diff --git a/drivers/media/usb/stk1160/stk1160-reg.h b/drivers/media/usb/stk1160/stk1160-reg.h index 3e49da6e7edd..81ff3a15d96e 100644 --- a/drivers/media/usb/stk1160/stk1160-reg.h +++ b/drivers/media/usb/stk1160/stk1160-reg.h @@ -33,6 +33,40 @@ */ #define STK1160_DCTRL 0x100 +/* + * Decimation Control Register: + * Byte 104: Horizontal Decimation Line Unit Count + * Byte 105: Vertical Decimation Line Unit Count + * Byte 106: Decimation Control + * Bit 0 - Horizontal Decimation Control + * 0 Horizontal decimation is disabled. + * 1 Horizontal decimation is enabled. + * Bit 1 - Decimates Half or More Column + * 0 Decimates less than half from original column, + * send count unit (0x105) before each unit skipped. + * 1 Decimates half or more from original column, + * skip count unit (0x105) before each unit sent. + * Bit 2 - Vertical Decimation Control + * 0 Vertical decimation is disabled. + * 1 Vertical decimation is enabled. + * Bit 3 - Vertical Greater or Equal to Half + * 0 Decimates less than half from original row, + * send count unit (0x105) before each unit skipped. + * 1 Decimates half or more from original row, + * skip count unit (0x105) before each unit sent. + * Bit 4 - Decimation Unit + * 0 Decimation will work with 2 rows or columns per unit. + * 1 Decimation will work with 4 rows or columns per unit. + */ +#define STK1160_DMCTRL_H_UNITS 0x104 +#define STK1160_DMCTRL_V_UNITS 0x105 +#define STK1160_DMCTRL 0x106 +#define STK1160_H_DEC_EN BIT(0) +#define STK1160_H_DEC_MODE BIT(1) +#define STK1160_V_DEC_EN BIT(2) +#define STK1160_V_DEC_MODE BIT(3) +#define STK1160_DEC_UNIT_SIZE BIT(4) + /* Capture Frame Start Position */ #define STK116_CFSPO 0x110 #define STK116_CFSPO_STX_L 0x110 diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c index b4b737b0b35a..e12b10352871 100644 --- a/drivers/media/usb/stk1160/stk1160-v4l.c +++ b/drivers/media/usb/stk1160/stk1160-v4l.c @@ -42,6 +42,17 @@ static bool keep_buffers; module_param(keep_buffers, bool, 0644); MODULE_PARM_DESC(keep_buffers, "don't release buffers upon stop streaming"); +enum stk1160_decimate_mode { + STK1160_DECIMATE_MORE_THAN_HALF, + STK1160_DECIMATE_LESS_THAN_HALF, +}; + +struct stk1160_decimate_ctrl { + bool col_en, row_en; + enum stk1160_decimate_mode col_mode, row_mode; + unsigned int col_n, row_n; +}; + /* supported video standards */ static struct stk1160_fmt format[] = { { @@ -51,6 +62,19 @@ static struct stk1160_fmt format[] = { } }; +/* + * Helper to find the next divisor that results in modulo being zero. + * This is required to guarantee valid decimation unit counts. + */ +static unsigned int +div_round_integer(unsigned int x, unsigned int y) +{ + for (;; y++) { + if (x % y == 0) + return x / y; + } +} + static void stk1160_set_std(struct stk1160 *dev) { int i; @@ -106,6 +130,41 @@ static void stk1160_set_std(struct stk1160 *dev) } +static void stk1160_set_fmt(struct stk1160 *dev, + struct stk1160_decimate_ctrl *ctrl) +{ + u32 val = 0; + + if (ctrl) { + /* + * Since the format is UYVY, the device must skip or send + * a number of rows/columns multiple of four. This way, the + * colour format is preserved. The STK1160_DEC_UNIT_SIZE bit + * does exactly this. + */ + val |= STK1160_DEC_UNIT_SIZE; + val |= ctrl->col_en ? STK1160_H_DEC_EN : 0; + val |= ctrl->row_en ? STK1160_V_DEC_EN : 0; + val |= ctrl->col_mode == + STK1160_DECIMATE_MORE_THAN_HALF ? + STK1160_H_DEC_MODE : 0; + val |= ctrl->row_mode == + STK1160_DECIMATE_MORE_THAN_HALF ? + STK1160_V_DEC_MODE : 0; + + /* Horizontal count units */ + stk1160_write_reg(dev, STK1160_DMCTRL_H_UNITS, ctrl->col_n); + /* Vertical count units */ + stk1160_write_reg(dev, STK1160_DMCTRL_V_UNITS, ctrl->row_n); + + stk1160_dbg("decimate 0x%x, column units %d, row units %d\n", + val, ctrl->col_n, ctrl->row_n); + } + + /* Decimation control */ + stk1160_write_reg(dev, STK1160_DMCTRL, val); +} + /* * Set a new alternate setting. * Returns true is dev->max_pkt_size has changed, false otherwise. @@ -323,27 +382,115 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int stk1160_try_fmt(struct stk1160 *dev, struct v4l2_format *f, + struct stk1160_decimate_ctrl *ctrl) +{ + unsigned int width, height; + unsigned int base_width, base_height; + unsigned int col_n, row_n; + enum stk1160_decimate_mode col_mode, row_mode; + bool col_en, row_en; + + base_width = 720; + base_height = (dev->norm & V4L2_STD_525_60) ? 