1
0
Fork 0

ARM: dts: cm-t3x: add NAND support

CM-T3517, CM-T3530 and CM-T3730 features NAND storage chip connected to
GPMC bus.

Add GPMC DT entry into the root DT file omap3-cm-t3x.dtsi, common for
all three modules.

NAND timings are calculated to be safe for CM-T3x devices as it works
now in non DT boot (in this case the timings are updated by U-Boot).

Update GPMC ranges in boards DT files to include all connected devices.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
hifive-unleashed-5.1
Dmitry Lifshitz 2014-12-28 16:30:49 +02:00 committed by Tony Lindgren
parent 7a03f2c08d
commit df73b7f842
5 changed files with 70 additions and 10 deletions

View File

@ -259,3 +259,61 @@
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
&gpmc {
ranges = <0 0 0x00000000 0x01000000>;
nand@0,0 {
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <8>;
gpmc,device-width = <1>;
ti,nand-ecc-opt = "sw";
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <120>;
gpmc,cs-wr-off-ns = <120>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <120>;
gpmc,adv-wr-off-ns = <120>;
gpmc,we-on-ns = <6>;
gpmc,we-off-ns = <90>;
gpmc,oe-on-ns = <6>;
gpmc,oe-off-ns = <90>;
gpmc,page-burst-access-ns = <6>;
gpmc,access-ns = <72>;
gpmc,cycle2cycle-delay-ns = <60>;
gpmc,rd-cycle-ns = <120>;
gpmc,wr-cycle-ns = <120>;
gpmc,wr-access-ns = <186>;
gpmc,wr-data-mux-bus-ns = <90>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "xloader";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
partition@0x260000 {
label = "uboot environment";
reg = <0x260000 0x40000>;
};
partition@0x2a0000 {
label = "linux";
reg = <0x2a0000 0x400000>;
};
partition@0x6a0000 {
label = "rootfs";
reg = <0x6a0000 0x1f880000>;
};
};
};

View File

@ -50,7 +50,8 @@
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
<0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
smsc1: ethernet@gpmc {
compatible = "smsc,lan9221", "smsc,lan9115";

View File

@ -69,3 +69,7 @@
};
};
&gpmc {
ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
<0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
};

View File

@ -26,14 +26,10 @@
};
};
/*
* The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
* SB-T35 baseboard respectively.
* This setting includes both chips in SBC-T3530 board device tree.
*/
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
<4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
<0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
};
&mmc1 {

View File

@ -27,8 +27,9 @@
};
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
<4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
<0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
};
&dss {