diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index 1d508dcbf859..8586efff1e99 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -786,7 +786,6 @@ port address 0x1400. irqm:1 same as initial settings (assumed BIOS settings) irqm:2 always totem pole irqm:0x10 driver will not use IRQF_SHARED flag when requesting irq - irqm:0x20 driver will not use IRQF_DISABLED flag when requesting irq (Bits 0x10 and 0x20 can be combined with hardware irq mode option) @@ -1231,30 +1230,6 @@ they only refer to system buffers that are well aligned. So, a work around may only be needed under Linux when a scatter/gather list is not used and when the SCSI DATA IN phase is reentered after a phase mismatch. -14.5 IRQ sharing problems - -When an IRQ is shared by devices that are handled by different drivers, it -may happen that one driver complains about the request of the IRQ having -failed. Inder Linux-2.0, this may be due to one driver having requested the -IRQ using the IRQF_DISABLED flag but some other having requested the same IRQ -without this flag. Under both Linux-2.0 and linux-2.2, this may be caused by -one driver not having requested the IRQ with the IRQF_SHARED flag. - -By default, the ncr53c8xx and sym53c8xx drivers request IRQs with both the -IRQF_DISABLED and the IRQF_SHARED flag under Linux-2.0 and with only the IRQF_SHARED -flag under Linux-2.2. - -Under Linux-2.0, you can disable use of IRQF_DISABLED flag from the boot -command line by using the following option: - - ncr53c8xx=irqm:0x20 (for the generic ncr53c8xx driver) - sym53c8xx=irqm:0x20 (for the sym53c8xx driver) - -If this does not fix the problem, then you may want to check how all other -drivers are requesting the IRQ and report the problem. Note that if at least -a single driver does not request the IRQ with the IRQF_SHARED flag (share IRQ), -then the request of the IRQ obviously will not succeed for all the drivers. - 15. SCSI problem troubleshooting 15.1 Problem tracking diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index 0810132772a8..0e0322bf0020 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -107,10 +107,6 @@ produced errors and started to corrupt my disks. So don't do that! A 37.50 MHz PCI bus works for me, though, but I don't recommend using higher clocks than the 33.33 MHz being in the PCI spec. -If you want to share the IRQ with another device and the driver refuses to -do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to -IRQF_SHARED | IRQF_DISABLED. - 3.Features ---------- diff --git a/arch/mips/loongson/loongson-3/hpet.c b/arch/mips/loongson/loongson-3/hpet.c index e898d68668a9..5c21cd3bd339 100644 --- a/arch/mips/loongson/loongson-3/hpet.c +++ b/arch/mips/loongson/loongson-3/hpet.c @@ -162,7 +162,7 @@ static irqreturn_t hpet_irq_handler(int irq, void *data) static struct irqaction hpet_irq = { .handler = hpet_irq_handler, - .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .flags = IRQF_NOBALANCING | IRQF_TIMER, .name = "hpet", }; diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 2b9440384536..f749df9e15cd 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -405,8 +405,8 @@ static int cpqarray_register_ctlr(int i, struct pci_dev *pdev) goto Enomem4; } hba[i]->access.set_intr_mask(hba[i], 0); - if (request_irq(hba[i]->intr, do_ida_intr, - IRQF_DISABLED|IRQF_SHARED, hba[i]->devname, hba[i])) + if (request_irq(hba[i]->intr, do_ida_intr, IRQF_SHARED, + hba[i]->devname, hba[i])) { printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n", hba[i]->intr, hba[i]->devname); diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 029bc73de001..11f7982cbdb3 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -284,7 +284,7 @@ static int omap_l3_probe(struct platform_device *pdev) */ l3->debug_irq = platform_get_irq(pdev, 0); ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler, - IRQF_DISABLED, "l3-dbg-irq", l3); + 0x0, "l3-dbg-irq", l3); if (ret) { dev_err(l3->dev, "request_irq failed for %d\n", l3->debug_irq); @@ -293,7 +293,7 @@ static int omap_l3_probe(struct platform_device *pdev) l3->app_irq = platform_get_irq(pdev, 1); ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler, - IRQF_DISABLED, "l3-app-irq", l3); + 0x0, "l3-app-irq", l3); if (ret) dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq); diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c index 597fdaee7315..360a5c0a4ee0 100644 --- a/drivers/bus/omap_l3_smx.c +++ b/drivers/bus/omap_l3_smx.c @@ -251,18 +251,16 @@ static int omap3_l3_probe(struct platform_device *pdev) } l3->debug_irq = platform_get_irq(pdev, 0); - ret = request_irq(l3->debug_irq, omap3_l3_app_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "l3-debug-irq", l3); + ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING, + "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); goto err1; } l3->app_irq = platform_get_irq(pdev, 1); - ret = request_irq(l3->app_irq, omap3_l3_app_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "l3-app-irq", l3); + ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING, + "l3-app-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request app irq\n"); goto err2; diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c index 289ad3ac3e80..8dcc7b8fee40 100644 --- a/drivers/mtd/nand/hisi504_nand.c +++ b/drivers/mtd/nand/hisi504_nand.c @@ -758,8 +758,7 @@ static int hisi_nfc_probe(struct platform_device *pdev) hisi_nfc_host_init(host); - ret = devm_request_irq(dev, irq, hinfc_irq_handle, IRQF_DISABLED, - "nandc", host); + ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host); if (ret) { dev_err(dev, "failed to request IRQ\n"); goto err_res; diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c index b9827556455f..5c37f40f6122 100644 --- a/drivers/usb/isp1760/isp1760-core.c +++ b/drivers/usb/isp1760/isp1760-core.c @@ -151,8 +151,7 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags, } if (IS_ENABLED(CONFIG_USB_ISP1761_UDC) && !udc_disabled) { - ret = isp1760_udc_register(isp, irq, irqflags | IRQF_SHARED | - IRQF_DISABLED); + ret = isp1760_udc_register(isp, irq, irqflags | IRQF_SHARED); if (ret < 0) { isp1760_hcd_unregister(&isp->hcd); return ret; diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c index 9612d7990565..0b46ff01299f 100644 --- a/drivers/usb/isp1760/isp1760-udc.c +++ b/drivers/usb/isp1760/isp1760-udc.c @@ -1451,8 +1451,8 @@ int isp1760_udc_register(struct isp1760_device *isp, int irq, sprintf(udc->irqname, "%s (udc)", devname); - ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | IRQF_DISABLED | - irqflags, udc->irqname, udc); + ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | irqflags, + udc->irqname, udc); if (ret < 0) goto error; diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 3bb01b9a379c..2cee1761c77d 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -39,8 +39,6 @@ * These flags used only by the kernel as part of the * irq handling routines. * - * IRQF_DISABLED - keep irqs disabled when calling the action handler. - * DEPRECATED. This flag is a NOOP and scheduled to be removed * IRQF_SHARED - allow sharing the irq among several devices * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur * IRQF_TIMER - Flag to mark this interrupt as timer interrupt @@ -58,7 +56,6 @@ * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device * resume time. */ -#define IRQF_DISABLED 0x00000020 #define IRQF_SHARED 0x00000080 #define IRQF_PROBE_SHARED 0x00000100 #define __IRQF_TIMER 0x00000200