From d1fb10609ae189c1294c793f833a5c6b1bc71001 Mon Sep 17 00:00:00 2001 From: Jerry Huang Date: Wed, 14 Mar 2012 17:08:27 +0800 Subject: [PATCH] powerpc/85xx: add P1020MBG-PC platform support The p1020mbg-pc has the similar feature as the p1020rdb. Therefore, p1020mbg-pc use the same platform file as the p1/p2 rdb board. Overview of P1020MBG-PC platform: - DDR3 2GB - NOR flash 64MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 2 USB ports - 4 TDM ports - PCIe (Lane1 to dual SATA controller) Signed-off-by: Jerry Huang Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 4976f4e101a2..2c2a272e79fa 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -89,6 +89,7 @@ static void __init mpc85xx_rdb_setup_arch(void) machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices); machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices); +machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices); machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices); machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices); machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices); @@ -139,6 +140,13 @@ static int __init p1025_rdb_probe(void) return of_flat_dt_is_compatible(root, "fsl,P1025RDB"); } +static int __init p1020_mbg_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC"); +} + define_machine(p2020_rdb) { .name = "P2020 RDB", .probe = p2020_rdb_probe, @@ -208,3 +216,17 @@ define_machine(p1025_rdb) { .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; + +define_machine(p1020_mbg_pc) { + .name = "P1020 MBG-PC", + .probe = p1020_mbg_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +};