From 6f00294fc0f6de93470822066471712160f088be Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 25 Jun 2012 03:41:27 -0700 Subject: [PATCH 1/2] ARM: shmobile: use common extra gpio functions on g4evm This patch switch over to use common extra gpio method, and reduced a waste of code on SH-ARM. But these functions should be replaced by correct gpio function in the future. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/board-g4evm.c | 38 ++++++++-------------------- 1 file changed, 10 insertions(+), 28 deletions(-) diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index f1257321999a..af9c3e2d3b83 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -271,24 +271,6 @@ static struct platform_device *g4evm_devices[] __initdata = { #define GPIO_SDHID1_D3 0xe6052106 #define GPIO_SDHICMD1 0xe6052107 -/* - * FIXME !! - * - * gpio_pull_up is quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_pull_up(u32 addr) -{ - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xC0; - __raw_writeb(data, addr); -} - static void __init g4evm_init(void) { sh7377_pinmux_init(); @@ -351,11 +333,11 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_SDHID0_3, NULL); gpio_request(GPIO_FN_SDHICMD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_pull_up(GPIO_SDHID0_D0); - gpio_pull_up(GPIO_SDHID0_D1); - gpio_pull_up(GPIO_SDHID0_D2); - gpio_pull_up(GPIO_SDHID0_D3); - gpio_pull_up(GPIO_SDHICMD0); + gpio_request_pullup(GPIO_SDHID0_D0); + gpio_request_pullup(GPIO_SDHID0_D1); + gpio_request_pullup(GPIO_SDHID0_D2); + gpio_request_pullup(GPIO_SDHID0_D3); + gpio_request_pullup(GPIO_SDHICMD0); /* SDHI1 */ gpio_request(GPIO_FN_SDHICLK1, NULL); @@ -364,11 +346,11 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_SDHID1_2, NULL); gpio_request(GPIO_FN_SDHID1_3, NULL); gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_pull_up(GPIO_SDHID1_D0); - gpio_pull_up(GPIO_SDHID1_D1); - gpio_pull_up(GPIO_SDHID1_D2); - gpio_pull_up(GPIO_SDHID1_D3); - gpio_pull_up(GPIO_SDHICMD1); + gpio_request_pullup(GPIO_SDHID1_D0); + gpio_request_pullup(GPIO_SDHID1_D1); + gpio_request_pullup(GPIO_SDHID1_D2); + gpio_request_pullup(GPIO_SDHID1_D3); + gpio_request_pullup(GPIO_SDHICMD1); sh7377_add_standard_devices(); From 85f77ecf1685ca1f1ba15198b66d410c3d041465 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 27 Jun 2012 00:32:28 +0200 Subject: [PATCH 2/2] ARM: mach-shmobile: add fixed voltage regulators to g4evm On g4evm provide a 3.3V supply for its SD/MMC-card interfaces. Signed-off-by: Guennadi Liakhovetski Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/board-g4evm.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index af9c3e2d3b83..fa5dfc5c8ed6 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include #include #include @@ -196,6 +198,15 @@ static struct platform_device keysc_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_caps = MMC_CAP_SDIO_IRQ, @@ -273,6 +284,9 @@ static struct platform_device *g4evm_devices[] __initdata = { static void __init g4evm_init(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + sh7377_pinmux_init(); /* Lit DS14 LED */