diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
index 69cae11d80a6..95536d83c5f2 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -6,7 +6,7 @@ Required properties:
    - "mediatek,mt7622-pwm": found on mt7622 SoC.
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
    - "mediatek,mt7628-pwm": found on mt7628 SoC.
-   - "mediatek,mt7629-pwm", "mediatek,mt7622-pwm": found on mt7629 SoC.
+   - "mediatek,mt7629-pwm": found on mt7629 SoC.
    - "mediatek,mt8516-pwm": found on mt8516 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
index 359b08596d9e..7ff48c14fae8 100644
--- a/drivers/pwm/pwm-stm32.c
+++ b/drivers/pwm/pwm-stm32.c
@@ -12,6 +12,7 @@
 #include <linux/mfd/stm32-timers.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 
@@ -19,6 +20,12 @@
 #define CCMR_CHANNEL_MASK  0xFF
 #define MAX_BREAKINPUT 2
 
+struct stm32_breakinput {
+	u32 index;
+	u32 level;
+	u32 filter;
+};
+
 struct stm32_pwm {
 	struct pwm_chip chip;
 	struct mutex lock; /* protect pwm config/enable */
@@ -26,15 +33,11 @@ struct stm32_pwm {
 	struct regmap *regmap;
 	u32 max_arr;
 	bool have_complementary_output;
+	struct stm32_breakinput breakinputs[MAX_BREAKINPUT];
+	unsigned int num_breakinputs;
 	u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */
 };
 
-struct stm32_breakinput {
-	u32 index;
-	u32 level;
-	u32 filter;
-};
-
 static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
 {
 	return container_of(chip, struct stm32_pwm, chip);
@@ -488,22 +491,19 @@ static const struct pwm_ops stm32pwm_ops = {
 };
 
 static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
-				    int index, int level, int filter)
+				    const struct stm32_breakinput *bi)
 {
-	u32 bke = (index == 0) ? TIM_BDTR_BKE : TIM_BDTR_BK2E;
-	int shift = (index == 0) ? TIM_BDTR_BKF_SHIFT : TIM_BDTR_BK2F_SHIFT;
-	u32 mask = (index == 0) ? TIM_BDTR_BKE | TIM_BDTR_BKP | TIM_BDTR_BKF
-				: TIM_BDTR_BK2E | TIM_BDTR_BK2P | TIM_BDTR_BK2F;
-	u32 bdtr = bke;
+	u32 shift = TIM_BDTR_BKF_SHIFT(bi->index);
+	u32 bke = TIM_BDTR_BKE(bi->index);
+	u32 bkp = TIM_BDTR_BKP(bi->index);
+	u32 bkf = TIM_BDTR_BKF(bi->index);
+	u32 mask = bkf | bkp | bke;
+	u32 bdtr;
 
-	/*
-	 * The both bits could be set since only one will be wrote
-	 * due to mask value.
-	 */
-	if (level)
-		bdtr |= TIM_BDTR_BKP | TIM_BDTR_BK2P;
+	bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke;
 
-	bdtr |= (filter & TIM_BDTR_BKF_MASK) << shift;
+	if (bi->level)
+		bdtr |= bkp;
 
 	regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
 
@@ -512,11 +512,25 @@ static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
 	return (bdtr & bke) ? 0 : -EINVAL;
 }
 
-static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
+static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < priv->num_breakinputs; i++) {
+		ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv,
 				       struct device_node *np)
 {
-	struct stm32_breakinput breakinput[MAX_BREAKINPUT];
-	int nb, ret, i, array_size;
+	int nb, ret, array_size;
+	unsigned int i;
 
 	nb = of_property_count_elems_of_size(np, "st,breakinput",
 					     sizeof(struct stm32_breakinput));
@@ -531,20 +545,21 @@ static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
 	if (nb > MAX_BREAKINPUT)
 		return -EINVAL;
 
+	priv->num_breakinputs = nb;
 	array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
 	ret = of_property_read_u32_array(np, "st,breakinput",
-					 (u32 *)breakinput, array_size);
+					 (u32 *)priv->breakinputs, array_size);
 	if (ret)
 		return ret;
 
-	for (i = 0; i < nb && !ret; i++) {
-		ret = stm32_pwm_set_breakinput(priv,
-					       breakinput[i].index,
-					       breakinput[i].level,
-					       breakinput[i].filter);
+	for (i = 0; i < priv->num_breakinputs; i++) {
+		if (priv->breakinputs[i].index > 1 ||
+		    priv->breakinputs[i].level > 1 ||
+		    priv->breakinputs[i].filter > 15)
+			return -EINVAL;
 	}
 
-	return ret;
+	return stm32_pwm_apply_breakinputs(priv);
 }
 
 static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
@@ -614,7 +629,7 @@ static int stm32_pwm_probe(struct platform_device *pdev)
 	if (!priv->regmap || !priv->clk)
 		return -EINVAL;
 
