diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.txt index ca9adcf56355..ea73475471db 100644 --- a/Documentation/usb/rio.txt +++ b/Documentation/usb/rio.txt @@ -76,70 +76,30 @@ Additional Information and userspace tools Requirements ============ -A host with a USB port. Ideally, either a UHCI (Intel) or OHCI -(Compaq and others) hardware port should work. +A host with a USB port running a Linux kernel with RIO 500 support enabled. -A Linux development kernel (2.3.x) with USB support enabled or a -backported version to linux-2.2.x. See http://www.linux-usb.org for -more information on accomplishing this. +The driver is a module called rio500, which should be automatically loaded +as you plug in your device. If that fails you can manually load it with -A Linux kernel with RIO 500 support enabled. + modprobe rio500 -'lspci' which is only needed to determine the type of USB hardware -available in your machine. - -Configuration - -Using `lspci -v`, determine the type of USB hardware available. - - If you see something like:: - - USB Controller: ...... - Flags: ..... - I/O ports at .... - - Then you have a UHCI based controller. - - If you see something like:: - - USB Controller: ..... - Flags: .... - Memory at ..... - - Then you have a OHCI based controller. - -Using `make menuconfig` or your preferred method for configuring the -kernel, select 'Support for USB', 'OHCI/UHCI' depending on your -hardware (determined from the steps above), 'USB Diamond Rio500 support', and -'Preliminary USB device filesystem'. Compile and install the modules -(you may need to execute `depmod -a` to update the module -dependencies). - -Add a device for the USB rio500:: +Udev should automatically create a device node as soon as plug in your device. +If that fails, you can manually add a device for the USB rio500:: mknod /dev/usb/rio500 c 180 64 -Set appropriate permissions for /dev/usb/rio500 (don't forget about -group and world permissions). Both read and write permissions are +In that case, set appropriate permissions for /dev/usb/rio500 (don't forget +about group and world permissions). Both read and write permissions are required for proper operation. -Load the appropriate modules (if compiled as modules): - - OHCI:: - - modprobe usbcore - modprobe usb-ohci - modprobe rio500 - - UHCI:: - - modprobe usbcore - modprobe usb-uhci (or uhci) - modprobe rio500 - That's it. The Rio500 Utils at: http://rio500.sourceforge.net should be able to access the rio500. +Limits +====== + +You can use only a single rio500 device at a time with your computer. + Bugs ==== diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c index e13d77bfc222..9ba3a2ae36e5 100644 --- a/drivers/media/usb/siano/smsusb.c +++ b/drivers/media/usb/siano/smsusb.c @@ -389,6 +389,7 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id) struct smsusb_device_t *dev; void *mdev; int i, rc; + int align = 0; /* create device object */ dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL); @@ -400,6 +401,24 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id) dev->udev = interface_to_usbdev(intf); dev->state = SMSUSB_DISCONNECTED; + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + struct usb_endpoint_descriptor *desc = + &intf->cur_altsetting->endpoint[i].desc; + + if (desc->bEndpointAddress & USB_DIR_IN) { + dev->in_ep = desc->bEndpointAddress; + align = usb_endpoint_maxp(desc) - sizeof(struct sms_msg_hdr); + } else { + dev->out_ep = desc->bEndpointAddress; + } + } + + pr_debug("in_ep = %02x, out_ep = %02x\n", dev->in_ep, dev->out_ep); + if (!dev->in_ep || !dev->out_ep || align < 0) { /* Missing endpoints? */ + smsusb_term_device(intf); + return -ENODEV; + } + params.device_type = sms_get_board(board_id)->type; switch (params.device_type) { @@ -414,24 +433,12 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id) /* fall-thru */ default: dev->buffer_size = USB2_BUFFER_SIZE; - dev->response_alignment = - le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) - - sizeof(struct sms_msg_hdr); + dev->response_alignment = align; params.flags |= SMS_DEVICE_FAMILY2; break; } - for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { - if (intf->cur_altsetting->endpoint[i].desc. bEndpointAddress & USB_DIR_IN) - dev->in_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress; - else - dev->out_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress; - } - - pr_debug("in_ep = %02x, out_ep = %02x\n", - dev->in_ep, dev->out_ep); - params.device = &dev->udev->dev; params.usb_device = dev->udev; params.buffer_size = dev->buffer_size; diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 20ff036b4c22..9d6cb709ca7b 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -932,8 +932,8 @@ int usb_get_bos_descriptor(struct usb_device *dev) /* Get BOS descriptor */ ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE); - if (ret < USB_DT_BOS_SIZE) { - dev_err(ddev, "unable to get BOS descriptor\n"); + if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) { + dev_err(ddev, "unable to get BOS descriptor or descriptor too short\n"); if (ret >= 0) ret = -ENOMSG; kfree(bos); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 8bc35d53408b..6082b008969b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -209,6 +209,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Surface Dock Ethernet (RTL8153 GigE) */ + { USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM }, + /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */ { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index cadc01336bf8..7ba6afc7ef23 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -440,6 +440,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci, struct xhci_ep_priv *epriv; struct xhci_slot_priv *spriv = dev->debugfs_private; + if (!spriv) + return; + if (spriv->eps[ep_index]) return; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fed3385aeac0..feffceb31e8a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -656,6 +656,7 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, struct device *dev = xhci_to_hcd(xhci)->self.controller; struct xhci_segment *seg = td->bounce_seg; struct urb *urb = td->urb; + size_t len; if (!ring || !seg || !urb) return; @@ -666,11 +667,14 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, return; } - /* for in tranfers we need to copy the data from bounce to sg */ - sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf, - seg->bounce_len, seg->bounce_offs); dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len, DMA_FROM_DEVICE); + /* for in tranfers we need to copy the data from bounce to sg */ + len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, + seg->bounce_len, seg->bounce_offs); + if (len != seg->bounce_len) + xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n", + len, seg->bounce_len); seg->bounce_len = 0; seg->bounce_offs = 0; } @@ -3127,6 +3131,7 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, unsigned int unalign; unsigned int max_pkt; u32 new_buff_len; + size_t len; max_pkt = usb_endpoint_maxp(&urb->ep->desc); unalign = (enqd_len + *trb_buff_len) % max_pkt; @@ -3157,8 +3162,12 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, /* create a max max_pkt sized bounce buffer pointed to by last trb */ if (usb_urb_dir_out(urb)) { - sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs, + len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, new_buff_len, enqd_len); + if (len != seg->bounce_len) + xhci_warn(xhci, + "WARN Wrong bounce buffer write length: %zu != %d\n", + len, seg->bounce_len); seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, max_pkt, DMA_TO_DEVICE); } else { @@ -3423,11 +3432,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; + u64 addr; if (xhci_urb_suitable_for_idt(urb)) { - memcpy(&urb->transfer_dma, urb->transfer_buffer, + memcpy(&addr, urb->transfer_buffer, urb->transfer_buffer_length); field |= TRB_IDT; + } else { + addr = (u64) urb->transfer_dma; } remainder = xhci_td_remainder(xhci, 0, @@ -3440,8 +3452,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; queue_trb(xhci, ep_ring, true, - lower_32_bits(urb->transfer_dma), - upper_32_bits(urb->transfer_dma), + lower_32_bits(addr), + upper_32_bits(addr), length_field, field | ep_ring->cycle_state); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index a9bb796794e3..20db378a6012 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -52,7 +53,6 @@ static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring) return false; } -/* TODO: copied from ehci-hcd.c - can this be refactored? */ /* * xhci_handshake - spin reading hc until handshake completes or fails * @ptr: address of hc register to be read @@ -69,18 +69,16 @@ static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring) int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; + int ret; - do { - result = readl(ptr); - if (result == ~(u32)0) /* card removed */ - return -ENODEV; - result &= mask; - if (result == done) - return 0; - udelay(1); - usec--; - } while (usec > 0); - return -ETIMEDOUT; + ret = readl_poll_timeout_atomic(ptr, result, + (result & mask) == done || + result == U32_MAX, + 1, usec); + if (result == U32_MAX) /* card removed */ + return -ENODEV; + + return ret; } /* @@ -4320,7 +4318,6 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, pm_addr = ports[port_num]->addr + PORTPMSC; pm_val = readl(pm_addr); hlpm_addr = ports[port_num]->addr + PORTHLPMC; - field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); @@ -4332,6 +4329,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ + field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a450a99e90eb..7f8b950d1a73 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2160,7 +2160,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb) { if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) return true; return false; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 7b9adeb3e7aa..27e9c78a791e 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -51,7 +51,6 @@ struct rio_usb_data { char *obuf, *ibuf; /* transfer buffers */ char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ wait_queue_head_t wait_q; /* for timeouts */ - struct mutex lock; /* general race avoidance */ }; static DEFINE_MUTEX(rio500_mutex); @@ -63,10 +62,8 @@ static int open_rio(struct inode *inode, struct file *file) /* against disconnect() */ mutex_lock(&rio500_mutex); - mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { - mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return -EBUSY; } @@ -74,7 +71,6 @@ static int open_rio(struct inode *inode, struct file *file) init_waitqueue_head(&rio->wait_q); - mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); mutex_unlock(&rio500_mutex); @@ -86,9 +82,20 @@ static int close_rio(struct inode *inode, struct file *file) { struct rio_usb_data *rio = &rio_instance; - rio->isopen = 0; + /* against disconnect() */ + mutex_lock(&rio500_mutex); - dev_info(&rio->rio_dev->dev, "Rio closed.\n"); + rio->isopen = 0; + if (!rio->present) { + /* cleanup has been delayed */ + kfree(rio->ibuf); + kfree(rio->obuf); + rio->ibuf = NULL; + rio->obuf = NULL; + } else { + dev_info(&rio->rio_dev->dev, "Rio closed.\n"); + } + mutex_unlock(&rio500_mutex); return 0; } @@ -102,7 +109,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) int retries; int retval=0; - mutex_lock(&(rio->lock)); + mutex_lock(&rio500_mutex); /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { retval = -ENODEV; @@ -246,7 +253,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) err_out: - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return retval; } @@ -266,12 +273,12 @@ write_rio(struct file *file, const char __user *buffer, int errn = 0; int intr; - intr = mutex_lock_interruptible(&(rio->lock)); + intr = mutex_lock_interruptible(&rio500_mutex); if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -ENODEV; } @@ -294,7 +301,7 @@ write_rio(struct file *file, const char __user *buffer, goto error; } if (signal_pending(current)) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return bytes_written ? bytes_written : -EINTR; } @@ -332,12 +339,12 @@ write_rio(struct file *file, const char __user *buffer, buffer += copy_size; } while (count > 0); - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return bytes_written ? bytes_written : -EIO; error: - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return errn; } @@ -354,12 +361,12 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) char *ibuf; int intr; - intr = mutex_lock_interruptible(&(rio->lock)); + intr = mutex_lock_interruptible(&rio500_mutex); if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -ENODEV; } @@ -370,11 +377,11 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) while (count > 0) { if (signal_pending(current)) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return read_count ? read_count : -EINTR; } if (!rio->rio_dev) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -ENODEV; } this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; @@ -392,7 +399,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) count = this_read = partial; } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ if (!maxretry--) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); dev_err(&rio->rio_dev->dev, "read_rio: maxretry timeout\n"); return -ETIME; @@ -402,19 +409,19 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) finish_wait(&rio->wait_q, &wait); continue; } else if (result != -EREMOTEIO) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); dev_err(&rio->rio_dev->dev, "Read Whoops - result:%d partial:%u this_read:%u\n", result, partial, this_read); return -EIO; } else { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return (0); } if (this_read) { if (copy_to_user(buffer, ibuf, this_read)) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -EFAULT; } count -= this_read; @@ -422,7 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) buffer += this_read; } } - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return read_count; } @@ -447,15 +454,23 @@ static int probe_rio(struct usb_interface *intf, { struct usb_device *dev = interface_to_usbdev(intf); struct rio_usb_data *rio = &rio_instance; - int retval; + int retval = 0; - dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); + mutex_lock(&rio500_mutex); + if (rio->present) { + dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum); + retval = -EBUSY; + goto bail_out; + } else { + dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); + } retval = usb_register_dev(intf, &usb_rio_class); if (retval) { dev_err(&dev->dev, "Not able to get a minor for this device.\n"); - return -ENOMEM; + retval = -ENOMEM; + goto bail_out; } rio->rio_dev = dev; @@ -464,7 +479,8 @@ static int probe_rio(struct usb_interface *intf, dev_err(&dev->dev, "probe_rio: Not enough memory for the output buffer\n"); usb_deregister_dev(intf, &usb_rio_class); - return -ENOMEM; + retval = -ENOMEM; + goto bail_out; } dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf); @@ -473,16 +489,17 @@ static int probe_rio(struct usb_interface *intf, "probe_rio: Not enough memory for the input buffer\n"); usb_deregister_dev(intf, &usb_rio_class); kfree(rio->obuf); - return -ENOMEM; + retval = -ENOMEM; + goto bail_out; } dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf); - mutex_init(&(rio->lock)); - usb_set_intfdata (intf, rio); rio->present = 1; +bail_out: + mutex_unlock(&rio500_mutex); - return 0; + return retval; } static void disconnect_rio(struct usb_interface *intf) @@ -494,12 +511,10 @@ static void disconnect_rio(struct usb_interface *intf) if (rio) { usb_deregister_dev(intf, &usb_rio_class); - mutex_lock(&(rio->lock)); if (rio->isopen) { rio->isopen = 0; /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; - mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return; } @@ -509,7 +524,6 @@ static void disconnect_rio(struct usb_interface *intf) dev_info(&intf->dev, "USB Rio disconnected.\n"); rio->present = 0; - mutex_unlock(&(rio->lock)); } mutex_unlock(&rio500_mutex); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 9560fde621ee..ea06f1fed6fa 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3029,6 +3029,13 @@ static int sisusb_probe(struct usb_interface *intf, mutex_init(&(sisusb->lock)); + sisusb->sisusb_dev = dev; + sisusb->vrambase = SISUSB_PCI_MEMBASE; + sisusb->mmiobase = SISUSB_PCI_MMIOBASE; + sisusb->mmiosize = SISUSB_PCI_MMIOSIZE; + sisusb->ioportbase = SISUSB_PCI_IOPORTBASE; + /* Everything else is zero */ + /* Register device */ retval = usb_register_dev(intf, &usb_sisusb_class); if (retval) { @@ -3039,13 +3046,7 @@ static int sisusb_probe(struct usb_interface *intf, goto error_1; } - sisusb->sisusb_dev = dev; - sisusb->minor = intf->minor; - sisusb->vrambase = SISUSB_PCI_MEMBASE; - sisusb->mmiobase = SISUSB_PCI_MMIOBASE; - sisusb->mmiosize = SISUSB_PCI_MMIOSIZE; - sisusb->ioportbase = SISUSB_PCI_IOPORTBASE; - /* Everything else is zero */ + sisusb->minor = intf->minor; /* Allocate buffers */ sisusb->ibufsize = SISUSB_IBUF_SIZE; diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c index 62c57ddc554e..b7c86ccd50b4 100644 --- a/drivers/usb/mtu3/mtu3_debugfs.c +++ b/drivers/usb/mtu3/mtu3_debugfs.c @@ -528,8 +528,7 @@ void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb) void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb) { - ssusb->dbgfs_root = - debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root); + ssusb->dbgfs_root = debugfs_create_dir(dev_name(ssusb->dev), NULL); } void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb) diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index c0d6ff1baa72..7931e6cecc70 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -301,9 +301,17 @@ static int stub_probe(struct usb_device *udev) const char *udev_busid = dev_name(&udev->dev); struct bus_id_priv *busid_priv; int rc = 0; + char save_status; dev_dbg(&udev->dev, "Enter probe\n"); + /* Not sure if this is our device. Allocate here to avoid + * calling alloc while holding busid_table lock. + */ + sdev = stub_device_alloc(udev); + if (!sdev) + return -ENOMEM; + /* check we should claim or not by busid_table */ busid_priv = get_busid_priv(udev_busid); if (!busid_priv || (busid_priv->status == STUB_BUSID_REMOV) || @@ -318,6 +326,9 @@ static int stub_probe(struct usb_device *udev) * See driver_probe_device() in driver/base/dd.c */ rc = -ENODEV; + if (!busid_priv) + goto sdev_free; + goto call_put_busid_priv; } @@ -337,12 +348,6 @@ static int stub_probe(struct usb_device *udev) goto call_put_busid_priv; } - /* ok, this is my device */ - sdev = stub_device_alloc(udev); - if (!sdev) { - rc = -ENOMEM; - goto call_put_busid_priv; - } dev_info(&udev->dev, "usbip-host: register new device (bus %u dev %u)\n", @@ -352,9 +357,16 @@ static int stub_probe(struct usb_device *udev) /* set private data to usb_device */ dev_set_drvdata(&udev->dev, sdev); + busid_priv->sdev = sdev; busid_priv->udev = udev; + save_status = busid_priv->status; + busid_priv->status = STUB_BUSID_ALLOC; + + /* release the busid_lock */ + put_busid_priv(busid_priv); + /* * Claim this hub port. * It doesn't matter what value we pass as owner @@ -372,10 +384,8 @@ static int stub_probe(struct usb_device *udev) dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid); goto err_files; } - busid_priv->status = STUB_BUSID_ALLOC; - rc = 0; - goto call_put_busid_priv; + return 0; err_files: usb_hub_release_port(udev->parent, udev->portnum, @@ -384,23 +394,30 @@ err_port: dev_set_drvdata(&udev->dev, NULL); usb_put_dev(udev); + /* we already have busid_priv, just lock busid_lock */ + spin_lock(&busid_priv->busid_lock); busid_priv->sdev = NULL; - stub_device_free(sdev); + busid_priv->status = save_status; + spin_unlock(&busid_priv->busid_lock); + /* lock is released - go to free */ + goto sdev_free; call_put_busid_priv: + /* release the busid_lock */ put_busid_priv(busid_priv); + +sdev_free: + stub_device_free(sdev); + return rc; } static void shutdown_busid(struct bus_id_priv *busid_priv) { - if (busid_priv->sdev && !busid_priv->shutdown_busid) { - busid_priv->shutdown_busid = 1; - usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED); + usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED); - /* wait for the stop of the event handler */ - usbip_stop_eh(&busid_priv->sdev->ud); - } + /* wait for the stop of the event handler */ + usbip_stop_eh(&busid_priv->sdev->ud); } /* @@ -427,11 +444,16 @@ static void stub_disconnect(struct usb_device *udev) /* get stub_device */ if (!sdev) { dev_err(&udev->dev, "could not get device"); - goto call_put_busid_priv; + /* release busid_lock */ + put_busid_priv(busid_priv); + return; } dev_set_drvdata(&udev->dev, NULL); + /* release busid_lock before call to remove device files */ + put_busid_priv(busid_priv); + /* * NOTE: rx/tx threads are invoked for each usb_device. */ @@ -442,27 +464,36 @@ static void stub_disconnect(struct usb_device *udev) (struct usb_dev_state *) udev); if (rc) { dev_dbg(&udev->dev, "unable to release port\n"); - goto call_put_busid_priv; + return; } /* If usb reset is called from event handler */ if (usbip_in_eh(current)) - goto call_put_busid_priv; + return; + + /* we already have busid_priv, just lock busid_lock */ + spin_lock(&busid_priv->busid_lock); + if (!busid_priv->shutdown_busid) + busid_priv->shutdown_busid = 1; + /* release busid_lock */ + spin_unlock(&busid_priv->busid_lock); /* shutdown the current connection */ shutdown_busid(busid_priv); usb_put_dev(sdev->udev); + /* we already have busid_priv, just lock busid_lock */ + spin_lock(&busid_priv->busid_lock); /* free sdev */ busid_priv->sdev = NULL; stub_device_free(sdev); if (busid_priv->status == STUB_BUSID_ALLOC) busid_priv->status = STUB_BUSID_ADDED; - -call_put_busid_priv: - put_busid_priv(busid_priv); + /* release busid_lock */ + spin_unlock(&busid_priv->busid_lock); + return; } #ifdef CONFIG_PM