redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

iio: bmg160: Use i2c regmap instead of direct i2c access 

This patch introduces regmap usage into the driver. This is done to
later easily support the SPI interface of this chip.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
hifive-unleashed-5.1
Markus Pargmann 2015-08-12 16:50:04 +02:00 committed by Jonathan Cameron
parent 8548a63b37
commit c6c9e995bc
2 changed files with 88 additions and 111 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/iio/gyro/Kconfig
View File

@ -55,6 +55,7 @@ config BMG160
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
help
Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
driver. This driver also supports BMI055 gyroscope.

198
drivers/iio/gyro/bmg160.c
View File

@ -28,6 +28,7 @@
#include <linux/iio/events.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/regmap.h>
#define BMG160_DRV_NAME "bmg160"
#define BMG160_IRQ_NAME "bmg160_event"
@ -98,6 +99,7 @@
struct bmg160_data {
struct i2c_client *client;
struct regmap *regmap;
struct iio_trigger *dready_trig;
struct iio_trigger *motion_trig;
struct mutex mutex;
@ -134,12 +136,17 @@ static const struct {
{ 133, BMG160_RANGE_250DPS},
{ 66, BMG160_RANGE_125DPS} };
static struct regmap_config bmg160_regmap_i2c_conf = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x3f
};
static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
{
int ret;
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_PMU_LPW, mode);
ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n");
return ret;
@ -169,8 +176,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
if (bw_bits < 0)
return bw_bits;
ret = i2c_smbus_write_byte_data(data->client, BMG160_REG_PMU_BW,
bw_bits);
ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_pmu_bw\n");
return ret;
@ -184,16 +190,17 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
static int bmg160_chip_init(struct bmg160_data *data)
{
int ret;
unsigned int val;
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_CHIP_ID);
ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_chip_id\n");
return ret;
}
dev_dbg(&data->client->dev, "Chip Id %x\n", ret);
if (ret != BMG160_CHIP_ID_VAL) {
dev_err(&data->client->dev, "invalid chip %x\n", ret);
dev_dbg(&data->client->dev, "Chip Id %x\n", val);
if (val != BMG160_CHIP_ID_VAL) {
dev_err(&data->client->dev, "invalid chip %x\n", val);
return -ENODEV;
}
@ -210,40 +217,31 @@ static int bmg160_chip_init(struct bmg160_data *data)
return ret;
/* Set Default Range */
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_RANGE,
BMG160_RANGE_500DPS);
ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_range\n");
return ret;
}
data->dps_range = BMG160_RANGE_500DPS;
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_SLOPE_THRES);
ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_slope_thres\n");
return ret;
}
data->slope_thres = ret;
data->slope_thres = val;
/* Set default interrupt mode */
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_EN_1);
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
BMG160_INT1_BIT_OD, 0);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_int_en_1\n");
return ret;
}
ret &= ~BMG160_INT1_BIT_OD;
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_EN_1, ret);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_en_1\n");
dev_err(&data->client->dev, "Error updating bits in reg_int_en_1\n");
return ret;
}
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_motion_intr\n");
@ -284,41 +282,28 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
int ret;
/* Enable/Disable INT_MAP0 mapping */
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_MAP_0);
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_0,
BMG160_INT_MAP_0_BIT_ANY,
(status ? BMG160_INT_MAP_0_BIT_ANY : 0));
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_int_map0\n");
return ret;
}
if (status)
ret |= BMG160_INT_MAP_0_BIT_ANY;
else
ret &= ~BMG160_INT_MAP_0_BIT_ANY;
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_MAP_0,
ret);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_map0\n");
dev_err(&data->client->dev, "Error updating bits reg_int_map0\n");
return ret;
}
/* Enable/Disable slope interrupts */
if (status) {
/* Update slope thres */
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_SLOPE_THRES,
data->slope_thres);
ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
data->slope_thres);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_slope_thres\n");
return ret;
}
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_MOTION_INTR,
BMG160_INT_MOTION_X |
BMG160_INT_MOTION_Y |
BMG160_INT_MOTION_Z);
ret = regmap_write(data->regmap, BMG160_REG_MOTION_INTR,
BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
BMG160_INT_MOTION_Z);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_motion_intr\n");
@ -331,10 +316,10 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
* to set latched mode, we will be flooded anyway with INTR
*/
if (!data->dready_trigger_on) {
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
ret = regmap_write(data->regmap,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_rst_latch\n");
@ -342,14 +327,12 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
}
}
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_EN_0,
BMG160_DATA_ENABLE_INT);
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
BMG160_DATA_ENABLE_INT);
} else
