gma500: oaktrail_hdmi: drop dead code

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit is contained in:
Kirill A. Shutemov 2012-03-08 16:12:28 +00:00 committed by Dave Airlie
parent 4398e58c5f
commit e1bb07cbe1

View file

@ -125,59 +125,6 @@ static const struct oaktrail_hdmi_limit oaktrail_hdmi_limit = {
.nf = { .min = NF_MIN, .max = NF_MAX },
};
static void wait_for_vblank(struct drm_device *dev)
{
/* FIXME: Can we do this as a sleep ? */
/* Wait for 20ms, i.e. one cycle at 50hz. */
mdelay(20);
}
static void scu_busy_loop(void *scu_base)
{
u32 status = 0;
u32 loop_count = 0;
status = readl(scu_base + 0x04);
while (status & 1) {
udelay(1); /* scu processing time is in few u secods */
status = readl(scu_base + 0x04);
loop_count++;
/* break if scu doesn't reset busy bit after huge retry */
if (loop_count > 1000) {
DRM_DEBUG_KMS("SCU IPC timed out");
return;
}
}
}
static void oaktrail_hdmi_reset(struct drm_device *dev)
{
void *base;
/* FIXME: at least make these defines */
unsigned int scu_ipc_mmio = 0xff11c000;
int scu_len = 1024;
base = ioremap((resource_size_t)scu_ipc_mmio, scu_len);
if (base == NULL) {
DRM_ERROR("failed to map SCU mmio\n");
return;
}
/* scu ipc: assert hdmi controller reset */
writel(0xff11d118, base + 0x0c);
writel(0x7fffffdf, base + 0x80);
writel(0x42005, base + 0x0);
scu_busy_loop(base);
/* scu ipc: de-assert hdmi controller reset */
writel(0xff11d118, base + 0x0c);
writel(0x7fffffff, base + 0x80);
writel(0x42005, base + 0x0);
scu_busy_loop(base);
iounmap(base);
}
static void oaktrail_hdmi_audio_enable(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
@ -208,104 +155,6 @@ static void oaktrail_hdmi_audio_disable(struct drm_device *dev)
HDMI_READ(HDMI_HCR);
}
void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
u32 temp;
switch (mode) {
case DRM_MODE_DPMS_OFF:
/* Disable VGACNTRL */
REG_WRITE(VGACNTRL, 0x80000000);
/* Disable plane */
temp = REG_READ(DSPBCNTR);
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE);
REG_READ(DSPBCNTR);
/* Flush the plane changes */
REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
REG_READ(DSPBSURF);
}
/* Disable pipe B */
temp = REG_READ(PIPEBCONF);
if ((temp & PIPEACONF_ENABLE) != 0) {
REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE);
REG_READ(PIPEBCONF);
}
/* Disable LNW Pipes, etc */
temp = REG_READ(PCH_PIPEBCONF);
if ((temp & PIPEACONF_ENABLE) != 0) {
REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE);
REG_READ(PCH_PIPEBCONF);
}
/* wait for pipe off */
udelay(150);
/* Disable dpll */
temp = REG_READ(DPLL_CTRL);
if ((temp & DPLL_PWRDN) == 0) {
REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET));
REG_WRITE(DPLL_STATUS, 0x1);
}
/* wait for dpll off */
udelay(150);
break;
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
/* Enable dpll */
temp = REG_READ(DPLL_CTRL);
if ((temp & DPLL_PWRDN) != 0) {
REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET));
temp = REG_READ(DPLL_CLK_ENABLE);
REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI);
REG_READ(DPLL_CLK_ENABLE);
}
/* wait for dpll warm up */
udelay(150);
/* Enable pipe B */
temp = REG_READ(PIPEBCONF);
if ((temp & PIPEACONF_ENABLE) == 0) {
REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE);
REG_READ(PIPEBCONF);
}
/* Enable LNW Pipe B */
temp = REG_READ(PCH_PIPEBCONF);
if ((temp & PIPEACONF_ENABLE) == 0) {
REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE);
REG_READ(PCH_PIPEBCONF);
}
wait_for_vblank(dev);
/* Enable plane */
temp = REG_READ(DSPBCNTR);
if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE);
/* Flush the plane changes */
REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
REG_READ(DSPBSURF);
}
psb_intel_crtc_load_lut(crtc);
}
/* DSPARB */
REG_WRITE(DSPARB, 0x00003fbf);
/* FW1 */
REG_WRITE(0x70034, 0x3f880a0a);
/* FW2 */
REG_WRITE(0x70038, 0x0b060808);
/* FW4 */
REG_WRITE(0x70050, 0x08030404);
/* FW5 */
REG_WRITE(0x70054, 0x04040404);
/* LNC Chicken Bits */
REG_WRITE(0x70400, 0x4000);
}
static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
{
static int dpms_mode = -1;
@ -327,182 +176,6 @@ static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
HDMI_WRITE(HDMI_VIDEO_REG, temp);
}
static unsigned int htotal_calculate(struct drm_display_mode *mode)
{
u32 htotal, new_crtc_htotal;
htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16);
/*
* 1024 x 768 new_crtc_htotal = 0x1024;
* 1280 x 1024 new_crtc_htotal = 0x0c34;
*/
new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock;
return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16);
}
static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target,
int refclk, struct oaktrail_hdmi_clock *best_clock)
{
int np_min, np_max, nr_min, nr_max;
int np, nr, nf;
np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10);
np_max = oaktrail_hdmi_limit.vco.max / (target * 10);
if (np_min < oaktrail_hdmi_limit.np.min)
np_min = oaktrail_hdmi_limit.np.min;
if (np_max > oaktrail_hdmi_limit.np.max)
np_max = oaktrail_hdmi_limit.np.max;
nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max));
nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min));
if (nr_min < oaktrail_hdmi_limit.nr.min)
nr_min = oaktrail_hdmi_limit.nr.min;
if (nr_max > oaktrail_hdmi_limit.nr.max)
nr_max = oaktrail_hdmi_limit.nr.max;
np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max));
nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np));
nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk);
DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf);
/*
* 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000;
* 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000;
*/
best_clock->np = np;
best_clock->nr = nr - 1;
best_clock->nf = (nf << 14);
}
int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
int pipe = 1;
int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
int refclk;
struct oaktrail_hdmi_clock clock;
u32 dspcntr, pipeconf, dpll, temp;
int dspcntr_reg = DSPBCNTR;
/* Disable the VGA plane that we never use */
REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
/* XXX: Disable the panel fitter if it was on our pipe */
/* Disable dpll if necessary */
dpll = REG_READ(DPLL_CTRL);
if ((dpll & DPLL_PWRDN) == 0) {
REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET));
REG_WRITE(DPLL_DIV_CTRL, 0x00000000);
REG_WRITE(DPLL_STATUS, 0x1);
}
udelay(150);
/* reset controller: FIXME - can we sort out the ioremap mess ? */
iounmap(hdmi_dev->regs);
oaktrail_hdmi_reset(dev);
/* program and enable dpll */
refclk = 25000;
oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock);
/* Setting DPLL */
dpll = REG_READ(DPLL_CTRL);
dpll &= ~DPLL_PDIV_MASK;
dpll &= ~(DPLL_PWRDN | DPLL_RESET);
REG_WRITE(DPLL_CTRL, 0x00000008);
REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr));
REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1));
REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN));
REG_WRITE(DPLL_UPDATE, 0x80000000);
REG_WRITE(DPLL_CLK_ENABLE, 0x80050102);
udelay(150);
hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len);
if (hdmi_dev->regs == NULL) {
DRM_ERROR("failed to do hdmi mmio mapping\n");
return -ENOMEM;
}
/* configure HDMI */
HDMI_WRITE(0x1004, 0x1fd);
HDMI_WRITE(0x2000, 0x1);
HDMI_WRITE(0x2008, 0x0);
HDMI_WRITE(0x3130, 0x8);
HDMI_WRITE(0x101c, 0x1800810);
temp = htotal_calculate(adjusted_mode);
REG_WRITE(htot_reg, temp);
REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
REG_WRITE(pipesrc_reg,
((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
REG_WRITE(PCH_PIPEBSRC,
((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start;
HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp);
REG_WRITE(dspsize_reg,
((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
REG_WRITE(dsppos_reg, 0);
/* Flush the plane changes */
{
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc_funcs->mode_set_base(crtc, x, y, old_fb);
}
/* Set up the display plane register */
dspcntr = REG_READ(dspcntr_reg);
dspcntr |= DISPPLANE_GAMMA_ENABLE;
dspcntr |= DISPPLANE_SEL_PIPE_B;
dspcntr |= DISPLAY_PLANE_ENABLE;
/* setup pipeconf */
pipeconf = REG_READ(pipeconf_reg);
pipeconf |= PIPEACONF_ENABLE;
REG_WRITE(pipeconf_reg, pipeconf);
REG_READ(pipeconf_reg);
REG_WRITE(PCH_PIPEBCONF, pipeconf);
REG_READ(PCH_PIPEBCONF);
wait_for_vblank(dev);
REG_WRITE(dspcntr_reg, dspcntr);
wait_for_vblank(dev);
return 0;
}
static int oaktrail_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{