diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 3cbf56ce66ea..2babe15b618d 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -42,8 +42,16 @@ Optional properties:
 - regulator-state-[mem/disk] node has following common properties:
 	- regulator-on-in-suspend: regulator should be on in suspend state.
 	- regulator-off-in-suspend: regulator should be off in suspend state.
-	- regulator-suspend-microvolt: regulator should be set to this voltage
-	  in suspend.
+	- regulator-suspend-min-microvolt: minimum voltage may be set in
+	  suspend state.
+	- regulator-suspend-max-microvolt: maximum voltage may be set in
+	  suspend state.
+	- regulator-suspend-microvolt: the default voltage which regulator
+	  would be set in suspend. This property is now deprecated, instead
+	  setting voltage for suspend mode via the API which regulator
+	  driver provides is recommended.
+	- regulator-changeable-in-suspend: whether the default voltage and
+	  the regulator on/off in suspend can be changed in runtime.
 	- regulator-mode: operating mode in the given suspend state.
 	  The set of possible operating modes depends on the capabilities of
 	  every hardware so the valid modes are documented on each regulator
diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt
new file mode 100644
index 000000000000..63dc07877cd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt
@@ -0,0 +1,43 @@
+Spreadtrum SC2731 Voltage regulators
+
+The SC2731 integrates low-voltage and low quiescent current DCDC/LDO.
+14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have
+their own bypass (power-down) control signals. External tantalum or MLCC
+ceramic capacitors are recommended to use with these LDOs.
+
+Required properties:
+ - compatible: should be "sprd,sc27xx-regulator".
+
+List of regulators provided by this controller. It is named according to
+its regulator type, BUCK_<name> and LDO_<name>. The definition for each
+of these nodes is defined using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+	BUCK_CPU0, BUCK_CPU1, BUCK_RF
+LDO:
+	LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE,
+	LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON,
+	LDO_CAMIO, LDO_SRAM
+
+Example:
+	regulators {
+		compatible = "sprd,sc27xx-regulator";
+
+		vddarm0: BUCK_CPU0 {
+			regulator-name = "vddarm0";
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1996875>;
+			regulator-ramp-delay = <25000>;
+			regulator-always-on;
+		};
+
+		vddcama0: LDO_CAMA0 {
+			regulator-name = "vddcama0";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3750000>;
+			regulator-enable-ramp-delay = <100>;
+		};
+		...
+	};
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index 757e3b53dc11..eff4dcaaa252 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -23,16 +23,12 @@ struct regulator_consumer_supply {
 e.g. for the machine above
 
 static struct regulator_consumer_supply regulator1_consumers[] = {
-{
-	.dev_name	= "dev_name(consumer B)",
-	.supply		= "Vcc",
-},};
+	REGULATOR_SUPPLY("Vcc", "consumer B"),
+};
 
 static struct regulator_consumer_supply regulator2_consumers[] = {
-{
-	.dev	= "dev_name(consumer A"),
-	.supply	= "Vcc",
-},};
+	REGULATOR_SUPPLY("Vcc", "consumer A"),
+};
 
 This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
 to the 'Vcc' supply for Consumer A.
@@ -78,20 +74,20 @@ static struct regulator_init_data regulator2_data = {
 Finally the regulator devices must be registered in the usual manner.
 
 static struct platform_device regulator_devices[] = {
-{
-	.name = "regulator",
-	.id = DCDC_1,
-	.dev = {
-		.platform_data = &regulator1_data,
+	{
+		.name = "regulator",
+		.id = DCDC_1,
+		.dev = {
+			.platform_data = &regulator1_data,
+		},
 	},
-},
-{
-	.name = "regulator",
-	.id = DCDC_2,
-	.dev = {
-		.platform_data = &regulator2_data,
+	{
+		.name = "regulator",
+		.id = DCDC_2,
+		.dev = {
+			.platform_data = &regulator2_data,
+		},
 	},
-},
 };
 /* register regulator 1 device */
 platform_device_register(&regulator_devices[0]);
diff --git a/MAINTAINERS b/MAINTAINERS
index 0b5249149695..d9da617b65c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14670,6 +14670,7 @@ W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
 S:	Supported
 F:	Documentation/devicetree/bindings/regulator/
+F:	Documentation/power/regulator/
 F:	drivers/regulator/
 F:	include/dt-bindings/regulator/
 F:	include/linux/regulator/
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 96cd55f9e3c5..b27417ca188a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -744,6 +744,13 @@ config REGULATOR_S5M8767
 	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
 	 supports DVS mode with 8bits of output voltage control.
 
+config REGULATOR_SC2731
+	tristate "Spreadtrum SC2731 power regulator driver"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	  This driver provides support for the voltage regulators on the
+	  SC2731 PMIC.
+
 config REGULATOR_SKY81452
 	tristate "Skyworks Solutions SKY81452 voltage regulator"
 	depends on MFD_SKY81452
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 80ffc57a9ca3..19fea09ba10a 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
+obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b64b7916507f..42681c10cbe4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -58,8 +58,6 @@ static bool has_full_constraints;
 
 static struct dentry *debugfs_root;
 
-static struct class regulator_class;
-
 /*
  * struct regulator_map
  *
@@ -112,11 +110,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 					  const char *supply_name);
 static void _regulator_put(struct regulator *regulator);
 
-static struct regulator_dev *dev_to_rdev(struct device *dev)
-{
-	return container_of(dev, struct regulator_dev, dev);
-}
-
 static const char *rdev_get_name(struct regulator_dev *rdev)
 {
 	if (rdev->constraints && rdev->constraints->name)
@@ -236,26 +229,35 @@ static int regulator_check_voltage(struct regulator_dev *rdev,
 	return 0;
 }
 
+/* return 0 if the state is valid */
+static int regulator_check_states(suspend_state_t state)
+{
+	return (state > PM_SUSPEND_MAX || state == PM_SUSPEND_TO_IDLE);
+}
+
 /* Make sure we select a voltage that suits the needs of all
  * regulator consumers
  */
 static int regulator_check_consumers(struct regulator_dev *rdev,
-				     int *min_uV, int *max_uV)
+				     int *min_uV, int *max_uV,
+				     suspend_state_t state)
 {
 	struct regulator *regulator;
+	struct regulator_voltage *voltage;
 
 	list_for_each_entry(regulator, &rdev->consumer_list, list) {
+		voltage = &regulator->voltage[state];
 		/*
 		 * Assume consumers that didn't say anything are OK
 		 * with anything in the constraint range.
 		 */
-		if (!regulator->min_uV && !regulator->max_uV)
+		if (!voltage->min_uV && !voltage->max_uV)
 			continue;
 
-		if (*max_uV > regulator->max_uV)
-			*max_uV = regulator->max_uV;
-		if (*min_uV < regulator->min_uV)
-			*min_uV = regulator->min_uV;
+		if (*max_uV > voltage->max_uV)
+			*max_uV = voltage->max_uV;
+		if (*min_uV < voltage->min_uV)
+			*min_uV = voltage->min_uV;
 	}
 
 	if (*min_uV > *max_uV) {
@@ -324,6 +326,24 @@ static int regulator_mode_constrain(struct regulator_dev *rdev,
 	return -EINVAL;
 }
 
+static inline struct regulator_state *
+regulator_get_suspend_state(struct regulator_dev *rdev, suspend_state_t state)
+{
+	if (rdev->constraints == NULL)
+		return NULL;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return &rdev->constraints->state_standby;
+	case PM_SUSPEND_MEM:
+		return &rdev->constraints->state_mem;
+	case PM_SUSPEND_MAX:
+		return &rdev->constraints->state_disk;
+	default:
+		return NULL;
+	}
+}
+
 static ssize_t regulator_uV_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -731,29 +751,32 @@ static int drms_uA_update(struct regulator_dev *rdev)
 }
 
 static int suspend_set_state(struct regulator_dev *rdev,
-	struct regulator_state *rstate)
+				    suspend_state_t state)
 {
 	int ret = 0;
+	struct regulator_state *rstate;
+
+	rstate = regulator_get_suspend_state(rdev, state);
+	if (rstate == NULL)
+		return -EINVAL;
 
 	/* If we have no suspend mode configration don't set anything;
 	 * only warn if the driver implements set_suspend_voltage or
 	 * set_suspend_mode callback.
 	 */
-	if (!rstate->enabled && !rstate->disabled) {
+	if (rstate->enabled != ENABLE_IN_SUSPEND &&
+	    rstate->enabled != DISABLE_IN_SUSPEND) {
 		if (rdev->desc->ops->set_suspend_voltage ||
 		    rdev->desc->ops->set_suspend_mode)
 			rdev_warn(rdev, "No configuration\n");
 		return 0;
 	}
 
-	if (rstate->enabled && rstate->disabled) {
-		rdev_err(rdev, "invalid configuration\n");
-		return -EINVAL;
-	}
-
-	if (rstate->enabled && rdev->desc->ops->set_suspend_enable)
+	if (rstate->enabled == ENABLE_IN_SUSPEND &&
+		rdev->desc->ops->set_suspend_enable)
 		ret = rdev->desc->ops->set_suspend_enable(rdev);
-	else if (rstate->disabled && rdev->desc->ops->set_suspend_disable)
+	else if (rstate->enabled == DISABLE_IN_SUSPEND &&
+		rdev->desc->ops->set_suspend_disable)
 		ret = rdev->desc->ops->set_suspend_disable(rdev);
 	else /* OK if set_suspend_enable or set_suspend_disable is NULL */
 		ret = 0;
@@ -778,30 +801,10 @@ static int suspend_set_state(struct regulator_dev *rdev,
 			return ret;
 		}
 	}
+
 	return ret;
 }
 
-/* locks held by caller */
-static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
-{
-	if (!rdev->constraints)
-		return -EINVAL;
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		return suspend_set_state(rdev,
-			&rdev->constraints->state_standby);
-	case PM_SUSPEND_MEM:
-		return suspend_set_state(rdev,
-			&rdev->constraints->state_mem);
-	case PM_SUSPEND_MAX:
-		return suspend_set_state(rdev,
-			&rdev->constraints->state_disk);
-	default:
-		return -EINVAL;
-	}
-}
-
 static void print_constraints(struct regulator_dev *rdev)
 {
 	struct regulation_constraints *constraints = rdev->constraints;
@@ -1068,7 +1071,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 
 	/* do we need to setup our suspend state */
 	if (rdev->constraints->initial_state) {
-		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
+		ret = suspend_set_state(rdev, rdev->constraints->initial_state);
 		if (ret < 0) {
 			rdev_err(rdev, "failed to set suspend state\n");
 			return ret;
@@ -1356,9 +1359,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 		debugfs_create_u32("uA_load", 0444, regulator->debugfs,
 				   &regulator->uA_load);
 		debugfs_create_u32("min_uV", 0444, regulator->debugfs,
-				   &regulator->min_uV);
+				   &regulator->voltage[PM_SUSPEND_ON].min_uV);
 		debugfs_create_u32("max_uV", 0444, regulator->debugfs,
-				   &regulator->max_uV);
+				   &regulator->voltage[PM_SUSPEND_ON].max_uV);
 		debugfs_create_file("constraint_flags", 0444,
 				    regulator->debugfs, regulator,
 				    &constraint_flags_fops);
@@ -1417,20 +1420,6 @@ static void regulator_supply_alias(struct device **dev, const char **supply)
 	}
 }
 
-static int of_node_match(struct device *dev, const void *data)
-{
-	return dev->of_node == data;
-}
-
-static struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
-{
-	struct device *dev;
-
-	dev = class_find_device(&regulator_class, NULL, np, of_node_match);
-
-	return dev ? dev_to_rdev(dev) : NULL;
-}
-
 static int regulator_match(struct device *dev, const void *data)
 {
 	struct regulator_dev *r = dev_to_rdev(dev);
@@ -2468,10 +2457,9 @@ static int _regulator_is_enabled(struct regulator_dev *rdev)
 	return rdev->desc->ops->is_enabled(rdev);
 }
 
-static int _regulator_list_voltage(struct regulator *regulator,
-				    unsigned selector, int lock)
+static int _regulator_list_voltage(struct regulator_dev *rdev,
+				   unsigned selector, int lock)
 {
-	struct regulator_dev *rdev = regulator->rdev;
 	const struct regulator_ops *ops = rdev->desc->ops;
 	int ret;
 
@@ -2487,7 +2475,8 @@ static int _regulator_list_voltage(struct regulator *regulator,
 		if (lock)
 			mutex_unlock(&rdev->mutex);
 	} else if (rdev->is_switch && rdev->supply) {
-		ret = _regulator_list_voltage(rdev->supply, selector, lock);
+		ret = _regulator_list_voltage(rdev->supply->rdev,
+					      selector, lock);
 	} else {
 		return -EINVAL;
 	}
@@ -2563,7 +2552,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages);
  */
 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
 {
-	return _regulator_list_voltage(regulator, selector, 1);
+	return _regulator_list_voltage(regulator->rdev, selector, 1);
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage);
 
@@ -2605,8 +2594,8 @@ int regulator_get_hardware_vsel_register(struct regulator *regulator,
 	if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
 		return -EOPNOTSUPP;
 
-	 *vsel_reg = rdev->desc->vsel_reg;
-	 *vsel_mask = rdev->desc->vsel_mask;
+	*vsel_reg = rdev->desc->vsel_reg;
+	*vsel_mask = rdev->desc->vsel_mask;
 
 	 return 0;
 }
@@ -2897,10 +2886,38 @@ out:
 	return ret;
 }
 
+static int _regulator_do_set_suspend_voltage(struct regulator_dev *rdev,
+				  int min_uV, int max_uV, suspend_state_t state)
+{
+	struct regulator_state *rstate;
+	int uV, sel;
+
+	rstate = regulator_get_suspend_state(rdev, state);
+	if (rstate == NULL)
+		return -EINVAL;
+
+	if (min_uV < rstate->min_uV)
+		min_uV = rstate->min_uV;
+	if (max_uV > rstate->max_uV)
+		max_uV = rstate->max_uV;
+
+	sel = regulator_map_voltage(rdev, min_uV, max_uV);
+	if (sel < 0)
+		return sel;
+
+	uV = rdev->desc->ops->list_voltage(rdev, sel);
+	if (uV >= min_uV && uV <= max_uV)
+		rstate->uV = uV;
+
+	return 0;
+}
+
 static int regulator_set_voltage_unlocked(struct regulator *regulator,
-					  int min_uV, int max_uV)
+					  int min_uV, int max_uV,
+					  suspend_state_t state)
 {
 	struct regulator_dev *rdev = regulator->rdev;
+	struct regulator_voltage *voltage = &regulator->voltage[state];
 	int ret = 0;
 	int old_min_uV, old_max_uV;
 	int current_uV;
@@ -2911,7 +2928,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 	 * should be a noop (some cpufreq implementations use the same
 	 * voltage for multiple frequencies, for example).
 	 */
-	if (regulator->min_uV == min_uV && regulator->max_uV == max_uV)
+	if (voltage->min_uV == min_uV && voltage->max_uV == max_uV)
 		goto out;
 
 	/* If we're trying to set a range that overlaps the current voltage,
@@ -2921,8 +2938,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 	if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
 		current_uV = _regulator_get_voltage(rdev);
 		if (min_uV <= current_uV && current_uV <= max_uV) {
-			regulator->min_uV = min_uV;
-			regulator->max_uV = max_uV;
+			voltage->min_uV = min_uV;
+			voltage->max_uV = max_uV;
 			goto out;
 		}
 	}
@@ -2940,12 +2957,12 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 		goto out;
 
 	/* restore original values in case of error */
-	old_min_uV = regulator->min_uV;
-	old_max_uV = regulator->max_uV;
-	regulator->min_uV = min_uV;
-	regulator->max_uV = max_uV;
+	old_min_uV = voltage->min_uV;
+	old_max_uV = voltage->max_uV;
+	voltage->min_uV = min_uV;
+	voltage->max_uV = max_uV;
 
-	ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
+	ret = regulator_check_consumers(rdev, &min_uV, &max_uV, state);
 	if (ret < 0)
 		goto out2;
 
@@ -2963,7 +2980,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 			goto out2;
 		}
 
-		best_supply_uV = _regulator_list_voltage(regulator, selector, 0);
+		best_supply_uV = _regulator_list_voltage(rdev, selector, 0);
 		if (best_supply_uV < 0) {
 			ret = best_supply_uV;
 			goto out2;
@@ -2982,7 +2999,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 
 	if (supply_change_uV > 0) {
 		ret = regulator_set_voltage_unlocked(rdev->supply,
-				best_supply_uV, INT_MAX);
+				best_supply_uV, INT_MAX, state);
 		if (ret) {
 			dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n",
 					ret);
@@ -2990,13 +3007,17 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 		}
 	}
 
-	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
+	if (state == PM_SUSPEND_ON)
+		ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
+	else
+		ret = _regulator_do_set_suspend_voltage(rdev, min_uV,
+							max_uV, state);
 	if (ret < 0)
 		goto out2;
 
 	if (supply_change_uV < 0) {
 		ret = regulator_set_voltage_unlocked(rdev->supply,
-				best_supply_uV, INT_MAX);
+				best_supply_uV, INT_MAX, state);
 		if (ret)
 			dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n",
 					ret);
@@ -3007,8 +3028,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 out:
 	return ret;
 out2:
-	regulator->min_uV = old_min_uV;
-	regulator->max_uV = old_max_uV;
+	voltage->min_uV = old_min_uV;
+	voltage->max_uV = old_max_uV;
 
 	return ret;
 }
@@ -3037,7 +3058,8 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 
 	regulator_lock_supply(regulator->rdev);
 
-	ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV);
+	ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV,
+					     PM_SUSPEND_ON);
 
 	regulator_unlock_supply(regulator->rdev);
 
@@ -3045,6 +3067,89 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage);
 
+static inline int regulator_suspend_toggle(struct regulator_dev *rdev,
+					   suspend_state_t state, bool en)
+{
+	struct regulator_state *rstate;
+
+	rstate = regulator_get_suspend_state(rdev, state);
+	if (rstate == NULL)
+		return -EINVAL;
+
+	if (!rstate->changeable)
+		return -EPERM;
+
+	rstate->enabled = en;
+
+	return 0;
+}
+
+int regulator_suspend_enable(struct regulator_dev *rdev,
+				    suspend_state_t state)
+{
+	return regulator_suspend_toggle(rdev, state, true);
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_enable);
+
+int regulator_suspend_disable(struct regulator_dev *rdev,
+				     suspend_state_t state)
+{
+	struct regulator *regulator;
+	struct regulator_voltage *voltage;
+
+	/*
+	 * if any consumer wants this regulator device keeping on in
+	 * suspend states, don't set it as disabled.
+	 */
+	list_for_each_entry(regulator, &rdev->consumer_list, list) {
+		voltage = &regulator->voltage[state];
+		if (voltage->min_uV || voltage->max_uV)
+			return 0;
+	}
+
+	return regulator_suspend_toggle(rdev, state, false);
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_disable);
+
+static int _regulator_set_suspend_voltage(struct regulator *regulator,
+					  int min_uV, int max_uV,
+					  suspend_state_t state)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	struct regulator_state *rstate;
+
+	rstate = regulator_get_suspend_state(rdev, state);
+	if (rstate == NULL)
+		return -EINVAL;
+
+	if (rstate->min_uV == rstate->max_uV) {
+		rdev_err(rdev, "The suspend voltage can't be changed!\n");
+		return -EPERM;
+	}
+
+	return regulator_set_voltage_unlocked(regulator, min_uV, max_uV, state);
+}
+
+int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV,
+				  int max_uV, suspend_state_t state)
+{
+	int ret = 0;
+
+	/* PM_SUSPEND_ON is handled by regulator_set_voltage() */
+	if (regulator_check_states(state) || state == PM_SUSPEND_ON)
+		return -EINVAL;
+
+	regulator_lock_supply(regulator->rdev);
+
+	ret = _regulator_set_suspend_voltage(regulator, min_uV,
+					     max_uV, state);
+
+	regulator_unlock_supply(regulator->rdev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_suspend_voltage);
+
 /**
  * regulator_set_voltage_time - get raise/fall time
  * @regulator: regulator source
@@ -3138,6 +3243,7 @@ EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
 int regulator_sync_voltage(struct regulator *regulator)
 {
 	struct regulator_dev *rdev = regulator->rdev;
+	struct regulator_voltage *voltage = &regulator->voltage[PM_SUSPEND_ON];
 	int ret, min_uV, max_uV;
 
 	mutex_lock(&rdev->mutex);
@@ -3149,20 +3255,20 @@ int regulator_sync_voltage(struct regulator *regulator)
 	}
 
 	/* This is only going to work if we've had a voltage configured. */
-	if (!regulator->min_uV && !regulator->max_uV) {
+	if (!voltage->min_uV && !voltage->max_uV) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	min_uV = regulator->min_uV;
-	max_uV = regulator->max_uV;
+	min_uV = voltage->min_uV;
+	max_uV = voltage->max_uV;
 
 	/* This should be a paranoia check... */
 	ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
 	if (ret < 0)
 		goto out;
 
-	ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
+	ret = regulator_check_consumers(rdev, &min_uV, &max_uV, 0);
 	if (ret < 0)
 		goto out;
 
@@ -3918,12 +4024,6 @@ static void regulator_dev_release(struct device *dev)
 	kfree(rdev);
 }
 
-static struct class regulator_class = {
-	.name = "regulator",
-	.dev_release = regulator_dev_release,
-	.dev_groups = regulator_dev_groups,
-};
-
 static void rdev_init_debugfs(struct regulator_dev *rdev)
 {
 	struct device *parent = rdev->dev.parent;
@@ -4174,81 +4274,86 @@ void regulator_unregister(struct regulator_dev *rdev)
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
 
-static int _regulator_suspend_prepare(struct device *dev, void *data)
+#ifdef CONFIG_SUSPEND
+static int _regulator_suspend_late(struct device *dev, void *data)
 {
 	struct regulator_dev *rdev = dev_to_rdev(dev);
-	const suspend_state_t *state = data;
+	suspend_state_t *state = data;
 	int ret;
 
 	mutex_lock(&rdev->mutex);
-	ret = suspend_prepare(rdev, *state);
+	ret = suspend_set_state(rdev, *state);
 	mutex_unlock(&rdev->mutex);
 
 	return ret;
 }
 
 /**
- * regulator_suspend_prepare - prepare regulators for system wide suspend
+ * regulator_suspend_late - prepare regulators for system wide suspend
  * @state: system suspend state
  *
  * Configure each regulator with it's suspend operating parameters for state.
- * This will usually be called by machine suspend code prior to supending.
  */
-int regulator_suspend_prepare(suspend_state_t state)
+static int regulator_suspend_late(struct device *dev)
 {
-	/* ON is handled by regulator active state */
-	if (state == PM_SUSPEND_ON)
-		return -EINVAL;
+	suspend_state_t state = pm_suspend_target_state;
 
 	return class_for_each_device(&regulator_class, NULL, &state,
-				     _regulator_suspend_prepare);
+				     _regulator_suspend_late);
 }
-EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
-
-static int _regulator_suspend_finish(struct device *dev, void *data)
+static int _regulator_resume_early(struct device *dev, void *data)
 {
+	int ret = 0;
 	struct regulator_dev *rdev = dev_to_rdev(dev);
-	int ret;
+	suspend_state_t *state = data;
+	struct regulator_state *rstate;
+
+	rstate = regulator_get_suspend_state(rdev, *state);
+	if (rstate == NULL)
+		return -EINVAL;
 
 	mutex_lock(&rdev->mutex);
-	if (rdev->use_count > 0  || rdev->constraints->always_on) {
-		if (!_regulator_is_enabled(rdev)) {
-			ret = _regulator_do_enable(rdev);
-			if (ret)
-				dev_err(dev,
-					"Failed to resume regulator %d\n",
-					ret);
-		}
-	} else {
-		if (!have_full_constraints())
-			goto unlock;
-		if (!_regulator_is_enabled(rdev))
-			goto unlock;
 
-		ret = _regulator_do_disable(rdev);
-		if (ret)
-			dev_err(dev, "Failed to suspend regulator %d\n", ret);
-	}
-unlock:
+	if (rdev->desc->ops->resume_early &&
+	    (rstate->enabled == ENABLE_IN_SUSPEND ||
+	     rstate->enabled == DISABLE_IN_SUSPEND))
+		ret = rdev->desc->ops->resume_early(rdev);
+
 	mutex_unlock(&rdev->mutex);
 
-	/* Keep processing regulators in spite of any errors */
-	return 0;
+	return ret;
 }
 
-/**
- * regulator_suspend_finish - resume regulators from system wide suspend
- *
- * Turn on regulators that might be turned off by regulator_suspend_prepare
- * and that should be turned on according to the regulators properties.
- */
-int regulator_suspend_finish(void)
+static int regulator_resume_early(struct device *dev)
 {
-	return class_for_each_device(&regulator_class, NULL, NULL,
-				     _regulator_suspend_finish);
-}
-EXPORT_SYMBOL_GPL(regulator_suspend_finish);
+	suspend_state_t state = pm_suspend_target_state;
 
+	return class_for_each_device(&regulator_class, NULL, &state,
+				     _regulator_resume_early);
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define regulator_suspend_late	NULL
+#define regulator_resume_early	NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops __maybe_unused regulator_pm_ops = {
+	.suspend_late	= regulator_suspend_late,
+	.resume_early	= regulator_resume_early,
+};
+#endif
+
+struct class regulator_class = {
+	.name = "regulator",
+	.dev_release = regulator_dev_release,
+	.dev_groups = regulator_dev_groups,
+#ifdef CONFIG_PM
+	.pm = &regulator_pm_ops,
+#endif
+};
 /**
  * regulator_has_full_constraints - the system has fully specified constraints
  *
@@ -4424,8 +4529,8 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 		switch (rdev->desc->type) {
 		case REGULATOR_VOLTAGE:
 			seq_printf(s, "%37dmV %5dmV",
-				   consumer->min_uV / 1000,
-				   consumer->max_uV / 1000);
+				   consumer->voltage[PM_SUSPEND_ON].min_uV / 1000,
+				   consumer->voltage[PM_SUSPEND_ON].max_uV / 1000);
 			break;
 		case REGULATOR_CURRENT:
 			break;
diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h
index 66a8ea0c8386..abfd56e8c78a 100644
--- a/drivers/regulator/internal.h
+++ b/drivers/regulator/internal.h
@@ -16,10 +16,25 @@
 #ifndef __REGULATOR_INTERNAL_H
 #define __REGULATOR_INTERNAL_H
 
+#include <linux/suspend.h>
+
+#define REGULATOR_STATES_NUM	(PM_SUSPEND_MAX + 1)
+
+struct regulator_voltage {
+	int min_uV;
+	int max_uV;
+};
+
 /*
  * struct regulator
  *
  * One for each consumer device.
+ * @voltage - a voltage array for each state of runtime, i.e.:
+ *            PM_SUSPEND_ON
+ *            PM_SUSPEND_TO_IDLE
+ *            PM_SUSPEND_STANDBY
+ *            PM_SUSPEND_MEM
+ *            PM_SUSPEND_MAX
  */
 struct regulator {
 	struct device *dev;
@@ -27,14 +42,22 @@ struct regulator {
 	unsigned int always_on:1;
 	unsigned int bypass:1;
 	int uA_load;
-	int min_uV;
-	int max_uV;
+	struct regulator_voltage voltage[REGULATOR_STATES_NUM];
 	const char *supply_name;
 	struct device_attribute dev_attr;
 	struct regulator_dev *rdev;
 	struct dentry *debugfs;
 };
 
+extern struct class regulator_class;
+
+static inline struct regulator_dev *dev_to_rdev(struct device *dev)
+{
+	return container_of(dev, struct regulator_dev, dev);
+}
+
+struct regulator_dev *of_find_regulator_by_node(struct device_node *np);
+
 #ifdef CONFIG_OF
 struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 			         const struct regulator_desc *desc,
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 14637a01ba2d..092ed6efb3ec 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -177,14 +177,30 @@ static void of_get_regulation_constraints(struct device_node *np,
 
 		if (of_property_read_bool(suspend_np,
 					"regulator-on-in-suspend"))
-			suspend_state->enabled = true;
+			suspend_state->enabled = ENABLE_IN_SUSPEND;
 		else if (of_property_read_bool(suspend_np,
 					"regulator-off-in-suspend"))
-			suspend_state->disabled = true;
+			suspend_state->enabled = DISABLE_IN_SUSPEND;
+		else
+			suspend_state->enabled = DO_NOTHING_IN_SUSPEND;
+
+		if (!of_property_read_u32(np, "regulator-suspend-min-microvolt",
+					  &pval))
+			suspend_state->min_uV = pval;
+
+		if (!of_property_read_u32(np, "regulator-suspend-max-microvolt",
+					  &pval))
+			suspend_state->max_uV = pval;
 
 		if (!of_property_read_u32(suspend_np,
 					"regulator-suspend-microvolt", &pval))
 			suspend_state->uV = pval;
+		else /* otherwise use min_uV as default suspend voltage */
+			suspend_state->uV = suspend_state->min_uV;
+
+		if (of_property_read_bool(suspend_np,
+					"regulator-changeable-in-suspend"))
+			suspend_state->changeable = true;
 
 		if (i == PM_SUSPEND_MEM)
 			constraints->initial_state = PM_SUSPEND_MEM;
@@ -376,3 +392,17 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 
 	return init_data;
 }
+
+static int of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(&regulator_class, NULL, np, of_node_match);
+
+	return dev ? dev_to_rdev(dev) : NULL;
+}
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 0241ada47d04..63c7a0c17777 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -486,24 +486,6 @@ static int spmi_vreg_update_bits(struct spmi_regulator *vreg, u16 addr, u8 val,
 	return regmap_update_bits(vreg->regmap, vreg->base + addr, mask, val);
 }
 
-static int spmi_regulator_common_is_enabled(struct regulator_dev *rdev)
-{
-	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
-	u8 reg;
-
-	spmi_vreg_read(vreg, SPMI_COMMON_REG_ENABLE, &reg, 1);
-
-	return (reg & SPMI_COMMON_ENABLE_MASK) == SPMI_COMMON_ENABLE;
-}
-
-static int spmi_regulator_common_enable(struct regulator_dev *rdev)
-{
-	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
-
-	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
-		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
-}
-
 static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
@@ -513,7 +495,7 @@ static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
 		vreg->vs_enable_time = ktime_get();
 	}
 
-	return spmi_regulator_common_enable(rdev);
+	return regulator_enable_regmap(rdev);
 }
 
 static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
@@ -524,14 +506,6 @@ static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
 	return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, &reg, 1);
 }
 
-static int spmi_regulator_common_disable(struct regulator_dev *rdev)
-{
-	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
-
-	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
-		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
-}
-
 static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
 					 int min_uV, int max_uV)
 {
@@ -1062,9 +1036,9 @@ static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
 }
 
 static struct regulator_ops spmi_smps_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_common_set_voltage,
 	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
 	.get_voltage_sel	= spmi_regulator_common_get_voltage,
@@ -1077,9 +1051,9 @@ static struct regulator_ops spmi_smps_ops = {
 };
 
 static struct regulator_ops spmi_ldo_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_common_set_voltage,
 	.get_voltage_sel	= spmi_regulator_common_get_voltage,
 	.map_voltage		= spmi_regulator_common_map_voltage,
@@ -1094,9 +1068,9 @@ static struct regulator_ops spmi_ldo_ops = {
 };
 
 static struct regulator_ops spmi_ln_ldo_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_common_set_voltage,
 	.get_voltage_sel	= spmi_regulator_common_get_voltage,
 	.map_voltage		= spmi_regulator_common_map_voltage,
@@ -1107,8 +1081,8 @@ static struct regulator_ops spmi_ln_ldo_ops = {
 
 static struct regulator_ops spmi_vs_ops = {
 	.enable			= spmi_regulator_vs_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 	.set_over_current_protection = spmi_regulator_vs_ocp,
@@ -1117,9 +1091,9 @@ static struct regulator_ops spmi_vs_ops = {
 };
 
 static struct regulator_ops spmi_boost_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_single_range_set_voltage,
 	.get_voltage_sel	= spmi_regulator_single_range_get_voltage,
 	.map_voltage		= spmi_regulator_single_map_voltage,
@@ -1128,9 +1102,9 @@ static struct regulator_ops spmi_boost_ops = {
 };
 
 static struct regulator_ops spmi_ftsmps_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_common_set_voltage,
 	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
 	.get_voltage_sel	= spmi_regulator_common_get_voltage,
@@ -1143,9 +1117,9 @@ static struct regulator_ops spmi_ftsmps_ops = {
 };
 
 static struct regulator_ops spmi_ult_lo_smps_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_ult_lo_smps_set_voltage,
 	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
 	.get_voltage_sel	= spmi_regulator_ult_lo_smps_get_voltage,
@@ -1157,9 +1131,9 @@ static struct regulator_ops spmi_ult_lo_smps_ops = {
 };
 
 static struct regulator_ops spmi_ult_ho_smps_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_single_range_set_voltage,
 	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
 	.get_voltage_sel	= spmi_regulator_single_range_get_voltage,
@@ -1172,9 +1146,9 @@ static struct regulator_ops spmi_ult_ho_smps_ops = {
 };
 
 static struct regulator_ops spmi_ult_ldo_ops = {
-	.enable			= spmi_regulator_common_enable,
-	.disable		= spmi_regulator_common_disable,
-	.is_enabled		= spmi_regulator_common_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.set_voltage_sel	= spmi_regulator_single_range_set_voltage,
 	.get_voltage_sel	= spmi_regulator_single_range_get_voltage,
 	.map_voltage		= spmi_regulator_single_map_voltage,
@@ -1711,6 +1685,9 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 		vreg->desc.id = -1;
 		vreg->desc.owner = THIS_MODULE;
 		vreg->desc.type = REGULATOR_VOLTAGE;
+		vreg->desc.enable_reg = reg->base + SPMI_COMMON_REG_ENABLE;
+		vreg->desc.enable_mask = SPMI_COMMON_ENABLE_MASK;
+		vreg->desc.enable_val = SPMI_COMMON_ENABLE;
 		vreg->desc.name = name = reg->name;
 		vreg->desc.supply_name = reg->supply;
 		vreg->desc.of_match = reg->name;
@@ -1723,6 +1700,7 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
 
 		config.dev = dev;
 		config.driver_data = vreg;
+		config.regmap = regmap;
 		rdev = devm_regulator_register(dev, &vreg->desc, &config);
 		if (IS_ERR(rdev)) {
 			dev_err(dev, "failed to register %s\n", name);
diff --git a/drivers/regulator/sc2731-regulator.c b/drivers/regulator/sc2731-regulator.c
new file mode 100644
index 000000000000..eb2bdf060b7b
--- /dev/null
+++ b/drivers/regulator/sc2731-regulator.c
@@ -0,0 +1,256 @@
+ //SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+/*
+ * SC2731 regulator lock register
+ */
+#define SC2731_PWR_WR_PROT		0xf0c
+#define SC2731_WR_UNLOCK_VALUE		0x6e7f
+
+/*
+ * SC2731 enable register
+ */
+#define SC2731_POWER_PD_SW		0xc28
+#define SC2731_LDO_CAMA0_PD		0xcfc
+#define SC2731_LDO_CAMA1_PD		0xd04
+#define SC2731_LDO_CAMMOT_PD		0xd0c
+#define SC2731_LDO_VLDO_PD		0xd6c
+#define SC2731_LDO_EMMCCORE_PD		0xd2c
+#define SC2731_LDO_SDCORE_PD		0xd74
+#define SC2731_LDO_SDIO_PD		0xd70
+#define SC2731_LDO_WIFIPA_PD		0xd4c
+#define SC2731_LDO_USB33_PD		0xd5c
+#define SC2731_LDO_CAMD0_PD		0xd7c
+#define SC2731_LDO_CAMD1_PD		0xd84
+#define SC2731_LDO_CON_PD		0xd8c
+#define SC2731_LDO_CAMIO_PD		0xd94
+#define SC2731_LDO_SRAM_PD		0xd78
+
+/*
+ * SC2731 enable mask
+ */
+#define SC2731_DCDC_CPU0_PD_MASK	BIT(4)
+#define SC2731_DCDC_CPU1_PD_MASK	BIT(3)
+#define SC2731_DCDC_RF_PD_MASK		BIT(11)
+#define SC2731_LDO_CAMA0_PD_MASK	BIT(0)
+#define SC2731_LDO_CAMA1_PD_MASK	BIT(0)
+#define SC2731_LDO_CAMMOT_PD_MASK	BIT(0)
+#define SC2731_LDO_VLDO_PD_MASK		BIT(0)
+#define SC2731_LDO_EMMCCORE_PD_MASK	BIT(0)
+#define SC2731_LDO_SDCORE_PD_MASK	BIT(0)
+#define SC2731_LDO_SDIO_PD_MASK		BIT(0)
+#define SC2731_LDO_WIFIPA_PD_MASK	BIT(0)
+#define SC2731_LDO_USB33_PD_MASK	BIT(0)
+#define SC2731_LDO_CAMD0_PD_MASK	BIT(0)
+#define SC2731_LDO_CAMD1_PD_MASK	BIT(0)
+#define SC2731_LDO_CON_PD_MASK		BIT(0)
+#define SC2731_LDO_CAMIO_PD_MASK	BIT(0)
+#define SC2731_LDO_SRAM_PD_MASK		BIT(0)
+
+/*
+ * SC2731 vsel register
+ */
+#define SC2731_DCDC_CPU0_VOL		0xc54
+#define SC2731_DCDC_CPU1_VOL		0xc64
+#define SC2731_DCDC_RF_VOL		0xcb8
+#define SC2731_LDO_CAMA0_VOL		0xd00
+#define SC2731_LDO_CAMA1_VOL		0xd08
+#define SC2731_LDO_CAMMOT_VOL		0xd10
+#define SC2731_LDO_VLDO_VOL		0xd28
+#define SC2731_LDO_EMMCCORE_VOL		0xd30
+#define SC2731_LDO_SDCORE_VOL		0xd38
+#define SC2731_LDO_SDIO_VOL		0xd40
+#define SC2731_LDO_WIFIPA_VOL		0xd50
+#define SC2731_LDO_USB33_VOL		0xd60
+#define SC2731_LDO_CAMD0_VOL		0xd80
+#define SC2731_LDO_CAMD1_VOL		0xd88
+#define SC2731_LDO_CON_VOL		0xd90
+#define SC2731_LDO_CAMIO_VOL		0xd98
+#define SC2731_LDO_SRAM_VOL		0xdB0
+
+/*
+ * SC2731 vsel register mask
+ */
+#define SC2731_DCDC_CPU0_VOL_MASK	GENMASK(8, 0)
+#define SC2731_DCDC_CPU1_VOL_MASK	GENMASK(8, 0)
+#define SC2731_DCDC_RF_VOL_MASK		GENMASK(8, 0)
+#define SC2731_LDO_CAMA0_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_CAMA1_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_CAMMOT_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_VLDO_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_EMMCCORE_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_SDCORE_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_SDIO_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_WIFIPA_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_USB33_VOL_MASK	GENMASK(7, 0)
+#define SC2731_LDO_CAMD0_VOL_MASK	GENMASK(6, 0)
+#define SC2731_LDO_CAMD1_VOL_MASK	GENMASK(6, 0)
+#define SC2731_LDO_CON_VOL_MASK		GENMASK(6, 0)
+#define SC2731_LDO_CAMIO_VOL_MASK	GENMASK(6, 0)
+#define SC2731_LDO_SRAM_VOL_MASK	GENMASK(6, 0)
+
+enum sc2731_regulator_id {
+	SC2731_BUCK_CPU0,
+	SC2731_BUCK_CPU1,
+	SC2731_BUCK_RF,
+	SC2731_LDO_CAMA0,
+	SC2731_LDO_CAMA1,
+	SC2731_LDO_CAMMOT,
+	SC2731_LDO_VLDO,
+	SC2731_LDO_EMMCCORE,
+	SC2731_LDO_SDCORE,
+	SC2731_LDO_SDIO,
+	SC2731_LDO_WIFIPA,
+	SC2731_LDO_USB33,
+	SC2731_LDO_CAMD0,
+	SC2731_LDO_CAMD1,
+	SC2731_LDO_CON,
+	SC2731_LDO_CAMIO,
+	SC2731_LDO_SRAM,
+};
+
+static const struct regulator_ops sc2731_regu_linear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+#define SC2731_REGU_LINEAR(_id, en_reg, en_mask, vreg, vmask,	\
+			  vstep, vmin, vmax) {			\
+	.name			= #_id,				\
+	.of_match		= of_match_ptr(#_id),		\
+	.ops			= &sc2731_regu_linear_ops,	\
+	.type			= REGULATOR_VOLTAGE,		\
+	.id			= SC2731_##_id,			\
+	.owner			= THIS_MODULE,			\
+	.min_uV			= vmin,				\
+	.n_voltages		= ((vmax) - (vmin)) / (vstep) + 1,	\
+	.uV_step		= vstep,			\
+	.enable_is_inverted	= true,				\
+	.enable_val		= 0,				\
+	.enable_reg		= en_reg,			\
+	.enable_mask		= en_mask,			\
+	.vsel_reg		= vreg,				\
+	.vsel_mask		= vmask,			\
+}
+
+static struct regulator_desc regulators[] = {
+	SC2731_REGU_LINEAR(BUCK_CPU0, SC2731_POWER_PD_SW,
+			   SC2731_DCDC_CPU0_PD_MASK, SC2731_DCDC_CPU0_VOL,
+			   SC2731_DCDC_CPU0_VOL_MASK, 3125, 400000, 1996875),
+	SC2731_REGU_LINEAR(BUCK_CPU1, SC2731_POWER_PD_SW,
+			   SC2731_DCDC_CPU1_PD_MASK, SC2731_DCDC_CPU1_VOL,
+			   SC2731_DCDC_CPU1_VOL_MASK, 3125, 400000, 1996875),
+	SC2731_REGU_LINEAR(BUCK_RF, SC2731_POWER_PD_SW, SC2731_DCDC_RF_PD_MASK,
+			   SC2731_DCDC_RF_VOL, SC2731_DCDC_RF_VOL_MASK,
+			   3125, 600000, 2196875),
+	SC2731_REGU_LINEAR(LDO_CAMA0, SC2731_LDO_CAMA0_PD,
+			   SC2731_LDO_CAMA0_PD_MASK, SC2731_LDO_CAMA0_VOL,
+			   SC2731_LDO_CAMA0_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_CAMA1, SC2731_LDO_CAMA1_PD,
+			   SC2731_LDO_CAMA1_PD_MASK, SC2731_LDO_CAMA1_VOL,
+			   SC2731_LDO_CAMA1_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_CAMMOT, SC2731_LDO_CAMMOT_PD,
+			   SC2731_LDO_CAMMOT_PD_MASK, SC2731_LDO_CAMMOT_VOL,
+			   SC2731_LDO_CAMMOT_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_VLDO, SC2731_LDO_VLDO_PD,
+			   SC2731_LDO_VLDO_PD_MASK, SC2731_LDO_VLDO_VOL,
+			   SC2731_LDO_VLDO_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_EMMCCORE, SC2731_LDO_EMMCCORE_PD,
+			   SC2731_LDO_EMMCCORE_PD_MASK, SC2731_LDO_EMMCCORE_VOL,
+			   SC2731_LDO_EMMCCORE_VOL_MASK, 10000, 1200000,
+			   3750000),
+	SC2731_REGU_LINEAR(LDO_SDCORE, SC2731_LDO_SDCORE_PD,
+			   SC2731_LDO_SDCORE_PD_MASK, SC2731_LDO_SDCORE_VOL,
+			   SC2731_LDO_SDCORE_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_SDIO, SC2731_LDO_SDIO_PD,
+			   SC2731_LDO_SDIO_PD_MASK, SC2731_LDO_SDIO_VOL,
+			   SC2731_LDO_SDIO_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_WIFIPA, SC2731_LDO_WIFIPA_PD,
+			   SC2731_LDO_WIFIPA_PD_MASK, SC2731_LDO_WIFIPA_VOL,
+			   SC2731_LDO_WIFIPA_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_USB33, SC2731_LDO_USB33_PD,
+			   SC2731_LDO_USB33_PD_MASK, SC2731_LDO_USB33_VOL,
+			   SC2731_LDO_USB33_VOL_MASK, 10000, 1200000, 3750000),
+	SC2731_REGU_LINEAR(LDO_CAMD0, SC2731_LDO_CAMD0_PD,
+			   SC2731_LDO_CAMD0_PD_MASK, SC2731_LDO_CAMD0_VOL,
+			   SC2731_LDO_CAMD0_VOL_MASK, 6250, 1000000, 1793750),
+	SC2731_REGU_LINEAR(LDO_CAMD1, SC2731_LDO_CAMD1_PD,
+			   SC2731_LDO_CAMD1_PD_MASK, SC2731_LDO_CAMD1_VOL,
+			   SC2731_LDO_CAMD1_VOL_MASK, 6250, 1000000, 1793750),
+	SC2731_REGU_LINEAR(LDO_CON, SC2731_LDO_CON_PD,
+			   SC2731_LDO_CON_PD_MASK, SC2731_LDO_CON_VOL,
+			   SC2731_LDO_CON_VOL_MASK, 6250, 1000000, 1793750),
+	SC2731_REGU_LINEAR(LDO_CAMIO, SC2731_LDO_CAMIO_PD,
+			   SC2731_LDO_CAMIO_PD_MASK, SC2731_LDO_CAMIO_VOL,
+			   SC2731_LDO_CAMIO_VOL_MASK, 6250, 1000000, 1793750),
+	SC2731_REGU_LINEAR(LDO_SRAM, SC2731_LDO_SRAM_PD,
+			   SC2731_LDO_SRAM_PD_MASK, SC2731_LDO_SRAM_VOL,
+			   SC2731_LDO_SRAM_VOL_MASK, 6250, 1000000, 1793750),
+};
+
+static int sc2731_regulator_unlock(struct regmap *regmap)
+{
+	return regmap_write(regmap, SC2731_PWR_WR_PROT,
+			    SC2731_WR_UNLOCK_VALUE);
+}
+
+static int sc2731_regulator_probe(struct platform_device *pdev)
+{
+	int i, ret;
+	struct regmap *regmap;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "failed to get regmap.\n");
+		return -ENODEV;
+	}
+
+	ret = sc2731_regulator_unlock(regmap);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to release regulator lock\n");
+		return ret;
+	}
+
+	config.dev = &pdev->dev;
+	config.regmap = regmap;
+
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		rdev = devm_regulator_register(&pdev->dev, &regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				regulators[i].name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver sc2731_regulator_driver = {
+	.driver = {
+		.name = "sc27xx-regulator",
+	},
+	.probe = sc2731_regulator_probe,
+};
+
+module_platform_driver(sc2731_regulator_driver);
+
+MODULE_AUTHOR("Chen Junhui <erick.chen@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum SC2731 regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index bc489958fed7..1827185beacc 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -28,9 +28,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/mfd/tps65218.h>
 
-enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
-			   DCDC5, DCDC6, LDO1, LS3 };
-
 #define TPS65218_REGULATOR(_name, _of, _id, _type, _ops, _n, _vr, _vm, _er, \
 			   _em, _cr, _cm, _lr, _nlr, _delay, _fuv, _sr, _sm) \
 	{							\
@@ -329,6 +326,8 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
 	/* Allocate memory for strobes */
 	tps->strobes = devm_kzalloc(&pdev->dev, sizeof(u8) *
 				    TPS65218_NUM_REGULATOR, GFP_KERNEL);
+	if (!tps->strobes)
+		return -ENOMEM;
 
 	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
 		rdev = devm_regulator_register(&pdev->dev, &regulators[i],
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 94417b4226bd..4c00486b7a78 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -214,6 +214,8 @@ struct regulator_ops {
 	/* set regulator suspend operating mode (defined in consumer.h) */
 	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
 
+	int (*resume_early)(struct regulator_dev *rdev);
+
 	int (*set_pull_down) (struct regulator_dev *);
 };
 
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 9cd4fef37203..93a04893c739 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -42,6 +42,16 @@ struct regulator;
 #define REGULATOR_CHANGE_DRMS		0x10
 #define REGULATOR_CHANGE_BYPASS		0x20
 
+/*
+ * operations in suspend mode
+ * DO_NOTHING_IN_SUSPEND - the default value
+ * DISABLE_IN_SUSPEND	- turn off regulator in suspend states
+ * ENABLE_IN_SUSPEND	- keep regulator on in suspend states
+ */
+#define DO_NOTHING_IN_SUSPEND	(-1)
+#define DISABLE_IN_SUSPEND	0
+#define ENABLE_IN_SUSPEND	1
+
 /* Regulator active discharge flags */
 enum regulator_active_discharge {
 	REGULATOR_ACTIVE_DISCHARGE_DEFAULT,
@@ -56,16 +66,24 @@ enum regulator_active_discharge {
  * state.  One of enabled or disabled must be set for the
  * configuration to be applied.
  *
- * @uV: Operating voltage during suspend.
+ * @uV: Default operating voltage during suspend, it can be adjusted
+ *	among <min_uV, max_uV>.
+ * @min_uV: Minimum suspend voltage may be set.
+ * @max_uV: Maximum suspend voltage may be set.
  * @mode: Operating mode during suspend.
- * @enabled: Enabled during suspend.
- * @disabled: Disabled during suspend.
+ * @enabled: operations during suspend.
+ *	     - DO_NOTHING_IN_SUSPEND
+ *	     - DISABLE_IN_SUSPEND
+ *	     - ENABLE_IN_SUSPEND
+ * @changeable: Is this state can be switched between enabled/disabled,
  */
 struct regulator_state {
-	int uV;	/* suspend voltage */
-	unsigned int mode; /* suspend regulator operating mode */
-	int enabled; /* is regulator enabled in this suspend state */
-	int disabled; /* is the regulator disabled in this suspend state */
+	int uV;
+	int min_uV;
+	int max_uV;
+	unsigned int mode;
+	int enabled;
+	bool changeable;
 };
 
 /**
@@ -225,12 +243,12 @@ struct regulator_init_data {
 
 #ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);
-int regulator_suspend_prepare(suspend_state_t state);
-int regulator_suspend_finish(void);
 #else
 static inline void regulator_has_full_constraints(void)
 {
 }
+#endif
+
 static inline int regulator_suspend_prepare(suspend_state_t state)
 {
 	return 0;
@@ -239,6 +257,5 @@ static inline int regulator_suspend_finish(void)
 {
 	return 0;
 }
-#endif
 
 #endif