redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25

hifive-unleashed-5.1
Paul Mackerras 2008-01-24 15:29:14 +11:00
parent 9156ad4833 96f39c1718
commit dcb571be20
106 changed files with 9537 additions and 702 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Documentation/powerpc/00-INDEX
View File

@ -28,3 +28,6 @@ sound.txt
- info on sound support under Linux/PPC
zImage_layout.txt
- info on the kernel images for Linux/PPC
qe_firmware.txt
- describes the layout of firmware binaries for the Freescale QUICC
Engine and the code that parses and uploads the microcode therein.

91
Documentation/powerpc/booting-without-of.txt
View File

@ -52,7 +52,11 @@ Table of Contents
i) Freescale QUICC Engine module (QE)
j) CFI or JEDEC memory-mapped NOR flash
k) Global Utilities Block
l) Xilinx IP cores
l) Freescale Communications Processor Module
m) Chipselect/Local Bus
n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
VII - Specifying interrupt information for devices
1) interrupts property
@ -1257,6 +1261,10 @@ platforms are moved over to use the flattened-device-tree model.
services interrupts for this device.
- phy-handle : The phandle for the PHY connected to this ethernet
controller.
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
but unique to the all specified fixed-links, b is duplex - 0 half,
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
Recommended properties:
@ -1411,7 +1419,6 @@ platforms are moved over to use the flattened-device-tree model.
Example multi port host USB controller device node :
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
@ -1425,7 +1432,6 @@ platforms are moved over to use the flattened-device-tree model.
Example dual role USB controller device node :
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
@ -1589,7 +1595,6 @@ platforms are moved over to use the flattened-device-tree model.
iii) USB (Universal Serial Bus Controller)
Required properties:
- device_type : should be "usb".
- compatible : could be "qe_udc" or "fhci-hcd".
- mode : the could be "host" or "slave".
- reg : Offset and length of the register set for the device
@ -1603,7 +1608,6 @@ platforms are moved over to use the flattened-device-tree model.
Example(slave):
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40>;
interrupts = <8b 0>;
@ -1616,7 +1620,7 @@ platforms are moved over to use the flattened-device-tree model.
Required properties:
- device_type : should be "network", "hldc", "uart", "transparent"
"bisync" or "atm".
"bisync", "atm", or "serial".
- compatible : could be "ucc_geth" or "fsl_atm" and so on.
- model : should be "UCC".
- device-id : the ucc number(1-8), corresponding to UCCx in UM.
@ -1629,6 +1633,13 @@ platforms are moved over to use the flattened-device-tree model.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- pio-handle : The phandle for the Parallel I/O port configuration.
- port-number : for UART drivers, the port number to use, between 0 and 3.
This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
The port number is added to the minor number of the device. Unlike the
CPM UART driver, the port-number is required for the QE UART driver.
- soft-uart : for UART drivers, if specified this means the QE UART device
driver should use "Soft-UART" mode, which is needed on some SOCs that have
broken UART hardware. Soft-UART is provided via a microcode upload.
- rx-clock-name: the UCC receive clock source
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
@ -1788,6 +1799,32 @@ platforms are moved over to use the flattened-device-tree model.
};
};
viii) Uploaded QE firmware
If a new firwmare has been uploaded to the QE (usually by the
boot loader), then a 'firmware' child node should be added to the QE
node. This node provides information on the uploaded firmware that
device drivers may need.
Required properties:
- id: The string name of the firmware. This is taken from the 'id'
member of the qe_firmware structure of the uploaded firmware.
Device drivers can search this string to determine if the
firmware they want is already present.
- extended-modes: The Extended Modes bitfield, taken from the
firmware binary. It is a 64-bit number represented
as an array of two 32-bit numbers.
- virtual-traps: The virtual traps, taken from the firmware binary.
It is an array of 8 32-bit numbers.
Example:
firmware {
id = "Soft-UART";
extended-modes = <0 0>;
virtual-traps = <0 0 0 0 0 0 0 0>;
}
j) CFI or JEDEC memory-mapped NOR flash
Flash chips (Memory Technology Devices) are often used for solid state
@ -2269,7 +2306,7 @@ platforms are moved over to use the flattened-device-tree model.
available.
For Axon: 0x0000012a
l) Xilinx IP cores
o) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
@ -2539,6 +2576,46 @@ platforms are moved over to use the flattened-device-tree model.
Requred properties:
- current-speed : Baud rate of uartlite
p) Freescale Synchronous Serial Interface
The SSI is a serial device that communicates with audio codecs. It can
be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties:
- compatible : compatible list, containing "fsl,ssi"
- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on
- reg : offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and
level information for the interrupt. This should be
encoded based on the information in section 2)
depending on the type of interrupt controller you
have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- fsl,mode : the operating mode for the SSI interface
"i2s-slave" - I2S mode, SSI is clock slave
"i2s-master" - I2S mode, SSI is clock master
"lj-slave" - left-justified mode, SSI is clock slave
"lj-master" - l.j. mode, SSI is clock master
"rj-slave" - right-justified mode, SSI is clock slave
"rj-master" - r.j., SSI is clock master
"ac97-slave" - AC97 mode, SSI is clock slave
"ac97-master" - AC97 mode, SSI is clock master
Optional properties:
- codec-handle : phandle to a 'codec' node that defines an audio
codec connected to this SSI. This node is typically
a child of an I2C or other control node.
Child 'codec' node required properties:
- compatible : compatible list, contains the name of the codec
Child 'codec' node optional properties:
- clock-frequency : The frequency of the input clock, which typically
comes from an on-board dedicated oscillator.
More devices will be defined as this spec matures.
VII - Specifying interrupt information for devices

295
Documentation/powerpc/qe_firmware.txt 100644
View File

@ -0,0 +1,295 @@
Freescale QUICC Engine Firmware Uploading
-----------------------------------------
(c) 2007 Timur Tabi <timur at freescale.com>,
Freescale Semiconductor
Table of Contents
=================
I - Software License for Firmware
II - Microcode Availability
III - Description and Terminology
IV - Microcode Programming Details
V - Firmware Structure Layout
VI - Sample Code for Creating Firmware Files
Revision Information
====================
November 30, 2007: Rev 1.0 - Initial version
I - Software License for Firmware
=================================
Each firmware file comes with its own software license. For information on
the particular license, please see the license text that is distributed with
the firmware.
II - Microcode Availability
===========================
Firmware files are distributed through various channels. Some are available on
http://opensource.freescale.com. For other firmware files, please contact
your Freescale representative or your operating system vendor.
III - Description and Terminology
================================
In this document, the term 'microcode' refers to the sequence of 32-bit
integers that compose the actual QE microcode.
The term 'firmware' refers to a binary blob that contains the microcode as
well as other data that
1) describes the microcode's purpose
2) describes how and where to upload the microcode
3) specifies the values of various registers
4) includes additional data for use by specific device drivers
Firmware files are binary files that contain only a firmware.
IV - Microcode Programming Details
===================================
The QE architecture allows for only one microcode present in I-RAM for each
RISC processor. To replace any current microcode, a full QE reset (which
disables the microcode) must be performed first.
QE microcode is uploaded using the following procedure:
1) The microcode is placed into I-RAM at a specific location, using the
IRAM.IADD and IRAM.IDATA registers.
2) The CERCR.CIR bit is set to 0 or 1, depending on whether the firmware
needs split I-RAM. Split I-RAM is only meaningful for SOCs that have
QEs with multiple RISC processors, such as the 8360. Splitting the I-RAM
allows each processor to run a different microcode, effectively creating an
asymmetric multiprocessing (AMP) system.
3) The TIBCR trap registers are loaded with the addresses of the trap handlers
in the microcode.
4) The RSP.ECCR register is programmed with the value provided.
5) If necessary, device drivers that need the virtual traps and extended mode
data will use them.
Virtual Microcode Traps
These virtual traps are conditional branches in the microcode. These are
"soft" provisional introduced in the ROMcode in order to enable higher
flexibility and save h/w traps If new features are activated or an issue is
being fixed in the RAM package utilizing they should be activated. This data
structure signals the microcode which of these virtual traps is active.
This structure contains 6 words that the application should copy to some
specific been defined. This table describes the structure.
---------------------------------------------------------------
| Offset in | | Destination Offset | Size of |
| array | Protocol | within PRAM | Operand |
--------------------------------------------------------------|
| 0 | Ethernet | 0xF8 | 4 bytes |
| | interworking | | |
---------------------------------------------------------------
| 4 | ATM | 0xF8 | 4 bytes |
| | interworking | | |
---------------------------------------------------------------
| 8 | PPP | 0xF8 | 4 bytes |
| | interworking | | |
---------------------------------------------------------------
| 12 | Ethernet RX | 0x22 | 1 byte |
| | Distributor Page | | |
---------------------------------------------------------------
| 16 | ATM Globtal | 0x28 | 1 byte |
| | Params Table | | |
---------------------------------------------------------------
| 20 | Insert Frame | 0xF8 | 4 bytes |
---------------------------------------------------------------
Extended Modes
This is a double word bit array (64 bits) that defines special functionality
which has an impact on the softwarew drivers. Each bit has its own impact
and has special instructions for the s/w associated with it. This structure is
described in this table:
-----------------------------------------------------------------------
| Bit # | Name | Description |
-----------------------------------------------------------------------
| 0 | General | Indicates that prior to each host command |
| | push command | given by the application, the software must |
| | | assert a special host command (push command)|
| | | CECDR = 0x00800000. |
| | | CECR = 0x01c1000f. |
-----------------------------------------------------------------------
| 1 | UCC ATM | Indicates that after issuing ATM RX INIT |
| | RX INIT | command, the host must issue another special|
| | push command | command (push command) and immediately |
| | | following that re-issue the ATM RX INIT |
| | | command. (This makes the sequence of |
| | | initializing the ATM receiver a sequence of |
| | | three host commands) |
| | | CECDR = 0x00800000. |
| | | CECR = 0x01c1000f. |
-----------------------------------------------------------------------
| 2 | Add/remove | Indicates that following the specific host |
| | command | command: "Add/Remove entry in Hash Lookup |
| | validation | Table" used in Interworking setup, the user |
| | | must issue another command. |
| | | CECDR = 0xce000003. |
| | | CECR = 0x01c10f58. |
-----------------------------------------------------------------------
| 3 | General push | Indicates that the s/w has to initialize |
| | command | some pointers in the Ethernet thread pages |
| | | which are used when Header Compression is |
| | | activated. The full details of these |
| | | pointers is located in the software drivers.|
-----------------------------------------------------------------------
| 4 | General push | Indicates that after issuing Ethernet TX |
| | command | INIT command, user must issue this command |
| | | for each SNUM of Ethernet TX thread. |
| | | CECDR = 0x00800003. |
| | | CECR = 0x7'b{0}, 8'b{Enet TX thread SNUM}, |
| | | 1'b{1}, 12'b{0}, 4'b{1} |
-----------------------------------------------------------------------
| 5 - 31 | N/A | Reserved, set to zero. |
-----------------------------------------------------------------------
V - Firmware Structure Layout
==============================
QE microcode from Freescale is typically provided as a header file. This
header file contains macros that define the microcode binary itself as well as
some other data used in uploading that microcode. The format of these files
do not lend themselves to simple inclusion into other code. Hence,
the need for a more portable format. This section defines that format.
Instead of distributing a header file, the microcode and related data are
embedded into a binary blob. This blob is passed to the qe_upload_firmware()
function, which parses the blob and performs everything necessary to upload
the microcode.
All integers are big-endian. See the comments for function
qe_upload_firmware() for up-to-date implementation information.
This structure supports versioning, where the version of the structure is
embedded into the structure itself. To ensure forward and backwards
compatibility, all versions of the structure must use the same 'qe_header'
structure at the beginning.
'header' (type: struct qe_header):
The 'length' field is the size, in bytes, of the entire structure,
including all the microcode embedded in it, as well as the CRC (if
present).
The 'magic' field is an array of three bytes that contains the letters
'Q', 'E', and 'F'. This is an identifier that indicates that this
structure is a QE Firmware structure.
The 'version' field is a single byte that indicates the version of this
structure. If the layout of the structure should ever need to be
changed to add support for additional types of microcode, then the
version number should also be changed.
The 'id' field is a null-terminated string(suitable for printing) that
identifies the firmware.
The 'count' field indicates the number of 'microcode' structures. There
must be one and only one 'microcode' structure for each RISC processor.
Therefore, this field also represents the number of RISC processors for this
SOC.
The 'soc' structure contains the SOC numbers and revisions used to match
the microcode to the SOC itself. Normally, the microcode loader should
check the data in this structure with the SOC number and revisions, and
only upload the microcode if there's a match. However, this check is not
made on all platforms.
Although it is not recommended, you can specify '0' in the soc.model
field to skip matching SOCs altogether.
The 'model' field is a 16-bit number that matches the actual SOC. The
'major' and 'minor' fields are the major and minor revision numbrs,
respectively, of the SOC.
For example, to match the 8323, revision 1.0:
soc.model = 8323
soc.major = 1
soc.minor = 0
'padding' is neccessary for structure alignment. This field ensures that the
'extended_modes' field is aligned on a 64-bit boundary.
'extended_modes' is a bitfield that defines special functionality which has an
impact on the device drivers. Each bit has its own impact and has special
instructions for the driver associated with it. This field is stored in
the QE library and available to any driver that calles qe_get_firmware_info().
'vtraps' is an array of 8 words that contain virtual trap values for each
virtual traps. As with 'extended_modes', this field is stored in the QE
library and available to any driver that calles qe_get_firmware_info().
'microcode' (type: struct qe_microcode):
For each RISC processor there is one 'microcode' structure. The first
'microcode' structure is for the first RISC, and so on.
The 'id' field is a null-terminated string suitable for printing that
identifies this particular microcode.
'traps' is an array of 16 words that contain hardware trap values
for each of the 16 traps. If trap[i] is 0, then this particular
trap is to be ignored (i.e. not written to TIBCR[i]). The entire value
is written as-is to the TIBCR[i] register, so be sure to set the EN
and T_IBP bits if necessary.
'eccr' is the value to program into the ECCR register.
'iram_offset' is the offset into IRAM to start writing the
microcode.
'count' is the number of 32-bit words in the microcode.
'code_offset' is the offset, in bytes, from the beginning of this
structure where the microcode itself can be found. The first
microcode binary should be located immediately after the 'microcode'
array.
'major', 'minor', and 'revision' are the major, minor, and revision
version numbers, respectively, of the microcode. If all values are 0,
then these fields are ignored.
'reserved' is necessary for structure alignment. Since 'microcode'
is an array, the 64-bit 'extended_modes' field needs to be aligned
on a 64-bit boundary, and this can only happen if the size of
'microcode' is a multiple of 8 bytes. To ensure that, we add
'reserved'.
After the last microcode is a 32-bit CRC. It can be calculated using
this algorithm:
u32 crc32(const u8 *p, unsigned int len)
{
unsigned int i;
u32 crc = 0;
while (len--) {
crc ^= *p++;
for (i = 0; i < 8; i++)
crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
}
return crc;
}
VI - Sample Code for Creating Firmware Files
============================================
A Python program that creates firmware binaries from the header files normally
distributed by Freescale can be found on http://opensource.freescale.com.

3
arch/powerpc/Kconfig
View File

@ -140,6 +140,9 @@ config DEFAULT_UIMAGE
Used to allow a board to specify it wants a uImage built by default
default n
config REDBOOT
bool
config PPC64_SWSUSP
bool
depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))

1
arch/powerpc/boot/.gitignore vendored
View File

@ -31,6 +31,7 @@ zImage.*lds
zImage.miboot
zImage.pmac
zImage.pseries
zImage.redboot*
zImage.sandpoint
zImage.vmode
zconf.h

10
arch/powerpc/boot/Makefile
View File

@ -57,12 +57,12 @@ src-wlib := string.S crt0.S stdio.c main.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
fsl-soc.c mpc8xx.c pq2.c
src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
cuboot-katmai.c cuboot-rainier.c
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@ -195,7 +195,9 @@ image-$(CONFIG_PPC_8xx) += cuImage.8xx
image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc
image-$(CONFIG_EP405) += zImage.ep405
image-$(CONFIG_8260) += cuImage.pq2
image-$(CONFIG_EP8248E) += zImage.ep8248e
image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx
image-$(CONFIG_STORCENTER) += cuImage.824x
image-$(CONFIG_PPC_83xx) += cuImage.83xx
image-$(CONFIG_PPC_85xx) += cuImage.85xx
image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2
@ -208,6 +210,10 @@ image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
endif
ifneq ($(CONFIG_REDBOOT),"")
image-$(CONFIG_PPC_8xx) += zImage.redboot-8xx
endif
# For 32-bit powermacs, build the COFF and miboot images
# as well as the ELF images.
ifeq ($(CONFIG_PPC32),y)

53
arch/powerpc/boot/cuboot-824x.c 100644
View File

@ -0,0 +1,53 @@
/*
* Old U-boot compatibility for 824x
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "ops.h"
#include "stdio.h"
#include "cuboot.h"
#define TARGET_824x
#include "ppcboot.h"
static bd_t bd;
static void platform_fixups(void)
{
void *soc;
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_addresses(bd.bi_enetaddr);
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
soc = find_node_by_devtype(NULL, "soc");
if (soc) {
void *serial = NULL;
setprop(soc, "bus-frequency", &bd.bi_busfreq,
sizeof(bd.bi_busfreq));
while ((serial = find_node_by_devtype(serial, "serial"))) {
if (get_parent(serial) != soc)
continue;
setprop(serial, "clock-frequency", &bd.bi_busfreq,
sizeof(bd.bi_busfreq));
}
}
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
CUBOOT_INIT();
fdt_init(_dtb_start);
serial_console_init();
platform_ops.fixups = platform_fixups;
}

3
arch/powerpc/boot/cuboot-83xx.c
View File

@ -24,7 +24,8 @@ static void platform_fixups(void)
void *soc;
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
/* Unfortunately, the specific model number is encoded in the

5
arch/powerpc/boot/cuboot-85xx.c
View File

@ -24,8 +24,9 @@ static void platform_fixups(void)
void *soc;
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr,
bd.bi_enet2addr);
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
/* Unfortunately, the specific model number is encoded in the

14
arch/powerpc/boot/devtree.c
View File

@ -88,6 +88,20 @@ void dt_fixup_clock(const char *path, u32 freq)
}
}
void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr)
{
void *devp = find_node_by_alias(alias);
if (devp) {
printf("%s: local-mac-address <-"
" %02x:%02x:%02x:%02x:%02x:%02x\n\r", alias,
addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]);
setprop(devp, "local-mac-address", addr, 6);
}
}
void dt_fixup_mac_address(u32 index, const u8 *addr)
{
void *devp = find_node_by_prop_value(NULL, "linux,network-index",

184
arch/powerpc/boot/dts/adder875-redboot.dts 100644
View File

@ -0,0 +1,184 @@
/*
* Device Tree Source for MPC885 ADS running RedBoot
*
* Copyright 2006 MontaVista Software, Inc.
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "Analogue & Micro Adder MPC875";
compatible = "analogue-and-micro,adder875";
#address-cells = <1>;
#size-cells = <1>;
aliases {
console = &console;
ethernet0 = &eth0;
ethernet1 = &eth1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,875@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <16>;
i-cache-line-size = <16>;
d-cache-size = <8192>;
i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <0 0x01000000>;
};
localbus@fa200100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
"simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xfa200100 0x40>;
ranges = <
0 0 0xfe000000 0x00800000
2 0 0xfa100000 0x00008000
>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x800000>;
bank-width = <2>;
device-width = <2>;
};
};
soc@fa200000 {
compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xfa200000 0x00004000>;
// Temporary until code stops depending on it.
device_type = "soc";
// Temporary until get_immrbase() is fixed.
reg = <0xfa200000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
};
eth0: ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc875-fec-enet",
"fsl,pq1-fec-enet";
reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
};
eth1: ethernet@1e00 {
device_type = "network";
compatible = "fsl,mpc875-fec-enet",
"fsl,pq1-fec-enet";
reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
};
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x24>;
compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
reg = <0x9c0 0x40>;
ranges;
muram {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 0x1c00>;
};
};
brg@9f0 {
compatible = "fsl,mpc875-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
interrupt-controller;
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <0x930 0x20>;
compatible = "fsl,mpc875-cpm-pic",
"fsl,cpm1-pic";
};
console: serial@a80 {
device_type = "serial";
compatible = "fsl,mpc875-smc-uart",
"fsl,cpm1-smc-uart";
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x0090>;
current-speed = <115200>;
};
};
};
chosen {
linux,stdout-path = &console;
};
};

183
arch/powerpc/boot/dts/adder875-uboot.dts 100644
View File

@ -0,0 +1,183 @@
/*
* Device Tree Source for MPC885 ADS running U-Boot
*
* Copyright 2006 MontaVista Software, Inc.
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "Analogue & Micro Adder MPC875";
compatible = "analogue-and-micro,adder875";
#address-cells = <1>;
#size-cells = <1>;
aliases {
console = &console;
ethernet0 = &eth0;
ethernet1 = &eth1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,875@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <16>;
i-cache-line-size = <16>;
d-cache-size = <8192>;
i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <0 0x01000000>;
};
localbus@ff000100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
"simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xff000100 0x40>;
ranges = <
0 0 0xfe000000 0x01000000
>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x800000>;
bank-width = <2>;
device-width = <2>;
};
};
soc@ff000000 {
compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xff000000 0x00004000>;
// Temporary until code stops depending on it.
device_type = "soc";
// Temporary until get_immrbase() is fixed.
reg = <0xff000000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
};
eth0: ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc875-fec-enet",
"fsl,pq1-fec-enet";
reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
};
eth1: ethernet@1e00 {
device_type = "network";
compatible = "fsl,mpc875-fec-enet",
"fsl,pq1-fec-enet";
reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
};
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x24>;
compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
reg = <0x9c0 0x40>;
ranges;
muram {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 0x1c00>;
};
};
brg@9f0 {
compatible = "fsl,mpc875-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
interrupt-controller;
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <0x930 0x20>;
compatible = "fsl,mpc875-cpm-pic",
"fsl,cpm1-pic";
};
console: serial@a80 {
device_type = "serial";
compatible = "fsl,mpc875-smc-uart",
"fsl,cpm1-smc-uart";
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x0090>;
current-speed = <115200>;
};
};
};
chosen {
linux,stdout-path = &console;
};
};

207
arch/powerpc/boot/dts/ep8248e.dts 100644
View File

@ -0,0 +1,207 @@
/*
* Device Tree for the Embedded Planet EP8248E board running PlanetCore.
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "EP8248E";
compatible = "fsl,ep8248e";
#address-cells = <1>;
#size-cells = <1>;
aliases {
planetcore-SMC1 = &smc1;
planetcore-SCC1 = &scc1;
ethernet0 = &eth0;
ethernet1 = &eth1;
serial0 = &smc1;
serial1 = &scc1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8248@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>;
clock-frequency = <0>;
};
};
localbus@f0010100 {
compatible = "fsl,mpc8248-localbus",
"fsl,pq2-localbus",
"simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xf0010100 0x40>;
ranges = <0 0 0xfc000000 0x04000000
1 0 0xfa000000 0x00008000>;
flash@0,3800000 {
compatible = "cfi-flash";
reg = <0 0x3800000 0x800000>;
bank-width = <4>;
device-width = <2>;
};
bcsr@1,0 {
#address-cells = <2>;
#size-cells = <1>;
reg = <1 0 0x10>;
compatible = "fsl,ep8248e-bcsr";
ranges;
mdio {
device_type = "mdio";
compatible = "fsl,ep8248e-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
reg = <1 8 1>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
reg = <0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
reg = <1>;
device_type = "ethernet-phy";
};
};
};
};
memory {
device_type = "memory";
reg = <0 0>;
};
soc@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
ranges = <0x00000000 0xf0000000 0x00053000>;
// Temporary until code stops depending on it.
device_type = "soc";
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <0xf0000000 0x00053000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
"simple-bus";
reg = <0x119c0 0x30>;
ranges;
muram {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 0x1100 0x1140
0xec0 0x9800 0x800>;
};
};
brg@119f0 {
compatible = "fsl,mpc8248-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x119f0 0x10 0x115f0 0x10>;
};
/* Monitor port/SMC1 */
smc1: serial@11a80 {
device_type = "serial";
compatible = "fsl,mpc8248-smc-uart",
"fsl,cpm2-smc-uart";
reg = <0x11a80 0x20 0x1100 0x40>;
interrupts = <4 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <7>;
fsl,cpm-command = <0x1d000000>;
linux,planetcore-label = "SMC1";
};
/* "Serial" port/SCC1 */
scc1: serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8248-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a00 0x20 0x8000 0x100>;
interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x00800000>;
linux,planetcore-label = "SCC1";
};
eth0: ethernet@11300 {
device_type = "network";
compatible = "fsl,mpc8248-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <0x12000300>;
};
eth1: ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8248-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
fsl,cpm-command = <0x16200300>;
};
usb@11b60 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc8248-usb",
"fsl,cpm2-usb";
reg = <0x11b60 0x18 0x8b00 0x100>;
interrupt-parent = <&PIC>;
interrupts = <11 8>;
fsl,cpm-command = <0x2e600000>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10c00 0x80>;
compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
};
};
};

49
arch/powerpc/boot/dts/mpc8313erdb.dts
View File

@ -45,10 +45,58 @@
reg = <00000000 08000000>; // 128MB at 0
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
reg = <e0005000 1000>;
interrupts = <d#77 8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
// booting from nand, but the
// addresses are the same.
ranges = <0 0 fe000000 00800000
1 0 e2800000 00008000
2 0 f0000000 00020000
3 0 fa000000 00008000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0 0 800000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8313-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <1 0 2000>;
u-boot@0 {
reg = <0 100000>;
read-only;
};
kernel@100000 {
reg = <100000 300000>;
};
fs@400000 {
reg = <400000 1c00000>;
};
};
};
soc8313@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <0>;
@ -92,7 +140,6 @@
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;

51
arch/powerpc/boot/dts/mpc832x_mds.dts
View File

@ -7,6 +7,18 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
* To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
* this:
*
* 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
* 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board
* next to the serial ports.
* 3) Solder a wire from U61-22 to P19K-22.
*
* Note that there's a typo in the schematic. The board labels the last column
* of pins "P19K", but in the schematic, that column is called "P19J". So if
* you're going by the schematic, the pin is called "P19J-K22".
*/
/ {
@ -169,6 +181,23 @@
1 1e 1 0 1 0 /* TX_EN */
1 1f 2 0 1 0>;/* CRS */
};
pio5: ucc_pin@05 {
pio-map = <
/*
* open has
* port pin dir drain sel irq
*/
2 0 1 0 2 0 /* TxD5 */
2 8 2 0 2 0 /* RxD5 */
2 1d 2 0 0 0 /* CTS5 */
2 1f 1 0 2 0 /* RTS5 */
2 18 2 0 0 0 /* CD */
>;
};
};
};
@ -176,6 +205,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
@ -210,7 +240,6 @@
};
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
@ -250,6 +279,26 @@
pio-handle = < &pio4 >;
};
ucc@2400 {
device_type = "serial";
compatible = "ucc_uart";
model = "UCC";
device-id = <5>; /* The UCC number, 1-7*/
port-number = <0>; /* Which ttyQEx device */
soft-uart; /* We need Soft-UART */
reg = <2400 200>;
interrupts = <28>; /* From Table 18-12 */
interrupt-parent = < &qeic >;
/*
* For Soft-UART, we need to set TX to 1X, which
* means specifying separate clock sources.
*/
rx-clock-name = "brg5";
tx-clock-name = "brg6";
pio-handle = < &pio5 >;
};
mdio@2320 {
#address-cells = <1>;
#size-cells = <0>;

30
arch/powerpc/boot/dts/mpc8349emitx.dts
View File

@ -91,7 +91,6 @@
};
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
@ -103,7 +102,6 @@
};
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
@ -127,14 +125,6 @@
reg = <1c>;
device_type = "ethernet-phy";
};
/* Vitesse 7385 */
phy1f: ethernet-phy@1f {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1f>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
@ -159,7 +149,8 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1f >;
/* Vitesse 7385 isn't on the MDIO bus */
fixed-link = <1 1 d#1000 0 0>;
linux,network-index = <1>;
};
@ -253,6 +244,21 @@
device_type = "pci";
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8349e-localbus",
"fsl,pq2pro-localbus";
reg = <e0005000 d8>;
ranges = <3 0 f0000000 210>;
pata@3,0 {
compatible = "fsl,mpc8349emitx-pata", "ata-generic";
reg = <3 0 10 3 20c 4>;
reg-shift = <1>;
pio-mode = <6>;
interrupts = <17 8>;
interrupt-parent = <&ipic>;
};
};
};

1
arch/powerpc/boot/dts/mpc8349emitxgp.dts
View File

@ -89,7 +89,6 @@
};
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;

2
arch/powerpc/boot/dts/mpc834x_mds.dts
View File

@ -104,7 +104,6 @@
/* phy type (ULPI or SERIAL) are only types supportted for MPH */
/* port = 0 or 1 */
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
@ -116,7 +115,6 @@
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;

1
arch/powerpc/boot/dts/mpc836x_mds.dts
View File

@ -241,7 +241,6 @@
};
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;

279
arch/powerpc/boot/dts/mpc8377_mds.dts 100644
View File

@ -0,0 +1,279 @@
/*
* MPC8377E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc8377emds";
compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8377@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>;
i-cache-line-size = <0x20>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0xe 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0xf 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
compatible = "fsl_spi";
reg = <0x7000 0x1000>;
interrupts = <0x10 0x8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <0x26 0x8>;
phy_type = "utmi_wide";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = < &ipic >;
interrupts = <0x11 0x8>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = < &ipic >;
interrupts = <0x12 0x8>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy2 >;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy3 >;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x9 0x8>;
interrupt-parent = < &ipic >;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0xa 0x8>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
model = "SEC3";
compatible = "talitos";
reg = <0x30000 0x10000>;
interrupts = <0xb 0x8>;
interrupt-parent = < &ipic >;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <0x18>;
exec-units-mask = <0x000001fe>;
descriptor-types-mask = <0x03ab0ebf>;
};
sdhc@2e000 {
model = "eSDHC";
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <0x2a 0x8>;
interrupt-parent = < &ipic >;
};
sata@18000 {
compatible = "fsl,mpc8379-sata";
reg = <0x18000 0x1000>;
interrupts = <0x2c 0x8>;
interrupt-parent = < &ipic >;
};
sata@19000 {
compatible = "fsl,mpc8379-sata";
reg = <0x19000 0x1000>;
interrupts = <0x2d 0x8>;
interrupt-parent = < &ipic >;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
};
pci0: pci@e0008500 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x12 */
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x13 */
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
interrupt-parent = < &ipic >;
interrupts = <0x42 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};

265
arch/powerpc/boot/dts/mpc8378_mds.dts 100644
View File

@ -0,0 +1,265 @@
/*
* MPC8378E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc8378emds";
compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8378@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>;
i-cache-line-size = <0x20>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0xe 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0xf 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
compatible = "fsl_spi";
reg = <0x7000 0x1000>;
interrupts = <0x10 0x8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <0x26 0x8>;
phy_type = "utmi_wide";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = < &ipic >;
interrupts = <0x11 0x8>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = < &ipic >;
interrupts = <0x12 0x8>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy2 >;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy3 >;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x9 0x8>;
interrupt-parent = < &ipic >;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0xa 0x8>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
model = "SEC3";
compatible = "talitos";
reg = <0x30000 0x10000>;
interrupts = <0xb 0x8>;
interrupt-parent = < &ipic >;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <0x18>;
exec-units-mask = <0x000001fe>;
descriptor-types-mask = <0x03ab0ebf>;
};
sdhc@2e000 {
model = "eSDHC";
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <0x2a 0x8>;
interrupt-parent = < &ipic >;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
};
pci0: pci@e0008500 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x12 */
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x13 */
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
interrupt-parent = < &ipic >;
interrupts = <0x42 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};

293
arch/powerpc/boot/dts/mpc8379_mds.dts 100644
View File

@ -0,0 +1,293 @@
/*
* MPC8379E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,mpc8379emds";
compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8379@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>;
i-cache-line-size = <0x20>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0xe 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0xf 0x8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
compatible = "fsl_spi";
reg = <0x7000 0x1000>;
interrupts = <0x10 0x8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <0x26 0x8>;
phy_type = "utmi_wide";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = < &ipic >;
interrupts = <0x11 0x8>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = < &ipic >;
interrupts = <0x12 0x8>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy2 >;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
phy-connection-type = "mii";
interrupt-parent = < &ipic >;
phy-handle = < &phy3 >;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x9 0x8>;
interrupt-parent = < &ipic >;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0xa 0x8>;
interrupt-parent = < &ipic >;
};
crypto@30000 {
model = "SEC3";
compatible = "talitos";
reg = <0x30000 0x10000>;
interrupts = <0xb 0x8>;
interrupt-parent = < &ipic >;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <0x18>;
exec-units-mask = <0x000001fe>;
descriptor-types-mask = <0x03ab0ebf>;
};
sdhc@2e000 {
model = "eSDHC";
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <0x2a 0x8>;
interrupt-parent = < &ipic >;
};
sata@18000 {
compatible = "fsl,mpc8379-sata";
reg = <0x18000 0x1000>;
interrupts = <0x2c 0x8>;
interrupt-parent = < &ipic >;
};
sata@19000 {
compatible = "fsl,mpc8379-sata";
reg = <0x19000 0x1000>;
interrupts = <0x2d 0x8>;
interrupt-parent = < &ipic >;
};
sata@1a000 {
compatible = "fsl,mpc8379-sata";
reg = <0x1a000 0x1000>;
interrupts = <0x2e 0x8>;
interrupt-parent = < &ipic >;
};
sata@1b000 {
compatible = "fsl,mpc8379-sata";
reg = <0x1b000 0x1000>;
interrupts = <0x2f 0x8>;
interrupt-parent = < &ipic >;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
};
};
pci0: pci@e0008500 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x12 */
0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x13 */
0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
interrupt-parent = < &ipic >;
interrupts = <0x42 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};

6
arch/powerpc/boot/dts/mpc8544ds.dts
View File

@ -304,9 +304,9 @@
interrupt-map = <
// IDSEL 0x1c USB
e000 0 0 1 &i8259 c 2
e100 0 0 1 &i8259 9 2
e200 0 0 1 &i8259 a 2
e300 0 0 1 &i8259 b 2
e100 0 0 2 &i8259 9 2
e200 0 0 3 &i8259 a 2
e300 0 0 4 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 1 &i8259 6 2

7
arch/powerpc/boot/dts/mpc8572ds.dts
View File

@ -334,9 +334,9 @@
// IDSEL 0x1c USB
e000 0 0 1 &i8259 c 2
e100 0 0 1 &i8259 9 2
e200 0 0 1 &i8259 a 2
e300 0 0 1 &i8259 b 2
e100 0 0 2 &i8259 9 2
e200 0 0 3 &i8259 a 2
e300 0 0 4 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 1 &i8259 6 2
@ -481,6 +481,7 @@
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1

113
arch/powerpc/boot/dts/mpc8610_hpcd.dts
View File

@ -1,7 +1,7 @@
/*
* MPC8610 HPCD Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
* Copyright 2007-2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License Version 2 as published
@ -49,6 +49,7 @@
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8610-immr", "simple-bus";
ranges = <0 e0000000 00100000>;
reg = <e0000000 1000>;
bus-frequency = <0>;
@ -62,6 +63,13 @@
interrupts = <2b 2>;
interrupt-parent = <&mpic>;
dfsrr;
cs4270:codec@4f {
compatible = "cirrus,cs4270";
reg = <4f>;
/* MCLK source is a stand-alone oscillator */
clock-frequency = <bb8000>;
};
};
i2c@3100 {
@ -111,6 +119,109 @@
reg = <e0000 1000>;
fsl,has-rstcr;
};
i2s@16000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <16000 100>;
interrupt-parent = <&mpic>;
interrupts = <3e 2>;
fsl,mode = "i2s-slave";
codec-handle = <&cs4270>;
};
ssi@16100 {
compatible = "fsl,mpc8610-ssi";
cell-index = <1>;
reg = <16100 100>;
interrupt-parent = <&mpic>;
interrupts = <3f 2>;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
cell-index = <0>;
reg = <21300 4>; /* DMA general status register */
ranges = <0 21100 200>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <0>;
reg = <0 80>;
interrupt-parent = <&mpic>;
interrupts = <14 2>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <1>;
reg = <80 80>;
interrupt-parent = <&mpic>;
interrupts = <15 2>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <2>;
reg = <100 80>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <3>;
reg = <180 80>;
interrupt-parent = <&mpic>;
interrupts = <17 2>;
};
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
cell-index = <1>;
reg = <c300 4>; /* DMA general status register */
ranges = <0 c100 200>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <0>;
reg = <0 80>;
interrupt-parent = <&mpic>;
interrupts = <3c 2>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <1>;
reg = <80 80>;
interrupt-parent = <&mpic>;
interrupts = <3d 2>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <2>;
reg = <100 80>;
interrupt-parent = <&mpic>;
interrupts = <3e 2>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <3>;
reg = <180 80>;
interrupt-parent = <&mpic>;
interrupts = <3f 2>;
};
};
};
pci0: pci@e0008000 {

48
arch/powerpc/boot/dts/mpc8641_hpcn.dts
View File

@ -60,10 +60,52 @@
reg = <00000000 40000000>; // 1G at 0x0
};
localbus@f8005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <f8005000 1000>;
interrupts = <13 2>;
interrupt-parent = <&mpic>;
ranges = <0 0 ff800000 00800000
1 0 fe000000 01000000
2 0 f8200000 00100000
3 0 f8100000 00100000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 00800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <00000000 00300000>;
};
partition@300000 {
label = "firmware b";
reg = <00300000 00100000>;
read-only;
};
partition@400000 {
label = "fs";
reg = <00400000 00300000>;
};
partition@700000 {
label = "firmware a";
reg = <00700000 00100000>;
read-only;
};
};
};
soc8641@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <00000000 f8000000 00100000>;
reg = <f8000000 00001000>; // CCSRBAR
bus-frequency = <0>;
@ -326,9 +368,9 @@
// IDSEL 0x1c USB
e000 0 0 1 &i8259 c 2
e100 0 0 1 &i8259 9 2
e200 0 0 1 &i8259 a 2
e300 0 0 1 &i8259 b 2
e100 0 0 2 &i8259 9 2
e200 0 0 3 &i8259 a 2
e300 0 0 4 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 1 &i8259 6 2

138
arch/powerpc/boot/dts/storcenter.dts 100644
View File

@ -0,0 +1,138 @@
/*
* Device Tree Source for IOMEGA StorCenter
*
* Copyright 2007 Oyvind Repvik
* Copyright 2007 Jon Loeliger
*
* Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/ {
model = "StorCenter";
compatible = "storcenter";
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8241@0 {
device_type = "cpu";
reg = <0>;
clock-frequency = <d# 200000000>; /* Hz */
timebase-frequency = <d# 25000000>; /* Hz */
bus-frequency = <0>; /* from bootwrapper */
i-cache-line-size = <d# 32>; /* bytes */
d-cache-line-size = <d# 32>; /* bytes */
i-cache-size = <4000>;
d-cache-size = <4000>;
};
};
memory {
device_type = "memory";
reg = <00000000 04000000>; /* 64MB @ 0x0 */
};
soc@fc000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8241", "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
ranges = <0 fc000000 100000>;
reg = <fc000000 100000>; /* EUMB */
bus-frequency = <0>; /* fixed by loader */
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
rtc@68 {
compatible = "dallas,ds1337";
reg = <68>;
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <4500 20>;
clock-frequency = <d# 97553800>; /* Hz */
current-speed = <d# 115200>;
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <4600 20>;
clock-frequency = <d# 97553800>; /* Hz */
current-speed = <d# 9600>;
interrupts = <a 2>;
interrupt-parent = <&mpic>;
};
mpic: interrupt-controller@40000 {
#interrupt-cells = <2>;
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <40000 40000>;
};
};
pci0: pci@fe800000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
reg = <fe800000 1000>;
ranges = <01000000 0 0 fe000000 0 00c00000
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <d# 97553800>; /* Hz */
interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 13 - IDE */
6800 0 0 1 &mpic 0 1
6800 0 0 2 &mpic 0 1
6800 0 0 3 &mpic 0 1
/* IDSEL 14 - USB */
7000 0 0 1 &mpic 0 1
7000 0 0 2 &mpic 0 1
7000 0 0 3 &mpic 0 1
7000 0 0 4 &mpic 0 1
/* IDSEL 15 - ETH */
7800 0 0 1 &mpic 0 1
7800 0 0 2 &mpic 0 1
7800 0 0 3 &mpic 0 1
7800 0 0 4 &mpic 0 1
>;
};
chosen {
linux,stdout-path = "/soc/serial@4500";
};
};

55
arch/powerpc/boot/ep8248e.c 100644
View File

@ -0,0 +1,55 @@
/*
* Embedded Planet EP8248E with PlanetCore firmware
*
* Author: Scott Wood <scottwood@freescale.com>
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "ops.h"
#include "stdio.h"
#include "planetcore.h"
#include "pq2.h"
static char *table;
static u64 mem_size;
#include <io.h>
static void platform_fixups(void)
{
u64 val;
dt_fixup_memory(0, mem_size);
planetcore_set_mac_addrs(table);
if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
printf("No PlanetCore crystal frequency key.\r\n");
return;
}
pq2_fixup_clocks(val);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
table = (char *)r3;
planetcore_prepare_table(table);
if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
return;
mem_size *= 1024 * 1024;
simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
fdt_init(_dtb_start);
planetcore_set_stdout_path(table);
serial_console_init();
platform_ops.fixups = platform_fixups;
}

14
arch/powerpc/boot/ops.h
View File

@ -159,9 +159,23 @@ static inline void *find_node_by_devtype(const void *prev,
return find_node_by_prop_value_str(prev, "device_type", type);
}
static inline void *find_node_by_alias(const char *alias)
{
void *devp = finddevice("/aliases");
if (devp) {
char path[MAX_PATH_LEN];
if (getprop(devp, alias, path, MAX_PATH_LEN) > 0)
return finddevice(path);
}
return NULL;
}
void dt_fixup_memory(u64 start, u64 size);
void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq);
void dt_fixup_clock(const char *path, u32 freq);
void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr);
void dt_fixup_mac_address(u32 index, const u8 *addr);
void __dt_fixup_mac_addresses(u32 startindex, ...);
#define dt_fixup_mac_addresses(...) \

58
arch/powerpc/boot/redboot-8xx.c 100644
View File

@ -0,0 +1,58 @@
/*
* RedBoot firmware support
*
* Author: Scott Wood <scottwood@freescale.com>
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "ops.h"
#include "stdio.h"
#include "redboot.h"
#include "fsl-soc.h"
#include "io.h"
static bd_t bd;
BSS_STACK(4096);
#define MHZ(x) ((x + 500000) / 1000000)
static void platform_fixups(void)
{
void *node;
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_addresses(bd.bi_enetaddr);
dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
node = finddevice("/soc/cpm/brg");
if (node) {
printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
bd.bi_busfreq, MHZ(bd.bi_busfreq));
setprop(node, "clock-frequency", &bd.bi_busfreq, 4);
}
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
memcpy(&bd, (char *)r3, sizeof(bd));
if (bd.bi_tag != 0x42444944)
return;
simple_alloc_init(_end,
bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
32, 64);
fdt_init(_dtb_start);
serial_console_init();
platform_ops.fixups = platform_fixups;
loader_info.cmdline = (char *)bd.bi_cmdline;
loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
}

56
arch/powerpc/boot/redboot.h 100644
View File

@ -0,0 +1,56 @@
#ifndef _PPC_REDBOOT_H
#define _PPC_REDBOOT_H
//=========================================================================
// include/asm-ppc/redboot.h
// Copyright (c) 2002, 2003 Gary Thomas (<gary@mlbassoc.com>
// Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
//
// Board specific details, as provided by RedBoot
//
/* A Board Information structure that is given to a program when
* RedBoot starts it up. Note: not all fields make sense for all
* architectures and it's up to the platform specific code to fill
* in the details.
*/
typedef struct bd_info {
unsigned int bi_tag; /* Should be 0x42444944 "BDID" */
unsigned int bi_size; /* Size of this structure */
unsigned int bi_revision; /* revision of this structure */
unsigned int bi_bdate; /* bootstrap date, i.e. 0x19971106 */
unsigned int bi_memstart; /* Memory start address */
unsigned int bi_memsize; /* Memory (end) size in bytes */
unsigned int bi_intfreq; /* Internal Freq, in Hz */
unsigned int bi_busfreq; /* Bus Freq, in Hz */
unsigned int bi_cpmfreq; /* CPM Freq, in Hz */
unsigned int bi_brgfreq; /* BRG Freq, in Hz */
unsigned int bi_vco; /* VCO Out from PLL */
unsigned int bi_pci_freq; /* PCI Freq, in Hz */
unsigned int bi_baudrate; /* Default console baud rate */
unsigned int bi_immr; /* IMMR when called from boot rom */
unsigned char bi_enetaddr[6];
unsigned int bi_flashbase; /* Physical address of FLASH memory */
unsigned int bi_flashsize; /* Length of FLASH memory */
int bi_flashwidth; /* Width (8,16,32,64) */
unsigned char *bi_cmdline; /* Pointer to command line */
unsigned char bi_esa[3][6]; /* Ethernet station addresses */
unsigned int bi_ramdisk_begin, bi_ramdisk_end;
struct { /* Information about [main] video screen */
short x_res; /* Horizontal resolution in pixels */
short y_res; /* Vertical resolution in pixels */
short bpp; /* Bits/pixel */
short mode; /* Type of pixels (packed, indexed) */
unsigned long fb; /* Pointer to frame buffer (pixel) memory */
} bi_video;
void (*bi_cputc)(char); /* Write a character to the RedBoot console */
char (*bi_cgetc)(void); /* Read a character from the RedBoot console */
int (*bi_ctstc)(void); /* Test for input on the RedBoot console */
} bd_t;
#define BI_REV 0x0102 /* Version 1.02 */
#define bi_pci_busfreq bi_pci_freq
#define bi_immr_base bi_immr
#endif

2
arch/powerpc/boot/wrapper
View File

@ -168,7 +168,7 @@ ps3)
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
;;
ep88xc|ep405)
ep88xc|ep405|redboot*|ep8248e)
platformo="$object/fixed-head.o $object/$platform.o"
binary=y
;;

798
arch/powerpc/configs/adder875-redboot_defconfig 100644
View File

@ -0,0 +1,798 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Thu Jan 17 16:17:38 2008
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_6xx is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Platform support
#
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_MPC8XXFADS is not set
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
# CONFIG_PPC_EP88XC is not set
CONFIG_PPC_ADDER875=y
#
# MPC8xx CPM Options
#
#
# Generic MPC8xx Options
#
CONFIG_8xx_COPYBACK=y
# CONFIG_8xx_CPU6 is not set
CONFIG_8xx_CPU15=y
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="adder875-redboot.dts"
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_CPM_SCC1 is not set
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
# CONFIG_SERIAL_CPM_SCC4 is not set
CONFIG_SERIAL_CPM_SMC1=y
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y

798
arch/powerpc/configs/adder875-uboot_defconfig 100644
View File

@ -0,0 +1,798 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Thu Jan 17 16:17:18 2008
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_6xx is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Platform support
#
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_MPC8XXFADS is not set
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
# CONFIG_PPC_EP88XC is not set
CONFIG_PPC_ADDER875=y
#
# MPC8xx CPM Options
#
#
# Generic MPC8xx Options
#
CONFIG_8xx_COPYBACK=y
# CONFIG_8xx_CPU6 is not set
CONFIG_8xx_CPU15=y
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="adder875-uboot.dts"
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_CPM_SCC1 is not set
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
# CONFIG_SERIAL_CPM_SCC4 is not set
CONFIG_SERIAL_CPM_SMC1=y
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y

821
arch/powerpc/configs/ep8248e_defconfig 100644
View File

@ -0,0 +1,821 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
# Fri Jan 11 14:02:06 2008
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
# CONFIG_PQ2FADS is not set
CONFIG_EP8248E=y
# CONFIG_PQ2ADS is not set
CONFIG_8260=y
CONFIG_8272=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_CPM2=y
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="ep8248e.dts"
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_SERIAL_CPM_SCC1=y
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
CONFIG_SERIAL_CPM_SCC4=y
# CONFIG_SERIAL_CPM_SMC1 is not set
# CONFIG_SERIAL_CPM_SMC2 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_UCC_SLOW is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y

46
arch/powerpc/configs/mpc8313_rdb_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc4
# Thu Dec 6 16:48:31 2007
# Linux kernel version: 2.6.24-rc6
# Thu Jan 17 16:35:55 2008
#
# CONFIG_PPC64 is not set
@ -144,6 +144,7 @@ CONFIG_MPC8313_RDB=y
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
CONFIG_PPC_MPC831x=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@ -336,15 +337,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
@ -381,11 +383,8 @@ CONFIG_MTD_CFI_UTIL=y
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xfe000000
CONFIG_MTD_PHYSMAP_LEN=0x1000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
@ -406,7 +405,16 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
@ -1178,7 +1186,17 @@ CONFIG_TMPFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@ -1242,6 +1260,8 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y

3
arch/powerpc/configs/mpc834x_itx_defconfig
View File

@ -570,7 +570,8 @@ CONFIG_SATA_SIL=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y

171
arch/powerpc/configs/mpc8610_hpcd_defconfig
View File

@ -696,7 +696,7 @@ CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
@ -708,7 +708,60 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
@ -763,7 +816,119 @@ CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
#
# ALSA PowerPC devices
#
#
# System on Chip audio support
#
CONFIG_SND_SOC=y
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
CONFIG_SND_SOC_MPC8610=y
CONFIG_SND_SOC_MPC8610_HPCD=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set

1174
arch/powerpc/configs/storcenter_defconfig 100644
View File

File diff suppressed because it is too large Load Diff

1
arch/powerpc/kernel/Makefile
View File

@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o

20
arch/powerpc/kernel/head_fsl_booke.S
View File

@ -73,8 +73,8 @@ _ENTRY(_start);
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
* boot loader and load a single entry in TLB1[0] to map the
* first 16M of kernel memory. Any boot info passed from the
* bootloader needs to live in this first 16M.
* first 64M of kernel memory. Any boot info passed from the
* bootloader needs to live in this first 64M.
*
* Requirement on bootloader:
* - The page we're executing in needs to reside in TLB1 and
@ -167,7 +167,7 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_MAS0,r7
tlbre
/* Just modify the entry ID and EPN for the temp mapping */
/* Just modify the entry ID, EPN and RPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
@ -177,9 +177,12 @@ skpinv: addi r6,r6,1 /* Increment */
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
li r7,0 /* temp EPN = 0 */
lis r7,PHYSICAL_START@h
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS2,r7
mfspr r6,SPRN_MAS3
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS3,r7
tlbwe
xori r6,r4,1
@ -222,11 +225,11 @@ skpinv: addi r6,r6,1 /* Increment */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
li r7,0
lis r6,KERNELBASE@h
ori r6,r6,KERNELBASE@l
lis r6,PAGE_OFFSET@h
ori r6,r6,PAGE_OFFSET@l
rlwimi r6,r7,0,20,31
mtspr SPRN_MAS2,r6
li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
@ -234,6 +237,9 @@ skpinv: addi r6,r6,1 /* Increment */
tlbwe
/* 7. Jump to KERNELBASE mapping */
lis r6,KERNELBASE@h
ori r6,r6,KERNELBASE@l
rlwimi r6,r7,0,20,31
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */

8
arch/powerpc/kernel/pci-common.c
View File

@ -792,9 +792,10 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
if ((res = bus->resource[i]) == NULL)
continue;
if (!res->flags || bus->self->transparent)
if (!res->flags)
continue;
if (i >= 3 && bus->self->transparent)
continue;
/* On PowerMac, Apple leaves bridge windows open over
* an inaccessible region of memory space (0...fffff)
* which is somewhat bogus, but that's what they think
@ -806,7 +807,8 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
* equal to the pci_mem_offset of the host bridge and
* their size is smaller than 1M.
*/
if (res->start == hose->pci_mem_offset &&
if (res->flags & IORESOURCE_MEM &&
res->start == hose->pci_mem_offset &&
res->end < 0x100000) {
printk(KERN_INFO
"PCI: Closing bogus Apple Firmware"

58
arch/powerpc/kernel/pci_32.c
View File

@ -94,64 +94,6 @@ fixup_cpc710_pci64(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
void __init
update_bridge_resource(struct pci_dev *dev, struct resource *res)
{
u8 io_base_lo, io_limit_lo;
u16 mem_base, mem_limit;
u16 cmd;
resource_size_t start, end, off;
struct pci_controller *hose = dev->sysdata;
if (!hose) {
printk("update_bridge_base: no hose?\n");
return;
}
pci_read_config_word(dev, PCI_COMMAND, &cmd);
pci_write_config_word(dev, PCI_COMMAND,
cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
if (res->flags & IORESOURCE_IO) {
off = (unsigned long) hose->io_base_virt - isa_io_base;
start = res->start - off;
end = res->end - off;
io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
if (end > 0xffff)
io_base_lo |= PCI_IO_RANGE_TYPE_32;
else
io_base_lo |= PCI_IO_RANGE_TYPE_16;
pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
start >> 16);
pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
end >> 16);
pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
== IORESOURCE_MEM) {
off = hose->pci_mem_offset;
mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
== (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
off = hose->pci_mem_offset;
mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
} else {
DBG(KERN_ERR "PCI: ugh, bridge %s res has flags=%lx\n",
pci_name(dev), res->flags);
}
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
#ifdef CONFIG_PPC_OF
/*
* Functions below are used on OpenFirmware machines.

0
arch/ppc/kernel/rio.c → arch/powerpc/kernel/rio.c
View File

40
arch/powerpc/math-emu/op-4.h
View File

@ -194,19 +194,39 @@
(X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
#ifndef __FP_FRAC_ADD_4
#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
(r0 = x0 + y0, \
r1 = x1 + y1 + (r0 < x0), \
r2 = x2 + y2 + (r1 < x1), \
r3 = x3 + y3 + (r2 < x2))
#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
do { \
int _c1, _c2, _c3; \
r0 = x0 + y0; \
_c1 = r0 < x0; \
r1 = x1 + y1; \
_c2 = r1 < x1; \
r1 += _c1; \
_c2 |= r1 < _c1; \
r2 = x2 + y2; \
_c3 = r2 < x2; \
r2 += _c2; \
_c3 |= r2 < _c2; \
r3 = x3 + y3 + _c3; \
} while (0)
#endif
#ifndef __FP_FRAC_SUB_4
#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
(r0 = x0 - y0, \
r1 = x1 - y1 - (r0 > x0), \
r2 = x2 - y2 - (r1 > x1), \
r3 = x3 - y3 - (r2 > x2))
#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
do { \
int _c1, _c2, _c3; \
r0 = x0 - y0; \
_c1 = r0 > x0; \
r1 = x1 - y1; \
_c2 = r1 > x1; \
r1 -= _c1; \
_c2 |= r1 > _c1; \
r2 = x2 - y2; \
_c3 = r2 > x2; \
r2 -= _c2; \
_c3 |= r2 > _c2; \
r3 = x3 - y3 - _c3; \
} while (0)
#endif
#ifndef __FP_FRAC_ADDI_4

6
arch/powerpc/mm/fsl_booke_mmu.c
View File

@ -165,15 +165,15 @@ void invalidate_tlbcam_entry(int index)
void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
unsigned long cam2)
{
settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
tlbcam_index++;
if (cam1) {
tlbcam_index++;
settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
}
if (cam2) {
tlbcam_index++;
settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
}
}

13
arch/powerpc/mm/lmb.c
View File

@ -342,3 +342,16 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit)
}
}
}
int __init lmb_is_reserved(unsigned long addr)
{
int i;
for (i = 0; i < lmb.reserved.cnt; i++) {
unsigned long upper = lmb.reserved.region[i].base +
lmb.reserved.region[i].size - 1;
if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
return 1;
}
return 0;
}

21
arch/powerpc/mm/mem.c
View File

@ -213,15 +213,30 @@ void __init do_init_bootmem(void)
*/
#ifdef CONFIG_HIGHMEM
free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++) {
unsigned long addr = lmb.reserved.region[i].base +
lmb_size_bytes(&lmb.reserved, i) - 1;
if (addr < total_lowmem)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i));
else if (lmb.reserved.region[i].base < total_lowmem) {
unsigned long adjusted_size = total_lowmem -
lmb.reserved.region[i].base;
reserve_bootmem(lmb.reserved.region[i].base,
adjusted_size);
}
}
#else
free_bootmem_with_active_regions(0, max_pfn);
#endif
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i));
#endif
/* XXX need to clip this if using highmem? */
sparse_memory_present_with_active_regions(0);
@ -334,11 +349,13 @@ void __init mem_init(void)
highmem_mapnr = total_lowmem >> PAGE_SHIFT;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
struct page *page = pfn_to_page(pfn);
if (lmb_is_reserved(pfn << PAGE_SHIFT))
continue;
ClearPageReserved(page);
init_page_count(page);
__free_page(page);
totalhigh_pages++;
reservedpages--;
}
totalram_pages += totalhigh_pages;
printk(KERN_DEBUG "High memory: %luk\n",

13
arch/powerpc/platforms/82xx/Kconfig
View File

@ -26,6 +26,19 @@ config PQ2FADS
help
This option enables support for the PQ2FADS board
config EP8248E
bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
select 8272
select 8260
select FSL_SOC
select PPC_CPM_NEW_BINDING
select MDIO_BITBANG
help
This enables support for the Embedded Planet EP8248E board.
This board is also resold by Freescale as the QUICCStart
MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
endchoice
config PQ2ADS

1
arch/powerpc/platforms/82xx/Makefile
View File

@ -5,3 +5,4 @@ obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
obj-$(CONFIG_CPM2) += pq2.o
obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
obj-$(CONFIG_PQ2FADS) += pq2fads.o
obj-$(CONFIG_EP8248E) += ep8248e.o

324
arch/powerpc/platforms/82xx/ep8248e.c 100644
View File

@ -0,0 +1,324 @@
/*
* Embedded Planet EP8248E support
*
* Copyright 2007 Freescale Semiconductor, Inc.
* Author: Scott Wood <scottwood@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/fsl_devices.h>
#include <linux/mdio-bitbang.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/mpc8260.h>
#include <asm/prom.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
#include "pq2.h"
static u8 __iomem *ep8248e_bcsr;
static struct device_node *ep8248e_bcsr_node;
#define BCSR7_SCC2_ENABLE 0x10
#define BCSR8_PHY1_ENABLE 0x80
#define BCSR8_PHY1_POWER 0x40
#define BCSR8_PHY2_ENABLE 0x20
#define BCSR8_PHY2_POWER 0x10
#define BCSR8_MDIO_READ 0x04
#define BCSR8_MDIO_CLOCK 0x02
#define BCSR8_MDIO_DATA 0x01
#define BCSR9_USB_ENABLE 0x80
#define BCSR9_USB_POWER 0x40
#define BCSR9_USB_HOST 0x20
#define BCSR9_USB_FULL_SPEED_TARGET 0x10
static void __init ep8248e_pic_init(void)
{
struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
if (!np) {
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
return;
}
cpm2_pic_init(np);
of_node_put(np);
}
static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
{
if (level)
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
else
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
/* Read back to flush the write. */
in_8(&ep8248e_bcsr[8]);
}
static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output)
{
if (output)
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
else
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
/* Read back to flush the write. */
in_8(&ep8248e_bcsr[8]);
}
static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data)
{
if (data)
setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
else
clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
/* Read back to flush the write. */
in_8(&ep8248e_bcsr[8]);
}
static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl)
{
return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA;
}
static const struct mdiobb_ops ep8248e_mdio_ops = {
.set_mdc = ep8248e_set_mdc,
.set_mdio_dir = ep8248e_set_mdio_dir,
.set_mdio_data = ep8248e_set_mdio_data,
.get_mdio_data = ep8248e_get_mdio_data,
.owner = THIS_MODULE,
};
static struct mdiobb_ctrl ep8248e_mdio_ctrl = {
.ops = &ep8248e_mdio_ops,
};
static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct mii_bus *bus;
struct resource res;
struct device_node *node;
int ret, i;
node = of_get_parent(ofdev->node);
of_node_put(node);
if (node != ep8248e_bcsr_node)
return -ENODEV;
ret = of_address_to_resource(ofdev->node, 0, &res);
if (ret)
return ret;
bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl);
if (!bus)
return -ENOMEM;
bus->phy_mask = 0;
bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
for (i = 0; i < PHY_MAX_ADDR; i++)
bus->irq[i] = -1;
bus->name = "ep8248e-mdio-bitbang";
bus->dev = &ofdev->dev;
bus->id = res.start;
return mdiobus_register(bus);
}
static int ep8248e_mdio_remove(struct of_device *ofdev)
{
BUG();
return 0;
}
static const struct of_device_id ep8248e_mdio_match[] = {
{
.compatible = "fsl,ep8248e-mdio-bitbang",
},
{},
};
static struct of_platform_driver ep8248e_mdio_driver = {
.driver = {
.name = "ep8248e-mdio-bitbang",
},
.match_table = ep8248e_mdio_match,
.probe = ep8248e_mdio_probe,
.remove = ep8248e_mdio_remove,
};
struct cpm_pin {
int port, pin, flags;
};
static __initdata struct cpm_pin ep8248e_pins[] = {
/* SMC1 */
{2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
/* SCC1 */
{2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC1 */
{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC2 */
{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* I2C */
{4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
{4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
/* USB */
{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
};
static void __init init_ioports(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) {
const struct cpm_pin *pin = &ep8248e_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
}
static void __init ep8248e_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("ep8248e_setup_arch()", 0);
cpm2_reset();
/* When this is set, snooping CPM DMA from RAM causes
* machine checks. See erratum SIU18.
*/
clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
ep8248e_bcsr_node =
of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr");
if (!ep8248e_bcsr_node) {
printk(KERN_ERR "No bcsr in device tree\n");
return;
}
ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
if (!ep8248e_bcsr) {
printk(KERN_ERR "Cannot map BCSR registers\n");
of_node_put(ep8248e_bcsr_node);
ep8248e_bcsr_node = NULL;
return;
}
setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE);
setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
init_ioports();
if (ppc_md.progress)
ppc_md.progress("ep8248e_setup_arch(), finish", 0);
}
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "fsl,ep8248e-bcsr", },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
of_register_platform_driver(&ep8248e_mdio_driver);
return 0;
}
machine_device_initcall(ep8248e, declare_of_platform_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init ep8248e_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,ep8248e");
}
define_machine(ep8248e)
{
.name = "Embedded Planet EP8248E",
.probe = ep8248e_probe,
.setup_arch = ep8248e_setup_arch,
.init_IRQ = ep8248e_pic_init,
.get_irq = cpm2_get_irq,
.calibrate_decr = generic_calibrate_decr,
.restart = pq2_restart,
.progress = udbg_progress,
};

13
arch/powerpc/platforms/83xx/mpc8313_rdb.c
View File

@ -14,6 +14,7 @@
*/
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/ipic.h>
@ -75,6 +76,18 @@ static int __init mpc8313_rdb_probe(void)
return of_flat_dt_is_compatible(root, "MPC8313ERDB");
}
static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus" },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(mpc8313_rdb, declare_of_platform_devices);
define_machine(mpc8313_rdb) {
.name = "MPC8313 RDB",
.probe = mpc8313_rdb_probe,

5
arch/powerpc/platforms/83xx/mpc832x_mds.c
View File

@ -110,15 +110,12 @@ static struct of_device_id mpc832x_ids[] = {
static int __init mpc832x_declare_of_platform_devices(void)
{
if (!machine_is(mpc832x_mds))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
return 0;
}
device_initcall(mpc832x_declare_of_platform_devices);
machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
static void __init mpc832x_sys_init_IRQ(void)
{

10
arch/powerpc/platforms/83xx/mpc832x_rdb.c
View File

@ -63,9 +63,6 @@ static struct spi_board_info mpc832x_spi_boardinfo = {
static int __init mpc832x_spi_init(void)
{
if (!machine_is(mpc832x_rdb))
return 0;
par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */
@ -80,7 +77,7 @@ static int __init mpc832x_spi_init(void)
mpc83xx_spi_deactivate_cs);
}
device_initcall(mpc832x_spi_init);
machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
/* ************************************************************************
*
@ -123,15 +120,12 @@ static struct of_device_id mpc832x_ids[] = {
static int __init mpc832x_declare_of_platform_devices(void)
{
if (!machine_is(mpc832x_rdb))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc832x_ids, NULL);
return 0;
}
device_initcall(mpc832x_declare_of_platform_devices);
machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
void __init mpc832x_rdb_init_IRQ(void)
{

12
arch/powerpc/platforms/83xx/mpc834x_itx.c
View File

@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/atomic.h>
@ -37,6 +38,17 @@
#include "mpc83xx.h"
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
{},
};
static int __init mpc834x_itx_declare_of_platform_devices(void)
{
return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
}
machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
/* ************************************************************************
*
* Setup the architecture

5
arch/powerpc/platforms/83xx/mpc834x_mds.c
View File

@ -115,13 +115,10 @@ static struct of_device_id mpc834x_ids[] = {
static int __init mpc834x_declare_of_platform_devices(void)
{
if (!machine_is(mpc834x_mds))
return 0;
of_platform_bus_probe(NULL, mpc834x_ids, NULL);
return 0;
}
device_initcall(mpc834x_declare_of_platform_devices);
machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened

5
arch/powerpc/platforms/83xx/mpc836x_mds.c
View File

@ -141,15 +141,12 @@ static struct of_device_id mpc836x_ids[] = {
static int __init mpc836x_declare_of_platform_devices(void)
{
if (!machine_is(mpc836x_mds))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc836x_ids, NULL);
return 0;
}
device_initcall(mpc836x_declare_of_platform_devices);
machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
static void __init mpc836x_mds_init_IRQ(void)
{

56
arch/powerpc/platforms/83xx/mpc837x_mds.c
View File

@ -22,6 +22,56 @@
#include "mpc83xx.h"
#define BCSR12_USB_SER_MASK 0x8a
#define BCSR12_USB_SER_PIN 0x80
#define BCSR12_USB_SER_DEVICE 0x02
extern int mpc837x_usb_cfg(void);
static int mpc837xmds_usb_cfg(void)
{
struct device_node *np;
const void *phy_type, *mode;
void __iomem *bcsr_regs = NULL;
u8 bcsr12;
int ret;
ret = mpc837x_usb_cfg();
if (ret)
return ret;
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np) {
struct resource res;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, res.end - res.start + 1);
of_node_put(np);
}
if (!bcsr_regs)
return -1;
np = of_find_node_by_name(NULL, "usb");
if (!np)
return -ENODEV;
phy_type = of_get_property(np, "phy_type", NULL);
if (phy_type && !strcmp(phy_type, "ulpi")) {
clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
} else if (phy_type && !strcmp(phy_type, "serial")) {
mode = of_get_property(np, "dr_mode", NULL);
bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
bcsr12 |= BCSR12_USB_SER_PIN;
if (mode && !strcmp(mode, "peripheral"))
bcsr12 |= BCSR12_USB_SER_DEVICE;
out_8(bcsr_regs + 12, bcsr12);
} else {
printk(KERN_ERR "USB DR: unsupported PHY\n");
}
of_node_put(np);
iounmap(bcsr_regs);
return 0;
}
/* ************************************************************************
*
* Setup the architecture
@ -40,6 +90,7 @@ static void __init mpc837x_mds_setup_arch(void)
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
mpc83xx_add_bridge(np);
#endif
mpc837xmds_usb_cfg();
}
static struct of_device_id mpc837x_ids[] = {
@ -50,15 +101,12 @@ static struct of_device_id mpc837x_ids[] = {
static int __init mpc837x_declare_of_platform_devices(void)
{
if (!machine_is(mpc837x_mds))
return 0;
/* Publish of_device */
of_platform_bus_probe(NULL, mpc837x_ids, NULL);
return 0;
}
device_initcall(mpc837x_declare_of_platform_devices);
machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
static void __init mpc837x_mds_init_IRQ(void)
{

3
arch/powerpc/platforms/83xx/mpc83xx.h
View File

@ -14,6 +14,7 @@
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
#define MPC837X_SCCR_USB_DRCM_11 0x00c00000
/* system i/o configuration register low */
#define MPC83XX_SICRL_OFFS 0x114
@ -22,6 +23,8 @@
#define MPC834X_SICRL_USB1 0x20000000
#define MPC831X_SICRL_USB_MASK 0x00000c00
#define MPC831X_SICRL_USB_ULPI 0x00000800
#define MPC837X_SICRL_USB_MASK 0xf0000000
#define MPC837X_SICRL_USB_ULPI 0x50000000
/* system i/o configuration register high */
#define MPC83XX_SICRH_OFFS 0x118

46
arch/powerpc/platforms/83xx/usb.c
View File

@ -41,7 +41,7 @@ int mpc834x_usb_cfg(void)
sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
if (np) {
sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
@ -67,7 +67,7 @@ int mpc834x_usb_cfg(void)
port0_is_dr = 1;
of_node_put(np);
}
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
if (np) {
sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
@ -111,7 +111,7 @@ int mpc831x_usb_cfg(void)
const void *dr_mode;
#endif
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
if (!np)
return -ENODEV;
prop = of_get_property(np, "phy_type", NULL);
@ -179,3 +179,43 @@ int mpc831x_usb_cfg(void)
return ret;
}
#endif /* CONFIG_PPC_MPC831x */
#ifdef CONFIG_PPC_MPC837x
int mpc837x_usb_cfg(void)
{
void __iomem *immap;
struct device_node *np = NULL;
const void *prop;
int ret = 0;
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
if (!np)
return -ENODEV;
prop = of_get_property(np, "phy_type", NULL);
if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
printk(KERN_WARNING "837x USB PHY type not supported\n");
of_node_put(np);
return -EINVAL;
}
/* Map IMMR space for pin and clock settings */
immap = ioremap(get_immrbase(), 0x1000);
if (!immap) {
of_node_put(np);
return -ENOMEM;
}
/* Configure clock */
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
MPC837X_SCCR_USB_DRCM_11);
/* Configure pin mux for ULPI/serial */
clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
MPC837X_SICRL_USB_ULPI);
iounmap(immap);
of_node_put(np);
return ret;
}
#endif /* CONFIG_PPC_MPC837x */

18
arch/powerpc/platforms/85xx/mpc85xx_ads.c
View File

@ -52,9 +52,9 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
{
int cascade_irq;
while ((cascade_irq = cpm2_get_irq()) >= 0) {
while ((cascade_irq = cpm2_get_irq()) >= 0)
generic_handle_irq(cascade_irq);
}
desc->chip->eoi(irq);
}
@ -70,13 +70,12 @@ static void __init mpc85xx_ads_pic_init(void)
#endif
np = of_find_node_by_type(np, "open-pic");
if (np == NULL) {
if (!np) {
printk(KERN_ERR "Could not find open-pic node\n");
return;
}
if(of_address_to_resource(np, 0, &r)) {
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "Could not map mpic register space\n");
of_node_put(np);
return;
@ -100,6 +99,7 @@ static void __init mpc85xx_ads_pic_init(void)
irq = irq_of_parse_and_map(np, 0);
cpm2_pic_init(np);
of_node_put(np);
set_irq_chained_handler(irq, cpm2_cascade);
#endif
}
@ -112,7 +112,7 @@ struct cpm_pin {
int port, pin, flags;
};
static struct cpm_pin mpc8560_ads_pins[] = {
static const struct cpm_pin mpc8560_ads_pins[] = {
/* SCC1 */
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
@ -233,13 +233,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
static int __init declare_of_platform_devices(void)
{
if (!machine_is(mpc85xx_ads))
return 0;
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
device_initcall(declare_of_platform_devices);
machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
/*
* Called very early, device-tree isn't unflattened

6
arch/powerpc/platforms/85xx/mpc85xx_cds.c
View File

@ -222,9 +222,6 @@ static int mpc85xx_cds_8259_attach(void)
struct device_node *cascade_node = NULL;
int cascade_irq;
if (!machine_is(mpc85xx_cds))
return 0;
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "chrp,iic")) {
@ -262,8 +259,7 @@ static int mpc85xx_cds_8259_attach(void)
return 0;
}
device_initcall(mpc85xx_cds_8259_attach);
machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
#endif /* CONFIG_PPC_I8259 */

7
arch/powerpc/platforms/85xx/mpc85xx_mds.c
View File

@ -144,15 +144,12 @@ static struct of_device_id mpc85xx_ids[] = {
static int __init mpc85xx_publish_devices(void)
{
if (!machine_is(mpc85xx_mds))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
return 0;
}
device_initcall(mpc85xx_publish_devices);
machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices);
static void __init mpc85xx_mds_pic_init(void)
{

15
arch/powerpc/platforms/86xx/mpc8610_hpcd.c
View File

@ -34,9 +34,24 @@
#include <asm/mpic.h>
#include <linux/of_platform.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
{}
};
static int __init mpc8610_declare_of_platform_devices(void)
{
/* Without this call, the SSI device driver won't get probed. */
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
return 0;
}
machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
void __init
mpc86xx_hpcd_init_irq(void)
{

14
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
View File

@ -18,6 +18,7 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
@ -212,6 +213,19 @@ mpc86xx_time_init(void)
return 0;
}
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
define_machine(mpc86xx_hpcn) {
.name = "MPC86xx HPCN",
.probe = mpc86xx_hpcn_probe,

9
arch/powerpc/platforms/8xx/Kconfig
View File

@ -44,6 +44,15 @@ config PPC_EP88XC
This board is also resold by Freescale as the QUICCStart
MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
config PPC_ADDER875
bool "Analogue & Micro Adder 875"
select CPM1
select PPC_CPM_NEW_BINDING
select REDBOOT
help
This enables support for the Analogue & Micro Adder 875
board.
endchoice
menu "Freescale Ethernet driver platform-specific options"

1
arch/powerpc/platforms/8xx/Makefile
View File

@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_8xx) += m8xx_setup.o
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
obj-$(CONFIG_PPC_ADDER875) += adder875.o

118
arch/powerpc/platforms/8xx/adder875.c 100644
View File

@ -0,0 +1,118 @@
/* Analogue & Micro Adder MPC875 board support
*
* Author: Scott Wood <scottwood@freescale.com>
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/fs_enet_pd.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/commproc.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
#include <asm/prom.h>
#include <sysdev/commproc.h>
struct cpm_pin {
int port, pin, flags;
};
static __initdata struct cpm_pin adder875_pins[] = {
/* SMC1 */
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
/* MII1 */
{CPM_PORTA, 0, CPM_PIN_INPUT},
{CPM_PORTA, 1, CPM_PIN_INPUT},
{CPM_PORTA, 2, CPM_PIN_INPUT},
{CPM_PORTA, 3, CPM_PIN_INPUT},
{CPM_PORTA, 4, CPM_PIN_OUTPUT},
{CPM_PORTA, 10, CPM_PIN_OUTPUT},
{CPM_PORTA, 11, CPM_PIN_OUTPUT},
{CPM_PORTB, 19, CPM_PIN_INPUT},
{CPM_PORTB, 31, CPM_PIN_INPUT},
{CPM_PORTC, 12, CPM_PIN_INPUT},
{CPM_PORTC, 13, CPM_PIN_INPUT},
{CPM_PORTE, 30, CPM_PIN_OUTPUT},
{CPM_PORTE, 31, CPM_PIN_OUTPUT},
/* MII2 */
{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 16, CPM_PIN_OUTPUT},
{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 21, CPM_PIN_OUTPUT},
{CPM_PORTE, 22, CPM_PIN_OUTPUT},
{CPM_PORTE, 23, CPM_PIN_OUTPUT},
{CPM_PORTE, 24, CPM_PIN_OUTPUT},
{CPM_PORTE, 25, CPM_PIN_OUTPUT},
{CPM_PORTE, 26, CPM_PIN_OUTPUT},
{CPM_PORTE, 27, CPM_PIN_OUTPUT},
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
};
static void __init init_ioports(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) {
const struct cpm_pin *pin = &adder875_pins[i];
cpm1_set_pin(pin->port, pin->pin, pin->flags);
}
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
/* Set FEC1 and FEC2 to MII mode */
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
}
static void __init adder875_setup(void)
{
cpm_reset();
init_ioports();
}
static int __init adder875_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "analogue-and-micro,adder875");
}
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
{},
};
static int __init declare_of_platform_devices(void)
{
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(adder875, declare_of_platform_devices);
define_machine(adder875) {
.name = "Adder MPC875",
.probe = adder875_probe,
.setup_arch = adder875_setup,
.init_IRQ = m8xx_pic_init,
.get_irq = mpc8xx_get_irq,
.restart = mpc8xx_restart,
.calibrate_decr = generic_calibrate_decr,
.set_rtc_time = mpc8xx_set_rtc_time,
.get_rtc_time = mpc8xx_get_rtc_time,
.progress = udbg_progress,
};

5
arch/powerpc/platforms/8xx/ep88xc.c
View File

@ -155,12 +155,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
static int __init declare_of_platform_devices(void)
{
/* Publish the QE devices */
if (machine_is(ep88xc))
of_platform_bus_probe(NULL, of_bus_ids, NULL);
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
device_initcall(declare_of_platform_devices);
machine_device_initcall(ep88xc, declare_of_platform_devices);
define_machine(ep88xc) {
.name = "Embedded Planet EP88xC",

5
arch/powerpc/platforms/8xx/mpc86xads_setup.c
View File

@ -128,12 +128,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
static int __init declare_of_platform_devices(void)
{
if (machine_is(mpc86x_ads))
of_platform_bus_probe(NULL, of_bus_ids, NULL);
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
device_initcall(declare_of_platform_devices);
machine_device_initcall(mpc86x_ads, declare_of_platform_devices);
define_machine(mpc86x_ads) {
.name = "MPC86x ADS",

5
arch/powerpc/platforms/8xx/mpc885ads_setup.c
View File

@ -264,12 +264,11 @@ static struct of_device_id __initdata of_bus_ids[] = {
static int __init declare_of_platform_devices(void)
{
/* Publish the QE devices */
if (machine_is(mpc885_ads))
of_platform_bus_probe(NULL, of_bus_ids, NULL);
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
device_initcall(declare_of_platform_devices);
machine_device_initcall(mpc885_ads, declare_of_platform_devices);
define_machine(mpc885_ads) {
.name = "Freescale MPC885 ADS",

6
arch/powerpc/platforms/Kconfig
View File

@ -22,6 +22,7 @@ config PPC_83xx
depends on 6xx
select FSL_SOC
select 83xx
select IPIC
select WANT_DEVICE_TREE
config PPC_86xx
@ -80,6 +81,10 @@ config XICS
bool
default y
config IPIC
bool
default n
config MPIC
bool
default n
@ -265,6 +270,7 @@ config TAU_AVERAGE
config QUICC_ENGINE
bool
select PPC_LIB_RHEAP
select CRC32
help
The QUICC Engine (QE) is a new generation of communications
coprocessors on Freescale embedded CPUs (akin to CPM in older chips).

23
arch/powerpc/platforms/embedded6xx/Kconfig
View File

@ -9,6 +9,8 @@ config LINKSTATION
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select DEFAULT_UIMAGE
select MPC10X_OPENPIC
select MPC10X_BRIDGE
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
@ -16,6 +18,19 @@ config LINKSTATION
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
Terastation systems should be supported too.
config STORCENTER
bool "IOMEGA StorCenter"
depends on EMBEDDED6xx
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select WANT_DEVICE_TREE
select MPC10X_OPENPIC
select MPC10X_BRIDGE
help
Select STORCENTER if configuring for the iomega StorCenter
with an 8241 CPU in it.
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
depends on EMBEDDED6xx
@ -23,6 +38,7 @@ config MPC7448HPC2
select DEFAULT_UIMAGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
select TSI108_BRIDGE
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
@ -33,6 +49,7 @@ config PPC_HOLLY
select TSI108_BRIDGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
select TSI108_BRIDGE
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
@ -48,17 +65,13 @@ config PPC_PRPMC2800
config TSI108_BRIDGE
bool
depends on MPC7448HPC2 || PPC_HOLLY
select PCI
select MPIC
select MPIC_WEIRD
default y
config MPC10X_BRIDGE
bool
depends on LINKSTATION
select PPC_INDIRECT_PCI
default y
config MV64X60
bool
@ -67,8 +80,6 @@ config MV64X60
config MPC10X_OPENPIC
bool
depends on LINKSTATION
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"

1
arch/powerpc/platforms/embedded6xx/Makefile
View File

@ -3,5 +3,6 @@
#
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
obj-$(CONFIG_STORCENTER) += storcenter.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o

2
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
View File

@ -53,8 +53,6 @@
#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{

192
arch/powerpc/platforms/embedded6xx/storcenter.c 100644
View File

@ -0,0 +1,192 @@
/*
* Board setup routines for the storcenter
*
* Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
* Copyright 2007 Andy Wilcox, Jon Loeliger
*
* Based on linkstation.c by G. Liakhovetski
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of
* any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/mpic.h>
#include <asm/pci-bridge.h>
#include "mpc10x.h"
#ifdef CONFIG_MTD_PHYSMAP
static struct mtd_partition storcenter_physmap_partitions[] = {
{
.name = "kernel",
.offset = 0x000000,
.size = 0x170000,
},
{
.name = "rootfs",
.offset = 0x170000,
.size = 0x590000,
},
{
.name = "uboot",
.offset = 0x700000,
.size = 0x040000,
},
{
.name = "config",
.offset = 0x740000,
.size = 0x0c0000,
},
};
#endif
static __initdata struct of_device_id storcenter_of_bus[] = {
{ .name = "soc", },
{},
};
static int __init storcenter_device_probe(void)
{
of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
return 0;
}
machine_device_initcall(storcenter, storcenter_device_probe);
static int __init storcenter_add_bridge(struct device_node *dev)
{
#ifdef CONFIG_PCI
int len;
struct pci_controller *hose;
const int *bus_range;
printk("Adding PCI host bridge %s\n", dev->full_name);
hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
bus_range = of_get_property(dev, "bus-range", &len);
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, 1);
#endif
return 0;
}
static void __init storcenter_setup_arch(void)
{
struct device_node *np;
#ifdef CONFIG_MTD_PHYSMAP
physmap_set_partitions(storcenter_physmap_partitions,
ARRAY_SIZE(storcenter_physmap_partitions));
#endif
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
storcenter_add_bridge(np);
printk(KERN_INFO "IOMEGA StorCenter\n");
}
/*
* Interrupt setup and service. Interrrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
{
struct mpic *mpic;
struct device_node *dnp;
const void *prop;
int size;
phys_addr_t paddr;
dnp = of_find_node_by_type(NULL, "open-pic");
if (dnp == NULL)
return;
prop = of_get_property(dnp, "reg", &size);
if (prop == NULL) {
of_node_put(dnp);
return;
}
paddr = (phys_addr_t)of_translate_address(dnp, prop);
mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
4, 32, " EPIC ");
of_node_put(dnp);
BUG_ON(mpic == NULL);
/* PCI IRQs */
/*
* 2.6.12 patch:
* openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200);
* openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120);
* first_irq, num_irqs, __iomem first_ISR
* o_ss: i, src: 0, fdf50200
* o_ss: i, src: 1, fdf50220
* o_ss: i, src: 2, fdf50240
* o_ss: i, src: 3, fdf50260
* o_ss: i, src: 4, fdf50280
* o_ss: i, src: 5, fdf51120
* o_ss: i, src: 6, fdf51140
*/
mpic_assign_isu(mpic, 0, paddr + 0x10200);
mpic_assign_isu(mpic, 1, paddr + 0x10220);
mpic_assign_isu(mpic, 2, paddr + 0x10240);
mpic_assign_isu(mpic, 3, paddr + 0x10260);
mpic_assign_isu(mpic, 4, paddr + 0x10280);
mpic_assign_isu(mpic, 5, paddr + 0x11120);
mpic_assign_isu(mpic, 6, paddr + 0x11140);
mpic_init(mpic);
}
static void storcenter_restart(char *cmd)
{
local_irq_disable();
/* Set exception prefix high - to the firmware */
_nmask_and_or_msr(0, MSR_IP);
/* Wait for reset to happen */
for (;;) ;
}
static int __init storcenter_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "storcenter");
}
define_machine(storcenter){
.name = "IOMEGA StorCenter",
.probe = storcenter_probe,
.setup_arch = storcenter_setup_arch,
.init_IRQ = storcenter_init_IRQ,
.get_irq = mpic_get_irq,
.restart = storcenter_restart,
.calibrate_decr = generic_calibrate_decr,
};

3
arch/powerpc/sysdev/Makefile
View File

@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
@ -24,7 +25,7 @@ obj-$(CONFIG_AXON_RAM) += axonram.o
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_PPC_83xx) += ipic.o
obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
ifeq ($(CONFIG_PCI),y)

150
arch/powerpc/sysdev/fsl_pci.c
View File

@ -33,8 +33,8 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
struct ccsr_pci __iomem *pci;
int i;
pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start,
rsrc->end - rsrc->start + 1);
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
/* Disable all windows (except powar0 since its ignored) */
@ -46,17 +46,17 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
/* Setup outbound MEM window */
for(i = 0; i < 3; i++)
if (hose->mem_resources[i].flags & IORESOURCE_MEM){
pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n",
hose->mem_resources[i].start,
hose->mem_resources[i].end
- hose->mem_resources[i].start + 1);
out_be32(&pci->pow[i+1].potar,
(hose->mem_resources[i].start >> 12)
& 0x000fffff);
resource_size_t pci_addr_start =
hose->mem_resources[i].start -
hose->pci_mem_offset;
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
(u64)hose->mem_resources[i].start,
(u64)hose->mem_resources[i].end
- (u64)hose->mem_resources[i].start + 1);
out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
out_be32(&pci->pow[i+1].potear, 0);
out_be32(&pci->pow[i+1].powbar,
(hose->mem_resources[i].start >> 12)
& 0x000fffff);
(hose->mem_resources[i].start >> 12));
/* Enable, Mem R/W */
out_be32(&pci->pow[i+1].powar, 0x80044000
| (__ilog2(hose->mem_resources[i].end
@ -65,15 +65,14 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
/* Setup outbound IO window */
if (hose->io_resource.flags & IORESOURCE_IO){
pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
hose->io_resource.start,
hose->io_resource.end - hose->io_resource.start + 1,
hose->io_base_phys);
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12)
& 0x000fffff);
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
"phy base 0x%016llx.\n",
(u64)hose->io_resource.start,
(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
(u64)hose->io_base_phys);
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
out_be32(&pci->pow[i+1].potear, 0);
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12)
& 0x000fffff);
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
/* Enable, IO R/W */
out_be32(&pci->pow[i+1].powar, 0x80088000
| (__ilog2(hose->io_resource.end
@ -107,55 +106,17 @@ void __init setup_pci_cmd(struct pci_controller *hose)
}
}
static void __init quirk_fsl_pcie_transparent(struct pci_dev *dev)
{
struct resource *res;
int i, res_idx = PCI_BRIDGE_RESOURCES;
struct pci_controller *hose;
static int fsl_pcie_bus_fixup;
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
{
/* if we aren't a PCIe don't bother */
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
return ;
/*
* Make the bridge be transparent.
*/
dev->transparent = 1;
hose = pci_bus_to_host(dev->bus);
if (!hose) {
printk(KERN_ERR "Can't find hose for bus %d\n",
dev->bus->number);
return;
}
/* Clear out any of the virtual P2P bridge registers */
pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0);
pci_write_config_byte(dev, PCI_IO_BASE, 0x10);
pci_write_config_byte(dev, PCI_IO_LIMIT, 0);
pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10);
pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0);
pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0);
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
if (hose->io_resource.flags) {
res = &dev->resource[res_idx++];
res->start = hose->io_resource.start;
res->end = hose->io_resource.end;
res->flags = hose->io_resource.flags;
update_bridge_resource(dev, res);
}
for (i = 0; i < 3; i++) {
res = &dev->resource[res_idx + i];
res->start = hose->mem_resources[i].start;
res->end = hose->mem_resources[i].end;
res->flags = hose->mem_resources[i].flags;
update_bridge_resource(dev, res);
}
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
fsl_pcie_bus_fixup = 1;
return ;
}
int __init fsl_pcie_check_link(struct pci_controller *hose)
@ -172,11 +133,24 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
int i;
/* deal with bogus pci_bus when we don't have anything connected on PCIe */
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
if (bus->parent) {
for (i = 0; i < 4; ++i)
bus->resource[i] = bus->parent->resource[i];
if ((bus->parent == hose->bus) &&
((fsl_pcie_bus_fixup &&
early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
{
for (i = 0; i < 4; ++i) {
struct resource *res = bus->resource[i];
struct resource *par = bus->parent->resource[i];
if (res) {
res->start = 0;
res->end = 0;
res->flags = 0;
}
if (res && par) {
res->start = par->start;
res->end = par->end;
res->flags = par->flags;
}
}
}
}
@ -240,23 +214,23 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
return 0;
}
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);

0
arch/ppc/syslib/ppc85xx_rio.c → arch/powerpc/sysdev/fsl_rio.c
View File

0
arch/ppc/syslib/ppc85xx_rio.h → arch/powerpc/sysdev/fsl_rio.h
View File

103
arch/powerpc/sysdev/fsl_soc.c
View File

@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/spi/spi.h>
#include <linux/fsl_devices.h>
#include <linux/fs_enet_pd.h>
@ -54,10 +55,18 @@ phys_addr_t get_immrbase(void)
soc = of_find_node_by_type(NULL, "soc");
if (soc) {
int size;
const void *prop = of_get_property(soc, "reg", &size);
u32 naddr;
const u32 *prop = of_get_property(soc, "#address-cells", &size);
if (prop && size == 4)
naddr = *prop;
else
naddr = 2;
prop = of_get_property(soc, "ranges", &size);
if (prop)
immrbase = of_translate_address(soc, prop);
immrbase = of_translate_address(soc, prop + naddr);
of_node_put(soc);
}
@ -130,6 +139,37 @@ u32 get_baudrate(void)
EXPORT_SYMBOL(get_baudrate);
#endif /* CONFIG_CPM2 */
#ifdef CONFIG_FIXED_PHY
static int __init of_add_fixed_phys(void)
{
int ret;
struct device_node *np;
u32 *fixed_link;
struct fixed_phy_status status = {};
for_each_node_by_name(np, "ethernet") {
fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
if (!fixed_link)
continue;
status.link = 1;
status.duplex = fixed_link[1];
status.speed = fixed_link[2];
status.pause = fixed_link[3];
status.asym_pause = fixed_link[4];
ret = fixed_phy_add(PHY_POLL, fixed_link[0], &status);
if (ret) {
of_node_put(np);
return ret;
}
}
return 0;
}
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
static int __init gfar_mdio_of_init(void)
{
struct device_node *np = NULL;
@ -198,7 +238,6 @@ static const char *gfar_tx_intr = "tx";
static const char *gfar_rx_intr = "rx";
static const char *gfar_err_intr = "error";
static int __init gfar_of_init(void)
{
struct device_node *np;
@ -282,29 +321,43 @@ static int __init gfar_of_init(void)
gfar_data.interface = PHY_INTERFACE_MODE_MII;
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
if (ph == NULL) {
u32 *fixed_link;
if (phy == NULL) {
ret = -ENODEV;
goto unreg;
}
fixed_link = (u32 *)of_get_property(np, "fixed-link",
NULL);
if (!fixed_link) {
ret = -ENODEV;
goto unreg;
}
mdio = of_get_parent(phy);
gfar_data.bus_id = 0;
gfar_data.phy_id = fixed_link[0];
} else {
phy = of_find_node_by_phandle(*ph);
if (phy == NULL) {
ret = -ENODEV;
goto unreg;
}
mdio = of_get_parent(phy);
id = of_get_property(phy, "reg", NULL);
ret = of_address_to_resource(mdio, 0, &res);
if (ret) {
of_node_put(phy);
of_node_put(mdio);
goto unreg;
}
gfar_data.phy_id = *id;
gfar_data.bus_id = res.start;
id = of_get_property(phy, "reg", NULL);
ret = of_address_to_resource(mdio, 0, &res);
if (ret) {
of_node_put(phy);
of_node_put(mdio);
goto unreg;
}
gfar_data.phy_id = *id;
gfar_data.bus_id = res.start;
of_node_put(phy);
of_node_put(mdio);
ret =
platform_device_add_data(gfar_dev, &gfar_data,
sizeof(struct
@ -531,14 +584,12 @@ static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
static int __init fsl_usb_of_init(void)
{
struct device_node *np;
unsigned int i;
unsigned int i = 0;
struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
*usb_dev_dr_client = NULL;
int ret;
for (np = NULL, i = 0;
(np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL;
i++) {
for_each_compatible_node(np, NULL, "fsl-usb2-mph") {
struct resource r[2];
struct fsl_usb2_platform_data usb_data;
const unsigned char *prop = NULL;
@ -581,11 +632,10 @@ static int __init fsl_usb_of_init(void)
fsl_usb2_platform_data));
if (ret)
goto unreg_mph;
i++;
}
for (np = NULL;
(np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL;
i++) {
for_each_compatible_node(np, NULL, "fsl-usb2-dr") {
struct resource r[2];
struct fsl_usb2_platform_data usb_data;
const unsigned char *prop = NULL;
@ -657,6 +707,7 @@ static int __init fsl_usb_of_init(void)
fsl_usb2_platform_data))))
goto unreg_dr;
}
i++;
}
return 0;

