redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge ../powerpc-merge

hifive-unleashed-5.1
Paul Mackerras 2006-02-10 16:51:29 +11:00
parent 8f75015f33 ad71f123a9
commit d6d93856cb
485 changed files with 6388 additions and 5694 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Documentation/feature-removal-schedule.txt
View File

@ -162,3 +162,12 @@ What: pci_module_init(driver)
When: January 2007
Why: Is replaced by pci_register_driver(pci_driver).
Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
---------------------------
What: I2C interface of the it87 driver
When: January 2007
Why: The ISA interface is faster and should be always available. The I2C
probing is also known to cause trouble in at least one case (see
bug #5889.)
Who: Jean Delvare <khali@linux-fr.org>

105
Documentation/hwmon/f71805f 100644
View File

@ -0,0 +1,105 @@
Kernel driver f71805f
=====================
Supported chips:
* Fintek F71805F/FG
Prefix: 'f71805f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Provided by Fintek on request
Author: Jean Delvare <khali@linux-fr.org>
Thanks to Denis Kieft from Barracuda Networks for the donation of a
test system (custom Jetway K8M8MS motherboard, with CPU and RAM) and
for providing initial documentation.
Thanks to Kris Chen from Fintek for answering technical questions and
providing additional documentation.
Thanks to Chris Lin from Jetway for providing wiring schematics and
anwsering technical questions.
Description
-----------
The Fintek F71805F/FG Super I/O chip includes complete hardware monitoring
capabilities. It can monitor up to 9 voltages (counting its own power
source), 3 fans and 3 temperature sensors.
This chip also has fan controlling features, using either DC or PWM, in
three different modes (one manual, two automatic). The driver doesn't
support these features yet.
The driver assumes that no more than one chip is present, which seems
reasonable.
Voltage Monitoring
------------------
Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
range is thus from 0 to 2.040 V. Voltage values outside of this range
need external resistors. An exception is in0, which is used to monitor
the chip's own power source (+3.3V), and is divided internally by a
factor 2.
The two LSB of the voltage limit registers are not used (always 0), so
you can only set the limits in steps of 32 mV (before scaling).
The wirings and resistor values suggested by Fintek are as follow:
pin expected
name use R1 R2 divider raw val.
in0 VCC VCC3.3V int. int. 2.00 1.65 V
in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V (1)
in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V (2)
in4 VIN4 VCC5V 200K 47K 5.25 0.95 V
in5 VIN5 +12V 200K 20K 11.00 1.05 V
in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1)
in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
(1) Depends on your hardware setup.
(2) Obviously not correct, swapping R1 and R2 would make more sense.
These values can be used as hints at best, as motherboard manufacturers
are free to use a completely different setup. As a matter of fact, the
Jetway K8M8MS uses a significantly different setup. You will have to
find out documentation about your own motherboard, and edit sensors.conf
accordingly.
Each voltage measured has associated low and high limits, each of which
triggers an alarm when crossed.
Fan Monitoring
--------------
Fan rotation speeds are reported as 12-bit values from a gated clock
signal. Speeds down to 366 RPM can be measured. There is no theoretical
high limit, but values over 6000 RPM seem to cause problem. The effective
resolution is much lower than you would expect, the step between different
register values being 10 rather than 1.
The chip assumes 2 pulse-per-revolution fans.
An alarm is triggered if the rotation speed drops below a programmable
limit or is too low to be measured.
Temperature Monitoring
----------------------
Temperatures are reported in degrees Celsius. Each temperature measured
has a high limit, those crossing triggers an alarm. There is an associated
hysteresis value, below which the temperature has to drop before the
alarm is cleared.
All temperature channels are external, there is no embedded temperature
sensor. Each channel can be used for connecting either a thermal diode
or a thermistor. The driver reports the currently selected mode, but
doesn't allow changing it. In theory, the BIOS should have configured
everything properly.

2
Documentation/hwmon/it87
View File

@ -9,7 +9,7 @@ Supported chips:
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
Addresses scanned: I2C 0x28 - 0x2f
Addresses scanned: I2C 0x2d
from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/

18
Documentation/hwmon/sysfs-interface
View File

@ -179,11 +179,12 @@ temp[1-*]_auto_point[1-*]_temp_hyst
****************
temp[1-3]_type Sensor type selection.
Integers 1, 2, 3 or thermistor Beta value (3435)
Integers 1 to 4 or thermistor Beta value (typically 3435)
Read/Write.
1: PII/Celeron Diode
2: 3904 transistor
3: thermal diode
4: thermistor (default/unknown Beta)
Not all types are supported by all chips
temp[1-4]_max Temperature max value.
@ -261,6 +262,21 @@ alarms Alarm bitmask.
of individual bits.
Bits are defined in kernel/include/sensors.h.
alarms_in Alarm bitmask relative to in (voltage) channels
Read only
A '1' bit means an alarm, LSB corresponds to in0 and so on
Prefered to 'alarms' for newer chips
alarms_fan Alarm bitmask relative to fan channels
Read only
A '1' bit means an alarm, LSB corresponds to fan1 and so on
Prefered to 'alarms' for newer chips
alarms_temp Alarm bitmask relative to temp (temperature) channels
Read only
A '1' bit means an alarm, LSB corresponds to temp1 and so on
Prefered to 'alarms' for newer chips
beep_enable Beep/interrupt enable
0 to disable.
1 to enable.

4
Documentation/i2c/busses/i2c-sis69x → Documentation/i2c/busses/i2c-sis96x
View File

@ -7,7 +7,7 @@ Supported adapters:
Any combination of these host bridges:
645, 645DX (aka 646), 648, 650, 651, 655, 735, 745, 746
and these south bridges:
961, 962, 963(L)
961, 962, 963(L)
Author: Mark M. Hoffman <mhoffman@lightlink.com>
@ -29,7 +29,7 @@ The command "lspci" as root should produce something like these lines:
or perhaps this...
00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0645
00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0645
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0961
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016

60
Documentation/powerpc/booting-without-of.txt
View File

@ -44,7 +44,6 @@
compiler and the textural representation of
the tree that can be "compiled" by dtc.
November 21, 2005: Rev 0.5
- Additions/generalizations for 32-bit
- Changed to reflect the new arch/powerpc
@ -1307,6 +1306,65 @@ platforms are moved over to use the flattened-device-tree model.
};
f) Freescale SOC USB controllers
The device node for a USB controller that is part of a Freescale
SOC is as described in the document "Open Firmware Recommended
Practice : Universal Serial Bus" with the following modifications
and additions :
Required properties :
- compatible : Should be "fsl-usb2-mph" for multi port host usb
controllers, or "fsl-usb2-dr" for dual role usb controllers
- phy_type : For multi port host usb controllers, should be one of
"ulpi", or "serial". For dual role usb controllers, should be
one of "ulpi", "utmi", "utmi_wide", or "serial".
- reg : Offset and length of the register set for the device
- port0 : boolean; if defined, indicates port0 is connected for
fsl-usb2-mph compatible controllers. Either this property or
"port1" (or both) must be defined for "fsl-usb2-mph" compatible
controllers.
- port1 : boolean; if defined, indicates port1 is connected for
fsl-usb2-mph compatible controllers. Either this property or
"port0" (or both) must be defined for "fsl-usb2-mph" compatible
controllers.
Recommended properties :
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Example multi port host usb controller device node :
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <27 1>;
phy_type = "ulpi";
port0;
port1;
};
Example dual role usb controller device node :
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <700>;
interrupts = <26 1>;
phy = "ulpi";
};
More devices will be defined as this spec matures.

23
Documentation/spi/butterfly
View File

@ -12,13 +12,20 @@ You can make this adapter from an old printer cable and solder things
directly to the Butterfly. Or (if you have the parts and skills) you
can come up with something fancier, providing ciruit protection to the
Butterfly and the printer port, or with a better power supply than two
signal pins from the printer port.
signal pins from the printer port. Or for that matter, you can use
similar cables to talk to many AVR boards, even a breadboard.
This is more powerful than "ISP programming" cables since it lets kernel
SPI protocol drivers interact with the AVR, and could even let the AVR
issue interrupts to them. Later, your protocol driver should work
easily with a "real SPI controller", instead of this bitbanger.
The first cable connections will hook Linux up to one SPI bus, with the
AVR and a DataFlash chip; and to the AVR reset line. This is all you
need to reflash the firmware, and the pins are the standard Atmel "ISP"
connector pins (used also on non-Butterfly AVR boards).
connector pins (used also on non-Butterfly AVR boards). On the parport
side this is like "sp12" programming cables.
Signal Butterfly Parport (DB-25)
------ --------- ---------------
@ -40,10 +47,14 @@ by clearing PORTB.[0-3]); (b) configure the mtd_dataflash driver; and
SELECT = J400.PB0/nSS = pin 17/C3,nSELECT
GND = J400.GND = pin 24/GND
The "USI" controller, using J405, can be used for a second SPI bus. That
would let you talk to the AVR over SPI, running firmware that makes it act
as an SPI slave, while letting either Linux or the AVR use the DataFlash.
There are plenty of spare parport pins to wire this one up, such as:
Or you could flash firmware making the AVR into an SPI slave (keeping the
DataFlash in reset) and tweak the spi_butterfly driver to make it bind to
the driver for your custom SPI-based protocol.
The "USI" controller, using J405, can also be used for a second SPI bus.
That would let you talk to the AVR using custom SPI-with-USI firmware,
while letting either Linux or the AVR use the DataFlash. There are plenty
of spare parport pins to wire this one up, such as:
Signal Butterfly Parport (DB-25)
------ --------- ---------------