480 : 576; + + /* Minimum width and height is 5% the frame size */ + width = clamp_t(unsigned int, f->fmt.pix.width, + base_width / 20, base_width); + height = clamp_t(unsigned int, f->fmt.pix.height, + base_height / 20, base_height); + + /* Let's set default no decimation values */ + col_n = 0; + row_n = 0; + col_en = false; + row_en = false; + f->fmt.pix.width = base_width; + f->fmt.pix.height = base_height; + row_mode = STK1160_DECIMATE_LESS_THAN_HALF; + col_mode = STK1160_DECIMATE_LESS_THAN_HALF; + + if (width < base_width && width > base_width / 2) { + /* + * The device will send count units for each + * unit skipped. This means count unit is: + * + * n = width / (frame width - width) + * + * And the width is: + * + * width = (n / n + 1) * frame width + */ + col_n = div_round_integer(width, base_width - width); + if (col_n > 0 && col_n <= 255) { + col_en = true; + col_mode = STK1160_DECIMATE_LESS_THAN_HALF; + f->fmt.pix.width = (base_width * col_n) / (col_n + 1); + } + + } else if (width <= base_width / 2) { + + /* + * The device will skip count units for each + * unit sent. This means count is: + * + * n = (frame width / width) - 1 + * + * And the width is: + * + * width = frame width / (n + 1) + */ + col_n = div_round_integer(base_width, width) - 1; + if (col_n > 0 && col_n <= 255) { + col_en = true; + col_mode = STK1160_DECIMATE_MORE_THAN_HALF; + f->fmt.pix.width = base_width / (col_n + 1); + } + } + + if (height < base_height && height > base_height / 2) { + row_n = div_round_integer(height, base_height - height); + if (row_n > 0 && row_n <= 255) { + row_en = true; + row_mode = STK1160_DECIMATE_LESS_THAN_HALF; + f->fmt.pix.height = (base_height * row_n) / (row_n + 1); + } + + } else if (height <= base_height / 2) { + row_n = div_round_integer(base_height, height) - 1; + if (row_n > 0 && row_n <= 255) { + row_en = true; + row_mode = STK1160_DECIMATE_MORE_THAN_HALF; + f->fmt.pix.height = base_height / (row_n + 1); + } + } + + f->fmt.pix.pixelformat = dev->fmt->fourcc; + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + if (ctrl) { + ctrl->col_en = col_en; + ctrl->col_n = col_n; + ctrl->col_mode = col_mode; + ctrl->row_en = row_en; + ctrl->row_n = row_n; + ctrl->row_mode = row_mode; + } + + stk1160_dbg("width %d, height %d\n", + f->fmt.pix.width, f->fmt.pix.height); + return 0; +} + static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) + struct v4l2_format *f) { struct stk1160 *dev = video_drvdata(file); - /* - * User can't choose size at his own will, - * so we just return him the current size chosen - * at standard selection. - * TODO: Implement frame scaling? - */ - - f->fmt.pix.pixelformat = dev->fmt->fourcc; - f->fmt.pix.width = dev->width; - f->fmt.pix.height = dev->height; - f->fmt.pix.field = V4L2_FIELD_INTERLACED; - f->fmt.pix.bytesperline = dev->width * 2; - f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - - return 0; + return stk1160_try_fmt(dev, f, NULL); } static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, @@ -351,13 +498,18 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, { struct stk1160 *dev = video_drvdata(file); struct vb2_queue *q = &dev->vb_vidq; + struct stk1160_decimate_ctrl ctrl; + int rc; if (vb2_is_busy(q)) return -EBUSY; - vidioc_try_fmt_vid_cap(file, priv, f); - - /* We don't support any format changes */ + rc = stk1160_try_fmt(dev, f, &ctrl); + if (rc < 0) + return rc; + dev->width = f->fmt.pix.width; + dev->height = f->fmt.pix.height; + stk1160_set_fmt(dev, &ctrl); return 0; } @@ -393,22 +545,15 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) return -ENODEV; /* We need to set this now, before we call stk1160_set_std */ + dev->width = 720; + dev->height = (norm & V4L2_STD_525_60) ? 480 : 576; dev->norm = norm; - /* This is taken from saa7115 video decoder */ - if (dev->norm & V4L2_STD_525_60) { - dev->width = 720; - dev->height = 480; - } else if (dev->norm & V4L2_STD_625_50) { - dev->width = 720; - dev->height = 576; - } else { - stk1160_err("invalid standard\n"); - return -EINVAL; - } - stk1160_set_std(dev); + /* Calling with NULL disables frame decimation */ + stk1160_set_fmt(dev, NULL); + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);