arm64: dts: Amlogic updates for v5.3
Highlights: - new SoC: S922X (G12B family, A73/A53 big.LITTLE) - new board: Hardkernel odroid-N2 (SoC: G12B S922X) - add/use ethernet PHY interrupt/reset lines - G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network - gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0L+UIACgkQWTcYmtP7 xmXf3A/7B3NzV6ESRTpcbZVh4V2esBb/1DYXYqbiliBGt3xvsmSi1sqQY8DN1Vpq M07fzWcwDXVAEa9Yd6UmS2zzxV61AxZHvGhr7+zTJ+2wTpSTfvRcnC3x8AF1rqVy TCC/VzDKtA3s/D0se0iHm6y/Aj/ysWBDQ7boT6Ex2pKm0WoC8qT5zDaYFBtV1i4W vo0xWhcbGiaif3OzDi6Y9qtPSbgPBOKFG9/tXSasxAR9rqx5LSnEBOP+HQUTMVTj K2fLcxAHR0833OrNkg27CUJDZBGI74otgUZv+ZFBYHDbb1x8gWYYBAKzO/sp7bBW rJRoZ4ILHfszRJjpH87x8+KCcQunuCq+R9eGTt0B4i871JH2uMPhUp7jiZO4WRbm yzFVkfxNM+3F+ZIy82JFPoKnHkTbvwyGCxQm3dzJROMx8f81rIS0EnCSvr4noGst +vo+brMgbiUYmKzB9wGklnQBuiRxes5xnoKo7WtiAYwJfmemWak7S8xOcNTnMXdY o56o0o+bf5QHM2GkYpUk4E3xst+WTgrALUePSm6MgBmwyePoTkMFywpdHFWT3edX lHxAgkRs2zctk0N3fm9nzASC991tTLY4De5/yPLQ5J8yzpXp0gDsIHV0RPJ8y7j8 EeqAhbwxtLRqxaTPxQQai+5JWe7ExtzLfRQWpgTUn0yzVwPUIpg= =f2yc -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.3 Highlights: - new SoC: S922X (G12B family, A73/A53 big.LITTLE) - new board: Hardkernel odroid-N2 (SoC: G12B S922X) - add/use ethernet PHY interrupt/reset lines - G12A: add/enable audio, PWM, IR, i2c, SD/eMMC, WiFi, bluetooth, network - gxbb-vega-s95 board: fix WiFi/BT, enable more peripherals * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (79 commits) arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line arm64: dts: meson: g12a: sort sdio nodes correctly arm64: dts: meson-g12a-x96-max: add sound card arm64: dts: meson-g12b-odroid-n2: add sound card arm64: dts: meson: sei510: add sound card arm64: dts: meson: sei510: add max98357a DAC ASoC: meson: add tohdmitx DT bindings arm64: dts: meson: g12a: add the GPIO interrupt controller arm64: dts: meson-g12a-x96-max: bump bluetooth bus speed to 2Mbaud/s arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/s arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node arm64: dts: meson-g12a-sei510: Enable Wifi SDIO module arm64: dts: meson-g12a-x96-max: Enable Wifi SDIO Module arm64: dts: meson-g12a-x96-max: add support for sdcard and emmc arm64: dts: meson: g12a: add SDIO controller ... Signed-off-by: Olof Johansson <olof@lixom.net>alistair/sunxi64-5.4-dsi
Olof Johansson
commit
d78cda5aa0
|
|
@ -1,142 +0,0 @@
|
|||
Amlogic MesonX device tree bindings
|
||||
-------------------------------------------
|
||||
|
||||
Work in progress statement:
|
||||
|
||||
Device tree files and bindings applying to Amlogic SoCs and boards are
|
||||
considered "unstable". Any Amlogic device tree binding may change at
|
||||
any time. Be sure to use a device tree binary and a kernel image
|
||||
generated from the same source tree.
|
||||
|
||||
Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
|
||||
stable binding/ABI.
|
||||
|
||||
---------------------------------------------------------------
|
||||
|
||||
Boards with the Amlogic Meson6 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,meson6"
|
||||
|
||||
Boards with the Amlogic Meson8 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,meson8";
|
||||
|
||||
Boards with the Amlogic Meson8b SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,meson8b";
|
||||
|
||||
Boards with the Amlogic Meson8m2 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,meson8m2";
|
||||
|
||||
Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,meson-gxbb";
|
||||
|
||||
Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s905x", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s905d", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s805x", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s905w", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s912", "amlogic,meson-gxm";
|
||||
|
||||
Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,a113d", "amlogic,meson-axg";
|
||||
|
||||
Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,g12a";
|
||||
|
||||
Board compatible values (alphabetically, grouped by SoC):
|
||||
|
||||
- "geniatech,atv1200" (Meson6)
|
||||
|
||||
- "minix,neo-x8" (Meson8)
|
||||
|
||||
- "endless,ec100" (Meson8b)
|
||||
- "hardkernel,odroid-c1" (Meson8b)
|
||||
- "tronfy,mxq" (Meson8b)
|
||||
|
||||
- "tronsmart,mxiii-plus" (Meson8m2)
|
||||
|
||||
- "amlogic,p200" (Meson gxbb)
|
||||
- "amlogic,p201" (Meson gxbb)
|
||||
- "friendlyarm,nanopi-k2" (Meson gxbb)
|
||||
- "hardkernel,odroid-c2" (Meson gxbb)
|
||||
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
|
||||
- "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
|
||||
- "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
|
||||
- "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
|
||||
- "wetek,hub" (Meson gxbb)
|
||||
- "wetek,play2" (Meson gxbb)
|
||||
|
||||
- "amlogic,p212" (Meson gxl s905x)
|
||||
- "hwacom,amazetv" (Meson gxl s905x)
|
||||
- "khadas,vim" (Meson gxl s905x)
|
||||
- "libretech,cc" (Meson gxl s905x)
|
||||
|
||||
- "amlogic,p230" (Meson gxl s905d)
|
||||
- "amlogic,p231" (Meson gxl s905d)
|
||||
- "phicomm,n1" (Meson gxl s905d)
|
||||
|
||||
- "amlogic,p241" (Meson gxl s805x)
|
||||
- "libretech,aml-s805x-ac" (Meson gxl s805x)
|
||||
|
||||
- "amlogic,p281" (Meson gxl s905w)
|
||||
- "oranth,tx3-mini" (Meson gxl s905w)
|
||||
|
||||
- "amlogic,q200" (Meson gxm s912)
|
||||
- "amlogic,q201" (Meson gxm s912)
|
||||
- "khadas,vim2" (Meson gxm s912)
|
||||
- "kingnovel,r-box-pro" (Meson gxm S912)
|
||||
- "nexbox,a1" (Meson gxm s912)
|
||||
- "tronsmart,vega-s96" (Meson gxm s912)
|
||||
|
||||
- "amlogic,s400" (Meson axg a113d)
|
||||
|
||||
- "amlogic,u200" (Meson g12a s905d2)
|
||||
- "amediatech,x96-max" (Meson g12a s905x2)
|
||||
- "seirobotics,sei510" (Meson g12a s905x2)
|
||||
|
||||
Amlogic Meson Firmware registers Interface
|
||||
------------------------------------------
|
||||
|
||||
The Meson SoCs have a register bank with status and data shared with the
|
||||
secure firmware.
|
||||
|
||||
Required properties:
|
||||
- compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
|
||||
|
||||
Properties should indentify components of this register interface :
|
||||
|
||||
Meson GX SoC Information
|
||||
------------------------
|
||||
A firmware register encodes the SoC type, package and revision information on
|
||||
the Meson GX SoCs.
|
||||
If present, the following property should be added :
|
||||
|
||||
Optional properties:
|
||||
- amlogic,has-chip-id: If present, the interface gives the current SoC version.
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
ao-secure@140 {
|
||||
compatible = "amlogic,meson-gx-ao-secure", "syscon";
|
||||
reg = <0x0 0x140 0x0 0x140>;
|
||||
amlogic,has-chip-id;
|
||||
};
|
||||
|
|
@ -0,0 +1,144 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/amlogic.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Amlogic MesonX device tree bindings
|
||||
|
||||
maintainers:
|
||||
- Kevin Hilman <khilman@baylibre.com>
|
||||
|
||||
description: |+
|
||||
Work in progress statement:
|
||||
|
||||
Device tree files and bindings applying to Amlogic SoCs and boards are
|
||||
considered "unstable". Any Amlogic device tree binding may change at
|
||||
any time. Be sure to use a device tree binary and a kernel image
|
||||
generated from the same source tree.
|
||||
|
||||
Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
|
||||
stable binding/ABI.
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
const: '/'
|
||||
compatible:
|
||||
oneOf:
|
||||
- description: Boards with the Amlogic Meson6 SoC
|
||||
items:
|
||||
- enum:
|
||||
- geniatech,atv1200
|
||||
- const: amlogic,meson6
|
||||
|
||||
- description: Boards with the Amlogic Meson8 SoC
|
||||
items:
|
||||
- enum:
|
||||
- minix,neo-x8
|
||||
- const: amlogic,meson8
|
||||
|
||||
- description: Boards with the Amlogic Meson8m2 SoC
|
||||
items:
|
||||
- enum:
|
||||
- tronsmart,mxiii-plus
|
||||
- const: amlogic,meson8m2
|
||||
|
||||
- description: Boards with the Amlogic Meson8b SoC
|
||||
items:
|
||||
- enum:
|
||||
- endless,ec100
|
||||
- hardkernel,odroid-c1
|
||||
- tronfy,mxq
|
||||
- const: amlogic,meson8b
|
||||
|
||||
- description: Boards with the Amlogic Meson GXBaby SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,p200
|
||||
- amlogic,p201
|
||||
- friendlyarm,nanopi-k2
|
||||
- hardkernel,odroid-c2
|
||||
- nexbox,a95x
|
||||
- wetek,hub
|
||||
- wetek,play2
|
||||
- const: amlogic,meson-gxbb
|
||||
|
||||
- description: Tronsmart Vega S95 devices
|
||||
items:
|
||||
- enum:
|
||||
- tronsmart,vega-s95-pro
|
||||
- tronsmart,vega-s95-meta
|
||||
- tronsmart,vega-s95-telos
|
||||
- const: tronsmart,vega-s95
|
||||
- const: amlogic,meson-gxbb
|
||||
|
||||
- description: Boards with the Amlogic Meson GXL S805X SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,p241
|
||||
- libretech,aml-s805x-ac
|
||||
- const: amlogic,s805x
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
- description: Boards with the Amlogic Meson GXL S905W SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,p281
|
||||
- oranth,tx3-mini
|
||||
- const: amlogic,s905w
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
- description: Boards with the Amlogic Meson GXL S905X SoC
|
||||
items:
|
||||
- enum:
|
||||
- amediatech,x96-max
|
||||
- amlogic,p212
|
||||
- hwacom,amazetv
|
||||
- khadas,vim
|
||||
- libretech,cc
|
||||
- nexbox,a95x
|
||||
- seirobotics,sei510
|
||||
- const: amlogic,s905x
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
- description: Boards with the Amlogic Meson GXL S905D SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,p230
|
||||
- amlogic,p231
|
||||
- phicomm,n1
|
||||
- const: amlogic,s905d
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
- description: Boards with the Amlogic Meson GXM S912 SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,q200
|
||||
- amlogic,q201
|
||||
- khadas,vim2
|
||||
- kingnovel,r-box-pro
|
||||
- nexbox,a1
|
||||
- tronsmart,vega-s96
|
||||
- const: amlogic,s912
|
||||
- const: amlogic,meson-gxm
|
||||
|
||||
- description: Boards with the Amlogic Meson AXG A113D SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,s400
|
||||
- const: amlogic,a113d
|
||||
- const: amlogic,meson-axg
|
||||
|
||||
- description: Boards with the Amlogic Meson G12A S905D2 SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,u200
|
||||
- const: amlogic,g12a
|
||||
|
||||
- description: Boards with the Amlogic Meson G12B S922X SoC
|
||||
items:
|
||||
- enum:
|
||||
- hardkernel,odroid-n2
|
||||
- const: amlogic,g12b
|
||||
|
||||
...
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
Amlogic Meson Firmware registers Interface
|
||||
------------------------------------------
|
||||
|
||||
The Meson SoCs have a register bank with status and data shared with the
|
||||
secure firmware.
|
||||
|
||||
Required properties:
|
||||
- compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
|
||||
|
||||
Properties should indentify components of this register interface :
|
||||
|
||||
Meson GX SoC Information
|
||||
------------------------
|
||||
A firmware register encodes the SoC type, package and revision information on
|
||||
the Meson GX SoCs.
|
||||
If present, the following property should be added :
|
||||
|
||||
Optional properties:
|
||||
- amlogic,has-chip-id: If present, the interface gives the current SoC version.
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
ao-secure@140 {
|
||||
compatible = "amlogic,meson-gx-ao-secure", "syscon";
|
||||
reg = <0x0 0x140 0x0 0x140>;
|
||||
amlogic,has-chip-id;
|
||||
};
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
* Amlogic HDMI Tx control glue
|
||||
|
||||
Required properties:
|
||||
- compatible: "amlogic,g12a-tohdmitx"
|
||||
- reg: physical base address of the controller and length of memory
|
||||
mapped region.
|
||||
- #sound-dai-cells: should be 1.
|
||||
|
||||
Example on the S905X2 SoC:
|
||||
|
||||
tohdmitx: audio-controller@744 {
|
||||
compatible = "amlogic,g12a-tohdmitx";
|
||||
reg = <0x0 0x744 0x0 0x4>;
|
||||
#sound-dai-cells = <1>;
|
||||
};
|
||||
|
||||
Example of an 'amlogic,axg-sound-card':
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
|
||||
[...]
|
||||
|
||||
dai-link-x {
|
||||
sound-dai = <&tdmif_a>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
|
||||
};
|
||||
|
||||
codec-1 {
|
||||
sound-dai = <&external_dac>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-y {
|
||||
sound-dai = <&tdmif_c>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-z {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
|
|||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
|
||||
|
|
|
|||
|
|
@ -482,8 +482,8 @@
|
|||
|
||||
/* emmc storage */
|
||||
&sd_emmc_c {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
|
|
|
|||
|
|
@ -171,7 +171,9 @@
|
|||
ranges;
|
||||
|
||||
ethmac: ethernet@ff3f0000 {
|
||||
compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
|
||||
compatible = "amlogic,meson-axg-dwmac",
|
||||
"snps,dwmac-3.70a",
|
||||
"snps,dwmac";
|
||||
reg = <0x0 0xff3f0000 0x0 0x10000
|
||||
0x0 0xff634540 0x0 0x8>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -299,7 +301,7 @@
|
|||
};
|
||||
|
||||
emmc_pins: emmc {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "emmc_nand_d0",
|
||||
"emmc_nand_d1",
|
||||
"emmc_nand_d2",
|
||||
|
|
@ -308,14 +310,26 @@
|
|||
"emmc_nand_d5",
|
||||
"emmc_nand_d6",
|
||||
"emmc_nand_d7",
|
||||
"emmc_clk",
|
||||
"emmc_cmd",
|
||||
"emmc_ds";
|
||||
"emmc_cmd";
|
||||
function = "emmc";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "emmc_clk";
|
||||
function = "emmc";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_ds_pins: emmc_ds {
|
||||
mux {
|
||||
groups = "emmc_ds";
|
||||
function = "emmc";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_clk_gate_pins: emmc_clk_gate {
|
||||
mux {
|
||||
groups = "BOOT_8";
|
||||
|
|
@ -559,13 +573,18 @@
|
|||
};
|
||||
|
||||
sdio_pins: sdio {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "sdio_d0",
|
||||
"sdio_d1",
|
||||
"sdio_d2",
|
||||
"sdio_d3",
|
||||
"sdio_cmd",
|
||||
"sdio_clk";
|
||||
"sdio_cmd";
|
||||
function = "sdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdio_clk";
|
||||
function = "sdio";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,15 +9,12 @@
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
compatible = "seirobotics,sei510", "amlogic,g12a";
|
||||
model = "SEI Robotics SEI510";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
};
|
||||
|
||||
adc_keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
|
|
@ -31,13 +28,25 @@
|
|||
};
|
||||
};
|
||||
|
||||
ao_5v: regulator-ao_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "AO_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
mono_dac: audio-codec-0 {
|
||||
compatible = "maxim,max98357a";
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "U16";
|
||||
sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
dmics: audio-codec-1 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "dmic-codec";
|
||||
num-channels = <2>;
|
||||
wakeup-delay-ms = <50>;
|
||||
status = "okay";
|
||||
sound-name-prefix = "MIC";
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
|
@ -54,21 +63,9 @@
|
|||
};
|
||||
};
|
||||
|
||||
dc_in: regulator-dc_in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
|
|
@ -87,12 +84,30 @@
|
|||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
/* TEE Reserved Memory */
|
||||
bl32_reserved: bl32@5000000 {
|
||||
reg = <0x0 0x05300000 0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
ao_5v: regulator-ao_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "AO_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dc_in: regulator-dc_in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
|
|
@ -122,6 +137,146 @@
|
|||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
/* TEE Reserved Memory */
|
||||
bl32_reserved: bl32@5000000 {
|
||||
reg = <0x0 0x05300000 0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "G12A-SEI510";
|
||||
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
|
||||
<&tdmin_a>, <&tdmin_b>;
|
||||
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
|
||||
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
|
||||
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
|
||||
"TDM_A Playback", "TDMOUT_A OUT",
|
||||
"TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT",
|
||||
"TODDR_A IN 4", "PDM Capture",
|
||||
"TODDR_B IN 4", "PDM Capture",
|
||||
"TODDR_C IN 4", "PDM Capture",
|
||||
"TDMIN_A IN 0", "TDM_A Capture",
|
||||
"TDMIN_A IN 3", "TDM_A Loopback",
|
||||
"TDMIN_B IN 0", "TDM_A Capture",
|
||||
"TDMIN_B IN 3", "TDM_A Loopback",
|
||||
"TDMIN_A IN 1", "TDM_B Capture",
|
||||
"TDMIN_A IN 4", "TDM_B Loopback",
|
||||
"TDMIN_B IN 1", "TDM_B Capture",
|
||||
"TDMIN_B IN 4", "TDM_B Loopback",
|
||||
"TODDR_A IN 0", "TDMIN_A OUT",
|
||||
"TODDR_B IN 0", "TDMIN_A OUT",
|
||||
"TODDR_C IN 0", "TDMIN_A OUT",
|
||||
"TODDR_A IN 1", "TDMIN_B OUT",
|
||||
"TODDR_B IN 1", "TDMIN_B OUT",
|
||||
"TODDR_C IN 1", "TDMIN_B OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
dai-link-3 {
|
||||
sound-dai = <&toddr_a>;
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&toddr_b>;
|
||||
};
|
||||
|
||||
dai-link-5 {
|
||||
sound-dai = <&toddr_c>;
|
||||
};
|
||||
|
||||
/* internal speaker interface */
|
||||
dai-link-6 {
|
||||
sound-dai = <&tdmif_a>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&mono_dac>;
|
||||
};
|
||||
|
||||
codec-1 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
|
||||
};
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-7 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec@0 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* internal digital mics */
|
||||
dai-link-8 {
|
||||
sound-dai = <&pdm>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&dmics>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-9 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
|
|
@ -138,27 +293,32 @@
|
|||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
ðmac {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao1v8>;
|
||||
phy-handle = <&internal_ephy>;
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
};
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
|
|
@ -173,6 +333,163 @@
|
|||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&pdm {
|
||||
pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
|
||||
<&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
|
||||
<&pdm_dclk_z_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao1v8>;
|
||||
};
|
||||
|
||||
/* SDIO */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr50;
|
||||
max-frequency = <100000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_ao1v8>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&emmc_1v8>;
|
||||
};
|
||||
|
||||
&tdmif_a {
|
||||
pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
|
||||
<&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
|
||||
assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
|
||||
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
|
||||
assigned-clock-rates = <0>, <0>;
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <&vddao_3v3>;
|
||||
vddio-supply = <&vddio_ao1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
|
|
|
|||
|
|
@ -15,14 +15,12 @@
|
|||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
cvbs-connector {
|
||||
compatible = "composite-video-connector";
|
||||
|
|
@ -34,13 +32,9 @@
|
|||
};
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
|
|
@ -54,6 +48,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
main_12v: regulator-main_12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "12V";
|
||||
|
|
@ -62,6 +70,17 @@
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb_pwr_en: regulator-usb_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
|
|
@ -92,17 +111,6 @@
|
|||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_pwr_en: regulator-usb_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
|
|
@ -143,6 +151,12 @@
|
|||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
phy-handle = <&internal_ephy>;
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
|
|
@ -156,6 +170,70 @@
|
|||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* i2c Touch */
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* i2c CM */
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* i2c Audio */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&flash_1v8>;
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@
|
|||
#include "meson-g12a.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
|
||||
|
|
@ -15,7 +16,16 @@
|
|||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
spdif_dit: audio-codec-1 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "linux,spdif-dit";
|
||||
status = "okay";
|
||||
sound-name-prefix = "DIT";
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
|
@ -45,6 +55,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
|
|
@ -109,6 +131,97 @@
|
|||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "G12A-X96-MAX";
|
||||
audio-aux-devs = <&tdmout_b>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT",
|
||||
"SPDIFOUT IN 0", "FRDDR_A OUT 3",
|
||||
"SPDIFOUT IN 1", "FRDDR_B OUT 3",
|
||||
"SPDIFOUT IN 2", "FRDDR_C OUT 3";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-3 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* spdif hdmi or toslink interface */
|
||||
dai-link-4 {
|
||||
sound-dai = <&spdifout>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
|
||||
codec-1 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
|
||||
};
|
||||
};
|
||||
|
||||
/* spdif hdmi interface */
|
||||
dai-link-5 {
|
||||
sound-dai = <&spdifout_b>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-6 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
|
|
@ -125,12 +238,28 @@
|
|||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
|
|
@ -144,6 +273,46 @@
|
|||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
eee-broken-1000t;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&external_phy>;
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
|
|
@ -153,6 +322,9 @@
|
|||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -166,3 +338,88 @@
|
|||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
/* SDIO */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr50;
|
||||
max-frequency = <100000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_1v8>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&flash_1v8>;
|
||||
};
|
||||
|
||||
&spdifout {
|
||||
pinctrl-0 = <&spdif_out_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdifout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,386 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-g12b.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
compatible = "hardkernel,odroid-n2", "amlogic,g12b";
|
||||
model = "Hardkernel ODROID-N2";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue {
|
||||
label = "n2:blue";
|
||||
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
tf_io: gpio-regulator-tf_io {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "TF_IO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
|
||||
states = <3300000 0
|
||||
1800000 1>;
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
main_12v: regulator-main_12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&main_12v>;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
/* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
};
|
||||
|
||||
hub_5v: regulator-hub_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "HUB_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
/* Connected to the Hub CHIPENABLE, LOW sets low power state */
|
||||
gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_pwr_en: regulator-usb_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
/* Connected to the microUSB port power enable */
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&main_12v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "G12A-ODROIDN2";
|
||||
audio-aux-devs = <&tdmout_b>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-3 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-4 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
pinctrl-0 = <&cec_ao_a_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&external_phy>;
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
/*
|
||||
* WARNING: The USB Hub on the Odroid-N2 needs a reset signal
|
||||
* to be turned high in order to be detected by the USB Controller
|
||||
* This signal should be handled by a USB specific power sequence
|
||||
* in order to reset the Hub when USB bus is powered down.
|
||||
*/
|
||||
usb-hub {
|
||||
gpio-hog;
|
||||
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "usb-hub-reset";
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&tf_io>;
|
||||
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&flash_1v8>;
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
vbus-supply = <&usb_pwr_en>;
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
/* Enable the hub which is connected to this port */
|
||||
phy-supply = <&hub_5v>;
|
||||
};
|
||||
|
|
@ -0,0 +1,82 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include "meson-g12a.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,g12b";
|
||||
|
||||
cpus {
|
||||
cpu-map {
|
||||
cluster0 {
|
||||
core0 {
|
||||
cpu = <&cpu0>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&cpu1>;
|
||||
};
|
||||
};
|
||||
|
||||
cluster1 {
|
||||
core0 {
|
||||
cpu = <&cpu100>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&cpu101>;
|
||||
};
|
||||
|
||||
core2 {
|
||||
cpu = <&cpu102>;
|
||||
};
|
||||
|
||||
core3 {
|
||||
cpu = <&cpu103>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/delete-node/ cpu@2;
|
||||
/delete-node/ cpu@3;
|
||||
|
||||
cpu100: cpu@100 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a73";
|
||||
reg = <0x0 0x100>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu101: cpu@101 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a73";
|
||||
reg = <0x0 0x101>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu102: cpu@102 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a73";
|
||||
reg = <0x0 0x102>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu103: cpu@103 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a73";
|
||||
reg = <0x0 0x103>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&clkc {
|
||||
compatible = "amlogic,g12b-clkc";
|
||||
};
|
||||
|
|
@ -164,7 +164,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
@ -184,7 +184,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -486,7 +486,9 @@
|
|||
};
|
||||
|
||||
ethmac: ethernet@c9410000 {
|
||||
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
||||
compatible = "amlogic,meson-gxbb-dwmac",
|
||||
"snps,dwmac-3.70a",
|
||||
"snps,dwmac";
|
||||
reg = <0x0 0xc9410000 0x0 0x10000
|
||||
0x0 0xc8834540 0x0 0x4>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -154,10 +154,6 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -166,6 +162,11 @@
|
|||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
@ -273,7 +274,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
@ -301,8 +302,8 @@
|
|||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
max-frequency = <200000000>;
|
||||
sd-uhs-ddr50;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -162,10 +162,6 @@
|
|||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rmii";
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -174,6 +170,10 @@
|
|||
eth_phy0: ethernet-phy@0 {
|
||||
/* IC Plus IP101GR (0x02430c54) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <10000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -235,7 +235,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -126,10 +126,6 @@
|
|||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
mdio {
|
||||
|
|
@ -140,6 +136,11 @@
|
|||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
@ -255,6 +256,10 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-ddr50;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
|
|
@ -272,7 +277,7 @@
|
|||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
cap-mmc-highspeed;
|
||||
|
|
|
|||
|
|
@ -68,10 +68,6 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -80,6 +76,11 @@
|
|||
eth_phy0: ethernet-phy@3 {
|
||||
/* Micrel KSZ9031 (0x00221620) */
|
||||
reg = <3>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
|
|||
|
|
@ -165,7 +165,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
|
|||
|
|
@ -28,10 +28,10 @@
|
|||
};
|
||||
};
|
||||
|
||||
usb_vbus: regulator-usb0-vbus {
|
||||
usb_pwr: regulator-usb-pwrs {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB0_VBUS";
|
||||
regulator-name = "USB_PWR";
|
||||
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
|
@ -40,6 +40,27 @@
|
|||
enable-active-high;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
|
|
@ -47,13 +68,6 @@
|
|||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -66,15 +80,32 @@
|
|||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
|
||||
<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ao_cec_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rgmii_pins>;
|
||||
|
|
@ -85,10 +116,6 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -97,10 +124,30 @@
|
|||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
|
|
@ -115,10 +162,15 @@
|
|||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* Wireless SDIO Module */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -126,15 +178,15 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
|
|
@ -151,12 +203,13 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
|
|
@ -176,9 +229,22 @@
|
|||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vmmcq-sumpply = <&vcc_1v8>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* This is connected to the Bluetooth module: */
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This UART is brought out to the DB9 connector */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
|
|
@ -187,7 +253,7 @@
|
|||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
phy-supply = <&usb_vbus>;
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
|
|
|
|||
|
|
@ -59,6 +59,13 @@
|
|||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
|
|
@ -130,10 +137,6 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -142,6 +145,10 @@
|
|||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -172,6 +179,11 @@
|
|||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* Wireless SDIO Module */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
|
|
@ -183,7 +195,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
@ -208,7 +220,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -237,6 +249,19 @@
|
|||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* This is connected to the Bluetooth module: */
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This UART is brought out to the DB9 connector */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -381,10 +381,15 @@
|
|||
};
|
||||
|
||||
emmc_pins: emmc {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "emmc_nand_d07",
|
||||
"emmc_cmd",
|
||||
"emmc_clk";
|
||||
"emmc_cmd";
|
||||
function = "emmc";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "emmc_clk";
|
||||
function = "emmc";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
@ -394,7 +399,7 @@
|
|||
mux {
|
||||
groups = "emmc_ds";
|
||||
function = "emmc";
|
||||
bias-disable;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -436,13 +441,18 @@
|
|||
};
|
||||
|
||||
sdcard_pins: sdcard {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "sdcard_d0",
|
||||
"sdcard_d1",
|
||||
"sdcard_d2",
|
||||
"sdcard_d3",
|
||||
"sdcard_cmd",
|
||||
"sdcard_clk";
|
||||
"sdcard_cmd";
|
||||
function = "sdcard";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdcard_clk";
|
||||
function = "sdcard";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
@ -457,13 +467,18 @@
|
|||
};
|
||||
|
||||
sdio_pins: sdio {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "sdio_d0",
|
||||
"sdio_d1",
|
||||
"sdio_d2",
|
||||
"sdio_d3",
|
||||
"sdio_cmd",
|
||||
"sdio_clk";
|
||||
"sdio_cmd";
|
||||
function = "sdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdio_clk";
|
||||
function = "sdio";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -160,7 +160,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
|
|||
|
|
@ -70,20 +70,21 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
/* External PHY reset is shared with internal PHY Led signals */
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
/* External PHY reset is shared with internal PHY Led signal */
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
eee-broken-1000t;
|
||||
|
|
|
|||
|
|
@ -115,11 +115,13 @@
|
|||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
/* This is provided by LDOs on the eMMC daugther card */
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -235,7 +237,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -253,9 +255,9 @@
|
|||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-3_3v;
|
||||
max-frequency = <50000000>;
|
||||
non-removable;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
|
|
|
|||
|
|
@ -180,7 +180,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -114,7 +114,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
@ -134,7 +134,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -326,10 +326,15 @@
|
|||
};
|
||||
|
||||
emmc_pins: emmc {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "emmc_nand_d07",
|
||||
"emmc_cmd",
|
||||
"emmc_clk";
|
||||
"emmc_cmd";
|
||||
function = "emmc";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "emmc_clk";
|
||||
function = "emmc";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
@ -339,7 +344,7 @@
|
|||
mux {
|
||||
groups = "emmc_ds";
|
||||
function = "emmc";
|
||||
bias-disable;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -381,13 +386,18 @@
|
|||
};
|
||||
|
||||
sdcard_pins: sdcard {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "sdcard_d0",
|
||||
"sdcard_d1",
|
||||
"sdcard_d2",
|
||||
"sdcard_d3",
|
||||
"sdcard_cmd",
|
||||
"sdcard_clk";
|
||||
"sdcard_cmd";
|
||||
function = "sdcard";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdcard_clk";
|
||||
function = "sdcard";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
@ -402,13 +412,18 @@
|
|||
};
|
||||
|
||||
sdio_pins: sdio {
|
||||
mux {
|
||||
mux-0 {
|
||||
groups = "sdio_d0",
|
||||
"sdio_d1",
|
||||
"sdio_d2",
|
||||
"sdio_d3",
|
||||
"sdio_cmd",
|
||||
"sdio_clk";
|
||||
"sdio_cmd";
|
||||
function = "sdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdio_clk";
|
||||
function = "sdio";
|
||||
bias-disable;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -18,7 +18,6 @@
|
|||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
serial1 = &uart_A;
|
||||
serial2 = &uart_AO_B;
|
||||
};
|
||||
|
||||
|
|
@ -63,11 +62,9 @@
|
|||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button@0 {
|
||||
power-button {
|
||||
label = "power";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -242,11 +239,6 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
/* External PHY reset is shared with internal PHY Led signals */
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
phy-mode = "rgmii";
|
||||
|
||||
|
|
@ -257,6 +249,11 @@
|
|||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
@ -324,12 +321,13 @@
|
|||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
@ -349,11 +347,12 @@
|
|||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -366,17 +365,16 @@
|
|||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
|
|
@ -404,8 +402,14 @@
|
|||
/* This one is connected to the Bluetooth module */
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>;
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
|
||||
|
|
|
|||
|
|
@ -101,19 +101,19 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -144,7 +144,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -52,20 +52,21 @@
|
|||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
/* External PHY reset is shared with internal PHY Led signals */
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&external_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
/* External PHY reset is shared with internal PHY Led signal */
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
|
|
|||
|
|
@ -101,10 +101,6 @@
|
|||
/* Select external PHY by default */
|
||||
phy-handle = <&external_phy>;
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0 10000 1000000>;
|
||||
snps,reset-active-low;
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
/* External PHY is in RGMII */
|
||||
|
|
@ -113,9 +109,13 @@
|
|||
|
||||
&external_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -143,7 +143,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
|
@ -167,7 +167,7 @@
|
|||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -2734,8 +2734,8 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
|
|||
[CLKID_MALI_1_DIV] = &g12a_mali_1_div.hw,
|
||||
[CLKID_MALI_1] = &g12a_mali_1.hw,
|
||||
[CLKID_MALI] = &g12a_mali.hw,
|
||||
[CLKID_MPLL_5OM_DIV] = &g12a_mpll_50m_div.hw,
|
||||
[CLKID_MPLL_5OM] = &g12a_mpll_50m.hw,
|
||||
[CLKID_MPLL_50M_DIV] = &g12a_mpll_50m_div.hw,
|
||||
[CLKID_MPLL_50M] = &g12a_mpll_50m.hw,
|
||||
[CLKID_SYS_PLL_DIV16_EN] = &g12a_sys_pll_div16_en.hw,
|
||||
[CLKID_SYS_PLL_DIV16] = &g12a_sys_pll_div16.hw,
|
||||
[CLKID_CPU_CLK_DYN0_SEL] = &g12a_cpu_clk_premux0.hw,
|
||||
|
|
|
|||
|
|
@ -166,7 +166,7 @@
|
|||
#define CLKID_HDMI_DIV 167
|
||||
#define CLKID_MALI_0_DIV 170
|
||||
#define CLKID_MALI_1_DIV 173
|
||||
#define CLKID_MPLL_5OM_DIV 176
|
||||
#define CLKID_MPLL_50M_DIV 176
|
||||
#define CLKID_SYS_PLL_DIV16_EN 178
|
||||
#define CLKID_SYS_PLL_DIV16 179
|
||||
#define CLKID_CPU_CLK_DYN0_SEL 180
|
||||
|
|
|
|||
|
|
@ -1761,7 +1761,7 @@ static struct clk_regmap meson8m2_gp_pll = {
|
|||
},
|
||||
};
|
||||
|
||||
static const char * const mmeson8b_vpu_0_1_parent_names[] = {
|
||||
static const char * const meson8b_vpu_0_1_parent_names[] = {
|
||||
"fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7"
|
||||
};
|
||||
|
||||
|
|
@ -1778,8 +1778,8 @@ static struct clk_regmap meson8b_vpu_0_sel = {
|
|||
.hw.init = &(struct clk_init_data){
|
||||
.name = "vpu_0_sel",
|
||||
.ops = &clk_regmap_mux_ops,
|
||||
.parent_names = mmeson8b_vpu_0_1_parent_names,
|
||||
.num_parents = ARRAY_SIZE(mmeson8b_vpu_0_1_parent_names),
|
||||
.parent_names = meson8b_vpu_0_1_parent_names,
|
||||
.num_parents = ARRAY_SIZE(meson8b_vpu_0_1_parent_names),
|
||||
.flags = CLK_SET_RATE_PARENT,
|
||||
},
|
||||
};
|
||||
|
|
@ -1837,8 +1837,8 @@ static struct clk_regmap meson8b_vpu_1_sel = {
|
|||
.hw.init = &(struct clk_init_data){
|
||||
.name = "vpu_1_sel",
|
||||
.ops = &clk_regmap_mux_ops,
|
||||
.parent_names = mmeson8b_vpu_0_1_parent_names,
|
||||
.num_parents = ARRAY_SIZE(mmeson8b_vpu_0_1_parent_names),
|
||||
.parent_names = meson8b_vpu_0_1_parent_names,
|
||||
.num_parents = ARRAY_SIZE(meson8b_vpu_0_1_parent_names),
|
||||
.flags = CLK_SET_RATE_PARENT,
|
||||
},
|
||||
};
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@
|
|||
#define CLKID_MALI_1_SEL 172
|
||||
#define CLKID_MALI_1 174
|
||||
#define CLKID_MALI 175
|
||||
#define CLKID_MPLL_5OM 177
|
||||
#define CLKID_MPLL_50M 177
|
||||
#define CLKID_CPU_CLK 187
|
||||
#define CLKID_PCIE_PLL 201
|
||||
#define CLKID_VDEC_1 204
|
||||
|
|
|
|||
|
|
@ -0,0 +1,13 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef __DT_MESON_G12A_TOHDMITX_H
|
||||
#define __DT_MESON_G12A_TOHDMITX_H
|
||||
|
||||
#define TOHDMITX_I2S_IN_A 0
|
||||
#define TOHDMITX_I2S_IN_B 1
|
||||
#define TOHDMITX_I2S_IN_C 2
|
||||
#define TOHDMITX_I2S_OUT 3
|
||||
#define TOHDMITX_SPDIF_IN_A 4
|
||||
#define TOHDMITX_SPDIF_IN_B 5
|
||||
#define TOHDMITX_SPDIF_OUT 6
|
||||
|
||||
#endif /* __DT_MESON_G12A_TOHDMITX_H */
|
||||
Loading…
Reference in New Issue