-	ret = stm32_pwm_apply_breakinputs(priv, np);
+	ret = stm32_pwm_probe_breakinputs(priv, np);
 	if (ret)
 		return ret;
 
@@ -647,6 +662,42 @@ static int stm32_pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused stm32_pwm_suspend(struct device *dev)
+{
+	struct stm32_pwm *priv = dev_get_drvdata(dev);
+	unsigned int i;
+	u32 ccer, mask;
+
+	/* Look for active channels */
+	ccer = active_channels(priv);
+
+	for (i = 0; i < priv->chip.npwm; i++) {
+		mask = TIM_CCER_CC1E << (i * 4);
+		if (ccer & mask) {
+			dev_err(dev, "PWM %u still in use by consumer %s\n",
+				i, priv->chip.pwms[i].label);
+			return -EBUSY;
+		}
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_resume(struct device *dev)
+{
+	struct stm32_pwm *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
+	/* restore breakinput registers that may have been lost in low power */
+	return stm32_pwm_apply_breakinputs(priv);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume);
+
 static const struct of_device_id stm32_pwm_of_match[] = {
 	{ .compatible = "st,stm32-pwm",	},
 	{ /* end node */ },
@@ -659,6 +710,7 @@ static struct platform_driver stm32_pwm_driver = {
 	.driver	= {
 		.name = "stm32-pwm",
 		.of_match_table = stm32_pwm_of_match,
+		.pm = &stm32_pwm_pm_ops,
 	},
 };
 module_platform_driver(stm32_pwm_driver);
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 6f5840a1a82d..581d23287333 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -137,10 +137,10 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
 
 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 }
 
@@ -156,7 +156,6 @@ static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
 	if (sun4i_pwm->data->has_prescaler_bypass) {
 		/* First, test without any prescaler when available */
 		prescaler = PWM_PRESCAL_MASK;
-		pval = 1;
 		/*
 		 * When not using any prescaler, the clock period in nanoseconds
 		 * is not an integer so round it half up instead of
diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
index 067d14655c28..f8db83aedb2b 100644
--- a/include/linux/mfd/stm32-timers.h
+++ b/include/linux/mfd/stm32-timers.h
@@ -70,14 +70,11 @@
 #define TIM_CCER_CC4E	BIT(12)	/* Capt/Comp 4  out Ena    */
 #define TIM_CCER_CC4P	BIT(13)	/* Capt/Comp 4  Polarity   */
 #define TIM_CCER_CCXE	(BIT(0) | BIT(4) | BIT(8) | BIT(12))
-#define TIM_BDTR_BKE	BIT(12) /* Break input enable	   */
-#define TIM_BDTR_BKP	BIT(13) /* Break input polarity	   */
+#define TIM_BDTR_BKE(x)	BIT(12 + (x) * 12) /* Break input enable */
+#define TIM_BDTR_BKP(x)	BIT(13 + (x) * 12) /* Break input polarity */
 #define TIM_BDTR_AOE	BIT(14)	/* Automatic Output Enable */
 #define TIM_BDTR_MOE	BIT(15)	/* Main Output Enable      */
-#define TIM_BDTR_BKF	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
-#define TIM_BDTR_BK2F	(BIT(20) | BIT(21) | BIT(22) | BIT(23))
-#define TIM_BDTR_BK2E	BIT(24) /* Break 2 input enable	   */
-#define TIM_BDTR_BK2P	BIT(25) /* Break 2 input polarity  */
+#define TIM_BDTR_BKF(x)	(0xf << (16 + (x) * 4))
 #define TIM_DCR_DBA	GENMASK(4, 0)	/* DMA base addr */
 #define TIM_DCR_DBL	GENMASK(12, 8)	/* DMA burst len */
 
@@ -87,8 +84,7 @@
 #define TIM_CR2_MMS2_SHIFT	20
 #define TIM_SMCR_TS_SHIFT	4
 #define TIM_BDTR_BKF_MASK	0xF
-#define TIM_BDTR_BKF_SHIFT	16
-#define TIM_BDTR_BK2F_SHIFT	20
+#define TIM_BDTR_BKF_SHIFT(x)	(16 + (x) * 4)
 
 enum stm32_timers_dmas {
 	STM32_TIMERS_DMA_CH1,
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index b2c9c460947d..0ef808d925bb 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -243,10 +243,7 @@ pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle,
  * @request: optional hook for requesting a PWM
  * @free: optional hook for freeing a PWM
  * @capture: capture and report PWM signal
- * @apply: atomically apply a new PWM config. The state argument
- *	   should be adjusted with the real hardware config (if the
- *	   approximate the period or duty_cycle value, state should
- *	   reflect it)
+ * @apply: atomically apply a new PWM config
  * @get_state: get the current PWM state. This function is only
  *	       called once per PWM device when the PWM chip is
  *	       registered.