diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index f1d91ba5d1ac..cdc4fb9960a9 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { REGULATOR_SUPPLY("vcc", "spi2.0"), }; -static struct panel_generic_dpi_data lcd_panel = { - .name = "innolux_at070tn83", - /* gpios filled in code */ +static const struct display_timing devkit8000_lcd_videomode = { + .pixelclock = { 0, 40000000, 0 }, + + .hactive = { 0, 800, 0 }, + .hfront_porch = { 0, 1, 0 }, + .hback_porch = { 0, 1, 0 }, + .hsync_len = { 0, 48, 0 }, + + .vactive = { 0, 480, 0 }, + .vfront_porch = { 0, 12, 0 }, + .vback_porch = { 0, 25, 0 }, + .vsync_len = { 0, 3, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device devkit8000_lcd_device = { +static struct panel_dpi_platform_data devkit8000_lcd_pdata = { .name = "lcd", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 24, + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &devkit8000_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = 1, +static struct platform_device devkit8000_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &devkit8000_lcd_pdata, }; -static struct omap_dss_device devkit8000_dvi_device = { +static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, + .source = "tfp410.0", + .i2c_bus_num = 1, }; -static struct omap_dss_device devkit8000_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device devkit8000_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &devkit8000_dvi_connector_pdata, }; +static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, /* filled in code */ +}; -static struct omap_dss_device *devkit8000_dss_devices[] = { - &devkit8000_lcd_device, - &devkit8000_dvi_device, - &devkit8000_tv_device, +static struct platform_device devkit8000_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &devkit8000_tfp410_pdata, +}; + +static struct connector_atv_platform_data devkit8000_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device devkit8000_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &devkit8000_tv_pdata, }; static struct omap_dss_board_info devkit8000_dss_data = { - .num_devices = ARRAY_SIZE(devkit8000_dss_devices), - .devices = devkit8000_dss_devices, - .default_device = &devkit8000_lcd_device, + .default_display_name = "lcd", }; static uint32_t board_keymap[] = { @@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev, gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - lcd_panel.num_gpios = 1; - lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0; + devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ - dvi_panel.power_down_gpio = gpio + 7; + devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; return 0; } @@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = { &leds_gpio, &keys_gpio, &omap_dm9000_dev, + &devkit8000_lcd_device, + &devkit8000_tfp410_device, + &devkit8000_dvi_connector_device, + &devkit8000_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = {