regulator: act8865: Add act8600 support
This patch adds act8600 support to the act8865 driver. VBUS and USB charger supported by this chip can be added later Tested on MIPS Creator CI20 Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Mark Brown <broonie@kernel.org>hifive-unleashed-5.1
Zubair Lutfullah Kakakhel
Mark Brown
parent
c517d838eb
commit
df3a950e4e
|
|
@ -2,7 +2,7 @@ ACT88xx regulators
|
|||
-------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: "active-semi,act8846" or "active-semi,act8865"
|
||||
- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
|
||||
- reg: I2C slave address
|
||||
|
||||
Optional properties:
|
||||
|
|
@ -16,6 +16,9 @@ The valid names for regulators are:
|
|||
REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
|
||||
- for act8865:
|
||||
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
|
||||
- for act8600:
|
||||
DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
|
||||
LDO_REG8, LDO_REG9, LDO_REG10,
|
||||
|
||||
Example:
|
||||
--------
|
||||
|
|
|
|||
|
|
@ -28,6 +28,35 @@
|
|||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
/*
|
||||
* ACT8600 Global Register Map.
|
||||
*/
|
||||
#define ACT8600_SYS_MODE 0x00
|
||||
#define ACT8600_SYS_CTRL 0x01
|
||||
#define ACT8600_DCDC1_VSET 0x10
|
||||
#define ACT8600_DCDC1_CTRL 0x12
|
||||
#define ACT8600_DCDC2_VSET 0x20
|
||||
#define ACT8600_DCDC2_CTRL 0x22
|
||||
#define ACT8600_DCDC3_VSET 0x30
|
||||
#define ACT8600_DCDC3_CTRL 0x32
|
||||
#define ACT8600_SUDCDC4_VSET 0x40
|
||||
#define ACT8600_SUDCDC4_CTRL 0x41
|
||||
#define ACT8600_LDO5_VSET 0x50
|
||||
#define ACT8600_LDO5_CTRL 0x51
|
||||
#define ACT8600_LDO6_VSET 0x60
|
||||
#define ACT8600_LDO6_CTRL 0x61
|
||||
#define ACT8600_LDO7_VSET 0x70
|
||||
#define ACT8600_LDO7_CTRL 0x71
|
||||
#define ACT8600_LDO8_VSET 0x80
|
||||
#define ACT8600_LDO8_CTRL 0x81
|
||||
#define ACT8600_LDO910_CTRL 0x91
|
||||
#define ACT8600_APCH0 0xA1
|
||||
#define ACT8600_APCH1 0xA8
|
||||
#define ACT8600_APCH2 0xA9
|
||||
#define ACT8600_APCH_STAT 0xAA
|
||||
#define ACT8600_OTG0 0xB0
|
||||
#define ACT8600_OTG1 0xB2
|
||||
|
||||
/*
|
||||
* ACT8846 Global Register Map.
|
||||
*/
|
||||
|
|
@ -94,10 +123,15 @@
|
|||
#define ACT8865_ENA 0x80 /* ON - [7] */
|
||||
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
|
||||
|
||||
|
||||
#define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
|
||||
#define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
|
||||
|
||||
/*
|
||||
* ACT8865 voltage number
|
||||
*/
|
||||
#define ACT8865_VOLTAGE_NUM 64
|
||||
#define ACT8600_SUDCDC_VOLTAGE_NUM 255
|
||||
|
||||
struct act8865 {
|
||||
struct regmap *regmap;
|
||||
|
|
@ -116,6 +150,13 @@ static const struct regulator_linear_range act8865_voltage_ranges[] = {
|
|||
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
|
||||
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
|
||||
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
|
||||
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
|
||||
};
|
||||
|
||||
static struct regulator_ops act8865_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
|
|
@ -126,6 +167,12 @@ static struct regulator_ops act8865_ops = {
|
|||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
static struct regulator_ops act8865_ldo_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
#define ACT88xx_REG(_name, _family, _id, _vsel_reg) \
|
||||
[_family##_ID_##_id] = { \
|
||||
.name = _name, \
|
||||
|
|
@ -142,6 +189,52 @@ static struct regulator_ops act8865_ops = {
|
|||
.owner = THIS_MODULE, \
|
||||
}
|
||||
|
||||
static const struct regulator_desc act8600_regulators[] = {
|
||||
ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET),
|
||||
ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET),
|
||||
ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET),
|
||||
{
|
||||
.name = "SUDCDC_REG4",
|
||||
.id = ACT8600_ID_SUDCDC4,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM,
|
||||
.linear_ranges = act8600_sudcdc_voltage_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges),
|
||||
.vsel_reg = ACT8600_SUDCDC4_VSET,
|
||||
.vsel_mask = ACT8600_SUDCDC_VSEL_MASK,
|
||||
.enable_reg = ACT8600_SUDCDC4_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
ACT88xx_REG("LDO5", ACT8600, LDO5, VSET),
|
||||
ACT88xx_REG("LDO6", ACT8600, LDO6, VSET),
|
||||
ACT88xx_REG("LDO7", ACT8600, LDO7, VSET),
|
||||
ACT88xx_REG("LDO8", ACT8600, LDO8, VSET),
|
||||
{
|
||||
.name = "LDO_REG9",
|
||||
.id = ACT8600_ID_LDO9,
|
||||
.ops = &act8865_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = 1,
|
||||
.fixed_uV = 1800000,
|
||||
.enable_reg = ACT8600_LDO910_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG10",
|
||||
.id = ACT8600_ID_LDO10,
|
||||
.ops = &act8865_ldo_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = 1,
|
||||
.fixed_uV = 1200000,
|
||||
.enable_reg = ACT8600_LDO910_CTRL,
|
||||
.enable_mask = ACT8600_LDO10_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct regulator_desc act8846_regulators[] = {
|
||||
ACT88xx_REG("REG1", ACT8846, REG1, VSET),
|
||||
ACT88xx_REG("REG2", ACT8846, REG2, VSET0),
|
||||
|
|
@ -169,6 +262,7 @@ static const struct regulator_desc act8865_regulators[] = {
|
|||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id act8865_dt_ids[] = {
|
||||
{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
|
||||
{ .compatible = "active-semi,act8846", .data = (void *)ACT8846 },
|
||||
{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
|
||||
{ }
|
||||
|
|
@ -200,6 +294,19 @@ static struct of_regulator_match act8865_matches[] = {
|
|||
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
|
||||
};
|
||||
|
||||
static struct of_regulator_match act8600_matches[] = {
|
||||
[ACT8600_ID_DCDC1] = { .name = "DCDC_REG1"},
|
||||
[ACT8600_ID_DCDC2] = { .name = "DCDC_REG2"},
|
||||
[ACT8600_ID_DCDC3] = { .name = "DCDC_REG3"},
|
||||
[ACT8600_ID_SUDCDC4] = { .name = "SUDCDC_REG4"},
|
||||
[ACT8600_ID_LDO5] = { .name = "LDO_REG5"},
|
||||
[ACT8600_ID_LDO6] = { .name = "LDO_REG6"},
|
||||
[ACT8600_ID_LDO7] = { .name = "LDO_REG7"},
|
||||
[ACT8600_ID_LDO8] = { .name = "LDO_REG8"},
|
||||
[ACT8600_ID_LDO9] = { .name = "LDO_REG9"},
|
||||
[ACT8600_ID_LDO10] = { .name = "LDO_REG10"},
|
||||
};
|
||||
|
||||
static int act8865_pdata_from_dt(struct device *dev,
|
||||
struct device_node **of_node,
|
||||
struct act8865_platform_data *pdata,
|
||||
|
|
@ -217,6 +324,10 @@ static int act8865_pdata_from_dt(struct device *dev,
|
|||
}
|
||||
|
||||
switch (type) {
|
||||
case ACT8600:
|
||||
matches = act8600_matches;
|
||||
num_matches = ARRAY_SIZE(act8600_matches);
|
||||
break;
|
||||
case ACT8846:
|
||||
matches = act8846_matches;
|
||||
num_matches = ARRAY_SIZE(act8846_matches);
|
||||
|
|
@ -317,6 +428,12 @@ static int act8865_pmic_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
switch (type) {
|
||||
case ACT8600:
|
||||
regulators = act8600_regulators;
|
||||
num_regulators = ARRAY_SIZE(act8600_regulators);
|
||||
off_reg = -1;
|
||||
off_mask = -1;
|
||||
break;
|
||||
case ACT8846:
|
||||
regulators = act8846_regulators;
|
||||
num_regulators = ARRAY_SIZE(act8846_regulators);
|
||||
|
|
@ -366,7 +483,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
if (of_device_is_system_power_controller(dev->of_node)) {
|
||||
if (!pm_power_off) {
|
||||
if (!pm_power_off && (off_reg > 0)) {
|
||||
act8865_i2c_client = client;
|
||||
act8865->off_reg = off_reg;
|
||||
act8865->off_mask = off_mask;
|
||||
|
|
@ -402,6 +519,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
static const struct i2c_device_id act8865_ids[] = {
|
||||
{ .name = "act8600", .driver_data = ACT8600 },
|
||||
{ .name = "act8846", .driver_data = ACT8846 },
|
||||
{ .name = "act8865", .driver_data = ACT8865 },
|
||||
{ },
|
||||
|
|
|
|||
|
|
@ -18,6 +18,19 @@
|
|||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
enum {
|
||||
ACT8600_ID_DCDC1,
|
||||
ACT8600_ID_DCDC2,
|
||||
ACT8600_ID_DCDC3,
|
||||
ACT8600_ID_SUDCDC4,
|
||||
ACT8600_ID_LDO5,
|
||||
ACT8600_ID_LDO6,
|
||||
ACT8600_ID_LDO7,
|
||||
ACT8600_ID_LDO8,
|
||||
ACT8600_ID_LDO9,
|
||||
ACT8600_ID_LDO10,
|
||||
};
|
||||
|
||||
enum {
|
||||
ACT8865_ID_DCDC1,
|
||||
ACT8865_ID_DCDC2,
|
||||
|
|
@ -46,6 +59,7 @@ enum {
|
|||
};
|
||||
|
||||
enum {
|
||||
ACT8600,
|
||||
ACT8865,
|
||||
ACT8846,
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue