redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Thermal: imx: add clk disable/enable for suspend/resume 

Thermal sensor's clk is from pll3_usb_otg, per hardware
design requirement, need to make sure pll3_usb_otg is disabled
before STOP mode is entered, otherwise, all PFDs under it may
enter incorrect state, this patch disables pll3_usb_otg before
suspend and enables it after resume.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
hifive-unleashed-5.1
Anson Huang 2015-01-06 18:50:22 +08:00 committed by Eduardo Valentin
parent 5a723e8192
commit d26eef8b72
1 changed files with 2 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/thermal/imx_thermal.c
View File

@ -608,6 +608,7 @@ static int imx_thermal_suspend(struct device *dev)
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
data->mode = THERMAL_DEVICE_DISABLED;
clk_disable_unprepare(data->thermal_clk);
return 0;
}
@ -617,6 +618,7 @@ static int imx_thermal_resume(struct device *dev)
struct imx_thermal_data *data = dev_get_drvdata(dev);
struct regmap *map = data->tempmon;
clk_prepare_enable(data->thermal_clk);
/* Enabled thermal sensor after resume */
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);