redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Allwinner DT changes for 4.15 

The most notable changes are:
   - Conversion to the last SoC (A10, A20) to the new clock framework
   - HDMI and dual pipeline support for the A10, A20 and A31 DRM driver
   - Support for the various power supplies on a number of boards
   - Fix of DTC warnings on a number of SoCs, but most of them still need
     some work
   - New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry,
     Banana Pi M2 Ultra
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZ6avvAAoJEBx+YmzsjxAgQ9MP/RvW5lGwVg8Y6aIEr8pGBNCO
 pNiQkBToR5HQnCPTBzNfspoaR8w/8H344AGS56+tzjFIF1P2cawzOxEn1oUrOcbM
 mAuSUzekpBoKbad2vXsL6uwY2qo3fv62+I72edZkQ4tSEGLK6ISA49sKzhIfFP/2
 7K92nP9xodKfMu/pn74/jxzSqcOKXDRSsj1Eyht5KL0oiSmwPgZfCFz+ITE5lozt
 mzh19qTdxabXZZ4CxVRCBPz/+p6+lmbnIgh8anjcL0YgLN96B1rly3bqAvAmgw7H
 Bv6nxRhNlEGwvQasgHiSQM7AaVONfPK6WUdDI5Wrpch7de4aFt/Bpz676zeDWWUt
 dH3Nix8z4AAIma1Yw5CM3fJaPY7vKiL8TlWmSzu2Gc+fb1jGIVf/yvDlV9Gu3g6I
 JE6YoQmUDC3Sw2q2fvrCokjGTr24u6Er+mBt7u0qGmv7dx70jTBIosXsGwfcwtj2
 iKGCjbfRU6rzui+YGEgktCz6m8LIdm5T2BkS93hgfVWJPL7oxmDd+rRon2N196ni
 JhM8ieTHrow7Mb365FK66Xa4KK8emhLhH7wubo2l9x5uIfr4iu61gv0rOhAppoCC
 Cop3YyHk1H7SlSUP0tbN2pc36x2wMoPDfAy1MsZNzuD3VXVd//wf9z1c07oL22XA
 TXkVd4c39WYRx6MZlQ7+
 =HjP6
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner DT changes for 4.15" from Maxime Ripard:

The most notable changes are:
  - Conversion to the last SoC (A10, A20) to the new clock framework
  - HDMI and dual pipeline support for the A10, A20 and A31 DRM driver
  - Support for the various power supplies on a number of boards
  - Fix of DTC warnings on a number of SoCs, but most of them still need
    some work
  - New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry,
    Banana Pi M2 Ultra
  - New R40 SoC support

* tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (63 commits)
  ARM: sun8i: r40: enable USB host for Banana Pi M2 Ultra
  ARM: sun8i: v40: add 5V regulator for Banana Pi M2 Berry
  ARM: sun8i: r40: add 5V regulator for Banana Pi M2 Ultra
  ARM: sun8i: r40: add USB host port nodes for R40
  ARM: dts: sun4i: Enable HDMI support on some A10 devices
  ARM: dts: sun7i: Enable HDMI support on some A20 devices
  ARM: dts: sun7i: Add device nodes for display pipelines
  ARM: dts: sun4i: Add device nodes for display pipelines
  ARM: dts: sun8i: r40: add watchdog device node
  ARM: dts: sun5i: reference-design-tablet: Enable AXP209 AC and battery
  ARM: dts: sun9i: Change node names to remove underscores
  ARM: dts: sun9i: Change node names to remove underscores
  ARM: dts: sun4i: Remove underscores from nodes names
  ARM: dts: sun4i: Provide default muxing for relevant controllers
  ARM: dts: sun4i: Change pinctrl nodes to avoid warning
  ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices
  ARM: dts: sun6i: Add device node for HDMI controller
  ARM: dts: sun4i: Change LRADC node names to avoid warnings
  ARM: dts: sun4i: Remove skeleton and memory to avoid warnings
  ARM: dts: sun4i: Remove gpio-keys warnings
  ...
hifive-unleashed-5.1
Arnd Bergmann 2017-10-30 11:46:58 +01:00
parent 092283190a 1357bdb21f
commit c0dec1ec33
59 changed files with 2682 additions and 1831 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -331,6 +331,7 @@ swir Sierra Wireless
syna Synaptics Inc.
synology Synology, Inc.
tbs TBS Technologies
tbs-biometrics Touchless Biometric Systems AG
tcg Trusted Computing Group
tcl Toby Churchill Ltd.
technexion TechNexion

6
arch/arm/boot/dts/Makefile
View File

@ -895,6 +895,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-olinuxino-micro-emmc.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
@ -920,6 +921,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-a83t-tbs-a711.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-beelink-x2.dtb \
@ -936,8 +938,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb \
sun8i-v3s-licheepi-zero-dock.dtb
sun8i-v3s-licheepi-zero-dock.dtb \
sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb

2
arch/arm/boot/dts/axp209.dtsi
View File

@ -107,7 +107,7 @@
};
};
usb_power_supply: usb_power_supply {
usb_power_supply: usb-power-supply {
compatible = "x-powers,axp202-usb-power-supply";
status = "disabled";
};

28
arch/arm/boot/dts/sun4i-a10-a1000.dts
View File

@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_a1000>;
red {
label = "a1000:red:usr";
@ -79,8 +77,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&emac_power_pin_a1000>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -129,8 +125,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -140,8 +134,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -156,7 +148,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -170,8 +162,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -187,18 +177,6 @@
status = "okay";
};
&pio {
emac_power_pin_a1000: emac_power_pin@0 {
pins = "PH15";
function = "gpio_out";
};
led_pins_a1000: led_pins@0 {
pins = "PH10", "PH20";
function = "gpio_out";
};
};
#include "axp209.dtsi"
&reg_dcdc2 {
@ -236,13 +214,13 @@
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>;
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

16
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
View File

@ -68,8 +68,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -79,8 +77,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -95,7 +91,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -108,8 +104,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -125,12 +119,6 @@
status = "okay";
};
&pio {
usb2_vbus_pin_a: usb2_vbus_pin@0 {
pins = "PH12";
};
};
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
@ -147,7 +135,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

20
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
View File

@ -65,8 +65,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -80,14 +78,10 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5306de4: touchscreen@38 {
@ -104,21 +98,21 @@
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@800 {
button-800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
button-1000 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;
@ -127,8 +121,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -141,13 +133,13 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -164,7 +156,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

45
arch/arm/boot/dts/sun4i-a10-cubieboard.dts
View File

@ -59,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -90,6 +101,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -99,8 +114,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -109,9 +122,17 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -121,14 +142,12 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -141,8 +160,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -163,13 +180,13 @@
};
&pio {
led_pins_cubieboard: led_pins@0 {
led_pins_cubieboard: led-pins {
pins = "PH20", "PH21";
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@ -221,14 +238,14 @@
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

50
arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
View File

@ -58,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_dsrv9703c>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@ -77,10 +75,8 @@
max-microvolt = <3000000>;
};
reg_motor: reg_motor {
reg_motor: reg-motor {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&motor_pins>;
regulator-name = "vcc-motor";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@ -90,8 +86,6 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@ -105,8 +99,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -118,15 +110,11 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@ -134,8 +122,6 @@
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <768>;
@ -146,14 +132,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@400 {
button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
button@800 {
button-800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
@ -162,8 +148,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -176,33 +160,13 @@
};
&pio {
bl_en_pin_dsrv9703c: bl_en_pin@0 {
pins = "PH7";
function = "gpio_out";
};
codec_pa_pin: codec_pa_pin@0 {
pins = "PH15";
function = "gpio_out";
};
motor_pins: motor_pins@0 {
pins = "PB3";
function = "gpio_out";
};
touchscreen_pins: touchscreen_pins@0 {
pins = "PB13";
function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -211,7 +175,7 @@
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@ -250,7 +214,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

23
arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
View File

@ -72,8 +72,6 @@
*/
&codec {
/* PH15 controls power to external amplifier (ft2012q) */
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -91,8 +89,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -104,8 +100,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@ -122,21 +116,21 @@
status = "okay";
button@158 {
button-158 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <158730>;
};
button@349 {
button-349 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <349206>;
};
button@1142 {
button-1142 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@ -145,8 +139,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
@ -154,13 +146,6 @@
status = "okay";
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
pins = "PH15";
function = "gpio_out";
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@ -197,7 +182,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

24
arch/arm/boot/dts/sun4i-a10-hackberry.dts
View File

@ -80,8 +80,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy0>;
status = "okay";
};
@ -92,7 +90,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -106,8 +104,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -123,27 +119,11 @@
status = "okay";
};
&pio {
pinctrl-names = "default";
pinctrl-0 = <&hackberry_hogs>;
hackberry_hogs: hogs@0 {
pins = "PH19";
function = "gpio_out";
};
usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
pins = "PH12";
function = "gpio_out";
};
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
pinctrl-0 = <&usb2_vbus_pin_hackberry>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -156,6 +136,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

10
arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
View File

@ -63,8 +63,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -78,8 +76,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -92,13 +88,13 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -116,7 +112,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

36
arch/arm/boot/dts/sun4i-a10-inet1.dts
View File

@ -58,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_inet>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@ -88,8 +86,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -101,8 +97,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@ -115,8 +109,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5x: touchscreen@38 {
@ -124,8 +116,6 @@
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_wake_pin>;
wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
touchscreen-size-x = <600>;
touchscreen-size-y = <1024>;
@ -137,21 +127,21 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@1000 {
button-1000 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@ -160,8 +150,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -178,23 +166,13 @@
};
&pio {
bl_en_pin_inet: bl_en_pin@0 {
pins = "PH7";
function = "gpio_out";
};
touchscreen_wake_pin: touchscreen_wake_pin@0 {
pins = "PB13";
function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -203,7 +181,7 @@
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@ -246,7 +224,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

24
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
View File

@ -72,8 +72,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -85,14 +83,10 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@ -109,35 +103,35 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
button@600 {
button-600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
button@800 {
button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@ -146,8 +140,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -160,13 +152,13 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -208,7 +200,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

68
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
View File

@ -59,7 +59,7 @@
stdout-path = "serial0:115200n8";
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_inet9f>;
@ -67,7 +67,7 @@
#size-cells = <0>;
poll-interval = <20>;
button@0 {
left-joystick-left {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@ -75,7 +75,7 @@
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
};
button@1 {
left-joystick-right {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@ -83,7 +83,7 @@
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
};
button@2 {
left-joystick-up {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@ -91,7 +91,7 @@
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
};
button@3 {
left-joystick-down {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@ -99,7 +99,7 @@
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
};
button@4 {
right-joystick-left {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@ -107,7 +107,7 @@
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
};
button@5 {
right-joystick-right {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@ -115,7 +115,7 @@
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
};
button@6 {
right-joystick-up {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@ -123,7 +123,7 @@
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
};
button@7 {
right-joystick-down {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@ -131,7 +131,7 @@
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
};
button@8 {
dpad-left {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@ -139,7 +139,7 @@
gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
};
button@9 {
dpad-right {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@ -147,7 +147,7 @@
gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
};
button@10 {
dpad-up {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@ -155,7 +155,7 @@
gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
};
button@11 {
dpad-down {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@ -163,49 +163,49 @@
gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
};
button@12 {
x {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
};
button@13 {
y {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
};
button@14 {
a {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
};
button@15 {
b {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
};
button@16 {
select {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
};
button@17 {
start {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
};
button@18 {
top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
};
button@19 {
top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
@ -222,8 +222,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -235,8 +233,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
@ -249,8 +245,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@ -267,35 +261,35 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
button@600 {
button-600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
button@800 {
button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
button-1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
@ -304,8 +298,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -318,7 +310,7 @@
};
&pio {
key_pins_inet9f: key_pins@0 {
key_pins_inet9f: key-pins {
pins = "PA0", "PA1", "PA3", "PA4",
"PA5", "PA6", "PA8", "PA9",
"PA11", "PA12", "PA13",
@ -328,13 +320,13 @@
bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -376,7 +368,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

21
arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
View File

@ -57,7 +57,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
pinctrl-0 = <&emac_pins>;
phy = <&phy1>;
status = "okay";
};
@ -67,6 +67,9 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
axp209: pmic@34 {
interrupts = <0>;
};
@ -74,19 +77,19 @@
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -100,7 +103,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -114,7 +117,11 @@
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-0 = <&uart0_pb_pins>;
};

26
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
View File

@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_q5>;
green {
label = "q5:green:usr";
@ -74,8 +72,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&emac_power_pin_q5>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -98,8 +94,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -109,8 +103,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -125,7 +117,7 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
@ -139,8 +131,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -160,18 +150,6 @@
status = "okay";
};
&pio {
emac_power_pin_q5: emac_power_pin@0 {
pins = "PH19";
function = "gpio_out";
};
led_pins_q5: led_pins@0 {
pins = "PH20";
function = "gpio_out";
};
};
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
@ -187,7 +165,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

25
arch/arm/boot/dts/sun4i-a10-marsboard.dts
View File

@ -61,8 +61,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_marsboard>;
red1 {
label = "marsboard:red1:usr";
@ -107,27 +105,19 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@ -140,8 +130,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -162,12 +150,7 @@
};
&pio {
led_pins_marsboard: led_pins@0 {
pins = "PB5", "PB6", "PB7", "PB8";
function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@ -184,14 +167,14 @@
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

10
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
View File

@ -70,8 +70,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -86,18 +84,16 @@
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
pinctrl-0 = <&ir0_rx_pins>;
status = "okay";
};
&ir0_rx_pins_a {
&ir0_rx_pins {
/* The ir receiver is not always populated */
bias-pull-up;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -132,7 +128,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

24
arch/arm/boot/dts/sun4i-a10-mk802.dts
View File

@ -71,8 +71,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -88,23 +86,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PH4";
function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
pins = "PH5";
function = "gpio_in";
};
usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
pins = "PH12";
function = "gpio_out";
};
};
&reg_usb0_vbus {
status = "okay";
};
@ -114,14 +95,13 @@
};
&reg_usb2_vbus {
pinctrl-0 = <&usb2_vbus_pin_mk802>;
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
@ -131,8 +111,6 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;

6
arch/arm/boot/dts/sun4i-a10-mk802ii.dts
View File

@ -67,8 +67,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -82,8 +80,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -105,7 +101,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

47
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
View File

@ -58,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -89,6 +100,10 @@
cooling-max-level = <2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -98,8 +113,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -108,9 +121,17 @@
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -124,8 +145,6 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
@ -144,8 +163,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -166,24 +183,19 @@
};
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
pins = "PC3";
function = "gpio_out";
};
led_pins_olinuxinolime: led_pins@0 {
led_pins_olinuxinolime: led-pin {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -191,7 +203,6 @@
};
&reg_ahci_5v {
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@ -210,7 +221,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

32
arch/arm/boot/dts/sun4i-a10-pcduino.dts
View File

@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_pcduino>;
tx {
label = "pcduino:green:tx";
@ -76,26 +74,24 @@
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_pcduino>;
#address-cells = <1>;
#size-cells = <0>;
button@0 {
back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
button@1 {
home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
button@2 {
menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
@ -116,8 +112,6 @@
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
@ -127,8 +121,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -146,8 +138,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -168,17 +158,7 @@
};
&pio {
led_pins_pcduino: led_pins@0 {
pins = "PH15", "PH16";
function = "gpio_out";
};
key_pins_pcduino: key_pins@0 {
pins = "PH17", "PH18", "PH19";
function = "gpio_in";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
@ -214,7 +194,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

9
arch/arm/boot/dts/sun4i-a10-pcduino2.dts
View File

@ -55,16 +55,7 @@
compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
};
&pio {
usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
pins = "PD2";
function = "gpio_out";
};
};
&reg_usb2_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};

43
arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
View File

@ -58,8 +58,6 @@
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_protab>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
@ -72,8 +70,6 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
@ -87,8 +83,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -100,20 +94,14 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
pixcir_ts@5c {
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
touchscreen@5c {
compatible = "pixcir,pixcir_tangoc";
reg = <0x5c>;
interrupt-parent = <&pio>;
@ -132,14 +120,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@400 {
button-400 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <400000>;
};
button@800 {
button-800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@ -148,8 +136,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@ -162,28 +148,13 @@
};
&pio {
bl_en_pin_protab: bl_en_pin@0 {
pins = "PH7";
function = "gpio_out";
};
codec_pa_pin: codec_pa_pin@0 {
pins = "PH15";
function = "gpio_out";
};
touchscreen_pins: touchscreen_pins@0 {
pins = "PA5", "PB13";
function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
@ -192,7 +163,7 @@
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@ -231,7 +202,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

1068
arch/arm/boot/dts/sun4i-a10.dtsi
View File

File diff suppressed because it is too large Load Diff

8
arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
View File

@ -110,6 +110,14 @@
#include "axp209.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&lradc {
vref-supply = <&reg_ldo2>;
};

21
arch/arm/boot/dts/sun6i-a31-hummingbird.dts
View File

@ -62,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
vga-connector {
compatible = "vga-connector";
@ -162,6 +173,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;

113
arch/arm/boot/dts/sun6i-a31.dtsi
View File

@ -278,12 +278,23 @@
reg = <0>;
remote-endpoint = <&drc0_out_tcon0>;
};
tcon0_in_drc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon0_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
allwinner,tcon-channel = <1>;
};
};
};
};
@ -311,8 +322,13 @@
#size-cells = <0>;
reg = <0>;
tcon1_in_drc1: endpoint@0 {
tcon1_in_drc0: endpoint@0 {
reg = <0>;
remote-endpoint = <&drc0_out_tcon1>;
};
tcon1_in_drc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_out_tcon1>;
};
};
@ -321,6 +337,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon1_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon1>;
allwinner,tcon-channel = <1>;
};
};
};
};
@ -401,6 +423,49 @@
#size-cells = <0>;
};
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun6i-a31-hdmi";
reg = <0x01c16000 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
<&ccu CLK_HDMI_DDC>,
<&ccu 7>,
<&ccu 13>;
clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
resets = <&ccu RST_AHB1_HDMI>;
reset-names = "ahb";
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
dmas = <&dma 13>, <&dma 13>, <&dma 14>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
hdmi_in_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_hdmi>;
};
hdmi_in_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
usb_otg: usb@1c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
@ -662,6 +727,32 @@
status = "disabled";
};
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun6i-a31-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
resets = <&ccu RST_APB1_DAUDIO0>;
clock-names = "apb", "mod";
dmas = <&dma 3>, <&dma 3>;
dma-names = "rx", "tx";
status = "disabled";
};
i2s1: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun6i-a31-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
resets = <&ccu RST_APB1_DAUDIO1>;
clock-names = "apb", "mod";
dmas = <&dma 4>, <&dma 4>;
dma-names = "rx", "tx";
status = "disabled";
};
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
@ -1012,8 +1103,8 @@
#size-cells = <0>;
reg = <1>;
be1_out_drc1: endpoint@0 {
reg = <0>;
be1_out_drc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_in_be1>;
};
};
@ -1042,8 +1133,8 @@
#size-cells = <0>;
reg = <0>;
drc1_in_be1: endpoint@0 {
reg = <0>;
drc1_in_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_drc1>;
};
};
@ -1053,8 +1144,13 @@
#size-cells = <0>;
reg = <1>;
drc1_out_tcon1: endpoint@0 {
drc1_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_drc1>;
};
drc1_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_drc1>;
};
};
@ -1144,6 +1240,11 @@
reg = <0>;
remote-endpoint = <&tcon0_in_drc0>;
};
drc0_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_drc0>;
};
};
};
};

25
arch/arm/boot/dts/sun6i-a31s-primo81.dts
View File

@ -52,17 +52,42 @@
/ {
model = "MSI Primo81 tablet";
compatible = "msi,primo81", "allwinner,sun6i-a31s";
hdmi-connector {
compatible = "hdmi-connector";
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
&de {
status = "okay";
};
&ehci0 {
/* rtl8188etv wifi is connected here */
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
pinctrl-names = "default";

25
arch/arm/boot/dts/sun6i-a31s-sina31s.dts
View File

@ -53,6 +53,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -90,6 +101,10 @@
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
/* USB 2.0 4 port hub IC */
status = "okay";
@ -112,6 +127,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;

25
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
View File

@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -109,6 +120,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -130,6 +145,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;

25
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
View File

@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -91,6 +102,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -111,6 +126,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;

25
arch/arm/boot/dts/sun7i-a20-cubietruck.dts
View File

@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -126,6 +137,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -146,6 +161,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;

33
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
View File

@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -98,6 +109,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -173,6 +188,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@ -241,6 +266,14 @@
#include "axp209.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&reg_ahci_5v {
gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
status = "okay";

25
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
View File

@ -62,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -80,6 +91,10 @@
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -100,6 +115,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;

25
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
View File

@ -59,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -85,6 +96,10 @@
status = "okay";
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -105,6 +120,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;

70
arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts 100644
View File

@ -0,0 +1,70 @@
/*
* Copyright 2017 Olimex Ltd.
* Stefan Mavrodiev <stefan@olimex.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sun7i-a20-olinuxino-micro.dts"
/ {
model = "Olimex A20-OLinuXino-MICRO-eMMC";
compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
mmc-pwrseq = <&mmc2_pwrseq>;
status = "okay";
emmc: emmc@0 {
reg = <0>;
compatible = "mmc-card";
broken-hpi;
};
};

44
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
View File

@ -66,6 +66,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -92,6 +103,10 @@
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -102,7 +117,7 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@ -112,6 +127,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@ -229,6 +254,11 @@
};
&pio {
gmac_txerr: gmac_txerr@0 {
pins = "PA17";
function = "gmac";
};
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
pins = "PH11";
function = "gpio_in";
@ -256,6 +286,14 @@
#include "axp209.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@ -330,6 +368,10 @@
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

1023
arch/arm/boot/dts/sun7i-a20.dtsi
View File

File diff suppressed because it is too large Load Diff

199
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts 100644
View File

@ -0,0 +1,199 @@
/*
* Copyright (C) 2017 Touchless Biometric Systems AG
* Tomas Novotny <tomas@novotny.cz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-a83t.dtsi"
#include "sunxi-common-regulators.dtsi"
/ {
model = "TBS A711 Tablet";
compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_vbat: reg-vbat {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
reg_vmain: reg-vmain {
compatible = "regulator-fixed";
regulator-name = "vmain";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_vbat>;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
/*
* This is actually Bluetooth's clock, but we have to
* hook it up somewheere
*/
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
};
};
/*
* An USB-2 hub is connected here, which also means we don't need to
* enable the OHCI controller.
*/
&ehci0 {
status = "okay";
};
/*
* There's a modem connected here that needs to be initialised before
* being able to be enumerated.
*/
&ehci1 {
status = "okay";
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&mmc1 {
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
non-removable;
wakeup-source;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
pinctrl-names = "default";
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&r_rsb {
status = "okay";
axp813: pmic@3a3 {
compatible = "x-powers,axp813";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
ac100: codec@e89 {
compatible = "x-powers,ac100";
reg = <0xe89>;
ac100_codec: codec {
compatible = "x-powers,ac100-codec";
interrupt-parent = <&r_pio>;
interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
#clock-cells = <0>;
clock-output-names = "4M_adda";
};
ac100_rtc: rtc {
compatible = "x-powers,ac100-rtc";
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
clocks = <&ac100_codec>;
#clock-cells = <1>;
clock-output-names = "cko1_rtc",
"cko2_rtc",
"cko3_rtc";
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
/* There's the BT part of the AP6210 connected to that UART */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
&usbphy {
usb1_vbus_supply = <&reg_vcc5v0>;
usb2_vbus_supply = <&reg_vcc5v0>;
status = "okay";
};

35
arch/arm/boot/dts/sun8i-a83t.dtsi
View File

@ -54,12 +54,6 @@
#address-cells = <1>;
#size-cells = <1>;
aliases {
};
chosen {
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -348,6 +342,14 @@
bias-pull-up;
};
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
pins = "PC5", "PC6", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13",
@ -371,6 +373,16 @@
pins = "PF2", "PF4";
function = "uart0";
};
uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
};
};
timer@1c20c00 {
@ -415,6 +427,17 @@
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,

20
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
View File

@ -63,7 +63,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwr_led_bpi_m2p>;
pwr_led {
label = "bananapi-m2-plus:red:pwr";
@ -75,7 +74,6 @@
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&sw_r_bpi_m2p>;
sw4 {
label = "power";
@ -97,7 +95,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_en_bpi_m2p>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
@ -171,23 +168,6 @@
status = "okay";
};
&r_pio {
pwr_led_bpi_m2p: led_pins@0 {
pins = "PL10";
function = "gpio_out";
};
sw_r_bpi_m2p: key_pins@0 {
pins = "PL3";
function = "gpio_in";
};
wifi_en_bpi_m2p: wifi_en_pin {
pins = "PL7";
function = "gpio_out";
};
};
&reg_usb0_vbus {
gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
status = "okay";

42
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
View File

@ -45,6 +45,17 @@
/ {
model = "FriendlyArm NanoPi M1 Plus";
compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
aliases {
serial1 = &uart3;
ethernet1 = &sdio_wifi;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
};
&ehci1 {
@ -55,6 +66,31 @@
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
sdio_wifi: sdio_wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
interrupt-names = "host-wake";
};
};
&ohci1 {
status = "okay";
};
@ -62,3 +98,9 @@
&ohci2 {
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
status = "okay";
};

6
arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
View File

@ -55,6 +55,12 @@
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&ohci1 {
status = "okay";
};

8
arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
View File

@ -81,7 +81,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sw_r_npi>;
k1@0 {
k1 {
label = "k1";
linux,code = <KEY_POWER>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@ -108,19 +108,19 @@
};
&pio {
leds_npi: led_pins@0 {
leds_npi: led_pins {
pins = "PA10";
function = "gpio_out";
};
};
&r_pio {
leds_r_npi: led_pins@0 {
leds_r_npi: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_npi: key_pins@0 {
sw_r_npi: key_pins {
pins = "PL3";
function = "gpio_in";
};

8
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
View File

@ -152,24 +152,24 @@
};
&pio {
leds_opc: led_pins@0 {
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
sw_r_opc: key_pins {
pins = "PL3", "PL4";
function = "gpio_in";
};
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin {
pins = "PL7";
function = "gpio_out";
};

6
arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
View File

@ -141,19 +141,19 @@
};
&pio {
leds_opc: led_pins@0 {
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};

6
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
View File

@ -116,19 +116,19 @@
};
&pio {
leds_opc: led_pins@0 {
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};

6
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
View File

@ -146,19 +146,19 @@
};
&pio {
leds_opc: led_pins@0 {
leds_opc: led_pins {
pins = "PA15";
function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
leds_r_opc: led_pins {
pins = "PL10";
function = "gpio_out";
};
sw_r_opc: key_pins@0 {
sw_r_opc: key_pins {
pins = "PL3";
function = "gpio_in";
};

2
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
View File

@ -92,7 +92,7 @@
};
&pio {
usb3_vbus_pin_a: usb3_vbus_pin@0 {
usb3_vbus_pin_a: usb3_vbus_pin {
pins = "PG11";
function = "gpio_out";
};

209
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts 100644
View File

@ -0,0 +1,209 @@
/*
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-r40.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Banana Pi BPI-M2-Ultra";
compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pwr-led {
label = "bananapi:red:pwr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
user-led-green {
label = "bananapi:green:user";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
user-led-blue {
label = "bananapi:blue:user";
gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
};
};
reg_vcc5v0: vcc5v0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
};
};
&ehci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&i2c0 {
status = "okay";
axp22x: pmic@34 {
compatible = "x-powers,axp221";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-sys";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
cd-inverted;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <&reg_dldo2>;
vqmmc-supply = <&reg_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&mmc2 {
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
status = "okay";
};
&ohci1 {
status = "okay";
};
&ohci2 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_vcc5v0>;
usb2_vbus-supply = <&reg_vcc5v0>;
status = "okay";
};

473
arch/arm/boot/dts/sun8i-r40.dtsi 100644
View File

@ -0,0 +1,473 @@
/*
* Copyright 2017 Chen-Yu Tsai <wens@csie.org>
* Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: osc24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
pinctrl-0 = <&mmc0_pins>;
pinctrl-names = "default";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@1c10000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@1c11000 {
compatible = "allwinner,sun8i-r40-emmc",
"allwinner,sun50i-a64-emmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
pinctrl-0 = <&mmc2_pins>;
pinctrl-names = "default";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc3: mmc@1c12000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC3>;
reset-names = "ahb";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usbphy: phy@1c13400 {
compatible = "allwinner,sun8i-r40-usb-phy";
reg = <0x01c13400 0x14>,
<0x01c14800 0x4>,
<0x01c19800 0x4>,
<0x01c1c800 0x4>;
reg-names = "phy_ctrl",
"pmu0",
"pmu1",
"pmu2";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_PHY2>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci1: usb@1c19000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c19000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@1c19400 {
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
reg = <0x01c19400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI1>,
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ehci2: usb@1c1c000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI2>;
resets = <&ccu RST_BUS_EHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ohci2: usb@1c1c400 {
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI2>,
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc1_pg_pins: mmc1-pg-pins {
pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_pins: mmc2-pins {
pins = "PC5", "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13", "PC14",
"PC15", "PC24";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
};
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART5>;
resets = <&ccu RST_BUS_UART5>;
status = "disabled";
};
uart6: serial@1c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART6>;
resets = <&ccu RST_BUS_UART6>;
status = "disabled";
};
uart7: serial@1c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART7>;
resets = <&ccu RST_BUS_UART7>;
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c3: i2c@1c2b800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c4: i2c@1c2c000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};

173
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts 100644
View File

@ -0,0 +1,173 @@
/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-r40.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Banana Pi M2 Berry";
compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pwr-led {
label = "bananapi:red:pwr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
user-led {
label = "bananapi:green:user";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
};
reg_vcc5v0: vcc5v0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
};
};
&i2c0 {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-sys";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-io";
};
&reg_dldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
cd-inverted;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <&reg_dldo2>;
vqmmc-supply = <&reg_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

30
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
View File

@ -62,8 +62,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_cubieboard4>;
green {
label = "cubieboard4:green:usr";
@ -76,7 +74,7 @@
};
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
@ -87,7 +85,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
@ -97,7 +95,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>;
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_cldo3>;
mmc-pwrseq = <&wifi_pwrseq>;
@ -130,30 +128,10 @@
clocks = <&ac100_rtc 0>;
};
&pio {
led_pins_cubieboard4: led-pins@0 {
pins = "PH6", "PH17";
function = "gpio_out";
};
mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
pins = "PH18";
function = "gpio_in";
bias-pull-up;
};
};
&r_ir {
status = "okay";
};
&r_pio {
wifi_en_pin_cubieboard4: wifi_en_pin@0 {
pins = "PL2";
function = "gpio_out";
};
};
&r_rsb {
status = "okay";
@ -427,6 +405,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

50
arch/arm/boot/dts/sun9i-a80-optimus.dts
View File

@ -62,11 +62,8 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
/* The LED names match those found on the board */
led2 {
label = "optimus:led2:usr";
gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
@ -86,8 +83,6 @@
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_optimus>;
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@ -97,15 +92,13 @@
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_pin_optimus>;
regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
};
wifi_pwrseq: wifi_pwrseq {
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
@ -129,7 +122,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
@ -139,7 +132,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>;
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_cldo3>;
mmc-pwrseq = <&wifi_pwrseq>;
@ -180,45 +173,10 @@
clocks = <&ac100_rtc 0>;
};
&pio {
led_pins_optimus: led-pins@0 {
pins = "PH0", "PH1";
function = "gpio_out";
};
mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
pins = "PH18";
function = "gpio_in";
bias-pull-up;
};
usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
pins = "PH4";
function = "gpio_out";
};
usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
pins = "PH5";
function = "gpio_out";
};
};
&r_ir {
status = "okay";
};
&r_pio {
led_r_pins_optimus: led-pins@1 {
pins = "PM15";
function = "gpio_out";
};
wifi_en_pin_optimus: wifi_en_pin@0 {
pins = "PL2";
function = "gpio_out";
};
};
&r_rsb {
status = "okay";
@ -492,7 +450,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

31
arch/arm/boot/dts/sun9i-a80.dtsi
View File

@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun9i-a80-ccu.h>
@ -54,6 +52,8 @@
#include <dt-bindings/reset/sun9i-a80-usb.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
cpus {
@ -109,11 +109,6 @@
};
};
memory {
/* 8GB max. with LPAE */
reg = <0 0x20000000 0x02 0>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@ -144,7 +139,7 @@
* would also throw all the PLL clock rates off, or just the
* downstream clocks in the PRCM.
*/
osc24M: osc24M_clk {
osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@ -156,7 +151,7 @@
* AC100 codec/RTC chip. This serves as a placeholder for
* board dts files to specify the source.
*/
osc32k: osc32k_clk {
osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@ -174,7 +169,7 @@
clock-output-names = "cpus";
};
ahbs: ahbs_clk {
ahbs: clk-ahbs {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@ -494,12 +489,12 @@
#size-cells = <0>;
#gpio-cells = <3>;
i2c3_pins_a: i2c3@0 {
i2c3_pins: i2c3-pins {
pins = "PG10", "PG11";
function = "i2c3";
};
mmc0_pins: mmc0 {
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1" ,"PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@ -507,7 +502,7 @@
bias-pull-up;
};
mmc1_pins: mmc1 {
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1" ,"PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@ -515,7 +510,7 @@
bias-pull-up;
};
mmc2_8bit_pins: mmc2_8bit {
mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
@ -525,12 +520,12 @@
bias-pull-up;
};
uart0_pins_a: uart0@0 {
uart0_ph_pins: uart0-ph-pins {
pins = "PH12", "PH13";
function = "uart0";
};
uart4_pins_a: uart4@0 {
uart4_pins: uart4-pins {
pins = "PG12", "PG13", "PG14", "PG15";
function = "uart4";
};
@ -713,12 +708,12 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
r_ir_pins: r_ir {
r_ir_pins: r-ir-pins {
pins = "PL6";
function = "s_cir_rx";
};
r_rsb_pins: r_rsb {
r_rsb_pins: r-rsb-pins {
pins = "PN0", "PN1";
function = "s_rsb";
drive-strength = <20>;

45
arch/arm/boot/dts/sunxi-h3-h5.dtsi
View File

@ -310,7 +310,7 @@
function = "i2c2";
};
mmc0_pins_a: mmc0@0 {
mmc0_pins_a: mmc0 {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@ -318,13 +318,13 @@
bias-pull-up;
};
mmc0_cd_pin: mmc0_cd_pin@0 {
mmc0_cd_pin: mmc0_cd_pin {
pins = "PF6";
function = "gpio_in";
bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
mmc1_pins_a: mmc1 {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@ -342,7 +342,7 @@
bias-pull-up;
};
spdif_tx_pins_a: spdif@0 {
spdif_tx_pins_a: spdif {
pins = "PA17";
function = "spdif";
};
@ -357,7 +357,7 @@
function = "spi1";
};
uart0_pins_a: uart0@0 {
uart0_pins_a: uart0 {
pins = "PA4", "PA5";
function = "uart0";
};
@ -381,6 +381,11 @@
pins = "PA13", "PA14";
function = "uart3";
};
uart3_rts_cts_pins: uart3_rts_cts {
pins = "PA15", "PA16";
function = "uart3";
};
};
timer@1c20c00 {
@ -450,6 +455,32 @@
status = "disabled";
};
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma 3>, <&dma 3>;
resets = <&ccu RST_BUS_I2S0>;
dma-names = "rx", "tx";
status = "disabled";
};
i2s1: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma 4>, <&dma 4>;
resets = <&ccu RST_BUS_I2S1>;
dma-names = "rx", "tx";
status = "disabled";
};
codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
@ -544,7 +575,7 @@
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
@ -609,7 +640,7 @@
interrupt-controller;
#interrupt-cells = <3>;
ir_pins_a: ir@0 {
ir_pins_a: ir {
pins = "PL11";
function = "s_cir_rx";
};

4
arch/arm/boot/dts/sunxi-itead-core-common.dtsi
View File

@ -65,8 +65,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@ -75,8 +73,6 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};

9
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
View File

@ -61,13 +61,6 @@
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&ehci0 {
@ -91,7 +84,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;