1
0
Fork 0

ARM: SoC fixes for v5.8

Here are a couple of bug fixes, mostly for devicetree files
 
 NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to
     avoid hardware damage
   - Code fixes for a compiler warning and incorrect reference
     counting, both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.
 
 Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs
 
 STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration
 
 ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup
 
 TEE drivers:
   - MAINTAINERS: change tee mailing list
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl74uLEACgkQmmx57+YA
 GNnPHA/8DM6SnpONT9todCkl8NWe6SKWtjhb4hdmFyvWh2EQkau3HfTQhFsrX7N8
 1dZwPZlbyKl/np6D9MDctnk9S6LZjqUMVbJVpFbIdiBzHbD1rTE9ordBWehkymqm
 ZaxUe949QtKHgq+Duv4a3yuJUbxR8R01nyG0zsvGwWJwFYTlp/RPOoEZLK84RESK
 Kqimmg3UvjiRkaXBO+O/AqNeTUQtYyk8ru+5t2EkJW62QO/niU2107givmRikcrO
 pPfeP5hR4qtiTQGWEb2m4TWWkHlGpF0+bT2H4kzZGq99wFp1SqR46Hz+/5USCkwd
 vnIBFvJu9huQ2cQk0q9o998RAKBcg/ybG89MvuMWo5rQIy6NhXaJ6eb86yQggkei
 AnDa+mmLX4KcEi8LTI/I3n/4fHwg4tSRy+5RkzBRJBbTQQoRy9Bs3iQZhy6PE0fL
 rUm1wkNGH80nRQUOpiHxHb2PTdeGTialMAKgISqY4ltsGlSNUqneVxN1dYXytFMa
 mf7CM2ihJNe+Fyo52FFfDDt1re/A+ztbalX+oNGX8RbHlczFoZHldGYcAxGkosNE
 2MdAVWhvNR0E9nwYY8QsGN2e3IRdjnxc3hsiWPFhhHwskd1is7FDsnXdqU6qIr3I
 9HytkMhICr3cdnbqbVv/+5rTrZ89x/atQLUWJcj6PZk6WNZ/gA0=
 =P5b/
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bug fixes, mostly for devicetree files

  NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to avoid
     hardware damage
   - Code fixes for a compiler warning and incorrect reference counting,
     both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.

  Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs

  STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration

  ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup

  TEE drivers:
   - MAINTAINERS: change tee mailing list"

* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "ARM: sti: Implement dummy L2 cache's write_sec"
  soc: imx8m: fix build warning
  ARM: imx6: add missing put_device() call in imx6q_suspend_init()
  ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
  soc: imx8m: Correct i.MX8MP UID fuse offset
  ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
  ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
  arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
  arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
  arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
  ARM: dts: NSP: Correct FA2 mailbox node
  ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
  MAINTAINERS: change tee mailing list
  ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
  ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
  ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
  arm: dts: vexpress: Move mcc node back into motherboard node
alistair/sunxi64-5.8
Linus Torvalds 2020-06-28 14:55:18 -07:00
commit e44b59cd75
22 changed files with 152 additions and 118 deletions

View File

@ -12695,13 +12695,13 @@ F: arch/mips/boot/dts/ralink/omega2p.dts
OP-TEE DRIVER
M: Jens Wiklander <jens.wiklander@linaro.org>
L: tee-dev@lists.linaro.org
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: drivers/tee/optee/
OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
M: Sumit Garg <sumit.garg@linaro.org>
L: tee-dev@lists.linaro.org
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: drivers/char/hw_random/optee-rng.c
@ -16774,7 +16774,7 @@ F: include/media/i2c/tw9910.h
TEE SUBSYSTEM
M: Jens Wiklander <jens.wiklander@linaro.org>
L: tee-dev@lists.linaro.org
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: Documentation/tee.txt
F: drivers/tee/

View File

@ -200,7 +200,7 @@
status = "disabled";
};
dma@20000 {
dma: dma@20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@ -215,6 +215,8 @@
clocks = <&iprocslow>;
clock-names = "apb_pclk";
#dma-cells = <1>;
dma-coherent;
status = "disabled";
};
sdio: sdhci@21000 {
@ -257,10 +259,10 @@
status = "disabled";
};
mailbox: mailbox@25000 {
mailbox: mailbox@25c00 {
compatible = "brcm,iproc-fa2-mbox";
reg = <0x25000 0x445>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x25c00 0x400>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;

View File

@ -17,6 +17,7 @@
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};

View File

@ -58,6 +58,10 @@
/* USB 3 support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -58,6 +58,10 @@
/* USB 3 support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -58,6 +58,10 @@
/* XHCI support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -58,6 +58,10 @@
/* USB 3 and SLIC support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -58,6 +58,10 @@
/* USB 3 and SLIC support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -69,6 +69,10 @@
status = "okay";
};
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -48,6 +48,10 @@
};
};
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};

View File

@ -232,13 +232,6 @@
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
@ -409,10 +402,4 @@
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
>;
};
};

View File

@ -57,6 +57,13 @@
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_out>;
@ -106,4 +113,10 @@
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0
>;
};
};

View File

@ -100,79 +100,6 @@
};
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
oscclk0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: oscclk1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 65000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: oscclk2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt-vio {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp-mcc {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
bus@8000000 {
motherboard-bus {
model = "V2M-P1";
@ -435,6 +362,79 @@
};
};
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
oscclk0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: oscclk1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 65000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: oscclk2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt-vio {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp-mcc {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};
};
};

View File

@ -53,6 +53,7 @@ config ARCH_BCM_NSP
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
select ARM_TIMER_SP804
select THERMAL
select THERMAL_OF
help

View File

@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram(
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
goto put_node;
goto put_device;
}
ocram_base = gen_pool_alloc(ocram_pool, size);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
goto put_node;
goto put_device;
}
phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram(
if (virt_out)
*virt_out = virt;
put_device:
put_device(&pdev->dev);
put_node:
of_node_put(node);

View File

@ -493,14 +493,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
goto put_node;
goto put_device;
}
ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
goto put_node;
goto put_device;
}
ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@ -523,7 +523,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
if (ret) {
pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
goto put_node;
goto put_device;
}
ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
@ -570,7 +570,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
&imx6_suspend,
MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
goto put_node;
goto put_device;
pl310_cache_map_failed:
iounmap(pm_info->gpc_base.vbase);
@ -580,6 +580,8 @@ iomuxc_map_failed:
iounmap(pm_info->src_base.vbase);
src_map_failed:
iounmap(pm_info->mmdc_base.vbase);
put_device:
put_device(&pdev->dev);
put_node:
of_node_put(node);

View File

@ -20,14 +20,6 @@ static const char *const stih41x_dt_match[] __initconst = {
NULL
};
static void sti_l2_write_sec(unsigned long val, unsigned reg)
{
/*
* We can't write to secure registers as we are in non-secure
* mode, until we have some SMI service available.
*/
}
DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
.dt_compat = stih41x_dt_match,
.l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE |
@ -36,5 +28,4 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
L2C_AUX_CTRL_WAY_SIZE(4),
.l2c_aux_mask = 0xc0000fff,
.smp = smp_ops(sti_smp_ops),
.l2c_write_sec = sti_l2_write_sec,
MACHINE_END

View File

@ -136,7 +136,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
@ -144,7 +144,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;

View File

@ -208,7 +208,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
@ -216,7 +216,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;

View File

@ -113,7 +113,7 @@
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
@ -121,7 +121,7 @@
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;

View File

@ -181,6 +181,7 @@ EXPORT_SYMBOL_GPL(rpi_firmware_property);
static void
rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
{
time64_t date_and_time;
u32 packet;
int ret = rpi_firmware_property(fw,
RPI_FIRMWARE_GET_FIRMWARE_REVISION,
@ -189,7 +190,9 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
if (ret)
return;
dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &packet);
/* This is not compatible with y2038 */
date_and_time = packet;
dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &date_and_time);
}
static void

View File

@ -22,6 +22,8 @@
#define OCOTP_UID_LOW 0x410
#define OCOTP_UID_HIGH 0x420
#define IMX8MP_OCOTP_UID_OFFSET 0x10
/* Same as ANADIG_DIGPROG_IMX7D */
#define ANADIG_DIGPROG_IMX8MM 0x800
@ -87,6 +89,8 @@ static void __init imx8mm_soc_uid(void)
{
void __iomem *ocotp_base;
struct device_node *np;
u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
IMX8MP_OCOTP_UID_OFFSET : 0;
np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
if (!np)
@ -95,9 +99,9 @@ static void __init imx8mm_soc_uid(void)
ocotp_base = of_iomap(np, 0);
WARN_ON(!ocotp_base);
soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
soc_uid <<= 32;
soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
iounmap(ocotp_base);
of_node_put(np);
@ -146,7 +150,7 @@ static const struct imx8_soc_data imx8mp_soc_data = {
.soc_revision = imx8mm_soc_revision,
};
static const struct of_device_id imx8_soc_match[] = {
static __maybe_unused const struct of_device_id imx8_soc_match[] = {
{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
{ .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
{ .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },