regulator: pv88090: new regulator driver
This is the driver for the Powerventure PV88090 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>hifive-unleashed-5.1
James Ban
Mark Brown
parent
f307a7e9b7
commit
c90456e36d
|
|
@ -0,0 +1,65 @@
|
|||
* Powerventure Semiconductor PV88090 Voltage Regulator
|
||||
|
||||
Required properties:
|
||||
- compatible: "pvs,pv88090".
|
||||
- reg: I2C slave address, usually 0x48.
|
||||
- interrupts: the interrupt outputs of the controller
|
||||
- regulators: A node that houses a sub-node for each regulator within the
|
||||
device. Each sub-node is identified using the node's name, with valid
|
||||
values listed below. The content of each sub-node is defined by the
|
||||
standard binding for regulators; see regulator.txt.
|
||||
BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
|
||||
|
||||
Optional properties:
|
||||
- Any optional property defined in regulator.txt
|
||||
|
||||
Example
|
||||
|
||||
pmic: pv88090@48 {
|
||||
compatible = "pvs,pv88090";
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <24 24>;
|
||||
|
||||
regulators {
|
||||
BUCK1 {
|
||||
regulator-name = "buck1";
|
||||
regulator-min-microvolt = < 600000>;
|
||||
regulator-max-microvolt = <1393750>;
|
||||
regulator-min-microamp = < 220000>;
|
||||
regulator-max-microamp = <7040000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
BUCK2 {
|
||||
regulator-name = "buck2";
|
||||
regulator-min-microvolt = < 600000>;
|
||||
regulator-max-microvolt = <1393750>;
|
||||
regulator-min-microamp = <1496000>;
|
||||
regulator-max-microamp = <4189000>;
|
||||
};
|
||||
|
||||
BUCK3 {
|
||||
regulator-name = "buck3";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1393750>;
|
||||
regulator-min-microamp = <1496000>;
|
||||
regulator-max-microamp = <4189000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
LDO1 {
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <4350000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
LDO2 {
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = < 650000>;
|
||||
regulator-max-microvolt = <2225000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -512,6 +512,14 @@ config REGULATOR_PV88060
|
|||
Say y here to support the voltage regulators and convertors
|
||||
PV88060
|
||||
|
||||
config REGULATOR_PV88090
|
||||
tristate "Powerventure Semiconductor PV88090 regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
Say y here to support the voltage regulators and convertors
|
||||
on PV88090
|
||||
|
||||
config REGULATOR_PWM
|
||||
tristate "PWM voltage regulator"
|
||||
depends on PWM
|
||||
|
|
|
|||
|
|
@ -67,6 +67,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,458 @@
|
|||
/*
|
||||
* pv88090-regulator.c - Regulator device driver for PV88090
|
||||
* Copyright (C) 2015 Powerventure Semiconductor Ltd.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/proc_fs.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include "pv88090-regulator.h"
|
||||
|
||||
#define PV88090_MAX_REGULATORS 5
|
||||
|
||||
/* PV88090 REGULATOR IDs */
|
||||
enum {
|
||||
/* BUCKs */
|
||||
PV88090_ID_BUCK1,
|
||||
PV88090_ID_BUCK2,
|
||||
PV88090_ID_BUCK3,
|
||||
|
||||
/* LDOs */
|
||||
PV88090_ID_LDO1,
|
||||
PV88090_ID_LDO2,
|
||||
};
|
||||
|
||||
struct pv88090_regulator {
|
||||
struct regulator_desc desc;
|
||||
/* Current limiting */
|
||||
unsigned n_current_limits;
|
||||
const int *current_limits;
|
||||
unsigned int limit_mask;
|
||||
unsigned int conf;
|
||||
unsigned int conf2;
|
||||
};
|
||||
|
||||
struct pv88090 {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct regulator_dev *rdev[PV88090_MAX_REGULATORS];
|
||||
};
|
||||
|
||||
struct pv88090_buck_voltage {
|
||||
int min_uV;
|
||||
int max_uV;
|
||||
int uV_step;
|
||||
};
|
||||
|
||||
static const struct regmap_config pv88090_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
|
||||
* Entry indexes corresponds to register values.
|
||||
*/
|
||||
|
||||
static const int pv88090_buck1_limits[] = {
|
||||
220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000,
|
||||
1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000,
|
||||
3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000,
|
||||
5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000
|
||||
};
|
||||
|
||||
static const int pv88090_buck23_limits[] = {
|
||||
1496000, 2393000, 3291000, 4189000
|
||||
};
|
||||
|
||||
static const struct pv88090_buck_voltage pv88090_buck_vol[3] = {
|
||||
{
|
||||
.min_uV = 600000,
|
||||
.max_uV = 1393750,
|
||||
.uV_step = 6250,
|
||||
},
|
||||
|
||||
{
|
||||
.min_uV = 1400000,
|
||||
.max_uV = 2193750,
|
||||
.uV_step = 6250,
|
||||
},
|
||||
{
|
||||
.min_uV = 1250000,
|
||||
.max_uV = 2837500,
|
||||
.uV_step = 12500,
|
||||
},
|
||||
};
|
||||
|
||||
static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
||||
unsigned int data;
|
||||
int ret, mode = 0;
|
||||
|
||||
ret = regmap_read(rdev->regmap, info->conf, &data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
switch (data & PV88090_BUCK1_MODE_MASK) {
|
||||
case PV88090_BUCK_MODE_SYNC:
|
||||
mode = REGULATOR_MODE_FAST;
|
||||
break;
|
||||
case PV88090_BUCK_MODE_AUTO:
|
||||
mode = REGULATOR_MODE_NORMAL;
|
||||
break;
|
||||
case PV88090_BUCK_MODE_SLEEP:
|
||||
mode = REGULATOR_MODE_STANDBY;
|
||||
break;
|
||||
}
|
||||
|
||||
return mode;
|
||||
}
|
||||
|
||||
static int pv88090_buck_set_mode(struct regulator_dev *rdev,
|
||||
unsigned int mode)
|
||||
{
|
||||
struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
||||
int val = 0;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
val = PV88090_BUCK_MODE_SYNC;
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = PV88090_BUCK_MODE_AUTO;
|
||||
break;
|
||||
case REGULATOR_MODE_STANDBY:
|
||||
val = PV88090_BUCK_MODE_SLEEP;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return regmap_update_bits(rdev->regmap, info->conf,
|
||||
PV88090_BUCK1_MODE_MASK, val);
|
||||
}
|
||||
|
||||
static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
|
||||
int max)
|
||||
{
|
||||
struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
||||
int i;
|
||||
|
||||
/* search for closest to maximum */
|
||||
for (i = info->n_current_limits; i >= 0; i--) {
|
||||
if (min <= info->current_limits[i]
|
||||
&& max >= info->current_limits[i]) {
|
||||
return regmap_update_bits(rdev->regmap,
|
||||
info->conf,
|
||||
info->limit_mask,
|
||||
i << PV88090_BUCK1_ILIM_SHIFT);
|
||||
}
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int pv88090_get_current_limit(struct regulator_dev *rdev)
|
||||
{
|
||||
struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
||||
unsigned int data;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(rdev->regmap, info->conf, &data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT;
|
||||
return info->current_limits[data];
|
||||
}
|
||||
|
||||
static struct regulator_ops pv88090_buck_ops = {
|
||||
.get_mode = pv88090_buck_get_mode,
|
||||
.set_mode = pv88090_buck_set_mode,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_current_limit = pv88090_set_current_limit,
|
||||
.get_current_limit = pv88090_get_current_limit,
|
||||
};
|
||||
|
||||
static struct regulator_ops pv88090_ldo_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
};
|
||||
|
||||
#define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \
|
||||
{\
|
||||
.desc = {\
|
||||
.id = chip##_ID_##regl_name,\
|
||||
.name = __stringify(chip##_##regl_name),\
|
||||
.of_match = of_match_ptr(#regl_name),\
|
||||
.regulators_node = of_match_ptr("regulators"),\
|
||||
.type = REGULATOR_VOLTAGE,\
|
||||
.owner = THIS_MODULE,\
|
||||
.ops = &pv88090_buck_ops,\
|
||||
.min_uV = min, \
|
||||
.uV_step = step, \
|
||||
.n_voltages = ((max) - (min))/(step) + 1, \
|
||||
.enable_reg = PV88090_REG_##regl_name##_CONF0, \
|
||||
.enable_mask = PV88090_##regl_name##_EN, \
|
||||
.vsel_reg = PV88090_REG_##regl_name##_CONF0, \
|
||||
.vsel_mask = PV88090_V##regl_name##_MASK, \
|
||||
},\
|
||||
.current_limits = limits_array, \
|
||||
.n_current_limits = ARRAY_SIZE(limits_array), \
|
||||
.limit_mask = PV88090_##regl_name##_ILIM_MASK, \
|
||||
.conf = PV88090_REG_##regl_name##_CONF1, \
|
||||
.conf2 = PV88090_REG_##regl_name##_CONF2, \
|
||||
}
|
||||
|
||||
#define PV88090_LDO(chip, regl_name, min, step, max) \
|
||||
{\
|
||||
.desc = {\
|
||||
.id = chip##_ID_##regl_name,\
|
||||
.name = __stringify(chip##_##regl_name),\
|
||||
.of_match = of_match_ptr(#regl_name),\
|
||||
.regulators_node = of_match_ptr("regulators"),\
|
||||
.type = REGULATOR_VOLTAGE,\
|
||||
.owner = THIS_MODULE,\
|
||||
.ops = &pv88090_ldo_ops,\
|
||||
.min_uV = min, \
|
||||
.uV_step = step, \
|
||||
.n_voltages = ((max) - (min))/(step) + 1, \
|
||||
.enable_reg = PV88090_REG_##regl_name##_CONT, \
|
||||
.enable_mask = PV88090_##regl_name##_EN, \
|
||||
.vsel_reg = PV88090_REG_##regl_name##_CONT, \
|
||||
.vsel_mask = PV88090_V##regl_name##_MASK, \
|
||||
},\
|
||||
}
|
||||
|
||||
static struct pv88090_regulator pv88090_regulator_info[] = {
|
||||
PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750,
|
||||
pv88090_buck1_limits),
|
||||
PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750,
|
||||
pv88090_buck23_limits),
|
||||
PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750,
|
||||
pv88090_buck23_limits),
|
||||
PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000),
|
||||
PV88090_LDO(PV88090, LDO2, 650000, 25000, 2225000),
|
||||
};
|
||||
|
||||
static irqreturn_t pv88090_irq_handler(int irq, void *data)
|
||||
{
|
||||
struct pv88090 *chip = data;
|
||||
int i, reg_val, err, ret = IRQ_NONE;
|
||||
|
||||
err = regmap_read(chip->regmap, PV88090_REG_EVENT_A, ®_val);
|
||||
if (err < 0)
|
||||
goto error_i2c;
|
||||
|
||||
if (reg_val & PV88090_E_VDD_FLT) {
|
||||
for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
|
||||
if (chip->rdev[i] != NULL) {
|
||||
regulator_notifier_call_chain(chip->rdev[i],
|
||||
REGULATOR_EVENT_UNDER_VOLTAGE,
|
||||
NULL);
|
||||
}
|
||||
}
|
||||
|
||||
err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
|
||||
PV88090_E_VDD_FLT, PV88090_E_VDD_FLT);
|
||||
if (err < 0)
|
||||
goto error_i2c;
|
||||
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
if (reg_val & PV88090_E_OVER_TEMP) {
|
||||
for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
|
||||
if (chip->rdev[i] != NULL) {
|
||||
regulator_notifier_call_chain(chip->rdev[i],
|
||||
REGULATOR_EVENT_OVER_TEMP,
|
||||
NULL);
|
||||
}
|
||||
}
|
||||
|
||||
err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
|
||||
PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP);
|
||||
if (err < 0)
|
||||
goto error_i2c;
|
||||
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
return ret;
|
||||
|
||||
error_i2c:
|
||||
dev_err(chip->dev, "I2C error : %d\n", err);
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
/*
|
||||
* I2C driver interface functions
|
||||
*/
|
||||
static int pv88090_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
|
||||
struct pv88090 *chip;
|
||||
struct regulator_config config = { };
|
||||
int error, i, ret = 0;
|
||||
unsigned int conf2, range, index;
|
||||
|
||||
chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88090), GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
|
||||
chip->dev = &i2c->dev;
|
||||
chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config);
|
||||
if (IS_ERR(chip->regmap)) {
|
||||
error = PTR_ERR(chip->regmap);
|
||||
dev_err(chip->dev, "Failed to allocate register map: %d\n",
|
||||
error);
|
||||
return error;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(i2c, chip);
|
||||
|
||||
if (i2c->irq != 0) {
|
||||
ret = regmap_write(chip->regmap, PV88090_REG_MASK_A, 0xFF);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev,
|
||||
"Failed to mask A reg: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_write(chip->regmap, PV88090_REG_MASK_B, 0xFF);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev,
|
||||
"Failed to mask B reg: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = request_threaded_irq(i2c->irq, NULL,
|
||||
pv88090_irq_handler,
|
||||
IRQF_TRIGGER_LOW|IRQF_ONESHOT,
|
||||
"pv88090", chip);
|
||||
if (ret != 0) {
|
||||
dev_err(chip->dev, "Failed to request IRQ: %d\n",
|
||||
i2c->irq);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(chip->regmap, PV88090_REG_MASK_A,
|
||||
PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, 0);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev,
|
||||
"Failed to update mask reg: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
} else {
|
||||
dev_warn(chip->dev, "No IRQ configured\n");
|
||||
}
|
||||
|
||||
config.dev = chip->dev;
|
||||
config.regmap = chip->regmap;
|
||||
|
||||
for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
|
||||
if (init_data)
|
||||
config.init_data = &init_data[i];
|
||||
|
||||
if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) {
|
||||
ret = regmap_read(chip->regmap,
|
||||
pv88090_regulator_info[i].conf2, &conf2);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
conf2 = ((conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT)
|
||||
&& PV88090_BUCK_VDAC_RANGE_MASK);
|
||||
|
||||
ret = regmap_read(chip->regmap,
|
||||
PV88090_REG_BUCK_FOLD_RANGE, &range);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
range = ((range
|
||||
>> (PV88080_BUCK_VRANGE_GAIN_SHIFT + i - 1))
|
||||
&& PV88080_BUCK_VRANGE_GAIN_MASK);
|
||||
index = ((range << 1) | conf2);
|
||||
|
||||
pv88090_regulator_info[i].desc.min_uV
|
||||
= pv88090_buck_vol[index].min_uV;
|
||||
pv88090_regulator_info[i].desc.uV_step
|
||||
= pv88090_buck_vol[index].uV_step;
|
||||
pv88090_regulator_info[i].desc.n_voltages
|
||||
= ((pv88090_buck_vol[index].max_uV)
|
||||
- (pv88090_buck_vol[index].min_uV))
|
||||
/(pv88090_buck_vol[index].uV_step) + 1;
|
||||
}
|
||||
|
||||
config.driver_data = (void *)&pv88090_regulator_info[i];
|
||||
chip->rdev[i] = devm_regulator_register(chip->dev,
|
||||
&pv88090_regulator_info[i].desc, &config);
|
||||
if (IS_ERR(chip->rdev[i])) {
|
||||
dev_err(chip->dev,
|
||||
"Failed to register PV88090 regulator\n");
|
||||
return PTR_ERR(chip->rdev[i]);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id pv88090_i2c_id[] = {
|
||||
{"pv88090", 0},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id);
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id pv88090_dt_ids[] = {
|
||||
{ .compatible = "pvs,pv88090", .data = &pv88090_i2c_id[0] },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, pv88090_dt_ids);
|
||||
#endif
|
||||
|
||||
static struct i2c_driver pv88090_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "pv88090",
|
||||
.of_match_table = of_match_ptr(pv88090_dt_ids),
|
||||
},
|
||||
.probe = pv88090_i2c_probe,
|
||||
.id_table = pv88090_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(pv88090_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
|
||||
MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,98 @@
|
|||
/*
|
||||
* pv88090-regulator.h - Regulator definitions for PV88090
|
||||
* Copyright (C) 2015 Powerventure Semiconductor Ltd.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef __PV88090_REGISTERS_H__
|
||||
#define __PV88090_REGISTERS_H__
|
||||
|
||||
/* System Control and Event Registers */
|
||||
#define PV88090_REG_EVENT_A 0x03
|
||||
#define PV88090_REG_MASK_A 0x06
|
||||
#define PV88090_REG_MASK_B 0x07
|
||||
|
||||
/* Regulator Registers */
|
||||
#define PV88090_REG_BUCK1_CONF0 0x18
|
||||
#define PV88090_REG_BUCK1_CONF1 0x19
|
||||
#define PV88090_REG_BUCK1_CONF2 0x1a
|
||||
#define PV88090_REG_BUCK2_CONF0 0x1b
|
||||
#define PV88090_REG_BUCK2_CONF1 0x1c
|
||||
#define PV88090_REG_BUCK2_CONF2 0x58
|
||||
#define PV88090_REG_BUCK3_CONF0 0x1d
|
||||
#define PV88090_REG_BUCK3_CONF1 0x1e
|
||||
#define PV88090_REG_BUCK3_CONF2 0x5c
|
||||
|
||||
#define PV88090_REG_LDO1_CONT 0x1f
|
||||
#define PV88090_REG_LDO2_CONT 0x20
|
||||
#define PV88090_REG_LDO3_CONT 0x21
|
||||
#define PV88090_REG_BUCK_FOLD_RANGE 0x61
|
||||
|
||||
/* PV88090_REG_EVENT_A (addr=0x03) */
|
||||
#define PV88090_E_VDD_FLT 0x01
|
||||
#define PV88090_E_OVER_TEMP 0x02
|
||||
|
||||
/* PV88090_REG_MASK_A (addr=0x06) */
|
||||
#define PV88090_M_VDD_FLT 0x01
|
||||
#define PV88090_M_OVER_TEMP 0x02
|
||||
|
||||
/* PV88090_REG_BUCK1_CONF0 (addr=0x18) */
|
||||
#define PV88090_BUCK1_EN 0x80
|
||||
#define PV88090_VBUCK1_MASK 0x7F
|
||||
/* PV88090_REG_BUCK2_CONF0 (addr=0x1b) */
|
||||
#define PV88090_BUCK2_EN 0x80
|
||||
#define PV88090_VBUCK2_MASK 0x7F
|
||||
/* PV88090_REG_BUCK3_CONF0 (addr=0x1d) */
|
||||
#define PV88090_BUCK3_EN 0x80
|
||||
#define PV88090_VBUCK3_MASK 0x7F
|
||||
/* PV88090_REG_LDO1_CONT (addr=0x1f) */
|
||||
#define PV88090_LDO1_EN 0x40
|
||||
#define PV88090_VLDO1_MASK 0x3F
|
||||
/* PV88090_REG_LDO2_CONT (addr=0x20) */
|
||||
#define PV88090_LDO2_EN 0x40
|
||||
#define PV88090_VLDO2_MASK 0x3F
|
||||
|
||||
/* PV88090_REG_BUCK1_CONF1 (addr=0x19) */
|
||||
#define PV88090_BUCK1_ILIM_SHIFT 2
|
||||
#define PV88090_BUCK1_ILIM_MASK 0x7C
|
||||
#define PV88090_BUCK1_MODE_MASK 0x03
|
||||
|
||||
/* PV88090_REG_BUCK2_CONF1 (addr=0x1c) */
|
||||
#define PV88090_BUCK2_ILIM_SHIFT 2
|
||||
#define PV88090_BUCK2_ILIM_MASK 0x0C
|
||||
#define PV88090_BUCK2_MODE_MASK 0x03
|
||||
|
||||
/* PV88090_REG_BUCK3_CONF1 (addr=0x1e) */
|
||||
#define PV88090_BUCK3_ILIM_SHIFT 2
|
||||
#define PV88090_BUCK3_ILIM_MASK 0x0C
|
||||
#define PV88090_BUCK3_MODE_MASK 0x03
|
||||
|
||||
#define PV88090_BUCK_MODE_SLEEP 0x00
|
||||
#define PV88090_BUCK_MODE_AUTO 0x01
|
||||
#define PV88090_BUCK_MODE_SYNC 0x02
|
||||
|
||||
/* PV88090_REG_BUCK2_CONF2 (addr=0x58) */
|
||||
/* PV88090_REG_BUCK3_CONF2 (addr=0x5c) */
|
||||
#define PV88090_BUCK_VDAC_RANGE_SHIFT 7
|
||||
#define PV88090_BUCK_VDAC_RANGE_MASK 0x01
|
||||
|
||||
#define PV88090_BUCK_VDAC_RANGE_1 0x00
|
||||
#define PV88090_BUCK_VDAC_RANGE_2 0x01
|
||||
|
||||
/* PV88090_REG_BUCK_FOLD_RANGE (addr=0x61) */
|
||||
#define PV88080_BUCK_VRANGE_GAIN_SHIFT 3
|
||||
#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01
|
||||
|
||||
#define PV88080_BUCK_VRANGE_GAIN_1 0x00
|
||||
#define PV88080_BUCK_VRANGE_GAIN_2 0x01
|
||||
|
||||
#endif /* __PV88090_REGISTERS_H__ */
|
||||
Loading…
Reference in New Issue