Documentation: rapidio: move sysfs interface to ABI
Right now, the description of the rapidio sysfs interfaces is in Documentation/rapidio/sysfs.txt. Since these are a part of the ABI, they should be in Documentation/ABI along with the rest. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>hifive-unleashed-5.1
Aishwarya Pant
Jonathan Corbet
parent
e55ee9349f
commit
c7899551ff
|
|
@ -0,0 +1,198 @@
|
|||
What: /sys/bus/rapidio/devices/nn:d:iiii
|
||||
Description:
|
||||
For each RapidIO device, the RapidIO subsystem creates files in
|
||||
an individual subdirectory with the following name format of
|
||||
device_name "nn:d:iiii", where:
|
||||
|
||||
nn - two-digit hexadecimal ID of RapidIO network where the
|
||||
device resides
|
||||
d - device type: 'e' - for endpoint or 's' - for switch
|
||||
iiii - four-digit device destID for endpoints, or switchID for
|
||||
switches
|
||||
|
||||
For example, below is a list of device directories that
|
||||
represents a typical RapidIO network with one switch, one host,
|
||||
and two agent endpoints, as it is seen by the enumerating host
|
||||
(with destID = 1):
|
||||
|
||||
/sys/bus/rapidio/devices/00:e:0000
|
||||
/sys/bus/rapidio/devices/00:e:0002
|
||||
/sys/bus/rapidio/devices/00:s:0001
|
||||
|
||||
NOTE: An enumerating or discovering endpoint does not create a
|
||||
sysfs entry for itself, this is why an endpoint with destID=1 is
|
||||
not shown in the list.
|
||||
|
||||
Attributes Common for All RapidIO Devices
|
||||
-----------------------------------------
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/did
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns the device identifier
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/vid
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns the device vendor identifier
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/device_rev
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns the device revision level
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/asm_did
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns identifier for the assembly containing the device
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/asm_rev
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns revision level of the assembly containing the
|
||||
device
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/asm_vid
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns vendor identifier of the assembly containing the
|
||||
device
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/destid
|
||||
Date: Mar, 2011
|
||||
KernelVersion: v2.6.3
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns device destination ID assigned by the enumeration
|
||||
routine
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/lprev
|
||||
Date: Mar, 2011
|
||||
KernelVersion: v2.6.39
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns name of previous device (switch) on the path to the
|
||||
device that that owns this attribute
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/modalias
|
||||
Date: Jul, 2013
|
||||
KernelVersion: v3.11
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns the device modalias
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:d:iiii/config
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RW) Binary attribute to read from and write to the device
|
||||
configuration registers using the RapidIO maintenance
|
||||
transactions. This attribute is similar in behaviour to the
|
||||
"config" attribute of PCI devices and provides an access to the
|
||||
RapidIO device registers using standard file read and write
|
||||
operations.
|
||||
|
||||
RapidIO Switch Device Attributes
|
||||
--------------------------------
|
||||
|
||||
RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports
|
||||
common and device-specific sysfs attributes for switches. Because switches are
|
||||
integrated into the RapidIO subsystem, it offers a method to create
|
||||
device-specific sysfs attributes by specifying a callback function that may be
|
||||
set by the switch initialization routine during enumeration or discovery
|
||||
process.
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:s:iiii/routes
|
||||
Date: Nov, 2005
|
||||
KernelVersion: v2.6.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) reports switch routing information in "destID port" format.
|
||||
This attribute reports only valid routing table entries, one
|
||||
line for each entry.
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:s:iiii/destid
|
||||
Date: Mar, 2011
|
||||
KernelVersion: v2.6.3
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) device destination ID of the associated device that defines
|
||||
a route to the switch
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:s:iiii/hopcount
|
||||
Date: Mar, 2011
|
||||
KernelVersion: v2.6.39
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) number of hops on the path to the switch
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:s:iiii/lnext
|
||||
Date: Mar, 2011
|
||||
KernelVersion: v2.6.39
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) returns names of devices linked to the switch except one of
|
||||
a device linked to the ingress port (reported as "lprev"). This
|
||||
is an array names with number of lines equal to number of ports
|
||||
in switch. If a switch port has no attached device, returns
|
||||
"null" instead of a device name.
|
||||
|
||||
Device-specific Switch Attributes
|
||||
---------------------------------
|
||||
|
||||
IDT_GEN2-
|
||||
|
||||
What: /sys/bus/rapidio/devices/nn:s:iiii/errlog
|
||||
Date: Oct, 2010
|
||||
KernelVersion: v2.6.37
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) reads contents of device error log until it is empty.
|
||||
|
||||
RapidIO Bus Attributes
|
||||
----------------------
|
||||
|
||||
What: /sys/bus/rapidio/scan
|
||||
Date: May, 2013
|
||||
KernelVersion: v3.11
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(WO) Allows to trigger enumeration discovery process from user
|
||||
space. To initiate an enumeration or discovery process on
|
||||
specific mport device, a user needs to write mport_ID (not
|
||||
RapidIO destination ID) into this file. The mport_ID is a
|
||||
sequential number (0 ... RIO_MAX_MPORTS) assigned to the mport
|
||||
device. For example, for a machine with a single RapidIO
|
||||
controller, mport_ID for that controller always will be 0. To
|
||||
initiate RapidIO enumeration/discovery on all available mports a
|
||||
user must write '-1' (or RIO_MPORT_ANY) into this attribute
|
||||
file.
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
What: /sys/class/rapidio_port
|
||||
Description:
|
||||
On-chip RapidIO controllers and PCIe-to-RapidIO bridges
|
||||
(referenced as "Master Port" or "mport") are presented in sysfs
|
||||
as the special class of devices: "rapidio_port".
|
||||
The /sys/class/rapidio_port subdirectory contains individual
|
||||
subdirectories named as "rapidioN" where N = mport ID registered
|
||||
with RapidIO subsystem.
|
||||
NOTE: An mport ID is not a RapidIO destination ID assigned to a
|
||||
given local mport device.
|
||||
|
||||
What: /sys/class/rapidio_port/rapidioN/sys_size
|
||||
Date: Apr, 2014
|
||||
KernelVersion: v3.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) reports RapidIO common transport system size:
|
||||
0 = small (8-bit destination ID, max. 256 devices),
|
||||
1 = large (16-bit destination ID, max. 65536 devices).
|
||||
|
||||
What: /sys/class/rapidio_port/rapidioN/port_destid
|
||||
Date: Apr, 2014
|
||||
KernelVersion: v3.15
|
||||
Contact: Matt Porter <mporter@kernel.crashing.org>,
|
||||
Alexandre Bounine <alexandre.bounine@idt.com>
|
||||
Description:
|
||||
(RO) reports RapidIO destination ID assigned to the given
|
||||
RapidIO mport device. If value 0xFFFFFFFF is returned this means
|
||||
that no valid destination ID have been assigned to the mport
|
||||
(yet). Normally, before enumeration/discovery have been executed
|
||||
only fabric enumerating mports have a valid destination ID
|
||||
assigned to them using "hdid=..." rapidio module parameter.
|
||||
|
||||
After enumeration or discovery was performed for a given mport device,
|
||||
the corresponding subdirectory will also contain subdirectories for each
|
||||
child RapidIO device connected to the mport.
|
||||
|
||||
The example below shows mport device subdirectory with several child RapidIO
|
||||
devices attached to it.
|
||||
|
||||
[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
|
||||
total 0
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005
|
||||
lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0
|
||||
-r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
|
||||
drwxr-xr-x 2 root root 0 Feb 11 15:11 power
|
||||
lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
|
||||
-r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
|
||||
-rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
|
||||
|
|
@ -1,158 +1,3 @@
|
|||
RapidIO sysfs Files
|
||||
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
1. RapidIO Device Subdirectories
|
||||
--------------------------------
|
||||
|
||||
For each RapidIO device, the RapidIO subsystem creates files in an individual
|
||||
subdirectory with the following name, /sys/bus/rapidio/devices/<device_name>.
|
||||
|
||||
The format of device_name is "nn:d:iiii", where:
|
||||
|
||||
nn - two-digit hexadecimal ID of RapidIO network where the device resides
|
||||
d - device typr: 'e' - for endpoint or 's' - for switch
|
||||
iiii - four-digit device destID for endpoints, or switchID for switches
|
||||
|
||||
For example, below is a list of device directories that represents a typical
|
||||
RapidIO network with one switch, one host, and two agent endpoints, as it is
|
||||
seen by the enumerating host (destID = 1):
|
||||
|
||||
/sys/bus/rapidio/devices/00:e:0000
|
||||
/sys/bus/rapidio/devices/00:e:0002
|
||||
/sys/bus/rapidio/devices/00:s:0001
|
||||
|
||||
NOTE: An enumerating or discovering endpoint does not create a sysfs entry for
|
||||
itself, this is why an endpoint with destID=1 is not shown in the list.
|
||||
|
||||
2. Attributes Common for All RapidIO Devices
|
||||
--------------------------------------------
|
||||
|
||||
Each device subdirectory contains the following informational read-only files:
|
||||
|
||||
did - returns the device identifier
|
||||
vid - returns the device vendor identifier
|
||||
device_rev - returns the device revision level
|
||||
asm_did - returns identifier for the assembly containing the device
|
||||
asm_rev - returns revision level of the assembly containing the device
|
||||
asm_vid - returns vendor identifier of the assembly containing the device
|
||||
destid - returns device destination ID assigned by the enumeration routine
|
||||
(see 4.1 for switch specific details)
|
||||
lprev - returns name of previous device (switch) on the path to the device
|
||||
that that owns this attribute
|
||||
modalias - returns the device modalias
|
||||
|
||||
In addition to the files listed above, each device has a binary attribute file
|
||||
that allows read/write access to the device configuration registers using
|
||||
the RapidIO maintenance transactions:
|
||||
|
||||
config - reads from and writes to the device configuration registers.
|
||||
|
||||
This attribute is similar in behavior to the "config" attribute of PCI devices
|
||||
and provides an access to the RapidIO device registers using standard file read
|
||||
and write operations.
|
||||
|
||||
3. RapidIO Endpoint Device Attributes
|
||||
-------------------------------------
|
||||
|
||||
Currently Linux RapidIO subsystem does not create any endpoint specific sysfs
|
||||
attributes. It is possible that RapidIO master port drivers and endpoint device
|
||||
drivers will add their device-specific sysfs attributes but such attributes are
|
||||
outside the scope of this document.
|
||||
|
||||
4. RapidIO Switch Device Attributes
|
||||
-----------------------------------
|
||||
|
||||
RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports
|
||||
common and device-specific sysfs attributes for switches. Because switches are
|
||||
integrated into the RapidIO subsystem, it offers a method to create
|
||||
device-specific sysfs attributes by specifying a callback function that may be
|
||||
set by the switch initialization routine during enumeration or discovery process.
|
||||
|
||||
4.1 Common Switch Attributes
|
||||
|
||||
routes - reports switch routing information in "destID port" format. This
|
||||
attribute reports only valid routing table entries, one line for
|
||||
each entry.
|
||||
destid - device destination ID that defines a route to the switch
|
||||
hopcount - number of hops on the path to the switch
|
||||
lnext - returns names of devices linked to the switch except one of a device
|
||||
linked to the ingress port (reported as "lprev"). This is an array
|
||||
names with number of lines equal to number of ports in switch. If
|
||||
a switch port has no attached device, returns "null" instead of
|
||||
a device name.
|
||||
|
||||
4.2 Device-specific Switch Attributes
|
||||
|
||||
Device-specific switch attributes are listed for each RapidIO switch driver
|
||||
that exports additional attributes.
|
||||
|
||||
IDT_GEN2:
|
||||
errlog - reads contents of device error log until it is empty.
|
||||
|
||||
|
||||
5. RapidIO Bus Attributes
|
||||
-------------------------
|
||||
|
||||
RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific
|
||||
attribute:
|
||||
|
||||
scan - allows to trigger enumeration discovery process from user space. This
|
||||
is a write-only attribute. To initiate an enumeration or discovery
|
||||
process on specific mport device, a user needs to write mport_ID (not
|
||||
RapidIO destination ID) into this file. The mport_ID is a sequential
|
||||
number (0 ... RIO_MAX_MPORTS) assigned to the mport device.
|
||||
For example, for a machine with a single RapidIO controller, mport_ID
|
||||
for that controller always will be 0.
|
||||
To initiate RapidIO enumeration/discovery on all available mports
|
||||
a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.
|
||||
|
||||
|
||||
6. RapidIO Bus Controllers/Ports
|
||||
--------------------------------
|
||||
|
||||
On-chip RapidIO controllers and PCIe-to-RapidIO bridges (referenced as
|
||||
"Master Port" or "mport") are presented in sysfs as the special class of
|
||||
devices: "rapidio_port".
|
||||
|
||||
The /sys/class/rapidio_port subdirectory contains individual subdirectories
|
||||
named as "rapidioN" where N = mport ID registered with RapidIO subsystem.
|
||||
|
||||
NOTE: An mport ID is not a RapidIO destination ID assigned to a given local
|
||||
mport device.
|
||||
|
||||
Each mport device subdirectory in addition to standard entries contains the
|
||||
following device-specific attributes:
|
||||
|
||||
port_destid - reports RapidIO destination ID assigned to the given RapidIO
|
||||
mport device. If value 0xFFFFFFFF is returned this means that
|
||||
no valid destination ID have been assigned to the mport (yet).
|
||||
Normally, before enumeration/discovery have been executed only
|
||||
fabric enumerating mports have a valid destination ID assigned
|
||||
to them using "hdid=..." rapidio module parameter.
|
||||
sys_size - reports RapidIO common transport system size:
|
||||
0 = small (8-bit destination ID, max. 256 devices),
|
||||
1 = large (16-bit destination ID, max. 65536 devices).
|
||||
|
||||
After enumeration or discovery was performed for a given mport device,
|
||||
the corresponding subdirectory will also contain subdirectories for each
|
||||
child RapidIO device connected to the mport. Naming conventions for RapidIO
|
||||
devices are described in Section 1 above.
|
||||
|
||||
The example below shows mport device subdirectory with several child RapidIO
|
||||
devices attached to it.
|
||||
|
||||
[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
|
||||
total 0
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003
|
||||
drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005
|
||||
lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0
|
||||
-r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
|
||||
drwxr-xr-x 2 root root 0 Feb 11 15:11 power
|
||||
lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
|
||||
-r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
|
||||
-rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
|
||||
The RapidIO sysfs files have moved to:
|
||||
Documentation/ABI/testing/sysfs-bus-rapidio and
|
||||
Documentation/ABI/testing/sysfs-class-rapidio
|
||||
|
|
|
|||
Loading…
Reference in New Issue