295
Documentation/unshare.txt 100644
View File

@ -0,0 +1,295 @@
unshare system call:
--------------------
This document describes the new system call, unshare. The document
provides an overview of the feature, why it is needed, how it can
be used, its interface specification, design, implementation and
how it can be tested.
Change Log:
-----------
version 0.1 Initial document, Janak Desai (janak@us.ibm.com), Jan 11, 2006
Contents:
---------
1) Overview
2) Benefits
3) Cost
4) Requirements
5) Functional Specification
6) High Level Design
7) Low Level Design
8) Test Specification
9) Future Work
1) Overview
-----------
Most legacy operating system kernels support an abstraction of threads
as multiple execution contexts within a process. These kernels provide
special resources and mechanisms to maintain these "threads". The Linux
kernel, in a clever and simple manner, does not make distinction
between processes and "threads". The kernel allows processes to share
resources and thus they can achieve legacy "threads" behavior without
requiring additional data structures and mechanisms in the kernel. The
power of implementing threads in this manner comes not only from
its simplicity but also from allowing application programmers to work
outside the confinement of all-or-nothing shared resources of legacy
threads. On Linux, at the time of thread creation using the clone system
call, applications can selectively choose which resources to share
between threads.
unshare system call adds a primitive to the Linux thread model that
allows threads to selectively 'unshare' any resources that were being
shared at the time of their creation. unshare was conceptualized by
Al Viro in the August of 2000, on the Linux-Kernel mailing list, as part
of the discussion on POSIX threads on Linux. unshare augments the
usefulness of Linux threads for applications that would like to control
shared resources without creating a new process. unshare is a natural
addition to the set of available primitives on Linux that implement
the concept of process/thread as a virtual machine.
2) Benefits
-----------
unshare would be useful to large application frameworks such as PAM
where creating a new process to control sharing/unsharing of process
resources is not possible. Since namespaces are shared by default
when creating a new process using fork or clone, unshare can benefit
even non-threaded applications if they have a need to disassociate
from default shared namespace. The following lists two use-cases
where unshare can be used.
2.1 Per-security context namespaces
-----------------------------------
unshare can be used to implement polyinstantiated directories using
the kernel's per-process namespace mechanism. Polyinstantiated directories,
such as per-user and/or per-security context instance of /tmp, /var/tmp or
per-security context instance of a user's home directory, isolate user
processes when working with these directories. Using unshare, a PAM
module can easily setup a private namespace for a user at login.
Polyinstantiated directories are required for Common Criteria certification
with Labeled System Protection Profile, however, with the availability
of shared-tree feature in the Linux kernel, even regular Linux systems
can benefit from setting up private namespaces at login and
polyinstantiating /tmp, /var/tmp and other directories deemed
appropriate by system administrators.
2.2 unsharing of virtual memory and/or open files
-------------------------------------------------
Consider a client/server application where the server is processing
client requests by creating processes that share resources such as
virtual memory and open files. Without unshare, the server has to
decide what needs to be shared at the time of creating the process
which services the request. unshare allows the server an ability to
disassociate parts of the context during the servicing of the
request. For large and complex middleware application frameworks, this
ability to unshare after the process was created can be very
useful.
3) Cost
-------
In order to not duplicate code and to handle the fact that unshare
works on an active task (as opposed to clone/fork working on a newly
allocated inactive task) unshare had to make minor reorganizational
changes to copy_* functions utilized by clone/fork system call.
There is a cost associated with altering existing, well tested and
stable code to implement a new feature that may not get exercised
extensively in the beginning. However, with proper design and code
review of the changes and creation of an unshare test for the LTP
the benefits of this new feature can exceed its cost.
4) Requirements
---------------
unshare reverses sharing that was done using clone(2) system call,
so unshare should have a similar interface as clone(2). That is,
since flags in clone(int flags, void *stack) specifies what should
be shared, similar flags in unshare(int flags) should specify
what should be unshared. Unfortunately, this may appear to invert
the meaning of the flags from the way they are used in clone(2).
However, there was no easy solution that was less confusing and that
allowed incremental context unsharing in future without an ABI change.
unshare interface should accommodate possible future addition of
new context flags without requiring a rebuild of old applications.
If and when new context flags are added, unshare design should allow
incremental unsharing of those resources on an as needed basis.
5) Functional Specification
---------------------------
NAME
unshare - disassociate parts of the process execution context
SYNOPSIS
#include <sched.h>
int unshare(int flags);
DESCRIPTION
unshare allows a process to disassociate parts of its execution
context that are currently being shared with other processes. Part
of execution context, such as the namespace, is shared by default
when a new process is created using fork(2), while other parts,
such as the virtual memory, open file descriptors, etc, may be
shared by explicit request to share them when creating a process
using clone(2).
The main use of unshare is to allow a process to control its
shared execution context without creating a new process.
The flags argument specifies one or bitwise-or'ed of several of
the following constants.
CLONE_FS
If CLONE_FS is set, file system information of the caller
is disassociated from the shared file system information.
CLONE_FILES
If CLONE_FILES is set, the file descriptor table of the
caller is disassociated from the shared file descriptor
table.
CLONE_NEWNS
If CLONE_NEWNS is set, the namespace of the caller is
disassociated from the shared namespace.
CLONE_VM
If CLONE_VM is set, the virtual memory of the caller is
disassociated from the shared virtual memory.
RETURN VALUE
On success, zero returned. On failure, -1 is returned and errno is
ERRORS
EPERM CLONE_NEWNS was specified by a non-root process (process
without CAP_SYS_ADMIN).
ENOMEM Cannot allocate sufficient memory to copy parts of caller's
context that need to be unshared.
EINVAL Invalid flag was specified as an argument.
CONFORMING TO
The unshare() call is Linux-specific and should not be used
in programs intended to be portable.
SEE ALSO
clone(2), fork(2)
6) High Level Design
--------------------
Depending on the flags argument, the unshare system call allocates
appropriate process context structures, populates it with values from
the current shared version, associates newly duplicated structures
with the current task structure and releases corresponding shared
versions. Helper functions of clone (copy_*) could not be used
directly by unshare because of the following two reasons.
1) clone operates on a newly allocated not-yet-active task
structure, where as unshare operates on the current active
task. Therefore unshare has to take appropriate task_lock()
before associating newly duplicated context structures
2) unshare has to allocate and duplicate all context structures
that are being unshared, before associating them with the
current task and releasing older shared structures. Failure
do so will create race conditions and/or oops when trying
to backout due to an error. Consider the case of unsharing
both virtual memory and namespace. After successfully unsharing
vm, if the system call encounters an error while allocating
new namespace structure, the error return code will have to
reverse the unsharing of vm. As part of the reversal the
system call will have to go back to older, shared, vm
structure, which may not exist anymore.
Therefore code from copy_* functions that allocated and duplicated
current context structure was moved into new dup_* functions. Now,
copy_* functions call dup_* functions to allocate and duplicate
appropriate context structures and then associate them with the
task structure that is being constructed. unshare system call on
the other hand performs the following:
1) Check flags to force missing, but implied, flags
2) For each context structure, call the corresponding unshare
helper function to allocate and duplicate a new context
structure, if the appropriate bit is set in the flags argument.
3) If there is no error in allocation and duplication and there
are new context structures then lock the current task structure,
associate new context structures with the current task structure,
and release the lock on the current task structure.
4) Appropriately release older, shared, context structures.
7) Low Level Design
-------------------
Implementation of unshare can be grouped in the following 4 different
items:
a) Reorganization of existing copy_* functions
b) unshare system call service function
c) unshare helper functions for each different process context
d) Registration of system call number for different architectures
7.1) Reorganization of copy_* functions
Each copy function such as copy_mm, copy_namespace, copy_files,
etc, had roughly two components. The first component allocated
and duplicated the appropriate structure and the second component
linked it to the task structure passed in as an argument to the copy
function. The first component was split into its own function.
These dup_* functions allocated and duplicated the appropriate
context structure. The reorganized copy_* functions invoked
their corresponding dup_* functions and then linked the newly
duplicated structures to the task structure with which the
copy function was called.
7.2) unshare system call service function
* Check flags
Force implied flags. If CLONE_THREAD is set force CLONE_VM.
If CLONE_VM is set, force CLONE_SIGHAND. If CLONE_SIGHAND is
set and signals are also being shared, force CLONE_THREAD. If
CLONE_NEWNS is set, force CLONE_FS.
* For each context flag, invoke the corresponding unshare_*
helper routine with flags passed into the system call and a
reference to pointer pointing the new unshared structure
* If any new structures are created by unshare_* helper
functions, take the task_lock() on the current task,
modify appropriate context pointers, and release the
task lock.
* For all newly unshared structures, release the corresponding
older, shared, structures.
7.3) unshare_* helper functions
For unshare_* helpers corresponding to CLONE_SYSVSEM, CLONE_SIGHAND,
and CLONE_THREAD, return -EINVAL since they are not implemented yet.
For others, check the flag value to see if the unsharing is
required for that structure. If it is, invoke the corresponding
dup_* function to allocate and duplicate the structure and return
a pointer to it.
7.4) Appropriately modify architecture specific code to register the
the new system call.
8) Test Specification
---------------------
The test for unshare should test the following:
1) Valid flags: Test to check that clone flags for signal and
signal handlers, for which unsharing is not implemented
yet, return -EINVAL.
2) Missing/implied flags: Test to make sure that if unsharing
namespace without specifying unsharing of filesystem, correctly
unshares both namespace and filesystem information.
3) For each of the four (namespace, filesystem, files and vm)
supported unsharing, verify that the system call correctly
unshares the appropriate structure. Verify that unsharing
them individually as well as in combination with each
other works as expected.
4) Concurrent execution: Use shared memory segments and futex on
an address in the shm segment to synchronize execution of
about 10 threads. Have a couple of threads execute execve,
a couple _exit and the rest unshare with different combination
of flags. Verify that unsharing is performed as expected and
that there are no oops or hangs.
9) Future Work
--------------
The current implementation of unshare does not allow unsharing of
signals and signal handlers. Signals are complex to begin with and
to unshare signals and/or signal handlers of a currently running
process is even more complex. If in the future there is a specific
need to allow unsharing of signals and/or signal handlers, it can
be incrementally added to unshare without affecting legacy
applications using unshare.

2
Documentation/video4linux/CARDLIST.cx88
View File

@ -42,4 +42,4 @@
41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [0070:9800,0070:9802]
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50]
44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]

6
Documentation/video4linux/CARDLIST.saa7134
View File

@ -1,7 +1,7 @@
0 -> UNKNOWN/GENERIC
1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138]
3 -> LifeView FlyVIDEO2000 [5168:0138]
3 -> LifeView/Typhoon FlyVIDEO2000 [5168:0138,4e42:0138]
4 -> EMPRESS [1131:6752]
5 -> SKNet Monster TV [1131:4e85]
6 -> Tevion MD 9717
@ -53,12 +53,12 @@
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
55 -> LifeView FlyDVB-T DUO [5168:0502,5168:0306]
55 -> LifeView FlyDVB-T DUO [5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0351,1421:0370,1421:1370]
59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
60 -> LifeView/Typhoon FlyDVB-T Duo Cardbus [5168:0502,4e42:0502]
61 -> Philips TOUGH DVB-T reference design [1131:2004]
62 -> Compro VideoMate TV Gold+II
63 -> Kworld Xpert TV PVR7134

17
MAINTAINERS
View File

@ -540,7 +540,8 @@ S: Supported
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@brturbo.com.br
M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
@ -837,11 +838,12 @@ S: Maintained
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: linux-dvb-maintainer@linuxtv.org
M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Supported
S: Maintained
EATA-DMA SCSI DRIVER
P: Michael Neuffer
@ -929,6 +931,12 @@ M: sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
L: ext3-users@redhat.com
S: Maintained
F71805F HARDWARE MONITORING DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
S: Maintained
FARSYNC SYNCHRONOUS DRIVER
P: Kevin Curtis
M: kevin.curtis@farsite.co.uk
@ -2956,7 +2964,8 @@ S: Maintained
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
M: mchehab@brturbo.com.br
M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git

2
Makefile
View File

@ -442,7 +442,7 @@ export KBUILD_DEFCONFIG
config %config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux
$(Q)$(MAKE) $(build)=scripts/kconfig $@
$(Q)$(MAKE) .kernelrelease
$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
else
# ===========================================================================

25
arch/alpha/kernel/smp.c
View File

@ -73,9 +73,6 @@ cpumask_t cpu_online_map;
EXPORT_SYMBOL(cpu_online_map);
/* cpus reported in the hwrpb */
static unsigned long hwrpb_cpu_present_mask __initdata = 0;
int smp_num_probed; /* Internal processor count */
int smp_num_cpus = 1; /* Number that came online. */
@ -442,7 +439,7 @@ setup_smp(void)
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
/* Assume here that "whami" == index */
hwrpb_cpu_present_mask |= (1UL << i);
cpu_set(i, cpu_possible_map);
cpu->pal_revision = boot_cpu_palrev;
}
@ -453,12 +450,12 @@ setup_smp(void)
}
} else {
smp_num_probed = 1;
hwrpb_cpu_present_mask = (1UL << boot_cpuid);
cpu_set(boot_cpuid, cpu_possible_map);
}
cpu_present_mask = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
smp_num_probed, hwrpb_cpu_present_mask);
smp_num_probed, cpu_possible_map.bits[0]);
}
/*
@ -467,8 +464,6 @@ setup_smp(void)
void __init
smp_prepare_cpus(unsigned int max_cpus)
{
int cpu_count, i;
/* Take care of some initial bookkeeping. */
memset(ipi_data, 0, sizeof(ipi_data));
@ -486,19 +481,7 @@ smp_prepare_cpus(unsigned int max_cpus)
printk(KERN_INFO "SMP starting up secondaries.\n");
cpu_count = 1;
for (i = 0; (i < NR_CPUS) && (cpu_count < max_cpus); i++) {
if (i == boot_cpuid)
continue;
if (((hwrpb_cpu_present_mask >> i) & 1) == 0)
continue;
cpu_set(i, cpu_possible_map);
cpu_count++;
}
smp_num_cpus = cpu_count;
smp_num_cpus = smp_num_probed;
}
void __devinit

49
arch/arm/Kconfig
View File

@ -10,9 +10,9 @@ config ARM
default y
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM ltd and targeted at embedded applications and
licensed by ARM Ltd and targeted at embedded applications and
handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
manufactured, but legacy ARM-based PC hardware remains popular in
manufactured, but legacy ARM-based PC hardware remains popular in
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
@ -69,6 +69,9 @@ config GENERIC_ISA_DMA
config FIQ
bool
config ARCH_MTD_XIP
bool
source "init/Kconfig"
menu "System Type"
@ -81,45 +84,62 @@ config ARCH_CLPS7500
bool "Cirrus-CL-PS7500FE"
select TIMER_ACORN
select ISA
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_CLPS711X
bool "CLPS711x/EP721x-based"
help
Support for Cirrus Logic 711x/721x based boards.
config ARCH_CO285
bool "Co-EBSA285"
select FOOTBRIDGE
select FOOTBRIDGE_ADDIN
help
Support for Intel's EBSA285 companion chip.
config ARCH_EBSA110
bool "EBSA-110"
select ISA
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an onboard
from Digital. It has limited hardware on-board, including an
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_INTEGRATOR
bool "Integrator"
select ARM_AMBA
select ICST525
help
Support for ARM's Integrator platform.
config ARCH_IOP3XX
bool "IOP3xx-based"
select PCI
help
Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
select DMABOUNCE
select PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
@ -136,6 +156,9 @@ config ARCH_L7200
config ARCH_PXA
bool "PXA2xx-based"
select ARCH_MTD_XIP
help
Support for Intel's PXA2XX processor line.
config ARCH_RPC
bool "RiscPC"
@ -152,19 +175,25 @@ config ARCH_SA1100
bool "SA1100-based"
select ISA
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_MTD_XIP
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derviatives).
the Samsung SMDK2410 development board (and derivatives).
config ARCH_SHARK
bool "Shark"
select ISA
select ISA_DMA
select PCI
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_LH7A40X
bool "Sharp LH7A40X"
@ -176,6 +205,8 @@ config ARCH_LH7A40X
config ARCH_OMAP
bool "TI OMAP"
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
config ARCH_VERSATILE
bool "Versatile"
@ -194,6 +225,8 @@ config ARCH_REALVIEW
config ARCH_IMX
bool "IMX"
help
Support for Motorola's i.MX family of processors (MX1, MXL).
config ARCH_H720X
bool "Hynix-HMS720x-based"
@ -210,8 +243,8 @@ config ARCH_AAEC2000
config ARCH_AT91RM9200
bool "AT91RM9200"
help
Say Y here if you intend to run this kernel on an AT91RM9200-based
board.
Say Y here if you intend to run this kernel on an Atmel
AT91RM9200-based board.
endchoice
@ -417,8 +450,8 @@ config AEABI
To use this you need GCC version 4.0.0 or later.
config OABI_COMPAT
bool "Allow old ABI binaries to run with this kernel"
depends on AEABI
bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
depends on AEABI && EXPERIMENTAL
default y
help
This option preserves the old syscall interface along with the

2
arch/arm/configs/enp2611_defconfig
View File

@ -171,7 +171,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#

2
arch/arm/configs/ixdp2400_defconfig
View File

@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#

2
arch/arm/configs/ixdp2401_defconfig
View File

@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#

2
arch/arm/configs/ixdp2801_defconfig
View File

@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware ixdp2x01_clock=50000000"
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#

51
arch/arm/configs/s3c2410_defconfig
View File

@ -1,11 +1,10 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc1
# Sun Nov 13 17:41:24 2005
# Linux kernel version: 2.6.16-rc2
# Mon Feb 6 11:17:23 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@ -28,27 +27,31 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@ -102,6 +105,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_AT91RM9200 is not set
#
# S3C24XX Implementations
@ -160,7 +164,6 @@ CONFIG_CPU_TLB_V4WBI=y
# Bus support
#
CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@ -172,6 +175,7 @@ CONFIG_ISA_DMA_API=y
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@ -214,6 +218,8 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM=y
#
@ -259,6 +265,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@ -276,7 +287,6 @@ CONFIG_TCP_CONG_BIC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@ -299,6 +309,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
@ -412,8 +427,6 @@ CONFIG_PARPORT_1284=y
#
# Block devices
#
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
@ -502,7 +515,6 @@ CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
@ -607,11 +619,11 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
@ -625,6 +637,7 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@ -687,6 +700,7 @@ CONFIG_S3C2410_RTC=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
@ -730,6 +744,12 @@ CONFIG_SENSORS_EEPROM=m
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Hardware Monitoring support
#
@ -863,6 +883,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
@ -897,6 +918,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@ -965,6 +987,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@ -1020,12 +1043,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
@ -1034,6 +1058,7 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set

8
arch/arm/kernel/calls.S
View File

@ -291,21 +291,21 @@
CALL(sys_mq_getsetattr)
/* 280 */ CALL(sys_waitid)
CALL(sys_socket)
CALL(sys_bind)
CALL(sys_connect)
CALL(ABI(sys_bind, sys_oabi_bind))
CALL(ABI(sys_connect, sys_oabi_connect))
CALL(sys_listen)
/* 285 */ CALL(sys_accept)
CALL(sys_getsockname)
CALL(sys_getpeername)
CALL(sys_socketpair)
CALL(sys_send)
/* 290 */ CALL(sys_sendto)
/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto))
CALL(sys_recv)
CALL(sys_recvfrom)
CALL(sys_shutdown)
CALL(sys_setsockopt)
/* 295 */ CALL(sys_getsockopt)
CALL(sys_sendmsg)
CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
CALL(sys_recvmsg)
CALL(ABI(sys_semop, sys_oabi_semop))
CALL(sys_semget)

17
arch/arm/kernel/entry-armv.S
View File

@ -333,9 +333,13 @@ __pabt_svc:
@ from the exception stack
#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
#ifndef CONFIG_MMU
#warning "NPTL on non MMU needs fixing"
#else
@ make sure our user space atomic helper is aborted
cmp r2, #TASK_SIZE
bichs r3, r3, #PSR_Z_BIT
#endif
#endif
@
@ -705,7 +709,12 @@ __kuser_memory_barrier: @ 0xffff0fa0
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
* Note: this routine already includes memory barriers as needed.
* Notes:
*
* - This routine already includes memory barriers as needed.
*
* - A failure might be transient, i.e. it is possible, although unlikely,
* that "failure" be returned even if *ptr == oldval.
*
* For example, a user space atomic_add implementation could look like this:
*
@ -756,12 +765,18 @@ __kuser_cmpxchg: @ 0xffff0fc0
* exception happening just after the str instruction which would
* clear the Z flag although the exchange was done.
*/
#ifdef CONFIG_MMU
teq ip, ip @ set Z flag
ldr ip, [r2] @ load current val
add r3, r2, #1 @ prepare store ptr
teqeq ip, r0 @ compare with oldval if still allowed
streq r1, [r3, #-1]! @ store newval if still allowed
subs r0, r2, r3 @ if r2 == r3 the str occured
#else
#warning "NPTL on non MMU needs fixing"
mov r0, #-1
adds r0, r0, #0
#endif
mov pc, lr
#else

71
arch/arm/kernel/sys_oabi-compat.c
View File

@ -59,6 +59,16 @@
* struct sembuf loses its padding with EABI. Since arrays of them are
* used they have to be copyed to remove the padding. Compatibility wrappers
* provided below.
*
* sys_bind:
* sys_connect:
* sys_sendmsg:
* sys_sendto:
*
* struct sockaddr_un loses its padding with EABI. Since the size of the
* structure is used as a validation test in unix_mkname(), we need to
* change the length argument to 110 whenever it is 112. Compatibility
* wrappers provided below.
*/
#include <linux/syscalls.h>
@ -67,6 +77,7 @@
#include <linux/fcntl.h>
#include <linux/eventpoll.h>
#include <linux/sem.h>
#include <linux/socket.h>
#include <asm/ipc.h>
#include <asm/uaccess.h>
@ -337,3 +348,63 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
return sys_ipc(call, first, second, third, ptr, fifth);
}
}
asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
{
sa_family_t sa_family;
if (addrlen == 112 &&
get_user(sa_family, &addr->sa_family) == 0 &&
sa_family == AF_UNIX)
addrlen = 110;
return sys_bind(fd, addr, addrlen);
}
asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen)
{
sa_family_t sa_family;
if (addrlen == 112 &&
get_user(sa_family, &addr->sa_family) == 0 &&
sa_family == AF_UNIX)
addrlen = 110;
return sys_connect(fd, addr, addrlen);
}
asmlinkage long sys_oabi_sendto(int fd, void __user *buff,
size_t len, unsigned flags,
struct sockaddr __user *addr,
int addrlen)
{
sa_family_t sa_family;
if (addrlen == 112 &&
get_user(sa_family, &addr->sa_family) == 0 &&
sa_family == AF_UNIX)
addrlen = 110;
return sys_sendto(fd, buff, len, flags, addr, addrlen);
}
asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
{
struct sockaddr __user *addr;
int msg_namelen;
sa_family_t sa_family;
if (msg &&
get_user(msg_namelen, &msg->msg_namelen) == 0 &&
msg_namelen == 112 &&
get_user(addr, &msg->msg_name) == 0 &&
get_user(sa_family, &addr->sa_family) == 0 &&
sa_family == AF_UNIX)
{
/*
* HACK ALERT: there is a limit to how much backward bending
* we should do for what is actually a transitional
* compatibility layer. This already has known flaws with
* a few ioctls that we don't intend to fix. Therefore
* consider this blatent hack as another one... and take care
* to run for cover. In most cases it will "just work fine".
* If it doesn't, well, tough.
*/
put_user(110, &msg->msg_namelen);
}
return sys_sendmsg(fd, msg, flags);
}

2
arch/arm/mach-clps711x/Kconfig
View File

@ -24,6 +24,8 @@ config ARCH_CEIVA
config ARCH_CLEP7312
bool "CLEP7312"
help
Boards based on the Cirrus Logic 7212/7312 chips.
config ARCH_EDB7211
bool "EDB7211"

1
arch/arm/mach-imx/mx1ads.c
View File

@ -27,7 +27,6 @@
#include <asm/mach/arch.h>
#include <linux/interrupt.h>
#include "generic.h"
#include <asm/serial.h>
static struct resource cs89x0_resources[] = {
[0] = {

1
arch/arm/mach-ixp2000/enp2611.c
View File

@ -106,6 +106,7 @@ static void __init enp2611_pci_preinit(void)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
pcibios_setup("firmware");
}
static inline int enp2611_pci_valid_device(struct pci_bus *bus,

1
arch/arm/mach-ixp2000/ixdp2400.c
View File

@ -68,6 +68,7 @@ void __init ixdp2400_pci_preinit(void)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
pcibios_setup("firmware");
}
int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)

5
arch/arm/mach-ixp2000/ixdp2x01.c
View File

@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
ixp2000_pci_preinit();
pcibios_setup("firmware");
}
#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
@ -299,7 +300,9 @@ struct hw_pci ixdp2x01_pci __initdata = {
int __init ixdp2x01_pci_init(void)
{
pci_common_init(&ixdp2x01_pci);
if (machine_is_ixdp2401() || machine_is_ixdp2801())
pci_common_init(&ixdp2x01_pci);
return 0;
}

3
arch/arm/mach-omap1/board-generic.c
View File

@ -30,6 +30,7 @@
static void __init omap_generic_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
}
@ -104,7 +105,7 @@ static void __init omap_generic_init(void)
static void __init omap_generic_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")

3
arch/arm/mach-omap1/board-h2.c
View File

@ -128,6 +128,7 @@ static void __init h2_init_smc91x(void)
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h2_init_smc91x();
@ -194,7 +195,7 @@ static void __init h2_init(void)
static void __init h2_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
MACHINE_START(OMAP_H2, "TI-H2")

3
arch/arm/mach-omap1/board-h3.c
View File

@ -203,6 +203,7 @@ static void __init h3_init_smc91x(void)
void h3_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h3_init_smc91x();
@ -210,7 +211,7 @@ void h3_init_irq(void)
static void __init h3_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")

3
arch/arm/mach-omap1/board-innovator.c
View File

@ -181,6 +181,7 @@ static void __init innovator_init_smc91x(void)
void innovator_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP15XX
@ -285,7 +286,7 @@ static void __init innovator_init(void)
static void __init innovator_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {

3
arch/arm/mach-omap1/board-netstar.c
View File

@ -65,6 +65,7 @@ static struct omap_board_config_kernel netstar_config[] = {
static void __init netstar_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
@ -108,7 +109,7 @@ static void __init netstar_init(void)
static void __init netstar_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
#define MACHINE_PANICED 1

3
arch/arm/mach-omap1/board-osk.c
View File

@ -169,6 +169,7 @@ static void __init osk_init_cf(void)
static void __init osk_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
osk_init_smc91x();
@ -269,7 +270,7 @@ static void __init osk_init(void)
static void __init osk_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
MACHINE_START(OMAP_OSK, "TI-OSK")

3
arch/arm/mach-omap1/board-palmte.c
View File

@ -34,6 +34,7 @@
static void __init omap_generic_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
}
@ -72,7 +73,7 @@ static void __init omap_generic_init(void)
static void __init omap_generic_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")

3
arch/arm/mach-omap1/board-perseus2.c
View File

@ -144,6 +144,7 @@ static void __init perseus2_init_smc91x(void)
void omap_perseus2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
perseus2_init_smc91x();
@ -160,7 +161,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
static void __init omap_perseus2_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));

3
arch/arm/mach-omap1/board-voiceblue.c
View File

@ -162,6 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
static void __init voiceblue_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
@ -206,7 +207,7 @@ static void __init voiceblue_init(void)
static void __init voiceblue_map_io(void)
{
omap_map_common_io();
omap1_map_common_io();
}
#define MACHINE_PANICED 1

44
arch/arm/mach-omap1/io.c
View File

@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
@ -83,15 +84,24 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
};
#endif
static int initialized = 0;
static void __init _omap_map_io(void)
/*
* Maps common IO regions for omap1. This should only get called from
* board specific init.
*/
void __init omap1_map_common_io(void)
{
initialized = 1;
/* We have to initialize the IO space mapping before we can run
* cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
*/
local_flush_tlb_all();
flush_cache_all();
/* We want to check CPU revision early for cpu_is_omapxxxx() macros.
* IO space mapping must be initialized before we can do that.
*/
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
@ -111,7 +121,14 @@ static void __init _omap_map_io(void)
#endif
omap_sram_init();
}
/*
* Common low-level hardware init for omap1. This should only get called from
* board specific init.
*/
void __init omap1_init_common_hw()
{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
@ -121,16 +138,7 @@ static void __init _omap_map_io(void)
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
}
/*
* This should only get called from board specific init
*/
void __init omap_map_common_io(void)
{
if (!initialized) {
_omap_map_io();
omap1_mux_init();
}
omap1_mux_init();
}

3
arch/arm/mach-omap2/board-generic.c
View File

@ -33,6 +33,7 @@
static void __init omap_generic_init_irq(void)
{
omap2_init_common_hw();
omap_init_irq();
}
@ -64,7 +65,7 @@ static void __init omap_generic_init(void)
static void __init omap_generic_map_io(void)
{
omap_map_common_io();
omap2_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")

3
arch/arm/mach-omap2/board-h4.c
View File

@ -136,6 +136,7 @@ static inline void __init h4_init_smc91x(void)
static void __init omap_h4_init_irq(void)
{
omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
h4_init_smc91x();
@ -181,7 +182,7 @@ static void __init omap_h4_init(void)
static void __init omap_h4_map_io(void)
{
omap_map_common_io();
omap2_map_common_io();
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")

2
arch/arm/mach-realview/core.c
View File

@ -182,7 +182,7 @@ static const struct icst307_params realview_oscvco_params = {
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;

43
arch/arm/mach-s3c2410/clock.c
View File

@ -40,7 +40,6 @@
#include <linux/mutex.h>
#include <asm/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
@ -59,22 +58,18 @@ static DEFINE_MUTEX(clocks_mutex);
void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable)
{
unsigned long clkcon;
unsigned long flags;
local_irq_save(flags);
clkcon = __raw_readl(S3C2410_CLKCON);
clkcon &= ~clocks;
if (enable)
clkcon |= clocks;
else
clkcon &= ~clocks;
/* ensure none of the special function bits set */
clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
__raw_writel(clkcon, S3C2410_CLKCON);
local_irq_restore(flags);
}
/* enable and disable calls for use with the clk struct */
@ -138,16 +133,32 @@ void clk_put(struct clk *clk)
int clk_enable(struct clk *clk)
{
if (IS_ERR(clk))
if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
return (clk->enable)(clk, 1);
clk_enable(clk->parent);
mutex_lock(&clocks_mutex);
if ((clk->usage++) == 0)
(clk->enable)(clk, 1);
mutex_unlock(&clocks_mutex);
return 0;
}
void clk_disable(struct clk *clk)
{
if (!IS_ERR(clk))
if (IS_ERR(clk) || clk == NULL)
return;
mutex_lock(&clocks_mutex);
if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
mutex_unlock(&clocks_mutex);
clk_disable(clk->parent);
}
@ -361,6 +372,14 @@ int s3c24xx_register_clock(struct clk *clk)
if (clk->enable == NULL)
clk->enable = clk_null_enable;
/* if this is a standard clock, set the usage state */
if (clk->ctrlbit) {
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
}
/* add to the list of available clocks */
mutex_lock(&clocks_mutex);
@ -402,6 +421,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
* the LCD clock if it is not needed.
*/
mutex_lock(&clocks_mutex);
s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0);
@ -409,6 +430,8 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0);
s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0);
mutex_unlock(&clocks_mutex);
/* assume uart clocks are correctly setup */
/* register our clocks */

1
arch/arm/mach-s3c2410/clock.h
View File

@ -16,6 +16,7 @@ struct clk {
struct clk *parent;
const char *name;
int id;
int usage;
unsigned long rate;
unsigned long ctrlbit;
int (*enable)(struct clk *, int enable);

5
arch/arm/mach-s3c2410/devs.c
View File

@ -275,6 +275,11 @@ static struct resource s3c_adc_resource[] = {
},
[1] = {
.start = IRQ_TC,
.end = IRQ_TC,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_ADC,
.end = IRQ_ADC,
.flags = IORESOURCE_IRQ,
}

9
arch/arm/plat-omap/sram.c
View File

@ -17,6 +17,7 @@
#include <linux/init.h>
#include <asm/mach/map.h>
#include <asm/tlb.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
@ -95,6 +96,14 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual,
omap_sram_io_desc[0].length);
/*
* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but since we're called from map_io(), we
* must do it here.
*/
local_flush_tlb_all();
flush_cache_all();
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...

2
arch/cris/Makefile
View File

@ -119,7 +119,7 @@ $(SRC_ARCH)/.links:
@ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
@ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
@ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
@ln -sfn $(SRC_ARCH)/$(SARCH)/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
@ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
@touch $@
# Create link to sub arch includes

8
arch/cris/arch-v10/kernel/ptrace.c
View File

@ -202,18 +202,18 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
int i;
unsigned long tmp;
ret = 0;
for (i = 0; i <= PT_MAX; i++) {
tmp = get_reg(child, i);
if (put_user(tmp, datap)) {
ret = -EFAULT;
goto out_tsk;
break;
}
data += sizeof(long);
}
ret = 0;
break;
}
@ -222,10 +222,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
int i;
unsigned long tmp;
ret = 0;
for (i = 0; i <= PT_MAX; i++) {
if (get_user(tmp, datap)) {
ret = -EFAULT;
goto out_tsk;
break;
}
if (i == PT_DCCR) {
@ -237,7 +238,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
data += sizeof(long);
}
ret = 0;
break;
}

1
arch/cris/kernel/setup.c
View File

@ -24,7 +24,6 @@
/*
* Setup options
*/
struct drive_info_struct { char dummy[32]; } drive_info;
struct screen_info screen_info;
extern int root_mountflags;

2
arch/i386/kernel/apic.c
View File

@ -77,7 +77,7 @@ void ack_bad_irq(unsigned int irq)
* completely.
* But only ack when the APIC is enabled -AK
*/
if (!cpu_has_apic)
if (cpu_has_apic)
ack_APIC_irq();
}

1
arch/i386/kernel/syscall_table.S
View File

@ -309,3 +309,4 @@ ENTRY(sys_call_table)
.long sys_faccessat
.long sys_pselect6
.long sys_ppoll
.long sys_unshare /* 310 */

4
arch/ia64/Kconfig
View File

@ -194,7 +194,6 @@ config IA64_L1_CACHE_SHIFT
default "7" if MCKINLEY
default "6" if ITANIUM
# align cache-sensitive data to 64 bytes
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
@ -374,6 +373,9 @@ config IA64_PALINFO
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
config SGI_SN
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"

10
arch/ia64/dig/setup.c
View File

@ -25,16 +25,6 @@
#include <asm/machvec.h>
#include <asm/system.h>
/*
* This is here so we can use the CMOS detection in ide-probe.c to
* determine what drives are present. In theory, we don't need this
* as the auto-detection could be done via ide-probe.c:do_probe() but
* in practice that would be much slower, which is painful when
* running in the simulator. Note that passing zeroes in DRIVE_INFO
* is sufficient (the IDE driver will autodetect the drive geometry).
*/
char drive_info[4*16];
void __init
dig_setup (char **cmdline_p)
{

1
arch/ia64/ia32/ia32_signal.c
View File

@ -515,6 +515,7 @@ sys32_signal (int sig, unsigned int handler)
sigact_set_handler(&new_sa, handler, 0);
new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
sigemptyset(&new_sa.sa.sa_mask);
ret = do_sigaction(sig, &new_sa, &old_sa);

16
arch/ia64/kernel/efi.c
View File

@ -410,24 +410,16 @@ efi_init (void)
efi_config_table_t *config_tables;
efi_char16_t *c16;
u64 efi_desc_size;
char *cp, *end, vendor[100] = "unknown";
char *cp, vendor[100] = "unknown";
extern char saved_command_line[];
int i;
/* it's too early to be able to use the standard kernel command line support... */
for (cp = saved_command_line; *cp; ) {
if (memcmp(cp, "mem=", 4) == 0) {
cp += 4;
mem_limit = memparse(cp, &end);
if (end != cp)
break;
cp = end;
mem_limit = memparse(cp + 4, &cp);
} else if (memcmp(cp, "max_addr=", 9) == 0) {
cp += 9;
max_addr = GRANULEROUNDDOWN(memparse(cp, &end));
if (end != cp)
break;
cp = end;
max_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
} else {
while (*cp != ' ' && *cp)
++cp;
@ -458,7 +450,7 @@ efi_init (void)
/* Show what we know for posterity */
c16 = __va(efi.systab->fw_vendor);
if (c16) {
for (i = 0;i < (int) sizeof(vendor) && *c16; ++i)
for (i = 0;i < (int) sizeof(vendor) - 1 && *c16; ++i)
vendor[i] = *c16++;
vendor[i] = '\0';
}

16
arch/ia64/kernel/entry.S
View File

@ -1601,5 +1601,21 @@ sys_call_table:
data8 sys_inotify_add_watch
data8 sys_inotify_rm_watch
data8 sys_migrate_pages // 1280
data8 sys_openat
data8 sys_mkdirat
data8 sys_mknodat
data8 sys_fchownat
data8 sys_futimesat // 1285
data8 sys_newfstatat
data8 sys_unlinkat
data8 sys_renameat
data8 sys_linkat
data8 sys_symlinkat // 1290
data8 sys_readlinkat
data8 sys_fchmodat
data8 sys_faccessat
data8 sys_ni_syscall // reserved for pselect
data8 sys_ni_syscall // 1295 reserved for ppoll
data8 sys_unshare
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls

29
arch/ia64/kernel/fsys.S
View File

@ -878,31 +878,8 @@ fsyscall_table:
data8 0 // timer_delete
data8 0 // clock_settime
data8 fsys_clock_gettime // clock_gettime
data8 0 // clock_getres // 1255
data8 0 // clock_nanosleep
data8 0 // fstatfs64
data8 0 // statfs64
data8 0
data8 0 // 1260
data8 0
data8 0 // mq_open
data8 0 // mq_unlink
data8 0 // mq_timedsend
data8 0 // mq_timedreceive // 1265
data8 0 // mq_notify
data8 0 // mq_getsetattr
data8 0 // kexec_load
data8 0
data8 0 // 1270
data8 0
data8 0
data8 0
data8 0
data8 0 // 1275
data8 0
data8 0
data8 0
data8 0
data8 0 // 1280
#define __NR_syscall_last 1255
.space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
.org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls

1
arch/ia64/kernel/head.S
View File

@ -352,6 +352,7 @@ start_ap:
mov ar.rsc=0 // place RSE in enforced lazy mode
;;
loadrs // clear the dirty partition
mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base
;;
mov ar.bspstore=r2 // establish the new RSE stack
;;

3
arch/ia64/kernel/mca_drv.c
View File

@ -437,6 +437,9 @@ recover_from_read_error(slidx_table_t *slidx,
* the process not have any locks of kernel.
*/
/* Is minstate valid? */
if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate))
return 0;
psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr);
/*

75
arch/ia64/kernel/sal.c
View File

@ -14,6 +14,7 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <asm/delay.h>
#include <asm/page.h>
#include <asm/sal.h>
#include <asm/pal.h>
@ -214,6 +215,78 @@ chk_nointroute_opt(void)
static void __init sal_desc_ap_wakeup(void *p) { }
#endif
/*
* HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
* cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as
* "in-service" and masks other interrupts of equal or lower priority.
*
* HP internal defect reports: F1859, F2775, F3031.
*/
static int sal_cache_flush_drops_interrupts;
static void __init
check_sal_cache_flush (void)
{
unsigned long flags, itv;
int cpu;
u64 vector;
cpu = get_cpu();
local_irq_save(flags);
/*
* Schedule a timer interrupt, wait until it's reported, and see if
* SAL_CACHE_FLUSH drops it.
*/
itv = ia64_get_itv();
BUG_ON((itv & (1 << 16)) == 0);
ia64_set_itv(IA64_TIMER_VECTOR);
ia64_set_itm(ia64_get_itc() + 1000);
while (!ia64_get_irr(IA64_TIMER_VECTOR))
cpu_relax();
ia64_sal_cache_flush(3);
if (ia64_get_irr(IA64_TIMER_VECTOR)) {
vector = ia64_get_ivr();
ia64_eoi();
WARN_ON(vector != IA64_TIMER_VECTOR);
} else {
sal_cache_flush_drops_interrupts = 1;
printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
"PAL_CACHE_FLUSH will be used instead\n");
ia64_eoi();
}
ia64_set_itv(itv);
local_irq_restore(flags);
put_cpu();
}
s64
ia64_sal_cache_flush (u64 cache_type)
{
struct ia64_sal_retval isrv;
if (sal_cache_flush_drops_interrupts) {
unsigned long flags;
u64 progress;
s64 rc;
progress = 0;
local_irq_save(flags);
rc = ia64_pal_cache_flush(cache_type,
PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
local_irq_restore(flags);
return rc;
}
SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
return isrv.status;
}
void __init
ia64_sal_init (struct ia64_sal_systab *systab)
{
@ -262,6 +335,8 @@ ia64_sal_init (struct ia64_sal_systab *systab)
}
p += SAL_DESC_SIZE(*p);
}
check_sal_cache_flush();
}
int

4
arch/ia64/kernel/setup.c
View File

@ -71,6 +71,8 @@ unsigned long __per_cpu_offset[NR_CPUS];
EXPORT_SYMBOL(__per_cpu_offset);
#endif
extern void ia64_setup_printk_clock(void);
DEFINE_PER_CPU(struct cpuinfo_ia64, cpu_info);
DEFINE_PER_CPU(unsigned long, local_per_cpu_offset);
DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8);
@ -445,6 +447,8 @@ setup_arch (char **cmdline_p)
/* process SAL system table: */
ia64_sal_init(efi.sal_systab);
ia64_setup_printk_clock();
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();

27
arch/ia64/kernel/time.c
View File

@ -278,3 +278,30 @@ udelay (unsigned long usecs)
}
}
EXPORT_SYMBOL(udelay);
static unsigned long long ia64_itc_printk_clock(void)
{
if (ia64_get_kr(IA64_KR_PER_CPU_DATA))
return sched_clock();
return 0;
}
static unsigned long long ia64_default_printk_clock(void)
{
return (unsigned long long)(jiffies_64 - INITIAL_JIFFIES) *
(1000000000/HZ);
}
unsigned long long (*ia64_printk_clock)(void) = &ia64_default_printk_clock;
unsigned long long printk_clock(void)
{
return ia64_printk_clock();
}
void __init
ia64_setup_printk_clock(void)
{
if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT))
ia64_printk_clock = ia64_itc_printk_clock;
}

2
arch/ia64/sn/Makefile
View File

@ -9,6 +9,4 @@
# Makefile for the sn ia64 subplatform
#
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y += kernel/ pci/

2
arch/ia64/sn/kernel/Makefile
View File

@ -7,6 +7,8 @@
# Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All Rights Reserved.
#
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
huberror.o io_init.o iomv.o klconflib.o sn2/
obj-$(CONFIG_IA64_GENERIC) += machvec.o

17
arch/ia64/sn/kernel/bte.c
View File

@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/config.h>
@ -186,18 +186,13 @@ retry_bteop:
/* Initialize the notification to a known value. */
*bte->most_rcnt_na = BTE_WORD_BUSY;
notif_phys_addr = TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na));
notif_phys_addr = (u64)bte->most_rcnt_na;
if (is_shub2()) {
src = SH2_TIO_PHYS_TO_DMA(src);
dest = SH2_TIO_PHYS_TO_DMA(dest);
notif_phys_addr = SH2_TIO_PHYS_TO_DMA(notif_phys_addr);
}
/* Set the source and destination registers */
BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src))));
BTE_SRC_STORE(bte, TO_PHYS(src));
BTE_PRINTKV(("IBDA = 0x%lx)\n", (TO_PHYS(dest))));
BTE_DEST_STORE(bte, TO_PHYS(dest));
BTE_PRINTKV(("IBSA = 0x%lx)\n", src));
BTE_SRC_STORE(bte, src);
BTE_PRINTKV(("IBDA = 0x%lx)\n", dest));
BTE_DEST_STORE(bte, dest);
/* Set the notification register */
BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr));

17
arch/ia64/sn/kernel/io_init.c
View File

@ -208,7 +208,7 @@ static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
* sn_fixup_ionodes() - This routine initializes the HUB data strcuture for
* each node in the system.
*/
static void sn_fixup_ionodes(void)
static void __init sn_fixup_ionodes(void)
{
struct sn_flush_device_kernel *sn_flush_device_kernel;
struct sn_flush_device_kernel *dev_entry;
@ -467,6 +467,13 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
pcidev_info->pdi_sn_irq_info = NULL;
kfree(sn_irq_info);
}
/*
* MSI currently not supported on altix. Remove this when
* the MSI abstraction patches are integrated into the kernel
* (sometime after 2.6.16 releases)
*/
dev->no_msi = 1;
}
/*
@ -610,15 +617,15 @@ void sn_bus_store_sysdata(struct pci_dev *dev)
void sn_bus_free_sysdata(void)
{
struct sysdata_el *element;
struct list_head *list;
struct list_head *list, *safe;
sn_sysdata_free_start:
list_for_each(list, &sn_sysdata_list) {
list_for_each_safe(list, safe, &sn_sysdata_list) {
element = list_entry(list, struct sysdata_el, entry);
list_del(&element->entry);
list_del(&(((struct pcidev_info *)
(element->sysdata))->pdi_list));
kfree(element->sysdata);
kfree(element);
goto sn_sysdata_free_start;
}
return;
}

25
arch/ia64/sn/kernel/irq.c
View File

@ -5,11 +5,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
#include <asm/sn/intr.h>
@ -76,17 +77,15 @@ static void sn_enable_irq(unsigned int irq)
static void sn_ack_irq(unsigned int irq)
{
u64 event_occurred, mask = 0;
u64 event_occurred, mask;
irq = irq & 0xff;
event_occurred =
HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
mask = event_occurred & SH_ALL_INT_MASK;
HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
mask);
HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS), mask);
__set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
move_irq(irq);
move_native_irq(irq);
}
static void sn_end_irq(unsigned int irq)
@ -219,9 +218,8 @@ static void register_intr_pda(struct sn_irq_info *sn_irq_info)
pdacpu(cpu)->sn_last_irq = irq;
}
if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq) {
if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq)
pdacpu(cpu)->sn_first_irq = irq;
}
}
static void unregister_intr_pda(struct sn_irq_info *sn_irq_info)
@ -289,7 +287,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
list_add_rcu(&sn_irq_info->list, sn_irq_lh[sn_irq_info->irq_irq]);
spin_unlock(&sn_irq_info_lock);
(void)register_intr_pda(sn_irq_info);
register_intr_pda(sn_irq_info);
}
void sn_irq_unfixup(struct pci_dev *pci_dev)
@ -301,7 +299,9 @@ void sn_irq_unfixup(struct pci_dev *pci_dev)
return;
sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info;
if (!sn_irq_info || !sn_irq_info->irq_irq) {
if (!sn_irq_info)
return;
if (!sn_irq_info->irq_irq) {
kfree(sn_irq_info);
return;
}
@ -419,7 +419,7 @@ void sn_lb_int_war_check(void)
rcu_read_unlock();
}
void sn_irq_lh_init(void)
void __init sn_irq_lh_init(void)
{
int i;
@ -434,5 +434,4 @@ void sn_irq_lh_init(void)
INIT_LIST_HEAD(sn_irq_lh[i]);
}
}

29
arch/ia64/sn/kernel/klconflib.c
View File

@ -78,31 +78,30 @@ format_module_id(char *buffer, moduleid_t m, int fmt)
position = MODULE_GET_BPOS(m);
if ((fmt == MODULE_FORMAT_BRIEF) || (fmt == MODULE_FORMAT_LCD)) {
/* Brief module number format, eg. 002c15 */
/* Brief module number format, eg. 002c15 */
/* Decompress the rack number */
*buffer++ = '0' + RACK_GET_CLASS(rack);
*buffer++ = '0' + RACK_GET_GROUP(rack);
*buffer++ = '0' + RACK_GET_NUM(rack);
/* Decompress the rack number */
*buffer++ = '0' + RACK_GET_CLASS(rack);
*buffer++ = '0' + RACK_GET_GROUP(rack);
*buffer++ = '0' + RACK_GET_NUM(rack);
/* Add the brick type */
*buffer++ = brickchar;
/* Add the brick type */
*buffer++ = brickchar;
}
else if (fmt == MODULE_FORMAT_LONG) {
/* Fuller hwgraph format, eg. rack/002/bay/15 */
/* Fuller hwgraph format, eg. rack/002/bay/15 */
strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
*buffer++ = '0' + RACK_GET_CLASS(rack);
*buffer++ = '0' + RACK_GET_GROUP(rack);
*buffer++ = '0' + RACK_GET_NUM(rack);
*buffer++ = '0' + RACK_GET_CLASS(rack);
*buffer++ = '0' + RACK_GET_GROUP(rack);
*buffer++ = '0' + RACK_GET_NUM(rack);
strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
}
/* Add the bay position, using at least two digits */
if (position < 10)
*buffer++ = '0';
*buffer++ = '0';
sprintf(buffer, "%d", position);
}

5
arch/ia64/sn/kernel/mca.c
View File

@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/types.h>
@ -137,7 +137,8 @@ int sn_salinfo_platform_oemdata(const u8 *sect_header, u8 **oemdata, u64 *oemdat
static int __init sn_salinfo_init(void)
{
salinfo_platform_oemdata = &sn_salinfo_platform_oemdata;
if (ia64_platform_is("sn2"))
salinfo_platform_oemdata = &sn_salinfo_platform_oemdata;
return 0;
}

73
arch/ia64/sn/kernel/setup.c
View File

@ -67,6 +67,7 @@ extern unsigned long last_time_offset;
extern void (*ia64_mark_idle) (int);
extern void snidle(int);
extern unsigned char acpi_kbd_controller_present;
extern unsigned long long (*ia64_printk_clock)(void);
unsigned long sn_rtc_cycles_per_second;
EXPORT_SYMBOL(sn_rtc_cycles_per_second);
@ -124,20 +125,6 @@ struct screen_info sn_screen_info = {
.orig_video_points = 16
};
/*
* This is here so we can use the CMOS detection in ide-probe.c to
* determine what drives are present. In theory, we don't need this
* as the auto-detection could be done via ide-probe.c:do_probe() but
* in practice that would be much slower, which is painful when
* running in the simulator. Note that passing zeroes in DRIVE_INFO
* is sufficient (the IDE driver will autodetect the drive geometry).
*/
#ifdef CONFIG_IA64_GENERIC
extern char drive_info[4 * 16];
#else
char drive_info[4 * 16];
#endif
/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
@ -209,7 +196,7 @@ void __init early_sn_setup(void)
}
extern int platform_intr_list[];
static int __initdata shub_1_1_found = 0;
static int __initdata shub_1_1_found;
/*
* sn_check_for_wars
@ -372,6 +359,16 @@ sn_scan_pcdp(void)
}
}
static unsigned long sn2_rtc_initial;
static unsigned long long ia64_sn2_printk_clock(void)
{
unsigned long rtc_now = rtc_time();
return (rtc_now - sn2_rtc_initial) *
(1000000000 / sn_rtc_cycles_per_second);
}
/**
* sn_setup - SN platform setup routine
* @cmdline_p: kernel command line
@ -386,6 +383,7 @@ void __init sn_setup(char **cmdline_p)
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
sn2_rtc_initial = rtc_time();
ia64_sn_plat_set_error_handling_features(); // obsolete
ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV);
ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES);
@ -437,19 +435,6 @@ void __init sn_setup(char **cmdline_p)
*/
build_cnode_tables();
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
* support here so we don't have to listen to failed keyboard probe
* messages.
*/
if (version <= 0x0209 && acpi_kbd_controller_present) {
printk(KERN_INFO "Disabling legacy keyboard support as prom "
"is too old and doesn't provide FADT\n");
acpi_kbd_controller_present = 0;
}
printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
@ -463,6 +448,21 @@ void __init sn_setup(char **cmdline_p)
platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
ia64_printk_clock = ia64_sn2_printk_clock;
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
* support here so we don't have to listen to failed keyboard probe
* messages.
*/
if (version <= 0x0209 && acpi_kbd_controller_present) {
printk(KERN_INFO "Disabling legacy keyboard support as prom "
"is too old and doesn't provide FADT\n");
acpi_kbd_controller_present = 0;
}
printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
/*
* we set the default root device to /dev/hda
* to make simulation easy
@ -578,13 +578,17 @@ void __init sn_cpu_init(void)
sn_prom_type = 2;
else
sn_prom_type = 1;
printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
printk(KERN_INFO "Running on medusa with %s PROM\n",
(sn_prom_type == 1) ? "real" : "fake");
}
memset(pda, 0, sizeof(pda));
if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
&sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
&sn_coherency_id, &sn_region_size))
if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2,
&sn_hub_info->nasid_bitmask,
&sn_hub_info->nasid_shift,
&sn_system_size, &sn_sharing_domain_size,
&sn_partition_id, &sn_coherency_id,
&sn_region_size))
BUG();
sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
@ -716,7 +720,8 @@ void __init build_cnode_tables(void)
for_each_online_node(node) {
kl_config_hdr_t *klgraph_header;
nasid = cnodeid_to_nasid(node);
if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
klgraph_header = ia64_sn_get_klconfig_addr(nasid);
if (klgraph_header == NULL)
BUG();
brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
@ -734,7 +739,7 @@ nasid_slice_to_cpuid(int nasid, int slice)
{
long cpu;
for (cpu=0; cpu < NR_CPUS; cpu++)
for (cpu = 0; cpu < NR_CPUS; cpu++)
if (cpuid_to_nasid(cpu) == nasid &&
cpuid_to_slice(cpu) == slice)
return cpu;

2
arch/ia64/sn/kernel/sn2/Makefile
View File

@ -9,5 +9,7 @@
# sn2 specific kernel files
#
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y += cache.o io.o ptc_deadlock.o sn2_smp.o sn_proc_fs.o \
prominfo_proc.o timer.o timer_interrupt.o sn_hwperf.o

196
arch/ia64/sn/kernel/sn2/sn2_smp.c
View File

@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
* Copyright (C) 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/init.h>
@ -46,104 +46,28 @@ DECLARE_PER_CPU(struct ptc_stats, ptcstats);
static __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
void sn2_ptc_deadlock_recovery(short *, short, int, volatile unsigned long *, unsigned long data0,
volatile unsigned long *, unsigned long data1);
void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned long *, unsigned long,
volatile unsigned long *, unsigned long);
#ifdef DEBUG_PTC
/*
* ptctest:
*
* xyz - 3 digit hex number:
* x - Force PTC purges to use shub:
* 0 - no force
* 1 - force
* y - interupt enable
* 0 - disable interrupts
* 1 - leave interuupts enabled
* z - type of lock:
* 0 - global lock
* 1 - node local lock
* 2 - no lock
*
* Note: on shub1, only ptctest == 0 is supported. Don't try other values!
* Note: some is the following is captured here to make degugging easier
* (the macros make more sense if you see the debug patch - not posted)
*/
static unsigned int sn2_ptctest = 0;
static int __init ptc_test(char *str)
{
get_option(&str, &sn2_ptctest);
return 1;
}
__setup("ptctest=", ptc_test);
static inline int ptc_lock(unsigned long *flagp)
{
unsigned long opt = sn2_ptctest & 255;
switch (opt) {
case 0x00:
spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
break;
case 0x01:
spin_lock_irqsave(&sn_nodepda->ptc_lock, *flagp);
break;
case 0x02:
local_irq_save(*flagp);
break;
case 0x10:
spin_lock(&sn2_global_ptc_lock);
break;
case 0x11:
spin_lock(&sn_nodepda->ptc_lock);
break;
case 0x12:
break;
default:
BUG();
}
return opt;
}
static inline void ptc_unlock(unsigned long flags, int opt)
{
switch (opt) {
case 0x00:
spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
break;
case 0x01:
spin_unlock_irqrestore(&sn_nodepda->ptc_lock, flags);
break;
case 0x02:
local_irq_restore(flags);
break;
case 0x10:
spin_unlock(&sn2_global_ptc_lock);
break;
case 0x11:
spin_unlock(&sn_nodepda->ptc_lock);
break;
case 0x12:
break;
default:
BUG();
}
}
#else
#define sn2_ptctest 0
#define local_node_uses_ptc_ga(sh1) ((sh1) ? 1 : 0)
#define max_active_pio(sh1) ((sh1) ? 32 : 7)
#define reset_max_active_on_deadlock() 1
#define PTC_LOCK(sh1) ((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock)
static inline int ptc_lock(unsigned long *flagp)
static inline void ptc_lock(int sh1, unsigned long *flagp)
{
spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
return 0;
spin_lock_irqsave(PTC_LOCK(sh1), *flagp);
}
static inline void ptc_unlock(unsigned long flags, int opt)
static inline void ptc_unlock(int sh1, unsigned long flags)
{
spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
spin_unlock_irqrestore(PTC_LOCK(sh1), flags);
}
#endif
struct ptc_stats {
unsigned long ptc_l;
@ -151,27 +75,30 @@ struct ptc_stats {
unsigned long shub_ptc_flushes;
unsigned long nodes_flushed;
unsigned long deadlocks;
unsigned long deadlocks2;
unsigned long lock_itc_clocks;
unsigned long shub_itc_clocks;
unsigned long shub_itc_clocks_max;
unsigned long shub_ptc_flushes_not_my_mm;
};
static inline unsigned long wait_piowc(void)
{
volatile unsigned long *piows, zeroval;
unsigned long ws;
volatile unsigned long *piows;
unsigned long zeroval, ws;
piows = pda->pio_write_status_addr;
zeroval = pda->pio_write_status_val;
do {
cpu_relax();
} while (((ws = *piows) & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) != zeroval);
return ws;
return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0;
}
void sn_tlb_migrate_finish(struct mm_struct *mm)
{
if (mm == current->mm)
/* flush_tlb_mm is inefficient if more than 1 users of mm */
if (mm == current->mm && mm && atomic_read(&mm->mm_users) == 1)
flush_tlb_mm(mm);
}
@ -201,12 +128,14 @@ void
sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long nbits)
{
int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
int mymm = (mm == current->active_mm && current->mm);
int i, ibegin, shub1, cnode, mynasid, cpu, lcpu = 0, nasid;
int mymm = (mm == current->active_mm && mm == current->mm);
int use_cpu_ptcga;
volatile unsigned long *ptc0, *ptc1;
unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value, old_rr = 0;
short nasids[MAX_NUMNODES], nix;
nodemask_t nodes_flushed;
int active, max_active, deadlock;
nodes_clear(nodes_flushed);
i = 0;
@ -267,41 +196,56 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
mynasid = get_nasid();
use_cpu_ptcga = local_node_uses_ptc_ga(shub1);
max_active = max_active_pio(shub1);
itc = ia64_get_itc();
opt = ptc_lock(&flags);
ptc_lock(shub1, &flags);
itc2 = ia64_get_itc();
__get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc;
__get_cpu_var(ptcstats).shub_ptc_flushes++;
__get_cpu_var(ptcstats).nodes_flushed += nix;
if (!mymm)
__get_cpu_var(ptcstats).shub_ptc_flushes_not_my_mm++;
if (use_cpu_ptcga && !mymm) {
old_rr = ia64_get_rr(start);
ia64_set_rr(start, (old_rr & 0xff) | (rr_value << 8));
ia64_srlz_d();
}
wait_piowc();
do {
if (shub1)
data1 = start | (1UL << SH1_PTC_1_START_SHFT);
else
data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
for (i = 0; i < nix; i++) {
deadlock = 0;
active = 0;
for (ibegin = 0, i = 0; i < nix; i++) {
nasid = nasids[i];
if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
if (use_cpu_ptcga && unlikely(nasid == mynasid)) {
ia64_ptcga(start, nbits << 2);
ia64_srlz_i();
} else {
ptc0 = CHANGE_NASID(nasid, ptc0);
if (ptc1)
ptc1 = CHANGE_NASID(nasid, ptc1);
pio_atomic_phys_write_mmrs(ptc0, data0, ptc1,
data1);
flushed = 1;
pio_atomic_phys_write_mmrs(ptc0, data0, ptc1, data1);
active++;
}
if (active >= max_active || i == (nix - 1)) {
if ((deadlock = wait_piowc())) {
sn2_ptc_deadlock_recovery(nasids, ibegin, i, mynasid, ptc0, data0, ptc1, data1);
if (reset_max_active_on_deadlock())
max_active = 1;
}
active = 0;
ibegin = i + 1;
}
}
if (flushed
&& (wait_piowc() &
(SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK))) {
sn2_ptc_deadlock_recovery(nasids, nix, mynasid, ptc0, data0, ptc1, data1);
}
start += (1UL << nbits);
} while (start < end);
itc2 = ia64_get_itc() - itc2;
@ -309,7 +253,12 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
if (itc2 > __get_cpu_var(ptcstats).shub_itc_clocks_max)
__get_cpu_var(ptcstats).shub_itc_clocks_max = itc2;
ptc_unlock(flags, opt);
if (old_rr) {
ia64_set_rr(start, old_rr);
ia64_srlz_d();
}
ptc_unlock(shub1, flags);
preempt_enable();
}
@ -321,27 +270,30 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
* TLB flush transaction. The recovery sequence is somewhat tricky & is
* coded in assembly language.
*/
void sn2_ptc_deadlock_recovery(short *nasids, short nix, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
void sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
volatile unsigned long *ptc1, unsigned long data1)
{
extern void sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
extern unsigned long sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long);
short nasid, i;
unsigned long *piows, zeroval;
unsigned long *piows, zeroval, n;
__get_cpu_var(ptcstats).deadlocks++;
piows = (unsigned long *) pda->pio_write_status_addr;
zeroval = pda->pio_write_status_val;
for (i=0; i < nix; i++) {
for (i=ib; i <= ie; i++) {
nasid = nasids[i];
if (!(sn2_ptctest & 3) && nasid == mynasid)
if (local_node_uses_ptc_ga(is_shub1()) && nasid == mynasid)
continue;
ptc0 = CHANGE_NASID(nasid, ptc0);
if (ptc1)
ptc1 = CHANGE_NASID(nasid, ptc1);
sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
n = sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
__get_cpu_var(ptcstats).deadlocks2 += n;
}
}
@ -452,20 +404,22 @@ static int sn2_ptc_seq_show(struct seq_file *file, void *data)
cpu = *(loff_t *) data;
if (!cpu) {
seq_printf(file, "# ptc_l change_rid shub_ptc_flushes shub_nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max\n");
seq_printf(file,
"# cpu ptc_l newrid ptc_flushes nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max not_my_mm deadlock2\n");
seq_printf(file, "# ptctest %d\n", sn2_ptctest);
}
if (cpu < NR_CPUS && cpu_online(cpu)) {
stat = &per_cpu(ptcstats, cpu);
seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed,
stat->deadlocks,
1000 * stat->lock_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
1000 * stat->shub_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec);
1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec,
stat->shub_ptc_flushes_not_my_mm,
stat->deadlocks2);
}
return 0;
}
@ -476,7 +430,7 @@ static struct seq_operations sn2_ptc_seq_ops = {
.show = sn2_ptc_seq_show
};
int sn2_ptc_proc_open(struct inode *inode, struct file *file)
static int sn2_ptc_proc_open(struct inode *inode, struct file *file)
{
return seq_open(file, &sn2_ptc_seq_ops);
}

5
arch/ia64/sn/kernel/sn2/sn_hwperf.c
View File

@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004-2005 Silicon Graphics, Inc. All rights reserved.
* Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved.
*
* SGI Altix topology and hardware performance monitoring API.
* Mark Goodwin <markgw@sgi.com>.
@ -973,6 +973,9 @@ static int __devinit sn_hwperf_misc_register_init(void)
{
int e;
if (!ia64_platform_is("sn2"))
return 0;
sn_hwperf_init();
/*

19
arch/ia64/sn/kernel/xpc_main.c
View File

@ -575,18 +575,21 @@ xpc_activate_partition(struct xpc_partition *part)
spin_lock_irqsave(&part->act_lock, irq_flags);
pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
DBUG_ON(part->act_state != XPC_P_INACTIVE);
if (pid > 0) {
part->act_state = XPC_P_ACTIVATION_REQ;
XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
} else {
XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
}
part->act_state = XPC_P_ACTIVATION_REQ;
XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0);
if (unlikely(pid <= 0)) {
spin_lock_irqsave(&part->act_lock, irq_flags);
part->act_state = XPC_P_INACTIVE;
XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
}
}

2
arch/ia64/sn/pci/Makefile
View File

@ -7,4 +7,6 @@
#
# Makefile for the sn pci general routines.
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/

2
arch/ia64/sn/pci/pcibr/Makefile
View File

@ -7,5 +7,7 @@
#
# Makefile for the sn2 io routines.
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y += pcibr_dma.o pcibr_reg.o \
pcibr_ate.o pcibr_provider.o

5
arch/m32r/kernel/m32r_ksyms.c
View File

@ -18,11 +18,6 @@
#include <asm/irq.h>
#include <asm/tlbflush.h>
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
extern struct drive_info_struct drive_info;
EXPORT_SYMBOL(drive_info);
#endif
/* platform dependent support */
EXPORT_SYMBOL(boot_cpu_data);
EXPORT_SYMBOL(dump_fpu);

6
arch/m32r/kernel/setup.c
View File

@ -37,12 +37,6 @@
extern void init_mmu(void);
#endif
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) \
|| defined(CONFIG_BLK_DEV_IDE_MODULE) \
|| defined(CONFIG_BLK_DEV_HD_MODULE)
struct drive_info_struct { char dummy[32]; } drive_info;
#endif
extern char _end[];
/*

8
arch/m68knommu/kernel/process.c
View File

@ -39,6 +39,14 @@
asmlinkage void ret_from_fork(void);
/*
* The following aren't currently used.
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
/*
* The idle loop on an m68knommu..

1
arch/mips/Kconfig
View File

@ -595,6 +595,7 @@ config SGI_IP32
select SYS_HAS_CPU_R5000
select SYS_HAS_CPU_R10000 if BROKEN
select SYS_HAS_CPU_RM7000
select SYS_HAS_CPU_NEVADA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
help

25
arch/mips/Makefile
View File

@ -53,14 +53,17 @@ CROSS_COMPILE := $(tool-prefix)
endif
CHECKFLAGS-y += -D__linux__ -D__mips__ \
-D_MIPS_SZINT=32 \
-D_ABIO32=1 \
-D_ABIN32=2 \
-D_ABI64=3
CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
-D_MIPS_SZLONG=32 \
-D_MIPS_SZPTR=32 \
-D__PTRDIFF_TYPE__=int
CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
-D_MIPS_SZLONG=64 \
-D_MIPS_SZPTR=64 \
-D__PTRDIFF_TYPE__="long int"
CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
@ -166,79 +169,97 @@ echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_i
#
cflags-$(CONFIG_CPU_R3000) += \
$(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
cflags-$(CONFIG_CPU_TX39XX) += \
$(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
cflags-$(CONFIG_CPU_R6000) += \
$(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2
cflags-$(CONFIG_CPU_R4300) += \
$(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_VR41XX) += \
$(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_R4X00) += \
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_TX49XX) += \
$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
cflags-$(CONFIG_CPU_MIPS32_R1) += \
$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
cflags-$(CONFIG_CPU_MIPS32_R2) += \
$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
cflags-$(CONFIG_CPU_MIPS64_R1) += \
$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_MIPS64_R2) += \
$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_R5000) += \
$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_R5432) += \
$(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_NEVADA) += \
$(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
-Wa,--trap
# $(call cc-option,-mmad)
CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_RM7000) += \
$(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_RM9000) += \
$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_SB1) += \
$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
cflags-$(CONFIG_CPU_R8000) += \
$(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
cflags-$(CONFIG_CPU_R10000) += \
$(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
-Wa,--trap
CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
ifdef CONFIG_CPU_SB1
ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
@ -369,7 +390,7 @@ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt
cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#

2
arch/mips/au1000/common/reset.c
View File

@ -151,7 +151,7 @@ void au1000_restart(char *command)
}
set_c0_status(ST0_BEV | ST0_ERL);
set_c0_config(CONF_CM_UNCACHED);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);

3
arch/mips/au1000/common/setup.c
View File

@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@ -125,7 +126,7 @@ void __init plat_setup(void)
#endif
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
_machine_power_off = au1000_power_off;
pm_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;

2
arch/mips/cobalt/int-handler.S
View File

@ -8,7 +8,7 @@
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/cobalt/cobalt.h>
#include <asm/mach-cobalt/cobalt.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>

2
arch/mips/cobalt/irq.c
View File

@ -18,7 +18,7 @@
#include <asm/gt64120.h>
#include <asm/ptrace.h>
#include <asm/cobalt/cobalt.h>
#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_handle_int(void);

2
arch/mips/cobalt/reset.c
View File

@ -16,7 +16,7 @@
#include <asm/reboot.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/cobalt/cobalt.h>
#include <asm/mach-cobalt/cobalt.h>
void cobalt_machine_halt(void)
{

9
arch/mips/cobalt/setup.c
View File

@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
*
*/
@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
@ -25,7 +26,7 @@
#include <asm/gt64120.h>
#include <asm/serial.h>
#include <asm/cobalt/cobalt.h>
#include <asm/mach-cobalt/cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
@ -99,7 +100,7 @@ void __init plat_setup(void)
_machine_restart = cobalt_machine_restart;
_machine_halt = cobalt_machine_halt;
_machine_power_off = cobalt_machine_power_off;
pm_power_off = cobalt_machine_power_off;
board_timer_setup = cobalt_timer_setup;
@ -139,7 +140,7 @@ void __init plat_setup(void)
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
uart.irq = COBALT_SERIAL_IRQ;
uart.flags = STD_COM_FLAGS;
uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
uart.iobase = 0xc800000;
uart.iotype = UPIO_PORT;

1
arch/mips/configs/ip32_defconfig
View File

@ -102,6 +102,7 @@ CONFIG_CPU_R5000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_R5000=y
CONFIG_SYS_HAS_CPU_NEVADA=y
CONFIG_SYS_HAS_CPU_RM7000=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y

78
arch/mips/configs/qemu_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc2
# Thu Nov 24 01:07:00 2005
# Linux kernel version: 2.6.16-rc2
# Fri Feb 3 17:14:27 2006
#
CONFIG_MIPS=y
@ -147,26 +147,27 @@ CONFIG_LOCALVERSION_AUTO=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_SHMEM is not set
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
# CONFIG_SLOB is not set
#
# Loadable module support
@ -266,11 +267,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
# CONFIG_IEEE80211 is not set
#
# Device Drivers
@ -323,7 +320,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@ -366,24 +363,16 @@ CONFIG_NETDEVICES=y
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
@ -479,6 +468,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@ -517,6 +507,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
@ -591,12 +587,15 @@ CONFIG_DUMMY_CONSOLE=y
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@ -677,6 +676,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@ -690,31 +690,7 @@ CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
@ -724,8 +700,6 @@ CONFIG_CRYPTO_CRC32C=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_LIBCRC32C is not set

3
arch/mips/ddb5xxx/ddb5074/setup.c
View File

@ -14,6 +14,7 @@
#include <linux/ide.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
@ -95,7 +96,7 @@ void __init plat_setup(void)
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
pm_power_off = ddb_machine_power_off;
ddb_out32(DDB_BAR0, 0);

3
arch/mips/ddb5xxx/ddb5476/setup.c
View File

@ -11,6 +11,7 @@
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
@ -133,7 +134,7 @@ void __init plat_setup(void)
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
pm_power_off = ddb_machine_power_off;
/* request io port/mem resources */
if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||

3
arch/mips/ddb5xxx/ddb5477/setup.c
View File

@ -26,6 +26,7 @@
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@ -182,7 +183,7 @@ void __init plat_setup(void)
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
pm_power_off = ddb_machine_power_off;
/* setup resource limits */
ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;

3
arch/mips/dec/setup.c
View File

@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
@ -158,7 +159,7 @@ void __init plat_setup(void)
_machine_restart = dec_machine_restart;
_machine_halt = dec_machine_halt;
_machine_power_off = dec_machine_power_off;
pm_power_off = dec_machine_power_off;
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;

4
arch/mips/gt64120/ev64120/setup.c
View File

@ -34,6 +34,8 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
@ -73,7 +75,7 @@ void __init plat_setup(void)
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
_machine_power_off = galileo_machine_power_off;
pm_power_off = galileo_machine_power_off;
board_time_init = gt64120_time_init;
set_io_port_base(KSEG1);

6
arch/mips/gt64120/momenco_ocelot/setup.c
View File

@ -4,7 +4,7 @@
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot (CP7000) - board dependent boot routines
*
* Copyright (C) 1996, 1997, 2001 Ralf Baechle
* Copyright (C) 1996, 1997, 2001, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
@ -47,6 +47,8 @@
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
#include <linux/pm.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@ -159,7 +161,7 @@ void __init plat_setup(void)
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
_machine_power_off = momenco_ocelot_power_off;
pm_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;

3
arch/mips/ite-boards/generic/it8172_setup.c
View File

@ -34,6 +34,7 @@
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/time.h>
@ -125,7 +126,7 @@ void __init plat_setup(void)
_machine_restart = it8172_restart;
_machine_halt = it8172_halt;
_machine_power_off = it8172_power_off;
pm_power_off = it8172_power_off;
/*
* IO/MEM resources.

4
arch/mips/jazz/setup.c
View File

@ -19,6 +19,8 @@
#include <linux/console.h>
#include <linux/fb.h>
#include <linux/ide.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/jazz.h>
@ -79,7 +81,7 @@ void __init plat_setup(void)
_machine_restart = jazz_machine_restart;
_machine_halt = jazz_machine_halt;
_machine_power_off = jazz_machine_power_off;
pm_power_off = jazz_machine_power_off;
#warning "Somebody should check if screen_info is ok for Jazz."

3
arch/mips/jmr3927/rbhma3100/setup.c
View File

@ -44,6 +44,7 @@
#include <linux/ioport.h>
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
#include <linux/pm.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
@ -211,7 +212,7 @@ void __init plat_setup(void)
_machine_restart = jmr3927_machine_restart;
_machine_halt = jmr3927_machine_halt;
_machine_power_off = jmr3927_machine_power_off;
pm_power_off = jmr3927_machine_power_off;
/*
* IO/MEM resources.

7
arch/mips/kernel/cpu-probe.c
View File

@ -2,8 +2,8 @@
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
* Copyright (C) 1994 - 2003 Ralf Baechle
* Copyright (C) 2001, 2004 MIPS Inc.
*
* This program is free software; you can redistribute it and/or
@ -641,10 +641,9 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
/* FPU in pass1 is known to have issues. */
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
#endif
if ((c->processor_id & 0xff) < 0x20)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;

2
arch/mips/kernel/genex.S
View File

@ -233,11 +233,11 @@ NESTED(except_vec_nmi, 0, sp)
NESTED(nmi_handler, PT_SIZE, sp)
.set push
.set noat
.set mips3
SAVE_ALL
move a0, sp
jal nmi_exception_handler
RESTORE_ALL
.set mips3
eret
.set pop
END(nmi_handler)

5
arch/mips/kernel/process.c
View File

@ -4,6 +4,7 @@
* for more details.
*
* Copyright (C) 1994 - 1999, 2000 by Ralf Baechle and others.
* Copyright (C) 2005, 2006 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2004 Thiemo Seufer
*/
@ -58,8 +59,8 @@ ATTRIB_NORET void cpu_idle(void)
}
}
extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
extern void do_signal(struct pt_regs *regs);
extern void do_signal32(struct pt_regs *regs);
/*
* Native o32 and N64 ABI without DSP ASE

22
arch/mips/kernel/ptrace32.c
View File

@ -88,7 +88,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
ret = -EIO;
if (copied != sizeof(tmp))
break;
ret = put_user(tmp, (unsigned int *) (unsigned long) data);
ret = put_user(tmp, (unsigned int __user *) (unsigned long) data);
break;
}
@ -174,8 +174,10 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
if (!cpu_has_fpu)
if (!cpu_has_fpu) {
tmp = 0;
break;
}
preempt_disable();
if (cpu_has_mipsmt) {
@ -194,15 +196,18 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
preempt_enable();
break;
}
case DSP_BASE ... DSP_BASE + 5:
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
goto out_tsk;
}
dspreg_t *dregs = __get_dsp_regs(child);
dregs = __get_dsp_regs(child);
tmp = (unsigned long) (dregs[addr - DSP_BASE]);
break;
}
case DSP_CONTROL:
if (!cpu_has_dsp) {
tmp = 0;
@ -216,7 +221,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
ret = -EIO;
goto out_tsk;
}
ret = put_user(tmp, (unsigned *) (unsigned long) data);
ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
break;
}
@ -304,15 +309,18 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
else
child->thread.fpu.soft.fcr31 = data;
break;
case DSP_BASE ... DSP_BASE + 5:
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
if (!cpu_has_dsp) {
ret = -EIO;
break;
}
dspreg_t *dregs = __get_dsp_regs(child);
dregs = __get_dsp_regs(child);
dregs[addr - DSP_BASE] = data;
break;
}
case DSP_CONTROL:
if (!cpu_has_dsp) {
ret = -EIO;

Some files were not shown because too many files have changed in this diff Show More