redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

dt-bindings: serial: Convert rs485 bindings to json-schema

Browse source 
Convert rs485 binding to yaml style file.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Benjamin Gaignard 2020-01-22 10:55:57 +01:00 committed by Rob Herring
parent c5c689d322
commit d50f974c4f
2 changed files with 46 additions and 31 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

32
Documentation/devicetree/bindings/serial/rs485.txt
View file

@ -1,31 +1 @@
* RS485 serial communications
The RTS signal is capable of automatically controlling line direction for
the built-in half-duplex mode.
The properties described hereafter shall be given to a half-duplex capable
UART node.
Optional properties:
- rs485-rts-delay: prop-encoded-array <a b> where:
* a is the delay between rts signal and beginning of data sent in milliseconds.
it corresponds to the delay before sending data.
* b is the delay between end of data sent and rts signal in milliseconds
it corresponds to the delay after sending data and actual release of the line.
If this property is not specified, <0 0> is assumed.
- rs485-rts-active-low: drive RTS low when sending (default is high).
- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
feature at boot time. It can be disabled later with proper ioctl.
- rs485-rx-during-tx: empty property that enables the receiving of data even
while sending data.
RS485 example for Atmel USART:
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x4000>;
interrupts = <7>;
atmel,use-dma-rx;
atmel,use-dma-tx;
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 200>; // in milliseconds
};
See rs485.yaml

45
Documentation/devicetree/bindings/serial/rs485.yaml Normal file
View file

@ -0,0 +1,45 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/serial/rs485.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RS485 serial communications Bindings
description: The RTS signal is capable of automatically controlling
line direction for the built-in half-duplex mode.
The properties described hereafter shall be given to a
half-duplex capable UART node.
maintainers:
- Rob Herring <robh@kernel.org>
properties:
rs485-rts-delay:
description: prop-encoded-array <a b>
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
items:
- description:
Delay between rts signal and beginning of data sent in milliseconds.
It corresponds to the delay before sending data.
default: 0
maximum: 1000
- description:
Delay between end of data sent and rts signal in milliseconds.
It corresponds to the delay after sending data and actual release of the line.
default: 0
maximum: 1000
rs485-rts-active-low:
description: drive RTS low when sending (default is high).
$ref: /schemas/types.yaml#/definitions/flag
linux,rs485-enabled-at-boot-time:
description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
$ref: /schemas/types.yaml#/definitions/flag
rs485-rx-during-tx:
description: enables the receiving of data even while sending data.
$ref: /schemas/types.yaml#/definitions/flag