect;
unsigned int polarity;
};
struct tramp_gpio_smem {
uint16_t num_fired[GPIO_SMEM_NUM_GROUPS];
uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS];
uint32_t enabled[NUM_GPIO_INT_REGISTERS];
uint32_t detection[NUM_GPIO_INT_REGISTERS];
uint32_t polarity[NUM_GPIO_INT_REGISTERS];
};
void smsm_print_sleep_info(void)
{
unsigned long flags;
uint32_t *ptr;
#ifndef CONFIG_ARCH_MSM_SCORPION
struct tramp_gpio_smem *gpio;
struct smsm_interrupt_info *int_info;
#endif
spin_lock_irqsave(&smem_lock, flags);
ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
if (ptr)
pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr);
ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr));
if (ptr)
pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr);
ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr));
if (ptr)
pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr);
#ifndef CONFIG_ARCH_MSM_SCORPION
int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info));
if (int_info)
pr_info("SMEM_SMSM_INT_INFO %x %x %x\n",
int_info->interrupt_mask,
int_info->pending_interrupts,
int_info->wakeup_reason);
gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio));
if (gpio) {
int i;
for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++)
pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n",
i, gpio->enabled[i], gpio->detection[i],
gpio->polarity[i]);
for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++)
pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n",
i, gpio->num_fired[i], gpio->fired[i][0],
gpio->fired[i][1]);
}
#else
#endif
spin_unlock_irqrestore(&smem_lock, flags);
}

403
arch/arm/mach-msm/smd_private.h
View File

@ -1,403 +0,0 @@
/* arch/arm/mach-msm/smd_private.h
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007 QUALCOMM Incorporated
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/io.h>
#include <mach/msm_iomap.h>
struct smem_heap_info {
unsigned initialized;
unsigned free_offset;
unsigned heap_remaining;
unsigned reserved;
};
struct smem_heap_entry {
unsigned allocated;
unsigned offset;
unsigned size;
unsigned reserved;
};
struct smem_proc_comm {
unsigned command;
unsigned status;
unsigned data1;
unsigned data2;
};
#define PC_APPS 0
#define PC_MODEM 1
#define VERSION_SMD 0
#define VERSION_QDSP6 4
#define VERSION_APPS_SBL 6
#define VERSION_MODEM_SBL 7
#define VERSION_APPS 8
#define VERSION_MODEM 9
struct smem_shared {
struct smem_proc_comm proc_comm[4];
unsigned version[32];
struct smem_heap_info heap_info;
struct smem_heap_entry heap_toc[512];
};
#define SMSM_V1_SIZE (sizeof(unsigned) * 8)
#define SMSM_V2_SIZE (sizeof(unsigned) * 4)
#ifdef CONFIG_MSM_SMD_PKG3
struct smsm_interrupt_info {
uint32_t interrupt_mask;
uint32_t pending_interrupts;
uint32_t wakeup_reason;
};
#else
#define DEM_MAX_PORT_NAME_LEN (20)
struct msm_dem_slave_data {
uint32_t sleep_time;
uint32_t interrupt_mask;
uint32_t resources_used;
uint32_t reserved1;
uint32_t wakeup_reason;
uint32_t pending_interrupts;
uint32_t rpc_prog;
uint32_t rpc_proc;
char smd_port_name[DEM_MAX_PORT_NAME_LEN];
uint32_t reserved2;
};
#endif
#define SZ_DIAG_ERR_MSG 0xC8
#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE
#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID
#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE
#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL
#define SMSM_INIT 0x00000001
#define SMSM_SMDINIT 0x00000008
#define SMSM_RPCINIT 0x00000020
#define SMSM_RESET 0x00000040
#define SMSM_RSA 0x00000080
#define SMSM_RUN 0x00000100
#define SMSM_PWRC 0x00000200
#define SMSM_TIMEWAIT 0x00000400
#define SMSM_TIMEINIT 0x00000800
#define SMSM_PWRC_EARLY_EXIT 0x00001000
#define SMSM_WFPI 0x00002000
#define SMSM_SLEEP 0x00004000
#define SMSM_SLEEPEXIT 0x00008000
#define SMSM_APPS_REBOOT 0x00020000
#define SMSM_SYSTEM_POWER_DOWN 0x00040000
#define SMSM_SYSTEM_REBOOT 0x00080000
#define SMSM_SYSTEM_DOWNLOAD 0x00100000
#define SMSM_PWRC_SUSPEND 0x00200000
#define SMSM_APPS_SHUTDOWN 0x00400000
#define SMSM_SMD_LOOPBACK 0x00800000
#define SMSM_RUN_QUIET 0x01000000
#define SMSM_MODEM_WAIT 0x02000000
#define SMSM_MODEM_BREAK 0x04000000
#define SMSM_MODEM_CONTINUE 0x08000000
#define SMSM_UNKNOWN 0x80000000
#define SMSM_WKUP_REASON_RPC 0x00000001
#define SMSM_WKUP_REASON_INT 0x00000002
#define SMSM_WKUP_REASON_GPIO 0x00000004
#define SMSM_WKUP_REASON_TIMER 0x00000008
#define SMSM_WKUP_REASON_ALARM 0x00000010
#define SMSM_WKUP_REASON_RESET 0x00000020
#ifdef CONFIG_ARCH_MSM7X00A
enum smsm_state_item {
SMSM_STATE_APPS = 1,
SMSM_STATE_MODEM = 3,
SMSM_STATE_COUNT,
};
#else
enum smsm_state_item {
SMSM_STATE_APPS,
SMSM_STATE_MODEM,
SMSM_STATE_HEXAGON,
SMSM_STATE_APPS_DEM,
SMSM_STATE_MODEM_DEM,
SMSM_STATE_QDSP6_DEM,
SMSM_STATE_POWER_MASTER_DEM,
SMSM_STATE_TIME_MASTER_DEM,
SMSM_STATE_COUNT,
};
#endif
void *smem_alloc(unsigned id, unsigned size);
int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask);
uint32_t smsm_get_state(enum smsm_state_item item);
int smsm_set_sleep_duration(uint32_t delay);
void smsm_print_sleep_info(void);
#define SMEM_NUM_SMD_CHANNELS 64
typedef enum {
/* fixed items */
SMEM_PROC_COMM = 0,
SMEM_HEAP_INFO,
SMEM_ALLOCATION_TABLE,
SMEM_VERSION_INFO,
SMEM_HW_RESET_DETECT,
SMEM_AARM_WARM_BOOT,
SMEM_DIAG_ERR_MESSAGE,
SMEM_SPINLOCK_ARRAY,
SMEM_MEMORY_BARRIER_LOCATION,
/* dynamic items */
SMEM_AARM_PARTITION_TABLE,
SMEM_AARM_BAD_BLOCK_TABLE,
SMEM_RESERVE_BAD_BLOCKS,
SMEM_WM_UUID,
SMEM_CHANNEL_ALLOC_TBL,
SMEM_SMD_BASE_ID,
SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS,
SMEM_SMEM_LOG_EVENTS,
SMEM_SMEM_STATIC_LOG_IDX,
SMEM_SMEM_STATIC_LOG_EVENTS,
SMEM_SMEM_SLOW_CLOCK_SYNC,
SMEM_SMEM_SLOW_CLOCK_VALUE,
SMEM_BIO_LED_BUF,
SMEM_SMSM_SHARED_STATE,
SMEM_SMSM_INT_INFO,
SMEM_SMSM_SLEEP_DELAY,
SMEM_SMSM_LIMIT_SLEEP,
SMEM_SLEEP_POWER_COLLAPSE_DISABLED,
SMEM_KEYPAD_KEYS_PRESSED,
SMEM_KEYPAD_STATE_UPDATED,
SMEM_KEYPAD_STATE_IDX,
SMEM_GPIO_INT,
SMEM_MDDI_LCD_IDX,
SMEM_MDDI_HOST_DRIVER_STATE,
SMEM_MDDI_LCD_DISP_STATE,
SMEM_LCD_CUR_PANEL,
SMEM_MARM_BOOT_SEGMENT_INFO,
SMEM_AARM_BOOT_SEGMENT_INFO,
SMEM_SLEEP_STATIC,
SMEM_SCORPION_FREQUENCY,
SMEM_SMD_PROFILES,
SMEM_TSSC_BUSY,
SMEM_HS_SUSPEND_FILTER_INFO,
SMEM_BATT_INFO,
SMEM_APPS_BOOT_MODE,
SMEM_VERSION_FIRST,
SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24,
SMEM_OSS_RRCASN1_BUF1,
SMEM_OSS_RRCASN1_BUF2,
