redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge commit 'v3.2-rc3' into stable/for-linus-3.3 

* commit 'v3.2-rc3': (412 commits)
  Linux 3.2-rc3
  virtio-pci: make reset operation safer
  virtio-mmio: Correct the name of the guest features selector
  virtio: add HAS_IOMEM dependency to MMIO platform bus driver
  eCryptfs: Extend array bounds for all filename chars
  eCryptfs: Flush file in vma close
  eCryptfs: Prevent file create race condition
  regulator: TPS65910: Fix VDD1/2 voltage selector count
  i2c: Make i2cdev_notifier_call static
  i2c: Delete ANY_I2C_BUS
  i2c: Fix device name for 10-bit slave address
  i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
  drm: integer overflow in drm_mode_dirtyfb_ioctl()
  Revert "of/irq: of_irq_find_parent: check for parent equal to child"
  drivers/gpu/vga/vgaarb.c: add missing kfree
  drm/radeon/kms/atom: unify i2c gpio table handling
  drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real
  ttm: Don't return the bo reserved on error path
  mount_subtree() pointless use-after-free
  iio: fix a leak due to improper use of anon_inode_getfd()
  ...
hifive-unleashed-5.1
Konrad Rzeszutek Wilk 2011-12-20 17:01:18 -05:00
parent b79d2ff98c caca6a03d3
commit cb85f123cd
451 changed files with 3853 additions and 3325 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
Documentation/ABI/testing/sysfs-block
View File

@ -206,16 +206,3 @@ Description:
when a discarded area is read the discard_zeroes_data
parameter will be set to one. Otherwise it will be 0 and
the result of reading a discarded area is undefined.
What: /sys/block/<disk>/alias
Date: Aug 2011
Contact: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Description:
A raw device name of a disk does not always point a same disk
each boot-up time. Therefore, users have to use persistent
device names, which udev creates when the kernel finds a disk,
instead of raw device name. However, kernel doesn't show those
persistent names on its messages (e.g. dmesg).
This file can store an alias of the disk and it would be
appeared in kernel messages if it is set. A disk can have an
alias which length is up to 255bytes. Users can use alphabets,
numbers, "-" and "_" in alias name. This file is writeonce.

7
Documentation/DocBook/uio-howto.tmpl
View File

@ -520,6 +520,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
</para>
<itemizedlist>
<listitem><para>
<varname>const char *name</varname>: Optional. Set this to help identify
the memory region, it will show up in the corresponding sysfs node.
</para></listitem>
<listitem><para>
<varname>int memtype</varname>: Required if the mapping is used. Set this to
<varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
@ -553,7 +558,7 @@ instead to remember such an address.
</itemizedlist>
<para>
Please do not touch the <varname>kobj</varname> element of
Please do not touch the <varname>map</varname> element of
<varname>struct uio_mem</varname>! It is used by the UIO framework
to set up sysfs files for this mapping. Simply leave it alone.
</para>

14
Documentation/blockdev/cciss.txt
View File

@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
"SCSI support" in your kernel configuration to be able to use SCSI
tape drives with your Smart Array 5xxx controller.
Additionally, note that the driver will not engage the SCSI core at init
time. The driver must be directed to dynamically engage the SCSI core via
the /proc filesystem entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is because at driver init time,
the SCSI core may not yet be initialized (because the driver is a block
driver) and attempting to register it with the SCSI core in such a case
would cause a hang. This is best done via an initialization script
(typically in /etc/init.d, but could vary depending on distribution).
Additionally, note that the driver will engage the SCSI core at init
time if any tape drives or medium changers are detected. The driver may
also be directed to dynamically engage the SCSI core via the /proc filesystem
entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is best done via a script.
For example:
for x in /proc/driver/cciss/cciss[0-9]*

36
Documentation/i2c/ten-bit-addresses
View File

@ -1,22 +1,24 @@
The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them). You
select a 10 bit address by adding an extra byte after the address
byte:
S Addr7 Rd/Wr ....
becomes
S 11110 Addr10 Rd/Wr
S is the start bit, Rd/Wr the read/write bit, and if you count the number
of bits, you will see the there are 8 after the S bit for 7 bit addresses,
and 16 after the S bit for 10 bit addresses.
address 0x10 (though a single device could respond to both of them).
WARNING! The current 10 bit address support is EXPERIMENTAL. There are
several places in the code that will cause SEVERE PROBLEMS with 10 bit
addresses, even though there is some basic handling and hooks. Also,
almost no supported adapter handles the 10 bit addresses correctly.
I2C messages to and from 10-bit address devices have a different format.
See the I2C specification for the details.
As soon as a real 10 bit address device is spotted 'in the wild', we
can and will add proper support. Right now, 10 bit address devices
are defined by the I2C protocol, but we have never seen a single device
which supports them.
The current 10 bit address support is minimal. It should work, however
you can expect some problems along the way:
* Not all bus drivers support 10-bit addresses. Some don't because the
hardware doesn't support them (SMBus doesn't require 10-bit address
support for example), some don't because nobody bothered adding the
code (or it's there but not working properly.) Software implementation
(i2c-algo-bit) is known to work.
* Some optional features do not support 10-bit addresses. This is the
case of automatic detection and instantiation of devices by their,
drivers, for example.
* Many user-space packages (for example i2c-tools) lack support for
10-bit addresses.
Note that 10-bit address devices are still pretty rare, so the limitations
listed above could stay for a long time, maybe even forever if nobody
needs them to be fixed.

2
Documentation/networking/ip-sysctl.txt
View File

@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN
default FALSE
min_pmtu - INTEGER
default 562 - minimum discovered Path MTU
default 552 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase

14
Documentation/serial/serial-rs485.txt
View File

@ -97,15 +97,23 @@
struct serial_rs485 rs485conf;
/* Set RS485 mode: */
/* Enable RS485 mode: */
rs485conf.flags |= SER_RS485_ENABLED;
/* Set logical level for RTS pin equal to 1 when sending: */
rs485conf.flags |= SER_RS485_RTS_ON_SEND;
/* or, set logical level for RTS pin equal to 0 when sending: */
rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
/* Set logical level for RTS pin equal to 1 after sending: */
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
/* or, set logical level for RTS pin equal to 0 after sending: */
rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
/* Set rts delay before send, if needed: */
rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
rs485conf.delay_rts_before_send = ...;
/* Set rts delay after send, if needed: */
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
rs485conf.delay_rts_after_send = ...;
/* Set this flag if you want to receive data even whilst sending data */

8
Documentation/sound/alsa/HD-Audio.txt
View File

@ -579,7 +579,7 @@ Development Tree
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
The master branch or for-next branches can be used as the main
development branches in general while the HD-audio specific patches
@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make
install(-modules). See INSTALL in the package. The snapshot tarballs
are found at:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
Sending a Bug Report
@ -696,7 +696,7 @@ via hda-verb won't change the mixer value.
The hda-verb program is found in the ftp directory:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
- ftp://ftp.suse.com/pub/people/tiwai/misc/
Also a git repository is available:
@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc.
The package is found in:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
- ftp://ftp.suse.com/pub/people/tiwai/misc/
A git repository is available:

26
MAINTAINERS
View File

@ -1789,6 +1789,14 @@ F: include/net/cfg80211.h
F: net/wireless/*
X: net/wireless/wext*
CHAR and MISC DRIVERS
M: Arnd Bergmann <arnd@arndb.de>
M: Greg Kroah-Hartman <greg@kroah.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
S: Maintained
F: drivers/char/*
F: drivers/misc/*
CHECKPATCH
M: Andy Whitcroft <apw@canonical.com>
S: Supported
@ -1927,9 +1935,11 @@ S: Maintained
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
M: Paul Menage <paul@paulmenage.org>
M: Tejun Heo <tj@kernel.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
L: cgroups@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
S: Maintained
F: include/linux/cgroup*
F: kernel/cgroup*
@ -2584,7 +2594,7 @@ S: Maintained
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -3718,7 +3728,7 @@ F: fs/jbd2/
F: include/linux/jbd2.h
JSM Neo PCI based serial card
M: Breno Leitao <leitao@linux.vnet.ibm.com>
M: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/jsm/
@ -4304,6 +4314,7 @@ MEMORY RESOURCE CONTROLLER
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
@ -4337,7 +4348,7 @@ MIPS
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/linux.git
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
@ -4470,7 +4481,7 @@ S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
@ -5985,7 +5996,7 @@ S: Maintained
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
@ -7433,7 +7444,8 @@ F: drivers/xen/*swiotlb*
XFS FILESYSTEM
P: Silicon Graphics Inc
M: Alex Elder <aelder@sgi.com>
M: Ben Myers <bpm@sgi.com>
M: Alex Elder <elder@kernel.org>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

2
arch/arm/boot/Makefile
View File

@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
clean-files := *.dtb
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \

2
arch/arm/include/asm/hardware/cache-l2x0.h
View File

@ -20,6 +20,8 @@
#ifndef __ASM_ARM_HARDWARE_L2X0_H
#define __ASM_ARM_HARDWARE_L2X0_H
#include <linux/errno.h>
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100

1
arch/arm/include/asm/mach/arch.h
View File

@ -13,6 +13,7 @@
struct tag;
struct meminfo;
struct sys_timer;
struct pt_regs;
struct machine_desc {
unsigned int nr; /* architecture number */

2
arch/arm/include/asm/unistd.h
View File

@ -402,6 +402,8 @@
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/*
* The following SWIs are ARM private.

2
arch/arm/kernel/calls.S
View File

@ -385,6 +385,8 @@
CALL(sys_syncfs)
CALL(sys_sendmmsg)
/* 375 */ CALL(sys_setns)
CALL(sys_process_vm_readv)
CALL(sys_process_vm_writev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

2
arch/arm/kernel/head.S
View File

@ -360,7 +360,7 @@ __secondary_data:
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A

35
arch/arm/kernel/machine_kexec.c
View File

@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
int machine_kexec_prepare(struct kimage *image)
{
unsigned long page_list;
void *reboot_code_buffer;
page_list = image->head & PAGE_MASK;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
return 0;
}
@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
void machine_kexec(struct kimage *image)
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
page_list = image->head & PAGE_MASK;
/* we need both effective and real address here */
reboot_code_buffer_phys =
page_to_pfn(image->control_code_page) << PAGE_SHIFT;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)

6
arch/arm/kernel/setup.c
View File

@ -461,8 +461,10 @@ static void __init setup_processor(void)
cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
list->arch_name, ENDIANNESS);
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;

2
arch/arm/mach-bcmring/core.c
View File

@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
*/
bcmring_clocksource_init();
sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {

1
arch/arm/mach-bcmring/dma.c
View File

@ -36,6 +36,7 @@
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

33
arch/arm/mach-shmobile/pm-sh7372.c
View File

@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/bitrev.h>
#include <linux/console.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
@ -106,9 +107,8 @@ static int pd_power_down(struct generic_pm_domain *genpd)
return 0;
}
static int pd_power_up(struct generic_pm_domain *genpd)
static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
{
struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
unsigned int retry_count;
int ret = 0;
@ -123,13 +123,13 @@ static int pd_power_up(struct generic_pm_domain *genpd)
for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
if (!(__raw_readl(SWUCR) & mask))
goto out;
break;
if (retry_count > PSTR_RETRIES)
udelay(PSTR_DELAY_US);
else
cpu_relax();
}
if (__raw_readl(SWUCR) & mask)
if (!retry_count)
ret = -EIO;
if (!sh7372_pd->no_debug)
@ -137,12 +137,17 @@ static int pd_power_up(struct generic_pm_domain *genpd)
mask, __raw_readl(PSTR));
out:
if (ret == 0 && sh7372_pd->resume)
if (ret == 0 && sh7372_pd->resume && do_resume)
sh7372_pd->resume();
return ret;
}
static int pd_power_up(struct generic_pm_domain *genpd)
{
return __pd_power_up(to_sh7372_pd(genpd), true);
}
static void sh7372_a4r_suspend(void)
{
sh7372_intcs_suspend();
@ -174,7 +179,7 @@ void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
genpd->active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
genpd->power_on(&sh7372_pd->genpd);
__pd_power_up(sh7372_pd, false);
}
void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
@ -227,11 +232,23 @@ struct sh7372_pm_domain sh7372_a3sp = {
.no_debug = true,
};
static void sh7372_a3sp_init(void)
{
/* serial consoles make use of SCIF hardware located in A3SP,
* keep such power domain on if "no_console_suspend" is set.
*/
sh7372_a3sp.stay_on = !console_suspend_enabled;
}
struct sh7372_pm_domain sh7372_a3sg = {
.bit_shift = 13,
};
#endif /* CONFIG_PM */
#else /* !CONFIG_PM */
static inline void sh7372_a3sp_init(void) {}
#endif /* !CONFIG_PM */
#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
static int sh7372_do_idle_core_standby(unsigned long unused)
@ -465,6 +482,8 @@ void __init sh7372_pm_init(void)
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
sh7372_a3sp_init();
sh7372_suspend_init();
sh7372_cpuidle_init();
}

4
arch/arm/mach-w90x900/dev.c
View File

@ -422,7 +422,7 @@ struct platform_device nuc900_device_kpi = {
/* LCD controller*/
static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
static struct nuc900fb_display nuc900_lcd_info[] = {
/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
[0] = {
.type = LCM_DCCS_VA_SRC_RGB565,
@ -445,7 +445,7 @@ static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
},
};
static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
static struct nuc900fb_mach_info nuc900_fb_info = {
#if defined(CONFIG_GPM1040A0_320X240)
.displays = &nuc900_lcd_info[0],
#else

3
arch/arm/mach-w90x900/include/mach/mfp.h
View File

@ -19,6 +19,7 @@
extern void mfp_set_groupf(struct device *dev);
extern void mfp_set_groupc(struct device *dev);
extern void mfp_set_groupi(struct device *dev);
extern void mfp_set_groupg(struct device *dev);
extern void mfp_set_groupg(struct device *dev, const char *subname);
extern void mfp_set_groupd(struct device *dev, const char *subname);
#endif /* __ASM_ARCH_MFP_H */

2
arch/arm/mach-w90x900/include/mach/nuc900_spi.h
View File

@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_SPI_H
#define __ASM_ARCH_SPI_H
extern void mfp_set_groupg(struct device *dev);
extern void mfp_set_groupg(struct device *dev, const char *subname);
struct nuc900_spi_info {
unsigned int num_cs;

48
arch/arm/mach-w90x900/mfp.c
View File

@ -26,10 +26,8 @@
#define REG_MFSEL (W90X900_VA_GCR + 0xC)
#define GPSELF (0x01 << 1)
#define GPSELC (0x03 << 2)
#define ENKPI (0x02 << 2)
#define ENNAND (0x01 << 2)
#define GPSELD (0x0f << 4)
#define GPSELEI0 (0x01 << 26)
#define GPSELEI1 (0x01 << 27)
@ -37,11 +35,16 @@
#define GPIOG0TO1 (0x03 << 14)
#define GPIOG2TO3 (0x03 << 16)
#define GPIOG22TO23 (0x03 << 22)
#define GPIOG18TO20 (0x07 << 18)
#define ENSPI (0x0a << 14)
#define ENI2C0 (0x01 << 14)
#define ENI2C1 (0x01 << 16)
#define ENAC97 (0x02 << 22)
#define ENSD1 (0x02 << 18)
#define ENSD0 (0x0a << 4)
#define ENKPI (0x02 << 2)
#define ENNAND (0x01 << 2)
static DEFINE_MUTEX(mfp_mutex);
@ -127,16 +130,19 @@ void mfp_set_groupi(struct device *dev)
}
EXPORT_SYMBOL(mfp_set_groupi);
void mfp_set_groupg(struct device *dev)
void mfp_set_groupg(struct device *dev, const char *subname)
{
unsigned long mfpen;
const char *dev_id;
BUG_ON(!dev);
BUG_ON((!dev) && (!subname));
mutex_lock(&mfp_mutex);
dev_id = dev_name(dev);
if (subname != NULL)
dev_id = subname;
else
dev_id = dev_name(dev);
mfpen = __raw_readl(REG_MFSEL);
@ -152,6 +158,9 @@ void mfp_set_groupg(struct device *dev)
} else if (strcmp(dev_id, "nuc900-audio") == 0) {
mfpen &= ~(GPIOG22TO23);
mfpen |= ENAC97;/*enable AC97*/
} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
mfpen &= ~(GPIOG18TO20);
mfpen |= (ENSD1 | 0x01);/*enable sd1*/
} else {
mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
}
@ -162,3 +171,30 @@ void mfp_set_groupg(struct device *dev)
}
EXPORT_SYMBOL(mfp_set_groupg);
void mfp_set_groupd(struct device *dev, const char *subname)
{
unsigned long mfpen;
const char *dev_id;
BUG_ON((!dev) && (!subname));
mutex_lock(&mfp_mutex);
if (subname != NULL)
dev_id = subname;
else
dev_id = dev_name(dev);
mfpen = __raw_readl(REG_MFSEL);
if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
mfpen &= ~GPSELD;/*enable sd0*/
mfpen |= ENSD0;
} else
mfpen &= (~GPSELD);
__raw_writel(mfpen, REG_MFSEL);
mutex_unlock(&mfp_mutex);
}
EXPORT_SYMBOL(mfp_set_groupd);

2
arch/cris/arch-v10/drivers/Kconfig
View File

@ -3,7 +3,7 @@ if ETRAX_ARCH_V10
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
select NET_ETHERNET
select ETHERNET
select NET_CORE
select MII
help

2
arch/cris/arch-v32/drivers/Kconfig
View File

@ -3,7 +3,7 @@ if ETRAX_ARCH_V32
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V32
select NET_ETHERNET
select ETHERNET
select NET_CORE
select MII
help

22
arch/microblaze/include/asm/namei.h
View File

@ -1,22 +0,0 @@
/*
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_MICROBLAZE_NAMEI_H
#define _ASM_MICROBLAZE_NAMEI_H
#ifdef __KERNEL__
/* This dummy routine maybe changed to something useful
* for /usr/gnemul/ emulation stuff.
* Look at asm-sparc/namei.h for details.
*/
#define __emul_prefix() NULL
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_NAMEI_H */

9
arch/mips/cavium-octeon/flash_setup.c
View File

@ -17,8 +17,6 @@
static struct map_info flash_map;
static struct mtd_info *mymtd;
static int nr_parts;
static struct mtd_partition *parts;
static const char *part_probe_types[] = {
"cmdlinepart",
#ifdef CONFIG_MTD_REDBOOT_PARTS
@ -61,11 +59,8 @@ static int __init flash_init(void)
mymtd = do_map_probe("cfi_probe", &flash_map);
if (mymtd) {
mymtd->owner = THIS_MODULE;
nr_parts = parse_mtd_partitions(mymtd,
part_probe_types,
&parts, 0);
mtd_device_register(mymtd, parts, nr_parts);
mtd_device_parse_register(mymtd, part_probe_types,
0, NULL, 0);
} else {
pr_err("Failed to register MTD device for flash\n");
}

5
arch/mips/cavium-octeon/smp.c
View File

@ -207,8 +207,9 @@ void octeon_prepare_cpus(unsigned int max_cpus)
* the other bits alone.
*/
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
"SMP-IPI", mailbox_interrupt)) {
if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
}

2
arch/mips/emma/common/prom.c
View File

@ -50,7 +50,7 @@ void __init prom_init(void)
/* arg[0] is "g", the rest is boot parameters */
for (i = 1; i < argc; i++) {
if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);

18
arch/mips/include/asm/mach-bcm47xx/gpio.h
View File

@ -36,6 +36,8 @@ static inline int gpio_get_value(unsigned gpio)
return -EINVAL;
}
#define gpio_get_value_cansleep gpio_get_value
static inline void gpio_set_value(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
@ -54,6 +56,19 @@ static inline void gpio_set_value(unsigned gpio, int value)
}
}
#define gpio_set_value_cansleep gpio_set_value
static inline int gpio_cansleep(unsigned gpio)
{
return 0;
}
static inline int gpio_is_valid(unsigned gpio)
{
return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
}
static inline int gpio_direction_input(unsigned gpio)
{
switch (bcm47xx_bus_type) {
@ -137,7 +152,4 @@ static inline int gpio_polarity(unsigned gpio, int value)
}
/* cansleep wrappers */
#include <asm-generic/gpio.h>
#endif /* __BCM47XX_GPIO_H */

18
arch/mips/include/asm/unistd.h
View File

@ -365,16 +365,18 @@
#define __NR_syncfs (__NR_Linux + 342)
#define __NR_sendmmsg (__NR_Linux + 343)
#define __NR_setns (__NR_Linux + 344)
#define __NR_process_vm_readv (__NR_Linux + 345)
#define __NR_process_vm_writev (__NR_Linux + 346)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 344
#define __NR_Linux_syscalls 346
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 344
#define __NR_O32_Linux_syscalls 346
#if _MIPS_SIM == _MIPS_SIM_ABI64
@ -686,16 +688,18 @@
#define __NR_syncfs (__NR_Linux + 301)
#define __NR_sendmmsg (__NR_Linux + 302)
#define __NR_setns (__NR_Linux + 303)
#define __NR_process_vm_readv (__NR_Linux + 304)
#define __NR_process_vm_writev (__NR_Linux + 305)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 303
#define __NR_Linux_syscalls 305
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 303
#define __NR_64_Linux_syscalls 305
#if _MIPS_SIM == _MIPS_SIM_NABI32
@ -1012,16 +1016,18 @@
#define __NR_syncfs (__NR_Linux + 306)
#define __NR_sendmmsg (__NR_Linux + 307)
#define __NR_setns (__NR_Linux + 308)
#define __NR_process_vm_readv (__NR_Linux + 309)
#define __NR_process_vm_writev (__NR_Linux + 310)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 308
#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 308
#define __NR_N32_Linux_syscalls 310
#ifdef __KERNEL__

38
arch/mips/kernel/cevt-r4k.c
View File

@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
/*
* Compare interrupt can be routed and latched outside the core,
* so a single execution hazard barrier may not be enough to give
* it time to clear as seen in the Cause register. 4 time the
* pipeline depth seems reasonably conservative, and empirically
* works better in configurations with high CPU/bus clock ratios.
* so wait up to worst case number of cycle counter ticks for timer interrupt
* changes to propagate to the cause register.
*/
#define compare_change_hazard() \
do { \
irq_disable_hazard(); \
irq_disable_hazard(); \
irq_disable_hazard(); \
irq_disable_hazard(); \
} while (0)
#define COMPARE_INT_SEEN_TICKS 50
int c0_compare_int_usable(void)
{
@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
* IP7 already pending? Try to clear it by acking the timer.
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
compare_change_hazard();
cnt = read_c0_count();
write_c0_compare(cnt);
back_to_back_c0_hazard();
while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
if (!c0_compare_int_pending())
break;
if (c0_compare_int_pending())
return 0;
}
@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
compare_change_hazard();
back_to_back_c0_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
compare_change_hazard();
while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
if (c0_compare_int_pending())
break;
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_count());
compare_change_hazard();
cnt = read_c0_count();
write_c0_compare(cnt);
back_to_back_c0_hazard();
while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
if (!c0_compare_int_pending())
break;
if (c0_compare_int_pending())
return 0;

1
arch/mips/kernel/cpufreq/loongson2_clock.c
View File

@ -7,6 +7,7 @@
* for more details.
*/
#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>

2
arch/mips/kernel/scall32-o32.S
View File

@ -591,6 +591,8 @@ einval: li v0, -ENOSYS
sys sys_syncfs 1
sys sys_sendmmsg 4
sys sys_setns 2
sys sys_process_vm_readv 6 /* 4345 */
sys sys_process_vm_writev 6
.endm
/* We pre-compute the number of _instruction_ bytes needed to

2
arch/mips/kernel/scall64-64.S
View File

@ -430,4 +430,6 @@ sys_call_table:
PTR sys_syncfs
PTR sys_sendmmsg
PTR sys_setns
PTR sys_process_vm_readv
PTR sys_process_vm_writev /* 5305 */
.size sys_call_table,.-sys_call_table

2
arch/mips/kernel/scall64-n32.S
View File

@ -430,4 +430,6 @@ EXPORT(sysn32_call_table)
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
PTR compat_sys_process_vm_readv
PTR compat_sys_process_vm_writev /* 6310 */
.size sysn32_call_table,.-sysn32_call_table

2
arch/mips/kernel/scall64-o32.S
View File

@ -548,4 +548,6 @@ sys_call_table:
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
PTR compat_sys_process_vm_readv /* 4345 */
PTR compat_sys_process_vm_writev
.size sys_call_table,.-sys_call_table

3
arch/mips/kernel/traps.c
View File

@ -1596,7 +1596,8 @@ void __cpuinit per_cpu_trap_init(void)
}
#endif /* CONFIG_MIPS_MT_SMTC */
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
if (!cpu_data[cpu].asid_cache)
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;

2
arch/mips/lantiq/clk.c
View File

@ -7,7 +7,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>

2
arch/mips/lantiq/devices.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>

2
arch/mips/lantiq/prom.c
View File

@ -6,7 +6,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>

2
arch/mips/lantiq/setup.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>

2
arch/mips/lantiq/xway/clk-ase.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>

2
arch/mips/lantiq/xway/clk-xway.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>

2
arch/mips/lantiq/xway/devices.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mtd/physmap.h>

1
arch/mips/lantiq/xway/dma.c
View File

@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/export.h>
#include <lantiq_soc.h>
#include <xway_dma.h>

2
arch/mips/lantiq/xway/gpio.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/ioport.h>

2
arch/mips/lantiq/xway/gpio_ebu.c
View File

@ -7,7 +7,7 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>

2
arch/mips/lantiq/xway/gpio_stp.c
View File

@ -9,7 +9,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>

2
arch/mips/lantiq/xway/prom-ase.c
View File

@ -6,7 +6,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>

2
arch/mips/lantiq/xway/prom-xway.c
View File

@ -6,7 +6,7 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>

2
arch/mips/lantiq/xway/reset.c
View File

@ -10,7 +10,7 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/module.h>
#include <linux/export.h>
#include <asm/reboot.h>
#include <lantiq_soc.h>

134
arch/mips/nxp/pnx8550/common/pci.c
View File

@ -1,134 +0,0 @@
/*
*
* BRIEF MODULE DESCRIPTION
*
* Author: source@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <pci.h>
#include <glb.h>
#include <nand.h>
static struct resource pci_io_resource = {
.start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
.end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
.name = "pci IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
.start = PNX8550_PCIMEM,
.end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
.name = "pci memory space",
.flags = IORESOURCE_MEM
};
extern struct pci_ops pnx8550_pci_ops;
static struct pci_controller pnx8550_controller = {
.pci_ops = &pnx8550_pci_ops,
.io_map_base = PNX8550_PORT_BASE,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
static inline unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
static int __init pnx8550_pci_setup(void)
{
int pci_mem_code;
int mem_size = get_system_mem_size() >> 20;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* Calc the PCI mem size code */
if (mem_size >= 128)
pci_mem_code = SIZE_128M;
else if (mem_size >= 64)
pci_mem_code = SIZE_64M;
else if (mem_size >= 32)
pci_mem_code = SIZE_32M;
else
pci_mem_code = SIZE_16M;
/* Set PCI_XIO registers */
outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
/* Send memory transaction via PCI_BASE2 */
outl(0x00000001, PCI_BASE | PCI_IO);
/* Unlock the setup register */
outl(0xca, PCI_BASE | PCI_UNLOCKREG);
/*
* BAR0 of PNX8550 (pci base 10) must be zero in order for ide
* to work, and in order for bus_to_baddr to work without any
* hacks.
*/
outl(0x00000000, PCI_BASE | PCI_BASE10);
/*
*These two bars are set by default or the boot code.
* However, it's safer to set them here so we're not boot
* code dependent.
*/
outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
outl(PCI_EN_TA |
PCI_EN_PCI2MMI |
PCI_EN_XIO |
PCI_SETUP_BASE18_SIZE(SIZE_32M) |
PCI_SETUP_BASE18_EN |
PCI_SETUP_BASE14_EN |
PCI_SETUP_BASE10_PREF |
PCI_SETUP_BASE10_SIZE(pci_mem_code) |
PCI_SETUP_CFGMANAGE_EN |
PCI_SETUP_PCIARB_EN,
PCI_BASE |
PCI_SETUP); /* PCI_SETUP */
outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
register_pci_controller(&pnx8550_controller);
return 0;
}
arch_initcall(pnx8550_pci_setup);

143
arch/mips/nxp/pnx8550/common/setup.c
View File

@ -1,143 +0,0 @@
/*
*
* 2.6 port, Embedded Alley Solutions, Inc
*
* Based on Per Hallsmark, per.hallsmark@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/serial_pnx8xxx.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/time.h>
#include <glb.h>
#include <int.h>
#include <pci.h>
#include <uart.h>
#include <nand.h>
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
{
.start = 0x00,
.end = 0x1f,
.name = "dma1",
.flags = IORESOURCE_BUSY
}, {
.start = 0x40,
.end = 0x5f,
.name = "timer",
.flags = IORESOURCE_BUSY
}, {
.start = 0x80,
.end = 0x8f,
.name = "dma page reg",
.flags = IORESOURCE_BUSY
}, {
.start = 0xc0,
.end = 0xdf,
.name = "dma2",
.flags = IORESOURCE_BUSY
},
};
#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
extern struct resource pci_io_resource;
extern struct resource pci_mem_resource;
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
int pnx8550_console_port = -1;
void __init plat_mem_setup(void)
{
int i;
char* argptr;
board_setup(); /* board specific setup */
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
pm_power_off = pnx8550_machine_power_off;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* IO/MEM resources. */
set_io_port_base(PNX8550_PORT_BASE);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
iomem_resource.end = ~0;
/* Request I/O space for devices on this board */
for (i = 0; i < STANDARD_IO_RESOURCES; i++)
request_resource(&ioport_resource, standard_io_resources + i);
/* Place the Mode Control bit for GPIO pin 16 in primary function */
/* Pin 16 is used by UART1, UA1_TX */
outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
PNX8550_GPIO_MC1);
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
argptr += strlen("console=ttyS");
pnx8550_console_port = *argptr == '0' ? 0 : 1;
/* We must initialize the UART (console) before early printk */
/* Set LCR to 8-bit and BAUD to 38400 (no 5) */
ip3106_lcr(UART_BASE, pnx8550_console_port) =
PNX8XXX_UART_LCR_8BIT;
ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
}
}

1
arch/mips/pci/pci-alchemy.c
View File

@ -7,6 +7,7 @@
* Support for all devices (greater than 16) added by David Gathright.
*/
#include <linux/export.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/platform_device.h>

1
arch/mips/pci/pci-lantiq.c
View File

@ -13,6 +13,7 @@
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <asm/pci.h>

2
arch/mips/pmc-sierra/yosemite/prom.c
View File

@ -102,7 +102,7 @@ void __init prom_init(void)
/* Get the boot parameters */
for (i = 1; i < argc; i++) {
if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
sizeof(arcs_cmdline))
break;

2
arch/powerpc/Kconfig
View File

@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot

6
arch/powerpc/Makefile
View File

@ -255,12 +255,6 @@ checkbin:
echo 'disable kernel modules' ; \
false ; \
fi
@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
echo 'correctly with old versions of binutils.' ; \
echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
false ; \
fi
CLEAN_FILES += $(TOUT)

48
arch/powerpc/include/asm/atomic.h
View File

@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v)
int t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_add_return\n\
add %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v)
int t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_sub_return\n\
subf %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v)
int t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_inc_return\n\
addic %0,%0,1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1 \n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v)
int t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_return\n\
addic %0,%0,-1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
@ -194,7 +194,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
int t;
__asm__ __volatile__ (
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # __atomic_add_unless\n\
cmpw 0,%0,%3 \n\
beq- 2f \n\
@ -202,7 +202,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
PPC405_ERR77(0,%2)
" stwcx. %0,0,%1 \n\
bne- 1b \n"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
@ -226,7 +226,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
int t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\
cmpwi %0,1\n\
addi %0,%0,-1\n\
@ -234,7 +234,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&b" (t)
: "r" (&v->counter)
@ -285,12 +285,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v)
long t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_add_return\n\
add %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
@ -319,12 +319,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
long t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_sub_return\n\
subf %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
@ -351,12 +351,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v)
long t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_inc_return\n\
addic %0,%0,1\n\
stdcx. %0,0,%1 \n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
@ -393,12 +393,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v)
long t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_return\n\
addic %0,%0,-1\n\
stdcx. %0,0,%1\n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
@ -418,13 +418,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
long t;
__asm__ __volatile__(
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\
addic. %0,%0,-1\n\
blt- 2f\n\
stdcx. %0,0,%1\n\
bne- 1b"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&r" (t)
: "r" (&v->counter)
@ -450,14 +450,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
long t;
__asm__ __volatile__ (
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # __atomic_add_unless\n\
cmpd 0,%0,%3 \n\
beq- 2f \n\
add %0,%2,%0 \n"
" stdcx. %0,0,%1 \n\
bne- 1b \n"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)

12
arch/powerpc/include/asm/bitops.h
View File

@ -124,14 +124,14 @@ static __inline__ unsigned long fn( \
return (old & mask); \
}
DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
PPC_ACQUIRE_BARRIER, 0)
DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
PPC_ATOMIC_EXIT_BARRIER, 0)
DEFINE_TESTOP(test_and_set_bits_lock, or, "",
PPC_ACQUIRE_BARRIER, 1)
DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
PPC_ACQUIRE_BARRIER, 0)
DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
PPC_ACQUIRE_BARRIER, 0)
DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
PPC_ATOMIC_EXIT_BARRIER, 0)
DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
PPC_ATOMIC_EXIT_BARRIER, 0)
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)

7
arch/powerpc/include/asm/futex.h
View File

@ -11,12 +11,13 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile ( \
PPC_RELEASE_BARRIER \
PPC_ATOMIC_ENTRY_BARRIER \
"1: lwarx %0,0,%2\n" \
insn \
PPC405_ERR77(0, %2) \
"2: stwcx. %1,0,%2\n" \
"bne- 1b\n" \
PPC_ATOMIC_EXIT_BARRIER \
"li %1,0\n" \
"3: .section .fixup,\"ax\"\n" \
"4: li %1,%3\n" \
@ -92,14 +93,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
return -EFAULT;
__asm__ __volatile__ (
PPC_RELEASE_BARRIER
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
cmpw 0,%1,%4\n\
bne- 3f\n"
PPC405_ERR77(0,%3)
"2: stwcx. %5,0,%3\n\
bne- 1b\n"
PPC_ACQUIRE_BARRIER
PPC_ATOMIC_EXIT_BARRIER
"3: .section .fixup,\"ax\"\n\
4: li %0,%6\n\
b 3b\n\

8
arch/powerpc/include/asm/kvm.h
View File

@ -148,12 +148,6 @@ struct kvm_regs {
#define KVM_SREGS_E_UPDATE_DEC (1 << 2)
#define KVM_SREGS_E_UPDATE_DBSR (1 << 3)
/*
* Book3S special bits to indicate contents in the struct by maintaining
* backwards compatibility with older structs. If adding a new field,
* please make sure to add a flag for that new field */
#define KVM_SREGS_S_HIOR (1 << 0)
/*
* In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
* previous KVM_GET_REGS.
@ -179,8 +173,6 @@ struct kvm_sregs {
__u64 ibat[8];
__u64 dbat[8];
} ppc32;
__u64 flags; /* KVM_SREGS_S_ */
__u64 hior;
} s;
struct {
union {

2
arch/powerpc/include/asm/kvm_book3s.h
View File

@ -90,8 +90,6 @@ struct kvmppc_vcpu_book3s {
#endif
int context_id[SID_CONTEXTS];
bool hior_sregs; /* HIOR is set by SREGS, not PVR */
struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];

2
arch/powerpc/include/asm/reg_booke.h
View File

@ -31,7 +31,7 @@
#define MSR_ MSR_ME | MSR_CE
#define MSR_KERNEL MSR_ | MSR_64BIT
#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE
#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
#define MSR_USER64 MSR_USER32 | MSR_64BIT
#elif defined (CONFIG_40x)
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)

2
arch/powerpc/include/asm/sections.h
View File

@ -8,7 +8,7 @@
#ifdef __powerpc64__
extern char _end[];
extern char __end_interrupts[];
static inline int in_kernel_text(unsigned long addr)
{

9
arch/powerpc/include/asm/synch.h
View File

@ -13,6 +13,7 @@
extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
void *fixup_end);
extern void do_final_fixups(void);
static inline void eieio(void)
{
@ -41,11 +42,15 @@ static inline void isync(void)
START_LWSYNC_SECTION(97); \
isync; \
MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n"
#else
#define PPC_ACQUIRE_BARRIER
#define PPC_RELEASE_BARRIER
#define PPC_ATOMIC_ENTRY_BARRIER
#define PPC_ATOMIC_EXIT_BARRIER
#endif
#endif /* __KERNEL__ */

15
arch/powerpc/kernel/entry_32.S
View File

@ -215,7 +215,22 @@ reenable_mmu: /* re-enable mmu so we can */
stw r9,8(r1)
stw r11,12(r1)
stw r3,ORIG_GPR3(r1)
/*
* The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
* If from user mode there is only one stack frame on the stack, and
* accessing CALLER_ADDR1 will cause oops. So we need create a dummy
* stack frame to make trace_hardirqs_off happy.
*/
andi. r12,r12,MSR_PR
beq 11f
stwu r1,-16(r1)
bl trace_hardirqs_off
addi r1,r1,16
b 12f
11:
bl trace_hardirqs_off
12:
lwz r0,GPR0(r1)
lwz r3,ORIG_GPR3(r1)
lwz r4,GPR4(r1)

2
arch/powerpc/kernel/jump_label.c
View File

@ -11,6 +11,7 @@
#include <linux/jump_label.h>
#include <asm/code-patching.h>
#ifdef HAVE_JUMP_LABEL
void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type)
{
@ -21,3 +22,4 @@ void arch_jump_label_transform(struct jump_entry *entry,
else
patch_instruction(addr, PPC_INST_NOP);
}
#endif

1
arch/powerpc/kernel/kvm.c
View File

@ -132,7 +132,6 @@ static void kvm_patch_ins_b(u32 *inst, int addr)
/* On relocatable kernels interrupts handlers and our code
can be in different regions, so we don't patch them */
extern u32 __end_interrupts;
if ((ulong)inst < (ulong)&__end_interrupts)
return;
#endif

2
arch/powerpc/kernel/misc_32.S
View File

@ -738,7 +738,7 @@ relocate_new_kernel:
mr r5, r31
li r0, 0
#elif defined(CONFIG_44x) && !defined(CONFIG_47x)
#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x)
/*
* Code for setting up 1:1 mapping for PPC440x for KEXEC

24
arch/powerpc/kernel/process.c
View File

@ -486,28 +486,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
new_thread = &new->thread;
old_thread = &current->thread;
#if defined(CONFIG_PPC_BOOK3E_64)
/* XXX Current Book3E code doesn't deal with kernel side DBCR0,
* we always hold the user values, so we set it now.
*
* However, we ensure the kernel MSR:DE is appropriately cleared too
* to avoid spurrious single step exceptions in the kernel.
*
* This will have to change to merge with the ppc32 code at some point,
* but I don't like much what ppc32 is doing today so there's some
* thinking needed there
*/
if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
u32 dbcr0;
mtmsr(mfmsr() & ~MSR_DE);
isync();
dbcr0 = mfspr(SPRN_DBCR0);
dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
mtspr(SPRN_DBCR0, dbcr0);
}
#endif /* CONFIG_PPC64_BOOK3E */
#ifdef CONFIG_PPC64
/*
* Collect processor utilization data per process
@ -657,7 +635,7 @@ void show_regs(struct pt_regs * regs)
if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
printk("CFAR: "REG"\n", regs->orig_gpr3);
if (trap == 0x300 || trap == 0x600)
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
#else
printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);

6
arch/powerpc/kernel/prom_init.c
View File

@ -1579,10 +1579,8 @@ static void __init prom_instantiate_rtas(void)
return;
base = alloc_down(size, PAGE_SIZE, 0);
if (base == 0) {
prom_printf("RTAS allocation failed !\n");
return;
}
if (base == 0)
prom_panic("Could not allocate memory for RTAS\n");
rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
if (!IHANDLE_VALID(rtas_inst)) {

2
arch/powerpc/kernel/setup_32.c
View File

@ -107,6 +107,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
PTRRELOC(&__start___lwsync_fixup),
PTRRELOC(&__stop___lwsync_fixup));
do_final_fixups();
return KERNELBASE + offset;
}

1
arch/powerpc/kernel/setup_64.c
View File

@ -359,6 +359,7 @@ void __init setup_system(void)
&__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
do_lwsync_fixups(cur_cpu_spec->cpu_features,
&__start___lwsync_fixup, &__stop___lwsync_fixup);
do_final_fixups();
/*
* Unflatten the device-tree passed by prom_init or kexec

2
arch/powerpc/kernel/signal_32.c
View File

@ -97,7 +97,7 @@ static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
compat_sigset_t cset;
switch (_NSIG_WORDS) {
case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
cset.sig[7] = set->sig[3] >> 32;
case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
cset.sig[5] = set->sig[2] >> 32;

2
arch/powerpc/kernel/traps.c
View File

@ -1298,14 +1298,12 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
if (user_mode(regs)) {
current->thread.dbcr0 &= ~DBCR0_IC;
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
current->thread.dbcr1))
regs->msr |= MSR_DE;
else
/* Make sure the IDM bit is off */
current->thread.dbcr0 &= ~DBCR0_IDM;
#endif
}
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);

1
arch/powerpc/kvm/book3s_hv.c
View File

@ -44,6 +44,7 @@
#include <asm/processor.h>
#include <asm/cputhreads.h>
#include <asm/page.h>
#include <asm/hvcall.h>
#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>

14
arch/powerpc/kvm/book3s_pr.c
View File

@ -151,16 +151,14 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
#ifdef CONFIG_PPC_BOOK3S_64
if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
kvmppc_mmu_book3s_64_init(vcpu);
if (!to_book3s(vcpu)->hior_sregs)
to_book3s(vcpu)->hior = 0xfff00000;
to_book3s(vcpu)->hior = 0xfff00000;
to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
vcpu->arch.cpu_type = KVM_CPU_3S_64;
} else
#endif
{
kvmppc_mmu_book3s_32_init(vcpu);
if (!to_book3s(vcpu)->hior_sregs)
to_book3s(vcpu)->hior = 0;
to_book3s(vcpu)->hior = 0;
to_book3s(vcpu)->msr_mask = 0xffffffffULL;
vcpu->arch.cpu_type = KVM_CPU_3S_32;
}
@ -797,9 +795,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
}
}
if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
sregs->u.s.hior = to_book3s(vcpu)->hior;
return 0;
}
@ -836,11 +831,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
/* Flush the MMU after messing with the segments */
kvmppc_mmu_pte_flush(vcpu, 0, 0);
if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
to_book3s(vcpu)->hior_sregs = true;
to_book3s(vcpu)->hior = sregs->u.s.hior;
}
return 0;
}

1
arch/powerpc/kvm/powerpc.c
View File

@ -208,7 +208,6 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_PPC_BOOKE_SREGS:
#else
case KVM_CAP_PPC_SEGSTATE:
case KVM_CAP_PPC_HIOR:
case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:

23
arch/powerpc/lib/feature-fixups.c
View File

@ -18,6 +18,8 @@
#include <linux/init.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
#include <asm/page.h>
#include <asm/sections.h>
struct fixup_entry {
@ -128,6 +130,27 @@ void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
}
}
void do_final_fixups(void)
{
#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
int *src, *dest;
unsigned long length;
if (PHYSICAL_START == 0)
return;
src = (int *)(KERNELBASE + PHYSICAL_START);
dest = (int *)KERNELBASE;
length = (__end_interrupts - _stext) / sizeof(int);
while (length--) {
patch_instruction(dest, *src);
src++;
dest++;
}
#endif
}
#ifdef CONFIG_FTR_FIXUP_SELFTEST
#define check(x) \

2
arch/powerpc/platforms/Kconfig
View File

@ -347,7 +347,7 @@ config SIMPLE_GPIO
config MCU_MPC8349EMITX
bool "MPC8349E-mITX MCU driver"
depends on I2C && PPC_83xx
depends on I2C=y && PPC_83xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help

23
arch/powerpc/platforms/ps3/interrupt.c
View File

@ -88,6 +88,7 @@ struct ps3_private {
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
u64 ppe_id;
u64 thread_id;
unsigned long ipi_mask;
};
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
@ -144,7 +145,11 @@ static void ps3_chip_unmask(struct irq_data *d)
static void ps3_chip_eoi(struct irq_data *d)
{
const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
/* non-IPIs are EOIed here. */
if (!test_bit(63 - d->irq, &pd->ipi_mask))
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
}
/**
@ -691,6 +696,16 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
set_bit(63 - virq, &pd->ipi_mask);
DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
cpu, virq, pd->ipi_mask);
}
static unsigned int ps3_get_irq(void)
{
struct ps3_private *pd = &__get_cpu_var(ps3_private);
@ -720,6 +735,12 @@ static unsigned int ps3_get_irq(void)
BUG();
}
#endif
/* IPIs are EOIed here. */
if (test_bit(63 - plug, &pd->ipi_mask))
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
return plug;
}

1
arch/powerpc/platforms/ps3/platform.h
View File

@ -43,6 +43,7 @@ void ps3_mm_shutdown(void);
void ps3_init_IRQ(void);
void ps3_shutdown_IRQ(int cpu);
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
/* smp */

62
arch/powerpc/platforms/ps3/smp.c
View File

@ -59,46 +59,49 @@ static void ps3_smp_message_pass(int cpu, int msg)
static int ps3_smp_probe(void)
{
return 2;
}
int cpu;
static void __init ps3_smp_setup_cpu(int cpu)
{
int result;
unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
int i;
for (cpu = 0; cpu < 2; cpu++) {
int result;
unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
int i;
DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
/*
* Check assumptions on ps3_ipi_virqs[] indexing. If this
* check fails, then a different mapping of PPC_MSG_
* to index needs to be setup.
*/
/*
* Check assumptions on ps3_ipi_virqs[] indexing. If this
* check fails, then a different mapping of PPC_MSG_
* to index needs to be setup.
*/
BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
for (i = 0; i < MSG_COUNT; i++) {
result = ps3_event_receive_port_setup(cpu, &virqs[i]);
for (i = 0; i < MSG_COUNT; i++) {
result = ps3_event_receive_port_setup(cpu, &virqs[i]);
if (result)
continue;
if (result)
continue;
DBG("%s:%d: (%d, %d) => virq %u\n",
__func__, __LINE__, cpu, i, virqs[i]);
DBG("%s:%d: (%d, %d) => virq %u\n",
__func__, __LINE__, cpu, i, virqs[i]);
result = smp_request_message_ipi(virqs[i], i);
result = smp_request_message_ipi(virqs[i], i);
if (result)
virqs[i] = NO_IRQ;
if (result)
virqs[i] = NO_IRQ;
else
ps3_register_ipi_irq(cpu, virqs[i]);
}
ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
}
ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
return 2;
}
void ps3_smp_cleanup_cpu(int cpu)
@ -121,7 +124,6 @@ static struct smp_ops_t ps3_smp_ops = {
.probe = ps3_smp_probe,
.message_pass = ps3_smp_message_pass,
.kick_cpu = smp_generic_kick_cpu,
.setup_cpu = ps3_smp_setup_cpu,
};
void smp_init_ps3(void)

1
arch/s390/Kconfig
View File

@ -572,6 +572,7 @@ config KEXEC
config CRASH_DUMP
bool "kernel crash dumps"
depends on 64BIT
select KEXEC
help
Generate crash dump after being started by kexec.
Crash dump kernels are loaded in the main kernel with kexec-tools

7
arch/s390/crypto/crypt_s390.h
View File

@ -368,9 +368,12 @@ static inline int crypt_s390_func_available(int func,
if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
return 0;
if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
if (facility_mask & CRYPT_S390_MSA3 &&
(!test_facility(2) || !test_facility(76)))
return 0;
if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
if (facility_mask & CRYPT_S390_MSA4 &&
(!test_facility(2) || !test_facility(77)))
return 0;
switch (func & CRYPT_S390_OP_MASK) {

3
arch/s390/include/asm/kvm_host.h
View File

@ -47,7 +47,7 @@ struct sca_block {
#define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1))
#define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE)
#define CPUSTAT_HOST 0x80000000
#define CPUSTAT_STOPPED 0x80000000
#define CPUSTAT_WAIT 0x10000000
#define CPUSTAT_ECALL_PEND 0x08000000
#define CPUSTAT_STOP_INT 0x04000000
@ -139,6 +139,7 @@ struct kvm_vcpu_stat {
u32 instruction_stfl;
u32 instruction_tprot;
u32 instruction_sigp_sense;
u32 instruction_sigp_sense_running;
u32 instruction_sigp_external_call;
u32 instruction_sigp_emergency;
u32 instruction_sigp_stop;

12
arch/s390/include/asm/pgtable.h
View File

@ -593,6 +593,8 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste)
unsigned long address, bits;
unsigned char skey;
if (!pte_present(*ptep))
return pgste;
address = pte_val(*ptep) & PAGE_MASK;
skey = page_get_storage_key(address);
bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
@ -625,6 +627,8 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste)
#ifdef CONFIG_PGSTE
int young;
if (!pte_present(*ptep))
return pgste;
young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
/* Transfer page referenced bit to pte software bit (host view) */
if (young || (pgste_val(pgste) & RCP_HR_BIT))
@ -638,13 +642,15 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste)
}
static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
{
#ifdef CONFIG_PGSTE
unsigned long address;
unsigned long okey, nkey;
address = pte_val(*ptep) & PAGE_MASK;
if (!pte_present(entry))
return;
address = pte_val(entry) & PAGE_MASK;
okey = nkey = page_get_storage_key(address);
nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT);
/* Set page access key and fetch protection bit from pgste */
@ -712,7 +718,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
if (mm_has_pgste(mm)) {
pgste = pgste_get_lock(ptep);
pgste_set_pte(ptep, pgste);
pgste_set_pte(ptep, pgste, entry);
*ptep = entry;
pgste_set_unlock(ptep, pgste);
} else

3
arch/s390/include/asm/setup.h
View File

@ -82,6 +82,7 @@ extern unsigned int user_mode;
#define MACHINE_FLAG_LPAR (1UL << 12)
#define MACHINE_FLAG_SPP (1UL << 13)
#define MACHINE_FLAG_TOPOLOGY (1UL << 14)
#define MACHINE_FLAG_STCKF (1UL << 15)
#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
@ -100,6 +101,7 @@ extern unsigned int user_mode;
#define MACHINE_HAS_PFMF (0)
#define MACHINE_HAS_SPP (0)
#define MACHINE_HAS_TOPOLOGY (0)
#define MACHINE_HAS_STCKF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
@ -111,6 +113,7 @@ extern unsigned int user_mode;
#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#define MACHINE_HAS_SPP (S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
#define MACHINE_HAS_TOPOLOGY (S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
#define MACHINE_HAS_STCKF (S390_lowcore.machine_flags & MACHINE_FLAG_STCKF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)

2
arch/s390/include/asm/timex.h
View File

@ -90,7 +90,7 @@ static inline unsigned long long get_clock_fast(void)
{
unsigned long long clk;
if (test_facility(25))
if (MACHINE_HAS_STCKF)
asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
else
clk = get_clock();

4
arch/s390/include/asm/unistd.h
View File

@ -277,7 +277,9 @@
#define __NR_clock_adjtime 337
#define __NR_syncfs 338
#define __NR_setns 339
#define NR_syscalls 340
#define __NR_process_vm_readv 340
#define __NR_process_vm_writev 341
#define NR_syscalls 342
/*
* There are some system calls that are not present on 64 bit, some

20
arch/s390/kernel/compat_wrapper.S
View File

@ -1627,3 +1627,23 @@ ENTRY(sys_setns_wrapper)
lgfr %r2,%r2 # int
lgfr %r3,%r3 # int
jg sys_setns
ENTRY(compat_sys_process_vm_readv_wrapper)
lgfr %r2,%r2 # compat_pid_t
llgtr %r3,%r3 # struct compat_iovec __user *
llgfr %r4,%r4 # unsigned long
llgtr %r5,%r5 # struct compat_iovec __user *
llgfr %r6,%r6 # unsigned long
llgf %r0,164(%r15) # unsigned long
stg %r0,160(%r15)
jg sys_process_vm_readv
ENTRY(compat_sys_process_vm_writev_wrapper)
lgfr %r2,%r2 # compat_pid_t
llgtr %r3,%r3 # struct compat_iovec __user *
llgfr %r4,%r4 # unsigned long
llgtr %r5,%r5 # struct compat_iovec __user *
llgfr %r6,%r6 # unsigned long
llgf %r0,164(%r15) # unsigned long
stg %r0,160(%r15)
jg sys_process_vm_writev

2
arch/s390/kernel/early.c
View File

@ -390,6 +390,8 @@ static __init void detect_machine_facilities(void)
S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
if (test_facility(40))
S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
if (test_facility(25))
S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF;
#endif
}

4
arch/s390/kernel/setup.c
View File

@ -211,6 +211,8 @@ static void __init setup_zfcpdump(unsigned int console_devno)
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return;
if (OLDMEM_BASE)
return;
if (console_devno != -1)
sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
ipl_info.data.fcp.dev_id.devno, console_devno);
@ -482,7 +484,7 @@ static void __init setup_memory_end(void)
#ifdef CONFIG_ZFCPDUMP
if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) {
memory_end = ZFCPDUMP_HSA_SIZE;
memory_end_set = 1;
}

2
arch/s390/kernel/syscalls.S
View File

@ -348,3 +348,5 @@ SYSCALL(sys_open_by_handle_at,sys_open_by_handle_at,compat_sys_open_by_handle_at
SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper)
SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)

45
arch/s390/kernel/topology.c
View File

@ -68,8 +68,10 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu)
return mask;
}
static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
struct mask_info *book, struct mask_info *core)
static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
struct mask_info *book,
struct mask_info *core,
int z10)
{
unsigned int cpu;
@ -88,10 +90,16 @@ static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
cpu_book_id[lcpu] = book->id;
#endif
cpumask_set_cpu(lcpu, &core->mask);
cpu_core_id[lcpu] = core->id;
if (z10) {
cpu_core_id[lcpu] = rcpu;
core = core->next;
} else {
cpu_core_id[lcpu] = core->id;
}
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
}
return core;
}
static void clear_masks(void)
@ -123,18 +131,41 @@ static void tl_to_cores(struct sysinfo_15_1_x *info)
{
#ifdef CONFIG_SCHED_BOOK
struct mask_info *book = &book_info;
struct cpuid cpu_id;
#else
struct mask_info *book = NULL;
#endif
struct mask_info *core = &core_info;
union topology_entry *tle, *end;
int z10 = 0;
#ifdef CONFIG_SCHED_BOOK
get_cpu_id(&cpu_id);
z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098;
#endif
spin_lock_irq(&topology_lock);
clear_masks();
tle = info->tle;
end = (union topology_entry *)((unsigned long)info + info->length);
while (tle < end) {
#ifdef CONFIG_SCHED_BOOK
if (z10) {
switch (tle->nl) {
case 1:
book = book->next;
book->id = tle->container.id;
break;
case 0:
core = add_cpus_to_mask(&tle->cpu, book, core, z10);
break;
default:
clear_masks();
goto out;
}
tle = next_tle(tle);
continue;
}
#endif
switch (tle->nl) {
#ifdef CONFIG_SCHED_BOOK
case 2:
@ -147,7 +178,7 @@ static void tl_to_cores(struct sysinfo_15_1_x *info)
core->id = tle->container.id;
break;
case 0:
add_cpus_to_mask(&tle->cpu, book, core);
add_cpus_to_mask(&tle->cpu, book, core, z10);
break;
default:
clear_masks();
@ -328,8 +359,8 @@ void __init s390_init_cpu_topology(void)
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
printk(" %d", info->mag[i]);
printk(" / %d\n", info->mnest);
alloc_masks(info, &core_info, 2);
alloc_masks(info, &core_info, 1);
#ifdef CONFIG_SCHED_BOOK
alloc_masks(info, &book_info, 3);
alloc_masks(info, &book_info, 2);
#endif
}

2
arch/s390/kernel/vmlinux.lds.S
View File

@ -43,6 +43,8 @@ SECTIONS
NOTES :text :note
.dummy : { *(.dummy) } :data
RODATA
#ifdef CONFIG_SHARED_KERNEL

2
arch/s390/kvm/diag.c
View File

@ -70,7 +70,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu)
return -EOPNOTSUPP;
}
atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;

Some files were not shown because too many files have changed in this diff Show More