62
arch/powerpc/sysdev/ipic.c
View File

@ -48,6 +48,13 @@ static struct ipic_info ipic_info[] = {
.bit = 17,
.prio_mask = 1,
},
[3] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
.force = IPIC_SIFCR_H,
.bit = 18,
.prio_mask = 2,
},
[4] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
@ -55,6 +62,34 @@ static struct ipic_info ipic_info[] = {
.bit = 19,
.prio_mask = 3,
},
[5] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
.force = IPIC_SIFCR_H,
.bit = 20,
.prio_mask = 4,
},
[6] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
.force = IPIC_SIFCR_H,
.bit = 21,
.prio_mask = 5,
},
[7] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
.force = IPIC_SIFCR_H,
.bit = 22,
.prio_mask = 6,
},
[8] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
.force = IPIC_SIFCR_H,
.bit = 23,
.prio_mask = 7,
},
[9] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_D,
@ -223,6 +258,20 @@ static struct ipic_info ipic_info[] = {
.bit = 7,
.prio_mask = 7,
},
[40] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
.force = IPIC_SIFCR_H,
.bit = 8,
.prio_mask = 0,
},
[41] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
.force = IPIC_SIFCR_H,
.bit = 9,
.prio_mask = 1,
},
[42] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
@ -230,6 +279,13 @@ static struct ipic_info ipic_info[] = {
.bit = 10,
.prio_mask = 2,
},
[43] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
.force = IPIC_SIFCR_H,
.bit = 11,
.prio_mask = 3,
},
[44] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
@ -387,6 +443,12 @@ static struct ipic_info ipic_info[] = {
.force = IPIC_SIFCR_L,
.bit = 18,
},
[83] = {
.mask = IPIC_SIMSR_L,
.prio = 0,
.force = IPIC_SIFCR_L,
.bit = 19,
},
[84] = {
.mask = IPIC_SIMSR_L,
.prio = 0,

4
arch/powerpc/sysdev/mpic.c
View File

@ -267,7 +267,7 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
*/
static void _mpic_map_mmio(struct mpic *mpic, unsigned long phys_addr,
static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
struct mpic_reg_bank *rb, unsigned int offset,
unsigned int size)
{
@ -287,7 +287,7 @@ static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
static inline void mpic_map(struct mpic *mpic, unsigned long phys_addr,
static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
struct mpic_reg_bank *rb, unsigned int offset,
unsigned int size)
{

2
arch/powerpc/sysdev/qe_lib/Kconfig
View File

@ -4,7 +4,7 @@
config UCC_SLOW
bool
default n
default y if SERIAL_QE
help
This option provides qe_lib support to UCC slow
protocols: UART, BISYNC, QMC

247
arch/powerpc/sysdev/qe_lib/qe.c
View File

@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/crc32.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
@ -394,3 +395,249 @@ void *qe_muram_addr(unsigned long offset)
return (void *)&qe_immr->muram[offset];
}
EXPORT_SYMBOL(qe_muram_addr);
/* The maximum number of RISCs we support */
#define MAX_QE_RISC 2
/* Firmware information stored here for qe_get_firmware_info() */
static struct qe_firmware_info qe_firmware_info;
/*
* Set to 1 if QE firmware has been uploaded, and therefore
* qe_firmware_info contains valid data.
*/
static int qe_firmware_uploaded;
/*
* Upload a QE microcode
*
* This function is a worker function for qe_upload_firmware(). It does
* the actual uploading of the microcode.
*/
static void qe_upload_microcode(const void *base,
const struct qe_microcode *ucode)
{
const __be32 *code = base + be32_to_cpu(ucode->code_offset);
unsigned int i;
if (ucode->major || ucode->minor || ucode->revision)
printk(KERN_INFO "qe-firmware: "
"uploading microcode '%s' version %u.%u.%u\n",
ucode->id, ucode->major, ucode->minor, ucode->revision);
else
printk(KERN_INFO "qe-firmware: "
"uploading microcode '%s'\n", ucode->id);
/* Use auto-increment */
out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
for (i = 0; i < be32_to_cpu(ucode->count); i++)
out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
}
/*
* Upload a microcode to the I-RAM at a specific address.
*
* See Documentation/powerpc/qe-firmware.txt for information on QE microcode
* uploading.
*
* Currently, only version 1 is supported, so the 'version' field must be
* set to 1.
*
* The SOC model and revision are not validated, they are only displayed for
* informational purposes.
*
* 'calc_size' is the calculated size, in bytes, of the firmware structure and
* all of the microcode structures, minus the CRC.
*
* 'length' is the size that the structure says it is, including the CRC.
*/
int qe_upload_firmware(const struct qe_firmware *firmware)
{
unsigned int i;
unsigned int j;
u32 crc;
size_t calc_size = sizeof(struct qe_firmware);
size_t length;
const struct qe_header *hdr;
if (!firmware) {
printk(KERN_ERR "qe-firmware: invalid pointer\n");
return -EINVAL;
}
hdr = &firmware->header;
length = be32_to_cpu(hdr->length);
/* Check the magic */
if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
(hdr->magic[2] != 'F')) {
printk(KERN_ERR "qe-firmware: not a microcode\n");
return -EPERM;
}
/* Check the version */
if (hdr->version != 1) {
printk(KERN_ERR "qe-firmware: unsupported version\n");
return -EPERM;
}
/* Validate some of the fields */
if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
printk(KERN_ERR "qe-firmware: invalid data\n");
return -EINVAL;
}
/* Validate the length and check if there's a CRC */
calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
for (i = 0; i < firmware->count; i++)
/*
* For situations where the second RISC uses the same microcode
* as the first, the 'code_offset' and 'count' fields will be
* zero, so it's okay to add those.
*/
calc_size += sizeof(__be32) *
be32_to_cpu(firmware->microcode[i].count);
/* Validate the length */
if (length != calc_size + sizeof(__be32)) {
printk(KERN_ERR "qe-firmware: invalid length\n");
return -EPERM;
}
/* Validate the CRC */
crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
if (crc != crc32(0, firmware, calc_size)) {
printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
return -EIO;
}
/*
* If the microcode calls for it, split the I-RAM.
*/
if (!firmware->split)
setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
if (firmware->soc.model)
printk(KERN_INFO
"qe-firmware: firmware '%s' for %u V%u.%u\n",
firmware->id, be16_to_cpu(firmware->soc.model),
firmware->soc.major, firmware->soc.minor);
else
printk(KERN_INFO "qe-firmware: firmware '%s'\n",
firmware->id);
/*
* The QE only supports one microcode per RISC, so clear out all the
* saved microcode information and put in the new.
*/
memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
strcpy(qe_firmware_info.id, firmware->id);
qe_firmware_info.extended_modes = firmware->extended_modes;
memcpy(qe_firmware_info.vtraps, firmware->vtraps,
sizeof(firmware->vtraps));
/* Loop through each microcode. */
for (i = 0; i < firmware->count; i++) {
const struct qe_microcode *ucode = &firmware->microcode[i];
/* Upload a microcode if it's present */
if (ucode->code_offset)
qe_upload_microcode(firmware, ucode);
/* Program the traps for this processor */
for (j = 0; j < 16; j++) {
u32 trap = be32_to_cpu(ucode->traps[j]);
if (trap)
out_be32(&qe_immr->rsp[i].tibcr[j], trap);
}
/* Enable traps */
out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
}
qe_firmware_uploaded = 1;
return 0;
}
EXPORT_SYMBOL(qe_upload_firmware);
/*
* Get info on the currently-loaded firmware
*
* This function also checks the device tree to see if the boot loader has
* uploaded a firmware already.
*/
struct qe_firmware_info *qe_get_firmware_info(void)
{
static int initialized;
struct property *prop;
struct device_node *qe;
struct device_node *fw = NULL;
const char *sprop;
unsigned int i;
/*
* If we haven't checked yet, and a driver hasn't uploaded a firmware
* yet, then check the device tree for information.
*/
if (initialized || qe_firmware_uploaded)
return NULL;
initialized = 1;
/*
* Newer device trees have an "fsl,qe" compatible property for the QE
* node, but we still need to support older device trees.
*/
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return NULL;
}
/* Find the 'firmware' child node */
for_each_child_of_node(qe, fw) {
if (strcmp(fw->name, "firmware") == 0)
break;
}
of_node_put(qe);
/* Did we find the 'firmware' node? */
if (!fw)
return NULL;
qe_firmware_uploaded = 1;
/* Copy the data into qe_firmware_info*/
sprop = of_get_property(fw, "id", NULL);
if (sprop)
strncpy(qe_firmware_info.id, sprop,
sizeof(qe_firmware_info.id) - 1);
prop = of_find_property(fw, "extended-modes", NULL);
if (prop && (prop->length == sizeof(u64))) {
const u64 *iprop = prop->value;
qe_firmware_info.extended_modes = *iprop;
}
prop = of_find_property(fw, "virtual-traps", NULL);
if (prop && (prop->length == 32)) {
const u32 *iprop = prop->value;
for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
qe_firmware_info.vtraps[i] = iprop[i];
}
of_node_put(fw);
return &qe_firmware_info;
}
EXPORT_SYMBOL(qe_get_firmware_info);

10
arch/powerpc/sysdev/qe_lib/ucc_slow.c
View File

@ -19,6 +19,7 @@
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
@ -41,6 +42,7 @@ u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
default: return QE_CR_SUBBLOCK_INVALID;
}
}
EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
{
@ -56,6 +58,7 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
{
@ -65,6 +68,7 @@ void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
EXPORT_SYMBOL(ucc_slow_stop_tx);
void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
{
@ -74,6 +78,7 @@ void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
EXPORT_SYMBOL(ucc_slow_restart_tx);
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
{
@ -94,6 +99,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
}
out_be32(&us_regs->gumr_l, gumr_l);
}
EXPORT_SYMBOL(ucc_slow_enable);
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
{
@ -114,6 +120,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
}
out_be32(&us_regs->gumr_l, gumr_l);
}
EXPORT_SYMBOL(ucc_slow_disable);
/* Initialize the UCC for Slow operations
*
@ -347,6 +354,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
*uccs_ret = uccs;
return 0;
}
EXPORT_SYMBOL(ucc_slow_init);
void ucc_slow_free(struct ucc_slow_private * uccs)
{
@ -366,5 +374,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
kfree(uccs);
}
EXPORT_SYMBOL(ucc_slow_free);

1
arch/ppc/kernel/Makefile
View File

@ -13,7 +13,6 @@ obj-y := entry.o traps.o time.o misc.o \
ppc_htab.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KGDB) += ppc-stub.o
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o

3
arch/ppc/platforms/85xx/mpc85xx_ads_common.c
View File

@ -42,8 +42,6 @@
#include <mm/mmu_decl.h>
#include <syslib/ppc85xx_rio.h>
#include <platforms/85xx/mpc85xx_ads_common.h>
#ifndef CONFIG_PCI
@ -190,6 +188,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
extern void mpc85xx_rio_setup(int law_start, int law_size);
void platform_rio_init(void)
{
/* 512MB RIO LAW at 0xc0000000 */

2
arch/ppc/platforms/85xx/stx_gp3.c
View File

@ -54,7 +54,6 @@
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_rio.h>
unsigned char __res[sizeof(bd_t)];
@ -270,6 +269,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
extern void mpc85xx_rio_setup(int law_start, int law_size);
void
platform_rio_init(void)
{

2
arch/ppc/platforms/85xx/tqm85xx.c
View File

@ -54,7 +54,6 @@
#include <syslib/ppc85xx_setup.h>
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_rio.h>
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
@ -309,6 +308,7 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
extern void mpc85xx_rio_setup(int law_start, int law_size);
void platform_rio_init(void)
{
/* 512MB RIO LAW at 0xc0000000 */

1
arch/ppc/syslib/Makefile
View File

@ -93,7 +93,6 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += pci_auto.o
endif
obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o
obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \
mpc83xx_sys.o mpc83xx_devices.o ipic.o
ifeq ($(CONFIG_83xx),y)

9
drivers/net/fs_enet/fs_enet-main.c
View File

@ -1178,8 +1178,15 @@ static int __devinit find_phy(struct device_node *np,
struct device_node *phynode, *mdionode;
struct resource res;
int ret = 0, len;
const u32 *data;
const u32 *data = of_get_property(np, "phy-handle", &len);
data = of_get_property(np, "fixed-link", NULL);
if (data) {
snprintf(fpi->bus_id, 16, PHY_ID_FMT, 0, *data);
return 0;
}
data = of_get_property(np, "phy-handle", &len);
if (!data || len != 4)
return -EINVAL;

30
drivers/net/phy/Kconfig
View File

@ -61,34 +61,12 @@ config ICPLUS_PHY
Currently supports the IP175C PHY.
config FIXED_PHY
tristate "Drivers for PHY emulation on fixed speed/link"
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
---help---
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
but with the ability to manipulate the speed/link in software. The relevant MII
speed/duplex parameters could be effectively handled in a user-specified function.
Currently tested with mpc866ads.
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
config FIXED_MII_10_FDX
bool "Emulation for 10M Fdx fixed PHY behavior"
depends on FIXED_PHY
config FIXED_MII_100_FDX
bool "Emulation for 100M Fdx fixed PHY behavior"
depends on FIXED_PHY
config FIXED_MII_1000_FDX
bool "Emulation for 1000M Fdx fixed PHY behavior"
depends on FIXED_PHY
config FIXED_MII_AMNT
int "Number of emulated PHYs to allocate "
depends on FIXED_PHY
default "1"
---help---
Sometimes it is required to have several independent emulated
PHYs on the bus (in case of multi-eth but phy-less HW for instance).
This control will have specified number allocated for each fixed
PHY type enabled.
Currently tested with mpc866ads and mpc8349e-mitx.
config MDIO_BITBANG
tristate "Support for bitbanged MDIO buses"

507
drivers/net/phy/fixed.c
View File

@ -1,362 +1,253 @@
/*
* drivers/net/phy/fixed.c
* Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
*
* Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* Author: Vitaly Bordug
*
* Copyright (c) 2006 MontaVista Software, Inc.
* Copyright (c) 2006-2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#define MII_REGS_NUM 29
/* we need to track the allocated pointers in order to free them on exit */
static struct fixed_info *fixed_phy_ptrs[CONFIG_FIXED_MII_AMNT*MAX_PHY_AMNT];
struct fixed_mdio_bus {
int irqs[PHY_MAX_ADDR];
struct mii_bus mii_bus;
struct list_head phys;
};
/*-----------------------------------------------------------------------------
* If something weird is required to be done with link/speed,
* network driver is able to assign a function to implement this.
* May be useful for PHY's that need to be software-driven.
*-----------------------------------------------------------------------------*/
int fixed_mdio_set_link_update(struct phy_device *phydev,
int (*link_update) (struct net_device *,
struct fixed_phy_status *))
struct fixed_phy {
int id;
u16 regs[MII_REGS_NUM];
struct phy_device *phydev;
struct fixed_phy_status status;
int (*link_update)(struct net_device *, struct fixed_phy_status *);
struct list_head node;
};
static struct platform_device *pdev;
static struct fixed_mdio_bus platform_fmb = {
.phys = LIST_HEAD_INIT(platform_fmb.phys),
};
static int fixed_phy_update_regs(struct fixed_phy *fp)
{
struct fixed_info *fixed;
if (link_update == NULL)
return -EINVAL;
if (phydev) {
if (phydev->bus) {
fixed = phydev->bus->priv;
fixed->link_update = link_update;
return 0;
}
}
return -EINVAL;
}
EXPORT_SYMBOL(fixed_mdio_set_link_update);
struct fixed_info *fixed_mdio_get_phydev (int phydev_ind)
{
if (phydev_ind >= MAX_PHY_AMNT)
return NULL;
return fixed_phy_ptrs[phydev_ind];
}
EXPORT_SYMBOL(fixed_mdio_get_phydev);
/*-----------------------------------------------------------------------------
* This is used for updating internal mii regs from the status
*-----------------------------------------------------------------------------*/
#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
static int fixed_mdio_update_regs(struct fixed_info *fixed)
{
u16 *regs = fixed->regs;
u16 bmsr = 0;
u16 bmsr = BMSR_ANEGCAPABLE;
u16 bmcr = 0;
u16 lpagb = 0;
u16 lpa = 0;
if (!regs) {
printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
return -EINVAL;
}
if (fixed->phy_status.link)
bmsr |= BMSR_LSTATUS;
if (fixed->phy_status.duplex) {
if (fp->status.duplex) {
bmcr |= BMCR_FULLDPLX;
switch (fixed->phy_status.speed) {
switch (fp->status.speed) {
case 1000:
bmsr |= BMSR_ESTATEN;
bmcr |= BMCR_SPEED1000;
lpagb |= LPA_1000FULL;
break;
case 100:
bmsr |= BMSR_100FULL;
bmcr |= BMCR_SPEED100;
lpa |= LPA_100FULL;
break;
case 10:
bmsr |= BMSR_10FULL;
lpa |= LPA_10FULL;
break;
default:
printk(KERN_WARNING "fixed phy: unknown speed\n");
return -EINVAL;
}
} else {
switch (fixed->phy_status.speed) {
switch (fp->status.speed) {
case 1000:
bmsr |= BMSR_ESTATEN;
bmcr |= BMCR_SPEED1000;
lpagb |= LPA_1000HALF;
break;
case 100:
bmsr |= BMSR_100HALF;
bmcr |= BMCR_SPEED100;
lpa |= LPA_100HALF;
break;
case 10:
bmsr |= BMSR_100HALF;
bmsr |= BMSR_10HALF;
lpa |= LPA_10HALF;
break;
default:
printk(KERN_WARNING "fixed phy: unknown speed\n");
return -EINVAL;
}
}
regs[MII_BMCR] = bmcr;
regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx */
if (fp->status.link)
bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
if (fp->status.pause)
lpa |= LPA_PAUSE_CAP;
if (fp->status.asym_pause)
lpa |= LPA_PAUSE_ASYM;
fp->regs[MII_PHYSID1] = fp->id >> 16;
fp->regs[MII_PHYSID2] = fp->id;
fp->regs[MII_BMSR] = bmsr;
fp->regs[MII_BMCR] = bmcr;
fp->regs[MII_LPA] = lpa;
fp->regs[MII_STAT1000] = lpagb;
return 0;
}
static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
{
struct fixed_info *fixed = bus->priv;
struct fixed_mdio_bus *fmb = container_of(bus, struct fixed_mdio_bus,
mii_bus);
struct fixed_phy *fp;
/* if user has registered link update callback, use it */
if (fixed->phydev)
if (fixed->phydev->attached_dev) {
if (fixed->link_update) {
fixed->link_update(fixed->phydev->attached_dev,
&fixed->phy_status);
fixed_mdio_update_regs(fixed);
}
}
if ((unsigned int)location >= fixed->regs_num)
if (reg_num >= MII_REGS_NUM)
return -1;
return fixed->regs[location];
}
static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location,
u16 val)
{
/* do nothing for now */
return 0;
}
static int fixed_mii_reset(struct mii_bus *bus)
{
/*nothing here - no way/need to reset it */
return 0;
}
#endif
static int fixed_config_aneg(struct phy_device *phydev)
{
/* :TODO:03/13/2006 09:45:37 PM::
The full autoneg funcionality can be emulated,
but no need to have anything here for now
*/
return 0;
}
/*-----------------------------------------------------------------------------
* the manual bind will do the magic - with phy_id_mask == 0
* match will never return true...
*-----------------------------------------------------------------------------*/
static struct phy_driver fixed_mdio_driver = {
.name = "Fixed PHY",
#ifdef CONFIG_FIXED_MII_1000_FDX
.features = PHY_GBIT_FEATURES,
#else
.features = PHY_BASIC_FEATURES,
#endif
.config_aneg = fixed_config_aneg,
.read_status = genphy_read_status,
.driver = { .owner = THIS_MODULE, },
};
static void fixed_mdio_release(struct device *dev)
{
struct phy_device *phydev = container_of(dev, struct phy_device, dev);
struct mii_bus *bus = phydev->bus;
struct fixed_info *fixed = bus->priv;
kfree(phydev);
kfree(bus->dev);
kfree(bus);
kfree(fixed->regs);
kfree(fixed);
}
/*-----------------------------------------------------------------------------
* This func is used to create all the necessary stuff, bind
* the fixed phy driver and register all it on the mdio_bus_type.
* speed is either 10 or 100 or 1000, duplex is boolean.
* number is used to create multiple fixed PHYs, so that several devices can
* utilize them simultaneously.
*
* The device on mdio bus will look like [bus_id]:[phy_id],
* bus_id = number
* phy_id = speed+duplex.
*-----------------------------------------------------------------------------*/
#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
struct fixed_info *fixed_mdio_register_device(
int bus_id, int speed, int duplex, u8 phy_id)
{
struct mii_bus *new_bus;
struct fixed_info *fixed;
struct phy_device *phydev;
int err;
struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL);
if (dev == NULL)
goto err_dev_alloc;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (new_bus == NULL)
goto err_bus_alloc;
fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
if (fixed == NULL)
goto err_fixed_alloc;
fixed->regs = kzalloc(MII_REGS_NUM * sizeof(int), GFP_KERNEL);
if (NULL == fixed->regs)
goto err_fixed_regs_alloc;
fixed->regs_num = MII_REGS_NUM;
fixed->phy_status.speed = speed;
fixed->phy_status.duplex = duplex;
fixed->phy_status.link = 1;
new_bus->name = "Fixed MII Bus";
new_bus->read = &fixed_mii_read;
new_bus->write = &fixed_mii_write;
new_bus->reset = &fixed_mii_reset;
/*set up workspace */
fixed_mdio_update_regs(fixed);
new_bus->priv = fixed;
new_bus->dev = dev;
dev_set_drvdata(dev, new_bus);
/* create phy_device and register it on the mdio bus */
phydev = phy_device_create(new_bus, 0, 0);
if (phydev == NULL)
goto err_phy_dev_create;
/*
* Put the phydev pointer into the fixed pack so that bus read/write
* code could be able to access for instance attached netdev. Well it
* doesn't have to do so, only in case of utilizing user-specified
* link-update...
*/
fixed->phydev = phydev;
phydev->speed = speed;
phydev->duplex = duplex;
phydev->irq = PHY_IGNORE_INTERRUPT;
phydev->dev.bus = &mdio_bus_type;
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
PHY_ID_FMT, bus_id, phy_id);
phydev->bus = new_bus;
phydev->dev.driver = &fixed_mdio_driver.driver;
phydev->dev.release = fixed_mdio_release;
err = phydev->dev.driver->probe(&phydev->dev);
if (err < 0) {
printk(KERN_ERR "Phy %s: problems with fixed driver\n",
phydev->dev.bus_id);
goto err_out;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->id == phy_id) {
/* Issue callback if user registered it. */
if (fp->link_update) {
fp->link_update(fp->phydev->attached_dev,
&fp->status);
fixed_phy_update_regs(fp);
}
return fp->regs[reg_num];
}
}
err = device_register(&phydev->dev);
if (err) {
printk(KERN_ERR "Phy %s failed to register\n",
phydev->dev.bus_id);
goto err_out;
}
//phydev->state = PHY_RUNNING; /* make phy go up quick, but in 10Mbit/HDX
return fixed;
err_out:
kfree(phydev);
err_phy_dev_create:
kfree(fixed->regs);
err_fixed_regs_alloc:
kfree(fixed);
err_fixed_alloc:
kfree(new_bus);
err_bus_alloc:
kfree(dev);
err_dev_alloc:
return NULL;
return 0xFFFF;
}
#endif
MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
u16 val)
{
return 0;
}
/*
* If something weird is required to be done with link/speed,
* network driver is able to assign a function to implement this.
* May be useful for PHY's that need to be software-driven.
*/
int fixed_phy_set_link_update(struct phy_device *phydev,
int (*link_update)(struct net_device *,
struct fixed_phy_status *))
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
if (!link_update || !phydev || !phydev->bus)
return -EINVAL;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->id == phydev->phy_id) {
fp->link_update = link_update;
fp->phydev = phydev;
return 0;
}
}
return -ENOENT;
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
int fixed_phy_add(unsigned int irq, int phy_id,
struct fixed_phy_status *status)
{
int ret;
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
fmb->irqs[phy_id] = irq;
fp->id = phy_id;
fp->status = *status;
ret = fixed_phy_update_regs(fp);
if (ret)
goto err_regs;
list_add_tail(&fp->node, &fmb->phys);
return 0;
err_regs:
kfree(fp);
return ret;
}
EXPORT_SYMBOL_GPL(fixed_phy_add);
static int __init fixed_mdio_bus_init(void)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
int ret;
pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
if (!pdev) {
ret = -ENOMEM;
goto err_pdev;
}
fmb->mii_bus.id = 0;
fmb->mii_bus.name = "Fixed MDIO Bus";
fmb->mii_bus.dev = &pdev->dev;
fmb->mii_bus.read = &fixed_mdio_read;
fmb->mii_bus.write = &fixed_mdio_write;
fmb->mii_bus.irq = fmb->irqs;
ret = mdiobus_register(&fmb->mii_bus);
if (ret)
goto err_mdiobus_reg;
return 0;
err_mdiobus_reg:
platform_device_unregister(pdev);
err_pdev:
return ret;
}
module_init(fixed_mdio_bus_init);
static void __exit fixed_mdio_bus_exit(void)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
mdiobus_unregister(&fmb->mii_bus);
platform_device_unregister(pdev);
list_for_each_entry(fp, &fmb->phys, node) {
list_del(&fp->node);
kfree(fp);
}
}
module_exit(fixed_mdio_bus_exit);
MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
MODULE_AUTHOR("Vitaly Bordug");
MODULE_LICENSE("GPL");
static int __init fixed_init(void)
{
int cnt = 0;
int i;
/* register on the bus... Not expected to be matched
* with anything there...
*
*/
phy_driver_register(&fixed_mdio_driver);
/* We will create several mdio devices here, and will bound the upper
* driver to them.
*
* Then the external software can lookup the phy bus by searching
* for 0:101, to be connected to the virtual 100M Fdx phy.
*
* In case several virtual PHYs required, the bus_id will be in form
* [num]:[duplex]+[speed], which make it able even to define
* driver-specific link control callback, if for instance PHY is
* completely SW-driven.
*/
for (i=1; i <= CONFIG_FIXED_MII_AMNT; i++) {
#ifdef CONFIG_FIXED_MII_1000_FDX
fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(0, 1000, 1, i);
#endif
#ifdef CONFIG_FIXED_MII_100_FDX
fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(1, 100, 1, i);
#endif
#ifdef CONFIG_FIXED_MII_10_FDX
fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(2, 10, 1, i);
#endif
}
return 0;
}
static void __exit fixed_exit(void)
{
int i;
phy_driver_unregister(&fixed_mdio_driver);
for (i=0; i < MAX_PHY_AMNT; i++)
if ( fixed_phy_ptrs[i] )
device_unregister(&fixed_phy_ptrs[i]->phydev->dev);
}
module_init(fixed_init);
module_exit(fixed_exit);

5
drivers/rapidio/rio.c
View File

@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include "rio.h"
@ -476,8 +477,8 @@ int rio_init_mports(void)
port->iores.end - port->iores.start,
port->name)) {
printk(KERN_ERR
"RIO: Error requesting master port region %8.8lx-%8.8lx\n",
port->iores.start, port->iores.end - 1);
"RIO: Error requesting master port region 0x%016llx-0x%016llx\n",
(u64)port->iores.start, (u64)port->iores.end - 1);
rc = -ENOMEM;
goto out;
}

10
drivers/serial/Kconfig
View File

@ -1284,4 +1284,14 @@ config SERIAL_OF_PLATFORM
Currently, only 8250 compatible ports are supported, but
others can easily be added.
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE
select SERIAL_CORE
select FW_LOADER
default n
help
This driver supports the QE serial ports on Freescale embedded
PowerPC that contain a QUICC Engine.
endmenu

1
drivers/serial/Makefile
View File

@ -64,3 +64,4 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o

2
drivers/serial/cpm_uart/cpm_uart_cpm2.c
View File

@ -165,9 +165,9 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
* really has to get out of the driver so boards can
* be supported in a sane fashion.
*/
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
#ifndef CONFIG_STX_GP3
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;

1514
drivers/serial/ucc_uart.c 100644
View File

File diff suppressed because it is too large Load Diff

34
include/asm-powerpc/immap_qe.h
View File

@ -393,9 +393,39 @@ struct dbg {
u8 res2[0x48];
} __attribute__ ((packed));
/* RISC Special Registers (Trap and Breakpoint) */
/*
* RISC Special Registers (Trap and Breakpoint). These are described in
* the QE Developer's Handbook.
*/
struct rsp {
u32 reg[0x40]; /* 64 32-bit registers */
__be32 tibcr[16]; /* Trap/instruction breakpoint control regs */
u8 res0[64];
__be32 ibcr0;
__be32 ibs0;
__be32 ibcnr0;
u8 res1[4];
__be32 ibcr1;
__be32 ibs1;
__be32 ibcnr1;
__be32 npcr;
__be32 dbcr;
__be32 dbar;
__be32 dbamr;
__be32 dbsr;
__be32 dbcnr;
u8 res2[12];
__be32 dbdr_h;
__be32 dbdr_l;
__be32 dbdmr_h;
__be32 dbdmr_l;
__be32 bsr;
__be32 bor;
__be32 bior;
u8 res3[4];
__be32 iatr[4];
__be32 eccr; /* Exception control configuration register */
__be32 eicr;
u8 res4[0x100-0xf8];
} __attribute__ ((packed));
struct qe_immap {

Some files were not shown because too many files have changed in this diff Show More