SMEM_ID_VENDOR0,
SMEM_ID_VENDOR1,
SMEM_ID_VENDOR2,
SMEM_HW_SW_BUILD_ID,
SMEM_SMD_BLOCK_PORT_BASE_ID,
SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS,
SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS,
SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS,
SMEM_SCLK_CONVERSION,
SMEM_SMD_SMSM_INTR_MUX,
SMEM_SMSM_CPU_INTR_MASK,
SMEM_APPS_DEM_SLAVE_DATA,
SMEM_QDSP6_DEM_SLAVE_DATA,
SMEM_CLKREGIM_BSP,
SMEM_CLKREGIM_SOURCES,
SMEM_SMD_FIFO_BASE_ID,
SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS,
SMEM_POWER_ON_STATUS_INFO,
SMEM_DAL_AREA,
SMEM_SMEM_LOG_POWER_IDX,
SMEM_SMEM_LOG_POWER_WRAP,
SMEM_SMEM_LOG_POWER_EVENTS,
SMEM_ERR_CRASH_LOG,
SMEM_ERR_F3_TRACE_LOG,
SMEM_NUM_ITEMS,
} smem_mem_type;
#define SMD_SS_CLOSED 0x00000000
#define SMD_SS_OPENING 0x00000001
#define SMD_SS_OPENED 0x00000002
#define SMD_SS_FLUSHING 0x00000003
#define SMD_SS_CLOSING 0x00000004
#define SMD_SS_RESET 0x00000005
#define SMD_SS_RESET_OPENING 0x00000006
#define SMD_BUF_SIZE 8192
#define SMD_CHANNELS 64
#define SMD_HEADER_SIZE 20
struct smd_alloc_elm {
char name[20];
uint32_t cid;
uint32_t ctype;
uint32_t ref_count;
};
struct smd_half_channel {
unsigned state;
unsigned char fDSR;
unsigned char fCTS;
unsigned char fCD;
unsigned char fRI;
unsigned char fHEAD;
unsigned char fTAIL;
unsigned char fSTATE;
unsigned char fUNUSED;
unsigned tail;
unsigned head;
} __attribute__(( aligned(4), packed ));
/* Only used on SMD package v3 on msm7201a */
struct smd_shared_v1 {
struct smd_half_channel ch0;
unsigned char data0[SMD_BUF_SIZE];
struct smd_half_channel ch1;
unsigned char data1[SMD_BUF_SIZE];
};
/* Used on SMD package v4 */
struct smd_shared_v2 {
struct smd_half_channel ch0;
struct smd_half_channel ch1;
};
struct smd_channel {
volatile struct smd_half_channel *send;
volatile struct smd_half_channel *recv;
unsigned char *send_data;
unsigned char *recv_data;
unsigned fifo_mask;
unsigned fifo_size;
unsigned current_packet;
unsigned n;
struct list_head ch_list;
void *priv;
void (*notify)(void *priv, unsigned flags);
int (*read)(struct smd_channel *ch, void *data, int len);
int (*write)(struct smd_channel *ch, const void *data, int len);
int (*read_avail)(struct smd_channel *ch);
int (*write_avail)(struct smd_channel *ch);
void (*update_state)(struct smd_channel *ch);
unsigned last_state;
void (*notify_other_cpu)(void);
unsigned type;
char name[32];
struct platform_device pdev;
};
#define SMD_TYPE_MASK 0x0FF
#define SMD_TYPE_APPS_MODEM 0x000
#define SMD_TYPE_APPS_DSP 0x001
#define SMD_TYPE_MODEM_DSP 0x002
#define SMD_KIND_MASK 0xF00
#define SMD_KIND_UNKNOWN 0x000
#define SMD_KIND_STREAM 0x100
#define SMD_KIND_PACKET 0x200
extern struct list_head smd_ch_closed_list;
extern struct list_head smd_ch_list_modem;
extern struct list_head smd_ch_list_dsp;
extern spinlock_t smd_lock;
extern spinlock_t smem_lock;
void *smem_find(unsigned id, unsigned size);
void *smem_item(unsigned id, unsigned *size);
uint32_t raw_smsm_get_state(enum smsm_state_item item);
extern void msm_init_last_radio_log(struct module *);
#ifdef CONFIG_MSM_SMD_PKG3
/*
* This allocator assumes an SMD Package v3 which only exists on
* MSM7x00 SoC's.
