ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
This patch adds a generic target for SPEAr3xx machines that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - PL110 CLCD - SP805 WDT - Synopsys DW I2C - Synopsys DW ethernet - ST FSMC-NAND - ST SPEAR-SMI - ST SPEAR-KEYBOARD - ST SPEAR-RTC - ARASAN SDHCI-SPEAR - SPEAR-EHCI - SPEAR-OHCI Other peripheral devices will follow in later patches. This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of 4K for individual peripherals. This is done to have efficient TLB lookup for any I/O windows that are located closely together. ioremap() on this range will return this mapping only instead of creating another. Signed-off-by: Viresh Kumar <viresh.kumar@st.com>hifive-unleashed-5.1
Viresh Kumar
Arnd Bergmann
parent
5fb00f965e
commit
c5fa4fdcdb
|
|
@ -17,14 +17,14 @@ Introduction
|
|||
SPEAr (Platform)
|
||||
- SPEAr3XX (3XX SOC series, based on ARM9)
|
||||
- SPEAr300 (SOC)
|
||||
- SPEAr300_EVB (Evaluation Board)
|
||||
- SPEAr300 Evaluation Board
|
||||
- SPEAr310 (SOC)
|
||||
- SPEAr310_EVB (Evaluation Board)
|
||||
- SPEAr310 Evaluation Board
|
||||
- SPEAr320 (SOC)
|
||||
- SPEAr320_EVB (Evaluation Board)
|
||||
- SPEAr320 Evaluation Board
|
||||
- SPEAr6XX (6XX SOC series, based on ARM9)
|
||||
- SPEAr600 (SOC)
|
||||
- SPEAr600_EVB (Evaluation Board)
|
||||
- SPEAr600 Evaluation Board
|
||||
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
|
||||
- SPEAr1300 (SOC)
|
||||
|
||||
|
|
@ -51,10 +51,11 @@ Introduction
|
|||
Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
|
||||
spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
|
||||
specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
|
||||
mach-spear* also contains board specific files for each machine type.
|
||||
mach-spear* doesn't contains board specific files as they fully support
|
||||
Flattened Device Tree.
|
||||
|
||||
|
||||
Document Author
|
||||
---------------
|
||||
|
||||
Viresh Kumar, (c) 2010 ST Microelectronics
|
||||
Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
|
||||
|
|
|
|||
|
|
@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
|
|||
Required root node property:
|
||||
|
||||
compatible = "st,spear600";
|
||||
|
||||
Boards with the ST SPEAr300 SoC shall have the following properties:
|
||||
|
||||
Required root node property:
|
||||
|
||||
compatible = "st,spear300";
|
||||
|
||||
Boards with the ST SPEAr310 SoC shall have the following properties:
|
||||
|
||||
Required root node property:
|
||||
|
||||
compatible = "st,spear310";
|
||||
|
||||
Boards with the ST SPEAr320 SoC shall have the following properties:
|
||||
|
||||
Required root node property:
|
||||
|
||||
compatible = "st,spear320";
|
||||
|
|
|
|||
|
|
@ -0,0 +1,179 @@
|
|||
/*
|
||||
* DTS file for SPEAr300 Evaluation Baord
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "spear300.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ST SPEAr300 Evaluation Board";
|
||||
compatible = "st,spear300-evb", "st,spear300";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
clcd@60000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fsmc: flash@94000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gmac: eth@e0800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci@70000000 {
|
||||
int-gpio = <&gpio1 0 0>;
|
||||
power-gpio = <&gpio1 2 1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
smi: flash@fc000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi0: spi@d0100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci@e1800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@e1900000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@e2100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
apb {
|
||||
gpio0: gpio@fc980000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio1: gpio@a9000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@d0180000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
kbd@a0000000 {
|
||||
linux,keymap = < 0x00010000
|
||||
0x00020100
|
||||
0x00030200
|
||||
0x00040300
|
||||
0x00050400
|
||||
0x00060500
|
||||
0x00070600
|
||||
0x00080700
|
||||
0x00090800
|
||||
0x000a0001
|
||||
0x000c0101
|
||||
0x000d0201
|
||||
0x000e0301
|
||||
0x000f0401
|
||||
0x00100501
|
||||
0x00110601
|
||||
0x00120701
|
||||
0x00130801
|
||||
0x00140002
|
||||
0x00150102
|
||||
0x00160202
|
||||
0x00170302
|
||||
0x00180402
|
||||
0x00190502
|
||||
0x001a0602
|
||||
0x001b0702
|
||||
0x001c0802
|
||||
0x001d0003
|
||||
0x001e0103
|
||||
0x001f0203
|
||||
0x00200303
|
||||
0x00210403
|
||||
0x00220503
|
||||
0x00230603
|
||||
0x00240703
|
||||
0x00250803
|
||||
0x00260004
|
||||
0x00270104
|
||||
0x00280204
|
||||
0x00290304
|
||||
0x002a0404
|
||||
0x002b0504
|
||||
0x002c0604
|
||||
0x002d0704
|
||||
0x002e0804
|
||||
0x002f0005
|
||||
0x00300105
|
||||
0x00310205
|
||||
0x00320305
|
||||
0x00330405
|
||||
0x00340505
|
||||
0x00350605
|
||||
0x00360705
|
||||
0x00370805
|
||||
0x00380006
|
||||
0x00390106
|
||||
0x003a0206
|
||||
0x003b0306
|
||||
0x003c0406
|
||||
0x003d0506
|
||||
0x003e0606
|
||||
0x003f0706
|
||||
0x00400806
|
||||
0x00410007
|
||||
0x00420107
|
||||
0x00430207
|
||||
0x00440307
|
||||
0x00450407
|
||||
0x00460507
|
||||
0x00470607
|
||||
0x00480707
|
||||
0x00490807
|
||||
0x004a0008
|
||||
0x004b0108
|
||||
0x004c0208
|
||||
0x004d0308
|
||||
0x004e0408
|
||||
0x004f0508
|
||||
0x00500608
|
||||
0x00510708
|
||||
0x00520808 >;
|
||||
autorepeat;
|
||||
st,mode = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc@fc900000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@d0000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wdt@fc880000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,72 @@
|
|||
/*
|
||||
* DTS file for SPEAr300 SoC
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "spear3xx.dtsi"
|
||||
|
||||
/ {
|
||||
ahb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x60000000 0x60000000 0x50000000
|
||||
0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
clcd@60000000 {
|
||||
compatible = "arm,clcd-pl110", "arm,primecell";
|
||||
reg = <0x60000000 0x1000>;
|
||||
interrupts = <30>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fsmc: flash@94000000 {
|
||||
compatible = "st,spear600-fsmc-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x94000000 0x1000 /* FSMC Register */
|
||||
0x80000000 0x0010>; /* NAND Base */
|
||||
reg-names = "fsmc_regs", "nand_data";
|
||||
st,ale-off = <0x20000>;
|
||||
st,cle-off = <0x10000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@70000000 {
|
||||
compatible = "st,sdhci-spear";
|
||||
reg = <0x70000000 0x100>;
|
||||
interrupts = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xa0000000 0xa0000000 0x10000000
|
||||
0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
gpio1: gpio@a9000000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
gpio-controller;
|
||||
reg = <0xa9000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
kbd@a0000000 {
|
||||
compatible = "st,spear300-kbd";
|
||||
reg = <0xa0000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,107 @@
|
|||
/*
|
||||
* DTS file for SPEAr310 Evaluation Baord
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "spear310.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ST SPEAr310 Evaluation Board";
|
||||
compatible = "st,spear310-evb", "st,spear310";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
fsmc: flash@44000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gmac: eth@e0800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
smi: flash@fc000000 {
|
||||
status = "okay";
|
||||
clock-rate=<50000000>;
|
||||
|
||||
flash@f8000000 {
|
||||
label = "m25p64";
|
||||
reg = <0xf8000000 0x800000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
st,smi-fast-mode;
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@d0100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci@e1800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@e1900000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@e2100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
apb {
|
||||
gpio0: gpio@fc980000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@d0180000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc@fc900000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@d0000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@b2000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@b2080000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@b2100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@b2180000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@b2200000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wdt@fc880000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
/*
|
||||
* DTS file for SPEAr310 SoC
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "spear3xx.dtsi"
|
||||
|
||||
/ {
|
||||
ahb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x40000000 0x40000000 0x10000000
|
||||
0xb0000000 0xb0000000 0x10000000
|
||||
0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
fsmc: flash@44000000 {
|
||||
compatible = "st,spear600-fsmc-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x44000000 0x1000 /* FSMC Register */
|
||||
0x40000000 0x0010>; /* NAND Base */
|
||||
reg-names = "fsmc_regs", "nand_data";
|
||||
st,ale-off = <0x10000>;
|
||||
st,cle-off = <0x20000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xb0000000 0xb0000000 0x10000000
|
||||
0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
serial@b2000000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xb2000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@b2080000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xb2080000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@b2100000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xb2100000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@b2180000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xb2180000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@b2200000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xb2200000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,108 @@
|
|||
/*
|
||||
* DTS file for SPEAr320 Evaluation Baord
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "spear320.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ST SPEAr300 Evaluation Board";
|
||||
compatible = "st,spear300-evb", "st,spear300";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
clcd@90000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fsmc: flash@4c000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gmac: eth@e0800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci@70000000 {
|
||||
power-gpio = <&gpio0 2 1>;
|
||||
power_always_enb;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
smi: flash@fc000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi0: spi@d0100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi1: spi@a5000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi2: spi@a6000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci@e1800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@e1900000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@e2100000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
apb {
|
||||
gpio0: gpio@fc980000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@d0180000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@a7000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc@fc900000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@d0000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@a3000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@a4000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wdt@fc880000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,90 @@
|
|||
/*
|
||||
* DTS file for SPEAr320 SoC
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "spear3xx.dtsi"
|
||||
|
||||
/ {
|
||||
ahb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x40000000 0x40000000 0x70000000
|
||||
0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
clcd@90000000 {
|
||||
compatible = "arm,clcd-pl110", "arm,primecell";
|
||||
reg = <0x90000000 0x1000>;
|
||||
interrupts = <33>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fsmc: flash@4c000000 {
|
||||
compatible = "st,spear600-fsmc-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x4c000000 0x1000 /* FSMC Register */
|
||||
0x50000000 0x0010>; /* NAND Base */
|
||||
reg-names = "fsmc_regs", "nand_data";
|
||||
st,ale-off = <0x20000>;
|
||||
st,cle-off = <0x10000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@70000000 {
|
||||
compatible = "st,sdhci-spear";
|
||||
reg = <0x70000000 0x100>;
|
||||
interrupts = <29>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi1: spi@a5000000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <0xa5000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi2: spi@a6000000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <0xa6000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xa0000000 0xa0000000 0x10000000
|
||||
0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
i2c1: i2c@a7000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xa7000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@a3000000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xa3000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@a4000000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xa4000000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,136 @@
|
|||
/*
|
||||
* DTS file for all SPEAr3xx SoCs
|
||||
*
|
||||
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&vic>;
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
compatible = "arm,arm926ejs";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
vic: interrupt-controller@f1100000 {
|
||||
compatible = "arm,pl190-vic";
|
||||
interrupt-controller;
|
||||
reg = <0xf1100000 0x1000>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gmac: eth@e0800000 {
