redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: sun7i: Enable mmc controller on various A20 boards 

The cd pin settings have been taken from the original firmware fex files,
and have been confirmed to work on the actual boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
hifive-unleashed-5.1
Hans de Goede 2014-05-02 17:57:28 +02:00 committed by Maxime Ripard
parent 11fbedf4dd
commit c621183c20
3 changed files with 43 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
View File

@ -20,6 +20,15 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
status = "okay";
};
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

9
arch/arm/boot/dts/sun7i-a20-cubietruck.dts
View File

@ -20,6 +20,15 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
status = "okay";
};
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

25
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
View File

@ -31,6 +31,24 @@
status = "okay";
};
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
status = "okay";
};
mmc3: mmc@01c12000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
bus-width = <4>;
cd-gpios = <&pio 7 11 0>; /* PH11 */
cd-inverted;
status = "okay";
};
usbphy: phy@01c13400 {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
@ -65,6 +83,13 @@
};
pinctrl@01c20800 {
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
allwinner,pins = "PH11";
allwinner,function = "gpio_in";
allwinner,drive = <0>;
allwinner,pull = <1>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";