Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linux

Documentation/ABI/testing/sysfs-kernel-slab

@@ -0,0 +1,479 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file is read-only and specifies how many
+		objects have been allocated using the fast path.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file is read-only and specifies how
+		many times a cpu slab has been full and it has been refilled
+		by using a slab from the list of partially used slabs.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file is read-only and specifies how many
+		times the per-cpu freelist was empty but there were objects
+		available as the result of remote cpu frees.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is read-only and specifies how many times
+		a new slab had to be allocated from the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file is read-only and specifies how many
+		objects have been allocated using the slow path because of a
+		refill or allocation from a partial or new slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush is read-only and specifies how many
+		times a cache's cpu slabs have been flushed as the result of
+		destroying or shrinking a cache, a cpu going offline, or as
+		the result of forcing an allocation from a certain node.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_empty is read-only and specifies how many
+		times an empty cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_full is read-only and specifies how many
+		times a full cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_remote_frees is read-only and specifies how
+		many times a cpu slab has been deactivated and contained free
+		objects that were freed remotely.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_head is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		head of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_tail is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		tail of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_add_partial is read-only and specifies how many
+		times an object has been freed in a full slab so that it had to
+		added to its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file is read-only and specifies how many
+		objects have been freed using the fast path because it was an
+		object from the cpu slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file is read-only and specifies how many
+		objects have been freed to a frozen slab (i.e. a remote cpu
+		slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_remove_partial is read-only and specifies how
+		many times an object has been freed to a now-empty slab so
+		that it had to be removed from its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file is read-only and specifies how many times an
+		empty slab has been freed back to the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file is read-only and specifies how many
+		objects have been freed using the slow path (i.e. to a full or
+		partial slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file order_fallback is read-only and specifies how many
+		times an allocation of a new slab has not been possible at the
+		cache's order and instead fallen back to its minimum possible
+		order.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.

Documentation/DocBook/kgdb.tmpl

@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">

Documentation/filesystems/tmpfs.txt

@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 4 June 2007
+   Hugh Dickins, 4 June 2007

Documentation/input/multi-touch-protocol.txt

@@ -18,8 +18,12 @@ Usage
 Anonymous finger details are sent sequentially as separate packets of ABS
 events. Only the ABS_MT events are recognized as part of a finger
 packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
@@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
 ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
 device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
 of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else.  Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
 
 
 Event Semantics
@@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
 surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
 
 ABS_MT_TOUCH_MINOR
 
 The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
 
 ABS_MT_WIDTH_MAJOR
 
 The length, in surface units, of the major axis of the approaching
 tool. This should be understood as the size of the tool itself. The
 orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
 
 ABS_MT_WIDTH_MINOR
 
 The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
 
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@ different characteristic widths [1].
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned.  Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
 
 ABS_MT_POSITION_X
 
@@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
 contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+   ABS_MT_TOUCH_MAJOR := max(X, Y)
+   ABS_MT_TOUCH_MINOR := min(X, Y)
+   ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
 
 
 Finger Tracking
@@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
 anonymous contacts currently on the surface. The order in which the packets
 appear in the event stream is not important.
 
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
 initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
 unique until the contact vanishes (when the finger leaves the surface). The
 problem of assigning a set of anonymous fingers to a set of identified
 fingers is a euclidian bipartite matching problem at each event update, and
 relies on a sufficiently rapid update rate.
 
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
 Notes
 -----
 
@@ -136,5 +189,7 @@ could be used to derive tilt.
 time of writing (April 2009), the MT protocol is not yet merged, and the
 prototype implements finger matching, basic mouse support and two-finger
 scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
 implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.

Documentation/kernel-parameters.txt

@@ -1545,6 +1545,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
 	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.

Documentation/networking/ip-sysctl.txt

@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
-UNDOCUMENTED:
 
 /proc/sys/net/core/*
-	dev_weight FIXME
+dev_weight - INTEGER
+	The maximum number of packets that kernel can handle on a NAPI
+	interrupt, it's a Per-CPU variable.
+
+	Default: 64
 
 /proc/sys/net/unix/*
-	max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+	The maximum length of dgram socket receive queue
+
+	Default: 10
+
+
+UNDOCUMENTED:
 
 /proc/sys/net/irda/*
 	fast_poll_increase FIXME

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
   ref-no-jd	Reference board without HP/Mic jack detection
   3stack	D965 3stack
   5stack	D965 5stack + SPDIF
+  5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
   auto		BIOS setup (default)

Documentation/sound/alsa/Procfile.txt

@@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
 	When this value is greater than 1, the driver will show the
 	stack trace additionally.  This may help the debugging.
 
+	Since 2.6.30, this option also enables the hwptr check using
+	jiffies.  This detects spontaneous invalid pointer callback
+	values, but can be lead to too much corrections for a (mostly
+	buggy) hardware that doesn't give smooth pointer updates.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

Documentation/sysctl/vm.txt

@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.

Documentation/sysfs-rules.txt

@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.

MAINTAINERS

@@ -434,7 +434,7 @@ F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 P:	Thomas Dahlmann
-M:	thomas.dahlmann@amd.com
+M:	dahlmann.thomas@arcor.de
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -1132,17 +1132,17 @@ F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Bryan Wu
-M:	cooloney@kernel.org
+P:	Mike Frysinger
+M:	vapier@gentoo.org
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Bryan Wu
-M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P:	Michael Hennerich
+M:	michael.hennerich@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
@@ -1150,7 +1150,7 @@ F:	drivers/net/bfin_mac.*
 BLACKFIN RTC DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
@@ -1158,7 +1158,7 @@ F:	drivers/rtc/rtc-bfin.c
 BLACKFIN SERIAL DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
@@ -1166,7 +1166,7 @@ F:	drivers/serial/bfin_5xx.c
 BLACKFIN WATCHDOG DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1174,7 @@ F:	drivers/watchdog/bfin_wdt.c
 BLACKFIN I2C TWI DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
@@ -1431,6 +1431,14 @@ P:	Russell King
 M:	linux@arm.linux.org.uk
 F:	include/linux/clk.h
 
+CISCO FCOE HBA DRIVER
+P:	Abhijeet Joglekar
+M:	abjoglek@cisco.com
+P:	Joe Eykholt
+M:	jeykholt@cisco.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1963,8 +1971,8 @@ F:	include/linux/edac.h
 
 EDAC-E752X
 P:	Mark Gross
-P:	Doug Thompson
 M:	mark.gross@intel.com
+P:	Doug Thompson
 M:	dougthompson@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
@@ -5578,6 +5586,14 @@ M:	ian@mnementh.co.uk
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
+TMPFS (SHMEM FILESYSTEM)
+P:	Hugh Dickins
+M:	hugh.dickins@tiscali.co.uk
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/shmem_fs.h
+F:	mm/shmem.c
+
 TPM DEVICE DRIVER
 P:	Debora Velarde
 M:	debora@linux.vnet.ibm.com

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc5
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc7
+NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/alpha/include/asm/percpu.h

@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */

arch/arm/Kconfig

@@ -273,6 +273,7 @@ config ARCH_EP93XX
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -976,10 +977,9 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default y
-	depends on FLATMEM
+	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE

arch/arm/common/gic.c

@@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 }
 
 #ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-	unsigned long map = *cpus_addr(cpumask);
+	unsigned long map = *cpus_addr(*mask);
 
 	/* this always happens on GIC0 */
 	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);

arch/arm/include/asm/flat.h

@@ -5,9 +5,6 @@
 #ifndef __ARM_FLAT_H__
 #define __ARM_FLAT_H__
 
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/arm/include/asm/hardware/gic.h

@@ -36,7 +36,7 @@
 void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
 void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 #endif
 
 #endif

arch/arm/include/asm/smp.h

@@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
 
 /*
  * Broadcast a clock event to other CPUs.
  */
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
 extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * Local timer interrupt handling function (can be IPI'ed).

arch/arm/kernel/smp.c

@@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
 	unsigned long flags;
 	unsigned int cpu;
 
 	local_irq_save(flags);
 
-	for_each_cpu_mask(cpu, callmap) {
+	for_each_cpu(cpu, mask) {
 		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 
 		spin_lock(&ipi->lock);
@@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(callmap);
+	smp_cross_call(mask);
 
 	local_irq_restore(flags);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 void show_ipi_list(struct seq_file *p)
@@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_send_timer(void)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
@@ -517,7 +510,7 @@ void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_CPU_STOP);
+	send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
@@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
 	return -EINVAL;
 }
 
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+		const struct cpumask *mask)
 {
-	int ret = 0;
-
 	preempt_disable();
 
-	ret = smp_call_function_mask(mask, func, info, wait);
-	if (cpu_isset(smp_processor_id(), mask))
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
 		func(info);
 
 	preempt_enable();
-
-	return ret;
 }
 
 /**********************************************************************/
@@ -602,20 +592,17 @@ void flush_tlb_all(void)
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t mask = mm->cpu_vm_mask;
-
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = uaddr;
 
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)

arch/arm/mach-davinci/include/mach/asp.h

@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */

arch/arm/mach-ep93xx/clock.c

@@ -21,15 +21,50 @@
 #include <asm/div64.h>
 #include <mach/hardware.h>
 
+
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+
 struct clk {
 	unsigned long	rate;
 	int		users;
+	int		sw_locked;
 	u32		enable_reg;
 	u32		enable_mask;
+
+	unsigned long	(*get_rate)(struct clk *clk);
 };
 
-static struct clk clk_uart = {
-	.rate		= 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart2 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart3 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
 static struct clk clk_f;
@@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart),
-	INIT_CK("apb:uart2", NULL, &clk_uart),
-	INIT_CK("apb:uart3", NULL, &clk_uart),
+	INIT_CK("apb:uart1", NULL, &clk_uart1),
+	INIT_CK("apb:uart2", NULL, &clk_uart2),
+	INIT_CK("apb:uart3", NULL, &clk_uart3),
 	INIT_CK(NULL, "pll1", &clk_pll1),
 	INIT_CK(NULL, "fclk", &clk_f),
 	INIT_CK(NULL, "hclk", &clk_h),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value | clk->enable_mask, clk->enable_reg);
 	}
 
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
 
+static unsigned long get_uart_rate(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+		return EP93XX_EXT_CLK_RATE;
+	else
+		return EP93XX_EXT_CLK_RATE / 2;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = 14745600;
+	rate = EP93XX_EXT_CLK_RATE;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = 14745600;
+		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = 14745600;
+		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -159,7 +159,10 @@
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
 #define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)

arch/arm/mach-integrator/core.c

@@ -121,7 +121,7 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
 	}
 
 	if (!found)
-		return -ENOSYS;
+		return -ENODEV;
 	return 0;
 }
 

arch/arm/mach-l7200/include/mach/sys-clock.h

@@ -18,7 +18,7 @@
 
 /* IO_START and IO_BASE are defined in hardware.h */
 
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
 #define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
 
 /* Define the interface to the SYS_CLOCK */

arch/arm/mach-omap2/clock24xx.c

@@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
@@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
 	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),

arch/arm/mach-omap2/clock34xx.c

@@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
-	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),

arch/arm/mach-omap2/clock34xx.h

@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,

arch/arm/mach-omap2/devices.c

@@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	platform_device_register(&omap2_mcspi3);
+	if (cpu_is_omap2430() || cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi3);
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	platform_device_register(&omap2_mcspi4);
+	if (cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi4);
 #endif
 }
 

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -409,7 +409,7 @@
 /* PM_PREPWSTST_CAM specific bits */
 
 /* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
 
 /* RM_RSTST_PER specific bits */
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
 	unsigned	sysclk_ps;
 	int		status;
 
-	if (!refclk_psec || sysclk_ps == 0)
+	if (!refclk_psec || fclk_ps == 0)
 		return -ENODEV;
 
 	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;

arch/arm/mach-pxa/viper.c

@@ -46,6 +46,7 @@
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
+#include <mach/regs-uart.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>

arch/arm/mach-realview/core.c

@@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	/*
-	 * The dummy clock device has to be registered before the main device
-	 * so that the latter will broadcast the clock events
-	 */
-	local_timer_setup();
-#endif
-
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz

arch/arm/mach-realview/include/mach/smp.h

@@ -15,16 +15,9 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(cpumask_t callmap)
-{
-	gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
 {
+	gic_raise_softirq(mask, 1);
 }
 
 #endif

arch/arm/mach-realview/localtimer.c

@@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
+	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 400;
 	clk->mult               = 1;
 	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;

arch/arm/mach-realview/platsmp.c

@@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	trace_hardirqs_off();
 
-	/*
-	 * the primary core may have used a "cross call" soft interrupt
-	 * to get this processor out of WFI in the BootMonitor - make
-	 * sure that we are no longer being sent this soft interrupt
-	 */
-	smp_cross_call_done(cpumask_of_cpu(cpu));
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
@@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Use smp_cross_call() for this, since there's little
 	 * point duplicating the code here
 	 */
-	smp_cross_call(cpumask_of_cpu(cpu));
+	smp_cross_call(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
 	/*
-	 * Enable the local timer for primary CPU. If the device is
-	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
-	 * realview_timer_init
+	 * Enable the local timer or broadcast device for the boot CPU.
 	 */
 	local_timer_setup();
 #endif

arch/arm/mach-s3c2410/mach-bast.c

@@ -588,8 +588,6 @@ static void __init bast_map_io(void)
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
 
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
@@ -602,6 +600,7 @@ static void __init bast_init(void)
 	sysdev_class_register(&bast_pm_sysclass);
 	sysdev_register(&bast_pm_sysdev);
 
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 

arch/arm/mach-versatile/core.c

@@ -413,7 +413,7 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,

arch/arm/nwfpe/fpa11.h

@@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
 extern unsigned int DoubleCPDO(struct roundingData *roundData,
 			       const unsigned int opcode, FPREG * rFd);
 
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+				 const unsigned int opcode, FPREG * rFd);
+
 #endif

arch/arm/nwfpe/fpa11_cprt.c

@@ -27,10 +27,6 @@
 #include "fpmodule.inl"
 #include "softfloat.h"
 
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 

arch/arm/nwfpe/softfloat.h

@@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
 char floatx80_lt_quiet( floatx80, floatx80 );
 char floatx80_is_signaling_nan( floatx80 );
 
+extern flag floatx80_is_nan(floatx80);
+
 #endif
 
 static inline flag extractFloat32Sign(float32 a)

arch/arm/plat-omap/fb.c

@@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
 			config_invalid = 1;
 			return;
 		}
-		if (rg.paddr)
+		if (rg.paddr) {
 			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
-		reserved += rg.size;
+			reserved += rg.size;
+		}
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}

arch/arm/plat-omap/gpio.c

@@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 160)
+	if (cpu_is_omap34xx() && gpio < 192)
 		return 0;
 	return -1;
 }

arch/arm/plat-s3c/clock.c

@@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
 
 int s3c24xx_register_clock(struct clk *clk)
 {
-	clk->owner = THIS_MODULE;
-
 	if (clk->enable == NULL)
 		clk->enable = clk_null_enable;
 

arch/arm/plat-s3c/include/plat/nand.h

@@ -10,19 +10,26 @@
  * published by the Free Software Foundation.
 */
 
-/* struct s3c2410_nand_set
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc:	Entirely disable ECC - Dangerous
+ * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
+ *			Setting this flag will allow the kernel to
+ *			look for it at boot time and also skip the NAND
+ *			scan.
+ * @nr_chips:		Number of chips in this set
+ * @nr_partitions:	Number of partitions pointed to by @partitions
+ * @name:		Name of set (optional)
+ * @nr_map:		Map for low-layer logical to physical chip numbers (option)
+ * @partitions:		The mtd partition list
  *
- * define an set of one or more nand chips registered with an unique mtd
- *
- * nr_chips	 = number of chips in this set
- * nr_partitions = number of partitions pointed to be partitoons (or zero)
- * name		 = name of set (optional)
- * nr_map	 = map for low-layer logical to physical chip numbers (option)
- * partitions	 = mtd partition list
-*/
-
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
 struct s3c2410_nand_set {
-	unsigned int		disable_ecc : 1;
+	unsigned int		disable_ecc:1;
+	unsigned int		flash_bbt:1;
 
 	int			nr_chips;
 	int			nr_partitions;
@@ -39,7 +46,7 @@ struct s3c2410_platform_nand {
 	int	twrph0;	/* active time for nWE/nOE */
 	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
 
-	unsigned int	ignore_unset_ecc : 1;
+	unsigned int	ignore_unset_ecc:1;
 
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;

arch/arm/plat-s3c24xx/dma.c

@@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
 
 EXPORT_SYMBOL(s3c2410_dma_getposition);
 
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
 {
 	return container_of(dev, struct s3c2410_dma_chan, dev);
 }

arch/arm/plat-s3c64xx/gpiolib.c

@@ -57,7 +57,7 @@
 #if 1
 #define gpio_dbg(x...) do { } while(0)
 #else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
 #endif
 
 /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where

arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h

@@ -61,14 +61,14 @@
 #define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
 #define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
 
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
 
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)

arch/blackfin/include/asm/.gitignore

@@ -1 +0,0 @@
-+mach

arch/blackfin/include/asm/flat.h

@@ -10,7 +10,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp)	/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 

arch/blackfin/include/asm/unistd.h

@@ -378,8 +378,10 @@
 #define __NR_dup3		363
 #define __NR_pipe2		364
 #define __NR_inotify_init1	365
+#define __NR_preadv		366
+#define __NR_pwritev		367
 
-#define __NR_syscall		366
+#define __NR_syscall		368
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/.gitignore

@@ -0,0 +1 @@
+vmlinux.lds

arch/blackfin/lib/strncmp.c

@@ -8,9 +8,8 @@
 
 #define strncmp __inline_strncmp
 #include <asm/string.h>
-#undef strncmp
-
 #include <linux/module.h>
+#undef strncmp
 
 int strncmp(const char *cs, const char *ct, size_t count)
 {

arch/blackfin/mach-common/entry.S

@@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
 	.long _sys_dup3
 	.long _sys_pipe2
 	.long _sys_inotify_init1	/* 365 */
+	.long _sys_preadv
+	.long _sys_pwritev
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/cris/Makefile

@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=

arch/cris/arch-v10/boot/compressed/README

@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and 
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img. 
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn

arch/cris/arch-v10/boot/compressed/misc.c

@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n)     memset((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { \
-		if (!(cond)) \
-			error(msg); \
-	} while (0)
-#  define Trace(x) fprintf x
-#  define Tracev(x) do { \
-		if (verbose) \
-			fprintf x; \
-	} while (0)
-#  define Tracevv(x) do { \
-		if (verbose > 1) \
-			fprintf x; \
-	} while (0)
-#  define Tracec(c, x) do { \
-		if (verbose && (c)) \
-			fprintf x; \
-	} while (0)
-#  define Tracecv(c, x) do { \
-		if (verbose > 1 && (c)) \
-			fprintf x; \
-	} while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
-		*R_SERIAL3_TR_DATA = *s++;
-#endif
-	}
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out = *in;
-		out++;
-		in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
-
-	while (1);	/* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
-	char revision;
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	*R_SERIAL0_XOFF = 0;
-	*R_SERIAL0_BAUD = 0x99;
-	*R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	*R_SERIAL1_XOFF = 0;
-	*R_SERIAL1_BAUD = 0x99;
-	*R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	*R_GEN_CONFIG = 0x08;
-	*R_SERIAL2_XOFF = 0;
-	*R_SERIAL2_BAUD = 0x99;
-	*R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	*R_GEN_CONFIG = 0x100;
-	*R_SERIAL3_XOFF = 0;
-	*R_SERIAL3_BAUD = 0x99;
-	*R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 10) {
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while (1);
-	}
-
-	puts("Uncompressing Linux...\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\n");
-}

arch/cris/arch-v10/kernel/entry.S

@@ -536,10 +536,10 @@ multiple_interrupt:
 	movem	$r13, [$sp]
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
-	
+
 	move.d  $sp, $r10
 	jsr	do_multiple_IRQ
-	
+
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
 	pop	$r0			; Restore r0. 
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
-	
+
 	.global kernel_execve
 kernel_execve:
 	move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/Makefile

@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'

arch/cris/arch-v32/boot/compressed/Makefile

@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)

arch/cris/arch-v32/boot/rescue/Makefile

@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-		-I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD      $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)

arch/cris/arch-v32/drivers/mach-a3/gpio.c

@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) |
 			(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRBITS:
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) &
 			~(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		/* Set alarm when bits with 1 in arg go high. */

arch/cris/arch-v32/kernel/Makefile

@@ -9,8 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o

arch/cris/arch-v32/kernel/entry.S

@@ -852,6 +852,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime       /* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/boot/Makefile

@@ -1,8 +1,12 @@
 #
-# arch/cris/arch-v10/boot/Makefile
+# arch/cris/boot/Makefile
 #
 
-OBJCOPYFLAGS = -O binary --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
 
 subdir- := compressed rescue
 targets := Image

arch/cris/boot/compressed/Makefile

@@ -1,11 +1,23 @@
 #
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
 #
 
 asflags-y += $(LINUXINCLUDE)
 ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# 				    -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# 					-I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 
 $(obj)/piggy.gz: $(obj)/../Image FORCE
 	$(call if_changed,gzip)
-

arch/cris/boot/compressed/head_v10.S

@@ -30,7 +30,7 @@
 	beq	dram_init_finished
 	nop
 
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
 
 dram_init_finished:
 
@@ -123,4 +123,4 @@ _cmd_line_magic:
 	.dword 0
 _cmd_line_addr:
 	.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"

arch/cris/boot/compressed/head_v32.S

@@ -17,7 +17,7 @@
 	.globl	input_data
 
 	.text
-_start:
+start:
 	di
 
 	;; Start clocks for used blocks.
@@ -29,9 +29,9 @@ _start:
 	nop
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif
@@ -137,9 +137,9 @@ _boot_source:
 	.dword 0
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif

arch/cris/boot/compressed/misc.c

@@ -18,8 +18,9 @@
 
 #define KERNEL_LOAD_ADR 0x40004000
 
-
 #include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/reg_map.h>
 #include <hwregs/ser_defs.h>
@@ -27,6 +28,9 @@
 #ifdef CONFIG_CRIS_MACH_ARTPEC3
 #include <hwregs/clkgen_defs.h>
 #endif
+#else
+#include <arch/svinto.h>
+#endif
 
 /*
  * gzip declarations
@@ -35,12 +39,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -68,27 +70,43 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
 
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
 static void flush_window(void);
 static void error(char *m);
+static void puts(const char *);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -96,10 +114,6 @@ static long bytes_out;
 static uch *output_data;
 static unsigned long output_ptr;
 
-static void error(char *m);
-
-static void puts(const char *);
-
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
 
 /* decompressor info and error messages to serial console */
 
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
 {
 	reg_ser_rs_stat_din rs;
 	reg_ser_rw_dout dout = {.data = *s};
@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#endif
 
-static void
-puts(const char *s)
+static void puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser0);
+#else
+		while (!(*R_SERIAL0_STATUS & (1 << 5)))
+			;
+		*R_SERIAL0_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser1);
+#else
+		while (!(*R_SERIAL1_STATUS & (1 << 5)))
+			;
+		*R_SERIAL1_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser2);
+#else
+		while (!(*R_SERIAL2_STATUS & (1 << 5)))
+			;
+		*R_SERIAL2_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser3);
+#else
+		while (!(*R_SERIAL3_STATUS & (1 << 5)))
+			;
+		*R_SERIAL3_TR_DATA = *s++;
+#endif
 #endif
 		*s++;
 	}
@@ -147,8 +185,7 @@ puts(const char *s)
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
 	char *ss = (char*)s;
@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
 	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
 
 	return __dest;
 }
@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
 
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
-	puts("\r\n\n");
+	puts("\n\n");
 	puts(x);
-	puts("\r\n\n -- System halted\n");
+	puts("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
 {
 	reg_ser_rw_xoff xoff;
 	reg_ser_rw_tr_ctrl tr_ctrl;
@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
 	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
 	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
 }
+#endif
 
-void
-decompress_kernel(void)
+void decompress_kernel(void)
 {
 	char revision;
+	char compile_rev;
 
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
     defined(CONFIG_ETRAX_DEBUG_PORT2) || \
     defined(CONFIG_ETRAX_DEBUG_PORT3)
@@ -277,6 +316,7 @@ decompress_kernel(void)
 	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
 #endif
 
+
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
 	serial_setup(regi_ser0);
 #endif
@@ -300,19 +340,52 @@ decompress_kernel(void)
 
 	/* input_data is set in head.S */
 	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
 
 	setup_normal_output_buffer();
 
 	makecrc();
 
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 32)
-	{
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\r\n");
+	puts("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel.\r\n");
+	puts("Done. Now booting the kernel\n");
 }

arch/cris/boot/rescue/Makefile

@@ -2,16 +2,26 @@
 # Makefile for rescue (bootstrap) code
 #
 
-ccflags-y += -O2 $(LINUXINCLUDE)
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# 				    -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
 asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
 OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
 
 targets := rescue.o rescue.bin
 
-$(obj)/rescue.o: $(OBJECT) FORCE
+$(obj)/rescue.o: $(OBJECTS) FORCE
 	$(call if_changed,ld)
 
 $(obj)/rescue.bin: $(obj)/rescue.o FORCE
@@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
 	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
 	rm tr.bin tmp2423 testrescue_tmp.bin
 
+
 $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
 # Pad it to 784 bytes, that's what the rescue loader expects
@@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
 	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
 	rm ktr.bin tmp2423 kimagerescue_tmp.bin
+

arch/cris/boot/rescue/head_v10.S

@@ -155,7 +155,7 @@ no_newjump:
 #endif
 
 	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
+#include "../../../arch-v10/lib/dram_init.S"
 
 	;; we now should go through the checksum-table and check the listed
 	;; partitions for errors.

arch/cris/include/asm/unistd.h

@@ -281,7 +281,7 @@
 #define __NR_mbind		274
 #define __NR_get_mempolicy	275
 #define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
+#define __NR_mq_open		277
 #define __NR_mq_unlink		(__NR_mq_open+1)
 #define __NR_mq_timedsend	(__NR_mq_open+2)
 #define __NR_mq_timedreceive	(__NR_mq_open+3)
@@ -331,10 +331,18 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 327
+#define NR_syscalls 335
 
 #include <arch/unistd.h>
 

arch/h8300/include/asm/flat.h

@@ -5,7 +5,6 @@
 #ifndef __H8300_FLAT_H__
 #define __H8300_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		1
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/m32r/include/asm/flat.h

@@ -12,7 +12,6 @@
 #ifndef __ASM_M32R_FLAT_H
 #define __ASM_M32R_FLAT_H
 
-#define	flat_stack_align(sp)		(*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_set_persistent(relval, p)		0

arch/m68k/include/asm/flat.h

@@ -5,7 +5,6 @@
 #ifndef __M68KNOMMU_FLAT_H__
 #define __M68KNOMMU_FLAT_H__
 
-#define	flat_stack_align(sp)			/* nothing needed */
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/microblaze/configs/nommu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -80,6 +82,8 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Exectuable file formats
@@ -180,7 +185,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -601,8 +613,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
@@ -777,6 +789,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -784,6 +797,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y

arch/microblaze/kernel/intc.c

@@ -137,8 +137,8 @@ void __init init_IRQ(void)
 
 	intr_type =
 		*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
-	if (intr_type >= (1 << nr_irq))
-		printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+	if (intr_type >= (1 << (nr_irq + 1)))
+		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 
 #ifdef CONFIG_SELFMOD_INTC
 	selfmod_function((int *) arr_func, intc_baseaddr);

arch/mips/Kconfig

@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on EXPERIMENTAL && CPU_R8000
+	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
-	  only on the R8000 processor.  Not that at the time of this writing
-	  this option is still high experimental; there are also issues with
-	  compatibility of user applications.
+	  only on R8000 and cnMIPS processors.  Note that you will need a
+	  suitable Linux distribution to support this.
 
 config PAGE_SIZE_16KB
 	bool "16kB"
@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
 	  all non-R3000 family processors.  Note that you will need a suitable
 	  Linux distribution to support this.
 
+config PAGE_SIZE_32KB
+	bool "32kB"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Using 32kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on cnMIPS cores.  Note that you will need a suitable Linux
+	  distribution to support this.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
 	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
@@ -1958,10 +1966,6 @@ config SECCOMP
 
 endmenu
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y

arch/mips/Makefile

@@ -14,8 +14,6 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y := -ffunction-sections
-
 #
 # Select the object file format to substitute into the linker script.
 #
@@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
 vmlinux-32		= vmlinux
@@ -472,12 +473,12 @@ endif
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
 ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
-      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
   endif
 endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #

arch/mips/alchemy/common/time.c

@@ -44,7 +44,7 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
 }

arch/mips/cavium-octeon/csrc-octeon.c

@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }

arch/mips/include/asm/bitops.h

@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
 	int num;
 
 	if (BITS_PER_LONG == 32 &&
-	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
 {
 	int r;
 
-	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
 		return 32 - x;

arch/mips/include/asm/checksum.h

@@ -40,7 +40,7 @@ static inline
 __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	return __csum_partial_copy_user((__force void *)src, dst,
 					len, sum, err_ptr);
 }
@@ -53,7 +53,7 @@ static inline
 __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, dst, len))
 		return __csum_partial_copy_user(src, (__force void *)dst,
 						len, sum, err_ptr);

arch/mips/include/asm/compat.h

@@ -3,7 +3,6 @@
 /*
  * Architecture specific compatibility types
  */
-#include <linux/seccomp.h>
 #include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>

arch/mips/include/asm/cpu-features.h

@@ -147,6 +147,15 @@
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz	cpu_has_mips_r
+# endif
+
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif

arch/mips/include/asm/div64.h

@@ -6,105 +6,63 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#if BITS_PER_LONG == 64
 
 #include <linux/types.h>
 
-#if (_MIPS_SZLONG == 32)
-
-#include <asm/compiler.h>
-
 /*
  * No traps on overflows for any of these...
  */
 
-#define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot32, __mod32; \
-	unsigned long __cf, __tmp, __tmp2, __i; \
-	\
-	__asm__(".set	push\n\t" \
-		".set	noat\n\t" \
-		".set	noreorder\n\t" \
-		"move	%2, $0\n\t" \
-		"move	%3, $0\n\t" \
-		"b	1f\n\t" \
-		" li	%4, 0x21\n" \
-		"0:\n\t" \
-		"sll	$1, %0, 0x1\n\t" \
-		"srl	%3, %0, 0x1f\n\t" \
-		"or	%0, $1, %5\n\t" \
-		"sll	%1, %1, 0x1\n\t" \
-		"sll	%2, %2, 0x1\n" \
-		"1:\n\t" \
-		"bnez	%3, 2f\n\t" \
-		" sltu	%5, %0, %z6\n\t" \
-		"bnez	%5, 3f\n" \
-		"2:\n\t" \
-		" addiu	%4, %4, -1\n\t" \
-		"subu	%0, %0, %z6\n\t" \
-		"addiu	%2, %2, 1\n" \
-		"3:\n\t" \
-		"bnez	%4, 0b\n\t" \
-		" srl	%5, %1, 0x1f\n\t" \
-		".set	pop" \
-		: "=&r" (__mod32), "=&r" (__tmp), \
-		  "=&r" (__quot32), "=&r" (__cf), \
-		  "=&r" (__i), "=&r" (__tmp2) \
-		: "Jr" (base), "0" (high), "1" (low)); \
-	\
-	(res) = __quot32; \
-	__mod32; })
+#define __div64_32(n, base)						\
+({									\
+	unsigned long __cf, __tmp, __tmp2, __i;				\
+	unsigned long __quot32, __mod32;				\
+	unsigned long __high, __low;					\
+	unsigned long long __n;						\
+									\
+	__high = *__n >> 32;						\
+	__low = __n;							\
+	__asm__(							\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	noreorder				\n"	\
+	"	move	%2, $0					\n"	\
+	"	move	%3, $0					\n"	\
+	"	b	1f					\n"	\
+	"	 li	%4, 0x21				\n"	\
+	"0:							\n"	\
+	"	sll	$1, %0, 0x1				\n"	\
+	"	srl	%3, %0, 0x1f				\n"	\
+	"	or	%0, $1, %5				\n"	\
+	"	sll	%1, %1, 0x1				\n"	\
+	"	sll	%2, %2, 0x1				\n"	\
+	"1:							\n"	\
+	"	bnez	%3, 2f					\n"	\
+	"	 sltu	%5, %0, %z6				\n"	\
+	"	bnez	%5, 3f					\n"	\
+	"2:							\n"	\
+	"	 addiu	%4, %4, -1				\n"	\
+	"	subu	%0, %0, %z6				\n"	\
+	"	addiu	%2, %2, 1				\n"	\
+	"3:							\n"	\
+	"	bnez	%4, 0b\n\t"					\
+	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	.set	pop"						\
+	: "=&r" (__mod32), "=&r" (__tmp),				\
+	  "=&r" (__quot32), "=&r" (__cf),				\
+	  "=&r" (__i), "=&r" (__tmp2)					\
+	: "Jr" (base), "0" (__high), "1" (__low));			\
+									\
+	(__n) = __quot32;						\
+	__mod32;							\
+})
 
-#define do_div(n, base) ({ \
-	unsigned long long __quot; \
-	unsigned long __mod; \
-	unsigned long long __div; \
-	unsigned long __upper, __low, __high, __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__high = __div >> 32; \
-	__low = __div; \
-	__upper = __high; \
-	\
-	if (__high) \
-		__asm__("divu	$0, %z2, %z3" \
-			: "=h" (__upper), "=l" (__high) \
-			: "Jr" (__high), "Jr" (__base) \
-			: GCC_REG_ACCUM); \
-	\
-	__mod = do_div64_32(__low, __upper, __low, __base); \
-	\
-	__quot = __high; \
-	__quot = __quot << 32 | __low; \
-	(n) = __quot; \
-	__mod; })
+#endif /* BITS_PER_LONG == 64 */
 
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
-	unsigned long __quot; \
-	unsigned int __mod; \
-	unsigned long __div; \
-	unsigned int __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__mod = __div % __base; \
-	__quot = __div / __base; \
-	\
-	(n) = __quot; \
-	__mod; })
-
-#endif /* (_MIPS_SZLONG == 64) */
-
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */

arch/mips/include/asm/dma-mapping.h

@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	enum dma_data_direction direction);
 extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int nhwentries, enum dma_data_direction direction);
 extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,

arch/mips/include/asm/fixmap.h

@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	return __virt_to_fix(vaddr);
 }
 
+#define kmap_get_fixmap_pte(vaddr)					\
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
 /*
  * Called from pgtable_init()
  */

arch/mips/include/asm/hazards.h

@@ -138,8 +138,9 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-      defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.

arch/mips/include/asm/highmem.h

@@ -30,8 +30,6 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */