diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 9d2b673f90e3..b8125aa64ad8 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1169,8 +1169,8 @@ static int ep_enable(struct usb_ep *ep,
 
 	if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
 		cap |= QH_IOS;
-	if (hwep->num)
-		cap |= QH_ZLT;
+
+	cap |= QH_ZLT;
 	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
 	/*
 	 * For ISO-TX, we set mult at QH as the largest value, and use
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 21b99b4b4082..0e950ad8cb25 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -889,6 +889,25 @@ static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
 	if (!hub_is_superspeed(hub->hdev))
 		return -EINVAL;
 
+	ret = hub_port_status(hub, port1, &portstatus, &portchange);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
+	 * Controller [1022:7814] will have spurious result making the following
+	 * usb 3.0 device hotplugging route to the 2.0 root hub and recognized
+	 * as high-speed device if we set the usb 3.0 port link state to
+	 * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we
+	 * check the state here to avoid the bug.
+	 */
+	if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_RX_DETECT) {
+		dev_dbg(&hub->ports[port1 - 1]->dev,
+			 "Not disabling port; link state is RxDetect\n");
+		return ret;
+	}
+
 	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
 	if (ret)
 		return ret;