bnx2x: add DCB support

Adding DCB initialization and handling on 57712 FW/HW

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vladislav Zolotarov 2010-12-13 05:44:18 +00:00 committed by David S. Miller
parent 8307fa3e86
commit e4901dde12
9 changed files with 2050 additions and 5 deletions

View file

@ -4,4 +4,4 @@
obj-$(CONFIG_BNX2X) += bnx2x.o
bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o
bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o

View file

@ -50,6 +50,7 @@
#include "bnx2x_fw_defs.h"
#include "bnx2x_hsi.h"
#include "bnx2x_link.h"
#include "bnx2x_dcb.h"
#include "bnx2x_stats.h"
/* error/debug prints */
@ -820,6 +821,8 @@ struct bnx2x_slowpath {
u32 wb_comp;
u32 wb_data[4];
/* pfc configuration for DCBX ramrod */
struct flow_control_configuration pfc_config;
};
#define bnx2x_sp(bp, var) (&bp->slowpath->var)
@ -1180,6 +1183,18 @@ struct bnx2x {
char fw_ver[32];
const struct firmware *firmware;
/* LLDP params */
struct bnx2x_config_lldp_params lldp_config_params;
/* DCBX params */
struct bnx2x_config_dcbx_params dcbx_config_params;
struct bnx2x_dcbx_port_params dcbx_port_params;
int dcb_version;
/* DCBX Negotation results */
struct dcbx_features dcbx_local_feat;
u32 dcbx_error;
};
/**

View file

@ -1371,6 +1371,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
}
}
bnx2x_dcbx_init(bp);
bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
rc = bnx2x_func_start(bp);

View file

@ -323,6 +323,13 @@ int bnx2x_func_start(struct bnx2x *bp);
*/
void bnx2x_ilt_set_info(struct bnx2x *bp);
/**
* Inintialize dcbx protocol
*
* @param bp
*/
void bnx2x_dcbx_init(struct bnx2x *bp);
/**
* Set power state to the requested value. Currently only D0 and
* D3hot are supported.

File diff suppressed because it is too large Load diff

View file

@ -0,0 +1,193 @@
/* bnx2x_dcb.h: Broadcom Everest network driver.
*
* Copyright 2009-2010 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* consent.
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Dmitry Kravkov
*
*/
#ifndef BNX2X_DCB_H
#define BNX2X_DCB_H
#include "bnx2x_hsi.h"
#define LLFC_DRIVER_TRAFFIC_TYPE_MAX 3 /* NW, iSCSI, FCoE */
struct bnx2x_dcbx_app_params {
u32 enabled;
u32 traffic_type_priority[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
};
#define E2_NUM_OF_COS 2
#define BNX2X_DCBX_COS_NOT_STRICT 0
#define BNX2X_DCBX_COS_LOW_STRICT 1
#define BNX2X_DCBX_COS_HIGH_STRICT 2
struct bnx2x_dcbx_cos_params {
u32 bw_tbl;
u32 pri_bitmask;
u8 strict;
u8 pauseable;
};
struct bnx2x_dcbx_pg_params {
u32 enabled;
u8 num_of_cos; /* valid COS entries */
struct bnx2x_dcbx_cos_params cos_params[E2_NUM_OF_COS];
};
struct bnx2x_dcbx_pfc_params {
u32 enabled;
u32 priority_non_pauseable_mask;
};
struct bnx2x_dcbx_port_params {
u32 dcbx_enabled;
struct bnx2x_dcbx_pfc_params pfc;
struct bnx2x_dcbx_pg_params ets;
struct bnx2x_dcbx_app_params app;
};
#define BNX2X_DCBX_CONFIG_INV_VALUE (0xFFFFFFFF)
#define BNX2X_DCBX_OVERWRITE_SETTINGS_DISABLE 0
#define BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE 1
#define BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID (BNX2X_DCBX_CONFIG_INV_VALUE)
/*******************************************************************************
* LLDP protocol configuration parameters.
******************************************************************************/
struct bnx2x_config_lldp_params {
u32 overwrite_settings;
u32 msg_tx_hold;
u32 msg_fast_tx;
u32 tx_credit_max;
u32 msg_tx_interval;
u32 tx_fast;
};
struct bnx2x_admin_priority_app_table {
u32 valid;
u32 priority;
#define INVALID_TRAFFIC_TYPE_PRIORITY (0xFFFFFFFF)
u32 traffic_type;
#define TRAFFIC_TYPE_ETH 0
#define TRAFFIC_TYPE_PORT 1
u32 app_id;
};
/*******************************************************************************
* DCBX protocol configuration parameters.
******************************************************************************/
struct bnx2x_config_dcbx_params {
u32 dcb_enable;
u32 admin_dcbx_enable;
u32 overwrite_settings;
u32 admin_dcbx_version;
u32 admin_ets_enable;
u32 admin_pfc_enable;
u32 admin_tc_supported_tx_enable;
u32 admin_ets_configuration_tx_enable;
u32 admin_ets_recommendation_tx_enable;
u32 admin_pfc_tx_enable;
u32 admin_application_priority_tx_enable;
u32 admin_ets_willing;
u32 admin_ets_reco_valid;
u32 admin_pfc_willing;
u32 admin_app_priority_willing;
u32 admin_configuration_bw_precentage[8];
u32 admin_configuration_ets_pg[8];
u32 admin_recommendation_bw_precentage[8];
u32 admin_recommendation_ets_pg[8];
u32 admin_pfc_bitmap;
struct bnx2x_admin_priority_app_table admin_priority_app_table[4];
u32 admin_default_priority;
};
#define GET_FLAGS(flags, bits) ((flags) & (bits))
#define SET_FLAGS(flags, bits) ((flags) |= (bits))
#define RESET_FLAGS(flags, bits) ((flags) &= ~(bits))
enum {
DCBX_READ_LOCAL_MIB,
DCBX_READ_REMOTE_MIB
};
#define ETH_TYPE_FCOE (0x8906)
#define TCP_PORT_ISCSI (0xCBC)
#define PFC_VALUE_FRAME_SIZE (512)
#define PFC_QUANTA_IN_NANOSEC_FROM_SPEED_MEGA(mega_speed) \
((1000 * PFC_VALUE_FRAME_SIZE)/(mega_speed))
#define PFC_BRB1_REG_HIGH_LLFC_LOW_THRESHOLD 130
#define PFC_BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD 170
struct cos_entry_help_data {
u32 pri_join_mask;
u32 cos_bw;
u8 strict;
bool pausable;
};
struct cos_help_data {
struct cos_entry_help_data data[E2_NUM_OF_COS];
u8 num_of_cos;
};
#define DCBX_ILLEGAL_PG (0xFF)
#define DCBX_PFC_PRI_MASK (0xFF)
#define DCBX_STRICT_PRIORITY (15)
#define DCBX_INVALID_COS_BW (0xFFFFFFFF)
#define DCBX_PFC_PRI_NON_PAUSE_MASK(bp) \
((bp)->dcbx_port_params.pfc.priority_non_pauseable_mask)
#define DCBX_PFC_PRI_PAUSE_MASK(bp) \
((u8)~DCBX_PFC_PRI_NON_PAUSE_MASK(bp))
#define DCBX_PFC_PRI_GET_PAUSE(bp, pg_pri) \
((pg_pri) & (DCBX_PFC_PRI_PAUSE_MASK(bp)))
#define DCBX_PFC_PRI_GET_NON_PAUSE(bp, pg_pri) \
(DCBX_PFC_PRI_NON_PAUSE_MASK(bp) & (pg_pri))
#define IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pg_pri) \
(pg_pri == DCBX_PFC_PRI_GET_PAUSE((bp), (pg_pri)))
#define IS_DCBX_PFC_PRI_ONLY_NON_PAUSE(bp, pg_pri)\
((pg_pri) == DCBX_PFC_PRI_GET_NON_PAUSE((bp), (pg_pri)))
#define IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pg_pri) \
(!(IS_DCBX_PFC_PRI_ONLY_NON_PAUSE((bp), (pg_pri)) || \
IS_DCBX_PFC_PRI_ONLY_PAUSE((bp), (pg_pri))))
struct pg_entry_help_data {
u8 num_of_dif_pri;
u8 pg;
u32 pg_priority;
};
struct pg_help_data {
struct pg_entry_help_data data[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
u8 num_of_pg;
};
/* forward DCB/PFC related declarations */
struct bnx2x;
void bnx2x_dcb_init_intmem_pfc(struct bnx2x *bp);
void bnx2x_dcbx_update(struct work_struct *work);
void bnx2x_dcbx_init_params(struct bnx2x *bp);
enum {
BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1,
BNX2X_DCBX_STATE_TX_PAUSED = 0x2,
BNX2X_DCBX_STATE_TX_RELEASED = 0x4
};
void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state);
#endif /* BNX2X_DCB_H */

View file

@ -684,7 +684,7 @@ struct shm_dev_info { /* size */
#define E1VN_MAX 1
#define E1HVN_MAX 4
#define E2_VF_MAX 64
/* This value (in milliseconds) determines the frequency of the driver
* issuing the PULSE message code. The firmware monitors this periodic
* pulse to determine when to switch to an OS-absent mode. */
@ -820,6 +820,8 @@ struct drv_func_mb {
#define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL 0xa1000000
#define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL 0x00050234
#define DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG 0xb0000000
#define DRV_MSG_CODE_DCBX_PMF_DRV_OK 0xb2000000
#define DRV_MSG_CODE_SET_MF_BW 0xe0000000
#define REQ_BC_VER_4_SET_MF_BW 0x00060202
#define DRV_MSG_CODE_SET_MF_BW_ACK 0xe1000000
@ -905,6 +907,8 @@ struct drv_func_mb {
#define DRV_STATUS_DCC_RESERVED1 0x00000800
#define DRV_STATUS_DCC_SET_PROTOCOL 0x00001000
#define DRV_STATUS_DCC_SET_PRIORITY 0x00002000
#define DRV_STATUS_DCBX_EVENT_MASK 0x000f0000
#define DRV_STATUS_DCBX_NEGOTIATION_RESULTS 0x00010000
u32 virt_mac_upper;
#define VIRT_MAC_SIGN_MASK 0xffff0000
@ -1089,6 +1093,251 @@ struct fw_flr_mb {
struct fw_flr_ack ack;
};
/**** SUPPORT FOR SHMEM ARRRAYS ***
* The SHMEM HSI is aligned on 32 bit boundaries which makes it difficult to
* define arrays with storage types smaller then unsigned dwords.
* The macros below add generic support for SHMEM arrays with numeric elements
* that can span 2,4,8 or 16 bits. The array underlying type is a 32 bit dword
* array with individual bit-filed elements accessed using shifts and masks.
*
*/
/* eb is the bitwidth of a single element */
#define SHMEM_ARRAY_MASK(eb) ((1<<(eb))-1)
#define SHMEM_ARRAY_ENTRY(i, eb) ((i)/(32/(eb)))
/* the bit-position macro allows the used to flip the order of the arrays
* elements on a per byte or word boundary.
*
* example: an array with 8 entries each 4 bit wide. This array will fit into
* a single dword. The diagrmas below show the array order of the nibbles.
*
* SHMEM_ARRAY_BITPOS(i, 4, 4) defines the stadard ordering:
*
* | | | |
* 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
* | | | |
*
* SHMEM_ARRAY_BITPOS(i, 4, 8) defines a flip ordering per byte:
*
* | | | |
* 1 | 0 | 3 | 2 | 5 | 4 | 7 | 6 |
* | | | |
*
* SHMEM_ARRAY_BITPOS(i, 4, 16) defines a flip ordering per word:
*
* | | | |
* 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 |
* | | | |
*/
#define SHMEM_ARRAY_BITPOS(i, eb, fb) \
((((32/(fb)) - 1 - ((i)/((fb)/(eb))) % (32/(fb))) * (fb)) + \
(((i)%((fb)/(eb))) * (eb)))
#define SHMEM_ARRAY_GET(a, i, eb, fb) \
((a[SHMEM_ARRAY_ENTRY(i, eb)] >> SHMEM_ARRAY_BITPOS(i, eb, fb)) & \
SHMEM_ARRAY_MASK(eb))
#define SHMEM_ARRAY_SET(a, i, eb, fb, val) \
do { \
a[SHMEM_ARRAY_ENTRY(i, eb)] &= ~(SHMEM_ARRAY_MASK(eb) << \
SHMEM_ARRAY_BITPOS(i, eb, fb)); \
a[SHMEM_ARRAY_ENTRY(i, eb)] |= (((val) & SHMEM_ARRAY_MASK(eb)) << \
SHMEM_ARRAY_BITPOS(i, eb, fb)); \
} while (0)
/****START OF DCBX STRUCTURES DECLARATIONS****/
#define DCBX_MAX_NUM_PRI_PG_ENTRIES 8
#define DCBX_PRI_PG_BITWIDTH 4
#define DCBX_PRI_PG_FBITS 8
#define DCBX_PRI_PG_GET(a, i) \
SHMEM_ARRAY_GET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS)
#define DCBX_PRI_PG_SET(a, i, val) \
SHMEM_ARRAY_SET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS, val)
#define DCBX_MAX_NUM_PG_BW_ENTRIES 8
#define DCBX_BW_PG_BITWIDTH 8
#define DCBX_PG_BW_GET(a, i) \
SHMEM_ARRAY_GET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH)
#define DCBX_PG_BW_SET(a, i, val) \
SHMEM_ARRAY_SET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH, val)
#define DCBX_STRICT_PRI_PG 15
#define DCBX_MAX_APP_PROTOCOL 16
#define FCOE_APP_IDX 0
#define ISCSI_APP_IDX 1
#define PREDEFINED_APP_IDX_MAX 2
struct dcbx_ets_feature {
u32 enabled;
u32 pg_bw_tbl[2];
u32 pri_pg_tbl[1];
};
struct dcbx_pfc_feature {
#ifdef __BIG_ENDIAN
u8 pri_en_bitmap;
#define DCBX_PFC_PRI_0 0x01
#define DCBX_PFC_PRI_1 0x02
#define DCBX_PFC_PRI_2 0x04
#define DCBX_PFC_PRI_3 0x08
#define DCBX_PFC_PRI_4 0x10
#define DCBX_PFC_PRI_5 0x20
#define DCBX_PFC_PRI_6 0x40
#define DCBX_PFC_PRI_7 0x80
u8 pfc_caps;
u8 reserved;
u8 enabled;
#elif defined(__LITTLE_ENDIAN)
u8 enabled;
u8 reserved;
u8 pfc_caps;
u8 pri_en_bitmap;
#define DCBX_PFC_PRI_0 0x01
#define DCBX_PFC_PRI_1 0x02
#define DCBX_PFC_PRI_2 0x04
#define DCBX_PFC_PRI_3 0x08
#define DCBX_PFC_PRI_4 0x10
#define DCBX_PFC_PRI_5 0x20
#define DCBX_PFC_PRI_6 0x40
#define DCBX_PFC_PRI_7 0x80
#endif
};
struct dcbx_app_priority_entry {
#ifdef __BIG_ENDIAN
u16 app_id;
u8 pri_bitmap;
u8 appBitfield;
#define DCBX_APP_ENTRY_VALID 0x01
#define DCBX_APP_ENTRY_SF_MASK 0x30
#define DCBX_APP_ENTRY_SF_SHIFT 4
#define DCBX_APP_SF_ETH_TYPE 0x10
#define DCBX_APP_SF_PORT 0x20
#elif defined(__LITTLE_ENDIAN)
u8 appBitfield;
#define DCBX_APP_ENTRY_VALID 0x01
#define DCBX_APP_ENTRY_SF_MASK 0x30
#define DCBX_APP_ENTRY_SF_SHIFT 4
#define DCBX_APP_SF_ETH_TYPE 0x10
#define DCBX_APP_SF_PORT 0x20
u8 pri_bitmap;
u16 app_id;
#endif
};
struct dcbx_app_priority_feature {
#ifdef __BIG_ENDIAN
u8 reserved;
u8 default_pri;
u8 tc_supported;
u8 enabled;
#elif defined(__LITTLE_ENDIAN)
u8 enabled;
u8 tc_supported;
u8 default_pri;
u8 reserved;
#endif
struct dcbx_app_priority_entry app_pri_tbl[DCBX_MAX_APP_PROTOCOL];
};
struct dcbx_features {
struct dcbx_ets_feature ets;
struct dcbx_pfc_feature pfc;
struct dcbx_app_priority_feature app;
};
struct lldp_params {
#ifdef __BIG_ENDIAN
u8 msg_fast_tx_interval;
u8 msg_tx_hold;
u8 msg_tx_interval;
u8 admin_status;
#define LLDP_TX_ONLY 0x01
#define LLDP_RX_ONLY 0x02
#define LLDP_TX_RX 0x03
#define LLDP_DISABLED 0x04
u8 reserved1;
u8 tx_fast;
u8 tx_crd_max;
u8 tx_crd;
#elif defined(__LITTLE_ENDIAN)
u8 admin_status;
#define LLDP_TX_ONLY 0x01
#define LLDP_RX_ONLY 0x02
#define LLDP_TX_RX 0x03
#define LLDP_DISABLED 0x04
u8 msg_tx_interval;
u8 msg_tx_hold;
u8 msg_fast_tx_interval;
u8 tx_crd;
u8 tx_crd_max;
u8 tx_fast;
u8 reserved1;
#endif
#define REM_CHASSIS_ID_STAT_LEN 4
#define REM_PORT_ID_STAT_LEN 4
u32 peer_chassis_id[REM_CHASSIS_ID_STAT_LEN];
u32 peer_port_id[REM_PORT_ID_STAT_LEN];
};
struct lldp_dcbx_stat {
#define LOCAL_CHASSIS_ID_STAT_LEN 2
#define LOCAL_PORT_ID_STAT_LEN 2
u32 local_chassis_id[LOCAL_CHASSIS_ID_STAT_LEN];
u32 local_port_id[LOCAL_PORT_ID_STAT_LEN];
u32 num_tx_dcbx_pkts;
u32 num_rx_dcbx_pkts;
};
struct lldp_admin_mib {
u32 ver_cfg_flags;
#define DCBX_ETS_CONFIG_TX_ENABLED 0x00000001
#define DCBX_PFC_CONFIG_TX_ENABLED 0x00000002
#define DCBX_APP_CONFIG_TX_ENABLED 0x00000004
#define DCBX_ETS_RECO_TX_ENABLED 0x00000008
#define DCBX_ETS_RECO_VALID 0x00000010
#define DCBX_ETS_WILLING 0x00000020
#define DCBX_PFC_WILLING 0x00000040
#define DCBX_APP_WILLING 0x00000080
#define DCBX_VERSION_CEE 0x00000100
#define DCBX_VERSION_IEEE 0x00000200
#define DCBX_DCBX_ENABLED 0x00000400
#define DCBX_CEE_VERSION_MASK 0x0000f000
#define DCBX_CEE_VERSION_SHIFT 12
#define DCBX_CEE_MAX_VERSION_MASK 0x000f0000
#define DCBX_CEE_MAX_VERSION_SHIFT 16
struct dcbx_features features;
};
struct lldp_remote_mib {
u32 prefix_seq_num;
u32 flags;
#define DCBX_ETS_TLV_RX 0x00000001
#define DCBX_PFC_TLV_RX 0x00000002
#define DCBX_APP_TLV_RX 0x00000004
#define DCBX_ETS_RX_ERROR 0x00000010
#define DCBX_PFC_RX_ERROR 0x00000020
#define DCBX_APP_RX_ERROR 0x00000040
#define DCBX_ETS_REM_WILLING 0x00000100
#define DCBX_PFC_REM_WILLING 0x00000200
#define DCBX_APP_REM_WILLING 0x00000400
#define DCBX_REMOTE_ETS_RECO_VALID 0x00001000
struct dcbx_features features;
u32 suffix_seq_num;
};
struct lldp_local_mib {
u32 prefix_seq_num;
u32 error;
#define DCBX_LOCAL_ETS_ERROR 0x00000001
#define DCBX_LOCAL_PFC_ERROR 0x00000002
#define DCBX_LOCAL_APP_ERROR 0x00000004
#define DCBX_LOCAL_PFC_MISMATCH 0x00000010
#define DCBX_LOCAL_APP_MISMATCH 0x00000020
struct dcbx_features features;
u32 suffix_seq_num;
};
/***END OF DCBX STRUCTURES DECLARATIONS***/
struct shmem2_region {
@ -1112,7 +1361,12 @@ struct shmem2_region {
#define SHMEM_MF_CFG_ADDR_NONE 0x00000000
struct fw_flr_mb flr_mb;
u32 reserved[3];
u32 dcbx_lldp_params_offset;
#define SHMEM_LLDP_DCBX_PARAMS_NONE 0x00000000
u32 dcbx_neg_res_offset;
#define SHMEM_DCBX_NEG_RES_NONE 0x00000000
u32 dcbx_remote_mib_offset;
#define SHMEM_DCBX_REMOTE_MIB_NONE 0x00000000
/*
* The other shmemX_base_addr holds the other path's shmem address
* required for example in case of common phy init, or for path1 to know
@ -1121,6 +1375,10 @@ struct shmem2_region {
*/
u32 other_shmem_base_addr;
u32 other_shmem2_base_addr;
u32 reserved1[E2_VF_MAX / 32];
u32 reserved2[E2_FUNC_MAX][E2_VF_MAX / 32];
u32 dcbx_lldp_dcbx_stat_offset;
#define SHMEM_LLDP_DCBX_STAT_NONE 0x00000000
};
@ -3022,6 +3280,25 @@ struct fairness_vars_per_vn {
};
/*
* The data for flow control configuration
*/
struct flow_control_configuration {
struct priority_cos
traffic_type_to_priority_cos[MAX_PFC_TRAFFIC_TYPES];
#if defined(__BIG_ENDIAN)
u16 reserved1;
u8 dcb_version;
u8 dcb_enabled;
#elif defined(__LITTLE_ENDIAN)
u8 dcb_enabled;
u8 dcb_version;
u16 reserved1;
#endif
u32 reserved2;
};
/*
* FW version stored in the Xstorm RAM
*/

View file

@ -216,6 +216,7 @@ struct link_params {
u32 feature_config_flags;
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
#define FEATURE_CONFIG_PFC_ENABLED (1<<1)
#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3)
/* Will be populated during common init */
@ -332,4 +333,43 @@ u8 bnx2x_phy_probe(struct link_params *params);
u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
u32 shmem2_base, u8 port);
/* PFC port configuration params */
struct bnx2x_nig_brb_pfc_port_params {
/* NIG */
u32 pause_enable;
u32 llfc_out_en;
u32 llfc_enable;
u32 pkt_priority_to_cos;
u32 rx_cos0_priority_mask;
u32 rx_cos1_priority_mask;
u32 llfc_high_priority_classes;
u32 llfc_low_priority_classes;
/* BRB */
u32 cos0_pauseable;
u32 cos1_pauseable;
};
/**
* Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
* when link is already up
*/
void bnx2x_update_pfc(struct link_params *params,
struct link_vars *vars,
struct bnx2x_nig_brb_pfc_port_params *pfc_params);
/* Used to configure the ETS to disable */
void bnx2x_ets_disabled(struct link_params *params);
/* Used to configure the ETS to BW limited */
void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
const u32 cos1_bw);
/* Used to configure the ETS to strict */
u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
/* Read pfc statistic*/
void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
u32 pfc_frames_sent[2],
u32 pfc_frames_received[2]);
#endif /* BNX2X_LINK_H */

View file

@ -55,6 +55,7 @@
#include "bnx2x_init.h"
#include "bnx2x_init_ops.h"
#include "bnx2x_cmn.h"
#include "bnx2x_dcb.h"
#include <linux/firmware.h>
#include "bnx2x_fw_file_hdr.h"
@ -3105,6 +3106,11 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
bnx2x_pmf_update(bp);
if (bp->port.pmf &&
(val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS))
/* start dcbx state machine */
bnx2x_dcbx_set_params(bp,
BNX2X_DCBX_STATE_NEG_RECEIVED);
} else if (attn & BNX2X_MC_ASSERT_BITS) {
BNX2X_ERR("MC assert!\n");
@ -3724,6 +3730,15 @@ static void bnx2x_eq_int(struct bnx2x *bp)
BNX2X_FP_STATE_CLOSED;
goto next_spqe;
case EVENT_RING_OPCODE_STOP_TRAFFIC:
DP(NETIF_MSG_IFUP, "got STOP TRAFFIC\n");
bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
goto next_spqe;
case EVENT_RING_OPCODE_START_TRAFFIC:
DP(NETIF_MSG_IFUP, "got START TRAFFIC\n");
bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
goto next_spqe;
}
switch (opcode | bp->state) {
@ -4363,6 +4378,7 @@ static void bnx2x_init_internal_common(struct bnx2x *bp)
static void bnx2x_init_internal_port(struct bnx2x *bp)
{
/* port */
bnx2x_dcb_init_intmem_pfc(bp);
}
static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
@ -5488,8 +5504,10 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
* bits 4-7 are used for "per vn group attention" */
REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4,
(IS_MF(bp) ? 0xF7 : 0x7));
val = IS_MF(bp) ? 0xF7 : 0x7;
/* Enable DCBX attention for all but E1 */
val |= CHIP_IS_E1(bp) ? 0 : 0x10;
REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
@ -8775,6 +8793,8 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
bp->timer.data = (unsigned long) bp;
bp->timer.function = bnx2x_timer;
bnx2x_dcbx_init_params(bp);
return rc;
}