From ca5d1b3524b4d90a2e2f1f71583c1dca6b96fd92 Mon Sep 17 00:00:00 2001
From: Carlo Caione <carlo@caione.org>
Date: Wed, 5 Mar 2014 22:11:29 +0100
Subject: [PATCH] regulator: helpers: Modify helpers enabling multi-bit control

This patch extends the regulator helpers to account for device that use
multiple bits for control when using regmap enable/disable/bypass ops.

The actual regulator helpers wrongly assume that the regulator control
is always performed using single bits, using in the regulator_desc
struct only two parameters *_reg and *_mask defining register and mask
for control.

This patch extends this struct and introduces the helpers to take into
account devices where control is performed using multiple bits and
specific multi-bit values are used for enabling/disabling/bypassing the
regulator.

Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
---
 drivers/regulator/helpers.c      | 48 +++++++++++++++++++++-----------
 include/linux/regulator/driver.h |  8 ++++++
 2 files changed, 40 insertions(+), 16 deletions(-)

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index e221a271ba56..cbc39096c78d 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -37,10 +37,17 @@ int regulator_is_enabled_regmap(struct regulator_dev *rdev)
 	if (ret != 0)
 		return ret;
 
-	if (rdev->desc->enable_is_inverted)
-		return (val & rdev->desc->enable_mask) == 0;
-	else
-		return (val & rdev->desc->enable_mask) != 0;
+	val &= rdev->desc->enable_mask;
+
+	if (rdev->desc->enable_is_inverted) {
+		if (rdev->desc->enable_val)
+			return val != rdev->desc->enable_val;
+		return val == 0;
+	} else {
+		if (rdev->desc->enable_val)
+			return val == rdev->desc->enable_val;
+		return val != 0;
+	}
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
 
@@ -57,10 +64,13 @@ int regulator_enable_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 
-	if (rdev->desc->enable_is_inverted)
-		val = 0;
-	else
-		val = rdev->desc->enable_mask;
+	if (rdev->desc->enable_is_inverted) {
+		val = rdev->desc->disable_val;
+	} else {
+		val = rdev->desc->enable_val;
+		if (!val)
+			val = rdev->desc->enable_mask;
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val);
@@ -80,10 +90,13 @@ int regulator_disable_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 
-	if (rdev->desc->enable_is_inverted)
-		val = rdev->desc->enable_mask;
-	else
-		val = 0;
+	if (rdev->desc->enable_is_inverted) {
+		val = rdev->desc->enable_val;
+		if (!val)
+			val = rdev->desc->enable_mask;
+	} else {
+		val = rdev->desc->disable_val;
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val);
@@ -419,10 +432,13 @@ int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
 {
 	unsigned int val;
 
-	if (enable)
-		val = rdev->desc->bypass_mask;
-	else
-		val = 0;
+	if (enable) {
+		val = rdev->desc->bypass_val_on;
+		if (!val)
+			val = rdev->desc->bypass_mask;
+	} else {
+		val = rdev->desc->bypass_val_off;
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
 				  rdev->desc->bypass_mask, val);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 9370e65348a4..bbe03a1924c0 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -228,10 +228,14 @@ enum regulator_type {
  *                output when using regulator_set_voltage_sel_regmap
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
+ * @enable_val: Enabling value for control when using regmap enable/disable ops
+ * @disable_val: Disabling value for control when using regmap enable/disable ops
  * @enable_is_inverted: A flag to indicate set enable_mask bits to disable
  *                      when using regulator_enable_regmap and friends APIs.
  * @bypass_reg: Register for control when using regmap set_bypass
  * @bypass_mask: Mask for control when using regmap set_bypass
+ * @bypass_val_on: Enabling value for control when using regmap set_bypass
+ * @bypass_val_off: Disabling value for control when using regmap set_bypass
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  */
@@ -263,9 +267,13 @@ struct regulator_desc {
 	unsigned int apply_bit;
 	unsigned int enable_reg;
 	unsigned int enable_mask;
+	unsigned int enable_val;
+	unsigned int disable_val;
 	bool enable_is_inverted;
 	unsigned int bypass_reg;
 	unsigned int bypass_mask;
+	unsigned int bypass_val_on;
+	unsigned int bypass_val_off;
 
 	unsigned int enable_time;
 };