redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

DMAENGINE: generic slave channel control v3 

This adds an interface to the DMAengine to make it possible to
reconfigure a slave channel at runtime. We add a few foreseen
config parameters to the passed struct, with a void * pointer
for custom per-device or per-platform runtime slave data.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
hifive-unleashed-5.1
Linus Walleij 2010-08-04 13:37:33 +02:00 committed by Dan Williams
parent 0c42bd0e42
commit c156d0a5b0
1 changed files with 71 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

71
include/linux/dmaengine.h
View File

@ -114,11 +114,17 @@ enum dma_ctrl_flags {
* @DMA_TERMINATE_ALL: terminate all ongoing transfers
* @DMA_PAUSE: pause ongoing transfers
* @DMA_RESUME: resume paused transfer
* @DMA_SLAVE_CONFIG: this command is only implemented by DMA controllers
* that need to runtime reconfigure the slave channels (as opposed to passing
* configuration data in statically from the platform). An additional
* argument of struct dma_slave_config must be passed in with this
* command.
*/
enum dma_ctrl_cmd {
DMA_TERMINATE_ALL,
DMA_PAUSE,
DMA_RESUME,
DMA_SLAVE_CONFIG,
};
/**
@ -199,6 +205,71 @@ struct dma_chan_dev {
atomic_t *idr_ref;
};
/**
* enum dma_slave_buswidth - defines bus with of the DMA slave
* device, source or target buses
*/
enum dma_slave_buswidth {
DMA_SLAVE_BUSWIDTH_UNDEFINED = 0,
DMA_SLAVE_BUSWIDTH_1_BYTE = 1,
DMA_SLAVE_BUSWIDTH_2_BYTES = 2,
DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
};
/**
* struct dma_slave_config - dma slave channel runtime config
* @direction: whether the data shall go in or out on this slave
* channel, right now. DMA_TO_DEVICE and DMA_FROM_DEVICE are
* legal values, DMA_BIDIRECTIONAL is not acceptable since we
* need to differentiate source and target addresses.
* @src_addr: this is the physical address where DMA slave data
* should be read (RX), if the source is memory this argument is
* ignored.
* @dst_addr: this is the physical address where DMA slave data
* should be written (TX), if the source is memory this argument
* is ignored.
* @src_addr_width: this is the width in bytes of the source (RX)
* register where DMA data shall be read. If the source
* is memory this may be ignored depending on architecture.
* Legal values: 1, 2, 4, 8.
* @dst_addr_width: same as src_addr_width but for destination
* target (TX) mutatis mutandis.
* @src_maxburst: the maximum number of words (note: words, as in
* units of the src_addr_width member, not bytes) that can be sent
* in one burst to the device. Typically something like half the
* FIFO depth on I/O peripherals so you don't overflow it. This
* may or may not be applicable on memory sources.
* @dst_maxburst: same as src_maxburst but for destination target
* mutatis mutandis.
*
* This struct is passed in as configuration data to a DMA engine
* in order to set up a certain channel for DMA transport at runtime.
* The DMA device/engine has to provide support for an additional
* command in the channel config interface, DMA_SLAVE_CONFIG
* and this struct will then be passed in as an argument to the
* DMA engine device_control() function.
*
* The rationale for adding configuration information to this struct
* is as follows: if it is likely that most DMA slave controllers in
* the world will support the configuration option, then make it
* generic. If not: if it is fixed so that it be sent in static from
* the platform data, then prefer to do that. Else, if it is neither
* fixed at runtime, nor generic enough (such as bus mastership on
* some CPU family and whatnot) then create a custom slave config
* struct and pass that, then make this config a member of that
* struct, if applicable.
*/
struct dma_slave_config {
enum dma_data_direction direction;
dma_addr_t src_addr;
dma_addr_t dst_addr;
enum dma_slave_buswidth src_addr_width;
enum dma_slave_buswidth dst_addr_width;
u32 src_maxburst;
u32 dst_maxburst;
};
static inline const char *dma_chan_name(struct dma_chan *chan)
{
return dev_name(&chan->dev->device);