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_EN_0,
0);
} else {
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
}
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_en0\n");
@ -365,55 +348,39 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
int ret;
/* Enable/Disable INT_MAP1 mapping */
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_MAP_1);
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_1,
BMG160_INT_MAP_1_BIT_NEW_DATA,
(status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_int_map1\n");
return ret;
}
if (status)
ret |= BMG160_INT_MAP_1_BIT_NEW_DATA;
else
ret &= ~BMG160_INT_MAP_1_BIT_NEW_DATA;
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_MAP_1,
ret);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_map1\n");
dev_err(&data->client->dev, "Error updating bits in reg_int_map1\n");
return ret;
}
if (status) {
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_NON_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_NON_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_rst_latch\n");
return ret;
}
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_EN_0,
BMG160_DATA_ENABLE_INT);
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
BMG160_DATA_ENABLE_INT);
} else {
/* Restore interrupt mode */
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_rst_latch\n");
return ret;
}
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_EN_0,
0);
ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
}
if (ret < 0) {
@ -444,10 +411,8 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
if (bmg160_scale_table[i].scale == val) {
ret = i2c_smbus_write_byte_data(
data->client,
BMG160_REG_RANGE,
bmg160_scale_table[i].dps_range);
ret = regmap_write(data->regmap, BMG160_REG_RANGE,
bmg160_scale_table[i].dps_range);
if (ret < 0) {
dev_err(&data->client->dev,
"Error writing reg_range\n");
@ -464,6 +429,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
static int bmg160_get_temp(struct bmg160_data *data, int *val)
{
int ret;
unsigned int raw_val;
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
@ -472,7 +438,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
return ret;
}
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_TEMP);
ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_temp\n");
bmg160_set_power_state(data, false);
@ -480,7 +446,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
return ret;
}
*val = sign_extend32(ret, 7);
*val = sign_extend32(raw_val, 7);
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
if (ret < 0)
@ -492,6 +458,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
{
int ret;
unsigned int raw_val;
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
@ -500,7 +467,8 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
return ret;
}
ret = i2c_smbus_read_word_data(data->client, BMG160_AXIS_TO_REG(axis));
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
2);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading axis %d\n", axis);
bmg160_set_power_state(data, false);
@ -508,7 +476,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
return ret;
}
*val = sign_extend32(ret, 15);
*val = sign_extend32(raw_val, 15);
ret = bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
if (ret < 0)
@ -807,12 +775,13 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p)
struct iio_dev *indio_dev = pf->indio_dev;
struct bmg160_data *data = iio_priv(indio_dev);
int bit, ret, i = 0;
unsigned int val;
mutex_lock(&data->mutex);
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength) {
ret = i2c_smbus_read_word_data(data->client,
BMG160_AXIS_TO_REG(bit));
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(bit),
&val, 2);
if (ret < 0) {
mutex_unlock(&data->mutex);
goto err;
@ -840,10 +809,9 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
return 0;
/* Set latched mode interrupt and clear any latched interrupt */
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_rst_latch\n");
return ret;
@ -907,33 +875,34 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
struct bmg160_data *data = iio_priv(indio_dev);
int ret;
int dir;
unsigned int val;
ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_STATUS_2);
ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_int_status2\n");
goto ack_intr_status;
}
if (ret & 0x08)
if (val & 0x08)
dir = IIO_EV_DIR_RISING;
else
dir = IIO_EV_DIR_FALLING;
if (ret & BMG160_ANY_MOTION_BIT_X)
if (val & BMG160_ANY_MOTION_BIT_X)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
IIO_MOD_X,
IIO_EV_TYPE_ROC,
dir),
iio_get_time_ns());
if (ret & BMG160_ANY_MOTION_BIT_Y)
if (val & BMG160_ANY_MOTION_BIT_Y)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
IIO_MOD_Y,
IIO_EV_TYPE_ROC,
dir),
iio_get_time_ns());
if (ret & BMG160_ANY_MOTION_BIT_Z)
if (val & BMG160_ANY_MOTION_BIT_Z)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
IIO_MOD_Z,
@ -943,10 +912,9 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
ack_intr_status:
if (!data->dready_trigger_on) {
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0)
dev_err(&data->client->dev,
"Error writing reg_rst_latch\n");
@ -1038,6 +1006,14 @@ static int bmg160_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
int ret;
const char *name = NULL;
struct regmap *regmap;
regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to register i2c regmap %d\n",
(int)PTR_ERR(regmap));
return PTR_ERR(regmap);
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)