From d4d9360bf702890b5d3b1b62d8619a2690dd3278 Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Tue, 22 Oct 2019 20:55:18 +0200 Subject: [PATCH] ASoC: rsnd: dma: set bus width to data width for monaural data According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus), in case of monaural data writing or reading through Audio-DMAC, it's always in Left Justified format, so both src and dst DMA Bus width should be equal to physical data width. Therefore set src and dst's DMA bus width to: - [monaural case] data width - [non-monaural case] 32bits (as prior applying the patch) Cc: Andrew Gabbasov Cc: Timo Wischer Signed-off-by: Jiada Wang Signed-off-by: Eugeniu Rosca Link: https://lore.kernel.org/r/20191022185518.12838-1-erosca@de.adit-jv.com Signed-off-by: Mark Brown --- sound/soc/sh/rcar/dma.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index 0324a5c39619..bcb6d5960661 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -165,14 +165,40 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod, struct device *dev = rsnd_priv_to_dev(priv); struct dma_async_tx_descriptor *desc; struct dma_slave_config cfg = {}; + enum dma_slave_buswidth buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; int is_play = rsnd_io_is_play(io); int ret; + /* + * in case of monaural data writing or reading through Audio-DMAC + * data is always in Left Justified format, so both src and dst + * DMA Bus width need to be set equal to physical data width. + */ + if (rsnd_runtime_channel_original(io) == 1) { + struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); + int bits = snd_pcm_format_physical_width(runtime->format); + + switch (bits) { + case 8: + buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case 16: + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case 32: + buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + default: + dev_err(dev, "invalid format width %d\n", bits); + return -EINVAL; + } + } + cfg.direction = is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; cfg.src_addr = dma->src_addr; cfg.dst_addr = dma->dst_addr; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.src_addr_width = buswidth; + cfg.dst_addr_width = buswidth; dev_dbg(dev, "%s %pad -> %pad\n", rsnd_mod_name(mod),