*/
static inline int _smd_alloc_channel(struct smd_channel *ch)
{
struct smd_shared_v1 *shared1;
shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
if (!shared1) {
pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
return -1;
}
ch->send = &shared1->ch0;
ch->recv = &shared1->ch1;
ch->send_data = shared1->data0;
ch->recv_data = shared1->data1;
ch->fifo_size = SMD_BUF_SIZE;
return 0;
}
#else
/*
* This allocator assumes an SMD Package v4, the most common
* and the default.
*/
static inline int _smd_alloc_channel(struct smd_channel *ch)
{
struct smd_shared_v2 *shared2;
void *buffer;
unsigned buffer_sz;
shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
if (!buffer)
return -1;
/* buffer must be a power-of-two size */
if (buffer_sz & (buffer_sz - 1))
return -1;
buffer_sz /= 2;
ch->send = &shared2->ch0;
ch->recv = &shared2->ch1;
ch->send_data = buffer;
ch->recv_data = buffer + buffer_sz;
ch->fifo_size = buffer_sz;
return 0;
}
#endif /* CONFIG_MSM_SMD_PKG3 */
#if defined(CONFIG_ARCH_MSM7X30)
static inline void msm_a2m_int(uint32_t irq)
{
writel(1 << irq, MSM_GCC_BASE + 0x8);
}
#else
static inline void msm_a2m_int(uint32_t irq)
{
writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
}
#endif /* CONFIG_ARCH_MSM7X30 */
#endif

220
arch/arm/mach-msm/vreg.c
View File

@ -1,220 +0,0 @@
/* arch/arm/mach-msm/vreg.c
*
* Copyright (C) 2008 Google, Inc.
* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/module.h>
#include <linux/string.h>
#include <mach/vreg.h>
#include "proc_comm.h"
struct vreg {
const char *name;
unsigned id;
int status;
unsigned refcnt;
};
#define VREG(_name, _id, _status, _refcnt) \
{ .name = _name, .id = _id, .status = _status, .refcnt = _refcnt }
static struct vreg vregs[] = {
VREG("msma", 0, 0, 0),
VREG("msmp", 1, 0, 0),
VREG("msme1", 2, 0, 0),
VREG("msmc1", 3, 0, 0),
VREG("msmc2", 4, 0, 0),
VREG("gp3", 5, 0, 0),
VREG("msme2", 6, 0, 0),
VREG("gp4", 7, 0, 0),
VREG("gp1", 8, 0, 0),
VREG("tcxo", 9, 0, 0),
VREG("pa", 10, 0, 0),
VREG("rftx", 11, 0, 0),
VREG("rfrx1", 12, 0, 0),
VREG("rfrx2", 13, 0, 0),
VREG("synt", 14, 0, 0),
VREG("wlan", 15, 0, 0),
VREG("usb", 16, 0, 0),
VREG("boost", 17, 0, 0),
VREG("mmc", 18, 0, 0),
VREG("ruim", 19, 0, 0),
VREG("msmc0", 20, 0, 0),
VREG("gp2", 21, 0, 0),
VREG("gp5", 22, 0, 0),
VREG("gp6", 23, 0, 0),
VREG("rf", 24, 0, 0),
VREG("rf_vco", 26, 0, 0),
VREG("mpll", 27, 0, 0),
VREG("s2", 28, 0, 0),
VREG("s3", 29, 0, 0),
VREG("rfubm", 30, 0, 0),
VREG("ncp", 31, 0, 0),
VREG("gp7", 32, 0, 0),
VREG("gp8", 33, 0, 0),
VREG("gp9", 34, 0, 0),
VREG("gp10", 35, 0, 0),
VREG("gp11", 36, 0, 0),
VREG("gp12", 37, 0, 0),
VREG("gp13", 38, 0, 0),
VREG("gp14", 39, 0, 0),
VREG("gp15", 40, 0, 0),
VREG("gp16", 41, 0, 0),
VREG("gp17", 42, 0, 0),
VREG("s4", 43, 0, 0),
VREG("usb2", 44, 0, 0),
VREG("wlan2", 45, 0, 0),
VREG("xo_out", 46, 0, 0),
VREG("lvsw0", 47, 0, 0),
VREG("lvsw1", 48, 0, 0),
};
struct vreg *vreg_get(struct device *dev, const char *id)
{
int n;
for (n = 0; n < ARRAY_SIZE(vregs); n++) {
if (!strcmp(vregs[n].name, id))
return vregs + n;
}
return ERR_PTR(-ENOENT);
}
void vreg_put(struct vreg *vreg)
{
}
int vreg_enable(struct vreg *vreg)
{
unsigned id = vreg->id;
unsigned enable = 1;
if (vreg->refcnt == 0)
vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
if ((vreg->refcnt < UINT_MAX) && (!vreg->status))
vreg->refcnt++;
return vreg->status;
}
int vreg_disable(struct vreg *vreg)
{
unsigned id = vreg->id;
unsigned enable = 0;
if (!vreg->refcnt)
return 0;
if (vreg->refcnt == 1)
vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
if (!vreg->status)
vreg->refcnt--;
return vreg->status;
}
int vreg_set_level(struct vreg *vreg, unsigned mv)
{
unsigned id = vreg->id;
vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
return vreg->status;
}
#if defined(CONFIG_DEBUG_FS)
static int vreg_debug_set(void *data, u64 val)
{
struct vreg *vreg = data;
switch (val) {
case 0:
vreg_disable(vreg);
break;
case 1:
vreg_enable(vreg);
break;
default:
vreg_set_level(vreg, val);
break;
}
return 0;
}
static int vreg_debug_get(void *data, u64 *val)
{
struct vreg *vreg = data;
if (!vreg->status)
*val = 0;
else
*val = 1;
return 0;
}
static int vreg_debug_count_set(void *data, u64 val)
{
struct vreg *vreg = data;
if (val > UINT_MAX)
val = UINT_MAX;
vreg->refcnt = val;
return 0;
}
static int vreg_debug_count_get(void *data, u64 *val)
{
struct vreg *vreg = data;
*val = vreg->refcnt;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get,
vreg_debug_count_set, "%llu\n");
static int __init vreg_debug_init(void)
{
struct dentry *dent;
int n;
char name[32];
const char *refcnt_name = "_refcnt";
dent = debugfs_create_dir("vreg", 0);
if (IS_ERR(dent))
return 0;
for (n = 0; n < ARRAY_SIZE(vregs); n++) {
(void) debugfs_create_file(vregs[n].name, 0644,
dent, vregs + n, &vreg_fops);
strlcpy(name, vregs[n].name, sizeof(name));
strlcat(name, refcnt_name, sizeof(name));
(void) debugfs_create_file(name, 0644,
dent, vregs + n, &vreg_count_fops);
}
return 0;
}
device_initcall(vreg_debug_init);
#endif