phy: qcom-ufs: add support for 14nm phy
This change adds a support for a 14nm qcom-ufs phy that is required in platforms that use ufs-qcom controller. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>hifive-unleashed-5.1
Yaniv Gardi
Christoph Hellwig
parent
39e794bff7
commit
ca14ab55fb
|
|
@ -36,3 +36,4 @@ obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
|
|||
obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,201 @@
|
|||
/*
|
||||
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "phy-qcom-ufs-qmp-14nm.h"
|
||||
|
||||
#define UFS_PHY_NAME "ufs_phy_qmp_14nm"
|
||||
#define UFS_PHY_VDDA_PHY_UV (925000)
|
||||
|
||||
static
|
||||
int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
||||
bool is_rate_B)
|
||||
{
|
||||
int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
|
||||
int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
|
||||
int err;
|
||||
|
||||
err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A,
|
||||
tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B);
|
||||
|
||||
if (err)
|
||||
dev_err(ufs_qcom_phy->dev,
|
||||
"%s: ufs_qcom_phy_calibrate() failed %d\n",
|
||||
__func__, err);
|
||||
return err;
|
||||
}
|
||||
|
||||
static
|
||||
void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
|
||||
{
|
||||
phy_common->quirks =
|
||||
UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
|
||||
{
|
||||
struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy);
|
||||
struct ufs_qcom_phy *phy_common = &phy->common_cfg;
|
||||
int err;
|
||||
|
||||
err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
|
||||
phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
|
||||
|
||||
ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static
|
||||
void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
|
||||
{
|
||||
writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
||||
/*
|
||||
* Before any transactions involving PHY, ensure PHY knows
|
||||
* that it's analog rail is powered ON (or OFF).
|
||||
*/
|
||||
mb();
|
||||
}
|
||||
|
||||
static inline
|
||||
void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
|
||||
{
|
||||
/*
|
||||
* 14nm PHY does not have TX_LANE_ENABLE register.
|
||||
* Implement this function so as not to propagate error to caller.
|
||||
*/
|
||||
}
|
||||
|
||||
static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
|
||||
tmp &= ~MASK_SERDES_START;
|
||||
tmp |= (1 << OFFSET_SERDES_START);
|
||||
writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
|
||||
/* Ensure register value is committed */
|
||||
mb();
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
|
||||
{
|
||||
int err = 0;
|
||||
u32 val;
|
||||
|
||||
err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
|
||||
val, (val & MASK_PCS_READY), 10, 1000000);
|
||||
if (err)
|
||||
dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
|
||||
__func__, err);
|
||||
return err;
|
||||
}
|
||||
|
||||
static struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
|
||||
.init = ufs_qcom_phy_qmp_14nm_init,
|
||||
.exit = ufs_qcom_phy_exit,
|
||||
.power_on = ufs_qcom_phy_power_on,
|
||||
.power_off = ufs_qcom_phy_power_off,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
|
||||
.calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate,
|
||||
.start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
|
||||
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
|
||||
.set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
|
||||
.power_control = ufs_qcom_phy_qmp_14nm_power_control,
|
||||
};
|
||||
|
||||
static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct phy *generic_phy;
|
||||
struct ufs_qcom_phy_qmp_14nm *phy;
|
||||
int err = 0;
|
||||
|
||||
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||||
if (!phy) {
|
||||
dev_err(dev, "%s: failed to allocate phy\n", __func__);
|
||||
err = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
|
||||
generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
|
||||
&ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
|
||||
|
||||
if (!generic_phy) {
|
||||
dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
|
||||
__func__);
|
||||
err = -EIO;
|
||||
goto out;
|
||||
}
|
||||
|
||||
phy_set_drvdata(generic_phy, phy);
|
||||
|
||||
strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
|
||||
sizeof(phy->common_cfg.name));
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct phy *generic_phy = to_phy(dev);
|
||||
struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
|
||||
int err = 0;
|
||||
|
||||
err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
|
||||
if (err)
|
||||
dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
|
||||
__func__, err);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = {
|
||||
{.compatible = "qcom,ufs-phy-qmp-14nm"},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match);
|
||||
|
||||
static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = {
|
||||
.probe = ufs_qcom_phy_qmp_14nm_probe,
|
||||
.remove = ufs_qcom_phy_qmp_14nm_remove,
|
||||
.driver = {
|
||||
.of_match_table = ufs_qcom_phy_qmp_14nm_of_match,
|
||||
.name = "ufs_qcom_phy_qmp_14nm",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(ufs_qcom_phy_qmp_14nm_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,177 @@
|
|||
/*
|
||||
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef UFS_QCOM_PHY_QMP_14NM_H_
|
||||
#define UFS_QCOM_PHY_QMP_14NM_H_
|
||||
|
||||
#include "phy-qcom-ufs-i.h"
|
||||
|
||||
/* QCOM UFS PHY control registers */
|
||||
#define COM_OFF(x) (0x000 + x)
|
||||
#define PHY_OFF(x) (0xC00 + x)
|
||||
#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
|
||||
#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
|
||||
|
||||
/* UFS PHY QSERDES COM registers */
|
||||
#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
|
||||
#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
|
||||
#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
|
||||
#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
|
||||
#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
|
||||
#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
|
||||
#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
|
||||
#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
|
||||
#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
|
||||
#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
|
||||
#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
|
||||
#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
|
||||
#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
|
||||
#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
|
||||
#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
|
||||
#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
|
||||
#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
|
||||
#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
|
||||
#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
|
||||
#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
|
||||
#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
|
||||
#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
|
||||
#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
|
||||
#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
|
||||
#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
|
||||
#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
|
||||
#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
|
||||
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
|
||||
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
|
||||
#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
|
||||
#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
|
||||
#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
|
||||
#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
|
||||
#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
|
||||
#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
|
||||
#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
|
||||
#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
|
||||
#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
|
||||
#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
|
||||
#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
|
||||
#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
|
||||
#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
|
||||
#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
|
||||
#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
|
||||
#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
|
||||
#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
|
||||
|
||||
/* UFS PHY registers */
|
||||
#define UFS_PHY_PHY_START PHY_OFF(0x00)
|
||||
#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
|
||||
#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
|
||||
|
||||
/* UFS PHY TX registers */
|
||||
#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
|
||||
#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
|
||||
|
||||
/* UFS PHY RX registers */
|
||||
#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
|
||||
#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
|
||||
#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
|
||||
#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
|
||||
#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
|
||||
#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
|
||||
#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
|
||||
#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
|
||||
#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
|
||||
#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
|
||||
#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
|
||||
|
||||
/*
|
||||
* This structure represents the 14nm specific phy.
|
||||
* common_cfg MUST remain the first field in this structure
|
||||
* in case extra fields are added. This way, when calling
|
||||
* get_ufs_qcom_phy() of generic phy, we can extract the
|
||||
* common phy structure (struct ufs_qcom_phy) out of it
|
||||
* regardless of the relevant specific phy.
|
||||
*/
|
||||
struct ufs_qcom_phy_qmp_14nm {
|
||||
struct ufs_qcom_phy common_cfg;
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
|
||||
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
|
||||
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue