From eac27f04a71e1f39f196f7e520d16dcefc955d77 Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 11 Jul 2013 21:15:57 -0400 Subject: [PATCH 1/7] ata: Fix DVD not dectected at some platform with Wellsburg PCH There is a patch b55f84e2d527182e7c611d466cd0bb6ddce201de "ata_piix: Fix DVD not dectected at some Haswell platforms" to fix an issue of DVD not recognized on Haswell Desktop platform with Lynx Point. Recently, it is also found the same issue at some platformas with Wellsburg PCH. So deliver a similar patch to fix it by disables 32bit PIO in IDE mode. Signed-off-by: Youquan Song Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b52a10c8eeb9..513ad7ed0c99 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -330,7 +330,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ - { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ From 42b9ab7ab798c1fc812bd2032cb506a93080130f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 19 Jul 2013 15:56:41 +0900 Subject: [PATCH 2/7] libata: replace strict_strtol() with kstrtol() The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han Signed-off-by: Tejun Heo --- drivers/ata/libata-scsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 83c08907e042..b1e880a3c3da 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -206,8 +206,10 @@ static ssize_t ata_scsi_park_store(struct device *device, unsigned long flags; int rc; - rc = strict_strtol(buf, 10, &input); - if (rc || input < -2) + rc = kstrtol(buf, 10, &input); + if (rc) + return rc; + if (input < -2) return -EINVAL; if (input > ATA_TMOUT_MAX_PARK) { rc = -EOVERFLOW; From bb9696192826a7d9279caf872e95b41bc26c7eff Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 22 Jul 2013 16:53:36 -0400 Subject: [PATCH 3/7] libata: make it clear that sata_inic162x is experimental sata_inic162x never reached a state where it's reliable enough for production use and data corruption is a relatively common occurrence. Make the driver generate warning about the issues and mark the Kconfig option as experimental. If the situation doesn't improve, we'd be better off making it depend on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel message draws any attention. Signed-off-by: Tejun Heo Reported-by: Martin Braure de Calignon Reported-by: Ben Hutchings Reported-by: risc4all@yahoo.com --- drivers/ata/Kconfig | 2 +- drivers/ata/sata_inic162x.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 80dc988f01e4..5cddaf86cd0a 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -107,7 +107,7 @@ config SATA_FSL If unsure, say N. config SATA_INIC162X - tristate "Initio 162x SATA support" + tristate "Initio 162x SATA support (Very Experimental)" depends on PCI help This option enables support for Initio 162x Serial ATA. diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index e45131748248..5c54d957370a 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -6,6 +6,18 @@ * * This file is released under GPL v2. * + * **** WARNING **** + * + * This driver never worked properly and unfortunately data corruption is + * relatively common. There isn't anyone working on the driver and there's + * no support from the vendor. Do not use this driver in any production + * environment. + * + * http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491 + * https://bugzilla.kernel.org/show_bug.cgi?id=60565 + * + * ***************** + * * This controller is eccentric and easily locks up if something isn't * right. Documentation is available at initio's website but it only * documents registers (not programming model). @@ -807,6 +819,8 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_print_version_once(&pdev->dev, DRV_VERSION); + dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n"); + /* alloc host */ host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); From c91bc6ccd13254826fdfceddba0f3b5e308aa93e Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 23 Jul 2013 11:54:10 +0800 Subject: [PATCH 4/7] ahci: fix Null pointer dereference in achi_host_active() commit b29900e6 (AHCI: Make distinct names for ports in /proc/interrupts) introuded a regression, which resulted Null pointer dereference for achi host with dummy ports. For ahci ports, when the port is dummy port, its private_data will be NULL, as ata_dummy_port_ops doesn't support ->port_start. changes in v2: use pp to check dummy ports, update comments Reported-and-tested-by: Alex Williamson Signed-off-by: Xiaotian Feng Signed-off-by: Tejun Heo Cc: Alexander Gordeev Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- drivers/ata/ahci.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5064f3ea20f1..db4380d70031 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1146,11 +1146,18 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis) return rc; for (i = 0; i < host->n_ports; i++) { + const char* desc; struct ahci_port_priv *pp = host->ports[i]->private_data; + /* pp is NULL for dummy ports */ + if (pp) + desc = pp->irq_desc; + else + desc = dev_driver_string(host->dev); + rc = devm_request_threaded_irq(host->dev, irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED, - pp->irq_desc, host->ports[i]); + desc, host->ports[i]); if (rc) goto out_free_irqs; } From 6a6c21ef487be47b300a0b24cd6afeb69d8b9a1a Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Wed, 24 Jul 2013 14:15:28 +0800 Subject: [PATCH 5/7] ARM: imx6q: update the sata bits definitions of gpr13 Replace the SATA_PHY_# by the more readable definitons. tj: Being routed through libata branch to enable implementation of ahci_imx. Signed-off-by: Richard Zhu Acked-by: Shawn Guo Signed-off-by: Tejun Heo --- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 121 ++++++++++++++------ 1 file changed, 84 insertions(+), 37 deletions(-) diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index dab34a1deb2c..e235251f1ba9 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -279,41 +279,88 @@ #define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29) #define IMX6Q_GPR13_CAN1_STOP_REQ BIT(28) #define IMX6Q_GPR13_ENET_STOP_REQ BIT(27) -#define IMX6Q_GPR13_SATA_PHY_8_MASK (0x7 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_0_5_DB (0x0 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_1_0_DB (0x1 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_1_5_DB (0x2 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_2_0_DB (0x3 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_2_5_DB (0x4 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_3_0_DB (0x5 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_3_5_DB (0x6 << 24) -#define IMX6Q_GPR13_SATA_PHY_8_4_0_DB (0x7 << 24) -#define IMX6Q_GPR13_SATA_PHY_7_MASK (0x1f << 19) -#define IMX6Q_GPR13_SATA_PHY_7_SATA1I (0x10 << 19) -#define IMX6Q_GPR13_SATA_PHY_7_SATA1M (0x10 << 19) -#define IMX6Q_GPR13_SATA_PHY_7_SATA1X (0x1a << 19) -#define IMX6Q_GPR13_SATA_PHY_7_SATA2I (0x12 << 19) -#define IMX6Q_GPR13_SATA_PHY_7_SATA2M (0x12 << 19) -#define IMX6Q_GPR13_SATA_PHY_7_SATA2X (0x1a << 19) -#define IMX6Q_GPR13_SATA_PHY_6_MASK (0x7 << 16) -#define IMX6Q_GPR13_SATA_SPEED_MASK BIT(15) -#define IMX6Q_GPR13_SATA_SPEED_1P5G 0x0 -#define IMX6Q_GPR13_SATA_SPEED_3P0G BIT(15) -#define IMX6Q_GPR13_SATA_PHY_5 BIT(14) -#define IMX6Q_GPR13_SATA_PHY_4_MASK (0x7 << 11) -#define IMX6Q_GPR13_SATA_PHY_4_16_16 (0x0 << 11) -#define IMX6Q_GPR13_SATA_PHY_4_14_16 (0x1 << 11) -#define IMX6Q_GPR13_SATA_PHY_4_12_16 (0x2 << 11) -#define IMX6Q_GPR13_SATA_PHY_4_10_16 (0x3 << 11) -#define IMX6Q_GPR13_SATA_PHY_4_9_16 (0x4 << 11) -#define IMX6Q_GPR13_SATA_PHY_4_8_16 (0x5 << 11) -#define IMX6Q_GPR13_SATA_PHY_3_MASK (0xf << 7) -#define IMX6Q_GPR13_SATA_PHY_3_OFF 0x7 -#define IMX6Q_GPR13_SATA_PHY_2_MASK (0x1f << 2) -#define IMX6Q_GPR13_SATA_PHY_2_OFF 0x2 -#define IMX6Q_GPR13_SATA_PHY_1_MASK (0x3 << 0) -#define IMX6Q_GPR13_SATA_PHY_1_FAST (0x0 << 0) -#define IMX6Q_GPR13_SATA_PHY_1_MED (0x1 << 0) -#define IMX6Q_GPR13_SATA_PHY_1_SLOW (0x2 << 0) - +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK (0x7 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB (0x0 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB (0x1 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB (0x2 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB (0x3 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB (0x4 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB (0x5 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB (0x6 << 24) +#define IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB (0x7 << 24) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK (0x1f << 19) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1I (0x10 << 19) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1M (0x10 << 19) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1X (0x1a << 19) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2I (0x12 << 19) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M (0x12 << 19) +#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2X (0x1a << 19) +#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK (0x7 << 16) +#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_1F (0x0 << 16) +#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_2F (0x1 << 16) +#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_4F (0x2 << 16) +#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F (0x3 << 16) +#define IMX6Q_GPR13_SATA_SPD_MODE_MASK BIT(15) +#define IMX6Q_GPR13_SATA_SPD_MODE_1P5G 0x0 +#define IMX6Q_GPR13_SATA_SPD_MODE_3P0G BIT(15) +#define IMX6Q_GPR13_SATA_MPLL_SS_EN BIT(14) +#define IMX6Q_GPR13_SATA_TX_ATTEN_MASK (0x7 << 11) +#define IMX6Q_GPR13_SATA_TX_ATTEN_16_16 (0x0 << 11) +#define IMX6Q_GPR13_SATA_TX_ATTEN_14_16 (0x1 << 11) +#define IMX6Q_GPR13_SATA_TX_ATTEN_12_16 (0x2 << 11) +#define IMX6Q_GPR13_SATA_TX_ATTEN_10_16 (0x3 << 11) +#define IMX6Q_GPR13_SATA_TX_ATTEN_9_16 (0x4 << 11) +#define IMX6Q_GPR13_SATA_TX_ATTEN_8_16 (0x5 << 11) +#define IMX6Q_GPR13_SATA_TX_BOOST_MASK (0xf << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB (0x0 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB (0x1 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB (0x2 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB (0x3 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB (0x4 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB (0x5 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB (0x6 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB (0x7 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB (0x8 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB (0x9 << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB (0xa << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB (0xb << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB (0xc << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB (0xd << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB (0xe << 7) +#define IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB (0xf << 7) +#define IMX6Q_GPR13_SATA_TX_LVL_MASK (0x1f << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_937_V (0x00 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_947_V (0x01 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_957_V (0x02 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_966_V (0x03 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_976_V (0x04 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_986_V (0x05 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_0_996_V (0x06 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_005_V (0x07 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_015_V (0x08 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_025_V (0x09 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_035_V (0x0a << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_045_V (0x0b << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_054_V (0x0c << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_064_V (0x0d << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_074_V (0x0e << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_084_V (0x0f << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_094_V (0x10 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_104_V (0x11 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_113_V (0x12 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_123_V (0x13 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_133_V (0x14 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_143_V (0x15 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_152_V (0x16 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_162_V (0x17 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_172_V (0x18 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_182_V (0x19 << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_191_V (0x1a << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_201_V (0x1b << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_211_V (0x1c << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_221_V (0x1d << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_230_V (0x1e << 2) +#define IMX6Q_GPR13_SATA_TX_LVL_1_240_V (0x1f << 2) +#define IMX6Q_GPR13_SATA_MPLL_CLK_EN BIT(1) +#define IMX6Q_GPR13_SATA_TX_EDGE_RATE BIT(0) #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ From 9e54eae23bc9cca0d8a955018c35b1250e09a73a Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Wed, 24 Jul 2013 14:15:29 +0800 Subject: [PATCH 6/7] ahci_imx: add ahci sata support on imx platforms imx6q contains one Synopsys AHCI SATA controller, But it can't share ahci_platform driver with other controllers because there are some misalignments of the generic AHCI controller - the bits definitions of the HBA registers, the Vendor Specific registers, the AHCI PHY clock and the AHCI signals adjustment window(GPR13 register). - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0', should be configured to be '1' - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL should be set to be '1'.(default 0) - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be configured regarding to the frequency of AHB bus clock. - Configurations of the AHCI PHY clock, and the signal parameters of the GPR13 Setup its own ahci sata driver, contained the imx6q specific initialized codes, re-use the generic ahci_platform driver, and keep the generic ahci_platform driver clean as much as possible. tj: patch description reformatted Signed-off-by: Richard Zhu Reviewed-by: Shawn Guo Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 9 ++ drivers/ata/Makefile | 1 + drivers/ata/ahci_imx.c | 236 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+) create mode 100644 drivers/ata/ahci_imx.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5cddaf86cd0a..a4af0a2a089c 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM If unsure, say N. +config AHCI_IMX + tristate "Freescale i.MX AHCI SATA support" + depends on SATA_AHCI_PLATFORM + help + This option enables support for the Freescale i.MX SoC's + onboard AHCI SATA. + + If unsure, say N. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index c04d0fd038a3..46518c622460 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o +obj-$(CONFIG_AHCI_IMX) += ahci_imx.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c new file mode 100644 index 000000000000..58debb0acc3a --- /dev/null +++ b/drivers/ata/ahci_imx.c @@ -0,0 +1,236 @@ +/* + * Freescale IMX AHCI SATA platform driver + * Copyright 2013 Freescale Semiconductor, Inc. + * + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +enum { + HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ +}; + +struct imx_ahci_priv { + struct platform_device *ahci_pdev; + struct clk *sata_ref_clk; + struct clk *ahb_clk; + struct regmap *gpr; +}; + +static int imx6q_sata_init(struct device *dev, void __iomem *mmio) +{ + int ret = 0; + unsigned int reg_val; + struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); + + imxpriv->gpr = + syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (IS_ERR(imxpriv->gpr)) { + dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n"); + return PTR_ERR(imxpriv->gpr); + } + + ret = clk_prepare_enable(imxpriv->sata_ref_clk); + if (ret < 0) { + dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret); + return ret; + } + + /* + * set PHY Paremeters, two steps to configure the GPR13, + * one write for rest of parameters, mask of first write + * is 0x07fffffd, and the other one write for setting + * the mpll_clk_en. + */ + regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK + | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK + | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK + | IMX6Q_GPR13_SATA_SPD_MODE_MASK + | IMX6Q_GPR13_SATA_MPLL_SS_EN + | IMX6Q_GPR13_SATA_TX_ATTEN_MASK + | IMX6Q_GPR13_SATA_TX_BOOST_MASK + | IMX6Q_GPR13_SATA_TX_LVL_MASK + | IMX6Q_GPR13_SATA_TX_EDGE_RATE + , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB + | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M + | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F + | IMX6Q_GPR13_SATA_SPD_MODE_3P0G + | IMX6Q_GPR13_SATA_MPLL_SS_EN + | IMX6Q_GPR13_SATA_TX_ATTEN_9_16 + | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB + | IMX6Q_GPR13_SATA_TX_LVL_1_025_V); + regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, + IMX6Q_GPR13_SATA_MPLL_CLK_EN); + usleep_range(100, 200); + + /* + * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, + * and IP vendor specific register HOST_TIMER1MS. + * Configure CAP_SSS (support stagered spin up). + * Implement the port0. + * Get the ahb clock rate, and configure the TIMER1MS register. + */ + reg_val = readl(mmio + HOST_CAP); + if (!(reg_val & HOST_CAP_SSS)) { + reg_val |= HOST_CAP_SSS; + writel(reg_val, mmio + HOST_CAP); + } + reg_val = readl(mmio + HOST_PORTS_IMPL); + if (!(reg_val & 0x1)) { + reg_val |= 0x1; + writel(reg_val, mmio + HOST_PORTS_IMPL); + } + + reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; + writel(reg_val, mmio + HOST_TIMER1MS); + + return 0; +} + +static void imx6q_sata_exit(struct device *dev) +{ + struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); + + regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN, + !IMX6Q_GPR13_SATA_MPLL_CLK_EN); + clk_disable_unprepare(imxpriv->sata_ref_clk); +} + +static struct ahci_platform_data imx6q_sata_pdata = { + .init = imx6q_sata_init, + .exit = imx6q_sata_exit, +}; + +static const struct of_device_id imx_ahci_of_match[] = { + { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata}, + {}, +}; +MODULE_DEVICE_TABLE(of, imx_ahci_of_match); + +static int imx_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *mem, *irq, res[2]; + const struct of_device_id *of_id; + const struct ahci_platform_data *pdata = NULL; + struct imx_ahci_priv *imxpriv; + struct device *ahci_dev; + struct platform_device *ahci_pdev; + int ret; + + imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); + if (!imxpriv) { + dev_err(dev, "can't alloc ahci_host_priv\n"); + return -ENOMEM; + } + + ahci_pdev = platform_device_alloc("ahci", -1); + if (!ahci_pdev) + return -ENODEV; + + ahci_dev = &ahci_pdev->dev; + ahci_dev->parent = dev; + + imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(imxpriv->ahb_clk)) { + dev_err(dev, "can't get ahb clock.\n"); + ret = PTR_ERR(imxpriv->ahb_clk); + goto err_out; + } + + imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); + if (IS_ERR(imxpriv->sata_ref_clk)) { + dev_err(dev, "can't get sata_ref clock.\n"); + ret = PTR_ERR(imxpriv->sata_ref_clk); + goto err_out; + } + + imxpriv->ahci_pdev = ahci_pdev; + platform_set_drvdata(pdev, imxpriv); + + of_id = of_match_device(imx_ahci_of_match, dev); + if (of_id) { + pdata = of_id->data; + } else { + ret = -EINVAL; + goto err_out; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!mem || !irq) { + dev_err(dev, "no mmio/irq resource\n"); + ret = -ENOMEM; + goto err_out; + } + + res[0] = *mem; + res[1] = *irq; + + ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32); + ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask; + ahci_dev->of_node = dev->of_node; + + ret = platform_device_add_resources(ahci_pdev, res, 2); + if (ret) + goto err_out; + + ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata)); + if (ret) + goto err_out; + + ret = platform_device_add(ahci_pdev); + if (ret) { +err_out: + platform_device_put(ahci_pdev); + return ret; + } + + return 0; +} + +static int imx_ahci_remove(struct platform_device *pdev) +{ + struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev); + struct platform_device *ahci_pdev = imxpriv->ahci_pdev; + + platform_device_unregister(ahci_pdev); + return 0; +} + +static struct platform_driver imx_ahci_driver = { + .probe = imx_ahci_probe, + .remove = imx_ahci_remove, + .driver = { + .name = "ahci-imx", + .owner = THIS_MODULE, + .of_match_table = imx_ahci_of_match, + }, +}; +module_platform_driver(imx_ahci_driver); + +MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver"); +MODULE_AUTHOR("Richard Zhu "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("ahci:imx"); From 867974fc09f93bdd7f98d46ac3733934486bbf4a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 26 Jul 2013 08:57:56 -0400 Subject: [PATCH 7/7] ahci_imx: depend on CONFIG_MFD_SYSCON ahci_imx makes use of regmap but the dependency wasn't specified in Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but CONFIG_MFD_SYSCON is not. Add the Kconfig dependency. Signed-off-by: Tejun Heo Reported-by: Stephen Rothwell --- drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index a4af0a2a089c..4e737728aee2 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM config AHCI_IMX tristate "Freescale i.MX AHCI SATA support" - depends on SATA_AHCI_PLATFORM + depends on SATA_AHCI_PLATFORM && MFD_SYSCON help This option enables support for the Freescale i.MX SoC's onboard AHCI SATA.