|
||||
compatible = "st,spear600-gmac";
|
||||
reg = <0xe0800000 0x8000>;
|
||||
interrupts = <23 22>;
|
||||
interrupt-names = "macirq", "eth_wake_irq";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
smi: flash@fc000000 {
|
||||
compatible = "st,spear600-smi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xfc000000 0x1000>;
|
||||
interrupts = <9>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi0: spi@d0100000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <0xd0100000 0x1000>;
|
||||
interrupts = <20>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci@e1800000 {
|
||||
compatible = "st,spear600-ehci", "usb-ehci";
|
||||
reg = <0xe1800000 0x1000>;
|
||||
interrupts = <26>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci@e1900000 {
|
||||
compatible = "st,spear600-ohci", "usb-ohci";
|
||||
reg = <0xe1900000 0x1000>;
|
||||
interrupts = <25>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci@e2100000 {
|
||||
compatible = "st,spear600-ohci", "usb-ohci";
|
||||
reg = <0xe2100000 0x1000>;
|
||||
interrupts = <27>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
gpio0: gpio@fc980000 {
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
reg = <0xfc980000 0x1000>;
|
||||
interrupts = <11>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@d0180000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xd0180000 0x1000>;
|
||||
interrupts = <21>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@fc900000 {
|
||||
compatible = "st,spear-rtc";
|
||||
reg = <0xfc900000 0x1000>;
|
||||
interrupts = <10>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@d0000000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xd0000000 0x1000>;
|
||||
interrupts = <19>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wdt@fc880000 {
|
||||
compatible = "arm,sp805", "arm,primecell";
|
||||
reg = <0xfc880000 0x1000>;
|
||||
interrupts = <12>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -5,39 +5,19 @@
|
|||
if ARCH_SPEAR3XX
|
||||
|
||||
menu "SPEAr3xx Implementations"
|
||||
config BOARD_SPEAR300_EVB
|
||||
bool "SPEAr300 Evaluation Board"
|
||||
select MACH_SPEAR300
|
||||
help
|
||||
Supports ST SPEAr300 Evaluation Board
|
||||
|
||||
config BOARD_SPEAR310_EVB
|
||||
bool "SPEAr310 Evaluation Board"
|
||||
select MACH_SPEAR310
|
||||
help
|
||||
Supports ST SPEAr310 Evaluation Board
|
||||
|
||||
config BOARD_SPEAR320_EVB
|
||||
bool "SPEAr320 Evaluation Board"
|
||||
select MACH_SPEAR320
|
||||
help
|
||||
Supports ST SPEAr320 Evaluation Board
|
||||
|
||||
endmenu
|
||||
|
||||
config MACH_SPEAR300
|
||||
bool "SPEAr300"
|
||||
bool "SPEAr300 Machine support with Device Tree"
|
||||
help
|
||||
Supports ST SPEAr300 Machine
|
||||
Supports ST SPEAr300 machine configured via the device-tree
|
||||
|
||||
config MACH_SPEAR310
|
||||
bool "SPEAr310"
|
||||
bool "SPEAr310 Machine support with Device Tree"
|
||||
help
|
||||
Supports ST SPEAr310 Machine
|
||||
Supports ST SPEAr310 machine configured via the device-tree
|
||||
|
||||
config MACH_SPEAR320
|
||||
bool "SPEAr320"
|
||||
bool "SPEAr320 Machine support with Device Tree"
|
||||
help
|
||||
Supports ST SPEAr320 Machine
|
||||
|
||||
Supports ST SPEAr320 machine configured via the device-tree
|
||||
endmenu
|
||||
endif #ARCH_SPEAR3XX
|
||||
|
|
|
|||
|
|
@ -3,24 +3,13 @@
|
|||
#
|
||||
|
||||
# common files
|
||||
obj-y += spear3xx.o clock.o
|
||||
obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o
|
||||
|
||||
# spear300 specific files
|
||||
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
|
||||
|
||||
# spear300 boards files
|
||||
obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
|
||||
|
||||
|
||||
# spear310 specific files
|
||||
obj-$(CONFIG_MACH_SPEAR310) += spear310.o
|
||||
|
||||
# spear310 boards files
|
||||
obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
|
||||
|
||||
|
||||
# spear320 specific files
|
||||
obj-$(CONFIG_MACH_SPEAR320) += spear320.o
|
||||
|
||||
# spear320 boards files
|
||||
obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
|
||||
|
|
|
|||
|
|
@ -1,3 +1,7 @@
|
|||
zreladdr-y += 0x00008000
|
||||
params_phys-y := 0x00000100
|
||||
initrd_phys-y := 0x00800000
|
||||
|
||||
dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
|
||||
dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
|
||||
dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <plat/clock.h>
|
||||
#include <mach/misc_regs.h>
|
||||
|
|
@ -673,11 +674,11 @@ static struct clk_lookup spear_clk_lookups[] = {
|
|||
CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
|
||||
CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
|
||||
/* clock derived from 32 KHz osc clk */
|
||||
CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
|
||||
CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
|
||||
/* clock derived from 24 MHz osc clk */
|
||||
CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
|
||||
CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
|
||||
CLKDEV_INIT("wdt", NULL, &wdt_clk),
|
||||
CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
|
||||
/* clock derived from pll1 clk */
|
||||
CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
|
||||
CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
|
||||
|
|
@ -686,7 +687,7 @@ static struct clk_lookup spear_clk_lookups[] = {
|
|||
CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
|
||||
CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
|
||||
CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
|
||||
CLKDEV_INIT("uart", NULL, &uart_clk),
|
||||
CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
|
||||
CLKDEV_INIT("firda", NULL, &firda_clk),
|
||||
CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
|
||||
CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
|
||||
|
|
@ -699,81 +700,95 @@ static struct clk_lookup spear_clk_lookups[] = {
|
|||
CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
|
||||
/* clock derived from ahb clk */
|
||||
CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
|
||||
CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk),
|
||||
CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
|
||||
CLKDEV_INIT("dma", NULL, &dma_clk),
|
||||
CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
|
||||
CLKDEV_INIT("gmac", NULL, &gmac_clk),
|
||||
CLKDEV_INIT("smi", NULL, &smi_clk),
|
||||
CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
|
||||
CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
|
||||
CLKDEV_INIT("c3", NULL, &c3_clk),
|
||||
/* clock derived from apb clk */
|
||||
CLKDEV_INIT("adc", NULL, &adc_clk),
|
||||
CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
|
||||
CLKDEV_INIT("gpio", NULL, &gpio_clk),
|
||||
CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
|
||||
CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
|
||||
};
|
||||
|
||||
/* array of all spear 300 clock lookups */
|
||||
#ifdef CONFIG_MACH_SPEAR300
|
||||
static struct clk_lookup spear300_clk_lookups[] = {
|
||||
CLKDEV_INIT("clcd", NULL, &clcd_clk),
|
||||
CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
|
||||
CLKDEV_INIT("gpio1", NULL, &gpio1_clk),
|
||||
CLKDEV_INIT("keyboard", NULL, &kbd_clk),
|
||||
CLKDEV_INIT("sdhci", NULL, &sdhci_clk),
|
||||
CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
|
||||
CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
|
||||
CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
|
||||
CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
|
||||
CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
|
||||
};
|
||||
|
||||
void __init spear300_clk_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
|
||||
clk_register(&spear_clk_lookups[i]);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
|
||||
clk_register(&spear300_clk_lookups[i]);
|
||||
|
||||
clk_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* array of all spear 310 clock lookups */
|
||||
#ifdef CONFIG_MACH_SPEAR310
|
||||
static struct clk_lookup spear310_clk_lookups[] = {
|
||||
CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
|
||||
CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
|
||||
CLKDEV_INIT(NULL, "emi", &emi_clk),
|
||||
CLKDEV_INIT("uart1", NULL, &uart1_clk),
|
||||
CLKDEV_INIT("uart2", NULL, &uart2_clk),
|
||||
CLKDEV_INIT("uart3", NULL, &uart3_clk),
|
||||
CLKDEV_INIT("uart4", NULL, &uart4_clk),
|
||||
CLKDEV_INIT("uart5", NULL, &uart5_clk),
|
||||
CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
|
||||
CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
|
||||
CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
|
||||
CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
|
||||
CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
|
||||
};
|
||||
|
||||
void __init spear310_clk_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
|
||||
clk_register(&spear_clk_lookups[i]);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
|
||||
clk_register(&spear310_clk_lookups[i]);
|
||||
|
||||
clk_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* array of all spear 320 clock lookups */
|
||||
#ifdef CONFIG_MACH_SPEAR320
|
||||
static struct clk_lookup spear320_clk_lookups[] = {
|
||||
CLKDEV_INIT("clcd", NULL, &clcd_clk),
|
||||
CLKDEV_INIT("fsmc", NULL, &fsmc_clk),
|
||||
CLKDEV_INIT("i2c_designware.1", NULL, &i2c1_clk),
|
||||
CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
|
||||
CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
|
||||
CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
|
||||
CLKDEV_INIT(NULL, "emi", &emi_clk),
|
||||
CLKDEV_INIT("pwm", NULL, &pwm_clk),
|
||||
CLKDEV_INIT("sdhci", NULL, &sdhci_clk),
|
||||
CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
|
||||
CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
|
||||
CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
|
||||
CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
|
||||
CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
|
||||
CLKDEV_INIT("uart1", NULL, &uart1_clk),
|
||||
CLKDEV_INIT("uart2", NULL, &uart2_clk),
|
||||
CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
|
||||
CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
|
||||
CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
|
||||
CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
|
||||
};
|
||||
#endif
|
||||
|
||||
void __init spear3xx_clk_init(void)
|
||||
void __init spear320_clk_init(void)
|
||||
{
|
||||
int i, cnt;
|
||||
struct clk_lookup *lookups;
|
||||
|
||||
if (machine_is_spear300()) {
|
||||
cnt = ARRAY_SIZE(spear300_clk_lookups);
|
||||
lookups = spear300_clk_lookups;
|
||||
} else if (machine_is_spear310()) {
|
||||
cnt = ARRAY_SIZE(spear310_clk_lookups);
|
||||
lookups = spear310_clk_lookups;
|
||||
} else {
|
||||
cnt = ARRAY_SIZE(spear320_clk_lookups);
|
||||
lookups = spear320_clk_lookups;
|
||||
}
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
|
||||
clk_register(&spear_clk_lookups[i]);
|
||||
|
||||
for (i = 0; i < cnt; i++)
|
||||
clk_register(&lookups[i]);
|
||||
for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
|
||||
clk_register(&spear320_clk_lookups[i]);
|
||||
|
||||
clk_init();
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -31,16 +31,13 @@
|
|||
#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2
|
||||
|
||||
/* Add spear3xx family device structure declarations here */
|
||||
extern struct amba_device spear3xx_gpio_device;
|
||||
extern struct amba_device spear3xx_uart_device;
|
||||
extern struct sys_timer spear3xx_timer;
|
||||
extern struct pl022_ssp_controller pl022_plat_data;
|
||||
|
||||
/* Add spear3xx family function declarations here */
|
||||
void __init spear3xx_clk_init(void);
|
||||
void __init spear_setup_timer(void);
|
||||
void __init spear3xx_map_io(void);
|
||||
void __init spear3xx_init_irq(void);
|
||||
void __init spear3xx_init(void);
|
||||
void __init spear3xx_dt_init_irq(void);
|
||||
|
||||
void spear_restart(char, const char *);
|
||||
|
||||
|
|
@ -99,9 +96,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
|
|||
|
||||
/* spear300 declarations */
|
||||
#ifdef CONFIG_MACH_SPEAR300
|
||||
/* Add spear300 machine device structure declarations here */
|
||||
extern struct amba_device spear300_gpio1_device;
|
||||
|
||||
/* pad mux modes */
|
||||
extern struct pmx_mode spear300_nand_mode;
|
||||
extern struct pmx_mode spear300_nor_mode;
|
||||
|
|
@ -133,16 +127,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
|
|||
extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
|
||||
extern struct pmx_dev spear300_pmx_gpio1;
|
||||
|
||||
/* Add spear300 machine function declarations here */
|
||||
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
||||
u8 pmx_dev_count);
|
||||
/* Add spear300 machine declarations here */
|
||||
void __init spear300_clk_init(void);
|
||||
|
||||
#endif /* CONFIG_MACH_SPEAR300 */
|
||||
|
||||
/* spear310 declarations */
|
||||
#ifdef CONFIG_MACH_SPEAR310
|
||||
/* Add spear310 machine device structure declarations here */
|
||||
|
||||
/* pad mux devices */
|
||||
extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
|
||||
extern struct pmx_dev spear310_pmx_emi_cs_2_3;
|
||||
|
|
@ -153,16 +144,13 @@ extern struct pmx_dev spear310_pmx_fsmc;
|
|||
extern struct pmx_dev spear310_pmx_rs485_0_1;
|
||||
extern struct pmx_dev spear310_pmx_tdm0;
|
||||
|
||||
/* Add spear310 machine function declarations here */
|
||||
void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
||||
u8 pmx_dev_count);
|
||||
/* Add spear310 machine declarations here */
|
||||
void __init spear310_clk_init(void);
|
||||
|
||||
#endif /* CONFIG_MACH_SPEAR310 */
|
||||
|
||||
/* spear320 declarations */
|
||||
#ifdef CONFIG_MACH_SPEAR320
|
||||
/* Add spear320 machine device structure declarations here */
|
||||
|
||||
/* pad mux modes */
|
||||
extern struct pmx_mode spear320_auto_net_smii_mode;
|
||||
extern struct pmx_mode spear320_auto_net_mii_mode;
|
||||
|
|
@ -193,9 +181,8 @@ extern struct pmx_dev spear320_pmx_smii0;
|
|||
extern struct pmx_dev spear320_pmx_smii1;
|
||||
extern struct pmx_dev spear320_pmx_i2c1;
|
||||
|
||||
/* Add spear320 machine function declarations here */
|
||||
void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
||||
u8 pmx_dev_count);
|
||||
/* Add spear320 machine declarations here */
|
||||
void __init spear320_clk_init(void);
|
||||
|
||||
#endif /* CONFIG_MACH_SPEAR320 */
|
||||
|
||||
|
|
|
|||
|
|
@ -17,7 +17,4 @@
|
|||
#include <plat/hardware.h>
|
||||
#include <mach/spear.h>
|
||||
|
||||
/* Vitual to physical translation of statically mapped space */
|
||||
#define IO_ADDRESS(x) (x | 0xF0000000)
|
||||
|
||||
#endif /* __MACH_HARDWARE_H */
|
||||
|
|
|
|||
|
|
@ -25,8 +25,9 @@
|
|||
|
||||
/* ICM1 - Low speed connection */
|
||||
#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
|
||||
#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
|
||||
#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
|
||||
#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
|
||||
#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
|
||||
#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
|
||||
#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
|
||||
#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
|
||||
|
|
@ -53,11 +54,11 @@
|
|||
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
|
||||
#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
|
||||
#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
|
||||
#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
|
||||
|
||||
/* ICM3 - Basic Subsystem */
|
||||
#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
|
||||
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
|
||||
#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
|
||||
#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
|
||||
#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
|
||||
#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
|
||||
|
|
@ -65,9 +66,9 @@
|
|||
#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
|
||||
#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
|
||||
#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
|
||||
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
|
||||
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
|
||||
#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
|
||||
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
|
||||
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
|
||||
#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
|
||||
|
||||
/* Debug uart for linux, will be used for debug and uncompress messages */
|
||||
|
|
|
|||
|
|
@ -3,8 +3,8 @@
|
|||
*
|
||||
* SPEAr300 machine source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
* Copyright (C) 2009-2012 ST Microelectronics
|
||||
* Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
|
|
@ -13,10 +13,9 @@
|
|||
|
||||
#define pr_fmt(fmt) "SPEAr300: " fmt
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/amba/pl061.h>
|
||||
#include <linux/ptrace.h>
|
||||
#include <asm/irq.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <plat/shirq.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
|
@ -425,24 +424,35 @@ static struct spear_shirq shirq_ras1 = {
|
|||
},
|
||||
};
|
||||
|
||||
/* Add spear300 specific devices here */
|
||||
/* arm gpio1 device registration */
|
||||
static struct pl061_platform_data gpio1_plat_data = {
|
||||
.gpio_base = 8,
|
||||
.irq_base = SPEAR300_GPIO1_INT_BASE,
|
||||
/* padmux devices to enable */
|
||||
static struct pmx_dev *spear300_evb_pmx_devs[] = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_pmx_i2c,
|
||||
&spear3xx_pmx_ssp_cs,
|
||||
&spear3xx_pmx_ssp,
|
||||
&spear3xx_pmx_mii,
|
||||
&spear3xx_pmx_uart0,
|
||||
|
||||
/* spear300 specific devices */
|
||||
&spear300_pmx_fsmc_2_chips,
|
||||
&spear300_pmx_clcd,
|
||||
&spear300_pmx_telecom_sdhci_4bit,
|
||||
&spear300_pmx_gpio1,
|
||||
};
|
||||
|
||||
AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
|
||||
{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
|
||||
/* Add SPEAr300 auxdata to pass platform data */
|
||||
static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
|
||||
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
|
||||
&pl022_plat_data),
|
||||
{}
|
||||
};
|
||||
|
||||
/* spear300 routines */
|
||||
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
||||
u8 pmx_dev_count)
|
||||
static void __init spear300_dt_init(void)
|
||||
{
|
||||
int ret = 0;
|
||||
int ret = -EINVAL;
|
||||
|
||||
/* call spear3xx family common init function */
|
||||
spear3xx_init();
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
spear300_auxdata_lookup, NULL);
|
||||
|
||||
/* shared irq registration */
|
||||
shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
|
||||
|
|
@ -452,18 +462,45 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
|||
pr_err("Error registering Shared IRQ\n");
|
||||
}
|
||||
|
||||
/* pmx initialization */
|
||||
pmx_driver.mode = pmx_mode;
|
||||
pmx_driver.devs = pmx_devs;
|
||||
pmx_driver.devs_count = pmx_dev_count;
|
||||
if (of_machine_is_compatible("st,spear300-evb")) {
|
||||
/* pmx initialization */
|
||||
pmx_driver.mode = &spear300_photo_frame_mode;
|
||||
pmx_driver.devs = spear300_evb_pmx_devs;
|
||||
pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
|
||||
|
||||
pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
|
||||
if (pmx_driver.base) {
|
||||
ret = pmx_register(&pmx_driver);
|
||||
if (ret)
|
||||
pr_err("padmux: registration failed. err no: %d\n",
|
||||
ret);
|
||||
/* Free Mapping, device selection already done */
|
||||
iounmap(pmx_driver.base);
|
||||
}
|
||||
|
||||
pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
|
||||
if (pmx_driver.base) {
|
||||
ret = pmx_register(&pmx_driver);
|
||||
if (ret)
|
||||
pr_err("padmux: registration failed. err no: %d\n",
|
||||
ret);
|
||||
/* Free Mapping, device selection already done */
|
||||
iounmap(pmx_driver.base);
|
||||
pr_err("Initialization Failed");
|
||||
}
|
||||
}
|
||||
|
||||
static const char * const spear300_dt_board_compat[] = {
|
||||
"st,spear300",
|
||||
"st,spear300-evb",
|
||||
NULL,
|
||||
};
|
||||
|
||||
static void __init spear300_map_io(void)
|
||||
{
|
||||
spear3xx_map_io();
|
||||
spear300_clk_init();
|
||||
}
|
||||
|
||||
DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
|
||||
.map_io = spear300_map_io,
|
||||
.init_irq = spear3xx_dt_init_irq,
|
||||
.handle_irq = vic_handle_irq,
|
||||
.timer = &spear3xx_timer,
|
||||
.init_machine = spear300_dt_init,
|
||||
.restart = spear_restart,
|
||||
.dt_compat = spear300_dt_board_compat,
|
||||
MACHINE_END
|
||||
|
|
|
|||
|
|
@ -1,75 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-spear3xx/spear300_evb.c
|
||||
*
|
||||
* SPEAr300 evaluation board source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
/* padmux devices to enable */
|
||||
static struct pmx_dev *pmx_devs[] = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_pmx_i2c,
|
||||
&spear3xx_pmx_ssp_cs,
|
||||
&spear3xx_pmx_ssp,
|
||||
&spear3xx_pmx_mii,
|
||||
&spear3xx_pmx_uart0,
|
||||
|
||||
/* spear300 specific devices */
|
||||
&spear300_pmx_fsmc_2_chips,
|
||||
&spear300_pmx_clcd,
|
||||
&spear300_pmx_telecom_sdhci_4bit,
|
||||
&spear300_pmx_gpio1,
|
||||
};
|
||||
|
||||
static struct amba_device *amba_devs[] __initdata = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_gpio_device,
|
||||
&spear3xx_uart_device,
|
||||
|
||||
/* spear300 specific devices */
|
||||
&spear300_gpio1_device,
|
||||
};
|
||||
|
||||
static struct platform_device *plat_devs[] __initdata = {
|
||||
/* spear3xx specific devices */
|
||||
|
||||
/* spear300 specific devices */
|
||||
};
|
||||
|
||||
static void __init spear300_evb_init(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
/* call spear300 machine init function */
|
||||
spear300_init(&spear300_photo_frame_mode, pmx_devs,
|
||||
ARRAY_SIZE(pmx_devs));
|
||||
|
||||
/* Add Platform Devices */
|
||||
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
|
||||
|
||||
/* Add Amba Devices */
|
||||
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
|
||||
amba_device_register(amba_devs[i], &iomem_resource);
|
||||
}
|
||||
|
||||
MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
|
||||
.atag_offset = 0x100,
|
||||
.map_io = spear3xx_map_io,
|
||||
.init_irq = spear3xx_init_irq,
|
||||
.handle_irq = vic_handle_irq,
|
||||
.timer = &spear3xx_timer,
|
||||
.init_machine = spear300_evb_init,
|
||||
.restart = spear_restart,
|
||||
MACHINE_END
|
||||
|
|
@ -3,8 +3,8 @@
|
|||
*
|
||||
* SPEAr310 machine source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
* Copyright (C) 2009-2012 ST Microelectronics
|
||||
* Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
|
|
@ -13,8 +13,11 @@
|
|||
|
||||
#define pr_fmt(fmt) "SPEAr310: " fmt
|
||||
|
||||
#include <linux/ptrace.h>
|
||||
#include <asm/irq.h>
|
||||
#include <linux/amba/pl08x.h>
|
||||
#include <linux/amba/serial.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <plat/shirq.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
|
@ -257,17 +260,79 @@ static struct spear_shirq shirq_intrcomm_ras = {
|
|||
},
|
||||
};
|
||||
|
||||
/* Add spear310 specific devices here */
|
||||
/* padmux devices to enable */
|
||||
static struct pmx_dev *spear310_evb_pmx_devs[] = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_pmx_i2c,
|
||||
&spear3xx_pmx_ssp,
|
||||
&spear3xx_pmx_gpio_pin0,
|
||||
&spear3xx_pmx_gpio_pin1,
|
||||
&spear3xx_pmx_gpio_pin2,
|
||||
&spear3xx_pmx_gpio_pin3,
|
||||
&spear3xx_pmx_gpio_pin4,
|
||||
&spear3xx_pmx_gpio_pin5,
|
||||
&spear3xx_pmx_uart0,
|
||||
|
||||
/* spear310 routines */
|
||||
void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
||||
u8 pmx_dev_count)
|
||||
/* spear310 specific devices */
|
||||
&spear310_pmx_emi_cs_0_1_4_5,
|
||||
&spear310_pmx_emi_cs_2_3,
|
||||
&spear310_pmx_uart1,
|
||||
&spear310_pmx_uart2,
|
||||
&spear310_pmx_uart3_4_5,
|
||||
&spear310_pmx_fsmc,
|
||||
&spear310_pmx_rs485_0_1,
|
||||
&spear310_pmx_tdm0,
|
||||
};
|
||||
|
||||
/* uart devices plat data */
|
||||
static struct amba_pl011_data spear310_uart_data[] = {
|
||||
{
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart1_tx",
|
||||
.dma_rx_param = "uart1_rx",
|
||||
}, {
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart2_tx",
|
||||
.dma_rx_param = "uart2_rx",
|
||||
}, {
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart3_tx",
|
||||
.dma_rx_param = "uart3_rx",
|
||||
}, {
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart4_tx",
|
||||
.dma_rx_param = "uart4_rx",
|
||||
}, {
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart5_tx",
|
||||
.dma_rx_param = "uart5_rx",
|
||||
},
|
||||
};
|
||||
|
||||
/* Add SPEAr310 auxdata to pass platform data */
|
||||
static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
|
||||
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
|
||||
&pl022_plat_data),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
|
||||
&spear310_uart_data[0]),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
|
||||
&spear310_uart_data[1]),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
|
||||
&spear310_uart_data[2]),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
|
||||
&spear310_uart_data[3]),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
|
||||
&spear310_uart_data[4]),
|
||||
{}
|
||||
};
|
||||
|
||||
static void __init spear310_dt_init(void)
|
||||
{
|
||||
void __iomem *base;
|
||||
int ret = 0;
|
||||
|
||||
/* call spear3xx family common init function */
|
||||
spear3xx_init();
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
spear310_auxdata_lookup, NULL);
|
||||
|
||||
/* shared irq registration */
|
||||
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
|
||||
|
|
@ -297,13 +362,38 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
|||
pr_err("Error registering Shared IRQ 4\n");
|
||||
}
|
||||
|
||||
/* pmx initialization */
|
||||
pmx_driver.base = base;
|
||||
pmx_driver.mode = pmx_mode;
|
||||
pmx_driver.devs = pmx_devs;
|
||||
pmx_driver.devs_count = pmx_dev_count;
|
||||
if (of_machine_is_compatible("st,spear310-evb")) {
|
||||
/* pmx initialization */
|
||||
pmx_driver.base = base;
|
||||
pmx_driver.mode = NULL;
|
||||
pmx_driver.devs = spear310_evb_pmx_devs;
|
||||
pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
|
||||
|
||||
ret = pmx_register(&pmx_driver);
|
||||
if (ret)
|
||||
pr_err("padmux: registration failed. err no: %d\n", ret);
|
||||
ret = pmx_register(&pmx_driver);
|
||||
if (ret)
|
||||
pr_err("padmux: registration failed. err no: %d\n",
|
||||
ret);
|
||||
}
|
||||
}
|
||||
|
||||
static const char * const spear310_dt_board_compat[] = {
|
||||
"st,spear310",
|
||||
"st,spear310-evb",
|
||||
NULL,
|
||||
};
|
||||
|
||||
static void __init spear310_map_io(void)
|
||||
{
|
||||
spear3xx_map_io();
|
||||
spear310_clk_init();
|
||||
}
|
||||
|
||||
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
|
||||
.map_io = spear310_map_io,
|
||||
.init_irq = spear3xx_dt_init_irq,
|
||||
.handle_irq = vic_handle_irq,
|
||||
.timer = &spear3xx_timer,
|
||||
.init_machine = spear310_dt_init,
|
||||
.restart = spear_restart,
|
||||
.dt_compat = spear310_dt_board_compat,
|
||||
MACHINE_END
|
||||
|
|
|
|||
|
|
@ -1,81 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-spear3xx/spear310_evb.c
|
||||
*
|
||||
* SPEAr310 evaluation board source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
/* padmux devices to enable */
|
||||
static struct pmx_dev *pmx_devs[] = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_pmx_i2c,
|
||||
&spear3xx_pmx_ssp,
|
||||
&spear3xx_pmx_gpio_pin0,
|
||||
&spear3xx_pmx_gpio_pin1,
|
||||
&spear3xx_pmx_gpio_pin2,
|
||||
&spear3xx_pmx_gpio_pin3,
|
||||
&spear3xx_pmx_gpio_pin4,
|
||||
&spear3xx_pmx_gpio_pin5,
|
||||
&spear3xx_pmx_uart0,
|
||||
|
||||
/* spear310 specific devices */
|
||||
&spear310_pmx_emi_cs_0_1_4_5,
|
||||
&spear310_pmx_emi_cs_2_3,
|
||||
&spear310_pmx_uart1,
|
||||
&spear310_pmx_uart2,
|
||||
&spear310_pmx_uart3_4_5,
|
||||
&spear310_pmx_fsmc,
|
||||
&spear310_pmx_rs485_0_1,
|
||||
&spear310_pmx_tdm0,
|
||||
};
|
||||
|
||||
static struct amba_device *amba_devs[] __initdata = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_gpio_device,
|
||||
&spear3xx_uart_device,
|
||||
|
||||
/* spear310 specific devices */
|
||||
};
|
||||
|
||||
static struct platform_device *plat_devs[] __initdata = {
|
||||
/* spear3xx specific devices */
|
||||
|
||||
/* spear310 specific devices */
|
||||
};
|
||||
|
||||
static void __init spear310_evb_init(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
/* call spear310 machine init function */
|
||||
spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
|
||||
|
||||
/* Add Platform Devices */
|
||||
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
|
||||
|
||||
/* Add Amba Devices */
|
||||
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
|
||||
amba_device_register(amba_devs[i], &iomem_resource);
|
||||
}
|
||||
|
||||
MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
|
||||
.atag_offset = 0x100,
|
||||
.map_io = spear3xx_map_io,
|
||||
.init_irq = spear3xx_init_irq,
|
||||
.handle_irq = vic_handle_irq,
|
||||
.timer = &spear3xx_timer,
|
||||
.init_machine = spear310_evb_init,
|
||||
.restart = spear_restart,
|
||||
MACHINE_END
|
||||
|
|
@ -3,8 +3,8 @@
|
|||
*
|
||||
* SPEAr320 machine source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
* Copyright (C) 2009-2012 ST Microelectronics
|
||||
* Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
|
|
@ -13,8 +13,12 @@
|
|||
|
||||
#define pr_fmt(fmt) "SPEAr320: " fmt
|
||||
|
||||
#include <linux/ptrace.h>
|
||||
#include <asm/irq.h>
|
||||
#include <linux/amba/pl022.h>
|
||||
#include <linux/amba/pl08x.h>
|
||||
#include <linux/amba/serial.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <plat/shirq.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
|
@ -510,17 +514,79 @@ static struct spear_shirq shirq_intrcomm_ras = {
|
|||
},
|
||||
};
|
||||
|
||||
/* Add spear320 specific devices here */
|
||||
/* padmux devices to enable */
|
||||
static struct pmx_dev *spear320_evb_pmx_devs[] = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_pmx_i2c,
|
||||
&spear3xx_pmx_ssp,
|
||||
&spear3xx_pmx_mii,
|
||||
&spear3xx_pmx_uart0,
|
||||
|
||||
/* spear320 routines */
|
||||
void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
||||
u8 pmx_dev_count)
|
||||
/* spear320 specific devices */
|
||||
&spear320_pmx_fsmc,
|
||||
&spear320_pmx_sdhci,
|
||||
&spear320_pmx_i2s,
|
||||
&spear320_pmx_uart1,
|
||||
&spear320_pmx_uart2,
|
||||
&spear320_pmx_can,
|
||||
&spear320_pmx_pwm0,
|
||||
&spear320_pmx_pwm1,
|
||||
&spear320_pmx_pwm2,
|
||||
&spear320_pmx_mii1,
|
||||
};
|
||||
|
||||
static struct pl022_ssp_controller spear320_ssp_data[] = {
|
||||
{
|
||||
.bus_id = 1,
|
||||
.enable_dma = 1,
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "ssp1_tx",
|
||||
.dma_rx_param = "ssp1_rx",
|
||||
.num_chipselect = 2,
|
||||
}, {
|
||||
.bus_id = 2,
|
||||
.enable_dma = 1,
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "ssp2_tx",
|
||||
.dma_rx_param = "ssp2_rx",
|
||||
.num_chipselect = 2,
|
||||
}
|
||||
};
|
||||
|
||||
static struct amba_pl011_data spear320_uart_data[] = {
|
||||
{
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart1_tx",
|
||||
.dma_rx_param = "uart1_rx",
|
||||
}, {
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "uart2_tx",
|
||||
.dma_rx_param = "uart2_rx",
|
||||
},
|
||||
};
|
||||
|
||||
/* Add SPEAr310 auxdata to pass platform data */
|
||||
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
|
||||
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
|
||||
&pl022_plat_data),
|
||||
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
|
||||
&spear320_ssp_data[0]),
|
||||
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
|
||||
&spear320_ssp_data[1]),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
|
||||
&spear320_uart_data[0]),
|
||||
OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
|
||||
&spear320_uart_data[1]),
|
||||
{}
|
||||
};
|
||||
|
||||
static void __init spear320_dt_init(void)
|
||||
{
|
||||
void __iomem *base;
|
||||
int ret = 0;
|
||||
|
||||
/* call spear3xx family common init function */
|
||||
spear3xx_init();
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
spear320_auxdata_lookup, NULL);
|
||||
|
||||
/* shared irq registration */
|
||||
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
|
||||
|
|
@ -544,13 +610,38 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
|
|||
pr_err("Error registering Shared IRQ 4\n");
|
||||
}
|
||||
|
||||
/* pmx initialization */
|
||||
pmx_driver.base = base;
|
||||
pmx_driver.mode = pmx_mode;
|
||||
pmx_driver.devs = pmx_devs;
|
||||
pmx_driver.devs_count = pmx_dev_count;
|
||||
if (of_machine_is_compatible("st,spear320-evb")) {
|
||||
/* pmx initialization */
|
||||
pmx_driver.base = base;
|
||||
pmx_driver.mode = &spear320_auto_net_mii_mode;
|
||||
pmx_driver.devs = spear320_evb_pmx_devs;
|
||||
pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
|
||||
|
||||
ret = pmx_register(&pmx_driver);
|
||||
if (ret)
|
||||
pr_err("padmux: registration failed. err no: %d\n", ret);
|
||||
ret = pmx_register(&pmx_driver);
|
||||
if (ret)
|
||||
pr_err("padmux: registration failed. err no: %d\n",
|
||||
ret);
|
||||
}
|
||||
}
|
||||
|
||||
static const char * const spear320_dt_board_compat[] = {
|
||||
"st,spear320",
|
||||
"st,spear320-evb",
|
||||
NULL,
|
||||
};
|
||||
|
||||
static void __init spear320_map_io(void)
|
||||
{
|
||||
spear3xx_map_io();
|
||||
spear320_clk_init();
|
||||
}
|
||||
|
||||
DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
|
||||
.map_io = spear320_map_io,
|
||||
.init_irq = spear3xx_dt_init_irq,
|
||||
.handle_irq = vic_handle_irq,
|
||||
.timer = &spear3xx_timer,
|
||||
.init_machine = spear320_dt_init,
|
||||
.restart = spear_restart,
|
||||
.dt_compat = spear320_dt_board_compat,
|
||||
MACHINE_END
|
||||
|
|
|
|||
|
|
@ -1,79 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-spear3xx/spear320_evb.c
|
||||
*
|
||||
* SPEAr320 evaluation board source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
/* padmux devices to enable */
|
||||
static struct pmx_dev *pmx_devs[] = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_pmx_i2c,
|
||||
&spear3xx_pmx_ssp,
|
||||
&spear3xx_pmx_mii,
|
||||
&spear3xx_pmx_uart0,
|
||||
|
||||
/* spear320 specific devices */
|
||||
&spear320_pmx_fsmc,
|
||||
&spear320_pmx_sdhci,
|
||||
&spear320_pmx_i2s,
|
||||
&spear320_pmx_uart1,
|
||||
&spear320_pmx_uart2,
|
||||
&spear320_pmx_can,
|
||||
&spear320_pmx_pwm0,
|
||||
&spear320_pmx_pwm1,
|
||||
&spear320_pmx_pwm2,
|
||||
&spear320_pmx_mii1,
|
||||
};
|
||||
|
||||
static struct amba_device *amba_devs[] __initdata = {
|
||||
/* spear3xx specific devices */
|
||||
&spear3xx_gpio_device,
|
||||
&spear3xx_uart_device,
|
||||
|
||||
/* spear320 specific devices */
|
||||
};
|
||||
|
||||
static struct platform_device *plat_devs[] __initdata = {
|
||||
/* spear3xx specific devices */
|
||||
|
||||
/* spear320 specific devices */
|
||||
};
|
||||
|
||||
static void __init spear320_evb_init(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
/* call spear320 machine init function */
|
||||
spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
|
||||
ARRAY_SIZE(pmx_devs));
|
||||
|
||||
/* Add Platform Devices */
|
||||
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
|
||||
|
||||
/* Add Amba Devices */
|
||||
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
|
||||
amba_device_register(amba_devs[i], &iomem_resource);
|
||||
}
|
||||
|
||||
MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
|
||||
.atag_offset = 0x100,
|
||||
.map_io = spear3xx_map_io,
|
||||
.init_irq = spear3xx_init_irq,
|
||||
.handle_irq = vic_handle_irq,
|
||||
.timer = &spear3xx_timer,
|
||||
.init_machine = spear320_evb_init,
|
||||
.restart = spear_restart,
|
||||
MACHINE_END
|
||||
|
|
@ -3,8 +3,8 @@
|
|||
*
|
||||
* SPEAr3XX machines common source file
|
||||
*
|
||||
* Copyright (C) 2009 ST Microelectronics
|
||||
* Viresh Kumar<viresh.kumar@st.com>
|
||||
* Copyright (C) 2009-2012 ST Microelectronics
|
||||
* Viresh Kumar <viresh.kumar@st.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
|
|
@ -13,76 +13,14 @@
|
|||
|
||||
#define pr_fmt(fmt) "SPEAr3xx: " fmt
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/amba/pl061.h>
|
||||
#include <linux/ptrace.h>
|
||||
#include <linux/amba/pl022.h>
|
||||
#include <linux/amba/pl08x.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/io.h>
|
||||
#include <asm/hardware/vic.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/generic.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
/* Add spear3xx machines common devices here */
|
||||
/* gpio device registration */
|
||||
static struct pl061_platform_data gpio_plat_data = {
|
||||
.gpio_base = 0,
|
||||
.irq_base = SPEAR3XX_GPIO_INT_BASE,
|
||||
};
|
||||
|
||||
AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
|
||||
{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
|
||||
|
||||
/* uart device registration */
|
||||
AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
|
||||
{SPEAR3XX_IRQ_UART}, NULL);
|
||||
|
||||
/* Do spear3xx familiy common initialization part here */
|
||||
void __init spear3xx_init(void)
|
||||
{
|
||||
/* nothing to do for now */
|
||||
}
|
||||
|
||||
/* This will initialize vic */
|
||||
void __init spear3xx_init_irq(void)
|
||||
{
|
||||
vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
|
||||
}
|
||||
|
||||
/* Following will create static virtual/physical mappings */
|
||||
struct map_desc spear3xx_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
|
||||
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
|
||||
.length = SZ_4K,
|
||||
.type = MT_DEVICE
|
||||
}, {
|
||||
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
|
||||
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
|
||||
.length = SZ_4K,
|
||||
.type = MT_DEVICE
|
||||
}, {
|
||||
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
|
||||
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
|
||||
.length = SZ_4K,
|
||||
.type = MT_DEVICE
|
||||
}, {
|
||||
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
|
||||
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
|
||||
.length = SZ_4K,
|
||||
.type = MT_DEVICE
|
||||
},
|
||||
};
|
||||
|
||||
/* This will create static memory mapping for selected devices */
|
||||
void __init spear3xx_map_io(void)
|
||||
{
|
||||
iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
|
||||
|
||||
/* This will initialize clock framework */
|
||||
spear3xx_clk_init();
|
||||
}
|
||||
|
||||
/* pad multiplexing support */
|
||||
/* devices */
|
||||
static struct pmx_dev_mode pmx_firda_modes[] = {
|
||||
|
|
@ -508,6 +446,51 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
|
|||
};
|
||||
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
|
||||
|
||||
/* ssp device registration */
|
||||
struct pl022_ssp_controller pl022_plat_data = {
|
||||
.bus_id = 0,
|
||||
.enable_dma = 1,
|
||||
.dma_filter = pl08x_filter_id,
|
||||
.dma_tx_param = "ssp0_tx",
|
||||
.dma_rx_param = "ssp0_rx",
|
||||
/*
|
||||
* This is number of spi devices that can be connected to spi. There are
|
||||
* two type of chipselects on which slave devices can work. One is chip
|
||||
* select provided by spi masters other is controlled through external
|
||||
* gpio's. We can't use chipselect provided from spi master (because as
|
||||
* soon as FIFO becomes empty, CS is disabled and transfer ends). So
|
||||
* this number now depends on number of gpios available for spi. each
|
||||
* slave on each master requires a separate gpio pin.
|
||||
*/
|
||||
.num_chipselect = 2,
|
||||
};
|
||||
|
||||
/*
|
||||
* Following will create 16MB static virtual/physical mappings
|
||||
* PHYSICAL VIRTUAL
|
||||
* 0xD0000000 0xFD000000
|
||||
* 0xFC000000 0xFC000000
|
||||
*/
|
||||
struct map_desc spear3xx_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = VA_SPEAR3XX_ICM1_2_BASE,
|
||||
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
|
||||
.length = SZ_16M,
|
||||
.type = MT_DEVICE
|
||||
}, {
|
||||
.virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
|
||||
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
|
||||
.length = SZ_16M,
|
||||
.type = MT_DEVICE
|
||||
},
|
||||
};
|
||||
|
||||
/* This will create static memory mapping for selected devices */
|
||||
void __init spear3xx_map_io(void)
|
||||
{
|
||||
iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
|
||||
}
|
||||
|
||||
static void __init spear3xx_timer_init(void)
|
||||
{
|
||||
char pclk_name[] = "pll3_48m_clk";
|
||||
|
|
@ -538,3 +521,13 @@ static void __init spear3xx_timer_init(void)
|
|||
struct sys_timer spear3xx_timer = {
|
||||
.init = spear3xx_timer_init,
|
||||
};
|
||||
|
||||
static const struct of_device_id vic_of_match[] __initconst = {
|
||||
{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
|
||||
{ /* Sentinel */ }
|
||||
};
|
||||
|
||||
void __init spear3xx_dt_init_irq(void)
|
||||
{
|
||||
of_irq_init(vic_of_match);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -9,9 +9,10 @@ choice
|
|||
default ARCH_SPEAR3XX
|
||||
|
||||
config ARCH_SPEAR3XX
|
||||
bool "SPEAr3XX"
|
||||
bool "ST SPEAr3xx with Device Tree"
|
||||
select ARM_VIC
|
||||
select CPU_ARM926T
|
||||
select USE_OF
|
||||
help
|
||||
Supports for ARM's SPEAR3XX family
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue